Using Select Results In A Stored Procedure
Jul 23, 2005
I'm sure this is an obvious question but much of SQL is new to me.
I have a stored procedure and I want to use the results of a select
statement elsewhere in the stored prcedure. The select statement will
return at most one record and only one column, here's an example :
select top 1 Sequence from MyTable
where ParentId=4 and Sequence > 200 order by sequence
Can I put this result in a variable? Do I have to use SELECT INTO
TempTable and refer to TempTable and then drop the table at the end of
the stored procedure? I have read a little about cursors, are these
the way to go?
I'm confused as to what my options are, any help or links to help will
be appreciated.
Thanks for reading.
View 1 Replies
ADVERTISEMENT
Feb 2, 2008
Hello,I have written a stored procedure where I prompt the user for the Year and the Month (see below)How do I take the variable @TheMonth and find out how many days is in the month and then loop to display a total for every day in the selected month.Can someone please point me in the right direction.
CREATE PROCEDURE crm_contact_frequency_report
@TheYear varchar(4),@TheMonth varchar(2)
AS
SELECT
/* EMAILS (B) */(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Email B ON A.subject = B.subject WHERE (YEAR(B.CreatedOn) = @TheYear) AND (MONTH(B.CreatedOn) = @TheMonth) AND (B.directioncode = 1)) AS Total_EmailOutgoing,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Email B ON A.subject = B.subject WHERE (YEAR(B.CreatedOn) = @TheYear) AND (MONTH(B.CreatedOn) = @TheMonth) AND (B.directioncode = 0)) AS Total_EmailImconing,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Email B ON A.subject = B.subject WHERE (YEAR(B.CreatedOn) = @TheYear) AND (MONTH(B.CreatedOn) = @TheMonth) AND (B.directioncode IS NULL)) AS Total_EmailNotListed,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Email B ON A.subject = B.subject WHERE (YEAR(B.CreatedOn) = @TheYear) AND (MONTH(B.CreatedOn) = @TheMonth)) AS Total_All_Emails,
/* PHONE CALLS (C) */(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN PhoneCall C ON A.subject = C.subject WHERE (YEAR(C.CreatedOn) = @TheYear) AND (MONTH(C.CreatedOn) = @TheMonth) AND (C.directioncode = 1)) AS Total_CallOutgoing,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN PhoneCall C ON A.subject = C.subject WHERE (YEAR(C.CreatedOn) = @TheYear) AND (MONTH(C.CreatedOn) = @TheMonth) AND (C.directioncode = 0)) AS Total_CallIncoming,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN PhoneCall C ON A.subject = C.subject WHERE (YEAR(C.CreatedOn) = @TheYear) AND (MONTH(C.CreatedOn) = @TheMonth) AND (C.directioncode IS NULL)) AS Total_CallNotListed,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN PhoneCall C ON A.subject = C.subject WHERE (YEAR(C.CreatedOn) = @TheYear) AND (MONTH(C.CreatedOn) = @TheMonth)) AS Total_All_Calls,
/* FAXES (D) */(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Fax D ON A.subject = D.subject WHERE (YEAR(D.CreatedOn) = @TheYear) AND (MONTH(D.CreatedOn) = @TheMonth) AND (D.directioncode = 1)) AS Total_FaxOutgoing,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Fax D ON A.subject = D.subject WHERE (YEAR(D.CreatedOn) = @TheYear) AND (MONTH(D.CreatedOn) = @TheMonth) AND (D.directioncode = 0)) AS Total_FaxIncoming,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Fax D ON A.subject = D.subject WHERE (YEAR(D.CreatedOn) = @TheYear) AND (MONTH(D.CreatedOn) = @TheMonth) AND (D.directioncode IS NULL)) AS Total_FaxNotListed,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Fax D ON A.subject = D.subject WHERE (YEAR(D.CreatedOn) = @TheYear) AND (MONTH(D.CreatedOn) = @TheMonth)) AS Total_All_Faxes
FROM CampaignResponse AGO
View 2 Replies
View Related
May 18, 2004
Hi,
Can anyone tell me how to access the results from a select statement within the stored procedure?
This is to implement auditting functionality, before updating a record i want select the original record and compare the contents of each field with the varibles that are passed in, if the fields contents has changed i want to write an audit entry.
So i'd like to store the results of the select statement in a variable and access it like a dataset. e.g
declare selectResult
set selectResult = Select field1,field2,field3 from table1
if selectResult.field1 <> @field1
begin
exec writeAudit @var1,@var2,var3
end
Many thanks.
View 4 Replies
View Related
Aug 29, 2005
I ran my SP in QA and it brought back some data from my live database but I had my test DB selected from the DDL at the top of the screen. So i ran a Select statement on the whole table in a different query window (with the same parameters)and it gave me the correct info. Any idea y? They both should be bringing back information from the same table not one from my live DB and one from my TEST DB. Please help me--I'm so lost!min max rate <----This is what my stored procedure brought back(data from my live DB) ---it has parameters 90 100 .4080 89 .3070 79 .2559 69 .1549 58 .10The stored procedure is as follows: CREATE PROCEDURE dbo.sp_WageMatrix_GetRate( @CompanyID nvarchar(2), @FacilityID nvarchar(2))AS SET NOCOUNT ON;SELECT [Min], [Max], Rate FROM Performance.dbo.WageMatrix WHERE (CompanyID = @CompanyID) AND (FacilityID = @FacilityID) AND PeriodID = dbo.fn_GetCurrentPeriod(CompanyID, FacilityID)ORDER BY RangeIDmy select statement brought back the following:min max rate 90 100 .4080 89 .3070 79 .2560 69 .15and I ran the following select statement: SELECT [Min], [Max], [Rate] FROM [PerformanceDEV].[dbo].[WageMatrix] where companyid = '21' and facilityid = '01' and periodid = 2order by rangeid
View 2 Replies
View Related
Jan 10, 2006
Hi.
I am new to SQl server. I would like to write a query with the follwing logic:
---------
Select department from table1;
then insert each result row into a table with in the same query.
---------
View 2 Replies
View Related
Aug 21, 2007
Is there a way to select the results of an SP into a variable.
For example:
DECLARE @X varchar(1000)
SELECT @X= sp_who2
How do I do this?
View 3 Replies
View Related
Jul 23, 2005
I need to run a stored procedure on all the results of a select query.For a simplified example, I'd like to be able to do something likethis:SELECT JobID, QtyToAddFROM JobsWHERE QtyToAdd > 0Then for the results of the above:EXEC sp_stockadd @JobID, @QtyToAddWhere the above line ran for every result from the above select query.Anyone able to shed some light on how to do this?Many thanks,James
View 2 Replies
View Related
Nov 20, 2007
I have a script with a number of different Left Joins. When I run it in Query Analyzer the Left Join works as a normal join and suppresses some rows. However when the same code is used in a stored procedure the correct results are produced when the stored procedure is executed.
Can anyone tell me what is causing this?
SELECT USR.ROLEUSER
,PER.NAME
,EMP.PAYGROUP
,USR.ROLENAME
,OPR.EMPLID
,OPR.OPRDEFNDESC
,OPR.ACCTLOCK
,OPR.ROWSECCLASS
,EMP.JOBCODE
,JCD.DESCR
,EMP.DEPTID
,EMP.DEPTNAME
FROM PSROLEUSER USR
JOIN
PSOPRDEFN OPR
ON
USR.ROLEUSER = OPR.OPRID
LEFT OUTER JOIN
PS_PERSONAL_DATA PER
ON
OPR.EMPLID = PER.EMPLID
LEFT OUTER JOIN
PS_EMPLOYEES EMP
ON
OPR.EMPLID = EMP.EMPLID
LEFT OUTER JOIN
PS_JOBCODE_TBL JCD
ON
JCD.SETID = 'RBLTT'
AND EMP.JOBCODE = JCD.JOBCODE
AND JCD.EFFDT =
(SELECT MAX(EFFDT)
FROM PS_JOBCODE_TBL
WHERE JCD.SETID = SETID
AND JCD.JOBCODE = JOBCODE
AND EFFDT <= GETDATE())
WHERE OPR.ACCTLOCK = 0
AND USR.ROLENAME = 'RBL MANAGER'
AND EMP.PAYGROUP NOT IN ('RBA', 'RMA')
View 2 Replies
View Related
Dec 4, 2014
I have a stored procedure on a SQL Server 2008 database. The stored procedure is very simple, just a SELECT statement. When I run it, it returns 422 rows. However, when I run the SELECT statement from the stored procedure, it returns 467 rows. I've tried this by running both the stored procedure and the SELECT statement in the same SSMS window at the same time, and the behavior is the same. The stored procedure is:
USE [REMS]
GO
/****** Object: StoredProcedure [mobile].[GetAllMobileDeviceUsers] Script Date: 12/04/2014 */
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[Code] ....
When I do this in the same SSMS window:
exec mobile.GetAllMobileDeviceUsers
SELECT
ee.EmployeeID,
EmployeeName = LastName + ', ' + FirstName
FROM EmployeeInvData ee
--UNION
[Code] ....
I get two result sets. The first is 422 rows; the second is 467 rows. Why?
View 4 Replies
View Related
Mar 3, 2008
Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
View 11 Replies
View Related
Jun 13, 2007
Seems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID, S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName', T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID FROM [Item].ItemDetails I INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID FROM [Item].ItemDetails IOr something like that... Any thoughts?
View 3 Replies
View Related
Nov 14, 2014
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
View 1 Replies
View Related
Jun 17, 2004
Hi,
I need to keep track of the number of hits on a particular page. Im using a stored Procedure
What I want to do is get the number of hits and increment it by one :)
ie: Sub Procedure should be like below
SELECT noOfHits WHERE pageName = 'bla bla'
noOfHits = noOfHits + 1 etc.
Also, some of the pages will be added and deleted all the time, so before I increment the noOfHits variable I need to check that the pageName 'bla bla' exists. AND if it doesnt I need to create a pageName called 'bla bla'
What I need to do in essence is:
1. Check that a particular row exists. if it doesnt create it.
2. Increment a value (by one) to a column in this particular row.
Phew. Hope you got that. Any ideas much appreciated,
Thanks,
Pete
View 4 Replies
View Related
Jul 23, 2005
Hi, How can I store a stored procedure's results(returning dataset) intoa table?Bob*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
Jun 18, 2004
datagrid. Sorry, I'm new to it. For the few times I've done datagrids in the past, I've built
my own selects and filled the grid. This time I need to use someone elses stored procedure.
I simply don't know how to get the results back into my VB datagrid. Can someone point
me in the right direction? Thanks.
View 6 Replies
View Related
Feb 1, 2007
How do I filter the results of a stored procedure?
View 2 Replies
View Related
Feb 25, 2008
Hi
I am trying to execute a stored procedure (which returns multiple tables) and use these results to populate an Excel file. I am totally lost on how to capture the results and use it. Any help will be appreciated.
Thanks
View 8 Replies
View Related
May 7, 2008
In my SPs, I commonly have a situation, where a SELECT statement gets a single scalar value (e.g. SELECT Name FROM Employee WHERE id=@id) from a table.
Because the result is still a relation, I cannot process it directly or assign the result to a variable
(like set @name = SELECT Name FROM Employee WHERE id=@id)
So, how can I process the results of the statement in this case.
In some other cases, the result is actually a relation. And I want to iterate over all rows, processing each row's columns.
(I know this smells of ADO.NET, but how can I help it if I am coming from that background)...
The point is I want to do all this in T-Sql on server side!!!
View 13 Replies
View Related
May 15, 2007
Hi,I'm creating a stored procedure that pulls information from 4 tables based on 1 parameter. This should be very straightforward, but for some reason it doesn't work.Given below are the relevant tables: SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[tbl_Project](
[ProjID] [varchar](300) NOT NULL,
[ProjType] [varchar](20) NULL,
[ProjectTitle] [varchar](max) NULL,
[ProjectDetails] [varchar](max) NULL,
[ProjectManagerID] [int] NULL,
[RequestedBy] [varchar](max) NULL,
[DateRequested] [datetime] NULL,
[DueDate] [datetime] NULL,
[ProjectStatusID] [int] NULL,
CONSTRAINT [PK__tbl_Project__0B91BA14] PRIMARY KEY CLUSTERED
(
[ProjID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[tbl_Project] WITH CHECK ADD CONSTRAINT [FK_tbl_Project_tbl_ProjectManager] FOREIGN KEY([ProjectManagerID])
REFERENCES [dbo].[tbl_ProjectManager] ([ProjectManagerID])
GO
ALTER TABLE [dbo].[tbl_Project] CHECK CONSTRAINT [FK_tbl_Project_tbl_ProjectManager]
GO
ALTER TABLE [dbo].[tbl_Project] WITH CHECK ADD CONSTRAINT [FK_tbl_Project_tbl_ProjectStatus] FOREIGN KEY([ProjectStatusID])
REFERENCES [dbo].[tbl_ProjectStatus] ([ProjectStatusID])
GO
ALTER TABLE [dbo].[tbl_Project] CHECK CONSTRAINT [FK_tbl_Project_tbl_ProjectStatus]
-----------------------------------------------------------------
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[tbl_Report](
[ReportName] [varchar](50) NOT NULL,
[ProjID] [varchar](300) NULL,
[DeptCode] [varchar](50) NULL,
[ProjType] [varchar](50) NULL,
[ProjectTitle] [varchar](500) NULL,
[ProjectDetails] [varchar](3000) NULL,
[ProjectManagerID] [int] NULL,
[RequestedBy] [varchar](50) NULL,
[DateRequested] [datetime] NULL,
[DueDate] [datetime] NULL,
[ProjectStatusID] [int] NULL,
CONSTRAINT [PK_tbl_Report] PRIMARY KEY CLUSTERED
(
[ReportName] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[tbl_Report] WITH CHECK ADD CONSTRAINT [FK_tbl_Report_tbl_ProjectManager] FOREIGN KEY([ProjectManagerID])
REFERENCES [dbo].[tbl_ProjectManager] ([ProjectManagerID])
GO
ALTER TABLE [dbo].[tbl_Report] CHECK CONSTRAINT [FK_tbl_Report_tbl_ProjectManager]
GO
ALTER TABLE [dbo].[tbl_Report] WITH CHECK ADD CONSTRAINT [FK_tbl_Report_tbl_ProjectStatus] FOREIGN KEY([ProjectStatusID])
REFERENCES [dbo].[tbl_ProjectStatus] ([ProjectStatusID])
GO
ALTER TABLE [dbo].[tbl_Report] CHECK CONSTRAINT [FK_tbl_Report_tbl_ProjectStatus]
--------------------------------------------------------------
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[tbl_ProjectStatus](
[ProjectStatusID] [int] IDENTITY(1,1) NOT NULL,
[ProjectStatus] [varchar](max) NULL,
CONSTRAINT [PK__tbl_ProjectStatu__023D5A04] PRIMARY KEY CLUSTERED
(
[ProjectStatusID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
-----------------------------------------------------------
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[tbl_ProjectManager](
[ProjectManagerID] [int] IDENTITY(1,1) NOT NULL,
[FName] [varchar](50) NULL,
[LName] [varchar](50) NULL,
[Inactive] [int] NULL,
CONSTRAINT [PK__tbl_ProjectManag__7D78A4E7] PRIMARY KEY CLUSTERED
(
[ProjectManagerID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
And here is the stored procedure that I wrote (doesn't return results): SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[GetReportQuery]
(
@ReportName varchar(100)
)
AS
BEGIN
SET
NOCOUNT ON
IF @ReportName IS NULL
BEGIN
RETURN -1
END
ELSE
BEGIN
DECLARE @DeptCode varchar(50), @ProjID varchar(50)
SELECT @DeptCode = DeptCode FROM tbl_Report WHERE ReportName = @ReportName
SET @ProjID = @DeptCode + '-' + '%'
SELECT P.ProjID, P.ProjType, P.ProjectTitle, P.ProjectDetails, M.FName, M.LName, P.DateRequested, P.DueDate, S.ProjectStatus
FROM tbl_Project P, tbl_ProjectManager M, tbl_ProjectStatus S
WHERE ((P.ProjID = (SELECT ProjID FROM tbl_Report WHERE ((ReportName = @ReportName))))
AND (P.ProjectDetails = (SELECT ProjectDetails FROM tbl_Report WHERE ReportName = @ReportName) OR P.ProjectDetails IS NULL)
AND (M.FName = (SELECT FName FROM tbl_ProjectManager WHERE (ProjectManagerID = (SELECT ProjectManagerID FROM tbl_Report WHERE ReportName = @ReportName))) OR M.FName IS NULL)
AND (M.LName = (SELECT LName FROM tbl_ProjectManager WHERE (ProjectManagerID = (SELECT ProjectManagerID FROM tbl_Report WHERE ReportName = @ReportName))) OR M.LName IS NULL)
AND (P.DateRequested = (SELECT DateRequested FROM tbl_Report WHERE ReportName = @ReportName) OR P.DateRequested IS NULL)
AND (P.DueDate = (SELECT DueDate FROM tbl_Report WHERE ReportName = @ReportName) OR P.DueDate IS NULL)
AND (S.ProjectStatus = (SELECT ProjectStatusID FROM tbl_Report WHERE ReportName = @ReportName) OR S.ProjectStatus IS NULL)
)
END
END Can someone see what's wrong? Thanks.
View 7 Replies
View Related
Mar 30, 2008
I am having trouble getting data back from my stored procedure insert commands. Here is what I currently have set up.
1 - A dataset called YagDag
2 - A Table adapter called tadUsers
3 - A Stored Procedure that the tadUsers uses to insert called spUser_i
It seems like the way I have my VB code set up I can only retrieve a return int. I can't figure out how to get my User GUID back, any help would be really appreciated
Public Shared Function AddUser(ByVal EMail As String, ByVal FirstName As String, ByVal LastName As String, ByVal Password As String, ByVal EMailActive As Boolean) As Integer
Dim strEMail = AppFunction.SQLSafeString(EMail)
Dim strFirstName = AppFunction.SQLSafeString(FirstName)
Dim strLastName = AppFunction.SQLSafeString(LastName)
Dim strPassword = AppFunction.SQLSafeString(Password)
Dim blnEMailActive = EMailActive
Dim Users As New YagDagTableAdapters.tadUsers
Dim guidUserYID As Guid = Users.Insert(strFirstName, strLastName, strPassword)
Return 1
End Function -- =============================================
-- Author:Greg Moser
-- Create date: 3/29/2008
-- Description:Adds a User to the tblUser
-- =============================================
ALTER PROCEDURE [dbo].[spUser_i]
@FirstName varchar(50),
@LastName varchar(50),
@Password varchar(16)
AS
BEGIN
SET NOCOUNT ON;
DECLARE @UserYID uniqueidentifier
SET @UserYID = NEWID()
-- Add User to tblUsers
INSERT INTO tblUsers (
YID,
Password,
FirstName,
LastName
)
VALUES (
@UserYID,
@Password,
@FirstName,
@LastName
)
--Return Users YID
SELECT @UserYID
END
View 2 Replies
View Related
Sep 23, 2004
Hi,
Is there a way I can display the data returned from more than one stored procedure in a report using reporting services. Or can I use more than one dataset in the report????
View 3 Replies
View Related
Oct 8, 2004
Two questions - one slightly off topic:
1) How do I write a stored procedure in MS SQL so that it returns a results set?
2) How do I get this into ASP.NET so that I can put the values into controls?
Jags
View 1 Replies
View Related
Oct 28, 1999
I wrote a stored procedure with three variables to be passed as input parameters. The stored procedure runs a select into statement into a temp table. The resulting temp table with another table was queried using right outer join to produce the desired results.
The stored procedure compiles error free.However when I ran the stored procedure with the parameters(3) in ISQL/W (SQL Server 6.5) the headers(column-names) were displayed but no records.
When runned as a query with the same parameter values, records were produced.
Help please urgent.
Regards
Olutimi Ooruntoba
View 2 Replies
View Related
Jul 13, 2006
I'm testing some code to look up values from my database and update a specific field when certain conditions are met. I'm having trouble with some code that is giving me the results I expect when I submit one set of parameters, but is not finding anything in the database for another set, when I know the data exists.
Here's the code for my stored procedure, SP:
Code:
@flightid bigint,
@departuretime smalldatetime
SELECT flightid, flightno, departuretime, origincode, destinationcode
FROM flightschedules
WHERE flightid <> @flightid
AND departuretime = CONVERT(SMALLDATETIME, @departuretime, 120)
And here's the vbscript that calls it:
Code:
vOutboundID = 452
vReturnID = 453
'--- Get the flight details ---
strOrigin = "confirmflightdetails '" & vOutboundID & "';"
set rsOrigin = Server.CreateObject("ADODB.Recordset")
rsOrigin.Open strOrigin, objConn
response.write "origin " & rsOrigin("departuretime") & "<BR>"
strReturn = "confirmflightdetails '" & vReturnID & "';"
set rsReturn = Server.CreateObject("ADODB.Recordset")
rsReturn.Open strReturn, objConn
response.write "return " & rsReturn("departuretime") & "<BR>"
strGetOFID = "SP '" & vOutboundID & "', '" & rsOrigin("departuretime") & "';"
set rsOFID = Server.CreateObject("ADODB.Recordset")
rsOFID.Open strGetOFID, objConn
DO WHILE NOT rsOFID.EOF
response.write "OFNO " & rsOFID("flightno") & " " & rsOFID("flightid") & "<br>"
rsOFID.MoveNext
Loop
strGetRFID = "SP '" & vReturnID & "', '" & rsReturn("departuretime") & "';"
set rsRFID = Server.CreateObject("ADODB.Recordset")
rsRFID.Open strGetRFID, objConn
DO WHILE NOT rsRFID.EOF
response.write "RFNO " & rsRFID("flightno") & " " & rsRFID("flightid") & "<br>"
rsRFID.MoveNext
Loop
Here's the code for confirmflightdetails:
Code:
@flightid bigint
AS
SELECT flightid, flightno, departuretime
FROM flightschedules
WHERE flightid = @flightid
When confirmflightdetails is tested, I the proper results, as confirmed by the response.write statements:
4521092006-07-29 08:00:00
4531102006-07-29 12:05:00
I put the response.write statements and loops in so I could verify the functionality.
Here's what it produces:
out 452
ret 453
origin 7/29/2006 8:00:00 AM
return 7/29/2006 12:05:00 PM
OFNO 109 450
Here's what it should produce:
out 452
ret 453
origin 7/29/2006 8:00:00 AM
return 7/29/2006 12:05:00 PM
OFNO 109 450
RFNO 110 451
If I do this in query analyzer:
Code:
select flightid, flightno, departuretime
from flightschedules
where flightid > 449 and flightid < 454
this is what I get from the database:
flightid flightno departuretime origin destination
4521092006-07-29 08:00:00 A C
4501092006-07-29 08:00:00 A B
4531102006-07-29 12:05:00 C A
4511102006-07-29 13:15:00 B A
What I'm trying to do is look up the chosen flight, then find the flight with the matching origin/destination (the other flight leg) on the same day.
I can't figure out why it's working for one set of parameters and not for the other.
Thanks in advance for any help!
View 1 Replies
View Related
Dec 19, 2004
Hi,
I'm trying to write a nested stored procedure, with the outer proc named "spAssociate", and inner proc named "spSales".
So far I have created the inner proc
CREATE PROCEDURE spSales@userID intASSET NOCOUNT ON
SELECT SalesOppID
FROM Sales_Opportunities
WHERE SalesOppCurrentStatus NOT IN ('Sale Lost','Sales Closed','Sale Closed','Unqualified','Deferred','Dropped')
AND OppOwnerUserID = @userIDGO
This was successfully created. I wanted to use the return set in the outer proc, which I tried creating as:
CREATE PROCEDURE spAssociate(@userID int,
@containerType varchar(100),
@associateType varchar(100))AS SET NOCOUNT ON
SELECT AssociateID
FROM AppRelations
WHERE ContainerType=@containerType
AND ContainerID IN (EXECUTE spSales @userID)
AND AssociateType=@associateType GO
I get an error "incorrect syntax near execute".
How can I use the results from the inner proc for the WHERE condition in my outer proc?
Any help is greatly appreciated. Thanks!
View 2 Replies
View Related
Jul 31, 2007
how can i refer to the results of a query inside a stored procedure?
and use them later
View 8 Replies
View Related
Jun 7, 2006
Hi,I created a VB SQL CRL Stored procedure for calculating a value. Valueis returned as belowUsing sConn4 As New SqlConnection("context connection=true")sConn4.Open()scmd = New SqlCommand("SELECT " & var_max, sConn4)sdrd = scmd.ExecuteReader()SqlContext.Pipe.Send(sdrd)End UsingWhen calling this stored procedure from a TSQL stored procedure forusing the value for further processing the value returned to myvariable is 0. The correct value should be 56. In results tab I get thecorrect result, but how can I assign it to my variable @max ?DECLARE @max1 intDECLARE @max intEXEC @max1 = [dbo].[VBSTP_calculate_MAX_no]@vsp_table_name = N'[dbo].[Message]',@vsp_table_key = N'message_no',@vsp_WHERE = N''print @max1 -- value here is 0SET @max = (SELECT @max1)Thanks a lot.
View 1 Replies
View Related
Jul 8, 2006
hi, hvae a little trouble with thos procedure.
When executed it always adds 2 to the value of fields Telefon and Mobil.
Can anyone help me, please
Kurt
ALTER Procedure opdaterbruger
(
@Initialer nvarchar(100),
@Mailadr nvarchar(100),
@Telefon float(8),
@PlusNet float(8),
@Mobil float(8),
@pnmobil float(8)
)
AS
UPDATE Brugere
SET Mailadresse = @Mailadr
WHERE Initialer = @Initialer
IF (@Initialer= '0') OR NOT EXISTS ( SELECT * FROM PNetlokal WHERE Bruger = @Initialer)
INSERT INTO pnetlokal ( Bruger, Kortnr, Telnr )
VALUES ( @initialer, @Plusnet, @Telefon)
ELSE
UPDATE PNetLokal
SET TelNr = @Telefon, KortNr = @PlusNet
WHERE Bruger = @Initialer
IF (@Initialer= '0') OR NOT EXISTS (SELECT * FROM PlusNet WHERE Bruger = @Initialer )
INSERT INTO plusnet (Bruger, Kortnr, Mobilnr)
VALUES (@initialer, @pnMobil, @mobil)
ELSE
UPDATE PlusNet
SET Mobilnr = @Mobil, KortNr = @pnmobil
WHERE Bruger = @Initialer
View 5 Replies
View Related
Sep 30, 2006
I need to return the results of a stored procedure into a temporary table. Something like this:
Select * into #temp from exec (the stored procedure). It appears that I can not do this.
The following will not work for me cause I am not sure how many columns will be returned. I want this to work even if the calling stored procedure is changed (i.e add or take away columns)
insert into (...) exec (the stored procedure.
Does anyone have any ideas how I could do this.
View 4 Replies
View Related
May 17, 2007
If I have multiple selects statements in one stored procedure. How do I access the different results in a report in Reporting Services? Where the first select is the detail lines of my report and the second select is just a field for a my header? Or am I going about this wrong with putting it all the results I want into one stored procedure for one report?
Example stored procedure:
ALTER PROCEDURE [dbo].[proc_DepositsByOfficer]
As
SELECT MASTER_DSC.APP
, MASTER_DSC.BRANCH
, qlkpOfficer.strName
, MASTER_DSC.DSC_OFFICER_49
, qlkpBranchName.strDescrS
, MASTER_DSC.DSC_CUR_BAL_21
, Case MASTER_DSC.APP WHEN 1 Then DSC_CUR_BAL_21 End AS DDA_BAL
, Case MASTER_DSC.APP WHEN 2 Then DSC_CUR_BAL_21 End AS SAV_BAL
, Case MASTER_DSC.APP WHEN 3 Then DSC_CUR_BAL_21 End AS CD_BAL
, MASTER_DSC.DSC_INT_RATE_45
, Case When [DSC_CUR_BAL_21]>0 Then ([DSC_CUR_BAL_21]*[DSC_INT_RATE_45])/100 Else 0 End As ANN_EXP
, Case When [DSC_CUR_BAL_21]>0 And MASTER_DSC.APP=1 Then ([DSC_CUR_BAL_21]*[DSC_INT_RATE_45])/100 Else 0 End AS ANN_EXP_DDA
, Case When [DSC_CUR_BAL_21]>0 And MASTER_DSC.APP=2 Then ([DSC_CUR_BAL_21]*[DSC_INT_RATE_45])/100 Else 0 End AS ANN_EXP_SAV
, Case When [DSC_CUR_BAL_21]>0 And MASTER_DSC.APP=3 Then ([DSC_CUR_BAL_21]*[DSC_INT_RATE_45])/100 Else 0 End AS ANN_EXP_CD
, Case MASTER_DSC.APP WHEN 1 Then 1 End AS DDA_Count
, Case MASTER_DSC.APP WHEN 2 Then 1 End AS SAV_Count
, Case MASTER_DSC.APP WHEN 3 Then 1 End AS CD_Count
, qlkpApplicationCode.strDescrS AS strApplCode
FROM
MASTER_DSC
INNER JOIN qlkpApplicationCode ON MASTER_DSC.APP=qlkpApplicationCode.dblReference
LEFT JOIN qlkpOfficer ON MASTER_DSC.DSC_OFFICER_49=qlkpOfficer.intID
LEFT JOIN qlkpBranchName ON MASTER_DSC.BRANCH=qlkpBranchName.dblReference
WHERE
MASTER_DSC.DSC_CUR_BAL_21<>0
ORDER BY
MASTER_DSC.BRANCH;
SELECT dbo.fBankName() AS BankName;
View 7 Replies
View Related
Aug 1, 2006
I thought I would impliment a new feature of my web page using stored procedures and the SqlDataSource object, for practice or whatever, since I don't normally use that stuff.
This is the stored procedure:set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
-- =============================================
-- Author:Lance Colton
-- Create date: 7/31/06
-- Description:Find the contest winner
-- =============================================
ALTER PROCEDURE [dbo].[AppcheckContest]
-- Add the parameters for the stored procedure here
@BeginDate datetime = '1/1/2006',
@EndDate datetime = '12/31/2006',
@SectionID int = 10,
@WinnerID int = 0 OUTPUT
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
SELECT top 1 @WinnerID = P.UserID
FROM cs_Posts P
WHERE P.PostDate BETWEEN @BeginDate AND @EndDate
AND P.SectionID = @SectionID
AND P.UserID <> 2100 -- I don't want to win my own contest...
AND SettingsID = 1000 -- This number could be different if i had more than one CS installed?
AND IsApproved = 1
ORDER BY NEWID() -- yes this is slow, but it works...
RETURN @WinnerID
END
It's really simple - just needs to return the one randomly chosen integer userID. I've tested it in query designer or whatever it's called in Management Studio and it works fine there at least.
Thinking I was done the hard part, I created a new web form in visual studio, dropped a SqlDataSource on it, and used the 'configure data source' wizard from the smart tag to do all the work for me. I didn't have any trouble using the wizard to select my stored procedure, and i'm using the sa connection string to simplify my debugging. I tried using the FormParameter / FormField way of getting the output and setting the input parameters. I can't seem to get it working though. There's no errors or anything, just the output isn't coming through.
Here's the code from the aspx codebehind file:Partial Class Contest
Inherits System.Web.UI.Page
Protected Sub btnSelectWinner_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnSelectWinner.Click
Dim stuff As New System.Web.UI.DataSourceSelectArguments
SqlDataSource1.Select(stuff)
SqlDataSource1.DataBind()
lblWinnerID.Text = SqlDataSource1.SelectParameters("WinnerID").ToString
End Sub
End Class
As you can see, I wasn't sure if you're supposed to call databind() or select() to actually get the stored procedure to execute, so I tried both. I was hoping the last line of code there would set the label to the value contained in the @WinnerID parameter, but instead it sets it to "WinnerID".
Here's the code from the .aspx file. Most of this was generated by the Wizard, but I messed around with it a bit. <%@ Page Language="VB" MasterPageFile="~/MasterPage.master" AutoEventWireup="false" CodeFile="Contest.aspx.vb" Inherits="Contest" title="Untitled Page" %>
<asp:Content ID="Content1" ContentPlaceHolderID="CPHMain" Runat="Server">
<asp:Button ID="btnSelectWinner" runat="server" Text="Find Winner" />
<asp:Calendar ID="Calendar_From" runat="server"></asp:Calendar>
<asp:Calendar ID="Calendar_To" runat="server"></asp:Calendar>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:appcheck-csConnectionString-sa %>"
SelectCommand="AppcheckContest" SelectCommandType="StoredProcedure" CancelSelectOnNullParameter="False">
<SelectParameters>
<asp:FormParameter FormField="Calendar_From" Name="BeginDate" Type="DateTime" />
<asp:FormParameter FormField="Calendar_To" Name="EndDate" Type="DateTime" />
<asp:Parameter DefaultValue="10" Name="SectionID" Type="Int32" />
<asp:formParameter FormField="lblWinnerID" defaultvalue="666" Direction="InputOutput" Name="WinnerID" Type="Int32" />
</SelectParameters>
</asp:SqlDataSource>
<asp:Label ID="lblWinnerID" runat="server" Text="???"></asp:Label>
</asp:Content>
View 3 Replies
View Related
Apr 7, 2008
Hi I've run into a slight problem with my stored procedure.If I fire a query in a stored procedure, how can I access the results of that query in the stored procedure itself ?? ALTER PROCEDURE GetDetailsOfWebsiteUserForMail @request_id intAS declare @k int select person_id from Website_user w, Request r where r.user_id=w.user_id and r.request_id=@request_id set @k =person_id /* What do I do here??, value returned is unique */ if (@k!=0) /* Exists */ begin /* do something */ end else /* entry on person table does not exist */ begin /* do something */
end
View 1 Replies
View Related
Oct 1, 2007
Hi all,
Please ignore my ignorance, but I was wondering if someone could help me out a bit?
I'm trying to export the results from a stored proc, to an csv file.
So for example, I want to run this query:
SELECT TOP 10 pkID FROM myTable ORDER BY pkID DESC
and I wanted it to be saved to:
C:spExport.csv
How would I go about doing that?
Hope you can help :-)
bwuk
View 2 Replies
View Related
