I am having trouble with the SSIS wizard results. The connections to source and destination test good, but when I execute a task to copy all tables from a hosted OLEDB to a local SQL native connection, I get this error:
Error 0xc0202049: Data Flow Task: Failure inserting into the read-only column "eventID".
(SQL Server Import and Export Wizard)
Error 0xc0202045: Data Flow Task: Column metadata validation failed.
(SQL Server Import and Export Wizard)
Error 0xc004706b: Data Flow Task: "component "Destination - diary" (25)" failed validation and returned validation status "VS_ISBROKEN".
(SQL Server Import and Export Wizard)
Error 0xc004700c: Data Flow Task: One or more component failed validation.
(SQL Server Import and Export Wizard)
Error 0xc0024107: Data Flow Task: There were errors during task validation.
(SQL Server Import and Export Wizard)
The actual table that it is trying to write to is empty. What might I need to do, in order to correct the situation?
I created a package that will, on it's very first step, create a temporary table that will be used throughout the package. In the final step I drop this table.
Running the package bit by bit works, however the moment I attempt to run the full package (or the container that holds the bulk of it) i get a validation error because the table does not exists.
Anyone knows how can I suppress this validation from occurring? I know the table wont exists until the package starts executing and it telling me it cant proceed because the table does not exists is preventing me from doing anything.
I am using the XML Task to validate an XML file against the XSD schema. Everything works fine, but about detailed errors in the case of the failed validation?
1) I specified €śOperationsResult€? Destination property to save the task execution outcome into a file. 2) Also, I turned on all possible events for logging.
Unfortunately, neither option produces a detailed validation error message. Option 1 saves one single word €śtrue€? or €śfalse€? to a file. Logging produces the following message: Task failed to validate "A validation error occurred when validating the instance document.".
As end result, it is impossible to pinpoint the problem with the xml file and, consequently, fix the issue.
The expected behavior should be a detailed error message like the following (produced by StylusStudio): file:///c:/temp/fafa/feed_bad.xml:12824,52: Datatype error: Type:InvalidDatatypeFacetException, Message:Value '244212' must be less than or equal to MaxInclusive '4'.
It shows a precise location of the error in the XML file plus the specific XSD rule which failed.
Any idea what could be done to get the detailed error message for the XML Task Validation?
I have a pretty easy data load and design of my package flow is like this : Excel -> Stage -> operational_table. So now everything is working fine and the operational table will be called for front end applications. So far so good.
Everything is truncate and load operation. Yesterday, my stage to operational table load failed because of truncation happened for a column.  Is there any way I can validate for errors and if at all there are any errors I wont truncate my operational table. I'm thinking of this way .. If  max(len(stage.column)) >   COL_LENGTH('operational table','[column]')Â
stop truncating operational table.. Is there any other better way or just above works fine?
I have a DTS package that I'm moving over to SSIS. In place of migrating this package, I've choosen to recreate it. This package moves data from an Informix database to a SQL database.
In the old package the first task was to make a simple connection to the Informix database and if the task failed, it would send an email and stop the package.
The biggest reason for this is because the Unix server that I'm getting the Informix data from forces the user passwords to be reset ever 90 days. So in my old package, if I forgot to change the password and the connection started to fail it would send me an email.
In my new package, SSIS performs a validation before starting. There are a number of task that uses the connection to the Informix database. Under testing, if I put in a bad password, the validation process generates a validation error. I've tried catching this validation error using the Error Handling events but I've had no luck. I can send out errors PreValidation and PostValidation but OnError appears not to fire under a validation error.
Might anyone have any suggestions on a proper way to validate and be able to send out email notification if a connection fails? Any assistance would be appreciated.
I have created a package which executes every 10 mins. Last week end for maintenance purpose, I shutdown my database. Now as an initial execution process, my package does the default validation steps on which the database connection validation step fails. As this is the default functionality of SSIS I am not able to capture this error. Is there anyway to capture this error inside SSIS Package?
I recently updated the datatype of a sproc parameter from bit to tinyint. When I executed the sproc with the updated parameters the sproc appeared to succeed and returned "1 row(s) affected" in the console. However, the update triggered by the sproc did not actually work.
The table column was a bit which only allows 0 or 1 and the sproc was passing a value of 2 so the table was rejecting this value. However, the sproc did not return an error and appeared to return success. So is there a way to configure the database or sproc to return an error message when this type of error occurs?
I have a parent package that calls child packages inside a For Each container. When I debug/run the parent package (from VS), I get the following error message: Warning: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
It appears to be failing while executing the child package. However, the logs (via the "progress" tab) for both the parent package and the child package show no errors other than the one listed above (and that shows in the parent package log). The child package appears to validate completely without error (all components are green and no error messages in the log). I turned on SSIS logging to a text file and see nothing in there either.
If I bump up the MaximumErrorCount in the parent package and in the Execute Package Task that calls the child package to 4 (to go one above the error count indicated in the message above), the whole thing executes sucessfully. I don't want to leave the Max Error Count set like this. Is there something I am missing? For example are there errors that do not get logged by default? I get some warnings, do a certain number of warnings equal an error?
Starwin writes "when i execute DBCC CHECKDB, DBCC CHECKCATALOG I reveived the following error. how to solve it?
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -2093955965, index ID 711, page ID (3:2530). The PageId in the page header = (34443:343146507). . . . . . . . .
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1635188736)' (object ID -1635188736). CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1600811521)' (object ID -1600811521).
. . . . . . . .
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -8748568, index ID 50307, page ID (3:2497). The PageId in the page header = (26707:762626875). Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -7615284, index ID 35836, page ID (3:2534). The PageId in the page heade"
I am working on a query application, and I want to do syntax validation before I submit the dynamically sql to the database. The expression will include ANDs, ORs, IN, (,),>,<,etc. Anyone done this already? any code snippets?
FROM SERVICE [ewx.co.za/Service/store001_ewx_sb_service]
TO SERVICE 'ewx.co.za/Service/ewx_sb_hub_service'
ON CONTRACT [ewx.co.za/Contract/ewx_Contract];
SET @msg = '<InventoryUpdate>
<TitleId>STORE001TEST1</TitleId>
<Quantity>7777</Quantity>
</InventoryUpdate>';
SEND ON CONVERSATION @h
MESSAGE TYPE [ewx.co.za/Message/ewx_sendmsg](@msg);
Now to test errors comming back on the aueue i sed to make the xml tags wrong, then the target would send a error back on the queue with xml validation failed (both queues have validation well_formed_xml). However now in testing i cannot even send the message i get an invalid xml error straight away, i am not sure why this is , i know the xml is not valid but the send used to work and i would get an erro rback, as the xml is validated by the ttarget, but this no longer works it ails strainght away, with no thing in any queue. What could be causing this ?
I think I have read online a recommendation about not using XML VALIDATION in a production environment, due to performance reasons. Is it recommended using other that NONE validation in production, and is there available documentation for a scale that grades performance hits for various types of validations?
Afternoon all,I want my SQL SP to do some validation on a form submit to do the following before committing to the table.If email address (txt.Email.Text) doesn't exist in the table, commit values.if email address (txt.Email.Text) does exist and option (radOptions.SelectedValue) equals 1, print message to say 'you're already subscribed'if email address (txt.Email.Text) does exist and option (radOptions.SelectedValue) equals 0, print message to say 'you're not subscribed'if email address (txt.Email.Text) does exist and option (radOptions.SelectedValue) equals 1 or 0, update row to 0 or 1 (depending on subscribe or unsubscribe - 1 = subscribed, 0 = unsubscribed) The simple SP is currently:ALTER procedure [dbo].[sp_customerSignups]@name varchar(50),@email varchar (50),@subscribed intasBEGININSERT INTO tblCustomerSignups(Name, EmailAddress, Subscribed)VALUES(@name, @email, @subscribed)END Does anyone have the correct syntax for this?Thanks,Brett
When I create and query the XML file using LINQ, everything works just fine. I also get no compilation errors. But when I try to add the XML file to a database-field of type xml(CONTENT dbo.Common7), I get following error: XML Validation: Declaration not found for element 'http://www.mycompany.com/xsd/PageTemplate:template'. Location: /*:template[1] Any ideas? Thanks,Thomas
I have a table of contact details containing the usual name, adresss etc fields.
I want to validate the fields Country and telephone together so that fopr example if country = 'UNITED KINGDOM' the telephone has to begin with +44 if it doesnt i want it to add the +44!
I can do this through writing a little program but just wanted to explore the possibility of doing this with SQL or functions already available with MSSQL Server
I need to make sure that a string contains at least one number, at least one letter and has no repeating chars. Anyone done something similar? What's the best way to do it? Thanks.
Can anybody help me to write a procedure to validate a given string like 09461020(Y2K compliant date), I need to check wether this is a valida date or not?? 0946 = should convert to 1946 10 = month 20 is the date.
If it is 20461020.....then year = 2046, month = 10 and day = 20..and it is valid.
procedure should return validate date or not ...return TRUE OR FALSE.
Is there a way in TSQL to validate a string to ensure it has only numbers or letters (no special characters like @,%, etc)?
I want to write a function that validates a number that should only contain letters and numbers. The function should return 1 if valid 0 if not. If it contains anything other than 0-9 or A-Z or a-z then it should return 0.
Any ideas on how to do this in TSQL? I could do this in C# easily with regular expressions, but I don't want to use SQLCLR or any other external resource like that...just straight TSQL.
I'm sorry to repost this, but I didn't get an answer yet for this seemingly simple issue. I need to make sure that an email address has the @ symbol before I insert it from one table to another. Does anyone know the syntax? What I have that isn't working is -
select * from table where email charindex ('@',email) > 0
I'm looking a cripts/code that will validate date in my form when the user key in date. The date has to be in the following format 00/00/0000 (month/ day/ year)
select * from empmaster emp.no fromdate todate ---------------------------------- E3/13/20074/7/2007 E4/13/20076/13/2007
i am going to pass some date for example 5/20/2007.
so i have to compare this 5/20/2007 which lies in between 3/13/20074/7/2007 or 4/13/20076/13/2007.if means i have to print not allowed other wise allowed. and the date should not be less(if 2/10/2007). like thi i have many from date and todate in my table. if i give 7/20/2007 means it should print allowed becos it doesnot falls in between any date o the emp.no=e. this should be depent on the emp.no also.
so please help me to do this.please show me query for this.or spc
Hi guys I am fairly new to t-sql. I am sure there are SPs or scripts that I can use to create a procedure that will do the data validation in the staging table...
Client send us data and often some of the records have bad values... what i have to create is a process that will check for those values and update a flag in the staging table for each column if the data is not valid....
Please help me out if you have something that can be used for this.
I have a package that runs fine in BIDS, however fails when run in a job with the following error: "The Validate method must succeed and indicate the result using an "out" parameter".
The task it is failing on is a third party FTP task that uses expressions for the filesource and filedestination and username. I have set delay validation on for this task, yet it still seems that it is trying to validate it.
I have one data flow task which creating a database table (tempTable) and other task will migrate data from other database into this table. Now I add third task which will read the data from this tempTable. If tempTable is not in the database, then validation will failed. Is there a way to turn off validation at runtime. In my case, my package running every night. I would like to delete this tempTable at end of package run. Now I have to pre create this temp table, and run package and leave the temptable around for the next run to pass validation problem.
Hi, I'm adding a field from a staging database into a mart database which is built using SSIS. I've added the field with relevant lookups (the field is called Business) but I am getting the following error from the Source Load Task:
Error 2 Validation error. DFT Load Vacancy: MI Stage Vacancy Source [1]: The output column "Business" (6336) on the non-error output has no corresponding output column on the error output. Vacancy.dtsx 0 0
The thing is, I've looked and it DOES have a corresponding output column on the error output. Is there something I'm missing here?
Hi, Anyone can help me on this? I am using MS SQL 2005 Express Edition. When I am installing my 3rd party software that needs to connect to the database, i get this error . Thanks.
Validation failed: 1. No mdb connection. 2. No Microsoft SQL server connection. 3. Microsoft SQL Server collation is not valid. 4. Microsoft SQL server authentication is not valid.
The thing that it is happening is that when i run a report without that CustBirth field i get an error stating that it cant convert the string "//" to date, of course it can't that is why i made the iif, how can i tell it to just try to execute the datediff when the field has the lenght bigger then 10 chars?
We run the same package day in and day out. So we want to turn off validation, which consumes around 30% of the package run time. Since the data source and destinations are known to be correct, we dont need validation and want to save this unnecessary step every time.
Anyone can help me on this? I am using MS SQL 2005 Express Edition. When I am installing my 3rd party software that needs to connect to the database, i get this error . Thanks.
Validation failed: 1. No mdb connection. 2. No Microsoft SQL server connection. 3. Microsoft SQL Server collation is not valid. 4. Microsoft SQL server authentication is not valid.
I created a XML SCHEMA and MESSAGE TYPE with VALIDATION = VALID_XML WITH SCHEMA COLLECTION.
I thought this would validate the message send with the schema. but when I try to send the message with a different xml, the message is send. there were no errors. Is there something I did not set?
Is it possible to create a server side or client side validation for parameter inputs? For example, I want a calender input to error when a user tries to put in a date past the current date time
