Sales table
Field
Type
salesidint(11)
fidint(11)
fsdatevarchar(10)
quantityint(11)
eidint(100)
employee table
Field
Type
eidint(100)
fnamechar(100)
lnamechar(100)
dobvarchar(100)
genderchar(100)
addressvarchar(100)
statuschar(100)
contactint(100)
emailidvarchar(100)
salaryint(100)
select f.furniturename as furniturename,f.quantity as tquantity,s.quantity as squantity,e.fname as fname,e.lname as lname from furnitures f inner join sales s inner join employee e on s.fid=f.fid and e.eid=s.eid";
furniture Name Total Quantity Sales quantity Remaining Quantity person
book rack 40 2 roshan shri
book rack 40 3 roshan shri
It displays 2 records , but it should display in 1 record.output should be like this
I have a table which uses multiple joins to create another table but it turns out that the effective_date which is used in the join to match row together does not work all the time since some of the dates for the effective date column are out of sync meaning records that show data as missing even when the other table contains the data. I try the SQL script below but it returning 6 rows instead of 3–
I'm not sure why the numbers aren't being used as ints, all the examples I've found says this works...I appreciate any suggestions.products = trim(request.form("products")) response.Write("prods [" & products&"]") produces the output...prods [423,424,174] however, when i try and pass this to sql server 7 from asp, i get the following error (if i use query analyzer it works fine.) Microsoft OLE DB Provider for ODBC Drivers error '80040e07' [Microsoft][ODBC SQL Server Driver][SQL Server]Error converting data type varchar to int. cmd.Parameters.Append cmd.CreateParameter("@prods",adVarChar,adParamInput,255,products) conn.open cmd.ActiveConnection=conn cmd.Execute 'ERROR ON THIS LINE, SO HELPFUL!SP: @prods nvarchar(255) --paramSET @sql=@sql+' WHERE id in ('+@prods+')' --i've tried with the parens and without
I am retrieving data from an AS400. I used the import data utility to pull the data in initially and to create the table for the data in SQL server. There are a couple of text fields that represent dates in the data I imported.
The Import data utility imported these fields as character data. That was fine by me.
Now, when I pull new data from the same AS400 data source I have to use the Data Reader source (due to the OLEDB components not being able to work with an SQL command;i,e, it works okay when pulling the entire table but does not work at all with even the simplest of sql statements). The data reader source insists on interpreting the text fields containing date data from the AS400 as DB_DATETIMESTAMP data type. The net effect of this is that the data it pulls in in the DB_DATETIMESTAMP format is too large to fit into the 10 character varchar field that was created when the entire table was imported.
I know I can get around this in a couple of ways. But, my question is this. Why will the DateReader source not let me specify how I want the incoming data to be interpreted? There seems to be no way to change the way the external column is interpreted. By this I mean that I can change the external columns representation on the datareader source to indicate that I want it treated as a 10 character text field but I cannot change the output column representation. When I try to do so I get an error message telling me the data type of the output columns on the component datareader source cannot be changed. It seems a bit odd to me that character data coming in cannot be treated as character data in output.
It looks like I will need to use a script component to force the data conversion that I want and it just doesn't make a lot of sense to me as to why I can't do what I need to do in a conversion component.
I would feel better if I could understand what is going on behind the scenes that makes this state of affairs desirable.
Server: Msg 8908, Level 22, State 6, on index defragmentation on a table.
Table error: Database ID 490, object ID 517576882, index ID 0. Chain linkage mismatch. (1:13020)->next = (1:13021), but (1:13021)->prev = (1:13080).
from error.log found corresponding error on dbcc checkdatabase on this same database: I/O error (bad page ID) detected during read at offset 0x00000006614000 in file 'T:DataABCABC_data.mdf'.. Waiting for type 0x4, current count 0x100022, current owning EC 0x76A85540. Error: 823, Severity: 24, State: 2
is there a way to fix this chain linkage mismatch error? thanks -D
I've changed the width of a column from 128 to 64. How to EM shows 64, while sysobjects and sp_help show 128 ?? Even after disconnecting and re-connecting (just to be extra sure).
I have been throwing these lovely errors on my db (approx 16Gb) all of a sudden - they might all be related:
1) Operations Manager Critical Error Alert Severity: Critical Error Status: New Source: MSSQLSERVER Name: Attempt to fetch logical page belongs to different object . Description: Error: 605, Severity: 21, State: 1 Attempt to fetch logical page (4:1878339) in database 'NGProd' belongs to object 'claim_requests', not to object 'Assessment_'.
2) Event Description: Error: 644, Severity: 21, State: 5 Could not find the index entry for RID '36303030318eefd3713d52f4a85df3b0b8a889904e4e608102703230303530393139' in index page (3:271543), index ID 9, database 'NGProd'.
3) Event Description: Error: 8908, Severity: 22, State: 6 Table error: Database ID 10, object ID 86095893, index ID 0. Chain linkage mismatch. (4:1880687)->next = (4:441596), but (4:441596)->prev = (4:441595)
dbcc checkdb gives me 0 errors & running the built-in integrity reports does not seem to find anything.
I have been told that my db has "cracks" in it, and that I need to export ALL of it and then re-import. Seems a bit too much work...
Anyone have any ideas on what I should first attempt to do? I don't even know how to fix these errors... seems that I only throw then when users are accessing specific records.
I have a problem using 3 tables. The first recordset is my own invention (that means a very simple one). It reads product features from a table:
Set Rsx = Server.CreateObject("ADODB.RecordSet") sSQL= "SELECT * from prodfeatures" Rsx.Open sSQL, sDSN, adOpenStatic, adLockReadOnly, adCmdText
'then I read the recordset into arrays like this:
While Not Rsx.eof i=i+1 mte(i)=Rsx("id") ' every id has a corresponding featurename mfnavn(mte(i))=Rsx("featurename") Rsx.movenext Wend
'this part works very well
Now comes the difficult part that the SQLTeam figured out (this combines an order base with an itemorder base):
Set Rs = Server.CreateObject("ADODB.RecordSet") sSQL="select oitems.catalogid,oitems.features, sum(oitems.numitems) as SumOfItems from oitems Inner Join Orders On Orders.orderid = oitems.orderid Where Orders.oshippeddate =" & dDate & " AND Orders.orderid <> 1 group by oitems.catalogid,oitems.features" Rs.Open sSQL, sDSN, adOpenStatic, adLockReadOnly, adCmdText
'Then I write the content of the products with product features - the complexity of the sql is due to a use of many other operations:
While Not Rs.eof response.write Rs("catalogid") & "features:" & Rs("features") & "Name:" & mfnavn(rs("features")) Rs.movenext Wend
The query runs, and starts well, writing 3 lines:
239 features:221 Name:Standard bil max 5m lang og 1,9 m høy 240 features:270 Name:Liggestol (gratis) 240 features:271 Name:C1 Enkeltseng i delt lugar u. bildekk. Kun vask
but it is then aborted with this message:
Microsoft VBScript runtime error '800a000d' Type mismatch: 'Rs(...)' I know that the problematic part is the array mfnavn(rs("features")) ...anyone with experience in this?
HelloMY SQL Server is causing me this problem :Microsoft VBScript runtime error '800a000d'Type mismatch: 'ident'[color=blue][color=green][color=darkred]>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>[/color][/color][/color]I am getting from the table datingnew the value of the ident field."select max(ident)as test from datingnew"ident = RS2("test")ident = ident + 1The ident value is passed over 2 sites by hidden form value. There I amsimpy trying to insert it again in the same table datingnew.[color=blue][color=green][color=darkred]>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>[/color][/color][/color]query = "INSERT INTO datingnew(ident,....,registerdate)"query = query & " VALUES ('" & ident & "', '" & .... & "', '" ®isterdate & "')"there the error message is comeing each time :[color=blue][color=green][color=darkred]>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>[/color][/color][/color]Microsoft VBScript runtime error '800a000d'Type mismatch: 'ident'[color=blue][color=green][color=darkred]>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>[/color][/color][/color]I have tried to change the the type of ident in the table datingnew tointeger , nvarchar, ....Tried to close the recordset each time with db.close, RS. close.Changed the ident field to standard, but also to with and withoutduplication, didnt help so far ...Need helpkind regards ArunMicrosoft VBScript runtime error '800a000d'Type mismatch: 'ident'
Getting this error after installing certificate. Happens when trying to access https://machinename/reports
Possible SOAP version mismatch: Envelope namespace http://schemas.xmlsoap.org/wsdl/ was unexpected. Expecting http://schemas.xmlsoap.org/soap/envelope/. SQL Server Reporting Services 2005 on Windows Server 2003 R2.
I am exporting my sql table to the access database. My text fileds in SQL are stored as varchar(50) in SQL server 2005. but when I export the table to Access, These fileds get converted to 'memo' fields. I tried converting these memo fields in access to text field but Access does do that, throws an error message saying not enough disk space.
When I try to convert these 'varchar' fields in sql to text fileds, sql throws a 'time out ' message nad does not convert it to text.
I am developing an application to mail the Newsletters on a daily basis with Service Broker . I have a peculiar problem, that the queues associated with same dialog is giving different conversation handles. I'm testing the application with one mail at a time, i.e., there are not more than one item in both the queue at one point of time. But the handles returned by the queues are different within the same conversation.
Why it is happening like that ? I have taken backup of the original database and restored with a different name in the same instance (and will run "ALTER DATABASE db_name SET NEW_BROKER" for the new database) for some purpose. Can it cause problem ?
Hi, Create Table tb_mismatch (x int) Create Procedure proc_mismatch as begin insert into tb_mismatch values('s') if @@error<>0 begin print ' entered error loop' end print 'successfully exited' end exec proc_mismatch --executing the proc Now, when i try to capture the above error its not getting trapped..its directly going to the final end statement. I have even tried calling subprocedures so that it comes out of the inner procedure and by some means i can move forward in the outer proc,but even that failed. The proc. is able to capture all the other errors like primary key violation,binary data truncated etc but not the datatype mismatch error (mainly int with varchar...) any ideas are highly appreciated. Thanks & regards, Pavan.
Recently I have been getting a barrage of errors such as:
DESCRIPTION:Error: 8908, Severity: 22, State: 6 Table error: Database ID 16, object ID 1893581784, index ID 2. Chain linkage mismatch. (1:17214)->next = (1:17060), but (1:17060)->prev = (3:178).
and
DESCRIPTION:Error: 605, Severity: 21, State: 1 Attempt to fetch logical page (1:164756) in database 'Clients' belongs to object 'activities', not to object 'entity_address_check'.
The problem began to originally manifest itself with a couple errors similar to:
DESCRIPTION:Error: 605, Severity: 21, State: 1 Attempt to fetch logical page (1:4930) in database 'tempdb' belongs to object '1732152167', not to object '#allrowstable____________________________________ __________________________________________________ _________________000100003472'.
So far all of the errors have been isolated to indexes and I have been able to repair the problems with CHECKDB fast_rebuild or by dropping the index that is causing the error and recreating it. At times the errors will appear for a couple hours overnight and then resolve themselves before the morning. Originally the problem began to appear on a single SQL Servers and now appears daily on all three SQL Servers.
We've investigated whether the NOLOCK optimizer was the culprit but out of all of our views and procedures there was nothing compiled with that optimizer in any of the databases, so this seems an unlikely cause (SEE http://support.microsoft.com/default.aspx?scid=kb%3Ben-us%3B308886 )
We've reviewed IO on the servers, and nothing appears out of the ordinary. We have even checked into the possibility of unreport IO errors (SEE http://support.microsoft.com/default.aspx?scid=kb;en-us;826433&Product=sql2k ) but this still is inconclusive. HP did admit that their disc array is not fully compatible with W2K Adv Server SP3, but the problem only recently appeared and the upgrade to SP3 was completed nearly 2 months ago.
We are running SQL Server 2000 EE, SP3 build 2195 on Windows 2000 Advanced Server. The server is setup as an A/P cluster on 2 HP Proliant servers with a HP HTA200 disc array.
If anyone has any insight or suggestions, it would be great to hear them.
This is my first time solving replication problem for me.Do help me out.
We have two servers A [Publisher] and B [Subscriber]. Today users complained there is data mismatch.I just did a Select Top 10 records from both A & B, and there is differences in the records.I have to fix this problem by today.What are the steps I should take to find the
Validate the mismatch records? Sync both tables ? Ensure Mismatch does not happend in future?
There is no error mssg that indicate's failure of replication
I'm getting a type mismatch error on the mid(strRecord,1,1)="H" line. Iused to do this all of the time, but I haven't done any VBScript forawhile, so I'm sure I'm forgetting something.While not objResults.EOFstrRecord=String( 333 ,32 )IF TicketID<>objResults.Fields("ticket").Value thenMid(strRecord,1,1)="H"mid(strRecord,2,5)=objResults.Fields("cust").Value 'custmid(strRecord,7,30)=objResults.Fields("ship1").Value 'ship1mid(strRecord,37,30)=objResults.Fields("ship2").Value 'ship2mid(strRecord,67,30)=objResults.Fields("ship3").Value 'ship3elsemid(strRecord,1,1)="D"END IFobjStream.WriteLine(strRecord)TicketID=objResults.Fields("ticket").ValueobjResults.MovenextWend
I have a client who has reported a discrepancy in their database. Intheir test database a certain report returns 5,333 rows, but in theproduction database it returns 5, 332 rows.I'll get to the bottom of it in due course, but I came across anoddity. I wanted to know how many rows there were in a particulartable on both databases so I wrote:SELECT COUNT(*) AS NumRows FROM AnswerIt returned 1,919,456. However, if I click on the Answer table inEnterprise Manager and select Properties it tells me that there are1,919,421 rows. I've tried doing a refresh but it didn't work.The thing is that the database is pretty static - in fact there's beenno activity (apart from me examining it) for a couple of days.Thoughts?Edward
Hi All, I am moving some numerical data from SQL server to excel. After the data is moved, i am getting green flag in excel cell to which the data is moved. I have configured the excel column to accept only numbers, but still i am getting green flag in excel cells. When i click the cell i am getting this message "The number in the cell is formatted as text or preceded by a apostrophe"
I m working on event organizer website,its running ASP pages on windows 2003 server with SQL server 2000. I have upgraded SP2 for SQL server to SP4 in maintance process.
The problem accur with some ASP pages are
server_errors [server_Errors] GetErrorMessage [serverSERVER version 1.0.0] error '800a03eb' Type mismatch
/server/asp/cmfls/errorconfirmation.asp, line
There may be permission /security issues related with database.help me to troubleshoot my problem.
I have a data flow that is updating an Access database using an OLD DB Command control. I am getting this error and have narrowed it down to a column the Access table called CreateDate. I don't think this is a reserved word, but even surrounding it in [] did not resolve the problem. The column from SQL Server is called order_date and is a datetime and the destination column createdate is a datetime in Access. When I remove this column fromt he insert command, it works fine but when included, it gives the data type mismatch on criteria error. Any ideas?
"UNION " & _ "SELECT p.ProductID, p.ProductTitle FROM Product p " & _ "WHERE (p.Price > '" & FormatCurrency(lowestPrice, 2) & "' AND p.Price < '" & FormatCurrency(highestPrice, 2) & "') " & _ "ORDER BY p.ProductTitle"
I don't know where the error goes wrong in here.. previously because of the union missing one spacing that resulted in syntax error, after i inserted a space to it.. it shows me Data type mismatch the criteria expression. Is it because in my sql coding i cant use FormatCurrency for ASP.net? please give me a hand.. thank you
Contact me at: ryuichi_ogata86@hotmail.com ICQ me at: 18750757
I am programatically loading a template DTS package that imports a text file to SQL Server. I change the properties (source, destination, ...), SaveAs to a new name, and then SaveToSQLServer. The package itself is good, I can programatically execute it and it works, but when it gets saved to SQL Server someting gets corrupted. When I try to open the package or manually execute it, I get a DTS Package error w/Description: Type mismatch. This problem is not constant. Sometimes dozens of packages can be programatically "Saved as" with not even one being corrupted. Currently, I am unable to get a single one to be successful.
This is a big problem for me because the package gets programatically scheduled to a Job in SQL Agent. I have placed the DTS "save as" creation into a loop that loads it and checks for an error. If the error occurs, it is removed from SQL Server and recreated. My loop is currently running forever instead of for seconds.
I am trying to declare a global variable in a DTS package for passing the recordset to the next stage Active Script . After declaration of the Global Variable and selecting datatype of the variable as OTHER ( Variant ) , when I try to save the DTS Package changes , it throws a Type Mismatch Error .
I am new to SQL programming and I am trying to figure out how to get a report to show a mismatch in System Names & DNS Names. Both of the columns are in a table called nodes.
System Name router-1-dc and the DNS would be router-1-dc.domain I am trying to find Nodes that don't match to the "." prior to the domain example for this would be System Name "router-1-datacenter" and DNS Name "router-1-dc.domain" I would want this example to show on the report page.
Here is the SQL Query I built however it does not appear to be working as I need it too.
SELECT N. NodeID, N.Caption, N.SysName, N.DNS, N.IP_Address, N.Device_Type FROM ( SELECT Nodes.NodeID, Nodes.Caption, Nodes.SysName, Nodes.DNS, Nodes.Device_Type, Nodes.IP_Address FROM Nodes
I am getting a type mismatch error when I do a bulk insert.---Begin Error Msg---Server: Msg 4864, Level 16, State 1, Line 1Bulk insert data conversion error (type mismatch) for row 1, column 14(STDCOST).---End Error Msg---The STDCOST is set to decimal (28,14) and is a formatted in Access as anumber, single with 14 decimal. I don't know why I would be getting a TypeMismatch error.Any idea?Mike
When using the MS SQL 2005 JDBC driver, I now need to have the DNS nameresolution to the client correctly set up. If not I get the followingerror:SQLState: 08S01SQLError: 0Message: hostname : hostnameWhere "hostname" is the client host name. It doesn't seem to matter ifIuse an IP address or hostname in my connection URL. When searching thenet,I have seen a similar error, but not exactly the same, where themessage is"Hostname: hostname not found" (once again, here "hostname" is theclientmachine) where they suggested the issue was the DNS name conflict.I found the error goes away if the client machine's hostname match theDNSname used for the same IP addess that the DB server is using. Onework-around is to set hostname on the client to the IP address beingused.I know the right thing to do is set the hostname and the DNS namelookup thesame, but I have a customer who doesn't want to do this. They didn'thave tofor 2003, and they don't want to for 2005. Sigh. Is there a way todisablethis feature?
Error Type: Microsoft OLE DB Provider for ODBC Drivers (0x80040E07) [Microsoft][ODBC Microsoft Access Driver] Data type mismatch in criteria expression. /advice generation/testdateprint.asp, line 371
