I created a query that originally started out with me creating four tables, and then adding temp tables below them. I attempted to add another temp table at the end, but it isn't yielding any information. I discovered the information I am attempting to retrieve is archived to different tables, therefore I will need to first retrieve all the data within the archived tables, and then add that to the query I originally wrote. I'm running into difficulty trying to figure out the best way to add this new portion to my query.
I've added the code below to show what I have so far. First issue I know I have is I am not connecting both parts therefore when the query runs, I get two results. I have to union multiple tables together in order to retrieve all of the results I want for the data range I have set. Here's the code. Towards the bottom, table #TMP3C is only bringing back NULL values, and that's because I am using the current equip base table and none of the archived tables. Should I add the new code to the bottom of my current code?
IF OBJECT_ID('TEMPDB..#TMP1CE') IS NOT NULL DROP TABLE #TMP1CE
IF OBJECT_ID('TEMPDB..#TMPCSGACCT1') IS NOT NULL DROP TABLE #TMPCSGACCT1
IF OBJECT_ID('TEMPDB..#TMPCSGACCT2') IS NOT NULL DROP TABLE #TMPCSGACCT2
IF OBJECT_ID('TEMPDB..#TMPCSGACCT3') IS NOT NULL DROP TABLE #TMPCSGACCT3
IF OBJECT_ID('TEMPDB..#TMPCSGACCT4') IS NOT NULL DROP TABLE #TMPCSGACCT4
I have a simple Control Flow setup that checks to see if a particular table exists. If the table does not exists, the table is created in an alternate path, if it does exist, the table is truncated before moving to a file import Data Flow that uses an OLE DB Destination to output the imported data.
My problem is, that I get OLE DB package errors if the table the OLE DB Destination Container references does not exist when I load the package.
How can I over come this issue? I need to be able to dynamically create the table in an earlier step, then use that table to import data into in a later step in the workflow.
Is there a switch I can use to turn off checking in the OLE DB Destination Container so that it will allow me to hook up the table creation step?
Seems like this would be a common task...
Steps:
1. Execute SQL Task to see if the required table exists 2. Use expresions to test a variable to check the results of step 1 3. If table exists, truncate the table and reload it from file in Data Flow using OLE DB Destination 4. If table does not exist, 1st create it, then follow the normal Data Flow
For reasons that are not relevant (though I explain them below *), Iwant, for all my users whatever privelige level, an SP which createsand inserts into a temporary table and then another SP which reads anddrops the same temporary table.My users are not able to create dbo tables (eg dbo.tblTest), but arepermitted to create tables under their own user (eg MyUser.tblTest). Ihave found that I can achieve my aim by using code like this . . .SET @SQL = 'CREATE TABLE ' + @MyUserName + '.' + 'tblTest(tstIDDATETIME)'EXEC (@SQL)SET @SQL = 'INSERT INTO ' + @MyUserName + '.' + 'tblTest(tstID) VALUES(GETDATE())'EXEC (@SQL)This becomes exceptionally cumbersome for the complex INSERT & SELECTcode. I'm looking for a simpler way.Simplified down, I am looking for something like this . . .CREATE PROCEDURE dbo.TestInsert ASCREATE TABLE tblTest(tstID DATETIME)INSERT INTO tblTest(tstID) VALUES(GETDATE())GOCREATE PROCEDURE dbo.TestSelect ASSELECT * FROM tblTestDROP TABLE tblTestIn the above example, if the SPs are owned by dbo (as above), CREATETABLE & DROP TABLE use MyUser.tblTest while INSERT & SELECT usedbo.tblTest.If the SPs are owned by the user (eg MyUser.TestInsert), it workscorrectly (MyUser.tblTest is used throughout) but I would have to havea pair of SPs for each user.* I have MS Access ADP front end linked to a SQL Server database. Forreports with complex datasets, it times out. Therefore it suit mypurposes to create a temporary table first and then to open the reportbased on that temporary table.
I have a text file which needs to be created into a table (let's call it DataFile table). For now I'm just doing the manual DTS to import the txt into SQL server to create the table, which works. But here's my problem....
I need to extract data from DataFile table, here's my query:
select * from dbo.DataFile where DF_SC_Case_Nbr not like '0000%';
Then I need to create a new table for the extracted data, let's call it ExtractedDataFile. But I don't know how to create a new table and insert the data I selected above into the new one.
Also, can the extraction and the creation of new table be done in just one stored procedure? or is there any other way of doing all this (including the importation of the text file)?
i am inserting something into the temp table even without creating it before. But this does not give any compilation error. Only when I want to execute the stored procedure I get the error message that there is an invalid temp table. Should this not result in a compilation error rather during the execution time.?
--create the procedure and insert into the temp table without creating it. --no compilation error. CREATE PROC testTemp AS BEGIN INSERT INTO #tmp(dt) SELECT GETDATE() END
only on calling the proc does this give an execution error
I have SQL Server Management Studio Express (SSMS Express) and SQL Server 2005 Express (SS Express) installed in my Windows XP Pro PC that is on Microsoft Windows NT 4 LAN System. My Computer Administrator grants me the Administror Privilege to use my PC. I tried to use SQLQuery.sql (see the code below) to create a table "LabResults" and insert 20 data (values) into the table. I got Error Messages 102 and 156 when I did "Parse" or "Execute". This is my first time to apply the data type 'decimal' and the "VALUES" into the table. I do not know what is wrong with the 'decimal' and how to add the "VALUES": (1) Do I put the precision and scale of the decimal wrong? (2) Do I have to use "GO" after each "VALUES"? Please help and advise.
Thanks in advance,
Scott Chang
///////////--SQLQueryCroomLabData.sql--/////////////////////////// USE MyDatabase GO CREATE TABLE dbo.LabResults (SampleID int PRIMARY KEY NOT NULL, SampleName varchar(25) NOT NULL, AnalyteName varchar(25) NOT NULL, Concentration decimal(6.2) NULL) GO --Inserting data into a table INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration) VALUES (1, 'MW2', 'Acetone', 1.00) VALUES (2, 'MW2', 'Dichloroethene', 1.00) VALUES (3, 'MW2', 'Trichloroethene', 20.00) VALUES (4, 'MW2', 'Chloroform', 1.00) VALUES (5, 'MW2', 'Methylene Chloride', 1.00) VALUES (6, 'MW6S', 'Acetone', 1.00) VALUES (7, 'MW6S', 'Dichloroethene', 1.00) VALUES (8, 'MW6S', 'Trichloroethene', 1.00) VALUES (9, 'MW6S', 'Chloroform', 1.00) VALUES (10, 'MW6S', 'Methylene Chloride', 1.00 VALUES (11, 'MW7', 'Acetone', 1.00) VALUES (12, 'MW7', 'Dichloroethene', 1.00) VALUES (13, 'MW7', 'Trichloroethene', 1.00) VALUES (14, 'MW7', 'Chloroform', 1.00) VALUES (15, 'MW7', 'Methylene Chloride', 1.00 VALUES (16, 'TripBlank', 'Acetone', 1.00) VALUES (17, 'TripBlank', 'Dichloroethene', 1.00) VALUES (18, 'TripBlank', 'Trichloroethene', 1.00) VALUES (19, 'TripBlank', 'Chloroform', 0.76) VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51) GO //////////Parse/////////// Msg 102, Level 15, State 1, Line 5 Incorrect syntax near '6.2'. Msg 156, Level 15, State 1, Line 4 Incorrect syntax near the keyword 'VALUES'. ////////////////Execute//////////////////// Msg 102, Level 15, State 1, Line 5 Incorrect syntax near '6.2'. Msg 156, Level 15, State 1, Line 4 Incorrect syntax near the keyword 'VALUES'.
I’ve got a situation where the columns in a table we’re grabbing from a source database keep changing as we need more information from that database. As new columns are added to the source table, I would like to dynamically look for those new columns and add them to our local database’s schema if new ones exist. We’re dropping and creating our target db table each time right now based on a pre-defined known schema, but what we really want is to drop and recreate it based on a dynamic schema, and then import all of the records from the source table to ours.It looks like a starting point might be EXEC sp_columns_rowset 'tablename' and then creating some kind of dynamic SQL statement based on that. However, I'm hoping someone might have a resource that already handles this that they might be able to steer me towards.Sincerely, Bryan Ax
I would like to create a procedure which create views by taking parameters the table name and a field value (@Dist).
However I still receive the must declare the scalar variable "@Dist" error message although I use .sp_executesql for executing the particularized query.
Below code.
ALTER Procedure [dbo].[sp_ViewCreate] /* Input Parameters */ @TableName Varchar(20), @Dist Varchar(20) AS Declare @SQLQuery AS NVarchar(4000) Declare @ParamDefinition AS NVarchar(2000)
convert my table(like picture) to hierarchical structure in SQL. actually i want to make a table from my data in SQL for a TreeList control datasource in VB.net application directly.
ProjectID is 1st Parent Type_1 is 2nd Parent Type_2 is 3rd Parent Type_3 is 4ed Parent
Hi all, please help. I m trying to create an "empty" table from existing table for the audit trigger purpose. For now, i am trying to create an empty audit table for every table in a database named "pubs", and it's seem won't work. Please advise.. Thanks in advance.
SELECT @TABLE_NAME= MIN(TABLE_NAME) FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_TYPE= 'BASE TABLE' AND TABLE_NAME NOT LIKE 'audit%' AND TABLE_NAME!= 'sysdiagrams' AND TABLE_NAME!= 'Audit' AND TABLE_NAME = 'sales'
WHILE @TABLE_NAME IS NOT NULL BEGIN
SELECT @TABLE_NAME= MIN(TABLE_NAME) FROM INFORMATION_SCHEMA.Tables WHERE TABLE_NAME> @TABLE_NAME AND TABLE_NAME = 'sales'
SELECT @TABLE_NAME= MIN(TABLE_NAME) FROM INFORMATION_SCHEMA.Tables WHERE TABLE_NAME> @TABLE_NAME AND TABLE_TYPE= 'BASE TABLE' AND TABLE_NAME!= 'sysdiagrams' AND TABLE_NAME!= 'Audit' AND TABLE_NAME NOT LIKE 'audit%'
I am trying to create a new mining structure with case table and nested table, the case table (fact table) has alread defined the relationships with the nested table(dimension table), and I can see their relationship from the data source view. But why the wizard for creating the new mining structure showed that message? Why is that? And what could I try to fix it?
Hope it is clear for your help.
Thanks a lot for your kind advices and I am looking forward to hearing from you shortly.
I'd like to create a temporary table with the same schema as an exiting table. How can I do this without hard coding the column definitions into the temporary table definition?
I'd like to do something like:
CREATE TABLE #tempTable LIKE anotherTable
..instead of...
CREATE TABLE #tempTable (id INT PRIMARY KEY, created DATETIME NULL etc...
my stored procedure have one table variable (@t_Replenishment_Rpt).I want to create an Index on this table variable.please advise any of them in this loop... below is my table variable and I need to create 3 indexes on this...
which one is smarter, where there is no indexing on the table which is really simple table delete everything or recreate table. I got an argument with one of my coworker. He says it doesnt matter i say do delete. Any opinions.
i have 6 table in SQL Server and i have created one view and create single table by linking all the table,now i want to join two column like
Column A and Column B = Column C e.g A B C Atul Jadhav Atuljadhav Vijay vijayvijay
in above exambe column A having firstName and Column B having second name and i want to join this two column in C column "atuljadhav" and if column B is blank then it join A value tow timestriger code as it is auto update column and every time (update, append, modify, delete) it should be update automatic
In my data modell I have defined the 2 tables "Person" and "Category":
Table "Person" ---------------- [PersonID] [int] IDENTITY(1,1) NOT NULL [CategoryID] [int] NOT NULL [FirstName] [nvarchar](50) [LastName] [nvarchar](50)
Table "Category" ---------------- [CategoryID] [int] IDENTITY(1,1) NOT NULL [CategoryName] [nvarchar](50)
Now I like to read my first row from the source and lookup a value for the CategoryID "sailing". As my data tables are empty right now, the lookup is not able to read a value for "sailing". Now I like to insert a new row in the table "Category" for the value "sailing" and receive the new "CategoryID" to insert my values in the table "Person" INCLUDING the new "CategoryID".
I think this is a normal way of reading data from a source and performing some lookups. In my "real world" scenario I have to lookup about 20 foreign keys before I'm able to insert the row read from the flat file source.
I really can't belief that this is a "special" case and I also can't belief that there is no easy and simple way to solve this with SSIS. Ok, the solution from Thomas is working but it is a very complex solution for this small problem. So, any help would be appreciated...
select * into dbo.ashutosh from attribute where 1=2
"USE WHERE 1=2 TO AVOID COPYING OF DATA"
//HERE "ASHUTOSH" IS THE NEW TABLE NAME AND "ATTRIBUTE" IS THE TABLE WHOSE REFERENCE IS USED// //the logic is to use where clause with 1=2 which will never be true and hence it will not return any row//
Row 1 with identity 1 has rolled over to new quarter row 4 with identity 4 ( qtr fields are changed ) Row 2 with identity 2 has rolled over to new quarter row 5 with identity 5. Same with last row as well.
Here, i have another table called "ident_map" with columns like (old identity, new identity ) and during rollover i am supposed to load ident_map table with old and new identity. So after rollover is complete, ident_map table should look like
1,4 2,5 3,6
I know using output clause I can capture the new identity values. 4,5,6 in this case. But is there any way to capture both old identity and new identity during rollover so that i can load the ident_map table with old and new identity.
I have 2 identical tables one contains current settings, the other contains all historical settings.I could create a union view to display the current values from table A and all historical values from table B, butthat would also require a Variable to hold the tblid for both select statements.
Q. Can this be done with one joined or conditional select statement?
DECLARE @tblid int = 501 SELECT 1,2,3,4,'CurrentSetting' FROM TableA ta WHERE tblid = @tblid UNION SELECT 1,2,3,4,'PreviosSetting' FROM Tableb tb WHERE tblid = @tblid
Hi I'm trying to Create a new Table from existing table in Q/Analyzer. I figured it would be something like this: CREATE TABLE newTable AS(SELECT * FROM OldTable); but i keep getting Server: Msg 156, Level 15, State 1, Line 1Incorrect syntax near the keyword 'AS'. also.. is there another method of doing this, something like INSERT INTO newTable(SELECT * FROM OldTable); and it creates the table ( newTable ) for u if it doenst already exist?? Cheers!!! im using sql2000
Hi All, I am using SQl server studio management to create table. How to set two attributes as a primary key: composite key. like ( proj_id, emp id) both as primary key. How to specify the forign key constraint. using alter table Please give me the example: don't syntax which msdn gives.
ok suppose i want to create a table with a user specified name...... how should i replace the name with the variable name="table1" Dim condb string ....... Dim cmdDB2 As SqlCommand Dim name as string=("table1") Dim selkta As String = "CREATE TABLE name(no int,quest text,op1 text)" cmdDB2 = New SqlClient.SqlCommand(selkta, conDB) conDB.Open() cmdDB2.ExecuteNonQuery() conDB.Close()thank u
I am new to SQL and i am trying to create a table from a table. below is my query but im getting an error
CREATE TABLE Production.TransactionHistoryArchive1 AS (SELECT ProductID,SUM(Quantity) QuantitySum,SUM(LineItemTotalCost) TotalCostByID FROM Production.TransactionHistoryArchive GROUP BY ProductID)
error: Msg 156, Level 15, State 1, Line 1 Incorrect syntax near the keyword 'AS'.
Hi All I want to create new table which is going to be a copy of one existing table. I need to copy the existing data into the new table too. How do I do that?
I'm trying to create a proc for granting permission for developer, but I tried many times, still couldn't get successful, someone can help me? The original statement is:
