I have to find the number of orders sent to two different postal codes but to get all of the right columns, I have to use 2 different tables.
So, I used WHERE to connect the two tables with the primary keys, but where do I use the specific criteria for the exact postal codes?
I'm looking to find out how I'd go about setting up a database where avisitor to my site could punch in their postal code, and find out how farthey are from another postal code. For example, AutoTrader has this featureI believe to tell you how far the vehicle is from you. Dating sites havethem so you can do proximity searches.Anyone have any ideas where I could start? I'm thinking the post office,but if anyone else has suggestions, I'm open to hear them.Thanks!
View 4 Replies View RelatedHi,
I was wondering if it is possible to order a recordset by specific values.
That is, I want my recordset to be ordered alphabetically, but I want to set the order of the alphabet.
For example, I don't want my recordset to be odered by A, B, C, D ...I want it to be ordered by G, V, T, A ... or something.
Can you do something like
Code:
SELECT * FROM myTable ORDER BY myField (G, V, T, A, B, C, Q, X)
...etc
Thanks
e
I am trying to accomplish the following.
There are two tables. the second one is a table that contains fields based on which the exclusion logic has to be written. It has 5 fields and there may be data in all of them or only in some of them.
The first and second table have one field in common - the Account number.(ACCT_NUM)
the exclusion is based in steps..
1) if it has all the fields in the second table for that account number, then compare all of them..
2) if only 4 of them are present,compare and check for null for the rest
3) if only 3 of them are present,compare and check for null for the rest
4) if only 2 of them are present,compare and check for null for the rest.
how do i do this... pls suggest
Thanks
Here’s a more in depth breakdown of my problem:
We have 4 regions, currently we only have 3 servers in the field, and therefore only 3 regional id’s are being used to store the actual data of the pbx. The central server (RegionalID = 0) is holding the data for itself and the 4th region until the new server is deployed.
It now has to be deployed and therefore the data migration for this region has to take place.
I am trying to extract all the data for this 4th region (RegionalID= 1) from the central server database from all the relevant tables.
When doing this I will firstly, have to check that the CallerID is valid, if it is not valid, then check that RegionalDialup = ‘0800003554’ which is the dialup number for this 4th region (RegionalID = 1).
I have a table named lnkPBXUser which contains the following:
RegionalID pbxID userID
0 1012 17
0 543 2
0 10961 6
0 16499 26
0 14061 36
0 15882 2
4 15101 6
4 15101 26
6 16499 2
6 16012 26
I have a table named tblDialupLog which has 20 columns, I have selected only the columns I am interested in (below):
PBXIDDailupDT DongleAccessNum CLI RegionalID RegionalDialup
838/8/2006 8:58:11 AM T2 UQ 28924 013249370000800003554
5438/8/2006 8:55:44 AM T0 UA 33902 012362350000800003554
12198/8/2006 8:59:03 AM T3 ZD 02031 015295809500800003554
10128/8/2006 9:02:54 AM T0 UA 41261 017301105000800003554
13318/8/2006 8:59:57 AM T0 UA 01938 012460462700800003554
19798/8/2006 9:02:52 AM T0 UA 09836 016375121000800003554
19038/8/2006 8:58:41 AM T0 UA 26009 014717535600800003554
15228/8/2006 8:58:54 AM T3 MB 94595 057391287100800004249
3198/8/2006 8:51:28 AM T2 ZD 32892 054337510000800004249
32708/8/2006 9:04:26 AM T2 MB 8733100800004249
I have a table named tblCodes, it contains all regions but I only need to select the codes for RegionalID 1 :
CodeIDRegionalID ExtName SubsNDCDLocCDUpdateStatusRegionDesc
79731 PRETORIA 0123620NORTH EASTERN REGION
79741 HARTEBEESHOEK 012 30120NORTH EASTERN REGION
79751 HARTEBEESHOEK 01230130NORTH EASTERN REGION
79761 PRETORIA 01730140NORTH EASTERN REGION
79771 PRETORIA 01230150NORTH EASTERN REGION
I have a table named tblDongleArea which contains the following (below only shows dongle area codes for the fourth region( RegionalID = 1):
AreaIDRegionalIDDongleAreaCodeAreaDescUpdateStatus
121UAOumashoop0
131UBPietersburg0
141UCWarmbad01
151UDNylstroom0
161UEPotgietersrus0
271UFLouis Trichardt0
281UGMessina0
291UHEllisras0
301UIThabazimbi0
311UJPhalaborwa0
321UKTzaneen0
331UTStanderton0
341UMMeyerton0
351UNNelspruit0
361UOWitrivier0
371UPLydenburg0
381UQMiddelburg0
391URWitbank0
401USBronkhorstspruit0
461UZOlifantsfontein0
I have a table named tblRegionalNumbers which contains the following, as you can see the RegionalDialup for the fourth region = 0800003554:
RegionalID RegionalDialupRegionUpdateStatusRegionCodeLocalRegion
10800003554North Eastern010
20800005027Gauteng020
30800006194Eastern030
40800004249Central040
50800201859Southern050
60800201989Western060
70800113515HO101
80800222204Tellumat070
Ok, I am dealing with the lnkPBXUser table at the moment,
I need to be able to join lnkPBXUser and tblDialupLog, then compare tblDialupLog.CLI to tblCodes.SubsNDCD + tblCodes.LocCD (when these two columns are concatenated the result will only be a substring of tblDialupLog.CLI. (this is to make sure that the CLI exists in tblCodes.)
If it does exist, then it is part of the fourth region and should be returned in the result set.
If it does not exist, I then need to check that tblDongle.DongleAreaCode is a substring of tblDialupLog.DongleAccessNumber.
If it is a valid DongleAreaCode for that region, then it is part of the fourth region and should be returned in the result set.
If it does not exist, I then need to check that tblDialupLog.RegionalNumber = ‘080003554’.
So from the above tables an expected result would be:
RegionalID pbxID userID
0 1012 17
0 543 2
Please assist, it would be greatly appreciated.
Regards
SQLJunior
I'm trying to create a form that allows someone to find an
address from a postal code search in the database. My query works exactly as I’d
like in query builder using the following select:
Select [FIELD_LIST] from addresses WHETE POSTCODE LIKE ‘%’+@POSTCODE+’%’
I then pass the user entered post code to the select statement
which is executed. However, I’m getting some odd behaviour. Assuming there is
an address in the database with the post code
“LS11 0ES”...
If I search for LS11, nothing is returned;
If I search for LS11%, nothing is returned;
If I search for %LS11%, nothing is returned;
If I search for %LS11%%, the data is returned.
If I search for %LS%1%%, the data is returned (as is LS21
0ES etc. etc.).
However, I want the user to be able to enter shorter search
strings and it to pull all the data back out, so they can enter a substring
such as LS and it will pull out all the data without the users needing to enter
the full pattern of % symbols.
If I go into query builder (in visual web developer) and
enter just “LS” it works as I’d want, but not when pulled from a web page.
Any ideas?
Thanks
I got a table with organisation codes with postcal code ranges, from-to.
Example:
Organisationcode, startpostalcode, endpostalcode
001 52005249
I would like to generate rows for this range like this:
001 5200
001 5201
001 5202
.....
001 5249
The table looks like this:
SELECT OrganisationCode, PostcalCodeStart, PostalCodeEnd
FROM dbo.DimOrganisation
For example, consider the following queries:
DECLARE @SomeParam INT
SET @SomeParam = 44
SELECT *
FROM TableA A
JOIN TableB B ON A.PrimaryKeyID = B.ForeignKeyID
WHERE B.SomeParamColumn = @SomeParam
SELECT *
FROM TableA A
JOIN TableB B ON A.PrimaryKeyID = B.ForeignKeyID AND B.SomeParamColumn = @SomeParam
Both of these queries return the same result set, but the first query filters the results in the WHERE clause whereas the the second query filters the results in the JOIN criteria. Once upon a time a DBA told me that I should always use the syntax of the first query (WHERE clause). Is there any truth to this, and if so, why?
Thanks.
I need to select specific values from all rows where the value of a specific column is "Active"
This part works: SELECT LastName, FirstName, MiddleInit, ClientId FROM dbo.Client
But I want to add: WHERE StatusType = (Active) and how to do this.
We have a "main" SQL 2014 server who imports XML files using SSIS in a datacenter. In remote sites (which are warehouses), there is an instance of SQL 2014 Express. A merge replication is setup, as every operations done on each site must be "forwared" to the main database, as some XML files are generated as output for an ERP system.
Now, the merge replication replicate all the data to the server on each sites. But a specific site don't need the data of every other sites, only the data relevant to itself (which is the warehouse code). Is there a way to replicate only the data relevant to each individual sites to the subscribers? Or is there a better way than replication to accomplish this?
I want to ship 500,000 aged transactions each night to an archive table and delete them from their source table in one or more logical units of work (LUW). Each row is approx 60 bytes and there is only one non clustered index on the source table presently.
I'm trying to weigh the pros and cons of 3 alternatives. One of them would basically insert the non-aged rows into tempdb, ship the aged records, truncate the table and then insert the tempdb records back into their source all in the same LUW.
For this alternative, I'd at least like to turn off logging when the records get inserted into tempdb as I dont see any value in logging that part of the activity. Is this possible?
Hi All,
Could you guys please help me with printing reports invoked thru command line/ URL access to print automatically to specific printers and specific trays and also is it possible to set the specific printer and tray as parameters.
Any suggestions is appreciated
Thanks A lot in advance
e,g :
http://localhost/reportserver?/testreports/employee sales&UserID='ABC'&LName=Lastname='victor'&rs:Command=Render
I think this simple. First I would like to know how to get the exact date (today's date)?
View 20 Replies View RelatedHi there !
Thanks for taking the time to read this thread.
I don't know whether anyone has this problem, but I am definitely not using the right keywords to search for a thread.
My situation is this...
I have a dataset that has values to fill cells to multiple tables in a report.
However, I only want to select specific data from the dataset to fill textboxes and others.
I cannot change the stored procedure, but the sample of the data is shown below:-
Row Stat Val
0 dtRpt1 02/01/2005
1 Value1 1
2 Value2 2000
3 dtMailSent 02/28/2005
4 Value3 0
5 Value4 5
6 Value5 658
I know it looks weird, but the row really represents which "row" or textbox is it to fill with the Val. The Stat Column is just a way to make sure that I am filling the right values.
so my new report would have multiple tables to denote different categories.
In my first table, I tried putting the cells as follows:-
(expressions are highlighted in italics and bold)
TextBox1 =IIF(Fields!Row.Value =0, Fields!Val.Value,"")
Table1
Column1
DetailRow1 =IIF(Fields!Row.Value =1, Fields!Val.Value,"")
DetailRow2 =IIF(Fields!Row.Value =2, Fields!Val.Value,"")
Table2
Column1
DetailRow1 =IIF(Fields!Row.Value =3, Fields!Val.Value,"")
DetailRow2 =IIF(Fields!Row.Value =4, Fields!Val.Value,"")
DetailRow3 =IIF(Fields!Row.Value =5, Fields!Val.Value,"")
DetailRow4 =IIF(Fields!Row.Value =6, Fields!Val.Value,"")
I only expect this report to print out one page holding the previous values.
However, it ended up printing like this
----------------------------------------------------------
Table1
Column1
DetailRow1 1
DetailRow2
Column1
DetailRow1
DetailRow2 2000
Table2
Column1
DetailRow1 02/28/2005
DetailRow2
DetailRow3
DetailRow4
Table2
Column1
DetailRow1
DetailRow2 0
DetailRow3
DetailRow4
Table2
Column1
DetailRow1
DetailRow2
DetailRow3 5
DetailRow4
Table2
Column1
DetailRow1
DetailRow2
DetailRow3
DetailRow4 658
------------------------------------------------------
I tried putting it into the headerrows instead of DetailRows, and it ended up printing the last value.
Is there anyway to do this ? print all the values out in one table ? I tried using textboxes, but I think I got my expression wrong.
Is this the correct expression ?
=IIF((Fields!Row.Value,"Dataset") =1, (Fields!Val.value, "Dataset"), "")
and it give me an error
The value expression for the textbox €˜textbox5€™ contains an error: [BC30455] Argument not specified for parameter 'FalsePart' of 'Public Function IIf(Expression As Boolean, TruePart As Object, FalsePart As Object) As Object'.
Appreciate any advice or suggestion for this scenario !
Thanks!
Bernard
can any help me why the same exact code works in vb.net but not in C# . case is very simple
I have a table called MenuItems which has menu items and a table sizeandprice which has price for each menuitem based on the size. simple case of 1 to many relationship between menuitems table to sizeandprice table. I am trying to display in a gridview control couple of fields from menuitems table and have another template field in which i am display price and size field from the child table which is sizeand price. so basically this is how my code looks like
Page in vb works fine
<%@ Page Language="VB" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<script runat="server">
Protected Sub GridView1_RowDataBound(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.GridViewRowEventArgs)
If e.Row.RowType = DataControlRowType.DataRow Then
Dim ds As SqlDataSource = CType(e.Row.FindControl("SqlDataSource2"), SqlDataSource)
ds.SelectParameters("fkMenuItemID").DefaultValue = GridView1.DataKeys(e.Row.RowIndex).Value
End If
End Sub
</script>
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
<title>Untitled Page</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:PPQ_DataConnectionString1 %>" SelectCommand="SELECT [MenuItemID], [MenuItemType], [ItemName] FROM [MenuItems]"></asp:SqlDataSource>
<br />
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="MenuItemID"
DataSourceID="SqlDataSource1" OnRowDataBound="GridView1_RowDataBound">
<Columns>
<asp:BoundField DataField="MenuItemID" HeaderText="MenuItemID" InsertVisible="False"
ReadOnly="True" SortExpression="MenuItemID" />
<asp:BoundField DataField="MenuItemType" HeaderText="MenuItemType" SortExpression="MenuItemType" />
<asp:BoundField DataField="ItemName" HeaderText="ItemName" SortExpression="ItemName" />
<asp:TemplateField HeaderText="Size And Price">
<ItemTemplate>
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:PPQ_DataConnectionString1 %>"
SelectCommand="SELECT [ItemSize], [ItemPrice] FROM [SizeAndPrice] WHERE ([fkMenuItemID] = @fkMenuItemID)">
<SelectParameters>
<asp:Parameter Name="fkMenuItemID" Type="Int32" />
</SelectParameters>
</asp:SqlDataSource>
<asp:Repeater ID="Repeater1" runat="server" DataSourceID="SqlDataSource2">
<ItemTemplate>
<%#Eval("ItemSize")%>: <%#Eval("ItemPrice", "$ {0:F2}")%><br />
</ItemTemplate>
</asp:Repeater>
</ItemTemplate>
</asp:TemplateField>
</Columns>
</asp:GridView>
</div>
</form>
</body>
</html>
if you would notice that in order populate my repeater with childrows i need to know the menuitemid from the parent row which i do in rowdatabound event however same code in C# does not render any values for my item price and size defined inside the repeater control. here is how the c# page looks like
<%@ Page Language="C#" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<script runat="server">
protected void GridView1_RowDataBound(object sender, GridViewRowEventArgs e)
{
if (e.Row.RowType == DataControlRowType.DataRow)
{
SqlDataSource source2 = e.Row.FindControl("SqlDataSource2") as SqlDataSource;
source2.SelectParameters["fkMenuItemID"].DefaultValue = GridView1.DataKeys[e.Row.RowIndex].Value as string;
}
}
</script>
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
<title>Untitled Page</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:PPQ_DataConnectionString1 %>"
SelectCommand="SELECT [MenuItemID], [MenuItemType], [ItemName] FROM [MenuItems]">
</asp:SqlDataSource>
</div>
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="MenuItemID"
DataSourceID="SqlDataSource1" OnRowDataBound="GridView1_RowDataBound" >
<Columns>
<asp:BoundField DataField="MenuItemID" HeaderText="MenuItemID" InsertVisible="False"
ReadOnly="True" SortExpression="MenuItemID" />
<asp:BoundField DataField="MenuItemType" HeaderText="MenuItemType" SortExpression="MenuItemType" />
<asp:BoundField DataField="ItemName" HeaderText="ItemName" SortExpression="ItemName" />
<asp:TemplateField HeaderText="Size And Price">
<ItemTemplate>
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:PPQ_DataConnectionString1 %>"
SelectCommand="SELECT [ItemSize], [ItemPrice] FROM [SizeAndPrice] WHERE ([fkMenuItemID] = @fkMenuItemID)">
<SelectParameters>
<asp:Parameter Name="fkMenuItemID" Type="Int32" />
</SelectParameters>
</asp:SqlDataSource>
<asp:Repeater ID="Repeater1" runat="server" DataSourceID="SqlDataSource2">
<ItemTemplate>
<%#Eval("ItemSize")%>: <%#Eval("ItemPrice", "$ {0:F2}")%><br />
</ItemTemplate>
</asp:Repeater>
</ItemTemplate>
</asp:TemplateField>
</Columns>
</asp:GridView>
</form>
</body>
</html>
can anyone tell me what i am doing wrong?
I'm currently working on a match function to compare two char based columns in differnet tables to create a join.
In this particular case, I'm using a few different approaches to create a higher match ratio, as typos do happen.
For instance I use a join function using convert(char(10), tbla.field) = convert(char(10), tblb.field) to match only using the first 10 characters, as a lot of records have different endings, but are in fact the same.
Are there any other ways I could attempt to make matches? I was wondering if there was a dedicated string comparison operation giving me a percentage feedback. Debut joining dbut would give an 80% match, and thus I would leave it up to the user to decide to minimum match requirements.
Thanks in advance
OK, this is a simple question for you, but i am a newbie to SQL2000, and i need to find out which Service Pack we are currently running. Could anybody please give me a short reply :)
Thanks
Chris
I've a table with values that have the '-' char, ex:LO-AS-1.I'm trying to search the table for that value but it returns more records since it breaks the search term into several others:
SELECT * FROM sys.dm_fts_parser ('"LO-AS-1"', 2070, 0, 0) returns:
lo-as-1
lo
as - noise word
1 - noise word
nn1 - noise word
Is there anyway of searching for the exact word? With LIKE it works fine but it's very slow....
Hi.
I have some contracts and i want to find for every specific contract (every contract can be repeated 2-3 or more times (same policynumber) the contracts that have the same date. That's the contracts INSIDE the contract that have the same data.
I was trying something like
select distinct m.masterpolicyno from multicontract m
where m.category=3
and m.issuedate = m.issuedate
but it think i must use "having" and "in" but i can't figure it out.
Any help?
Thanks.
For a long running stored procedure, how can I determine the SQL statement within the stored procedure that is currently running?
The Activity Monitor only shows the name of the stored procedure and whether it is a SELECT/INSERT/UPDATE, never the complete statement.
Thank you.
In one of my packages, I am trying to create functionality that is similar to the fuzzy grouping transformation in that it takes a set of records and returns a subset of unique records. However, rather than fuzzy-matching columns which creates significant overhead, I just want to compare columns exactly, similar to how the lookup transformation works. At this point, data has already been fuzzy unique/duplicate seperated, this step is to only keep one record for each exactly similar dupe for an alias table.
At the moment, I am doing this (with lack of scalability foresight) with a fuzzy grouping transformation with all columns set to exact except for one which is set to fuzzy with a minimum similarity of 0.99. While this worked during development when I was testing with a small subset of data, it is unreasonable for the ~5mil records of production data it needs to operate on.
I am sure there is an efficient way to do this. I have thought about using a lookup transformation or combinations thereof, but I have not come to a definite solution yet.
Does anyone have any experience doing something similar to what I am trying or have any suggestions/ideas/questions/etc? Any help will be greatly appreciated.
Hello All,
I'm looking for a TSQL function or technique that when provided a date time as string and also a format, it must return a valid tsql datetime object/variable.
for example somethig like
GetDateTime('20071010', 'YYYYMMDD') or GetDateTime('10/10/2008', 'MM/DD/YYYY')
Essentially I want to get away from Implicit conversion from string to datetime. I want better control over this to ensure we dont run into any issues when our code runs on systems configured to be on various cultures.
I can even live with a few fixed formats and not being able to support arbitrary formats.
Any help/ideas/advise will be appreciated.
Regards,Avinash
Hi all,
i have an insert function using stored procedure with parameters. At some point while assigning parameters i make a casting problem but all i get is:
String was not recognized as a valid Boolean.
how can i find the exact line causing the error?
thank you
-shane
I am not sure how to go about doing this. I have a record that has a start time of 1 am and a stop time of 9pm (same day for simplicity) and I want to know how many hours during a peek time and how many were not.
For example, the application starts and inserts into the data base the start time of 1am and then the user stops the app at 9pm. Lets say the peek hours are 1pm to 7pm. I know i can do a date diff function to get how long the app ran for but how can I get the amount of hours it ran during the peek time? I know there has to be some mathematical solution to this but it is escaping me at the moment. I want to do this over many records so a a cte or pivot table is the end solution for performance.
How to search a string from the given values.
i want to search a string "Session" from the given column of results..
it is separator by comma.
i want only 2 results from the given value...
if i'm writing as like keyword it will return 4 but i need only the exact match of string..
_______________________
The Result should be
Session,Study
Patterns, session, asp.net
_______________________
But the Result is coming as
Session study, usercontrol
Session, study
Technical Session, Asp.net
Patterns, session, asp.net
________________________
anyone tell the solution
books catalog, education, best books
Birthday, Party Gopi
Session study, usercontrol
Session, study
Holiday
Technical Session, Asp.net
Patterns, session, asp.net
day, party
events for Lords, daily thing
events manager
events things
meeting, administrator
marriage
project ,event, demo
madurai ,event
demo, event calendar
rangoli, event
Demo Project
event project
I want to create an exact copy of a system running SQL 2000.
I want to copy MDF and LDF, but I cannot bring server down cause it works 24x7. What can I do?
Dear All
can any one help me to determine the exact size of existing row contain data type : varchar ?
thanks
I am very early on in developing a website to track issues with projects which is tied to a SQL database. I have my Projects Table, my Users Table, and am creating a third table to track issues. I'm wondering what is the best way to assign specific users to specific data/projects. The user should only be able to view & update the projects assigned to him. He should not be able to see other projects. What is the best way to assign projects/data to the users to make sure they are only viewing their data?
View 1 Replies View RelatedHi can anybody give me a simple example to check exact match word using sql sever
Ex: my word is like this : welcome to sql sever2005
Now i want to find server how it is possible?
I tried like this
select * from test where content like %server% . but is gives me possible result. But i dont want like this if i have an exact match with that key word then only i want possitive result.
Actually there is no word with server, i'm having only server2005 . So how can I get it?
Thank you
I need to know the exact upper limit of the Integer Data Type in SQL Server 2005Thanks
View 3 Replies View RelatedHi,
This is strange....
I am getting my source data from another system am storing the SaleAmount of each product in a field the data type of which is [decimal](12, 2).
For some products I am getting an exact match (upto 2 decimal places) as compared with my source data BUT for some other products the value before the decimal places is correct but the 2 digits after the decimal place does not match with the source data :confused:
Even if this sounds stupid, can you please guide me. Am i missing some very basic and common sense thing?
Many TIA.
I want to be sure that the SP3a ghas been applied
View 2 Replies View RelatedI have a report that displays many duplicate rows where all fields in several rows are exact duplicates. I would like to know how to make it so that the entire row does not show up if it is an exact duplicate of another row. Any ideas? Thanks.
View 8 Replies View Related