dim strSQL As String
Dim ssceconn As New SqlCeConnection("Data Source = c:atisoftatisoft.sdf")
ssceconn.Open()
Dim sqlInsertRow As SqlCeCommand = ssceconn.CreateCommand()
Invalid database version. [ Db version = 0,Requested version = 0,File name = c:atisoftatisoft.sdf ]
Hi,I'am trying a very simple sql statement but it does not work.I use the SQL version 8.0I use the "Northwind" sample database and the Table "Employees".The sql statement is:SELECT * From Employees Where City = "London"The returned message is:Server: Msg 207, Level 16, State 3, Line 1Invalid column name 'London'.Can somebody tell me what could be wrong?Greetings,Steven de Vries
Is there any way to get the version of a database without attaching it to the server. Or can I attach a database without converting from SQL Server 2000 to SQL Server 2005.
The reason is that I have to ask the user before a convert the database from SQL Server 2000 to 2005.
I am experiencing a problem that, after i have made a backup database file in SQL Server version (9.00.1090), when i restore the database in a newer SQL Server 2005 version(9.00.1399), an error occurs.
The error is:
Restore failed for Server 'demo'. (Microsoft.SqlServer.Smo)
Additional information: System.Data.SqlClient.SqlError: The database was backed up on a server running version 9.00.1090. That version is incompatible with this server, which is running version 9.00.1399. Either restore the database on a server that supports the backup, or use a backup that is compatible with this server. (Microsoft.SqlServer.Smo)
Anyone can tell me how i could fix this? Why would it happen?
I have an sqlserver 2005 Enterprise edition (Evaluation version) installed on one of my servers.It got expired after 180days and now i want to transfer the database that was residing on that Evaluation version sqlserver to a new Development server.
Do we have any way to restore the database from a already expired Sqlserver trail version to a new Development server. I dont want make an upgrade. Please suggest me.
Since some analysis services features are only available in Enterprise version , I have to upgrade my SQL 2005 server from standard edition to enterpise edition.
So I uninstall originial standard version of analysis service and install a Enterprise version. However, the analysis service is still a standard version after installation.
Is it possible to keep data engine as standard version and install a enterprise version of analysis service?
Is there any way to restore a database of higher version to lower version.
E.g. I have created a database in sql server 2012, created some tables & procedures in that.I took Full backup of that database. Can I restore it to sql 2008r2 or any lower version.
I know direct restore is not possible, I have to use either import or export option or generating script,but i want to know is there any easy step to do so.
We have a 64bit os machine that we accidently loaded the 32 bit version of sql server on. We now want to upgrade it to 64 bit sql server, but we now have a production database on it. My understanding is that all I have to do is detach the production database, upgrade to 64bit sql server, then reattach the database. Is this really all I have to do?
I have tried to attatch a database ,created by SQL server Express within a C# application , in SQL server 2005 Enterprise edition, but the following error message appears:
-----------------------------
TITLE: Microsoft SQL Server Management Studio ------------------------------
Attach database failed for Server 'MEDO'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft SQL Server&ProdVer=9.00.1187.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach database+Server&LinkId=20476
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The database 'E:X.MDF' cannot be opened because it is version 611. This server supports version 607 and earlier. A downgrade path is not supported. Could not open new database 'E:X.MDF'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 948)
------------------------------
so , how can I solve this problem , I need to reed the data resides in the tables of 'X' database , how can I do it?? please help me.
I have an ssis package that downloads a SQL Server 2000 database and restores it to a SQL 2005 server. Ninety-five percent of the time it runs just fine, but every so often the job fails and I get the following set of error messages in the log file. (I have had to delete some of the proprietary information for this message to satisfy my boss like putting in [Database name] in place of the actual name of the database in the error message).
OnError, Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Converting database [Database name] from version 539 to the current version 611. OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Converting database [Database name] from version 539 to the current version 611. OnError,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Database [Database name] running the upgrade step from version 539 to version 551. OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Database [Database name] running the upgrade step from version 539 to version 551. OnError,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,The transaction log for database [Database name] is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,The transaction log for database [Database name] is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,RESTORE could not start database [Database name]. OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,RESTORE could not start database [Database name]. OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,-1073548784,0x,Executing the query "RESTORE DATABASE [Database name] FROM DISK = '[Path to back up file]' WITH REPLACE, MOVE 'ASP_Live_Data' TO [Path to MDF file], MOVE 'ASP_Live_Log' TO [Path to LDF file]" failed with the following error: "RESTORE DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,-1073548784,0x,Executing the query "RESTORE DATABASE [Database name] FROM DISK = '[Path to backup file]' WITH REPLACE, MOVE 'ASP_Live_Data' TO [Path to MDF file]', MOVE 'ASP_Live_Log' TO [Path to LDF file]" failed with the following error: "RESTORE DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. OnTaskFailed,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,(null)
Now, I checked and verified that my backup version of SQL Server is the same as the version installed on the computer I'm restoring too.
I have SQL Server on a production machine that I backed up and want to test a full restore on a dev machine to make sure it will work when I need it to.
Now that I've run the restore command on my tape backup and go to restart the SQL server service I receive:
Configuration block version 0 is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
I'm afraid I don't understand why this is happening. If the builds are the same, then shouldn't restoring the MASTER database have worked normally and I'd be able to restart the service now?
I recently upgraded to SQL Server 2005. My databases are stable and functioning perfectly. However, these databases are using the 32-bit version of SQL Server. The servers are going to be upgraded to 64-bit processors and new Server 2003 64-bit OS's.
Everything I have been able to find says that it is a simple process of backing up the databases in the 32-bit environment and restoring them in the 64-bit environment.
Could it really be that easy? I am looking for someone who has done this to provide any "heads up" commentary on what to look out for during that process. Can anyone provide some information on this process?
I have a developer who built an application using the SSE 2005 December CTP and I would like to bring the db's into the official SSE 2005 released version. I have attempted the following:
1. Create the db's in the released version, detach and re-attach the CTP db's. I got an error telling me they were incompatible.
2. Installed CTP version on one server, backed up the db's and then attempted to restore the db's on another server running the official released version of SSE 2005. Got an error attempting that too.
3. Installed the Management Studio for SS 2005 Developer edition thinking that I could connect to the two seperate instances of each server and like I could in EM 2000 run the transfer wizard to move the db's and data from one server to the next. Problem with this is that I can't get an object browser connection established. I have TCP/IP all config'd correctly, too.
Any other ideas where I can go with this at this time?
I installed Visual Studio 2005 Professional then after that was installed and running, I tried to install the the SQL Server 2005 Developer's Edition which installed but I do not get the SQL Server 2005 Studio Manager. I have remove and reinstalled but it never gets installed. Any ideas?
We have SQL Server 2005 Standard edition in a box. We need to update (install) that box with SQL Server Developer editions. Please let me know what are the ways to do it.
I m using Windows 2003 Server. I installed SQL Server2005 and now i want to apply CTP service pack on it. I downloaded all the SP2 patches available on the site http://www.microsoft.com/downloads/details.aspx?FamilyID=D2DA6579-D49C-4B25-8F8A-79D14145500D&displaylang=en . Each of them is giving an error and it is not getting installed on SQLServer 2005; Is it a problem with my hardware? or the version of Windows? or the version of SQLServer 2005?
We have SQL Server 2005 Standard edition in a box. We need to update (install) that box with SQL Server Developer editions. Please let me know what are the ways to do it.
I applied SQL Server 2005 SP1, everything appeared to run successfully but if I run select @@version, the version number did not update. I still see 1399 not 2047. Here is the last part of the hotfix log:
I have run exec xp_msver on the sql server management studio please can anybody tell me which edition of sql server 2005 i am using... is it ENTERPRISE EDITION or EXPRESS edition. thanks in advance regards, pranav
This will become a recommendation for my customer; we are struggling with performance on this new install which is temporarily done with the Evaluation version and I see a Service Pack has been published. Please advise?
I get this error when I try to view the database diagram. This is strange because it was about two weeks ago that I created and edited the database diagram. What is wrong with my login now as compared to when I did those edits?
The error suggests to use the ALTER AUTHORIZATION to change to a valid login. I am using windows authentication. If my login (the database ownere) is not the valid login then who is?
And what are the database diagram support objects that it suggests I install. I never heard of them, and where are they? Why didn't I need to install anything special when I worked on the diagrams two weeks ago?
Error message:
TITLE: Microsoft SQL Server Management Studio Express ------------------------------ Database diagram support objects cannot be installed because this database does not have a valid owner. To continue, first use the Files page of the Database Properties dialog box or the ALTER AUTHORIZATION statement to set the database owner to a valid login, then add the database diagram support objects. ------------------------------ BUTTONS: OK ------------------------------
if we generate a database file on a particular version of ms sql express and in time to come if there are a few more versions of ms sql express out there with the users - if we continue to package with our app a database file from an older version of sql express will that be a problem with users running a newer version of sql express ?
Also what about the converse scenario - where we ship a database file from a newer version of sql while the customer is still running on an older version.
Right im getting slightly annoyed LOL We have an MSSQL 2005 box in the shared hosting environment now the amount of attacks we receive every hour is a crazy amount. The usual stuff as below
Login failed for user 'sa'. [CLIENT: ]
Now i can simply block the ip's in ipsec but the amount of attacks is crazy and its taking all my time to keep track of them all, i know its just websites, automated tools etc, mssql is set to lock accounts after 4 invalid logins, well to make security sense i renamed the sa account as its default on most servers.
What i want to know is after so many attacks why can't mssql implement ipsec security on its own and block the client ip, come on after 20 attempts you know the IP is brute forcing the accoutn in question.
Any advice people? Its a high performance server but it doesnt need brute force attacks against it all day long, LOL.
When I installed VS 2005, it installed the default version of SQL Server 2005 Express that ships with Visual Studio 2005 installer media.
How can apply SQL Server 2005 Express SP1 to update this existing instance?
Currently, if I run this query:
SELECT @@version
I get the following:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
After applying SP1, I should get 9.00.2047.00.
Should I just go to this link and download & install the SQL Server 2005 Express Edition SP1:
I see in several recommendations I found from searching for answers why we were losing the connection to the database. One of these was tweaking the Network Interface Card to ensure it is set to 1024 in the registery. Another was twaeking the TCP-IP setting for windows under
Most of these did not mentioned SQL Server 2005. I wondering if someone of more experience with SQL Server 2005 than I can address if this action is required in the newer version.