I have two table with some identical fields and I am trying to populate one of the tables with a row that has been selected from the other table.
Is there some standard code that I can use to take the selected row and input the data into the appropriate fields in the other table?
I want to update records in 1 table with the result of a select statement.
The table is called 'MPR_Portfolio_Transactions' and contains the following fields:
[PTR_SEQUENCE]
,[PTR_DATE]
,[PTR_SYMBOL]
,[PTR_QUANTITY]
,[PTR_ACUM]
And the select statement is like this:
SELECT SUM(PTR_QUANTITY) OVER (PARTITION BY PTR_SYMBOL ORDER BY PTR_DATE, PTR_SEQUENCE) AS 'ACUMULADO'
FROM MPR_portfolio_transactions
ORDER BY PTR_SYMBOL, PTR_DATE, PTR_SEQUENCE
This select statement generates one line per existing record. And what I would like to do next is to UPDATE the field 'PTR_ACUM' with the result of the 'ACUMULADO'
the key is PTR_SEQUENCE
I need to write a select statement that take the upper table and select the lower table.
View 3 Replies View RelatedHi all,
I want to save DBCC's result into a table to execute my statement but I don't know how to, exmple for DBCC OPENTRAN (my database) - how can I put SPID & UID to my variable from this statement?
Thanks in advance
Happy New Year
PTH
I have the select statement below - where I use some external functions - and I would like the result to be saved to another table.After executing the statement I end up with a table containing the following columns:
accountno
d.date_start
d.date_end
TWRR_Month
TWRR_Cum
Normally I would use the command 'INTO TableName' but since the statement is so long I don´t know where to place it.The select statement is as follows:
IF OBJECT_ID('tempdb..#trn') IS NOT NULL
DROP TABLE #trn
IF OBJECT_ID('tempdb..#mv') IS NOT NULL
DROP TABLE #mv
SELECT PTR_sequence as trno, PTR_CLIENTACCOUNTNUMBER as accountno, PTR_DATE as date_trn,
CASE PTR_TAC
WHEN 'BUY' THEN 0
ELSE PTR_LOCALAMT
END as amt_trn
[code]...
Till now I get data form multiple table using join, but unable to understand how can i get the this result based on given table -
Result should be -
ProCodeProductName
PRO00001;PRO00002Product Test SearchedPromotion One;Promotion Two
PRO00001;PRO00002;PRO00002Product Final SearchedPromotion One;Promotion Two;Promotion Three
PRO00002TestingPromotion Two
Tables -
select * from ProMaster
CodeName
PRO00001Promotion One
PRO00002Promotion Two
PRO00003Promotion Three
select * from ProDetail
IDProCodeProduct
1PRO00001;PRO00002Product Test Searched
2PRO00001;PRO00002;PRO00002Product Final Searched
3PRO00002Testing
Hi,
I need to create a table which has the columns from the select statement result.
I tried in this way
drop table j9a
SELECT er.* into j9a
FROM caCase c
LEFT OUTER JOIN paPatient pp ON c.caCaseID=pp.caCaseID
Left Outer JOIN paManagementSite pm ON pp.paManagementSiteID=pm.paManagementSiteID
Left Join exexposure ee ON ee.cacaseID=c.caCaseID
LEFT OUTER JOIN exExposureRoute eer ON eer.caCaseID=c.caCaseID
LEFT OUTER JOIN exRoute er ON er.exRouteID=eer.exRouteID
WHERE c.caCallTypeID =0
AND c.Startdate between '1/1/2006' and '12/1/2006'
AND (ee.exMedicalOutcomeID=4 OR ee.exMedicalOutcomeID=10)
AND pp.paSpeciesID=1
AND c.PublicID_adOrganization_secondary is null
declare @1 int,@2 int,@3 int,@4 int,@5 int,@6 int,@7 int,@8 int,
@9 int,@10 int,@11 int,@12 int,@21 int,@22 int,@23 int,@24 int,@25 int,
@26 int,@27 int,@28 int,@29 int,@30 int,@31 int,@32 int
set @21=(select count(*) from j9a whereIngestion=1)
set @22=(select count(*) from j9a whereInhalation/nasal=1)
set @23=(select count(*) from j9a whereAspiration=1)
set @24=(select count(*) from j9a whereOcular=1)
set @25=(select count(*) from j9a whereDermal=1)
set @26=(select count(*) from j9a whereBite=1)
set @27=(select count(*) from j9a whereParenteral=1)
set @28=(select count(*) from j9a whereOtic=1)
set @29=(select count(*) from j9a whereRectal=1)
set @30=(select count(*) from j9a whereVaginal=1)
set @31=(select count(*) from j9a whereOther=1)
set @32=(select count(*) from j9a whereUnknown=1)
Create table table9(Route varchar(30),Fatal int)
insert into table9 values ('Route_Ingestion',@1,@21)
insert into table9 values ('Route_Inhalation',@2,@22)
insert into table9 values ('Route_Aspiration',@3,@23)
insert into table9 values ('Route_Ocular',@4,@24)
insert into table9 values ('Route_Dermal',@5,@25)
insert into table9 values ('Route_Bite',@6,@26)
insert into table9 values ('Route_Parenteral',@7,@27)
insert into table9 values ('Route_Otic',@8,@28)
insert into table9 values ('Route_Rectal',@9,@29)
insert into table9 values ('Route_Vaginal',@10,@30)
insert into table9 values ('Route_Other',@11,@31)
insert into table9 values ('Route_Unknown',@12,@32)
select * from table9
The exRoute result is like this
70 Ingestion
71 Inhalation
72 Aspiration
73 Ocular
74 Dermal
75 Bite/sting
76 Parenteral
77 Other
78 Unknown
524 Otic
525 Rectal
526 Vaginal
The above giving the errors
Msg 207, Level 16, State 1, Line 19
Invalid column name 'Ingestion'.
Msg 207, Level 16, State 1, Line 20
Invalid column name 'Inhalation'.
Thanks in advance
I have two tables with a 1-many relationship. I want to write aselect statement that looks in the table w/many records and comparesit to the records in the primary table to see if there are any recordsthat do not match based on a certain field.Here is how my tables are setup:Task Code TableTCode,TCodeFName,ActiveTracking Table(multiple records)ID,User,ProjectCode,TCode,Hours,DateI want to look at the tracking table and see if there are any TCodelisted here that are not listed in the Task Code table.How do I write a SQL statement to do this?
View 6 Replies View RelatedHello,Is it possible to EXEC stored procedure from a query?I want to execute stored procedure for every line of SELECT resulttable.I guess it's possible with cursors, but maybe it's possible to make iteasier.Give an example, please.Thank you in advance.Hubert
View 2 Replies View RelatedSo I have been trying to get mySQL query to work for a large database that I have. I have (lets say) two tables Table_One and Table_Two. Table_One has three columns: Type, Animal and TestID and Table_Two has 2 columns Test_Name and Test_ID. Example with values is below:
**TABLE_ONE**
Type Animal TestID
-----------------------------------------
Mammal Goat 1
Fish Cod 1
Bird Chicken 1
Reptile Snake 1
Bird Crow 2
Mammal Cow 2
Bird Ostrich 3
**Table_Two**
Test_name TestID
-------------------------
Test_1 1
Test_1 1
Test_1 1
Test_1 1
Test_2 2
Test_2 2
Test_3 3
In Table_One all types come under one column and the values of all Types (Mammal, Fish, Bird, Reptile) come under another column (Animals). Table_One and Two can be linked by Test_ID
I am trying to create a table such as shown below:
Test_Name Bird Reptile Mammal Fish
-----------------------------------------------------------------
Test_1 Chicken Snake Goat Cod
Test_2 Crow Cow
Test_3 Ostrich
This should be my final table. The approach I am currently using is to make multiple instances of Table_One and using joins to form this final table. So the column Bird, Reptile, Mammal and Fish all come from a different copy of Table_one.
For e.g
Select
Test_Name AS 'Test_Name',
Table_Bird.Animal AS 'Birds',
Table_Mammal.Animal AS 'Mammal',
Table_Reptile.Animal AS 'Reptile,
Table_Fish.Animal AS 'Fish'
From Table_One
[Code] .....
The problem with this query is it only works when all entries for Birds, Mammals, Reptiles and Fish have some value. If one field is empty as for Test_Two or Test_Three, it doesn't return that record. I used Or instead of And in the WHERE clause but that didn't work as well.
Hi,
I have 2 tables,
MembersTemp and Organisations
I'm trying to extract the organisation Name from the organisations table but am unsure of the sql statement to do this.
Initiallt I only have the ExecID for the MembersTemp table
MembersType table:
ExecID 3013
OrganisationID 4550
Organisation table:
ID 4550 (PK)
Name "Microboff"
Any ideas??
I have one control table to store all related table name
Table ID TableName
1 TableA
2 TableB
In Table A:
RecordID Value
1 1
2 2
3 3
In Table B:
RecordID Value
1 1
2 2
3 3
How can I get the result by select the Table list first and then combine the data in table A and table B?
Thank you!
I have the following data
MASTER
id
name
DETAIL
id
master_id
name
I want a perform a query where i can get all the rows of the master table which have no relationed rows in detail table.
How can I do that???
I'm trying to get the <Title> node value returned in the select statement below, but cant quite get it to work. I have the <ID> node being returned in the statement, but not the title. Any help is apprecited.
param ids = '<Collection><Content><ID>1</ID><Title>Document 1</Title></Content>< Content><ID>2</ID><Title>Document 2</Title></Content></Collection>'
CREATE PROCEDURE [GetDownloads](@Ids xml) AS
DECLARE @ResearchDocuments TABLE (ID int)
INSERT INTO @ResearchDocuments (ID) SELECT ParamValues.ID.value('.','VARCHAR(20)')
FROM @Ids.nodes('/Collection/Content/ID') as ParamValues(ID)
SELECT * FROM research_downloads INNER JOIN @ResearchDocuments rd ON research_downloads.doc_id = rd.ID Where research_downloads.post_sf = 0
I'm trying to get the <Title> node value returned in the select statement below, but cant quite get it to work. I have the <ID> node being returned in the statement, but not the title. Any help is apprecited.
param ids = '<Collection><Content><ID>1</ID><Title>Document 1</Title></Content>< Content><ID>2</ID><Title>Document 2</Title></Content></Collection>'
CREATE PROCEDURE [GetDownloads](@Ids xml) AS
DECLARE @ResearchDocuments TABLE (ID int)
INSERT INTO @ResearchDocuments (ID) SELECT ParamValues.ID.value('.','VARCHAR(20)')
FROM @Ids.nodes('/Collection/Content/ID') as ParamValues(ID)
SELECT * FROM research_downloads INNER JOIN @ResearchDocuments rd ON research_downloads.doc_id = rd.ID Where research_downloads.post_sf = 0
Hi,I'm trying to dynamically assign the table name for a SELECT statement but can't get it to work. Given below is my code: SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE GetLastProjectNumber (@DeptCode varchar(20))
AS
BEGIN TRANSACTION
SET NOCOUNT ON
DECLARE @ProjectNumber int
SET @ProjectNumber = 'ProjectNumber' + REPLACE(CONVERT(char,@DeptCode),'.','')
SELECT MAX(@ProjectNumber)
FROM 'tbl_ProjectNumber' + REPLACE(CONVERT(char,@DeptCode),'.','');
END TRANSACTION Basically, I have a bunch of tables which were created dynamically using the code from this post and now I need to access the last row in a table that matches the supplied DeptCode. This is the error I get:Msg 102, Level 15, State 1, Procedure GetLastProjectNumber, Line 29Incorrect syntax near 'tbl_ProjectNumber'. Any help would be appreciated.Thanks.
I have a table that contains the following structure and information:
Code:
UID Member_Number Time_Stamp Status Reason Event Reg F_Name L_Name
18772054062/3/2005 11:48:27 AMInNonenoneNoneWendyBoud
86930082522/3/2005 12:39:35 PMInNonenoneNoneJeremyAhlman
98772054062/3/2005 12:40:20 PMOutNonenoneNoneWendyBoud
106930082522/3/2005 12:40:45 PMOutNonenoneNoneJeremyAhlman
118772054062/3/2005 12:40:50 PMInNonenoneNoneWendyBoud
128772054062/3/2005 12:46:25 PMOutNonenoneNoneWendyBoud
I need to be able to take this information and display it in a data grid so that on each row I see the Member Number, First and Last Name and the In and Out Time.
I am not sure how to group the In and Out times together so that the query knows which time out corresponds to which time time for the member?
Any help is greatly appreciated!
I would like to know if it is possible to do a SELECT statement where I can denormalize my table. I am not sure if it is needed to create a new table at first and insert denormalized values into the created table.
Example
Original table:
ID XXX VALUES
1 a 10
1 b 15
1 c 8
And I want to use SELECT to get this table:
ID a b c
1 10 15 8
Dear folks,
create table temptable(eno, ename) as select eno, ename from emp.
here the problem is it is asking for the datatype for the temporary table.
is it not possible to create the temp table without providing the datatypes?
thank you very much.
Vinod
Hi, I execute a select statement
SELECT COUNT(*) FROM TABLEA WHERE DTRECORD < '1-MARCH-2008'
every times I execute it I get different result.
1st result : 17036986
2nd result : 17037903
3rd result : 17038309
Any idea??? There is no any inserting on TABLEA, so it should not has changes. Is that because of statistic is still updating?? I don't have much knowledge on this so I cannot sure the cause of the problem. Please advise.
Hi,
I could use some help on how to save the result of my data-flow in an existing table.
I have created a data flow. I have no trouble storing the result of the flow in a new table. But I'm trying to store the result of my data flow in an existing table. (The flow involves fuzzy grouping, and i would like to store the result in the original table on which the fuzzy grouping was performed). But I cannot get it to work.
I can select the existing table as OLE DB destination. I can write an SQL to manipulate this table, but how do i address the result of the flow in the SQL?
Help is welcome here!
I'm wondering if there is a single statement I can write to pull my data. Let's say my Order table has one field for userId and one field for supervisorId (among other fields) both of which are foreign keys into the Users table where their name, address, etc. are stored. What I'd like to do is to pull all the rows from Order and have a join that pulls the user name and supervisor name from the User table all in one go. Right now I pull all the Orders with just user name joined, and then go back over the objects to add the supervisor name as a separate query.
The reason I'd like to do this is to simplify the objects I'm passing to the GridView by doing a single fetch instead of multiples. I'm using SQL Server, .NET 2.0 and VS.NET 2005.
Thanks
Hello fellow .net developers,
In a website I'm working on I need to be able to put all of the user tables in a database in a dropdownlist.
Another dropdownlist then will autopopulate itself with the names of all the columns from the table selected in the first dropdownlist.
So, what I need to know is: is there a sql statement that can return this type of information?
Example:
Table Names in Database: Customers, Suppliers
Columns in Customers Table: Name, Phone, Email, Address
I click on the word "Customers" in the first dropdownlist.
I then see the words "Name", "Phone", "Email", "Address" in the second dropdownlist.
I'm sure you all know this (but I'll say it anyways): I could hardcode this stuff in my code behind file, but that would be really annoying and if the table structure changes I would have to revise my code on the webpage. So any ideas on how to do this the right way would be really cool.
Thanks in advance,
Robert
In SQL Server you can do a SELECT INTO to create a new table, much like CREAT TABLE AS in Oracle. I'm putting together a dynamic script that will create a table with the number of columns being the dynamic part of my script. Got any suggestions that come to mind?
Example:
I need to count the number of weeks between two dates, my columns in the table need to be at least one for every week returned in my query.
I'm thinking of getting a count of the number of weeks then building my column string comma separated then do my CREATE TABLE statement rather then the SELECT INTO... But I'm not sure I'll be able to do that using a variable that holds the string of column names. I'm guess the only way I can do this is via either VBScript or VB rather then from within the database.
BTW - this would be a stored procedure...
Any suggestions would be greatly appreciated.
Project has 2 tables process(parent) and processchild(child).
Project workflow recorddsany changes to these tables as a history.
I want to find out all the process that are in status = saved(1) where processchild is at status = started(1).
Here is example.
Process table
PK, processid, status , other data
1, 1, 1,...
2, 1, 2,...
3, 2, 1,...
4, 3, 1,...
ProcessChild table
PK, processid, processchildid status, other data
1, 1, 1, 1,..
2, 1, 1, 2,..
3, 1, 2, 1,...
4, 1, 2, 2,...
5, 2, 1, 1,..
6, 2, 1, 2,...
7, 2, 2, 1,...
8, 3, 1, 1,..
I want to find out all the processes where processchildid=2 and processchild.status =1
Hi,I want to create a temporary table and store the logdetails froma.logdetail column.select a.logdetail , b.shmacnocase when b.shmacno is null thenselectcast(substring(a.logdetail,1,charindex('·',a.logde tail)-1) aschar(2)) as ShmCoy,cast(substring(a.logdetail,charindex('·',a.logdeta il)+1,charindex('·',a.logdetail,charindex('·',a.lo gdetail)+1)-(charindex('·',a.logdetail)+1))as char(10)) as ShmAcnointo ##tblabcendfrom shractivitylog aleft outer joinshrsharemaster bon a.logkey = b.shmrecidThis statement giving me syntax error. Please help me..Server: Msg 156, Level 15, State 1, Line 2Incorrect syntax near the keyword 'case'.Server: Msg 156, Level 15, State 1, Line 7Incorrect syntax near the keyword 'end'.sample data in a.logdetailBR··Light Blue Duck··Toon Town Central·Silly Street···02 Sep2003·1·SGL·SGL··01 Jan 1900·0·0·0·0·0.00······0234578······· ····· ··········UB··Aqua Duck··Toon Town Central·Punchline Place···02 Sep2003·1·SGL·SGL··01 Jan 1900·0·0·0·0·0.00·····Regards.
View 2 Replies View RelatedI am wondering if there is a direct query in this case:
I am developing a program to a company which simply sells services
One service may have different prices for different types of clients
The price of any service for any client can change at any time, and I should be able to trace these changes at any time
I made the following tables (simplified): (asterisk for primary key)
(Table) (Fields)
CLIENT_TYPES : ID*, ClientTypeName
SERVICES : ID*, ServiceName
PRICES : ServiceID*, ClientTypeID*, Price, Date*
ORDERS : ID*, Date, ClientTypeID
ORDER_SERVICES : OrderID*, ServiceID*
The field in bold is the area of the question
This is a sample data in the PRICES table:
ServiceID ClientTypeID Price Date1 1 100 1/1/20072 1 150 1/1/20071 2 90 1/1/20072 2 135 1/1/2007
Now if I want to update a price of service 1 for clienttype 1, I add the following row:
1 1 100 1/1/2008
So one product for one client can have any number of prices with different dates
The following query:
SELECT * FROM PRICES WHERE ClientTypeID = 1
will retrieve all prices with repeats for a specific client (#1 here)
What I want is a query to retrieve the most recent prices for specific client for all products, even if a query on query
If there is commemts on table design please tell me
thanks for any one who provides help
Hi,I have this code following my signature to SELECT a number.I don't know what am I missing, because it always return the number which the variable banID was initialized (32 in this case).The strangest thing is that if I run the statement inside MS SQL SERVER, I get the right result.Any help would be appreciated.Warm Regards,Mário Gamito--// Get inserted user IDint banID = 32 ;SqlConnection myConn = new SqlConnection("Data Source=192.168.1.6; Initial Catalog=db1; User=sa; Password=secret");try{myConn.Open()}catch (Exception e){Console.WriteLine(e.ToString());}try{SqlCommand myCommand = new SqlCommand("SELECT MAX(PublisherID) FROM table1", myConn);banID = Convert.ToInt32(myCommand.ExecuteScalar);}catch (Exception e){ Console.WriteLine(e.ToString());}Response.Write(banID);
View 3 Replies View RelatedI want to export the data from a database and place it on a csv file to be imported to another database. However, I want some columns from the selected data (result of select statement) to be encrypted. What should I do? Is this possible? How do you decrypt the data during import?
The original data is from an MS SQL database to be transferred to a PostgreSQL database.
MS SQL ----- CSV (some columns are encrypted) ---- PostgreSQL (all columns decrypted)
I posted the same question on the mysql category. I wanted to delete it since I just realized today that I posted it on the wrong category but seems like there is no way I can delete.
Hello
How can i say this I would like my if statement to say: if what the client types in Form1.Cust is = to the Select Statement which should be running off form1.Cust then show the Cust otherwise INVALID CUSTOMER NUMBER .here is my if statement.
<% If Request.Form("Form1.Cust") = Request.QueryString("RsCustNo") Then%> <%=Request.Params("Cust") %> <% Else %> <p>INVALID CUSTOMER NUMBER</p> <% End If%>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:RsCustNo %>"
ProviderName="<%$ ConnectionStrings:RsCustNo.ProviderName %>" SelectCommand="SELECT [CU_CUST_NUM] FROM [CUSTOMER] WHERE ([CU_CUST_NUM] = ?)">
<SelectParameters>
<asp:FormParameter FormField="Cust" Name="CU_CUST_NUM" Type="String" />
</SelectParameters>
</asp:SqlDataSource>any help would be appreciated
Is there a SELECT statement that will return a the column names of a given table?
View 5 Replies View RelatedHi guys,
anyone can help me?
i using sp to select a select statement from a join table. due to the requirement, i need to group the data into monthly/weekly basic.
so i already collect the data for the month and use the case to make a new compute column in the selete statement call weekGroup. this is just a string showing "week 1", "week 2" .... "week 5".
so now i want to group the weekgroup and disply the average mark. so i need to insert all the record from the select statement into the temporary table and then use 2nd select statement to collect the new data in 5 record only. may i know how to make this posible?
regards
terence chua
I have 2 tables in a 1: n relation. How can i get a select statement that the field in the n-relation with outputs, separated by a semicolon; Example: One person have many Job Titles
Table1 (tblPerson)
Table2 (tblTitles)
1, "John", "Miller", "Employee; Admin; Consultant"
2, "Joan", "Stevens", "Employee, Software Engineer, Consultant"
and so on .... 1 in select statement: