Using One Alias For Mutiple Columns In A SELECT Statement
Feb 8, 2006
Hi all,
Is this at all possible? In the following query I have mutiple columns in my SELECT statement that each have their own alias. Is it possible that I can use just one Alias for all these columns (such as Address), and if so how is it done?
Code:
SELECTRTRIM(ISNULL(ta.house_no_flat, '')) as [Target - Flat No.],
LOWER(RTRIM(ISNULL(ta.building, ''))) as [Target - Building],
LOWER(RTRIM(ISNULL(ta.road_street, ''))) as [Target - Street],
LOWER(RTRIM(ISNULL(ta.district, ''))) as [Target - District],
LOWER(RTRIM(ISNULL(ta.town, ''))) as [Target - Town],
LOWER(RTRIM(ISNULL(ta.county, ''))) as [Target - County],
RTRIM(ISNULL(ta.postcode, '')) as [Target - PostCode]
Thanks
Tryst
View 2 Replies
ADVERTISEMENT
Feb 8, 2006
Hi all,Is this at all possible? In the following query I have mutiple columns in my SELECT statement that each have their own alias. Is it possible that I can use just one Alias for all these columns (such as Address), and if so how is it done?SELECT RTRIM(ISNULL(ta.house_no_flat, '')) as [Target - Flat No.], LOWER(RTRIM(ISNULL(ta.building, ''))) as [Target - Building], LOWER(RTRIM(ISNULL(ta.road_street, ''))) as [Target - Street], LOWER(RTRIM(ISNULL(ta.district, ''))) as [Target - District], LOWER(RTRIM(ISNULL(ta.town, ''))) as [Target - Town], LOWER(RTRIM(ISNULL(ta.county, ''))) as [Target - County], RTRIM(ISNULL(ta.postcode, '')) as [Target - PostCode]ThanksTryst
View 2 Replies
View Related
Sep 5, 2007
Hello All
Firstly thanks a lot Phil and Jamie on such a helpful article on "Checking to see if a record exists and if so update else insert"
Here is my question
I have about 10 tables and there respective working tables
For examples: A, B, C, D, E.... and WorkA, WorkB, WorkC....
Notes:
1) When I execute a package these work table (Work A, WorkB ...) get populated with certain rows say about 5
2) Its not that all the work table are populated on every execution.
3) Tables A, B, C... have thousands of records in it.
4) Work table is of same structure as there parent table..Like WorkA same structure as A.....
5) The table A and WorkA and as on... are linked with a KeyID
Now I want to build a SSIS package that can
1) Get the the data from these multiple tables(WorkA, WorkB...)
2) Process each row of these tables WorkA, WorkB..
3) Depending upon the KEYID of WorkA., WorkB.. etc Update a Flag colunm of table A, B...where the KeyID is equal to KeyID of Work Table
4) After updating insert that processed row of Work A, WorkB ...into Table A, B..
I can do this if I have one source table and one destination table. Here i have some say 10 randomly source tables to respective random destination .
All I could think of creating 10 different packages as adviced in Jamie's article. But I am sure there might some other alternative.
Can somebody advice me the best practice of doing this. Thanks a lot in advance
View 5 Replies
View Related
Apr 28, 2004
Afer I am getting a DataSet from SELECT* statement I would like to know the value of each field
How do I do that?
View 1 Replies
View Related
Oct 7, 2004
Can you please tell me, is it possible to Trim the columns in a select statement:
select eventid,referenceno,EventDesciption,modulename,moduleid,created_by,CONVERT(varchar(10),eventdate,101) as eventdate from MYTable
Thank you very much.
View 1 Replies
View Related
Feb 18, 2005
Maybe its a friday, but I can't figure out how to total the returned results so I just get a sum of the 'Items' and 'Total'. I thought it was Compute but that did not work!
I'm pulling data from 2 tables, Order and Order_Item and what Im trying to achieve is to total up how many items were sold and the total. Each one of the rows below are for each order.
I must be doing something wrong, can anyone help?
SELECTsum(Order_Item.Quantity) as Items,
sum(Order_Item.Price*Order_Item.Quantity)-[Order].Discount as Total
FROM[Order]
JOINOrder_Item ON Order_Item.[OrderID] = [Order].[ID]
GROUP BY[Order].[ID],
[Order].OrderRef,
[Order].CustomerID,
[Order].ReceivedDate,
[Order].Postage,
[Order].Discount
ORDER BY [Order].ReceivedDate DESC
Items Total
==== =====
114.9900
113.5920
333.6750
227.1840
567.9600
View 3 Replies
View Related
Jan 23, 2015
I am retrieving some data from Invoices, Customers and Companies tables as follows, but would like to make the customerName and the Companies.Name as single column such Name and similarly for customerID/companyID and customerCode/companyCode.
Code:
with cte
as
(
selectdistinct i.invoiceNumber, itemID, customers.customerID, Companies.companyID
,SUM(net_weight) as totalWeight, rate
,(select SUM(net_weight) * rate) as amount
[code]....
View 6 Replies
View Related
Jan 30, 2008
Hi!
I have a select question that look like this:
DECLARE @ID uniqueidentifier;
SET @ID = '40bd3052-60f4-414a-99df-ca882c128493';
SELECT
rp.ID AS ReportPackId
,rp.SupplierPartyIdentifier AS SupplierPartyIdentifier
,rpap.AdditionalPartyIdentifier AS AdditionalPartyIdentifier
FROM
ReportPack rp
INNER JOIN ReportPackAdditionalParty rpap
ON rpap.fk_ReportPack = rp.ID
WHERE rp.ID = @ID
The result a get when running the select question is:
ReportPackId
SupplierPartyIdentifier
AdditionalPartyIdentifier
40BD3052-60F4-414A-99DF-CA882C128493
String
addPartyId1
40BD3052-60F4-414A-99DF-CA882C128493
String
addPartyId2
My problem is that the result I want is the following:
ReportPackId
SupplierPartyIdentifier
AdditionalPartyIdentifier
AdditionalPartyIdentifier
40BD3052-60F4-414A-99DF-CA882C128493
String
addPartyId1
addPartyId2
I always know that the ReportPackId and SupplierPartyIdentifier will be identical for all rows because of the Where condition, and therefore I want all AdditionalPartyIdentifiers to be in columns instead of a new row. Is this possible?
View 5 Replies
View Related
Nov 12, 2007
Does tsql allow sth like
Select col1*col2 as ComputedColumn, ComputedColumn + 2 as NewColumn
From T_Table
THis is possible in Access.
View 5 Replies
View Related
Jul 16, 2006
To clarify, I'm trying to create a hiearchial grid that will display projects and their sub projects.
The page the sproc is servicing is a search page where a user can display all projects by a customer or they can enter in a projectID and return info that way. Thus you'll see If else in what I have listed below. I highlighted in red the 2nd select statement I'm trying to get to run. One problem is I'm getting an error:
Msg 156, Level 15, State 1, Procedure sp_GetProjects, Line 33
Incorrect syntax near the keyword 'ELSE'.
Think this has something to do with me trying to run 2 select statements in an IF. Secondly, I'm not sure exactly what syntax I need to use to accomplish what I'm trying to do. Again, the first select statement is creating a table with all projects that match the passed custID, the second select statement I'm trying to generate a 2nd table that will take the projectID for each row returned to the first table and find all rows with the same projectID's in the BillGroup table.
I need these two tables returned to a dataset I'm populated with a sqldataadapter in .net so I can create a relationship between the two tables and then bind to a grid.
@custID nchar(25) = NULL,
@projectID bigint = NULL
IF @custID != 'null'
SELECT p.projectID, p.Description FROM Projects p
WHERE custID = @custID
SELECT * FROM Projects p
JOIN dbo.BillGroups bg ON p.projectID = bg.projectID
ELSE IF @projectID != -1
SELECT projectID, Description FROM Projects
WHERE projectID = @projectID
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
END
View 3 Replies
View Related
Oct 9, 2007
I'm wondering if there is a single statement I can write to pull my data. Let's say my Order table has one field for userId and one field for supervisorId (among other fields) both of which are foreign keys into the Users table where their name, address, etc. are stored. What I'd like to do is to pull all the rows from Order and have a join that pulls the user name and supervisor name from the User table all in one go. Right now I pull all the Orders with just user name joined, and then go back over the objects to add the supervisor name as a separate query.
The reason I'd like to do this is to simplify the objects I'm passing to the GridView by doing a single fetch instead of multiples. I'm using SQL Server, .NET 2.0 and VS.NET 2005.
Thanks
View 1 Replies
View Related
Jul 19, 2006
Hello,
I've been busy all night searching and reading trying to figure out how I can do the following.
I have a table that tracks user IDs in multiple fields. When I select records from this table I need a way to resolve those ID fields back into user names by referencing the users table. SQL statement thus far...
SELECT A.Username as NameA, B.Username As NameB, FROM theTable, Users As A, Users As B WHERE theTable.UserIDA ???
How do I resolve theTable.UserIDA and theTable.UserIDB back to Users.Username so that the records returned fill the fields NameA and NameB?
Your help is greatly appreciated.
Thanks,
-Mike
Ontario, Canada
View 5 Replies
View Related
Sep 10, 2015
Created a new scheduled job using Transact-SQL.
Running a basic script SELECT FROM WHERE
As of now, it places it into one column, for all the fields.
I need the fields to be placed in their respective columns. Tried saving it as .xls and .csv. Same issue. Running SQL Server 2008R2.
View 2 Replies
View Related
Apr 23, 2008
I have built an Advanced Search page which allows users to select which columns to return (via checkbox) and to enter search criteria for any of the selected columns (into textboxes). I build the SQL statement from the properties of the controls. Works great.
My problem is getting my gridview control to play nicely. At first I used a SqlDataReader and bound the gridview to it, thus giving me the ability to run new SQL statements through it (with different columns each time). Worked nicely. But, per Microsoft, sorting can only be done if the gridview is bound to a datasource control like the SqlDataSource. So I wrote the code to handle sorting. No big deal; worked nicely. But I could not adjust the column widths programmatically unless bound to a datasource control like the SqlDataSource. And could not figure out a work around.
So, I decided to use the SqlDataSource. Works great. Except, I cannot figure out how to run a new SELECT statement through the SQLDataSource and have the gridview respond accordingly. If I try to return anything other than the exact same columns defined declaratively in the html, it pukes. But I need to be able to return a new selection of columns each time. For example, first time through the user selects columns 1,2,3,4 – the gridview should show those 4 columns. The second time the user selects columns 2,5,7 – the gridview should those 3 columns (and ONLY those 3 columns). Plus support selection and sorting.
I am desperate on this. I've burned 2.5 days researching and testing. Does anyone have any suggestions?
Thanks,
Brad
View 9 Replies
View Related
Feb 5, 2015
I have this update statement I am trying to use, to update a table. My problem is if there is no data in the select statement, it still adds number to the columns. How can I have this update statement work to put blank value in if there are no counts?
UPDATE T_AXA_BreakDown_Claims
SET [Claim Count Conm] = t2.[Claim Count Conm]
FROM T_AXA_BreakDown_Claims t1
INNER JOIN
(select
[code]....
View 2 Replies
View Related
Aug 20, 2014
I am currently trying to write a query that pulls a summation of item specific data from sales orders. For simplicity's sake, the column structure can be something like the following...
Item#,
PoundsDuringWeekNumber (this would be the current week number out of the 52 weeks in a year and the pounds of the item during that week)
However, those are not going to be the only 2 columns. The idea of the query is that the user would be able to provide the query a date range (say 2 months) and the columns would then morph into the following...
Item#,
PoundsDuringWeekNumber (current),
PoundsDuringWeekNumber(current - 1),
PoundsDuringWeekNumber (current - 2),
etc. etc.
PoundsDuringWeekNumber(current - 8)
Initial ideas where to create a function to execute the summation of the pounds during the date range of the week in question and execute it across the columns, but with the indeterminable number of columns, the query would not know how many times to execute the function.
View 1 Replies
View Related
Jul 20, 2006
Hello,
I've been busy all night searching and reading trying to figure out how I can do the following.
I have a table that tracks user IDs in multiple fields. When I select
records from this table I need a way to resolve those ID fields back
into user names by referencing the users table. SQL statement thus
far...
SELECT A.Username as NameA, B.Username As NameB, FROM theTable, Users As A, Users As B WHERE theTable.UserIDA ???
How do I resolve theTable.UserIDA and theTable.UserIDB back to
Users.Username so that the records returned fill the fields NameA and
NameB?
Your help is greatly appreciated.
Thanks,
-Mike
View 5 Replies
View Related
Jul 14, 2014
I have a table that holds notes for item's. I'm want to do a select statement where one of my columns assigns a sequential value to each row based on the item number. Would like data to look like this where doc_no would be my row_number function:
item_no seq_no note doc_no
ABC 1 blah 1
ABC 2 blahh 1
ABC 3 bla3 1
XYZ 1 more n 2
XYZ 2 another 2
EFG 1 blahhh 3
View 2 Replies
View Related
Aug 31, 2015
Below. I have also pasted the current result of this query and the desired result.
Query can be updated to get the desired result as given below?
Query:
Select c.OTH_PAYER_ID, c.PAID_DATE, f.GROUP_CODE, f.REASON_CODE, f.ADJUSTMENT_AMOUNT
From MMIT_CLAIM_ITEM b, mmit_tpl c , mmit_attachment_link d, MMIT_TPL_GROUP_RSN_ADJ f
where b.CLAIM_ICN_NU = d.CLAIM_ICN and b.CLAIM_ITEM_LINE_NU = d.CLAIM_LINE_NUM and c.TPL_TS = d.TPL_TS and f.TPL_TS = c.TPL_TS and b.CLAIM_ICN_NU = '123456788444'
Current Result which I am getting with this query
OTH_PAYER_ID PAID_DATE GROUP_CODE REASON_CODE ADJUSTMENT_AMOUNT
5501 07/13/2015 CO 11 23.87
5501 07/13/2015 PR 12 3.76
5501 07/13/2015 OT 32 33.45
2032 07/14/2015 CO 12 23.87
2032 07/14/2015 OT 14 43.01
Desired/Expected Result for which I need updated query
OTH_PAYER_ID PAID_DATE GROUP_CODE_1 REASON_CODE_1 ADJUSTMENT_AMOUNT_1 GROUP_CODE_2
REASON_CODE_2 ADJUSTMENT_AMOUNT_2 GROUP_CODE_3 REASON_CODE_3 ADJUSTMENT_AMOUNT_3
5501 07/13/2015 CO 11 23.87 PR 12 3.76 OT 32 33.45 2032 07/14/2015 CO 12 23.87 OT 14 43.01
Using DB2.
View 2 Replies
View Related
Jun 30, 2006
Hi,
I am using MsSql2005 and wondering how to create aliases inside update statements. I need this, for a table variable inside a procedure.
UPDATE @TempTable
SET Field1 = (
SELECT
RealTable.Field2
FROM
RealTable
WHERE
RealTable.Field1 = @TempTable.Field1)
This statement doesn't work because I need to use an alias for @TempTable.
How?
Thanx a lot
View 4 Replies
View Related
May 20, 2004
When I created a CASE statement (This is at work, Pat:)) it is about 30-40 lines long. I gave it a name and set the name = to the case statement:
ie,
SELECT fieldname1 =
CASE
WHEN condition THEN 'blah blah'
WHEN condition THEN 'blah blah'
WHEN condition THEN 'blah blah'
ELSE thisandthat
END
, fieldname2
, fieldname3
FROM tablename1
GROUP BY CASE
WHEN condition THEN 'blah blah'
WHEN condition THEN 'blah blah'
WHEN condition THEN 'blah blah'
ELSE thisandthat
END, , fieldname2, fieldname3
etc.
The long CASE statement in my GROUP BY is awkward to me. Is this the only way to do it? I tried using the fieldname1 but it comes back as an invalid field name and asks for the "expression".
Regards,
Dave
View 5 Replies
View Related
Nov 25, 2006
Hi,
I have a question.
select name, count, 1 Aa c1, 2 as c2, c1+c2 As total
from table1
From this example, the program will give out error message,
c1, and c2 are invalid columns.
In MS Access, it works. But, SQL query Analayer doesn't work this statement.
So, does query analayzer handle this case?
Thanks.
View 3 Replies
View Related
Oct 6, 2014
I have a bit of trouble getting values into one alias field, my code is below. I am trying to get values into the alias extension, Agent_ID is sometimes null, and so is agent_id2, however sometimes they both have values in them, and then only one of the values is every returned. When in the example below only Agent_ID (11111) is ever returned by I want both of them returned.
Agent_ID Agent_ID2
11111 22222
<code>
SELECT DISTINCT
CASE WHEN [AGENT_ID] is not null then AGENT_ID
when agent_id2 is not null then agent_id2 end as extension
FROM [AA_Helper].[dbo].[tblEmpData]
</code>
View 9 Replies
View Related
Jun 26, 2007
Hi,I got 'Invalid Column Name NewCol1' when I query the following:Select col1, col2, (some calculation from the fields) as NewCol1,(some calculation from the fields) as NewCol2,NewCol1 = NewCol2 fromTable1 inner join Table2 inner join Table3....Where.....Basically, I want to find out if NewCol1 = NewCol2 after thecalculationAny advice?Thanks in advance. Your help would be greatly appreciated.Wanda
View 5 Replies
View Related
Nov 24, 2015
We will be moving 2 different databases (SS2005 & SS2008) to a new SS2014 SQL Server. Currently our codes looks something like Server1DBInstance1... & Server2DBInstance2... Is it possible to move the objects from these 2 instances to Server3DBInstance3 and then use an alias to reference the objects? Or does Server3 need to have DBInstance1 & DBIstance2? Basically, is the alias just for the database or for the instance too? Can I create an alias "Server1DBInstance1' on Server3DBInstance3 and assign objects to that alias?
View 16 Replies
View Related
Sep 3, 2007
Hello... im having a problem with my query optimization....
I have a query that looks like this:
SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)
it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...
View 3 Replies
View Related
Apr 29, 2015
I have a business need to create a report by query data from a MS SQL 2008 database and display the result to the users on a web page. The report initially has 6 columns of data and 2 out of 6 have JSON data so the users request to have those 2 JSON columns parse into 15 additional columns (first JSON column has 8 key/value pairs and the second JSON column has 7 key/value pairs). Here what I have done so far:
I found a table value function (fnSplitJson2) from this link [URL]. Using this function I can parse a column of JSON data into a table. So when I use the function above against the first column (with JSON data) in my query (with CROSS APPLY) I got the right data back the but I got 8 additional rows of each of the row in my table. The reason for this side effect is because the function returned a table of 8 row (8 key/value pairs) for each json string data that it parsed.
1. First question: How do I modify my current query (see below) so that for each row in my table i got back one row with 19 columns.
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*
FROM PRODUCT A
CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B
If updated my query (see below) and call the function twice within the CROSS APPLY clause I got this error: "The multi-part identifier "A.ITEM6" could be be bound.
2. My second question: How to i get around this error?
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*, C.*
FROM PRODUCT A
CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B, fnSplitJson2(A.ITEM6,NULL) C
I am using Microsoft SQL Server 2008 R2 version. Windows 7 desktop.
View 14 Replies
View Related
Aug 27, 2014
I'd like to first figure out the count of how many rows are not the Current Edition have the following:
Second I'd like to be able to select the primary key of all the rows involved
Third I'd like to select all the primary keys of just the rows not in the current edition
Not really sure how to describe this without making a dataset
CREATE TABLE [Project].[TestTable1](
[TestTable1_pk] [int] IDENTITY(1,1) NOT NULL,
[Source_ID] [int] NOT NULL,
[Edition_fk] [int] NOT NULL,
[Key1_fk] [int] NOT NULL,
[Key2_fk] [int] NOT NULL,
[Code] .....
Group by fails me because I only want the groups where the Edition_fk don't match...
View 4 Replies
View Related
Sep 10, 2007
I am working on a Statistical Reporting system where:
Data Repository: SQL Server 2005
Business Logic Tier: Views, User Defined Functions, Stored Procedures
Data Access Tier: Stored Procedures
Presentation Tier: Reporting ServicesThe end user will be able to slice & dice the data for the report by
different organizational hierarchies
different number of layers within a hierarchy
select a organization or select All of the organizations with the organizational hierarchy
combinations of selection criteria, where this selection criteria is independent of each other, and also differeBelow is an example of 2 Organizational Hierarchies:
Hierarchy 1
Country -> Work Group -> Project Team (Project Team within Work Group within Country)
Hierarchy 2
Client -> Contract -> Project (Project within Contract within Client)Based on 2 different Hierarchies from above - here are a couple of use cases:
Country = "USA", Work Group = "Network Infrastructure", Project Team = all teams
Country = "USA", Work Group = all work groups
Client = "Client A", Contract = "2007-2008 Maint", Project = "Accounts Payable Maintenance"
Client = "Client A", Contract = "2007-2008 Maint", Project = all
Client = "Client A", Contract = allI am totally stuck on:
How to implement the data interface (Stored Procs) to the Reports
Implement the business logic to handle the different hierarchies & different number of levelsI did get help earlier in this forum for how to handle a parameter having a specific value or NULL value (to select "all")
(WorkGroup = @argWorkGroup OR @argWorkGrop is NULL)
Any Ideas? Should I be doing this in SQL Statements or should I be looking to use Analysis Services.
Thanks for all your help!
View 1 Replies
View Related
Aug 29, 2006
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View 5 Replies
View Related
Jan 9, 2015
Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
View 4 Replies
View Related
Jul 20, 2005
hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if
View 2 Replies
View Related
Oct 29, 2007
Hi guys,
I have the query below (running okay):
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01
The results are just as I need:
Field01 Field02
------------- ----------------------
192473 8461760
192474 22810
Because other reasons. I need to modify that query to:
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:
Field02
----------------------
22810
8461760
And what I need is (without showing any other field):
Field02
----------------------
8461760
22810
Is there any good suggestion?
Thanks in advance for any help,
Aldo.
View 3 Replies
View Related
