Why couldn't they make SQL syntax error mistakes a little less vague.
Anyway, I was wondering, is it possible to use a set in your case statement?
CASE
(
select distinct tbhtg.TrainingBlockHistoryTypeGroupingCd
from tblTrainingBlockHistory tbh
inner join tblTrainingBlockHistoryType tbht on tbh.TrainingBlockHistoryTypeCd = tbht.TrainingBlockHistoryTypeCd
inner join tblTrainingBlockHistoryTypeGrouping tbhtg on tbht.TrainingBlockHistoryTypeGroupingCd = tbhtg.TrainingBlockHistoryTypeGroupingCd
where (select dbo.fnTrainingBlockStatus( 1234, getdate())) = tbht.TrainingBlockHistoryTypeCd
)
WHEN 'S' then (COUNT(DISTINCT TRD.TrainingBlockHistoryId) = COUNT(DISTINCT SWT.TrainingBlockHistoryId)) end
This is giving me an error on the WHEN statement. The error is "Incorrect syntax near '='" Have no idea how to fix this.
But the select statement seems to work, and as far as I can tell, that is how you write a CASE statement.
Also, this CASE statement is inside the HAVING clause - is that going to be a problem?
I have a select statement and I would like to know which when clause(1st set of whens) was fired and the value of the then for further use in my query. I am wondering if this is possibly, and how it would be done. If i try and set a @variable at the beginning of the case statament i get an error, here is my query SELECT PIE.productID, PIE.quantity, CEILING((PIE.width/12.0)/0.5)*.5 as width, CEILING((PIE.length/12.0)/0.5)*.5 as length, ***throws an error**** @sqft = CASE --- but the then clause of this CASE is the value i want for later use in this same query WHEN CEILING((PIE.width/12.0)/0.5)*.5 > (2.0 * (CEILING((PIE.length/12.0)/0.5)*.5)) THEN CEILING((((CEILING((PIE.width/12.0)/0.5)*.5) * 1.5) * CEILING((PIE.length/12.0)/0.5)*.5)/1.0)*1.0 WHEN CEILING((PIE.length/12.0)/0.5)*.5 > (2.0 * (CEILING((PIE.width/12.0)/0.5)*.5)) THEN CEILING((((CEILING((PIE.length/12.0)/0.5)*.5) * 1.5) * CEILING((PIE.width/12.0)/0.5)*.5)/1.0)*1.0 ELSE CEILING((CEILING((PIE.length/12.0)/0.5)*.5) * (CEILING((PIE.width/12.0)/0.5)*.5)/1.0)*1.0 END AS sqft, CASE WHEN @custMarkup = 1 THEN (SELECT PML1 FROM ProductMarkup PM WHERE PIE.productID = PM.productID) WHEN @custMarkup = 2 THEN (SELECT PML2 FROM ProductMarkup PM WHERE PIE.productID = PM.productID) WHEN @custMarkup = 3 THEN (SELECT PML3 FROM ProductMarkup PM WHERE PIE.productID = PM.productID) WHEN @custMarkup = 4 THEN (SELECT PML4 FROM ProductMarkup PM WHERE PIE.productID = PM.productID) WHEN @custMarkup = 5 THEN (SELECT PML5 FROM ProductMarkup PM WHERE PIE.productID = PM.productID) END AS markup FROM ProductsInEstimate PIE WHERE estID = @estid
I need to pull one field from one table and one field from another table that is i need to pull 'eGroupName' field from 'Exception' Table and 'eGroup Description' field from 'eGroup' Table but there is no connection between these two tables means there is no forign key relationship between these two tables but i need to pull both fields . If i use INNER JOIN i need to mention relationship between both tables right? so how to write query for this , and one more thing is i need to add an extra column as "Location"which is not there in either of tables for that i need to use CASE Statement as if DataSource = 1 then "ABC" else "BCD" . pls help me out in writing SQL Statement??? is this correct ?? its showing me errors Select Exception.eGroupName, eGroup.eGroupDescription from Exception Inner Join eGroup ON ??? (case when 'DataSource =1' then 'ABC' then 'BCD' endcase) Where ..... Pls correct me Thanks
I am using a CASE statement within a SELECT query to sum up values for different customers.
SELECT CR_CUST.Customer_Code, 'General_01' = CASE WHEN CR_PROD.Part_Class_Code = '01' THEN SUM(CR_INVOICE.Line_Value) ELSE 0 END, 'General_07' = CASE WHEN CR_PROD.Part_Class_Code = '07' THEN SUM(CR_INVOICE.Line_Value) ELSE 0 END, 'General_08' = CASE WHEN CR_PROD.Part_Class_Code = '08' THEN SUM(CR_INVOICE.Line_Value) ELSE 0 END FROM CR_CUST INNER JOIN CR_INVOICE ON CR_CUST.Customer_Code = CR_INVOICE.Customer_Code INNER JOIN CR_PROD ON CR_INVOICE.Product_Code = CR_PROD.Product_Code WHERE (CR_PROD.Part_Class_Code = 1 OR CR_PROD.Part_Class_Code = 7 OR CR_PROD.Part_Class_Code = 8) GROUP BY CR_CUST.Customer_Code, CR_PROD.Part_Class_Code
My question is this - is it possible to expand my SQL Query into a Sub Query so that each customers data appears on the same line of the results?, like so...
I can achieve this by writing my results into a temporary table and extracting the data with the following SQL Query, but I just thought it would be really cool if I could do it in one SQL Statement without using a temporary table.
SELECT Customer_Code, SUM(General_01), SUM(General_07), SUM(General_08) FROM #MyTempTable GROUP BY Customer_Code
I have the following query, that returns the proper count value I am looking for. I would like to modify it a little bit, but can't remember exactly how to do it.
select count(messageFromID) FROM tblMessage WHERE messageFromID = 1000) as OutBoundMessages
Basically now, it returns the "OutBoundMessages" column
I would like it to return "OutboundMessages_unChecked" and "OutboundMessages_checked" as well as "OutboundMessages_total" (I guess I could determine this value by adding the two values in the front end too. I definatley dont want to do a lookup to determine the total )
I determine if the column is "checked" or "unChecked" by a column in tblMessage
Can i use a CASE statement in a prediction query. the following query is throwing me an error
SELECT CASE [Sales Forecast Time Series].[City Code] when 'LA' then 'Los Angeles' WHEN 'CA' THEN 'California' ELSE 'OTHERS' END, PredictTimeSeries([Sales Forecast Time Series].[Sales Value],5) From [Sales Forecast Time Series]
ERROR: Parser: The statement dialect could not be resolved due to ambiguity.
Also
Is it possible to discretize the Sales Value column using a the CASE statement, the output column of PredictTimeSeries function.
Is there a link that can give me a comprehensive info on what can be achieved and what cant be using DMX queries
I was asked to add an additional column to an existing query. I'm using Microsoft Query with a MS SQL 2000 server, and don't have much knowledge of SQL in general. Here's the existing query:
SELECT A.COMPANYCODE, A.INVOICENUMBER, A.LINENUMBER, A.SONUMBER, A.CUSTOMERCODE, A.SHIPPERNUMBER, A.INVOICEDATE, A.ITEMCODE, A.QUANTITYINVOICED, A.UNITPRICE AS 'InvPrice', A.QUANTITYINVOICED * A.UNITPRICE AS 'ExtInvPrice', INVENTORY.UNITPRICE AS 'StdPrice', INVENTORY.STANDARDCOST, A.QUANTITYINVOICED * INVENTORY.STANDARDCOST AS 'ExtCost', (A.QUANTITYINVOICED * A.UNITPRICE) - (A.QUANTITYINVOICED * INVENTORY.STANDARDCOST) AS 'GM$', (INVENTORY.UNITPRICE - A.UNITPRICE) * -1 AS 'PriceListDiff' FROM ABW.DBO.SALESANALYSISHISTORY A, ABW.DBO.INVENTORY INVENTORY WHERE INVENTORY.COMPANYCODE = A.COMPANYCODE AND INVENTORY.ITEMCODE = A.ITEMCODE AND ((A.COMPANYCODE = 'csp') AND (A.QUANTITYINVOICED <>$ 0) AND (A.INVOICEDATE BETWEEN '03/1/08' AND '03/31/08')) ORDER BY A.INVOICEDATE, A.ITEMCODE
They want a column added to the current query where if A.Unitprice is greater than or equal to Inventory.UnitPrice then populate the column with A.QuantityInvoiced*A.UnitPrice. I posted on another forum, and the advice I got was to add this:
SELECT NewColumn = CASE WHEN A.Unitprice >= Inventory.UnitPrice THEN A.QuantityInvoiced * A.Unitprice ELSE 'null' END, FROM ABW.DBO.SALESANALYSISHISTORY A, ABW.DBO.INVENTORY INVENTORY
I'm not sure how to integrate it to the current query, so I've tried running it by itself, and I get the error: Didn't expect 'A' after the SELECT column list.
Any help would be greatly appreciated to modify the current query to display the new column.
In SS 2000 I want to create a sproc that returns the correct address block for a contact. I want to concatenate AddressLine1 and AddressLine2 if AddressLine2 has a value. When I run the following query I get an error (below):
SELECT vwICPContacts.PersonID, vwPersons.PreferredAddress, vwPersons.Email1,vwPersons.email2, vwPersons.email3, CASE WHEN vwPersons.preferredAddress='Home Address' then case when (isnull([vwpersons].[HomeAddressLine2],'') = '') then [vwPersons].[HomeAddressLine1] when (isnull([vwpersons].[HomeAddressLine2],'') <> '') then [vwPersons].[HomeAddressLine1] + Char(13) & Char(10) & [vwPersons].[HomeAddressLine2] END ELSE case when (isnull([vwpersons].[AddressLine2],'') = '') then [vwPersons].[AddressLine1] when (isnull([vwpersons].[AddressLine2],'') <> '') then [vwPersons].[AddressLine1] + Char(13) & Char(10) & [vwPersons].[AddressLine2] END END AS MailingAddress FROM (vwPersons INNER JOIN vwICPContacts ON vwPersons.ID = vwICPContacts.PersonID) LEFT JOIN vwCompanies ON vwPersons.CompanyID = vwCompanies.ID
Error Message: Server: Msg 403, Level 16, State 1, Line 1 Invalid operator for data type. Operator equals boolean AND, type equals nvarchar.
I've done this before but am completely stumped. Any ideas?
table A: | ID | FRUIT | VEGETABLE | GOOD | -------------------------------------------- | 1 | orange | cabbage | no | | 1 | apple | lettuce | yes | | 1 | kiwi | broccoli | no | | 1 | pear | kale | yes |
table B: | ID | FRUIT | VEGETABLE | ------------------------------- | 1 | apple | lettuce | | 2 | pear | kale |
If the fruit and vegetable in table A is found in table B, then set the GOOD column = yes, else no.
This is what I have so far.
update tableA set GOOD = (case when tableA.id = C.id then 'yes' else 'no' end ) from (select tableA.id as id from tableA A left join tableB B on B.fruit = A.fruit and B.vegetable = A.vegetable) C
How I am using a CASE statement within a WHERE clause to filter data:
CREATE PROCEDURE dbo.GetSomeStuff @filter1 varchar(100) = '', @filter2 varchar(100) = '' AS BEGIN SELECT
[Code] .
What I want, is to be able to pass in a single value to filter the table, or if I pass in (at the moment a blank) for no filter to be applied to the table.
Is this a good way to accomplish that, or is there a better way? Also, down the line I'm probably going to want to have multiple filter items for a single filter, what would be the best way to implement that?
I have a a Group By query which is working fine aggregating records by city. Now I have a requirement to focus on one city and then group the other cities to 'Other'. Here is the query which works:
Select [City]= CASE WHEN [City] = 'St. Louis' THEN 'St. Louis' ELSE 'Other Missouri City' END, SUM([Cars]) AS 'Total Cars' From [Output-MarketAnalysis] Where [City] IN ('St. Louis','Kansas City','Columbia', 'Jefferson City','Joplin') AND [Status] = 'Active' Group by [City]
Here is the result:
St. Louis 1000 Kansas City 800 Columbia 700 Jefferson City 650 Joplin 300
When I add this Case When statement to roll up the city information it changes the name of the city to 'Other Missouri City' however it does not aggregate all Cities with the value 'Other Missouri City':
Select [City]= CASE WHEN [City] = 'St. Louis' THEN 'St. Louis' ELSE 'Other Missouri City' END, SUM([Cars]) AS 'Total Cars' From [Output-MarketAnalysis] Where [City] IN ('St. Louis','Kansas City','Columbia', 'Jefferson City','Joplin') AND [Status] = 'Active' Group by [City]
Here is the result:
St. Louis 1000 Other Missouri City 800 Other Missouri City 700 Other Missouri City 650 Other Missouri City 300
I have a view where I'm using a series of conditions within a CASE statement to determine a numeric shipment status for a given row. In addition, I need to bring back the corresponding status text for that shipment status code.
Previously, I had been duplicating the CASE logic for both columns, like so:
Code Block...beginning of SQL view... shipment_status = CASE [logic for condition 1] THEN 1 WHEN [logic for condition 2] THEN 2 WHEN [logic for condition 3] THEN 3 WHEN [logic for condition 4] THEN 4 ELSE 0 END, shipment_status_text = CASE [logic for condition 1] THEN 'Condition 1 text' WHEN [logic for condition 2] THEN 'Condition 2 text' WHEN [logic for condition 3] THEN 'Condition 3 text' WHEN [logic for condition 4] THEN 'Condition 4 text' ELSE 'Error' END, ...remainder of SQL view...
This works, but the logic for each of the case conditions is rather long. I'd like to move away from this for easier code management, plus I imagine that this isn't the best performance-wise.
This is what I'd like to do:
Code Block ...beginning of SQL view... shipment_status = CASE [logic for condition 1] THEN 1 WHEN [logic for condition 2] THEN 2 WHEN [logic for condition 3] THEN 3 WHEN [logic for condition 4] THEN 4 ELSE 0 END,
shipment_status_text =
CASE shipment_status
WHEN 1 THEN 'Condition 1 text'
WHEN 2 THEN 'Condition 2 text'
WHEN 3 THEN 'Condition 3 text'
WHEN 4 THEN 'Condition 4 text'
ELSE 'Error'
END, ...remainder of SQL view...
This runs as a query, however all of the rows now should "Error" as the value for shipment_status_text.
Is what I'm trying to do even currently possible in T-SQL? If not, do you have any other suggestions for how I can accomplish the same result?
i was tasked to created an UPDATE statement for 6 tables , i would like to update 4 columns within the 6 tables , they all contains the same column names. the table gets its information from the source table, however the data that is transferd to the 6 tables are sometimes incorrect , i need to write a UPDATE statement that will automatically correct the data. the Update statement should also contact a where clause
the columns are [No] , [Salesperson Code], [Country Code] and [Country Name]
i was thinking of doing
Update [tablename] SET [No] = CASE WHEN [No] ='AF01' THEN 'Country Code' = 'ZA7' AND 'Country Name' = 'South Africa' ELSE 'Null' END
Hello friends, I want to use select statement in a CASE inside procedure. can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID, CASE E.EmployeeType WHEN 1 THEN select * from Tbl1 WHEN 2 THEN select * from Tbl2 WHEN 3 THEN select * from Tbl3 END FROM EMPLOYEE E
can any one help me in this? please give me a sample query.
Hi All, I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance. My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.
Here is my code: Insert into myTblA (TblA_ID, mycasefield = case when mycasefield = 1 then 99861 when mycasefield = 2 then 99862 when mycasefield = 3 then 99863 when mycasefield = 4 then 99864 when mycasefield = 5 then 99865 when mycasefield = 6 then 99866 when mycasefield = 7 then 99867 when mycasefield = 8 then 99868 when mycasefield = 9 then 99855 when mycasefield = 10 then 99839 end, alt_min, alt_max, longitude, latitude ( Select MTB.LocationID MTB.model_ID MTB.elevation, --alt min null, --alt max MTB.longitude, --longitude MTB.latitude --latitude from MyTblB MTB );
The error I'm getting is: Incorrect syntax near '='.
I have tried various versions of the case statement based on examples I have found but nothing works. I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.
material ========= material_id project_type project_id qty 1 AB Corporate 1 3 2 Other Project 2 7
i have taken AB Corporate for AB_Corporate_project ,Other Project for Other_project
sample query i write :--
select m.material_id ,m.project_type,m.project_id,m.qty,ab.ab_crp_id, ab.custname ,op.other_proj_id,op.other_custname,op. po case if m.project_type = 'AB Corporate' then select * from AB_Corporate_project where ab.ab_crp_id = m.project_id else if m.project_type = 'Other Project' then select * from Other_project where op.other_proj_id=m.project_id end from material m,AB_Corporate_project ab,Other_project op
but this query not work,also it gives errors
i want sql query to show data as follows
material_id project_type project_id custname other_custname qty 1 AB Corporate 1 abc -- 3 2 Other Project 2 -- dsd 7
so plz help me how can i write sql query for to show the output plz send a sql query
I am working in a SQL server database that is configured to be case-insensetive but I would like to override that for a specific query. How can I make my query case-sensitive with respect to comparison operations?
I am trying to use a case statement in one of my stored proc but I am stuck a little bit.Here is a example, something like:declare @id int set @id =1case @id When 1 then select * from contactsend case but this keeps on giving me error: Incorrect syntax near the keyword 'case'. Any help is appreciated!
Hi I have some question regarding the sql case statment.Can i use the case statement with the where clause.Example: SELECT FirstName, IDFROM myTablewhere case when ID= '123' then id = '123' and id='124' endorder by idBut the above code does not work.
Hi all, I was wondering if there is any way in an sql statement to check whether the data your trying to get out of the DB is of a particular type, ie. Int, char etc. I was thinking about a case statement such as <code> CASE WHEN (MyNum <> INT) then 0 end AS MyNum </code>
This has to be included in the sql statement cause I need this field to get other data. Any thoughts on how to achieve this would be greatly appreciated.
If I’m in the wrong thread section please advise of best one to get help in.
Hi !!!i hope one of the sql specialists answer me about the best and most effeceint way to acheive what i am looking for Scenario:-------------i have a 3 tables related to each other Addresses, Groups and GroupAddressthe relation is for both addresses and groups is one to many in the GroupAddress.the behaviour in the application : user can add addresses to his address list and from the address list a user can add an address to many groups like if you have Group name "Freinds" and you add me in it and you have Football team group and you add me to it like that !!!not i have another function called "copy group"in the GroupAddress i have this data as example GroupID AddressID1 41 61 21 441 72 82 62 93 133 73 10and the group ID called "Freinds"i want to copy the group so i can have another group that has the same addresses by one click rather than collectiong them again one by one ...by the way the new copy will have a new group name ( as this is thebusiness logic so user can not have dupicate group name )so what is the best SQL statement that i need to copy the group ???i hope that clear enough!
I am trying determine if I can do something like the code below. I have done a left join on a table. In the select statement there are three possible values. Yes, No, or NULL. I could like to use a Case statement to determine if there is Null. If so, then output N/A in place of the Null. So then my possible valus are Yes, No, and N/A.
Any clues?
Thanks, John
SELECT TOP 100 OfferDressRoomYN.yesno as OfferDressRoom = CASE WHEN offerDressRoomYN.yesno IS NULL THEN 'N/A' END, FROM dataquestionnaire dq LEFT OUTER JOIN yesno OfferDressRoomYN ON dq.c3_1 = OfferDressRoomYN.yesnoid
In my query below i have the results ,The thing to observe in the result set it for the name "Acevedo" , "Abeyta" its not doing a group by and populating the results in the following column.Rather its addind a new row and adding it as 1 in the next row. I have to populate the counts in one row for common names.Shall i use a if condition within a case block.If yes how?any other work arounds would be appriciated. Please help Thanks
select isnull(replace(Ltrim(Rtrim(P.Lastname)),',',''),'' ) Lastname , case ProductID WHEN 22 then count(S.Product) Else 0 END AS Builders , case ProductID WHEN 23 then count(S.Product) Else 0 END AS Associates , case ProductID WHEN 24 then count(S.Product) Else 0 END AS Affiliates FROM vwpersons p with (nolock) join vwSubscriptions S with (nolock) on S.RecipientID = P.ID where P.Lastname in (select Ltrim(Rtrim(H.name)) from externaldata.dbo.Hispanicnames H) group by P.Lastname, S.ProductID having count(P.LastName)>=1 order by 1
I am trying to get avg score by site, by call type. Columns are Site(varchar), Calltype(varchar), totalscore(float). Calltypes are A, B, C, D. Sites are 1, 2, 3, 4. I can do a straight average statement and only get one calltype. I want to do a CASE statement to get all average scores for all calltypes.
Select Site, avg(totalscore) as [Avg Score] FROM DB WHERE calltype = 'A' GROUP BY Site
Results
Site Avg Score (for A) 1 85 2 75.5 3 85.33
SELECT Site, AVG(CASE WHEN TotalScore > 0 AND CallType = 'A' THEN Totalscore ELSE 0 END) AS [Avg Score For A] FROM DB GROUP BY Site
Results
Site Avg Score For A 1 i get 8.5 2 i get 37.75 3 i get 36.57 Why am I getting a difference? Any help is greatly appreciated - thank you
Hi Ive got a simple query where I want to calculate an average of one number divided by the other ie: avg(x / y)
Im trying to use a case statement to return 0 in the event that y is 0, to avoid a division by zero error. My query is still returning a division by zero error anyway can anybody help?
SELECT CCode, CASE WHEN BS_TOTAL_ASSETS = 0 THEN 0 ELSE AVG(BSCLTradeCreditors / BS_TOTAL_ASSETS) END AS myaverage FROM [Company/Year] GROUP BY CCode, BS_TOTAL_ASSETS
i ahve one fucniton: create function fntotalcountcustclas
( @campaign varchar(50), @startdate datetime, @enddate datetime) RETURNS TABLE AS RETURN ( Select t.itemnmbr,t.custclas, t.custclasdescription, t.totalcustclas as totalcount
from ( select vi.itemnmbr, replace(vc.custclas,'','Unspecified') as custclas, vc.custclasdescription, count(vc.custclas) as totalcustclas from vwcustnmbr vc join vwitemnbmr vi on vi.sopnumbe=vc.sopnumbe Where vi.Campaign = @Campaign and (vc.docdate between @startdate and @enddate)
group by vi.itemnmbr,vc.custclas, vc.custclasdescription ) as t ) when i m executing it: select * from fntotalcountcustclas('copd','1/1/2008','4/11/2008') order by totalcount desc
i m getting results like: itemnmbr,custclas,custclasdescription,totalcount ------------------------------------------------ 06-5841 STANDARD Standard(web) 31 06-5840 STANDARD Standard(web) 30 kr-014 STANDARD Standard(web) 72 06-5841 INDPATIENT Patient 12 06-5840 INDPATIENT Patient 9 06-5845 INDPATIENT Patient 6 06-5841 PROGRAM Program 6 06-5841 INST-HOSPITAL Hospital 11 ...................
Basically, i ahve to use one condition to get corrrect output related to inputs:
like - i have to input @category varchar(50), @category_value varchar(50) and if category = 'campaign' then category_value = '' then output should be itemnmbr sum(totalcount) [whatever should be custclas or custclasdesscription] itemnmbr sumcount ----------------- 06-5840 52 06-541 101 06-452 26 kr-045 252
and if categroy = 'item' then category_value = any itemnmbrs(06-5840,06-5845,06-5841 etc..) then output should be itemnmbr custclas custclasdescription totalcount ----------------------------------------------------- 06-5840 STANDARD Standard(web) 31 06-5840 INDPATIENT Patient 9 06-5840 PROGRAM Program 6 06-5840 INS-HOSPITAL Hospital 17
like that..
can anyone help me to write case statement. thanks a lot!!
create function fntotalcountcustclas
( @campaign varchar(50), @startdate datetime, @enddate datetime, @category varchar(50), @category_value varchar(50)) RETURNS TABLE AS RETURN ( Select t.itemnmbr,t.custclas, t.custclasdescription, t.totalcustclas as totalcount, case when category
from ( select vi.itemnmbr, replace(vc.custclas,'','Unspecified') as custclas, vc.custclasdescription, count(vc.custclas) as totalcustclas from vwcustnmbr vc join vwitemnbmr vi on vi.sopnumbe=vc.sopnumbe Where vi.Campaign = @Campaign and (vc.docdate between @startdate and @enddate)
group by vi.itemnmbr,vc.custclas, vc.custclasdescription ) as t )
Im running the following sql statement but I dont see the expected output. There are few differences between acc & cl1, mcc & cl2 , ncr & cl3 but I dont see either 'ONE' or 'TWO' or 'THREE'. There is even a case where cl3 is null but the sql is not filling in either one or two or three. Query simply returns id & rest as null values.
SELECT P1.id, CASE WHEN p1.acc!= p1.cl1 then 'ONE' WHEN p1.mcc!= p1.cl2 then 'TWO' when p1.ncr!= p1.cl3 then 'THREE' Else NULL END As NOnMatchingColumn from (select id, acc, cl1,mcc,cl2,ncr,cl3 from dbo.ml)P1
I'm not sure if I am doing this the right way. In my table I have project ids. Each project id has several activities associated with it. Each project has a starting balance. Each activity posts an expense to the total balance of the project. If the project has enough money to handle the charges made by the activities, all the activity expenses can be "posted". If there isn't enough money, I want to loop through the activities, check to see if there is enough of a balance to "post" the first one, If there is, then I want to re-adjust the balance and check the second activity. I want to scroll through each project/activity to see what can be "posted". Here is what I have so far, but I cannot work out how to change the total balance amount. Hopefully what I am trying to do makes sense!
declare @testId nchar(6) declare @RowNum int declare @newBalance int select top 1 @testId=projID from #ProjIds set @RowNum = 0
WHILE @RowNum <= (Select Max(temp_id) from #ProjIds) BEGIN set @RowNum = @RowNum + 1 set @newBalance = (select top 1 Bal_2300 from #RevRecData where @testId=projId order by projID, activity)
select projId, activity, postCr, Bal_2300, 'New_Status' = Case when (postCr <= Bal_2300) then 'Can Clear' else 'Still Check' END, 'New_Balance' = Case when (postCr <= @newBalance) then (@newBalance - postCr) else @newBalance End from #RevRecData where @testId=projId order by projID, activity
select top 1 @testId=projId from #ProjIds where projId > @testID END