Using Output From A Stored Procedure As An Output Column In The OLE DB Command Transformation
Dec 8, 2006
I am working on an OLAP modeled database.
I have a Lookup Transformation that matches the natural key of a dimension member and returns the dimension key for that member (surrogate key pipeline stuff).
I am using an OLE DB Command as the Error flow of the Lookup Transformation to insert an "Inferred Member" (new row) into a dimension table if the Lookup fails.
The OLE DB Command calls a stored procedure (dbo.InsertNewDimensionMember) that inserts the new member and returns the key of the new member (using scope_identity) as an output.
What is the syntax in the SQL Command line of the OLE DB Command Transformation to set the output of the stored procedure as an Output Column?
I know that I can 1) add a second Lookup with "Enable memory restriction" on (no caching) in the Success data flow after the OLE DB Command, 2) find the newly inserted member, and 3) Union both Lookup results together, but this is a large dimension table (several million rows) and searching for the newly inserted dimension member seems excessive, especially since I have the ID I want returned as output from the stored procedure that inserted it.
Thanks in advance for any assistance you can provide.
View 9 Replies
ADVERTISEMENT
Jul 3, 2006
Hi,
I am writing a Dataflow task which will take a Particular column from the source table and i am passing the column value in the SQL command property. My SQL Command will look like this,
Select SerialNumber From SerialNumbers Where OrderID = @OrderID
If i go and check the output column in the Input and output properties tab, I am not able to see this serial number column in the output column tree,So i cant able to access this column in the next transformation component.
Please help me.
Thanks in advance.
View 13 Replies
View Related
Feb 13, 2008
Hi,
I have two tables,
Table A on Server 1 (3 ROWS)
ID Name Address
ID1 A B
ID2 X Y
ID3 M N
There is another table on a different server which looks like
Table B on Server 2
PKColumn ID Details
1 ID1 Desc1
2 ID1 Desc2
3 ID1 Desc 3
4 ID2 Desc
5 ID2 Description
As you can see the ID is the common column for these two tables,
I want to get the Query the above 2 tables and the output should be dumped into a new table on Server2.
I am using the following SSIS Package
OledbDataSource-------> OledbCommand(Select * from TableB where ID =?)
From here, how can insert the rows returned from the oledb command into another table.
Since, for each row of TableA it will return some output rows...How can I insert all these into the New Table.
Please help on configuring the output of the oledb command.
Thanks,
View 5 Replies
View Related
Dec 25, 2006
While using Aggregate Transformation to group one column,the rows of output sometimes larger than the rows returned by a T-SQL statement via SSMS.
For example,the output of the Aggregate Transformation may be 960216 ,but the
'Select Count(Orderid) From ... Group By ***' T-SQL Statement returns 96018*.
I'm sure the Group By of the Aggregate Transformation is right!
But ,when I set the "keyscale" property of the transformation,the results match!
In my opinion,the "keyscale" property will jsut affects the performance of the transformaiton,but not the result of the transformation.
Thanks for your advice.
View 2 Replies
View Related
Nov 7, 2015
I want to call "oracle" stored procedure with output parameter from SSIS ole db command task.
Actually I am able to successfully call the procedure but my Output value is not updating in the mapped column.
I used below PL/SQL query.
DECLARE
IS_VALID VARCHAR2(200);
BEGIN
IS_VALID(
PARAM1 => ?,
PARAM2 => ?,
IS_VALID => IS_VALID
);
? := IS_VALID;
END;
If I try to supply "OUTPUT" word I get error:
"ORA-06550: line 1, column 45:
PLS-00103: Encountered the symbol "OUTPUT" when expecting one of the following:Â Â . ( ) , * @ % & = - + < / >"
BEGIN
IS_VALID(
?,
?,
? OUTPUT
);
END;
how to receive output parameter value of oledb command while calling oracle stored procedures.
View 4 Replies
View Related
Sep 21, 2015
Inside some TSQL programmable object (a SP/or a query in Management Studio)I have a parameter containing the name of a StoreProcedure+The required Argument for these SP. (for example it's between the brackets [])
EX1 :Â @SPToCall : [sp_ChooseTypeOfResult 'Water type']
EX2 :Â @SPToCall : [sp_ChooseTypeOfXMLResult 'TABLE type', 'NODE XML']
EX3 :Â @SPToCall : [sp_GetSomeResult]
I can't change thoses SP, (and i don't have a nice output param to cach, as i would need to change the SP Definition)All these SP 'return' a 'select' of 1 record the same datatype ie: NVARCHAR. Unfortunately there is no output param (it would have been so easy otherwise. So I am working on something like this but I 'can't find anything working
DECLARE @myFinalVarFilledWithCachedOutputÂ
NVARCHAR(MAX);
DECLARE @SPToCall NVARCHAR(MAX) = N'sp_ChooseTypeOfXMLResult
''TABLE type'', ''NODE XML'';'
DECLARE @paramsDefintion = N'@CatchedOutput NVARCHAR(MAX) OUTPUT'
[code]...
View 3 Replies
View Related
Jun 5, 2007
Hello
This is my first post so please be gentle!!
I have a stored proc that returns a value:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
SET NOCOUNT ON
GO
-- =============================================
ALTER PROCEDURE [dbo].[spPK]
-- Add the parameters for the stored procedure here
@varNSC varchar(4),
@varNC varchar(2),
@varIIN varchar(7),
@varIMCDMC varchar(8),
@varOut as int output
AS
Declare
@varPK int
set @varPK = 0
BEGIN
--This checks Method 1
--NSC = @varNSC
--NC = @varNC
--IIN = @varIIN
begin
if exists
(select Item_id
From Item
Where NSC = @varNSC
and NC = @varNC
and IIN = @varIIN)
set @varPK =
(select Item_id
From Item
Where NSC = @varNSC
and NC = @varNC
and IIN = @varIIN)
set @varOut = @varPK
if @varPK <> 0 Return
end
[There are some more methods here]
Return
END
How do I get at the output value?
I have tried using derived column and ole db command but can't seem to grasp how to pass the value to the derived column. I can get oledb command to run using 'exec dbo.spPK ?, ?, ?, ?, ? output' but don't know what to do from here.
View 10 Replies
View Related
Apr 10, 2007
I have no problem getting OLE DB Command transformations to support single returns by a procedure.
For example, exec name_of_procedure ?,?,? OUTPUT
However, I have a stored procedure which accepts 1 input and returns 5 outputs. This procedure works fine at the command line but when I try to incorporate it into a OLE DB Command I don't get the multiple values returned. There's no problem at all configuring the transform as it recognizes all input and output parameters. For some reason I just don't get values returned.
thanks
John
View 14 Replies
View Related
Oct 18, 2006
1 public static List<string> viewtree(int root)
2 {
3 SqlConnection con = new SqlConnection(mainConnectionString);
4 con.Open();
5 try
6 {
7 List<string> ids = new List<string>();
8 SqlCommand command = new SqlCommand(@"ShowHierarchy2", con);
9 command.Parameters.AddWithValue("@root", root);
10 command.Parameters.Add(new SqlParameter("@outstring", SqlDbType.VarChar));
11 command.Parameters["@outstring"].Direction = ParameterDirection.Output;
12 command.CommandType = CommandType.StoredProcedure;
13 //command.ExecuteScalar();
14 //ids = command.Parameters["@outstring"].Value.ToString();
15
16 SqlDataReader dr = command.ExecuteReader();
17 while (dr.Read())
18 {
19 ids.Add((dr["@outstring"].ToString()));
20 }
21 //command.Parameters.Clear();
22
23 return ids;
24 }
25 finally
26 {
27 con.Close();
28 }
29 }
Can someone tell me why i'm getting the following error:String[1]: the Size property has an invalid size of 0. Thanks in advance
View 7 Replies
View Related
Apr 3, 2004
I have a variable @NetPay as type money, and a stored proc spGetNetPay.
The output of spGetNetPay has one column NetPay, also with type of money, and always has one row.
Now I need assgin output from spGetNetPay to user variable @NetPay. How can I do That?
Set @NetPay = (Exec spGetNetPay) Sorry this does not work. Is it possible to create a user defined function?
I have little knowledge about User defided function. Is is the way I should go?
Thanks.
David J.
View 3 Replies
View Related
Jul 4, 2001
I'm calling a stored procedure from outside program using
Execute SPid(a stored procedure).
In the SPid procedure i want to return a value using
Output.
Can any one tell me how do it since i never used it before ?
View 3 Replies
View Related
Sep 27, 2000
Hi
I am running a stored procedure which first puts the data in a temp table and then gives the output...
the output is supposed to generate a report based on data from temp table
However when i run it, the first 2 statements are
(15345 row(s) affected)
(407 row(s) affected)
abd then the select statement runs...due to this, the report in ASP returns an error...does anyone know how i can suppress the first 2 lines and get only the actual data as output
any help will be appreciated
regards,
View 3 Replies
View Related
Apr 11, 2002
When I run a script in query analyzer using a script (A "GO" statement exists after each SQL) I get the results on screen as soon as each query completes. When I run thru stored proc, I can get the result only after the whole procedure completes execution. Is there any way to get the outpout immediately as soon as each query completes? This will be useful in tracking thre progress of a stored proc.
Thanks
Satish
View 2 Replies
View Related
Feb 8, 2007
I am using a stored procedure to query tables and format a record to write to a file. Below is the syntax I'm using to do the write.
set @cmd = 'echo ' + rtrim(@patient_rec) + ' >> f:output
ecall.csv'
exec master..xp_cmdshell @cmd
The procedure will write about 30,000 records or so and then quit writing to the file. Is there a setting I have to modify to write more records or is there a better way to do this?
View 6 Replies
View Related
May 25, 2006
Dear All,How can I show the resultrecords of a SP.I can be done by doubleclick the SPname?But how to do it by code.I want the following interfaceIn my form the user1 selects a SP (combobox showing a userfrinly name)2 adds the related parameters3 and then click the show result-buttonbut the .execute command doen't show teh records.I want the same output as you have doublclicking the SPname in theobjectwindow.Thanks,Filip
View 1 Replies
View Related
Aug 19, 2007
I have two stored procedures one generates an output parameter that I then use in the second stored procedure.
1 Try2 Dim myCommand As New SqlCommand("JP_GetChildren", myConn)3 myCommand.CommandType = Data.CommandType.StoredProcedure4
5 myCommand.CommandType = Data.CommandType.StoredProcedure6 myCommand.Parameters.Add(New SqlParameter("@ParentRule", Data.SqlDbType.NVarChar))7 myCommand.Parameters.Add(New SqlParameter("@PlantID", Data.SqlDbType.NVarChar))8 myCommand.Parameters.Add(New SqlParameter("@New_ReleasingRulePrefix", Data.SqlDbType.NVarChar))9 myCommand.Parameters.Add(New SqlParameter("@New_ReleasingRuleSuffix", Data.SqlDbType.NVarChar))10 myCommand.Parameters.Add(New SqlParameter("@New_PlantID", Data.SqlDbType.NVarChar))11 myCommand.Parameters.Add(New SqlParameter("@New_RuleSetID", Data.SqlDbType.NVarChar))12 myCommand.Parameters.Add(New SqlParameter("@Count", Data.SqlDbType.Int))13 myCommand.Parameters.Add(New SqlParameter("@IDField", Data.SqlDbType.NVarChar))14
15 Dim OParam As New SqlParameter()16 OParam.ParameterName = "@IDFieldOut"
17 OParam.Direction = ParameterDirection.Output18 OParam.SqlDbType = SqlDbType.NVarChar19 myCommand.Parameters.Add(OParam)20
21
22 myCommand.Parameters("@ParentRule").Value = txtParentRule.Text23 myCommand.Parameters("@PlantID").Value = txtStartingPlantID.Text24 myCommand.Parameters("@New_ReleasingRulePrefix").Value = txtReleaseRuleFromPrefix.Text25 myCommand.Parameters("@New_ReleasingRuleSuffix").Value = txtReleaseRuleFromSuffix.Text26 myCommand.Parameters("@New_PlantID").Value = txtEndingPlantID.Text27 myCommand.Parameters("@New_RuleSetID").Value = txtEndingRuleSetID.Text28 myCommand.Parameters("@Count").Value = 129 myCommand.Parameters("@IDField").Value = " "
30 myCommand.Parameters("@IDFieldOut").Value = 031
32 myCommand.ExecuteNonQuery()33
34 Dim IDField As String = myCommand.Parameters("@IDFieldOut").Value35
If i run this stored procedure in sql it does return my parameter. But when i run this code IDField comes back null. Any ideas
View 6 Replies
View Related
Oct 23, 2007
HiI have this code snippet[CODE] string connstring = "server=(local);uid=xxx;pwd=xxx;database=test;"; SqlConnection connection = new SqlConnection(connstring); //SqlCommand cmd = new SqlCommand("getInfo", connection); SqlDataAdapter a = new SqlDataAdapter("getInfo", connection); a.SelectCommand.CommandType = CommandType.StoredProcedure; a.SelectCommand.Parameters.Add("@Count", SqlDbType.Int).Value = id_param; DataSet s = new DataSet(); a.Fill(s); foreach (DataRow dr in s.Tables[0].Rows) { Console.WriteLine(dr[0].ToString()); }[/CODE] When I seperately run the stored procedure getInfo with 2 as parameter, I get the outputBut when I run thsi program, it runs successfully but gives no output Can someone please help me?
View 1 Replies
View Related
Feb 3, 2008
I have a stored procedure that inserts a new record, and returns the ID value for the newly inserted record. The procedure works fine, but I'm unable to get that return value in my code. Here's what I have:
IF OBJECT_ID ( 'dbo.dbEvent', 'P') IS NOT NULL
DROP PROCEDURE dbEvent
GO
CREATE PROCEDURE
@Name varchar(200)
,@Location varchar(200)
AS
INSERT INTO Event
(
NAME
, LOCATION
)
VALUES
(
NAME
, @LOCATION
)
SELECT SCOPE_IDENTITY()
And my code behind: public Int64 Insert(SqlConnection Conn)
{
try
{
using (SqlCommand Command = new SqlCommand("dbo.dbEvent", Conn))
{
Command.CommandType = CommandType.StoredProcedure;
Command.Parameters.Add("@ID", ID).Direction = ParameterDirection.Output;
Command.Parameters.Add("@NAME", SqlDbType.VarChar, 200).Value = PermitName;
Command.Parameters.Add("@LOCATION", SqlDbType.VarChar, 200).Value = Location;
if (Conn.State != ConnectionState.Open) Conn.Open();
Command.ExecuteNonQuery();
Int64 _requestId = Convert.ToInt64(Command.Parameters.Add("@ID", SqlDbType.BigInt).Value.ToString());
return _requestId;
}
I'm getting the error that I have "Too many arguments specified" in my Insert() method. When I test the procedure in Query Analyzer, it works fine and returns the correct value.
Any suggestions? Don't I need to declare that return value in my .NET code as an output parameter?
View 2 Replies
View Related
Feb 11, 2008
i built a stored procedure with inserting in to customers table.
i have one column with identity.
so want to take that identity column value in the same stored procedure.
so how can i write that procedure with insert in to statements in that stored procedures.
can any one tell me.
also how to get that value in ado.net 2.0.
friends please tell me.
View 3 Replies
View Related
Aug 3, 2004
Hi
I've an existing SQL 2000 Stored Procedure that return data in many (~20) output parameters.
I'm starting to use it in a .Net c# application and it seems to insist that I setup all the output parameters:
SqlParameter param = cmd.Parameters.Add("@BackgroundColour",SqlDbType.TinyInt);
param.Direction=ParameterDirection.Output;
even if I only need the value of a single one.
Is this right? Is there a way to avoid coding every one every time?
View 3 Replies
View Related
Sep 27, 2005
Hi,Got an annoying SQL / .net error. I've created a stored procedure to take in an ID and map this to an ID table and get another ID out. So i have one ID in and one out. I get the following error:Procedure 'sp_SvrMapping' expects parameter '@rID', which was not supplied.Any idea why this happens? surely the output ID doens't need to be defined before its retrived? If so how?Thanksdrazic19p.s. code for both below.**************************************************CREATE PROCEDURE dbo.sp_SvrMapping
( @uID int, @rID int OUTPUT )
As
SELECT @rID = rID FROM tbl_mapping WHERE uID= @uIDGO**************************************************
Dim conStr As String = ConfigurationSettings.AppSettings("str_connAuth")
Dim myConn As New SqlConnection(conStr)
Dim myComm As New SqlCommand("sp_SvrMapping", myConn)
Dim test As String = "1"
myComm.CommandType = CommandType.StoredProcedure
myComm.Parameters.Add("@uID", CInt(test))
myConn.Open()
myComm.ExecuteNonQuery() <--- error called
If Not IsDBNull(myComm.Parameters("@rID").Value) Then
MappedServerAccount = myComm.Parameters("@rID").Value
End If
myConn.Close()
View 2 Replies
View Related
Dec 3, 2005
EXEC('SELECT COUNT(docid) AS Total FROM docs WHERE ' + @QueryFilter)I want to get the cound as an output parameter.I can get output parameters to work only when I dont use EXEC. I need to use EXEC for this case since @QueryFilter gets generated in the stored procedure based on some some other data.How can I get that count using ouput parameter?
View 2 Replies
View Related
Jul 11, 2001
Hi.
I'm using stored procedures in SQL7 to return a list of items to a website where they are presented. A new requirement is to present these items in a random order on the website. I have two approaches to this one, either making the result from SQL7 random or presenting the ordered results randomly. Since the presentation logic is used several times (different country subsites), it would be the easiest way to get a randomized result from the stored procedure, which would mean that I only have to change the procedure.
Any thoughts on how to accomplish this, that is returning a list of items but in random order, so that the presentation sequence would be different for each access to the website ??
Any help would be appreciated : )
Thanks!
Eirik Kjølsrud
Systems Developer, Apropos Internett - Norway
View 1 Replies
View Related
Aug 21, 2001
Hello everyone,
I am working through a tutorial and have stumbled into something that does not quite make sense to me. I was wondering if someone could help me understand this.
I have created this SP, this all makes sense to me due to the assignment of the artistname column value to the @artistname variable. In other words what is on the right of the equal sign is assigned to what is on the left.
create procedure ShowPopStyle
@style varchar(30),
@artistname varchar(30) output
as
select @artistname = artistname
from artists
where style = @style
go
Now when you execute this SP, what does not makes sense to me is if I need to declare a variable to hold the output, which I presume is null, shouldn't the @returnname be on the left side of the equal sign instead of the right?
declare @returnname varchar(30) -- variable for the output from the procedure
exec showpopstyle 'Pop', @artistname = @returnname output
print @returnname
Thanks
Kevin
View 2 Replies
View Related
Sep 2, 2000
Hi
I should validate a USER and if the user is not a valid user it should
return a message to the front end application for this I have a procedure
like this .
Basically I need to pass an output parameter to the front end application
returned by this procedure.
Create procedure test
@userid VARCHAR(20)
AS
Declare c1 cursor AS
Select userid from USERS_TBL
Open Cursor C1
FETCH NEXT from C1 INTO @Temp
While @fetch_status = 0
BEGIN
If @Temp <> @Userid
-- IF the USER is not a valid USER ...It should not execute
the Futher code(statement) it should exit the procedure
by returning the error statement.
---
---
---
FETCH NEXT from C1 INTO @Temp
END
Thanks
VENU
View 1 Replies
View Related
Dec 3, 2004
can we use output parameter with insert query in stored procedure. suppose we insert a record and we want to get the id column of this record which is identity column. we want to get this value in output parameter.
ie insert record and get its id column value in output parameter.
any one knows the way?
View 1 Replies
View Related
Mar 7, 2004
I have a stored procedure (named Insert_SRegister) that calls another
stored procedure (named: Generate_Student_Code) and a value should be returned from the second to the first one.
The program goes like this:
The first stored procedure inserts info of students and every student should have his own id which is gentratead by the second stored
procedure.
The second sp which generates the id does its job well and the first sp which inserts the info does its job well too, the Problem occurs when the genrated ID is to retrurn from the second sp to the first. I do no not know why it refuses to be transmitted in a correct way it gives no error but the id inserted in the db is always zero and I am sure that the id is generated in correct way, the problem occurs only in the transmission;
The code of the first procedur is :
Create Procedure dbo.Insert_SRegister
@YGroup VarChar (3),
@YDate VarChar (4),
@YTerm Char(1),
@SName VarChar(30),
@SSecondName VarChar(30),
@SFirstName VarChar(30),
@SGender TinyInt,
@SBDate DateTime,
@SBPlace VarChar(50),
@SOCountry VarChar(50),
@SOPassCount VarChar(50),
@PassNo VarChar(50),
@SOLang VarChar(50),
@MOLang VarChar(50),
@MName VarChar(50),
@MHAdd VarChar(50),
@MHT1 VarChar(20),
@MHT2 VarChar(20),
@MHT3 VarChar(20),
@MHMob VarChar(20),
@MWAdd VarChar(50),
@MWT1 VarChar(20),
@MWT2 VarChar(20),
@MExt VarChar(10),
@MWMob VarChar(20),
@FName VarChar(50),
@FHAdd VarChar(50),
@FHT1 VarChar(20),
@FHT2 VarChar(20),
@FHT3 VarChar(20),
@FHMob VarChar(20),
@FWAdd VarChar(50),
@FWT1 VarChar(20),
@FWT2 VarChar(20),
@FExt VarChar(10),
@FWMob VarChar(20),
@EAdd VarChar(50),
@ETele VarChar(20),
@SchName VarChar(50),
@SAdd VarChar(50),
@FBNo Smallint,
@FSNo Smallint,
@FONo VarChar(50),
@EMedical VarChar(1000),
@FDetails VarChar(1000),
@FRDetails VarChar(1000),
@PName VarChar(50),
@StudentStatus VarChar(50) OUTPUT,
@ID VarChar (50) OUTPUT
As
Begin
Declare @Exists Int, -- Return Value
@StudentCode VarChar(50)
-----------------------------------------
-- here I call the second proc and assgin it output to variable
--@StudentCode
-----------------------------------------------------------------------------------
exec @StudentCode = dbo.Generate_Student_Code @YGroup,@YDate, @StudentCode OUTPUT
----Do work and insert info in db
End
Code of the second stored procedure is:
ALTER Procedure dbo.Generate_Student_Code
@YGroup VarChar (3),
@YDate VarChar (4),
@newID VarChar (50) OUTPUT
As
Begin
set nocount on
Declare @Exists int, -- Return Value
@Mv varchar(5),
@IdLen int
If Exists(Select SID
From SRegisteration)
Begin
select @Mv = CAST(CAST(Max(RIGHT(SID, 5))AS int) + 1 AS varchar(50)) From SRegisteration
Set @IdLen = DATALENGTH(@Mv)
Set @Mv =
case
when @IdLen = 1 then '0000' + @Mv
when @IdLen = 2 then '000' + @Mv
when @IdLen = 3 then '00' + @Mv
when @IdLen = 4 then '0' + @Mv
else @Mv
end
Set @newID = 'S' + '-' + @YGroup + '-' + @YDate + '-' + @Mv
---------Here I return the ID value
select @newID
--------------------------------------
Select @Exists = 1
End
Else
Begin
Select @Exists = 0
Set @newID = 'S' + '-' + @YGroup + '-' + @YDate + '-' + '00001'
---------Here I return the ID value
select @newID
------------------
Return @Exists
End
End
View 2 Replies
View Related
May 7, 2008
Hi,
I've a large number of stored procedures that output result sets, as part of a test script it would be useful for me to be able to save the results from these stored procedures into temporary tables, without having to pre-create these tables, i.e. use the equivalent of a select * into statement.
Is this possible ?
Sean
View 2 Replies
View Related
Feb 24, 2006
I am calling a procedure with two input parameters and one output parameter (third) in the following format. I'm receiving a database error on the return parameter. *result. What is the correct syntax for an output parameter.
Code:
CSTRING strSQL;
strSQL.Format("BEGIN EQUIPMENT_UTILITIES.MOVE_EQUIPMENT('%s', '%s', '%d'); END;",(LPCSTR)lpEQNum,(LPCSTR)lpMoveTo, result); <-Failing
at '%d' result.
Thanks.
View 1 Replies
View Related
Jun 8, 2006
I am new to SQL server - Would appreciate any help.
I have a stored procedure (A) that creates a temp table with a single field of varchar(1000).
I populate this table with string data and with contents of another table obtained via the use of a cursor.
In a nutshell I am creating an XML document representation where each line of the temp table is a line of the xml document.
At the end of the stored procedure I select all of the fields from the temp table.
I have another stored procedure (B) that uses xp_sendemail and uses stored procedure (A) as the query for the attachment.
The problem is that the attachment appears to contain all unicode characters and will not open in windows explorer. It will open in XML SPY and other XML editors.
If I look at the data in a simple editor such as editplus, I see that each chracter is followed by a null character which is why I am assuming it is unicode.
Any idea how to get the select output / email attachment to exclude these null characters?
View 2 Replies
View Related
Mar 23, 2007
Hi,
I hope someone can help.
I've written a stored procedure that returns a value via an output parameter.
I'm calling the stored procedure in an sql session is a loop, and it passes the value back correctly the first time, but all subsequent calls the output parameter appears to have the same value. I believe that I'm making some very basic mistake, but I can't work it out.
Here's how I'm calling the stored procedure several times
begin
declare @instrumentid int
exec GetInstrumentId 'OFX,AUDCHF,p,1,2007-03-20 16:54:21.843,2007-06-20,100.1', @instrumentid output;
select @instrumentid
exec GetInstrumentId 'OFX,AUDUSD,c,2,2007-03-20 16:54:21.843,2007-06-20,100.2', @instrumentid output;
select @instrumentid
exec GetInstrumentId 'OFX,AUDCHF,p,3,2007-03-20 16:54:21.843,2007-06-20,100.3', @instrumentid output;
select @instrumentid
end
And this is the start of the stored procedure
Create PROCEDURE [dbo].[GetInstrumentId]
(@Ticket varchar(250), @InstrumentId int output)
AS
If I call the stored procedure once it gives the corect output, if I call it several times the output parameter (@instrumentid ) never changes.
Sean
View 3 Replies
View Related
Jul 20, 2005
Hi allIve got a problem I was hoping someone may be able to help with.Im calling an extended stored procedure provided by a third party(master..xp_OrderHeader).This xp requires 3 inputs and is supposed to provie one output.When I call it in SQL Query Analyser all runs OK and I get a column result(single result) titled "Output_Info" with a value of say 300051Here is an example callexecute master..xp_OrderHeader @CustID, @TodayDate, @OrderID,@Output_Info OUTPUTI would have thought that my variable @Output_Info would hold the output,but all I get is NULL?Any ideas what Im doing wrong. Seems bizarre that the XP Ive been providedis displaying a result (be it a coumn I haven't named) ... but I can get itinto my variable for use.CheersCraig
View 1 Replies
View Related
Jul 20, 2005
Can someone post a working stored procedure with output variable thatworks on northwind db or explain to me what I am missing. I've triedever tying but it always returns @outvariable parameter not supplied.I've read everything but must be missing something. Here is an sampleSP that I can't get to work._____________________________________CREATE PROCEDURE SampleProcedure@out smallint OUTPUTASSelect @out = count(*) from titlesGO_____________________________________This errors and returns-Server: Msg 201, Level 16, State 4, Procedure SampleProcedure, Line 0Procedure 'SampleProcedure' expects parameter '@out', which was notsupplied.What am I missing with this?Frustrated,Jeff
View 2 Replies
View Related
