Parser Error Message: Could not load file or assembly 'Microsoft.ReportViewer.WebForms, Version=9.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
I'm not sure what to do to fix this. I've downloaded the redistributable for the report viewer. Please help, I need to have this before the weekend is over.
Thanks,
I work with February CTP of SqlServer 2008.
I have an Assembly with several UDTs inside. Version of assembly is 1.0.*
I use CREATE ASSEMBLY statement to register this assembly, and it runs without any errors. Then I rebuild CLR solution without doing any changes in source code. In that case the only difference between new and old assemblies is version (difference in fourth part of version).
Then I try to update assembly in SqlServer. I use
ALTER ASSEMBLY <name>
FROM <path>
WITH PERMISSION_SET = UNSAFE, UNCHECKED DATA
statement for this. Statement runs with error:
Msg 6509An error occurred while gathering metadata from assembly €˜<Assembly name>€™ with HRESULT 0x1.
I found the list of condition for ALTER ASSEMBLY in MSDN:
ALTER ASSEMBLY statement cannot be used to change the following:
· The signatures of CLR functions, aggregate functions, stored procedures, and triggers in an instance of SQL Server that reference the assembly. ALTER ASSEMBLY fails when SQL Server cannot rebind .NET Framework database objects in SQL Server with the new version of the assembly.
· The signatures of methods in the assembly that are called from other assemblies.
· The list of assemblies that depend on the assembly, as referenced in the DependentList property of the assembly.
· The indexability of a method, unless there are no indexes or persisted computed columns depending on that method, either directly or indirectly.
· The FillRow method name attribute for CLR table-valued functions.
· The Accumulate and Terminate method signature for user-defined aggregates.
· System assemblies.
· Assembly ownership. Use ALTER AUTHORIZATION (Transact-SQL) instead.
Additionally, for assemblies that implement user-defined types, ALTER ASSEMBLY can be used for making only the following changes:
· Modifying public methods of the user-defined type class, as long as signatures or attributes are not changed.
· Adding new public methods.
· Modifying private methods in any way.
But I haven€™t done any changes in source code, so new version of assembly satisfies all this conditions.
What could be the reason for such behavior?
P.S. I€™ve got the same error, if I add or change any method in assembly before rebuilding.
Hi, I am getting the following error when I try to open up my web application now, after installing the report viewer add on and placing it onto one of my pages.
Parser Error Message: Could not load file or assembly 'Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=nutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system could not find the file specified.
Source Error:
Line 47: <add assembly="Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
Source File: web.config
So far I have tried to fix this error by installing the reportviewer.exe on the server. I have also verified that the ReportViewer files are in the assembly folder on the server. I also found a site saying to run the reportviewer.exe from a specific location, here is the link
http://dotnetslackers.com/_NET/re-49414_Could_not_load_file_or_assembly_Microsoft_ReportViewer_WebForms.aspx
but when I try to browse to the folder it is talking about I found out that I don't even have a BootStrapper folder under Microsoft Visual Studio 8/SDK/v2.0
Does anyone have any ideas on how to fix this error?
I am trying to integrate reports that I have built with VS 2005 and deployed to my report server locally.
The path to the report is
http://SERVERNAME/Reports/Pages/Report.aspx?ItemPath=%2fBilling+System+Reports%2fBasic+Financial+Reports%2fBasic+Financial+Statistics+-+TimeKeeper+YTD
When I put that into the "Report" parameter the web part display an error:
The report server has encountered a configuration error. See the report server log files for more information
And when I click on the ellipses, I get a pop up with the same error.
I installed SQL2005 SP2 and the RS Add on for MS sharepoint CTP
Any help would be great!
Thanks,
Erik
I have created a report on my local machine and deployed it on a server. As I am the administrator of the server, I can access the reports with servernameReports. The report has got three data sets. Out of these three one is a Stored procedure and other two data sets have sql queries. The user selects the 'Business year' and 'sales type' from list box. This report works perfect from my local machine as well as from teh server when I am running it
I have some other users who wish to access these reports. I did the following steps:
Created a new role and assigned it at the Data Source Folder and Reports Folder
I also made the user a Database user on the server.
After doing these steps, the user can access the Reports site by servernameReports.
The user then can go into the Reports folder. But when the user tries to run the report, he gets an error with:
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for data set 'BusinessYear'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
Can anyone help me with this? Is htere something to do with setting up of the datasource?
I have tried to search, but could not find relevant info.
Any help/Pointers will be really appreciated.
regards
Joshker
Hi,
We have a solution where we from a Windows application (using the report viewer control SP1) display some reports. Some of the reports uses a custom report item to display some graphics. This works fine on a lot of different installations, but now (for some reason) we have a problem at one customer.
We get strange GDI and transport errors when rendering these reports:
"Unable to read data from the transport connection: The connection was closed."
or
"Remote GDI stream version: 10.0.1. Expected version 10.0.1. Offset and length were out of bounds for the array or count is greater than the number of elements from the index to the end of the source collection."
These report work fine when you run them in the browser, but they never work in the report viewer control...
Please provide some help.
Kind Regards
Sune
Hi All,
I am deploying my reports on to the report viewer on a Sharepoint site. I wanted to know how to handle exception in the reports here. I was looking for exception handling in SSRS, but most of them are given with respect to displaying reports in ASP.NET pages. Is there any way I can configure Report Viewer to display friendly error messages instead of the vague error messages displayed from SSRS.
Thanks,
S Suresh
I have created a project using MVC 4 application.i have created a dataset model and .rdlc file using report viewer but i'm getting the following error when i run it.
View 5 Replies View RelatedI have created a .rdlc file in MVC application. I have used Matrix in report and also i have bar charts. Issue is when I view the report in my application--all the months data and all the years data is getting summed up..
ex:
it should display like
jan  feb  mar
1 Â Â 2 Â Â Â 3
but it is coming like
Mar
6
I have group by as Month for Month columns and Year for Year columns, how to fix this error.
Hello,
I am passing the partameters to MS Report Viewer control to view the report. It is working fine with normal parameters like 'abc', 'Jon' etc.
But fails with parameters having special characters like 'abc+', 'Version 1.1 Part 1', 'R1.8 RC' throws error "
The parameter is missing a value"
Could anyone please help on this.
Thanks,
Chandroday
I used the following reference code while creating this simple ASPX page with reportviewer control using VS 2005
http://www.tutorialsall.com/REPORTINGSVCS/WebFormsReportViewer-ReportServerCredentials/
ReportViewer is having following properties
ProcessingMode = "Remote",
ReportServerUrl = "/foldername/myreport
ReportPath = "http://report.mydomain.com/reports"
Even after using admin user we got the same problem
Please help
When I try to convert a report project from 2005, it seems to convert fine but then the project closes because VS2008 doesn't support that project type (.rptproj ?). I see that there is a report project type under VB (and I assume C#) but there is no Business Intelligence project catagory. It's a new machine and I did install SQL Server 2005 before VS2008.
I'm in the process of moving a bunch of projects and websites from another machine and got hung up on this one. Any pointers greatly appreciated.
We have written a test CRL stored procedure to test replacing one of our complex stored procedures but can€™t get it deployed to our SQL server that hosts a mirrored configuration of our production database (very locked down). It works fine on our development instances (not very locked down). It only references the default assemblies that were added when we created the project. All it does is use Context Connection=true to get data, loops though some records and returns the data using SQLContext. CLR is enabled on SQL server, the assembly is strongly signed, and we tried deploy using the binary string with the SAFE setting.
CREATE ASSEMBLY for assembly 'SQLCLRTest2' failed because assembly 'SQLCLRTest2' failed verification. Check if the referenced assemblies are up-to-date and trusted (for external_access or unsafe) to execute in the database. CLR Verifier error messages if any will follow this message
[ : SQLCLRTest2.StoredProcedures::GetLift][mdToken=0x600001e] Type load failed.
[token 0x02000008] Type load failed.
I have SSRS 2005 SP2 configured to work in Sharepoint integration. Everything works fine except that I am not able to programmatically change any property of report viewer web part (instance) that I have added on on home page of my sharepoint site.
I can do same thing via sharepoint UI but not through program. When my programs runs it fetches all web parts been added on home page, then I need to iterate through each one and find report viewer web part.
While iterating, as soon as I arrive to report viewer web part it is named as "Error web part" with error message as
"Windows SharePoint Services cannot deserialize the Web Part. Check the format of the properties and try again"
If someone has a solution, please respond at your earlist.
Thanks
Shankar
we're getting an error that says "C:....rptproj' cannot be opened because its project type (.rptprroj) is not supported by this version of Visual Studio. To open it, please use a version that supports this type of project." when trying to open RS projects created in VS2005 with VS2008.
We concluded from the specs on VS2008 that the DB Version of VS2008 wouldnt be necessary for RS projects. Were we wrong? Is there some other add in that we need, perhaps BIDS? Is there some conversion step that we need to follow?
I am trying to deploy a Database Project with Visual Studio 2005 and SQL Server 2005 Standard.
I import €œSystem.IO€? and have therefore set the permission levels to EXTERNAL_ACCESS.
I am receiving the same error message that many folks have received.
CREATE ASSEMBLY for assembly 'Images' failed because assembly 'Images' is not authorized for PERMISSION_SET = EXTERNAL_ACCESS.
The assembly is authorized when either of the following is true: the database owner (DBO) has EXTERNAL ACCESS ASSEMBLY permission and the database has the TRUSTWORTHY database property on; or the assembly is signed with a certificate or an asymmetric key that has a corresponding login with EXTERNAL ACCESS ASSEMBLY permission. If you have restored or attached this database, make sure the database owner is mapped to the correct login on this server. If not, use sp_changedbowner to fix the problem. Images.
My CLR access is €œon€?
I have tried
1) From master run: GRANT EXTERNAL ACCESS ASSEMBLY to [BuiltinAdministrators].
2) From master run: GRANT EXTERNAL ACCESS ASSEMBLY to €œMy Windows Authentication ID€?.
3) Run ALTER DATABASE MYDATABASE SET TRUSTWORTHY ON
4) In Visual Studio .NET 2005 Set the permission levels to €˜external€™
5) Tried BuiltinAdministrators and my SQL Server Windows Authenticated Login ID for the ASSEMBLY OWNER.
I can compile BUT NOT DEPLOY
Any help would be greatly appreciated.
Regards Steve
Can a person change the page title from "Report Viewer/Manager" to the actual report name?
View 3 Replies View RelatedHello,
Very strange phenomenon with the "Jump to report:" Hyerlink Actions when I deployed my reports to the production servers:
The Actions no longer funcioned properly when attempting to go to one report to another. Sometimes, the same report would come up and sometimes a different report. It appeared that whatever mechanism Report Server uses to construct the proper URL when using "Jump to report:" is unreliable(or the URL is not being honored by the web-server).
All this is happening under the Report Viewer control. I have had to do a painful fix of manually constructing the entire absolute URL and including the reportviewer control in the url.
Any way to get back relative Jump to report: URL's?
Thanks JS
We are generating excel report using report viewer at run time but if excel report having more then 65000 record generating error Microsoft. Reporting Services.OnDemandReportRendering.ReportRenderingException: Excel Rendering Extension: Number of rows exceed.
View 2 Replies View RelatedHi ,
I have a problem using Report Viewer With SQL Reporting Services 2005.
I had a really weird issue with a ReportViewer. It would show the little green Loading progress bar image €¦ but it wouldn€™t show any data, just a white background where the output should be. I knew the data was there because exporting to Excel or PDF showed the data just fine.
The problem is report toolbar is display but NO DATA is displayed and the report comes out as EMPTY .
Thanks in advance..
Can you please help me out in resolving this problem.
Hi,
I want to give filtering criteria in my SSRS report.
I have drop down list control having list of Email's of clients.
So, how can i pass the value of the particular Email id in my SSRS report using Report Viewer control?
How can i pass user input as parameter in my report using visula studio 2005?
Thanx,
Ruja
Hello,
I'm using Reporting Services to render a text (stored in sql as varchar(max)). The text is all plain text, with some lines having trailing spaces.
Source text file i've imported to SQL via SSIS:
CLIENT: 10055
STATEMENT 2007
DATE:1002993
THIS IS THE OTHER STATEMENT
COLUMN1 COLUMN2 COLUMN 3
TRY THIS
*Note the trailing spaces on the line before 'STATEMENT 2007'.
I've designed a report using the Report Project in VS2005 to retrieve this text via a stored procedure. When I test the report using the 'Preview' tab in the IDE, it looks good
CLIENT: 10055
STATEMENT 2007
DATE:1002993
THIS IS THE OTHER STATEMENT
COLUMN1 COLUMN2 COLUMN 3
TRY THIS
But when I deploy the report and run it using URL Access:
CLIENT: 10055
STATEMENT 2007
DATE:1002993
THIS IS THE OTHER STATEMENT
COLUMN1 COLUMN2 COLUMN 3
TRY THIS
On all lines with trailing spaces, they (the trailing spaces) have been removed. This is affecting my formatting of some reports and statements. We really want to use the report viewer as it has built in paging, print and export capabilities.
Why does it look okay in VS2005 but different in Report Viewer via URL Access and Report Manager?
Note: When I export as PDF, it looks okay.
The stored procedure I use to return the data is a CLR Hosted assembly as below:
Code Snippet
Partial Public Class StoredProcedures
<Microsoft.SqlServer.Server.SqlProcedure()> _
Public Shared Sub GetPagedDocument(ByVal inText As SqlString)
Dim dr As SqlDataReader
Dim row As New SqlDataRecord(New SqlMetaData("RowText", SqlDbType.Text))
Dim cmd As New SqlCommand("select cast(doc as varchar(max)) as 'DOCTEXT' from testdoc WHERE id='" + inText + "'")
Dim cn As New SqlConnection("context connection=true")
cn.Open()
cmd.Connection = cn
SqlContext.Pipe.SendResultsStart(row) 'initialise the resultset to be returned
dr = cmd.ExecuteReader
'If no records in result set, return.
If Not dr.HasRows Then
row.SetString(0, "There is no document to display or you do not have permission to view the document.")
SqlContext.Pipe.SendResultsRow(row)
SqlContext.Pipe.SendResultsEnd()
' SqlContext.Pipe.Send("There is no document to display.")
Return
End If
'Read rows in the result set
dr.Read()
'Get the entire text
Dim docText As String = dr.Item("DOCTEXT")
'debug
row.SetString(0, docText)
SqlContext.Pipe.SendResultsRow(row)
SqlContext.Pipe.SendResultsEnd()
Return
'end debug
End Sub
End Class
Any help will be appreciated.
Hello everyone,
I created a custom assembly using C# to transform some binary data into text, and in this assembly I used one win32 dll developed by our customer to help me to do the tranformation.
The code I used to call the win32 dll is like below:
[DllImport("tdasuie.dll", EntryPoint = "AlrtLogConditionToText",
ExactSpelling = false, CharSet = CharSet.Auto, SetLastError = true)]
private static extern UInt32 AlrtLogConditionToText(Byte[] pbCondition, StringBuilder pszText, UInt32 dwSize);
I defined a C# method to call the above win32 method and return a string. Then in the report, I called this C# method to get the correct string.
In the report designer, the C# method in the custom assembly can return the correct string in the preview window. But after I deployed the report into the report server, the textbox will only display "#error" in the report manager web page.
Can anybody help me on it? Thanks a lot.
Danny
i just clicked on Advanced mode in Column Group, and then in Row Group Side i set Fixed Data=true for first top static. I'm using local report not server report and i'm displaying that local report in Reportviewer. Now also its not working....
View 6 Replies View RelatedHi,
I am having hard time in sending parameters to the report server through reportviewer control from my application. Could anybody help me on this issue?. Is there any way to send the parameters and also what kind of configuration do i need on my report project so that it can accept parameters from my application.
Thanks,
Do I need the report server running in order view a SSRS report in a report viewer control? I've created my report in .net and it works great when I'm viewing it in visual studio, but can I run it my web app without the report server.
View 1 Replies View RelatedI just installed a fresh lab machine with WSS 3.0 and SQL 2005 SP1. I registered the RS web parts.
In the home page I added the Reports Explorer and the Report viewer web parts. I set up the Reports Explorer and the list of reports are showed.
When I connect the Report Viewer Web part to get report from the Report Explorer web part I get the maintenance WSS page. I have to delete the Report Viewer web part to have the page working again.
If I use only the Reports Viewer with a report (not connected to Reports Explorer) is working just fine.
Any ideas what could be the problem? Any hints on how to investigate this is also much appreciated.
Thanks,
Joe
Using the new Visual Studio 2008 I created a setup project for a small program, and added SQL Express 2005 SP2 to the list of prerequisites.
I checked the box so the setup project will contain all necessary files in a sub directory of the setup project.
My setup starts nice (on windows vista) prompts me to install SQL Express, setup of SQL Express runs for some time, I get an UAC prompt, then setup fails with error 1706.
The last lines of the setup log file:
Installing using command 'C:UserswilfiAppDataLocalTempVSDE5B7.tmpSqlExpresssqlexpr32.exe' and parameters '-q /norebootchk /qn reboot=ReallySuppress addlocal=all instancename=SQLEXPRESS SQLAUTOSTART=1 ADDUSERASADMIN=1'
Process exited with code 1706
Status of package 'SQL Server 2005 Express Edition SP2 (x86)' after install is 'InstallFailed'
I really would like to install SQL Express as part of the setup project, can someone help me with this problem?
Thanks in advance,
Sam
Hi,
I added a page to exsisting web site. Then I used report viewer to show a report. But when I try to view it in the browser, I get the following error message.
Server Error in '/Website' Application.
The type CustomReportServerConnection, APP_CODE does not implement IReportServerConnection or could not be found Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Reporting.WebForms.InvalidConfigFileTypeException: The type CustomReportServerConnection, APP_CODE does not implement IReportServerConnection or could not be found
Source Error:
Line 272: <asp:View ID="vwWARRatingChangeReport" runat="server">
Line 273: <aspanel ID="pnlWARRatingChangeReport" runat="server" Width="683px">
Line 274: <rsweb:ReportViewer ID="rvWARRatingChageReport" runat="server" Font-Names="Verdana" Font-Size="8pt"
Line 275: Height="100%" ProcessingMode="Remote" Width="100%">
Line 276: <ServerReport ReportPath="/CRMReportsQA/ORA/WARRatingsChange" ReportServerUrl="http://wiismab00035038:8095/Reportserver" />
Source File: c:Dev EnvironmentWebsiteApplicationsORAPDCRD.aspx Line: 274
Stack Trace:
But I created another website using visaul studio in my local machine and then used report viewer to disaply the same report. Its in server mode same as earlier. This one can be viewed without any trouble.
I'm not familiar with ASP.NET thing. Can anyone help me to resolve this one?
Thanks
Hi All
I have a reporting viewer in a windows form that behaves very strange. When I open the form and run the report it shows up nicely in the report viewer. If I print the report it only prints one page. When i print the report a second time the whole report is printed. Next I'll change the report parameters and run the report, then it shows up nicely in the viewer, but when I print the report the first report is printed.
Does anyone know what to do with this problem?
Thanks in advance
Hi All,
I have a Report Viewer and a Exit button in Web Form. Untill the report is processed i don't want to enable the button.
so Is it possible to know whether report is still executing in report viewer ?
I am using Remote Mode.
Any help will be appreciated.
Thanks
Akash
sorry but this is my first dayes to using sql report services i make 14 report in sql report services server and do't know how can i add this reports to my aspx page
and every report have parameters how can i send this parmeter to reports when he open or load in aspx page
like companyID and employeeID
my report have his datasource and dataset
sorry but i just start to using reports services
I am looking for capturing Report viewer events on the web form. Can anyone tell me how to fo this?
Thanks,
S Suresh