I have large stored procedures in SQL Server 2005 that often get updated. Sometimes it is very difficult to recognize how one change could impact the overall results. I would like to have some sample input that I could test during changes and see it compare the data results before & after my changes. This would help me quickly identify if the results are fine to pass through.
So basically I would like an easy way to compare the results of 2 stored procedures. Any suggestions or utilites that would help me do this?
I have large stored procedures in SQL Server 2005 that often get updated. Sometimes it is very difficult to recognize how one change could impact the overall results. I would like to have some sample input that I could test during changes and see it compare the data results before & after my changes. This would help me quickly identify if the results are fine to pass through.
So basically I would like an easy way to compare the results of 2 stored procedures. Any suggestions or utilites that would help me do this?
HiI have a problem trying to compare a string value in a WHERE statement. Below is the sql statement. ALTER PROCEDURE dbo.StoredProcedure1(@oby char,@Area char,@Startrow INT,@Maxrow INT, @Minp INT,@Maxp INT,@Bed INT )
ASSELECT * FROM ( SELECT row_number() OVER (ORDER BY @oby DESC) AS rownum,Ref,Price,Area,Town,BedFROM [Houses] WHERE ([Price] >= @Minp) AND ([Price] <= @Maxp) AND ([Bed] >= @Bed) AND ([Area] = @Area)) AS AWHERE A.rownum BETWEEN (@Startrow) AND (@Startrow + @Maxrow) The problem is the Area variable if i enter it manually it works if i try and pass the variable in it doesn't work. If i change ([Area] = @Area) to ([Area] = 'The First Area') it is fine. The only problem i see is that the @Area has spaces, but i even tried passing 'The First Area' with the quotes and it still didnt work.Please help, its got to be something simple.Thanks In Advance
Basically I have two strings. Both strings will contain similar data because the 2nd string is the first string after an update of the first string takes place. Both strings are returned in my Stored Procedure For example:String1 = "Here is some data. lets type some more data"String2 = "Here's some data. Lets type some data here"I would want to change string2 (inside my Stored Procedure) to show the changed/added text highlighted and the deleted text with a strike though. So I would want string2 to look like thisstring2 = "Here<font color = "#00FF00">'s</font> <strike>is</strike> some data. <font color = "#00FF00">L</font>ets type some <strike>more</strike> data <font color = "#00FF00">here</font>" Is there an way to accomplish this inside a stored procedure?
Seems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID, S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName', T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID FROM [Item].ItemDetails I INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID FROM [Item].ItemDetails IOr something like that... Any thoughts?
I have written a utility that checks our stored procedures forpotentially incorrect code (eg = null as opposed to is null, unusedvariables/parameters etc). It also ensures that parameters/variablesetc match our naming conventions and data types/sizes are the sames asthe corresponding type in the database (if appropriate)Are there any other utilities that do this sort of thing?
Hi, How can I store a stored procedure's results(returning dataset) intoa table?Bob*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
datagrid. Sorry, I'm new to it. For the few times I've done datagrids in the past, I've built my own selects and filled the grid. This time I need to use someone elses stored procedure. I simply don't know how to get the results back into my VB datagrid. Can someone point me in the right direction? Thanks.
I am trying to execute a stored procedure (which returns multiple tables) and use these results to populate an Excel file. I am totally lost on how to capture the results and use it. Any help will be appreciated.
Is there a way to create a query which compares two result sets of results? for example the result set of my first select statement is 7,1,8 and the second result set is 7,1,9..is there a query wherein i can compare the two results? i just wanted to reveal that there is a diffrence between the two..
Hi,I'm creating a stored procedure that pulls information from 4 tables based on 1 parameter. This should be very straightforward, but for some reason it doesn't work.Given below are the relevant tables: SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO SET ANSI_PADDING ON GO CREATE TABLE [dbo].[tbl_Project]( [ProjID] [varchar](300) NOT NULL, [ProjType] [varchar](20) NULL, [ProjectTitle] [varchar](max) NULL, [ProjectDetails] [varchar](max) NULL, [ProjectManagerID] [int] NULL, [RequestedBy] [varchar](max) NULL, [DateRequested] [datetime] NULL, [DueDate] [datetime] NULL, [ProjectStatusID] [int] NULL, CONSTRAINT [PK__tbl_Project__0B91BA14] PRIMARY KEY CLUSTERED ( [ProjID] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY]
GO SET ANSI_PADDING OFF GO ALTER TABLE [dbo].[tbl_Project] WITH CHECK ADD CONSTRAINT [FK_tbl_Project_tbl_ProjectManager] FOREIGN KEY([ProjectManagerID]) REFERENCES [dbo].[tbl_ProjectManager] ([ProjectManagerID]) GO ALTER TABLE [dbo].[tbl_Project] CHECK CONSTRAINT [FK_tbl_Project_tbl_ProjectManager] GO ALTER TABLE [dbo].[tbl_Project] WITH CHECK ADD CONSTRAINT [FK_tbl_Project_tbl_ProjectStatus] FOREIGN KEY([ProjectStatusID]) REFERENCES [dbo].[tbl_ProjectStatus] ([ProjectStatusID]) GO ALTER TABLE [dbo].[tbl_Project] CHECK CONSTRAINT [FK_tbl_Project_tbl_ProjectStatus]
SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO SET ANSI_PADDING ON GO CREATE TABLE [dbo].[tbl_Report]( [ReportName] [varchar](50) NOT NULL, [ProjID] [varchar](300) NULL, [DeptCode] [varchar](50) NULL, [ProjType] [varchar](50) NULL, [ProjectTitle] [varchar](500) NULL, [ProjectDetails] [varchar](3000) NULL, [ProjectManagerID] [int] NULL, [RequestedBy] [varchar](50) NULL, [DateRequested] [datetime] NULL, [DueDate] [datetime] NULL, [ProjectStatusID] [int] NULL, CONSTRAINT [PK_tbl_Report] PRIMARY KEY CLUSTERED ( [ReportName] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY]
GO SET ANSI_PADDING OFF GO ALTER TABLE [dbo].[tbl_Report] WITH CHECK ADD CONSTRAINT [FK_tbl_Report_tbl_ProjectManager] FOREIGN KEY([ProjectManagerID]) REFERENCES [dbo].[tbl_ProjectManager] ([ProjectManagerID]) GO ALTER TABLE [dbo].[tbl_Report] CHECK CONSTRAINT [FK_tbl_Report_tbl_ProjectManager] GO ALTER TABLE [dbo].[tbl_Report] WITH CHECK ADD CONSTRAINT [FK_tbl_Report_tbl_ProjectStatus] FOREIGN KEY([ProjectStatusID]) REFERENCES [dbo].[tbl_ProjectStatus] ([ProjectStatusID]) GO ALTER TABLE [dbo].[tbl_Report] CHECK CONSTRAINT [FK_tbl_Report_tbl_ProjectStatus]
SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO SET ANSI_PADDING ON GO CREATE TABLE [dbo].[tbl_ProjectStatus]( [ProjectStatusID] [int] IDENTITY(1,1) NOT NULL, [ProjectStatus] [varchar](max) NULL, CONSTRAINT [PK__tbl_ProjectStatu__023D5A04] PRIMARY KEY CLUSTERED ( [ProjectStatusID] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY]
SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO SET ANSI_PADDING ON GO CREATE TABLE [dbo].[tbl_ProjectManager]( [ProjectManagerID] [int] IDENTITY(1,1) NOT NULL, [FName] [varchar](50) NULL, [LName] [varchar](50) NULL, [Inactive] [int] NULL, CONSTRAINT [PK__tbl_ProjectManag__7D78A4E7] PRIMARY KEY CLUSTERED ( [ProjectManagerID] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY]
GO SET ANSI_PADDING OFF
And here is the stored procedure that I wrote (doesn't return results): SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER PROCEDURE [dbo].[GetReportQuery] ( @ReportName varchar(100) )
AS
BEGIN
SET NOCOUNT ON
IF @ReportName IS NULL BEGIN RETURN -1 END ELSE BEGIN
DECLARE @DeptCode varchar(50), @ProjID varchar(50) SELECT @DeptCode = DeptCode FROM tbl_Report WHERE ReportName = @ReportName
SET @ProjID = @DeptCode + '-' + '%'
SELECT P.ProjID, P.ProjType, P.ProjectTitle, P.ProjectDetails, M.FName, M.LName, P.DateRequested, P.DueDate, S.ProjectStatus FROM tbl_Project P, tbl_ProjectManager M, tbl_ProjectStatus S WHERE ((P.ProjID = (SELECT ProjID FROM tbl_Report WHERE ((ReportName = @ReportName)))) AND (P.ProjectDetails = (SELECT ProjectDetails FROM tbl_Report WHERE ReportName = @ReportName) OR P.ProjectDetails IS NULL) AND (M.FName = (SELECT FName FROM tbl_ProjectManager WHERE (ProjectManagerID = (SELECT ProjectManagerID FROM tbl_Report WHERE ReportName = @ReportName))) OR M.FName IS NULL) AND (M.LName = (SELECT LName FROM tbl_ProjectManager WHERE (ProjectManagerID = (SELECT ProjectManagerID FROM tbl_Report WHERE ReportName = @ReportName))) OR M.LName IS NULL) AND (P.DateRequested = (SELECT DateRequested FROM tbl_Report WHERE ReportName = @ReportName) OR P.DateRequested IS NULL) AND (P.DueDate = (SELECT DueDate FROM tbl_Report WHERE ReportName = @ReportName) OR P.DueDate IS NULL) AND (S.ProjectStatus = (SELECT ProjectStatusID FROM tbl_Report WHERE ReportName = @ReportName) OR S.ProjectStatus IS NULL) ) END
I am having trouble getting data back from my stored procedure insert commands. Here is what I currently have set up. 1 - A dataset called YagDag 2 - A Table adapter called tadUsers 3 - A Stored Procedure that the tadUsers uses to insert called spUser_i It seems like the way I have my VB code set up I can only retrieve a return int. I can't figure out how to get my User GUID back, any help would be really appreciated Public Shared Function AddUser(ByVal EMail As String, ByVal FirstName As String, ByVal LastName As String, ByVal Password As String, ByVal EMailActive As Boolean) As Integer Dim strEMail = AppFunction.SQLSafeString(EMail) Dim strFirstName = AppFunction.SQLSafeString(FirstName) Dim strLastName = AppFunction.SQLSafeString(LastName) Dim strPassword = AppFunction.SQLSafeString(Password) Dim blnEMailActive = EMailActive
Dim Users As New YagDagTableAdapters.tadUsers
Dim guidUserYID As Guid = Users.Insert(strFirstName, strLastName, strPassword)
Return 1 End Function -- ============================================= -- Author:Greg Moser -- Create date: 3/29/2008 -- Description:Adds a User to the tblUser -- ============================================= ALTER PROCEDURE [dbo].[spUser_i] @FirstName varchar(50), @LastName varchar(50), @Password varchar(16) AS BEGIN SET NOCOUNT ON;
DECLARE @UserYID uniqueidentifier SET @UserYID = NEWID()
-- Add User to tblUsers INSERT INTO tblUsers ( YID, Password, FirstName, LastName ) VALUES ( @UserYID, @Password, @FirstName, @LastName )
Hi, Is there a way I can display the data returned from more than one stored procedure in a report using reporting services. Or can I use more than one dataset in the report????
I wrote a stored procedure with three variables to be passed as input parameters. The stored procedure runs a select into statement into a temp table. The resulting temp table with another table was queried using right outer join to produce the desired results. The stored procedure compiles error free.However when I ran the stored procedure with the parameters(3) in ISQL/W (SQL Server 6.5) the headers(column-names) were displayed but no records. When runned as a query with the same parameter values, records were produced. Help please urgent.
I'm testing some code to look up values from my database and update a specific field when certain conditions are met. I'm having trouble with some code that is giving me the results I expect when I submit one set of parameters, but is not finding anything in the database for another set, when I know the data exists.
I put the response.write statements and loops in so I could verify the functionality.
Here's what it produces:
out 452 ret 453 origin 7/29/2006 8:00:00 AM return 7/29/2006 12:05:00 PM OFNO 109 450
Here's what it should produce:
out 452 ret 453 origin 7/29/2006 8:00:00 AM return 7/29/2006 12:05:00 PM OFNO 109 450 RFNO 110 451
If I do this in query analyzer:
Code:
select flightid, flightno, departuretime from flightschedules where flightid > 449 and flightid < 454
this is what I get from the database:
flightid flightno departuretime origin destination 4521092006-07-29 08:00:00 A C 4501092006-07-29 08:00:00 A B 4531102006-07-29 12:05:00 C A 4511102006-07-29 13:15:00 B A
What I'm trying to do is look up the chosen flight, then find the flight with the matching origin/destination (the other flight leg) on the same day.
I can't figure out why it's working for one set of parameters and not for the other.
I'm trying to write a nested stored procedure, with the outer proc named "spAssociate", and inner proc named "spSales".
So far I have created the inner proc
CREATE PROCEDURE spSales@userID intASSET NOCOUNT ON SELECT SalesOppID FROM Sales_Opportunities WHERE SalesOppCurrentStatus NOT IN ('Sale Lost','Sales Closed','Sale Closed','Unqualified','Deferred','Dropped') AND OppOwnerUserID = @userIDGO
This was successfully created. I wanted to use the return set in the outer proc, which I tried creating as:
CREATE PROCEDURE spAssociate(@userID int, @containerType varchar(100), @associateType varchar(100))AS SET NOCOUNT ON SELECT AssociateID FROM AppRelations WHERE ContainerType=@containerType AND ContainerID IN (EXECUTE spSales @userID) AND AssociateType=@associateType GO
I get an error "incorrect syntax near execute".
How can I use the results from the inner proc for the WHERE condition in my outer proc?
I'm sure this is an obvious question but much of SQL is new to me.I have a stored procedure and I want to use the results of a selectstatement elsewhere in the stored prcedure. The select statement willreturn at most one record and only one column, here's an example :select top 1 Sequence from MyTablewhere ParentId=4 and Sequence > 200 order by sequenceCan I put this result in a variable? Do I have to use SELECT INTOTempTable and refer to TempTable and then drop the table at the end ofthe stored procedure? I have read a little about cursors, are thesethe way to go?I'm confused as to what my options are, any help or links to help willbe appreciated.Thanks for reading.
Hi,I created a VB SQL CRL Stored procedure for calculating a value. Valueis returned as belowUsing sConn4 As New SqlConnection("context connection=true")sConn4.Open()scmd = New SqlCommand("SELECT " & var_max, sConn4)sdrd = scmd.ExecuteReader()SqlContext.Pipe.Send(sdrd)End UsingWhen calling this stored procedure from a TSQL stored procedure forusing the value for further processing the value returned to myvariable is 0. The correct value should be 56. In results tab I get thecorrect result, but how can I assign it to my variable @max ?DECLARE @max1 intDECLARE @max intEXEC @max1 = [dbo].[VBSTP_calculate_MAX_no]@vsp_table_name = N'[dbo].[Message]',@vsp_table_key = N'message_no',@vsp_WHERE = N''print @max1 -- value here is 0SET @max = (SELECT @max1)Thanks a lot.
I need to return the results of a stored procedure into a temporary table. Something like this:
Select * into #temp from exec (the stored procedure). It appears that I can not do this.
The following will not work for me cause I am not sure how many columns will be returned. I want this to work even if the calling stored procedure is changed (i.e add or take away columns)
If I have multiple selects statements in one stored procedure. How do I access the different results in a report in Reporting Services? Where the first select is the detail lines of my report and the second select is just a field for a my header? Or am I going about this wrong with putting it all the results I want into one stored procedure for one report?
Example stored procedure:
ALTER PROCEDURE [dbo].[proc_DepositsByOfficer]
As
SELECT MASTER_DSC.APP
, MASTER_DSC.BRANCH
, qlkpOfficer.strName
, MASTER_DSC.DSC_OFFICER_49
, qlkpBranchName.strDescrS
, MASTER_DSC.DSC_CUR_BAL_21
, Case MASTER_DSC.APP WHEN 1 Then DSC_CUR_BAL_21 End AS DDA_BAL
, Case MASTER_DSC.APP WHEN 2 Then DSC_CUR_BAL_21 End AS SAV_BAL
, Case MASTER_DSC.APP WHEN 3 Then DSC_CUR_BAL_21 End AS CD_BAL
, MASTER_DSC.DSC_INT_RATE_45
, Case When [DSC_CUR_BAL_21]>0 Then ([DSC_CUR_BAL_21]*[DSC_INT_RATE_45])/100 Else 0 End As ANN_EXP
, Case When [DSC_CUR_BAL_21]>0 And MASTER_DSC.APP=1 Then ([DSC_CUR_BAL_21]*[DSC_INT_RATE_45])/100 Else 0 End AS ANN_EXP_DDA
, Case When [DSC_CUR_BAL_21]>0 And MASTER_DSC.APP=2 Then ([DSC_CUR_BAL_21]*[DSC_INT_RATE_45])/100 Else 0 End AS ANN_EXP_SAV
, Case When [DSC_CUR_BAL_21]>0 And MASTER_DSC.APP=3 Then ([DSC_CUR_BAL_21]*[DSC_INT_RATE_45])/100 Else 0 End AS ANN_EXP_CD
, Case MASTER_DSC.APP WHEN 1 Then 1 End AS DDA_Count
, Case MASTER_DSC.APP WHEN 2 Then 1 End AS SAV_Count
, Case MASTER_DSC.APP WHEN 3 Then 1 End AS CD_Count
, qlkpApplicationCode.strDescrS AS strApplCode
FROM
MASTER_DSC
INNER JOIN qlkpApplicationCode ON MASTER_DSC.APP=qlkpApplicationCode.dblReference
LEFT JOIN qlkpOfficer ON MASTER_DSC.DSC_OFFICER_49=qlkpOfficer.intID
LEFT JOIN qlkpBranchName ON MASTER_DSC.BRANCH=qlkpBranchName.dblReference
I thought I would impliment a new feature of my web page using stored procedures and the SqlDataSource object, for practice or whatever, since I don't normally use that stuff. This is the stored procedure:set ANSI_NULLS ON set QUOTED_IDENTIFIER ON go
ALTER PROCEDURE [dbo].[AppcheckContest] -- Add the parameters for the stored procedure here
@BeginDate datetime = '1/1/2006', @EndDate datetime = '12/31/2006', @SectionID int = 10, @WinnerID int = 0 OUTPUT AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
SELECT top 1 @WinnerID = P.UserID FROM cs_Posts P WHERE P.PostDate BETWEEN @BeginDate AND @EndDate AND P.SectionID = @SectionID AND P.UserID <> 2100 -- I don't want to win my own contest...
AND SettingsID = 1000 -- This number could be different if i had more than one CS installed?
AND IsApproved = 1 ORDER BY NEWID() -- yes this is slow, but it works...
RETURN @WinnerID END It's really simple - just needs to return the one randomly chosen integer userID. I've tested it in query designer or whatever it's called in Management Studio and it works fine there at least. Thinking I was done the hard part, I created a new web form in visual studio, dropped a SqlDataSource on it, and used the 'configure data source' wizard from the smart tag to do all the work for me. I didn't have any trouble using the wizard to select my stored procedure, and i'm using the sa connection string to simplify my debugging. I tried using the FormParameter / FormField way of getting the output and setting the input parameters. I can't seem to get it working though. There's no errors or anything, just the output isn't coming through. Here's the code from the aspx codebehind file:Partial Class Contest Inherits System.Web.UI.Page
Protected Sub btnSelectWinner_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnSelectWinner.Click Dim stuff As New System.Web.UI.DataSourceSelectArguments SqlDataSource1.Select(stuff) SqlDataSource1.DataBind() lblWinnerID.Text = SqlDataSource1.SelectParameters("WinnerID").ToString End Sub End Class As you can see, I wasn't sure if you're supposed to call databind() or select() to actually get the stored procedure to execute, so I tried both. I was hoping the last line of code there would set the label to the value contained in the @WinnerID parameter, but instead it sets it to "WinnerID". Here's the code from the .aspx file. Most of this was generated by the Wizard, but I messed around with it a bit. <%@ Page Language="VB" MasterPageFile="~/MasterPage.master" AutoEventWireup="false" CodeFile="Contest.aspx.vb" Inherits="Contest" title="Untitled Page" %> <asp:Content ID="Content1" ContentPlaceHolderID="CPHMain" Runat="Server"> <asp:Button ID="btnSelectWinner" runat="server" Text="Find Winner" /> <asp:Calendar ID="Calendar_From" runat="server"></asp:Calendar> <asp:Calendar ID="Calendar_To" runat="server"></asp:Calendar> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:appcheck-csConnectionString-sa %>" SelectCommand="AppcheckContest" SelectCommandType="StoredProcedure" CancelSelectOnNullParameter="False"> <SelectParameters> <asp:FormParameter FormField="Calendar_From" Name="BeginDate" Type="DateTime" /> <asp:FormParameter FormField="Calendar_To" Name="EndDate" Type="DateTime" /> <asp:Parameter DefaultValue="10" Name="SectionID" Type="Int32" /> <asp:formParameter FormField="lblWinnerID" defaultvalue="666" Direction="InputOutput" Name="WinnerID" Type="Int32" /> </SelectParameters> </asp:SqlDataSource>
Hello,I have written a stored procedure where I prompt the user for the Year and the Month (see below)How do I take the variable @TheMonth and find out how many days is in the month and then loop to display a total for every day in the selected month.Can someone please point me in the right direction. CREATE PROCEDURE crm_contact_frequency_report @TheYear varchar(4),@TheMonth varchar(2) AS SELECT /* EMAILS (B) */(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Email B ON A.subject = B.subject WHERE (YEAR(B.CreatedOn) = @TheYear) AND (MONTH(B.CreatedOn) = @TheMonth) AND (B.directioncode = 1)) AS Total_EmailOutgoing, (SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Email B ON A.subject = B.subject WHERE (YEAR(B.CreatedOn) = @TheYear) AND (MONTH(B.CreatedOn) = @TheMonth) AND (B.directioncode = 0)) AS Total_EmailImconing, (SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Email B ON A.subject = B.subject WHERE (YEAR(B.CreatedOn) = @TheYear) AND (MONTH(B.CreatedOn) = @TheMonth) AND (B.directioncode IS NULL)) AS Total_EmailNotListed, (SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Email B ON A.subject = B.subject WHERE (YEAR(B.CreatedOn) = @TheYear) AND (MONTH(B.CreatedOn) = @TheMonth)) AS Total_All_Emails, /* PHONE CALLS (C) */(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN PhoneCall C ON A.subject = C.subject WHERE (YEAR(C.CreatedOn) = @TheYear) AND (MONTH(C.CreatedOn) = @TheMonth) AND (C.directioncode = 1)) AS Total_CallOutgoing, (SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN PhoneCall C ON A.subject = C.subject WHERE (YEAR(C.CreatedOn) = @TheYear) AND (MONTH(C.CreatedOn) = @TheMonth) AND (C.directioncode = 0)) AS Total_CallIncoming, (SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN PhoneCall C ON A.subject = C.subject WHERE (YEAR(C.CreatedOn) = @TheYear) AND (MONTH(C.CreatedOn) = @TheMonth) AND (C.directioncode IS NULL)) AS Total_CallNotListed, (SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN PhoneCall C ON A.subject = C.subject WHERE (YEAR(C.CreatedOn) = @TheYear) AND (MONTH(C.CreatedOn) = @TheMonth)) AS Total_All_Calls, /* FAXES (D) */(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Fax D ON A.subject = D.subject WHERE (YEAR(D.CreatedOn) = @TheYear) AND (MONTH(D.CreatedOn) = @TheMonth) AND (D.directioncode = 1)) AS Total_FaxOutgoing, (SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Fax D ON A.subject = D.subject WHERE (YEAR(D.CreatedOn) = @TheYear) AND (MONTH(D.CreatedOn) = @TheMonth) AND (D.directioncode = 0)) AS Total_FaxIncoming, (SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Fax D ON A.subject = D.subject WHERE (YEAR(D.CreatedOn) = @TheYear) AND (MONTH(D.CreatedOn) = @TheMonth) AND (D.directioncode IS NULL)) AS Total_FaxNotListed, (SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Fax D ON A.subject = D.subject WHERE (YEAR(D.CreatedOn) = @TheYear) AND (MONTH(D.CreatedOn) = @TheMonth)) AS Total_All_Faxes FROM CampaignResponse AGO
Hi I've run into a slight problem with my stored procedure.If I fire a query in a stored procedure, how can I access the results of that query in the stored procedure itself ?? ALTER PROCEDURE GetDetailsOfWebsiteUserForMail @request_id intAS declare @k int select person_id from Website_user w, Request r where r.user_id=w.user_id and r.request_id=@request_id set @k =person_id /* What do I do here??, value returned is unique */ if (@k!=0) /* Exists */ begin /* do something */ end else /* entry on person table does not exist */ begin /* do something */ end
Hi, Can anyone tell me how to access the results from a select statement within the stored procedure?
This is to implement auditting functionality, before updating a record i want select the original record and compare the contents of each field with the varibles that are passed in, if the fields contents has changed i want to write an audit entry.
So i'd like to store the results of the select statement in a variable and access it like a dataset. e.g
declare selectResult
set selectResult = Select field1,field2,field3 from table1
if selectResult.field1 <> @field1 begin exec writeAudit @var1,@var2,var3 end
I ran my SP in QA and it brought back some data from my live database but I had my test DB selected from the DDL at the top of the screen. So i ran a Select statement on the whole table in a different query window (with the same parameters)and it gave me the correct info. Any idea y? They both should be bringing back information from the same table not one from my live DB and one from my TEST DB. Please help me--I'm so lost!min max rate <----This is what my stored procedure brought back(data from my live DB) ---it has parameters 90 100 .4080 89 .3070 79 .2559 69 .1549 58 .10The stored procedure is as follows: CREATE PROCEDURE dbo.sp_WageMatrix_GetRate( @CompanyID nvarchar(2), @FacilityID nvarchar(2))AS SET NOCOUNT ON;SELECT [Min], [Max], Rate FROM Performance.dbo.WageMatrix WHERE (CompanyID = @CompanyID) AND (FacilityID = @FacilityID) AND PeriodID = dbo.fn_GetCurrentPeriod(CompanyID, FacilityID)ORDER BY RangeIDmy select statement brought back the following:min max rate 90 100 .4080 89 .3070 79 .2560 69 .15and I ran the following select statement: SELECT [Min], [Max], [Rate] FROM [PerformanceDEV].[dbo].[WageMatrix] where companyid = '21' and facilityid = '01' and periodid = 2order by rangeid
I'm looking for a tool that can schedule stored procedures or queries and save the results to pdf or excel (preferrably both). SQL Server 2000, so 2005 reporting services are out, though if that has the capability I'd like to know because that might convince some of the powers that be to upgrade.
