The problem: I need to validate all stored procedures on my server that they have not been altered after the application has been created.
Our server installation creates the user stored procedures for the application. Once created, I need a way to validate that the proc code has not been altered.
Previously, we were validating against the value of stats_schema_ver and crdate in the sysobjects table for the given stored procedure. During installation we would create a hash value of the crdate and stats_schema_Ver values for all our user defined procs. Then during validation, we would recreate the hash value and compare to that created during installation. If they differed, we knew that the proc code had been altered in some way.
Any alteration of the stored proc would update the stats_schema_ver- if the proc was dropped and recreated, it would update the crdate.
In 2005, the stats_shema_ver value is no longer updated when the proc is altered.
Perhaps this method was completely off-base to begin with...
So, how *does* one verify after installation that no proc code has been altered since installation?
The other option was to create a hash of the proc text definition- but that seems absolutely tedious to rehash the current proc definition every time the proc is accessed. There's also the problem that if you use the "with encryption" directive, it's no longer easy to get the text definition of the proc back out.
Appreciate any general thoughts or specific feedback.
Hey all, I have access as my front end and has upsized to sql server 2000. DLookup function that was in VBA code before was working fine. but after upsizing there is the problem in that code... What could be the alternative for DLookup Function in sql server.. Do i have to write a view or stored procedure..?
Using SQL Server 2005. Writing SQL code but I need to use the reults from two different stored proc. How do you code a select statement using a stored proc. I know when using views you just use the view name in the From or join statemnt, but do you do the same with using a Stored proc. Thank you for your help. David
I am looking for a store procedure which validates certain keywords like delete,truncate,update,insert etc. and restricts them to be used by users in all of my store procs which takes strings as inputs.
I have a database trigger that is set to call a CLR trigger/stored proc when a certain field in a table is updated. The issue is that if i execute the stored proc manually in enterprise studio, it works perfectly but the same call made through the trigger does not go through. A few more details -
I have CLR integration enabled on the sql server.
The dbo has UNSAFE ASSEMBLY rights
I have the both the assembly and the serialized dll imported in the database.
Here's the definition of the stored proc -
CREATE PROCEDURE [dbo].[WriteXMLNotification]
@TaskID [nvarchar](20)
WITH EXECUTE AS CALLER
AS
EXTERNAL NAME [DataInterfaceWebServices].[TaskUpdateXMLWriter.WriteXMLNotification].[run]
and the trigger -
CREATE TRIGGER [dbo].[tr_Task_U]
ON [dbo].[_Task]
FOR UPDATE, INSERT AS
IF UPDATE (TaskType_Status) OR UPDATE (TaskType) OR UPDATE (TaskType_SubType1)
BEGIN
SET NOCOUNT ON;
DECLARE @status AS INT
DECLARE @taskType AS INT
DECLARE @taskSubType AS INT
DECLARE @taskID as sysname
DECLARE @cmd as sysname
DECLARE @parentTask as sysname
DECLARE @NotificationXMLTaskID as sysname
SELECT @status = [TaskType_Status] FROM inserted
SELECT @taskType = [TaskType] FROM inserted
SELECT @taskSubType = [TaskType_SubType1] FROM inserted
SELECT @taskID = [TaskID] FROM inserted
SELECT @parentTask = [Parent_TaskID] FROM inserted
SELECT @NotificationXMLTaskID = [MCCTaskID] FROM _TaskNotificationXML WHERE [MCCTaskID] = @parentTask
IF (@status = 2602) AND (@taskType = 2282) AND (@taskSubType = 19500)
BEGIN
exec WriteXMLNotification @taskID;
END
ELSE IF (@taskType = 2285) AND (@parentTask IS NOT NULL) AND (@NotificationXMLTaskID IS NOT NULL)
BEGIN
exec WriteXMLNotification @parentTask;
END
END
I stepped into the trigger and it seems to execute the line " exec WriteXMLNotification @taskID;" but nothing happens, but if I run that same line manually, it works. Could it be that the impersonation by the EXECUTE AS clause is causing it to fail?
I am trying to debug sql2000 sp from managed code app with VS.Net 2003 archetect Ed.. It did not stop at the break point within the sql sp. I did granted execute permission for sp_sdidebug. Do I need to attach any process?
Is there anything left off by the article? I referenced msdn article option 2: http://support.microsoft.com/default.aspx?kbid=316549
I'm writing an application using VB 6.0 as the front-end GUI, and theMSDE version of SQL Server as the back-end (it's a program for areally small # of users --- less then 3-4).I'm trying to determine, through the Visual Basic interface, thepermissions of each user that's using the application on his/hermachine.For example, let's say I'm user "Michael" that's sitting down at mymachine using the app. I've written. The security for logging intoSQL Server will be setup using Windows Security (Trusted Connection)as opposed to Windows & SQL Server security. When Michael accesses aparticular form in the VB 6.0 GUI, I want to run some code thatautomatically checks Michael's permission levels on the underlyingtable (actually, a stored procedure supplying the data from the table)that supplies the data to the form he's looking at and then give himsome feedback on the form as to what type of permissions he has whilehe's browsing through the data shown in the form.For example, Michael opens a particular form, code in the backgroundis run to identify that this is Michael accessing the form, the codereturns a value that identifies what type of permissions he has on thedata in the form, and a text box on the form informs Michael (forexample) that he only has read-only permissions to the data he isviewing and cannot edit any of the data.As another example, user Karen sits down at her computer, logs intothe application, opens the same form that Michael just opened, thecode is run in VB to detect the level of permissions she has on thedata being displayed in the form, and the text box on the form informsher that she has editing permissions on the data in the underlyingtable.Etc...If anyone can post an example of the code they use in accomplishingthis task in an application they've written, I'd really appreciate apoint in the right direction or a real-world example that's beenimplemented by one of you. I've written several apps. thus far usingMSDE as the back-end, but the previous apps. I've written were forclients that didn't care about restricting access to theapplication... everyone could pretty much use the application as theydesired and do anything they desired to the data.The current client I'm writing the app. mentioned here for wants tohave security in place to where various users access the applicationwith various levels of permissions to do stuff (or *not* do stuff) tothe data in the application.Thanks very much in advance for any assistance / code provided!Sincerely,Brad McCollumJoin Bytes!
I am trying to use SSIS to update an AS400 DB2 database by calling a stored procedure on the AS400 using an OLE DB command object. I have a select statement running against the SQL Server 2005 that brings back 20 values, all of which are character strings, and the output of this select is piped into the OLE DB command object. The call from SSIS works just fine to pass parameters into the AS400 as long as the stored procedure being called does not have an output parameter defined in its signature. There is no way that I can find to tell the OLE DB command object that one of the parameters is an output (or even an input / output) parameter. As soon as one of the parameters is changed to an output type, I get an error like this:
Code Snippet
Error: 0xC0202009 at SendDataToAs400 1, OLE DB Command [2362]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
Error: 0xC0047022 at SendDataToAs400 1, DTS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "OLE DB Command" (2362) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at SendDataToAs400 1, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0202009. There may be error messages posted before this with more information on why the thread has exited.
Information: 0x40043008 at SendDataToAs400 1, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at SendDataToAs400 1, DTS.Pipeline: Cleanup phase is beginning.
Task failed: SendDataToAs400 1
Warning: 0x80019002 at RetrieveDataForSchoolInitiatedLoans: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Warning: 0x80019002 at Load_ELEP: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Load_ELEP.dtsx" finished: Failure.
I really need to know if the call to the AS400 stored procedure succeeded or not, so I need a way to obtain and evaluate the output parameter. Is there a better way to accomplish what I am trying to do? Any help is appreciated.
I am just trying to capture the return code from a stored proc as follows and if I get a 1 I want the SQL Task to follow a failure(red) constrainst workflow and send a SMTP mail task warning the customer. How do I achieve the Exec SQL Task portion of this, i get a strange error message [Execute SQL Task] Error: There is an invalid number of result bindings returned for the ResultSetType: "ResultSetType_SingleRow".
Using OLEDB connection, I utilize SQL: EXEC ? = dbo.CheckCatLog
EXEC SQL Task Editer settings: RESULTSET: Single Row PARAMETER MAPPING: User::giBatchID DIRECTION: OUTPUT DATATYPE: LONG PARAMETER NAME: 0
PS-Not sure if I need my variable giBatchID which is an INT32 but I thought it is a good idea to feed the output into here just in case there is no way that the EXEC SQL TASK can chose the failure constrainst workflow if I get a 1 returned or success constraint workflow if I get a 0 returned from stored proceedure
CREATE PROCEDURE CheckCatLog @OutSuccess INT AS
-- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON DECLARE @RowCountCAT INT DECLARE @RowCountLOG INT
---these totals should match SELECT @RowCountCAT = (SELECT Count(*) FROM mydb_Staging.dbo.S_CAT) SELECT @RowCountLOG = (SELECT Count(*) FROM mydb_Staging.dbo.S_LOG) --PRINT @RowCountCAT --PRINT @RowCountLOG BEGIN IF @RowCountCAT <> @RowCountLOG --PRINT 'Volume of jobs from the CAT file does not match volume of jobs from the LOG file' --RETURN 1 SET @OutSuccess = 1 END GO
Hello. You can compile a proc with a non-existant table. proc compiles do fail though on exsiting tables with non-existing columns.
Anyways, question is, how can you scan thru all procedure code to find tables that do not exist in the database? Is there any new DM feature that provides this info? Meaning, if I have a proc and inside it, refer to a table name that does not exist, I want to know the proc will not execute clean. Can the deferred name resolution be turned off somehow?
I'm having a strange problem that I can't figure out. I have an SQL stored procedure that updates a small database table. When testing the Stored Procedure from the Server Explorer, it works fine. However, when I run the C# code that's supposed to use it, the data doesn't get saved. The C# code seems to run correctly and the parameters that are passed to the SP seem to be okay. No exceptions are thrown. The C# code: SqlConnection conn = new SqlConnection(ConfigurationManager.ConnectionStrings["touristsConnectionString"].ConnectionString); SqlCommand cmd = new SqlCommand("fort_SaveRedirectURL", conn); cmd.CommandType = CommandType.StoredProcedure; Label accomIdLabel = (Label)DetailsView1.FindControl("lblID"); int accomId = Convert.ToInt32(accomIdLabel.Text); cmd.Parameters.Add("@accomId", SqlDbType.Int).Value = accomId; cmd.Parameters.Add("@path", SqlDbType.VarChar, 250).Value = GeneratePath(); try { conn.Open(); cmd.ExecuteNonQuery(); } catch(Exception ex) { throw ex; } finally { conn.Close(); } The Stored Procedure: ALTER PROCEDURE developers.fort_SaveRedirectURL ( @accomId int, @path varchar(250) ) AS DECLARE @enabled bit, @oldpath varchar(250)
/* Ensure that the accommodation has been enabled */ SELECT @enabled = enabled FROM Experimental_Accommodation WHERE Experimental_Accommodation.id = @accomId
IF (@enabled = 1) BEGIN /* Now check if a path already exists */ SELECT @oldpath = oldpath FROM Experimental_Adpages_Redirect WHERE Experimental_Adpages_Redirect.accom_id = @accomId
IF @oldpath IS NULL BEGIN /* If Path already exists then we should keep the existing URL */ /* Otherwise, we need to insert a new one */ INSERT INTO Experimental_Adpages_Redirect (oldpath, accom_id) VALUES (@path,@accomId) END END RETURN
I am working with a large application and am trying to track down a bug. I believe an error that occurs in the stored procedure isbubbling back up to the application and is causing the application not to run. Don't ask why, but we do not have some of the sourcecode that was used to build the application, so I am not able to trace into the code. So basically I want to examine the stored procedure. If I run the stored procedure through Query Analyzer, I get the following error message: Msg 2758, Level 16, State 1, Procedure GetPortalSettings, Line 74RAISERROR could not locate entry for error 60002 in sysmessages. (1 row(s) affected) (1 row(s) affected) I don't know if the error message is sufficient enough to cause the application from not running? Does anyone know? If the RAISERROR occursmdiway through the stored procedure, does the stored procedure terminate execution? Also, Is there a way to trace into a stored procedure through Query Analyzer? -------------------------------------------As a side note, below is a small portion of my stored proc where the error is being raised: SELECT @PortalPermissionValue = isnull(max(PermissionValue),0)FROM Permission, PermissionType, #GroupsWHERE Permission.ResourceId = @PortalIdAND Permission.PartyId = #Groups.PartyIdAND Permission.PermissionTypeId = PermissionType.PermissionTypeId IF @PortalPermissionValue = 0BEGIN RAISERROR (60002, 16, 1) return -3END
I am having trouble executing a stored procedure on a remote server. On my local server, I have a linked server setup as follows: Server1.abcd.myserver.comSQLServer2005,1563
This works fine on my local server:
Select * From [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.dbo.TableName
This does not work (Attempting to execute a remote stored proc named 'Data_Add':
When I attempt to run the above, I get the following error: Could not locate entry in sysdatabases for database 'Server1.abcd.myserver.comSQLServer2005,1563'. No entry found with that name. Make sure that the name is entered correctly.
Could anyone shed some light on what I need to do to get this to work?
Hi All,Quick question, I have always heard it best practice to check for exist, ifso, drop, then create the proc. I just wanted to know why that's a bestpractice. I am trying to put that theory in place at my work, but they areasking for a good reason to do this before actually implementing. All Icould think of was that so when you're creating a proc you won't get anerror if the procedure already exists, but doesn't it also have to do withCompilation and perhaps Execution. Does anyone have a good argument fordoing stored procs this way? All feedback is appreciated.TIA,~CK
I have an ASP that has been working fine for several months, but itsuddenly broke. I wonder if windows update has installed some securitypatch that is causing it.The problem is that I am calling a stored procedure via an ASP(classic, not .NET) , but nothing happens. The procedure doesn't work,and I don't get any error messages.I've tried dropping and re-creating the user and permissions, to noavail. If it was a permissions problem, there would be an errormessage. I trace the calls in Profiler, and it has no complaints. Thedatabase is getting the stored proc call.I finally got it to work again, but this is not a viable solution forour production environment:1. response.write the SQL call to the stored procedure from the ASPand copy the text to the clipboard.2. log in to QueryAnalyzer using the same user as used by the ASP.3. paste and run the SQL call to the stored proc in query analyzer.After I have done this, it not only works in Query Analyzer, but thenthe ASP works too. It continues to work, even after I reboot themachine. This is truly bizzare and has us stumped. My hunch is thatwindows update installed something that has created this issue, but Ihave not been able to track it down.
I'm currently in the midst of writing my first sqlclr sproc.
In our normal T-SQL sprocs we use the following:
OBJECT_NAME(@@PROCID)
to get the name of the sproc. We later use the result of this as a parameter to a custom message when we use RAISERROR.
Question is, is there a way of doing the same from within a SQLCLR sproc? i.e. Can someone give me a bit of code that will return the name of the current sproc? (Obviously this is not the same as the name of the .Net class that implements my sproc).
Thanks in advance for any help that you can provide.
I have a stored procedure "uspX" that calls another stored procedure "uspY" and I need to retrieve the return value from uspY and use it within uspX. Does anyone know the syntax for this?
I have about 5 stored procedures that, among other things, execute exactly the same SELECT statement
Instead of copying the SELECT statement 5 times, I'd like each stored proc to call a single stored proc that executes the SELECT statement and returns the resultset to the calling stored proc
The SELECT statement in question retrieves a single row from a table containing 10 columns.
Is there a way for a stored proc to call another stored proc and gain access to the resultset of the called stored proc?
I know about stored proc return values and about output parameters, but I think I am looking for something different.
I would like to know if the following is possible/permissible:
myCLRstoredproc (or some C# stored proc) { //call some T SQL stored procedure spSQL and get the result set here to work with
INSERT INTO #tmpCLR EXECUTE spSQL }
spSQL (
INSERT INTO #tmpABC EXECUTE spSQL2 )
spSQL2 ( // some other t-sql stored proc )
Can we do that? I know that doing this in SQL server would throw (nested EXECUTE not allowed). I dont want to go re-writing the spSQL in C# again, I just want to get whatever spSQL returns and then work with the result set to do row-level computations, thereby avoiding to use cursors in spSQL.
Hello, I'm using ASP.Net to update a table which include a lot of fields may be around 30 fields, I used stored procedure to update these fields. Unfortunatily I had to use a FormView to handle some TextBoxes and RadioButtonLists which are about 30 web controls. I 've built and tested my stored procedure, and it worked successfully thru the SQL Builder.The problem I faced that I have to define the variable in the stored procedure and define it again the code behind againALTER PROCEDURE dbo.UpdateItems ( @eName nvarchar, @ePRN nvarchar, @cID nvarchar, @eCC nvarchar,@sDate nvarchar,@eLOC nvarchar, @eTEL nvarchar, @ePhone nvarchar, @eMobile nvarchar, @q1 bit, @inMDDmn nvarchar, @inMDDyr nvarchar, @inMDDRetIns nvarchar, @outMDDmn nvarchar, @outMDDyr nvarchar, @outMDDRetIns nvarchar, @insNo nvarchar,@q2 bit, @qper2 nvarchar, @qplc2 nvarchar, @q3 bit, @qper3 nvarchar, @qplc3 nvarchar, @q4 bit, @qper4 nvarchar, @pic1 nvarchar, @pic2 nvarchar, @pic3 nvarchar, @esigdt nvarchar, @CCHName nvarchar, @CCHTitle nvarchar, @CCHsigdt nvarchar, @username nvarchar, @levent nvarchar, @eventdate nvarchar, @eventtime nvarchar ) AS UPDATE iTrnsSET eName = @eName, cID = @cID, eCC = @eCC, sDate = @sDate, eLOC = @eLOC, eTel = @eTEL, ePhone = @ePhone, eMobile = @eMobile, q1 = @q1, inMDDmn = @inMDDmn, inMDDyr = @inMDDyr, inMDDRetIns = @inMDDRetIns, outMDDmn = @outMDDmn, outMDDyr = @outMDDyr, outMDDRetIns = @outMDDRetIns, insNo = @insNo, q2 = @q2, qper2 = @qper2, qplc2 = @qplc2, q3 = @q3, qper3 = @qper3, qplc3 = @qplc3, q4 = @q4, qper4 = @qper4, pic1 = @pic1, pic2 = @pic2, pic3 = @pic3, esigdt = @esigdt, CCHName = @CCHName, CCHTitle = @CCHTitle, CCHsigdt = @CCHsigdt, username = @username, levent = @levent, eventdate = @eventdate, eventtime = @eventtime WHERE (ePRN = @ePRN) and the code behind which i have to write will be something like thiscmd.CommandType = CommandType.StoredProcedure; cmd.Parameters.AddWithValue("@eName", ((TextBox)FormView1.FindControl("TextBox1")).Text);cmd.Parameters.AddWithValue("@ePRN", ((TextBox)FormView1.FindControl("TextBox2")).Text); cmd.Parameters.AddWithValue("@cID", ((TextBox)FormView1.FindControl("TextBox3")).Text);cmd.Parameters.AddWithValue("@eCC", ((TextBox)FormView1.FindControl("TextBox4")).Text); ((TextBox)FormView1.FindControl("TextBox7")).Text = ((TextBox)FormView1.FindControl("TextBox7")).Text + ((TextBox)FormView1.FindControl("TextBox6")).Text + ((TextBox)FormView1.FindControl("TextBox5")).Text;cmd.Parameters.AddWithValue("@sDate", ((TextBox)FormView1.FindControl("TextBox7")).Text); cmd.Parameters.AddWithValue("@eLOC", ((TextBox)FormView1.FindControl("TextBox8")).Text);cmd.Parameters.AddWithValue("@eTel", ((TextBox)FormView1.FindControl("TextBox9")).Text); cmd.Parameters.AddWithValue("@ePhone", ((TextBox)FormView1.FindControl("TextBox10")).Text); cmd.Parameters.AddWithValue("@eMobile", ((TextBox)FormView1.FindControl("TextBox11")).Text); So is there any way to do it better than this way ?? Thank you
I am calling a stored procedure (say X) and from that stored procedure (i mean X) i want to call another stored procedure (say Y)asynchoronoulsy. Once stored procedure X is completed then i want to return execution to main program. In background, Stored procedure Y will contiue his work. Please let me know how to do that using SQL Server 2000 and ASP.NET 2.
Hi Peeps I have a SP that returns xml I have writen another stored proc in which I want to do something like this:Select FieldOne, FieldTwo, ( exec sp_that_returns_xml ( @a, @b) ), FieldThree from TableName But it seems that I cant call the proc from within a select. I have also tried declare @v xml set @v = exec sp_that_returns_xml ( @a, @b) But this again doesn't work I have tried changing the statements syntax i.e. brackets and no brackets etc..., The only way Ive got it to work is to create a temp table, insert the result from the xml proc into it and then set @v as a select from the temp table - Which to be frank is god awful way to do it. Any and all help appreciated. Kal
I didn't want to maintain similar/identical tables in a legacy FoxPro system and another system with SQL Server back end. Both systems are active, but some tables are shared.
Initially I was going to use a Linked Server to the FoxPro to pull the FP data when needed. This works. But, I've come up with what I believe is a better solution. Keep in mind that these tables are largely static - occassional changes, edits.
I will do a 1 time DTS from FP into SQL Server tables.
I then create INSERT and UPDATE triggers within FoxPro.
These triggers fire a stored procedure in FoxPro that establishes a connection to the SQL Server and fire the appropriate stored procedure on SQL Server to CREATE and/or UPDATE the corresponding table there.
In the end - the tables are local to both apps.
If the UPDATES or TRIGGERS fail I write to an error log - and in that rare case - I can manually fix. I could set it up to email me from within FoxPro as well if needed.
Here's the FoxPro and SQL Server code for reference for the Record Insert:
Im trying to perform an update with a stored procedure thats all working but an exception is thrown ....violation of primary key contraint....cannot insert duplicate pri key I understand whats going on but how do you update some ones details if its protected this way. ?
I have a stored procedure , where i want to return identity column after insert but before insert i want to check if the record exist then select its identity value to return , after select statement it is retutrning null CREATE PROCEDURE SP_Attendance1 (@DIVISIONID int,@EMPLOYEEID int,@CALLDATE datetime,@RECEIVEDDATE datetime,@DOC datetime,@SYSTEMNAME VARCHAR(20),@DELETED int,@attendanceID int output) AS---DECLARE @ID intIF EXISTS (SELECT ID FROM TBLATTENDANCE WHERE EMPLOYEEID = @EMPLOYEEID AND YEAR ( CALLDATE ) = YEAR ( @CALLDATE)AND MONTH (CALLDATE) = MONTH ( @CALLDATE) AND DAY (CALLDATE) = DAY ( @CALLDATE) )BEGIN SET @attendanceID = SCOPE_IDENTITY()END ELSE BEGIN INSERT INTO TBLATTENDANCE (DIVISIONID ,EMPLOYEEID ,CALLDATE , RECEIVEDDATE ,DOC,SYSTEMNAME ,DELETED )VALUES (@DIVISIONID ,@EMPLOYEEID ,@CALLDATE , @RECEIVEDDATE ,@DOC,@SYSTEMNAME ,@DELETED ) ;SELECT DIVISIONID, EMPLOYEEID, CALLDATE, RECEIVEDDATE, DOC, SYSTEMNAME, DELETED,ID FROM TBLATTENDANCE WHERE (ID = SCOPE_IDENTITY())SELECT @attendanceID = SCOPE_IDENTITY()ENDGO Kindly help with this
I am trying to create a stored proc, that delivers a recordset, per the user requirements BUT,
I want to create a Geneirc search Proc that can handle a few criteria
I was wondering if it is possible to create a VB like Select case depending on Information supplied to the stored proc
i.e @Loc_Thing @Loc_OtherThing
SELECT FirstName,LastName,CIty,Job,,Company,Webpage FROM RECORDSET WHERE Select case @Loc_Thing Case "Mickey" LastName = @Loc_OtherThing Case "Walt" Company = @Loc_OtherThing
...... etc
is it possible to create a strored proc like this? I have found a Select case in SQL, but it doesn't work I would like it? Any Idea's?
Hello, So I created my first SP today which returned data to populate a datagrid. Worked to perfection. Now I'm trying to do a simple login and I'm having a hard time getting it together. I want the user to enter in a username and pass then if user exists, to return their userid and update their last login date. But I can't get it. Any help would be awesome.
Here's my SP...
CREATE PROCEDURE [dbo].[userLogin] @username varchar(50), @pass varchar(50) AS
declare @x int declare @userid int
if exists (SELECT userid FROM users WHERE username = @username AND password = @pass) set @x = 1 else set @x = 0
if @x = 1 UPDATE users SET lastlogin = getdate() WHERE userid = (SELECT userid AS name FROM users WHERE username = @username AND password = @pass) else return '0'
if @x = 1 SET @userid = (SELECT userid FROM users WHERE username = @username AND password = @pass) return @userid GO
Any constructive criticism on my SP is welcome. Also, should I be using Print or Return if I want to send back a value to my VB code?
And my VB:
Dim user As String = txtUsername.Text Dim pass As String = txtPassword.Text Dim objDataSet As DataSet Dim objAdapter As SqlDataAdapter
Try Dim cmd As New SqlCommand
'Enter Param's here Dim myParam1 As SqlParameter = cmd.Parameters.Add("@username", SqlDbType.VarChar) Dim myParam2 As SqlParameter = cmd.Parameters.Add("@pass", SqlDbType.VarChar)
Dim str As String = cmd.Parameters("@userid").Value() cmd.ExecuteNonQuery() If str = "0" Then 'Error Login Page Response.Redirect("login_err.aspx") Else Session("userid") = str Response.Redirect("home.aspx") End If
Table2 has the same ID field and a date field which are both unique (PK, FK)
I need to write a stored procedure that will query the ID field from table1 like
Select distinct(id) from Table1
Would return:
ID
1
2
3
4
5
Now on the first of every month I want a job to run that would create a new record for EACH ID from the above query. The new record would be created in Table2 with the ID and a date (that I will determine), resulting in:
ID DATE
1 01/01/06
2 01/01/06
3 01/01/06
4 01/01/06
5 01/01/06
The following month, after running it again, the table would look like:
ID DATE
1 01/01/06
1 02/01/06
2 01/01/06
2 02/01/06
3 01/01/06
3 02/01/06
4 01/01/06
4 02/01/06
5 01/01/06
5 02/01/06
I have no idea how to “loop� through this record set for each record in Table1 and in turn insert into Table2.
