In my data flow task, I use a data reader source to get data from our 400. Currently, I have a simple sql command that is pulling data from a file qualifying by date, which is hard-coded. I would like to pass in a parameter which has the date in it. How can I do this? Thanks!
Does anyone know how to parse an input variable to a stored proc? For example, if I have an input variable that is: 'ford,chevy,pontiac' how do I parse through this variable and handle each value independently?
Since I do not know how many values may exists I can't do it based on a set amount of input variables.
Hey Guys,
Heres my issue. please help
I have xml files and xslt files are in seperate folders. and each xml file has its own xslt. I've got the for loop riunning which loops thro the metadata table. This table has the file and folder localtions of xml and its corresponding xslt.
I'm using the transform xml task in control fllow. i dont see an option to set input xml name and folder from Variable in transform xml component properties? It seems to expect fully qualified path. is there an alternative? or what am i doing wrong?
I am trying to Execute a Stored Procedure using Call OSQL from a .bat file, and passing a DOS variable to the Stored Procedure.
The DOS variable is established in the DOS command...
set SERVERJOB=JOBNAME
I have tried...
EXEC sp_procedure %SERVERJOB%
With this, I get an error...
sg 170, Level 15, State 1, Server ABCDEFGH, Line 20
Line 20: Incorrect syntax near '%'.
If I put the variable name in quotes on the EXEC statement above, the value used is the variable name, %SERVERJOB% itself rather than the value the variable was set to, which would be JOBNAME in the above example.
Any ideas??? Thanks!
We are trying to use the Import/export wizard to load a text file to a SQL Server 2005 database. The input file has a variable number of columns per row. For example, the first row has 3 columns, the second has 7, the third has 3, etc. The number of columns varies from 2 to 9 in the input file. The columns are separated by an uptick (`) and the rows are terminated by {CR}{LF}. We are using code page 1252. On processing, the wizard reads the first row (with 3 columns) ok, but then assumes all the other rows have 3 columns and parses the rows accordingly, ignoring the field and row terminators.
The process worked fine with SQL Server 2000. Is there some setting that we are missing, or some configuration on the database that we should be checking?
Thank You
Is there any way to use table variable as input to a function or stored procedure?
View 3 Replies View RelatedHello,
I need to create a view which will include an additional table every week of our financial year.
Example: Every week we create a table called Sales_YYYY_WW where YYYY is the Year and WW is the Week, so after the first week we have the table Sales_2007_01 and after the second week we have Sales_2007_01 and Sales_2007_02 etc.. These tables are created evey week and don't exist at the start of the financial year.
I'd like to create a view at the beginning of each year to encompass each table evey week as it is created. If all of the tables were there at the start of the year it would be simple:
CREATE VIEW VIEW_SALES_2007
AS
SELECT * from Sales_2007_01
UNION ALL
SELECT * from Sales_2007_02
etc.
But I don't know how to achieve this when the tables don't already exist. I don't want to have to edit the view each week to add in the new table.
Can anyone out there help me?
Hi,
I have an Execute Process Task that calls a batch file.
I need to pass in a date value to the batch file.
If I enter the value 20071018 in the "Arguments" section, it works fine.
However, I use the "Standard Input Variable", User::MyDate (which gets assigned in a previous Execute SQL Task), it bombs. The query I am using returns the date back in the format yyyymmdd. It gets assigned to a string variable, called MyDate.
e.g.)
SELECT TOP 1 CONVERT(VARCHAR, MyDate, 112) AS MyDate
FROM myTable
which result is mapped to User::MyDate
Is there any obvious reason why this doesn't work?
Thanks
Hi Everyone:
I have a quick but imp SSIS question. I have a For Each Loop Container, and inside that I wish to add a Execute SQL Task item, so I can call a sp to do some inserts/updates. The ForEachLoop container is looping thru a ADO Object source variable(which is the user variable defined by me, as a FullResultSet). In my Execute SQL Task, I would like to utilize one of the columns from the result set as an input parameter to my Stored procedure. Can someone please advise on how to do this? Please let me know if you have any more questions. I am waiting for a response... Thanks in advance.
MA
Microsoft says it is possible but I just do not see how. Here is the
link to the help file where it said that variables could be pass as
input to web methods...I do not see the check box they mention on my
IDE.
Any help would be greatly appreciated.
Thanks,
Catherine
I'm getting a type mismatch error (currently string, when I think I need Int32 ?) with the code below. I'm having difficultly setting my session variable to type Int32 and having it take up the value of RawCoDeptRowID. When I "Watch" it, it's value remains as "snCoDeptRowID". Also, not sure if my Update command and it's snCoDeptRowID input parameter is well formed? Any advice would be greatly appreciated. Thank you.
Web Page 1:
Session["snCoDeptRowID"] = Convert.ToInt32 (RawCoDeptRowID);
Web Page2:<asp:SqlDataSource ID="SqlDataSource3" runat="server"
ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
UpdateCommand="UPDATE [CompanyDepartment] SET [User_Name] = @User_Name, [FirstName] = @FirstName, [LastName] = @LastName, [Company_Name] = @Company_Name, [Department_Name] = @Department_Name WHERE [User_ID] = @snCoDeptRowID ">
<updateparameters>
<asp:parameter Name="User_Name" Type="String" />
<asp:parameter Name="FirstName" Type="String" />
<asp:parameter Name="LastName" Type="String" />
<asp:Controlparameter Name="Company_Name" Type="String" ControlID ="ListBox1" PropertyName ="SelectedValue" />
<asp:Controlparameter Name="Department_Name" Type="String" ControlID ="ListBox2" PropertyName ="SelectedValue" />
<asp:QueryStringParameter Name="User_ID" Type="Int32" QueryStringField ="@snCoDeptRowID" DefaultValue ="@snCoDeptRowID" />
</updateparameters>
</asp:SqlDataSource>
Is it possible to have an entire sql select statement as the input variable to a stored procedure? I want the stored procedure to execute the select statement.
ie.
exec sp_SomeFunc 'select * from table1 where id=1'
It may sound weird, but I have my reason for wanting to do it this way. Is this possible? if so, how do I implement this inside the stored procedure?
I am building an SSIS package that loops through a table in SQL Server and dynamically builds a select statement that i would like to use as an ole db source. I have been having a difficult time with this as the select statement that i am generating is over 200,000 characters long so using an sql variable is out of the question.
I ended up placing the select statement into a table where each row of the table represents a piece of the select. I then use an execute_sql task that selects the entire rowset from this table into a variable object. I then use a for each loop to shred the variable and concatenate it into on big string variable called user:: sql_statement that is my select.
After setting up the loop and testing to see if the user:: sql_statement variable populates correctly i then added a data flow transfer with an ole db source and destination. I then go into the advanced editor for the source and set it to accept an sql statement from a variable and use my user:: sql_statement variable. I was forced to set validate external metadata option to false to avoid an error since there is no way to validate the columns until the for each loop runs during run time.
Now thats all fine and good but what is causing my problem is that during run time, when the package gets to the data flow task, the select statement doesn't seem to be populating the input columns of the data source. I have been searching to no avail on a way to tell the data source to update the input columns but every time it gets there, the package bombs out telling me the ole db source has no available output columns.
Specifically the error i get is :
[DTS.Pipeline] Error: "output "OLE DB Source Output" (6616)" contains no output columns. An asynchronous output must contain output columns.
Any help with this would be much appreciated.
I've encountered a new problem with an SSIS Pkg where I have a seq. of Execute SQL tasks. My question are:
1) In the First Execute SQL Task, I want to store a single row result of @@identity type into a User Variable User::LoadID of What type. ( I tried using DBNull Type or Object type which works, not with any other type, it but I can't proceed to step 2 )
2) Now I want to use this User::LoadID as input parameter of What type for the next task (I tried using Numeric, Long, DB_Numeric, Decimal, Double none of there work).
Please give me solutions for the above two..
Im trying to determine the best way to store data gathered from a form that a user will fill out online. The form is dynamic and is customized at run time based on group-specific criteria. The end result is a form that might have 3 extra text boxes, 2 extra sets of radio buttons and a freeform textbox, whereas for another group, there might be a slightly different set of input fields. Now comes the issue of storing this data. Since the fields can be somewhat dynamic, it could get tricky to define table columns for each possible input field. So Im considering storing the data as xml. Has anyone else had to build custom forms and ended up storing the data as xml ?
View 2 Replies View RelatedI'm seeing where previous developers have used a single stored procedure for multiple reports, where each report required different columns to be returned. They are structured like this:
CREATE PROCEDURE dbo.GetSomeData (@rptType INT, @customerID INT)
AS
BEGIN
IF @rptType = 1
BEGIN
SELECT LastName, FirstName, MiddleInitial
[Code] ....
As you can see, the output depends on the given report type. I've personally never done this, but that's more because it's the way I learned as opposed to any hard facts to support it.
So what I'm looking for is basically 2-fold.
Hi to all,
We have 4 client machine and 1 server machine, that server have all the sql server 2005 database€™s.
A project developed from client1 with Asp.net 2005 now I need to access that project from client2 so I type http://My Ip address/Folder Name/home.aspx in my browser here when the sql connection is open(SqlConnection.Opn()) then I meet this problem
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Please reply me.
Hi all,
While working on the Integration Services project.
When I try to create a new Data Connection in Connection Managers for ADO .NET SAP Provider, it gives the following exception:
TITLE: Microsoft Visual Studio
------------------------------
Could not set the connection qualifier for the current connection.
------------------------------
ADDITIONAL INFORMATION:
Could not create a connection for the provider invariant name 'Microsoft.Adapters.SAP.SAPProvider'. Verify that this provider is installed correctly on this computer. (Microsoft.DataTransformationServices.Design)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=CouldNotCreateConnection&LinkId=20476
------------------------------
Object reference not set to an instance of an object. (Microsoft.Adapters.SAP.SAPProvider)
------------------------------
BUTTONS:
OK
------------------------------
Can anyone describe, what is the resolution for the same.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
I am getting this error and using this connection string
Data Source=192.168.0.100;Network Library=DBMSSOCN;Initial Catalog=ENet;User ID=eonline;Password=eonline;
What can be solution for this.
Hi, I am working on VS 2005 and using SQL 2005 Express and i am processing excel files and inserting records in data base as i processing starts and almost after processing 600 i got this error provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server. how can i solve that thanx
View 3 Replies View RelatedHi,
My .NET 2005 application is on a server outsite company's domain. SQL server is in domain and port for sql server is open. TCP/IP is set for remote connection in SQL Server. Connection string in .config is
<add name="X_Conn" connectionString="Data Source=XXX;Initial Catalog=XXX;User ID=XX; Password=XXX;" providerName="System.Data.SqlClient"/>
I receive the error below:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
thanks a lot in advance!
We just changed the dev environment to sqlagent. From then we were unable to see the reports on the report server because:
An error has occurred during report processing.
Cannot create a connection to data source 'IHRSDataSource'.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
this error is cropping up.
To Resolve this issue, we checked the Surface Area Configuration and also checked the Reporting Service Configuration . There seem to be no problem and everything looks ok.
Please help me in resolving this issue.
After I installed the various service packs via Windows Update, my WindowsForms application can no longer connect to the server.
The error message is:
provider: Named Pipe Provider, error: 40 - Could not open connection to SQL server.
However, the Reporting Services work just fine.
Please help.
Hi to all,
We have 4 client machine and 1 server machine, that server have all the sql server 2005 database€™s.
A project developed from client1 with Asp.net 2005 now I need to access that project from client2 so I type http://My Ip address/Folder Name/home.aspx in my browser here when the sql connection is open(SqlConnection.Opn()) then I meet this problem
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Please reply me.
Hi All,
I am new to dotnet. I tried connecting to the database MS SQL Server 2000. I gave the code like, the one below, in form load event,
SqlDataReader dr = null;
SqlConnection myConnection = new SqlConnection("Data Source=IP;Initial Catalog=name;User Id=uid;Password=pwd;");
myConnection.Open();
myConnection.Close();
But I could not connect. The error message highlights the line myConnection.Open() and displays the error
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
It tries connecting to SQL Server 2005. There is no SQL Server 2005 in that system. There is only SQL Server 2000.
I have the aspx code in my local system and the database in another machine.
Could Someone please help me out in solving this problem.
Thanks,
Arun. S
hi all
I realised this has been done to death, and so much information out there but I am still in a quandry.
I have had to rebuild my computer.
This is what I did
XP machine
using SQL Server 2005 Standard Edition
using Windows Authentication
NZ6(MSSQLSERVER)
straight default install all the way
unfortunately when ready to run reports from my instance(computer)
I received the error as in provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
thought I had it all okayed but obviously something not right
so ended up unistalling then - did the following:
Load SQL Server from disc1 and start install
failed on alter Counter Registry key error
fixed this from KB article (known error that can happen)
restarted
Went to Windows Update
check IIS is installed - tick is on - IIS - admin tools - make sure asp2 is associated - yes ok
Then back to install sql server - there is no instance set up yet
Disk 2 and setup .exe
All ok on Reporting Services, Analysis etc.
But once again all seems fine but still getting the error:
connection is all fine in Management Studio - eg I can see tables etc
connection is all fine in Business Intelligence - eg I can preview my reports
I then can deploy up to - NZ6
open NZ6
eports
report is there fine - but just errors
some simple little tick that I have not done!!
I seem to have checked and rechecked everything and obviously doing another re-install does not seem a logical step from here.
I will continue to check but if someone jump in and advise please would be great.
cheers
jewel
Hi
I am creating a web site using Visual Studio 2008 & trying to connect to database on SQL Server 2000. My test connection is successful but while debugging the page I am getting this error :
" provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server "
Your suggestions on that will be appreciated.
Thanks
Ashok
Guys!
has MS done Anything about this issue? I am running NT2K and have the same issue y'all having
provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
Does anyone have a fix or a workaround that will work once the application goes live?
Hi,
Am getting the followning error:
{"An error has occurred while establishing a connection to the server. When
connecting to SQL Server 2005, this failure may be caused by the fact that under
the default settings SQL Server does not allow remote connections. (provider: Named
Pipes Provider, error: 40 - Could not open a connection to SQL Server)"}
from my application where 3 service references had been added
and hav added this segment in app.config file
<configSections>
<section name="dataConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Data.Configuration.DatabaseSettings, Microsoft.Practices.EnterpriseLibrary.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=null" />
</configSections>
<dataConfiguration defaultDatabase="Connection String" />
<connectionStrings>
<add name="Connection String" connectionString="Data Source=DPA1W075Binstancename;Initial Catalog=SoapBox;Integrated Security=SSPI;"
providerName="System.Data.SqlClient" />
</connectionStrings>
Solutions recommended for this were start running the SQL browser instance and enable Namespipes in Sqlserver configuration manager.Did both.. but nothing worked.
Still getting the same error..
Can somebody plz help me?
Hi guys, I have a problem with error: 40.
I made a Web page, and it works perfect on my local machine, everything is OK, until I uloaded page to the server, it reports this error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735091
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770
System.Web.UI.WebControls.Repeater.GetData() +50
System.Web.UI.WebControls.Repeater.CreateControlHierarchy(Boolean useDataSource) +232
System.Web.UI.WebControls.Repeater.OnDataBinding(EventArgs e) +53
System.Web.UI.WebControls.Repeater.DataBind() +72
System.Web.UI.WebControls.Repeater.EnsureDataBound() +55
System.Web.UI.WebControls.Repeater.OnPreRender(EventArgs e) +12
System.Web.UI.Control.PreRenderRecursiveInternal() +77
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
I dont't Know what to do. Please HELP!
Hi all,
I am currently on XP x64 and am trying to run a .vbs file, which needs access to an access file when the following error pops up:
"Provider is not specified and there is no designated default provider"
error code: 800a0ea9
source: ADODB.Connection
I have tried a bunch of stuff, but so far nothing has worked.
The following code is is question:
set AccessDB = CreateObject("ADODB.Connection")
AccessDB.Open("DRIVER={Microsoft Access Driver (*.mdb)}; DBQ=" & sMSAccessDBPath)
any help would be appreciated......could I run this with cscript.exe (in the WoW64 folder) in through cmd.exe?
Thanks in advance for you help.
Jonathan
I've just posted mywebsite andthis error keep being trhrown as soon as I access the DB
I dont understand what is going on and if I dont get it working bu today will delivery date will expire and I will get in trouble...
So anyone knows what is going on
It says the following:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Here is my con string :
<add name="ASPNETDBConnectionString" connectionString="Data Source=p3swhsql-v09.shr.secureserver.net;Initial Catalog=myCatalog;User ID=MyID;Password='Mypassword"/>
Thanks a lot
I am getting the following error when i try to connect to the my web site using froma different server. A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) i am using sql express and i attach the database through the connection string in the web config. Any ideas
View 1 Replies View Related