Valid Scope Values For The Function RowNumber(Nothing) ??
Nov 8, 2006
Hi there
I have a sales report that is pulling up data and displaying the detailed lines and the aggregate/summary lines grouped by a single field.
THe report say has 10 summary/aggregate lines and each summary lines have a maybe 20 more lines to it.
I want to NUMBER the SUMMARY lines only. In a new column on the summary line cell, if I type, =RowNumber(Nothing), I get a count of all its sub-lines displayed. How can I limit the scope of numbering to just the summary lines and make sure it does not include the sub lines involved ?
I have a detailed report ..with summary lines and detailed lines (drill down).
I have a column with a function "RowNumber(Nothing)" which is supposed to just count the rows
when I put this in the summary row for the column I need in the Design Layout section and run the report, I get numbers on the summary lines which include the number of rows in the level below (detailed rows).
I just want to number the summary rows sequentially without taking into consideration, the number of detailed rows.
How do I modify RowNumber(Nothing) to exclude counting the detailed rows....???
I am trying to create a column chart that calculates the percentage of computers in our IT environment that are Actively communicating to our SCCM Server.
I have two datasets:
1. Total_Count_Of_AD_PC DataSet.
2. PC_With_Active_SCCM_Clients dataset.
Basically i wan to calculate the percentage for each Region (i.e. AP for Asia Pacific, EMEA, Americas).
Below is the Total_Count_Of_AD_PC Dataset screenshot.
Below is the PC_With_Active_SCCM_Clients dataset.
Below is the expression that i used that is causing the error.
The Y expression for the chart ‘Chart2’ has a scope parameter that is not valid for an aggregate function. The scope parameter must be set to a string constant that is equal to either the name of a containing group, the name of a containing data region, or the name of a dataset.
I'm trying to sum a column in a report. in Most columns I can just wrap the row level expression with "Sum()" and it works. However, I have run into a few that give the following error. The Value expression for the text box ‘Textbox241’ specifies a scope that is not valid for a nested aggregate. The scope must be the same name of the scope specified by the outer aggregate or the name of a group or data region that is contained in the scope specified by the outer aggregate.Here is my row level expression that works.
Hi, I create a matrix table with wizard. I want to write rownumber() as a new column near my column. But when =Rownumber(nothing) it returns the value of the record in the dataset. If the data in the 56.row then =Rownumber(nothing) =56 But in the preview of table it is in 1.row.
I am deploying an rdl that is being deployed in a server.But i am encountering a problem regarding the valid values of the parameter.My parameters have dependencies,and one of my parameter comes out with two dependencies.
Scenario : User needs to input his userID to access Book A. Book B needs Book A because the output will be depending on the its content. And Book C depend on Book B.
Problem: when deploying, only Book A will have the initial value.The dependency in Book B is only one,which is fine.It shows its valid values. But how about for Book C which have 2 dependencies? Because it doesnt show it's valid values..
I have inherited a database that has a column defined as bit. Looking at BOL it shows the valid values are 0,1, null. However there are several rows of data which have -1. Is BOL wrong? we think a VB program runs an update which changes this.
We have a report server which has lots of reports. this particular report has 375 subscriptions and 80% of them are failing with the error "The subscription contains parameter values that are not valid." since last week nothing new was done on the server. when I open the properties of one of the subscriptions, one of the parameter value shows as a number where as it should be the name of a state.
Not sure what to do to get the subscriptions back.
Hello, I have something like 100 regular subscriptions. It sometimes happen that one of the subscriptions suddenly stop to work with error "The subscription contains parameter values that are not valid". Example, one report has a dozen subscriptions, one of them stop to work. I look into the subscription and see that either one of the parameters is no longer set to a value or see nothing special besides the warning at the top of the subscription page. Parameters are all set to either default or some value(s). I reset one of the parameters, validate, or simply validate with no change and it works again. Next time, in one or three weeks another subscription will fail, I will reset it. Sometimes there are no errors, sometimes just 1 error and sometimes multiple errors accross reports or sometimes one report will suddenly have a few errors. Right now, I use a weekly report to warn me after the fact of what were last week errors if any (no data, parameters unvalid, etc). It looks like it happen with strings parameters based on datasets like "Sales offices" by example, where value and label are the same. Note that sales offices are by nature very stable, we do not change the spelling nor add remove entries. The list being a dataset gets rebuild, just to make sure we do not miss any eventual new sales office but if there is a new sales office, no one had a chance to select it as parameter value before it is in the dataset. I am really not sure what is going on, were parameters values changed in the metadata? I do not think so. Anyways, Is there a way to get an early warning instead of an after the fact error warning? Is there anything else I coud try to "Refresh" or "remap" parameters values to avoid these errors? When the subscription was created by a business analyst, If the parameters becomes blank, I have a hard time figuring out what it was when it was still valid. Is there any way to have a list of parameters values and have these values automatically "re-selected" by report server when the value gets lost? This is not a big problem however it is annoying and people will have a bad perception of the system quality. "I created a subscription for Sacramento and never got my report", some people will also introduce garbage because they will create a new subscription instead of fixing the broken one, then they may eventually get twice the same report. Any thought, does anyone had the same problem?
I have taken three dtsx files and re written them into one each in its own container. I use the XML Task task alot which the File connection is set by a variable and the variable value is evaluated by expression (the expression makes up the path/filename from other variable values). All the variables that make up the connection are at the container scope. The package will not run now because it is saying that the source (created by variables) for the file connection do not exist.
It seems the answer is that file connections exist at the package level therefore the variable has to be at the package level. This seems to be alot of variables i now have to move to package level to generate the XML source connection. Which in essence makes it confusing as to which variables operate in which container.
My question is can we easily move variable scope (Not ideal as we have alot of variables at package level) Or Can we do the same for connection managers as we do for variables and have them only used in a scope? (this will be ideal as some connections only need to be at a container scope)
I am trying to write a stored procedure to be used for custompaging and I get error with the below SP. "Msg 207, Level 16, State 1, Procedure GetDealersPagedSP, Line 14 Invalid column name 'RowRank'." What am I doing wrong? CREATE PROCEDURE dbo.GetDealerSP (@startRowIndex int,@maximumRows int)AsSELECT installersemaid,dealerid,[name],address1,address2,city,[state],zip,phone,faxFrom(SELECT installersemaid,dealerid,[name],address1,address2,city,[state],zip,phone,fax, ROW_NUMBER() OVER(ORDER BY [name] DESC)AS RowbankFROM dealerenrollment)as DealerWithRowNumbersWHERE Rowbank > @startRowIndex AND RowRank <= (@startRowIndex + @maximumRows)Go
I understand that if using this function with "nothing" between parentheses, then the running row total never resets.
However, I am hoping to have the row counter reset when a group value changes. I tried putting both the field and the defined group name in the parentheses both with and without quotes, but I get an error.
What is the correct syntax for accomplishing this?
We have a requirement of creating a report which has one data set And the same data set is being used accross different tables in the report. The tables differ by the type of grouping applied on them.
My situation is 1. The table has two groups applied a) table level group is on DIVISION b) detail grouping is done based on two columns: SYSTEM and NAME 2. When i use the expression rownumber("DIVISION") or rownumber("SYSTEM_NAME"), it does not return a proper sequence
I need the row numbers to be generated based on the grouping on (SYSTEM and NAME) for each DIVISON
I got problem with using custom paging in sql 2005 SET ANSI_NULLS OFF GO SET QUOTED_IDENTIFIER OFF GO ALTER PROCEDURE [dbo].[searchperson_view_general] @Search nvarchar(2000) ,@OrderBy nvarchar (2000) ,@PageSize int ,@PageIndex int AS DECLARE @PageLowerBound int DECLARE @PageUpperBound int
SET @PageLowerBound = @PageSize * @PageIndex SET @PageUpperBound = @PageSize - 1 + @PageLowerBound
--Default order by to first column IF (@OrderBy is null or LEN(@OrderBy) < 1) BEGIN SET @OrderBy = 'p.[person_id]' END
-- SQL Server 2005 Paging declare @SQL as nvarchar(4000) SET @SQL = 'WITH PageIndex AS (' SET @SQL = @SQL + ' SELECT distinct' IF @PageSize > 0 BEGIN SET @SQL = @SQL + ' TOP ' + convert(nvarchar, @PageUpperBound) END
SET @SQL = @SQL + ' ROW_NUMBER() OVER (ORDER BY ' + @OrderBy + ') as RowIndex ' SET @SQL = @SQL + ', p.[person_id]' SET @SQL = @SQL + ', p.[userType_id]' SET @SQL = @SQL + ', p.[fullName]' SET @SQL = @SQL + ', p.[gender_nm]' SET @SQL = @SQL + ', p.[dateOfBirth] ' SET @SQL = @SQL + ', p.[positionTitle]' SET @SQL = @SQL + ' FROM dbo.[person_view] p '
IF LEN(@Search) > 0 BEGIN SET @SQL = @SQL + @Search END SET @SQL = @SQL + ' ) SELECT distinct' SET @SQL = @SQL + ' p.person_id' SET @SQL = @SQL + ', p.userType_id' SET @SQL = @SQL + ', p.fullName' SET @SQL = @SQL + ', p.gender_nm' SET @SQL = @SQL + ', (year(getdate()) - year(p.[dateOfBirth])) as [dateOfBirth] ' SET @SQL = @SQL + ', p.positionTitle' SET @SQL = @SQL + ' FROM PageIndex p ' SET @SQL = @SQL + ' WHERE RowIndex > ' + convert(nvarchar, @PageLowerBound)
IF @PageSize > 0 BEGIN SET @SQL = @SQL + ' AND RowIndex <= ' + convert(nvarchar, @PageUpperBound) END
SET @SQL = @SQL + ' ORDER BY ' + @OrderBy exec sp_executesql @SQL
I checked my store procedure with parameters exec [hr2b_searchperson_view_general_load] 'LEFT OUTER JOIN qualification ON p.person_id = qualification.person_id WHERE qualification.institutionName like N''%ABC%''' ,' p.person_id asc ', 25 , 1
This is a actual query show :
WITH PageIndex AS ( SELECT distinct TOP 49 ROW_NUMBER() OVER (ORDER BY p.person_id asc ) as RowIndex , p.[person_id] , p.[userType_id] , p.[fullName] , p.[gender_nm] , p.[dateOfBirth] , p.[positionTitle] FROM person_view p LEFT OUTER JOIN qualification ON p.person_id = qualification.person_id WHERE qualification.institutionName like N'%ABC%' ) SELECT distinct p.person_id , p.userType_id , p.fullName , p.gender_nm , (year(getdate()) - year(p.[dateOfBirth])) as [dateOfBirth] , p.positionTitle FROM PageIndex p WHERE RowIndex > 25 AND RowIndex <= 49 ORDER BY p.person_id asc
If I used this query without using DISTINCT it will return extactly number of records which I expected but It is duplicated. Then I tried to use DISTINCT in this query number of records return is less than 25 records . Because it was duplicated records when I used LEFT OUTER JOIN.But my query will be able to use more LEFT OUTER JOIN than this query. Please help me get exactly 25 records?
This is my tables person_view(person_id, fullname, userType_id, gender_nm, dateOfBirth, positionTitle)
I have a table like thisorder_id price1 -10002 20003 30004 4000I want to know the total of the order amount, I use this querySELECT SUM(price)FROM MyTableand I get 8000 instead of 9000. The negative value seems to be read twice!Do you have an idea?Thanks a lot
I have a requirement to find the rowmumbers based on a group. I know there is Rownumber function in sql. How can I implement the same in DAX. PFA screenshot. Rownumber is the calculated field i want based on the id and name column group.
I have this assignment where i have a table full of two digit exam scores and I have to write a function that eliminate x number of top values and x number of bottom values and return all the middle values. When the function is called, obviously a number is entered such as 3 and the top 3 and bottom 3 scores are not returned. i.e. SELECT * FROM GetMiddleValues (3);
If anyone has any ideas on how to accomplish this, that would be great.
I have created a function to return values, which works fine, but I can't do calculations in it.
CREATE FUNCTION [dbo].[tf_Asset_Portfolio](@deal_id int, @as_of_date datetime) RETURNS TABLE AS RETURN ( SELECT DISTINCT dbo.Assets.issue_id, SUM(DISTINCT dbo.Assets.par_amount) AS par_amount, SUM(DISTINCT dbo.Assets.par_amount) AS market_value FROM dbo.Issue INNER JOIN dbo.Assets ON dbo.Issue.issue_id = dbo.Assets.issue_id INNER JOIN dbo.Issuer_Rating_History ON dbo.Issue.issuer_id = dbo.Issuer_Rating_History.issuer_id WHERE (dbo.Issuer_Rating_History.as_of_date <= @as_of_date) GROUP BY ALL dbo.Assets.issue_id, dbo.Assets.deal_id, dbo.Issue.default_date HAVING (dbo.Assets.deal_id = @deal_id) )
I need to do calculations on market value based on the default date. If default date isn't specified then it should be 100% of par amount. If default date is less than one year ago - 65% of the par_amount. If default date is one or more years ago - 0. I have no idea about how to do this and everything I try wont work. I created another function to do the calculations and this seems to work, but it only does one record instead of all of them.
CREATE FUNCTION dbo.tf_Asset_Portfolio2 (@deal_id int, @as_of_date datetime) RETURNS @Market TABLE (issue_id int, par_amount money, market_value money) AS BEGIN DECLARE @ReturnDate datetime DECLARE @DD datetime DECLARE @PA money DECLARE @MV money DECLARE @ID int DECLARE @DateD int
SELECT TOP 1 @ReturnDate = LAST_BATCH FROM master..sysprocesses WHERE SPId = @@SPID
SELECT @ID = issue_id FROM Assets WHERE Assets.deal_id = @deal_id SELECT @PA = SUM(DISTINCT par_amount) FROM Assets WHERE Assets.issue_id = @ID AND Assets.deal_id = @deal_id SELECT @DD = default_date FROM Issue WHERE Issue.issue_id = @ID
SET @DateD = DateDiff("yyyy", @DD, @ReturnDate)
If @DD = Null BEGIN SET @MV = @PA END Else If @DD > @ReturnDate BEGIN SET @MV = @PA END Else If @DateD < 1 BEGIN SET @MV = @PA * .65 END Else If @DateD >= 1 BEGIN SET @MV = 0 END
insert into @Market (issue_id, par_amount, market_value) values (@ID,@PA,@MV)
RETURN END
I need to combine the functionality of being able to return mutliple records that isn't in the 2nd function and being able to calculate the market value which isn't in the first one. Please help. Thank you in advance.
Not nice but a work around: is there a way to get the amount of fields or rows from a table or query within MS SQL, to pick out the lastfield-4 for example ?
I will try my best to explain this, We have a shopping cart on our website, the person that was developing this has now left the company and I've been given the job to finish it off.
When I load all the items that the user has entered in to his/her cart I return the Item ID and the RowNumber (ROW_NUMBER() OVER (Order by Id) AS RowNumber)
I'm trying to delete the item from the table using the following query
DELETE FROM [dbo].[Cart.Items] WHERE UniqueID = UniqueID and ItemID = @ItemID and @RowNumber IN ( SELECT ROW_NUMBER() OVER (Order by Id) AS RowNumber)
Now the reason we are using the RowNumber is because the user can add the same Item as many times as they like so for example you buy 3 different mobile phones, and you want three screen protectors, they will click screen protector 3 times which will add 3 records in to the db with the same id. so the row number is used to find the correct one.
The script below works but i have a break when datediff (days,startdate, endate) reaches 0. For every bookidm i want to iterate till the datediff is zero then move on to next bookid and do the same thing.
I have a report with details grouping on table. What i need to do is put row number only on Parent row and skip the child row. When i use RowNumber("GroupName") of course it gives me a current RowNumber. Is there a way to count only parents?
i am working on a small "Biztalk" engine, by creating dynamic ssis packages that change according to the client source file definition.
in order to create a row-number to each row in my input file, i am tryng to add the Konesans's Row Number component to the dynamic package by using SSIS API, but i get a lot of errors. the component is not created as a"rowNumber" component, but as a General Managed Component, though i use the ComponentClassID as the classID in the RowNumber component.
has anybody try to do this ?
is there any way to get the row number other then this way?
I have got question because time is running but I still don't know how to do it.
So I have 1 group with 3 rows and I would like to put for each row not only group individual number like 1,2,3,4,5 ... etc until end of report. Generally using fuction RowNumber I got 1,2,3 and then 1,2,3 again.
