Value Of A Readonly Property Of Custom Task Is Not Updated In Property Window
Apr 17, 2008
Hi,
I developed a simple custom control flow component which has several read/write properties and one readonly property (lets call it ROP) whichs Get method simple returns the value of a private variable (VAR as string). In the Execute method the VAR has a value assigened. When I put the value of ROP or VAR into MsgBox I can see the correct value. However when I execute the component I can not see the value of the ROP in the property window. I see the property but its value is empty string. For example when I put a breakpoint to postexecute or check the property before click OK in a MsgBox I would expect that the property value would be updated in SSIS as well. Is there a way how to display correct values of custom tasks properties in property window?
Thanks for any hints.
View 3 Replies
ADVERTISEMENT
May 20, 2007
Is there any way to provide a readonly custom property in the ProvideComponentProperties() method of a custom PipelineComponent implementation?
View 7 Replies
View Related
Apr 15, 2005
I am importing data from xls file to a db table with a dts. In the time of the dts creation I am using 'Transform Data Task Properties' GUI window to map incoming xls fields (source) to the table columns (destination).
Question: Is there any way to invoke the 'Transform Data Task Property' GUI window in dts runtime and use it to change the mapping dynamically in the run time?
Thanks, Vadim.
View 3 Replies
View Related
Jul 5, 2007
I wrote a custom task following the outline on MSDN. I signed it and installed it into the Tasks folder and in the GAC.
When I go to an SSIS project and add my task, the properties window shows "Could not get value for property 'd61935d9-430b-4c93-9f3e-a29f720d8659'. Specified cast is not valid." (where the guid is different obviously) for many of the properties.
What have I done wrong?
Update: I know this isn't my code because I tried a simple task that just returns success and doesn't do anything. I get the exact same errors, so I must be installing it incorrectly.
View 3 Replies
View Related
Aug 16, 2006
I am writing a custom task that has some custom properties. I would like to parameterize these properties i.e. read from a varaible, so I can change these variables from a config file during runtime.
I read the documentation and it says if we set the ExpressionType to CPET_NOTIFY, it should work, but it does not seem to work. Not sure if I am missing anything. Can someone please help me?
This is what I did in the custom task
customProperty.ExpressionType = DTSCustomPropertyExpressionType.CPET_NOTIFY;
In the Editor of my custom task, under custom properties section, I expected a button with 3 dots, to click & pop-up so we can specify the expression or at least so it evaluates the variables if we give @[User::VaraibleName]
Any help on this will be very much appreciated.
Thanks
View 3 Replies
View Related
May 2, 2008
Hi Folks,
I have a task I wrote which does not always update the property value (as seen in the properties pane)
Basically, change something on the form, then update the task host property with:
this.taskHostValue.Properties["Duration"].SetValue(this.taskHostValue, Convert.ToInt32(spnDuration.Value));
Stepping through this, it does exactly what it is supposed to. Having a look at the property value, it confirms it has changed.
Reopening the UI and resetting all the controls returns the expected results.
The package however does not realise it has changed. There is no * next to the package name in the top tabs.
As long as the package thinks it is unchanged, SaveXML does not get called either so the tasks do not persist.
Changing the value on the properties pane works fine though.
The frustrating thing is this is slightly random. Slight in the sense that sometimes it works but most of the time it does not.
The sample code I used was the MS download IncrementTask (Which works BTW) so I can't see it as being a VS / SSIS bug but rather something I am / am not doing. 3 tasks I have written all behave the same. I have to "nudge" them before savign the package.
Any ideas what the problem might be?
TIA
Cheers,
Crispin
View 3 Replies
View Related
Sep 21, 2006
We have a built a custom control flow task that we use frequently. It has a simple user interface form where we can set certain properties. Problem is, after I configure it once and then copy and paste it all of the internal property settings seem to be lost on the newly pasted task. When I open up the editor for the task all of the properties are displayed visually in the editor form, but the properties pane is empty.
How can this be corrected?
View 3 Replies
View Related
Jul 6, 2007
HI,
I need to open a File through File connection manager and want to assign these file properties to SSIS precreated varibale or Newly created varibale. I want to show file properties in Propertygrid. Properties grid will conatin File Propeties Column and SSIS varibale Combobox column. The combo box will contain New variable field. When user select New Variable field, then a new SSIS varibale window will open and we can able create New variable and that Newly created variable should add to that property comboBox.
For Instance if we create a new varibale Name "Creationdate" by clicking on New Varible in ComboBox, then that CreationDate variable should add to Property ComboBox in PropertyGrid. After adding when we select that variable Name "Creationdate" then that selected file Creation date should assign to SSIS varibale "Creationdate" field.
Any Comments or sample will help me.
Nitin
View 2 Replies
View Related
Apr 2, 2007
Hi,
I'm trying to enable Expression for a custom property in my custom data flow component.
Here is the code I wrote to declare the custom property:
public override void ProvideComponentProperties()
{
ComponentMetaData.RuntimeConnectionCollection.RemoveAll();
RemoveAllInputsOutputsAndCustomProperties();
IDTSCustomProperty90 prop = ComponentMetaData.CustomPropertyCollection.New();
prop.Name = "MyProperty";
prop.Description = "My property description";
prop.Value = string.Empty;
prop.ExpressionType = DTSCustomPropertyExpressionType.CPET_NOTIFY;
...
}
In design mode, I can assign an expression to my custom property, but it get evaluated in design mode and not in runtime
Here is my expression (a file name based on a date contained in a user variable):
"DB" + (DT_WSTR, 4)YEAR( @[User::varCurrentDate] ) + RIGHT( "0" + (DT_WSTR, 2)MONTH( @[User::varCurrentDate] ), 2 ) + "\" + (DT_WSTR, 4)YEAR( @[User::varCurrentDate] ) + RIGHT( "0" + (DT_WSTR, 2)MONTH( @[User::varCurrentDate] ), 2 ) + ".VER"
@[User::varCurrentDate] is a DateTime variable and is assign to 0 at design time
So the expression is evaluated as: "DB189912189912.VER".
My package contains 2 data flow.
At runtime,
The first one is responsible to set a valid date in @[User::varCurrentDate] variable. (the date is 2007-01-15)
The second one contains my custom data flow component with my custom property that was set to an expression at design time
When my component get executed, my custom property value is still "DB189912189912.VER" and I expected "DB200701200701.VER"
Any idea ?
View 5 Replies
View Related
Jun 16, 2006
I am having problems exporting data into a flat file using specific code page. My application has a variable "User::CodePage" that stores code page value (936, 950, 1252, etc) based on the data source. This variable is assigned to the CodePage property of desitnation file connection using Property expression.
But, when I execute the package, the CodePage property of the Destination file connection defaults to the initial value that was set for "User:CodePage" variable in design mode. I checked the value within the variable during runtime and it changes correctly for each data source. But, the property of the destinatin file connection doesn't change and results in an error.
[Flat File Destination [473]] Error: Data conversion failed. The data conversion for column "Column01" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
[DTS.Pipeline] Error: The ProcessInput method on component "Flat File Destination" (473) failed with error code 0xC02020A0. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
If I manually update the variable with correct code page and re-run the ETL, everything works fine. Just that it doesn't work during run-time mode.
Can someone please help me resolve this.
Thanks much.
View 5 Replies
View Related
Jan 26, 2008
sir
I have got this error message to establish connction with recordset vb .net, Can you please rectify this
Too many arguments to 'Public Overridable ReadOnly Default Property Fields() As ADODB.Fields'
my code like this
rs = New ADODB.Recordset
rs.Open("Select * from UserLogin where userid='" & txtUserName.Text & "'", gstrDB, DB.CursorTypeEnum.adOpenStatic)
If txtUserName.Text = rs.Fields.Append(userid) Then
MsgBox("OK", MsgBoxStyle.OKOnly, "Confirmation")
End If
thanks
View 1 Replies
View Related
Aug 17, 2005
What I want to accomplish is that at design time the designer can enter a value for some custom property on my custom task and that this value is accessed at executing time.
View 10 Replies
View Related
May 7, 2008
Untill recently I had a smooth running SSIS package,but suddenly it throws error syaing
"OnError,,,,,,,The result of the expression
"@[User:trTextFileImpDirectory] +"SomeTextStringHere"+ @[User:trANTTextFileName] +(DT_STR,30,1252) @[User:taging_Date_Key]+ "SomeTextStringHere"
" on property "ConnectionString" cannot be written to the property. The expression was evaluated, but cannot be set on the property."
I have child SSIS package running under a parent package (through execute package task)
I have few flat file connection managers in child package for text file import , in which I am building text file path dynamically at run time by assigning an expression in connection string property of connection manager.
The Expression is as follows
"@[User:trTextFileImpDirectory] +"SomeTextStringHere."+ @[User:trANTTextFileName] +(DT_STR,30,1252) @[User:taging_Date_Key]+ +"SomeTextStringHere"
Where @[User:trTextFileImpDirectory] is a variable which contains path of directory containg text
files.Value in this variable is assigned at runtime from parent package's variable,which in turns fetch
value from a configuration file on local server.
With my current configuration this path has been configured to some other server's directory over network ( I.e my package picks text files from some other servers folder over network)
While
"Some string here"+ @[User:trANTTextFileName]" part of file name string.
(DT_STR,30,1252) @[User:taging_Date_Key] Contain the date of processing ,value in this variable is also picked up at run time from parent package variable.
1) So can someone give me some insight into possible reason of failures.
2) Is it possible that problem arises if directory (from which I m picking text files) is assigned password or is there exist some problem in accessing forlders over network ?
3) Or there can be some problem in package configuration at design time( I.e where I m assigning value in variable from parent package vriables)?
View 10 Replies
View Related
May 16, 2007
Here's a weird one:
We are setting up a job for the SQL Server Agent via SSMS. The Job Step Type is SSIS.
In the Job Step Properties window, on the Set values tab, you can enter Values to override your package variables - normally all well and good.
However in this particular case, the variable Value contains semicolons ( - it is a Connection String for an ODBC driver. Eg: Driver={Client Access ODBC Driver (32-bit)};system=MYSERVER;...
The behaviour for this Value is weird:
If the Value is not surrounded with double quotes ("), the job fails with "The command line parameters are invalid."
If the Value is surrounded with double quotes ("), the job will run as intended. The catch is: that entry and any subsequent "Set Values" entries disappear next time the Job Step Properties window is opened.
This looks like a bug with the parsing of those strings by the Job Step Properties window?
Or am I missing something?
Mike
View 5 Replies
View Related
Oct 18, 2006
I have a custom transform, with a custom property of value 1. My question is, can I change that value during runtime with the value from a variable?
Thanks
View 6 Replies
View Related
Apr 11, 2008
Hi all,
I'm wondering if anyone's accomplished this before - I've been unable to find a whiff of info on how to do this so far.
I'm creating a custom component that I'd like to give a "Derived Column" type of ability to. By that, I mean I'd like to populate a property of my component with an expression (including references to input columns, package variables and functions) and be able to evaluate it at runtime - per row processed by the component.
I would also appreciate any information as to how to provide the interface to allow the user to build such an expression as well - is there a UI function in SSIS I can call to pop up the "expression builder"?
Thanks!
View 6 Replies
View Related
Apr 21, 2006
I'd like to be able to hold onto lineageIDs in a list in the custom property of an output object. I found that I can really only easily use an array which is fine but now that I have coded it I cannot set any of the array values programatically. I can't even initialize the array the way I want it. I also cannot change the value in the debugger, it just pops back to zero.
Am I missing something? Here's how I'm trying to do it:
IDTSCustomProperty90 linIDsProperty = output.CustomPropertyCollection.New();
linIDsProperty.Name = "KeyColumnLineageIDs";
linIDsProperty.Value = new int[MAX_KEY_COLS];
for (int i = 0; i < ((int[])linIDsProperty.Value).Length; ++i)
((int[])linIDsProperty.Value)[i] = -1;
(please ignore the \ around the [i], the forum changes [i] into for some reason)
Thanks
Charlie.
View 4 Replies
View Related
May 28, 2008
I have set a validation error when changing a property in the advanced editor. Unfortunately this validation error is only displayed when you change tabs or press the ok button in the editor.
I have tried calling the validate method within the setcomponentproperty method but the error only show up when ok button is pressed or tab in editor.
I don't want to throw an exception, is there any way you can show a validation error immediately once the user has clicked away / entered / clicked to another property field after entering a property value in the advanced editor that is incorrect.
Thanks
View 1 Replies
View Related
Oct 15, 2006
Im working through the MS example of "removeDuplicates". I cant seem to figure out how to add custom property for input column.
I added the helper method:
private static void AddIsKeyCustomPropertyToInput(IDTSInput90 input, object value)
{
IDTSCustomProperty90 isKey = input.CustomPropertyCollection.New();
isKey.Name = "IsKey";
isKey.Value = value;
}
I call it from:
public override void ProvideComponentProperties()
{
//...
AddIsKeyCustomPropertyToInput(input, false);
//...
}
public override void ReinitializeMetaData()
{
IDTSInput90 input = ComponentMetaData.InputCollection[0];
if (input.CustomPropertyCollection.Count == 0)
{
AddIsKeyCustomPropertyToInput(input, false);
}
// ...
}
However when I deployed it and added the component to SSIS package - I cant see the Custom Column "IsKey" in the input column properties window.
What am I missing - please help
View 3 Replies
View Related
May 21, 2008
What is equivalent to dynamic property task of dts2000 in SSIS 2005;
Thanks
View 1 Replies
View Related
Mar 24, 2007
Can the WaitForMe Task property be used for building eventing based tasks (that is, "tasks with no defined execution lifecycle"), as Haselden's IS book terms it?
The SSIS run-time would appear to never interrogate this property.
I tried setting a breakpoint in a custom task on the WaitForMe
property. The breakpoint was never hit at run-time. Design-time only. It seems that the run-time ignores this property.
The documentation states that "On completion of any task, the runtime examines tasks that are still running in
the container, and if any of these tasks have WaitForMe set to
false, those tasks will be canceled." Well, the tasks with WaitForMe set to false are in fact not cancelled (e.g. System::CancelEvent is not signalled).
The intention of the WaitForMe Task property is to allow for event based tasks to not prevent a package (or other container) from finishing if the event never happens.
Tasks like the WMI Event Watcher, Message QueueTask set to receive, and third party tasks like file watchers, or service broker queue receivers would seem to fall in this category.
View 8 Replies
View Related
Jan 9, 2007
Hi,
In a custom task I have a property of type Hashtable. This property gets changed by a custom UI. After changing the value and closing the UI, the Hashtable is properly filled during investigation in the validate() method.
Now saving the package and inspecting the XML file of the package, there is only this entry:
<DTS:ObjectData><InnerObject><PromotionCodes Type="12" Value=""/></InnerObject></DTS:ObjectData>
So it seems, that the value is empty and there is no further data to the object. Trying to reopen the saved package, the opening fails with something like (Had to translate it my own from german):
Error loading '<PackageName>' : Error loading a task. The contact information for the task is ''. This problem occurs on an error during task loading.
There should be a out of the box possibility to save collections or do you have to implement Load/Save XML your own if you have complex datatypes as properties? As the package has the element of the property included (but empty), it seems it tries to save it.
Anyone a hint. Anybody occuring the same behavior?
Thanks T.
View 2 Replies
View Related
Oct 26, 2006
SSIS data flow transformation - Lookup task - best practice concerning Cachetype
I would like to know if there's any best practice concerning the CacheType property for the the Lookup task. Default value is "Full", but if the SSIS package is working with at lot of data, i.e. +10 mill. records from the OLE DB source to be handled through a variated numbers of data flow transformation tasks, it must have an impact memory usage if the lookup table also is a large table, i.e. +8 mill. records? When should I consider turning the property value to "none"
View 1 Replies
View Related
Apr 4, 2008
I've created a Union All data flow task which unions string fields from a couple of queries. I found that I needed to increase the length of the string field in the queries. Increasing the length causes an error in my Union All task. I can't seem to find a way to change the property of the fields in the Union All task. Most of the other data flow tasks have an advanced editor where I can change the length or type of the fields on the input and or output. I can't seem to find this for the Union All task.
Is there any way short of deleting the Output column and recreating it? (I like the order of my original output columns)
Thanks,
Bill Webster
View 6 Replies
View Related
Mar 18, 2008
hello guys,
I am having trouble with using disable property in the expression for data flow task. Here is the issue as explained below-
lets say i have 3 tables TableA, TableB, TableC from which i need to export data. So i create a table (TableList) where I save these table names and a unique id to these tables. e.g.
TableList will have-
TableName TableID
TableA 1
TableB 2
TableC 3
in the ssis package select these tableNames & Ids from tableList in Execute SQL Task. And assign the result set to a variable object (@TableList.
Then i use For Each Loop Container (For Each ADO Enumerator) , to loop through these tablesnames & iDs
Inside this loop container, i define three data flow tasks one for each table. So i have DataFlowTaskA (For TableA), DataFlowTaskB(For TableB), DataFlowTaskC (For TableC).
Now for a given table selected in the iteration, only the corresponding DataFlow Task should be exeuted. e.g. For the 1st iteration, if TableA is selected then only DataFlowTaskA should be executed and DataFlowTaskB& C should be skipped.
In order to achieve this, I am using a 3 variable @FlagA, @FlagB, @FlagC (type Boolean) one for each Table. and use the value of these flags for the "Disable" property of the data flow task (so @FlagA will be used for Disable property in the Expression for Data FlowTaskA, and so on..)
SotThe First Step inside the Loop, I use Script Task. (Input for the script task: read variable is @TableID and Read/Write varaibles are these 3 flags)
In this script task, I initialize these flags to true or false appropriately. So this is what i do
If (Dts.Variables("TableID").Value.ToString = "1") Then
Dts.Variables("@FlagA").Value = False
Else
Dts.Variables("@FlagA").Value = True
End If
If (Dts.Variables("TableID").Value.ToString = "2") Then
Dts.Variables("@FlagB").Value = False
Else
Dts.Variables("@FlagB").Value = True
End If
So in the 1st iteration, (if TableA comes) @FlagA=False and B&C will be True.
So the Disable property for DataFlowTask will be set false and for others it will be set to True. Thus, only DataFlowTaskA will be executed.
And this action should be repeated for each input table. this is the logic.
However only for the 1st iteration(say TableA is selected) it behaves as above. i.e. DataFlowTaskA is executed and DataFlowTaskB & C are skipped. But in the 2nd iteration(say TableB is selected) , it again executes DataFlowTaskA and doesnt exeute B & C (where it should have executed B & skipped A&C).
I do set daelay validation to true for all these but it still it doesnt working as expected. Even I checked the values for all the flags for each iteration and they seem to get the correct values. But somehow Diable propery in the expression not behaving as it should.
Am i missing anything. Do i need to set any other property to make this work.
I apprecite any help.
Thanks
View 3 Replies
View Related
Apr 3, 2006
Hi guys,
The default Engine Thread property of a data flow task is set to 5, is this the best setting? what if I would like to run complex data flow tasks on multi-processor machines, should I increase the engine thread? If so, then what is the recommended Engine Thread number for running complex data flow tasks in a multi processor system?
Even if i am running simple data flow tasks on a multi processor machine, should I change the engine thread?
Thanks!
Kervy
View 3 Replies
View Related
Mar 17, 2008
Hi All,
I have the following issue, i want to make dynamic the Argument property of the Execute Process Task but i couldn't able to do so, i have posted several times , hopefully i will get a solution today. I am using the following Argument to execute (winzip) program.
Argument: /e C:FTPFile1.zip C:FTPUnzipped
This Argument works but since File1.zip gets change every time, i mean it will be File2.zip, thus i have to change it manually on the Execute Process Task every time, however i want it to change by itself.
To make it clear, the /e mean winzip usage for extract file, the C:FTPFile1.zip is where the zipped file is, and the C:FTPUnzipped is where i dumped the unzipped files. as you see the file name will change every time like File1.zip, File2.zip, File3.zip, etc... Thus i want to make it daynamic, for example if i execute today File1.zip, then i have to execute tomorrow File2.zip automatically, and then File3.zip etc, that means the source file is changing every time, how do i make it then to be Dynamic.
Please help, i need your input badly.
Thank you in advance,
View 14 Replies
View Related
Feb 15, 2007
Hello,
I have a group I'll call G4.
The header table row for G4 contains 3 textboxes containing the sums of the contents within G4. The header table row for G4 is visible while it's contents, including the G4 footer table row, is kept invisible until the report user drills down into the group.
When the report user drills down into G4 the footer table row becomes visible and the sums of the contents of the group are displayed for a second time.
At this point I want the sums in the header to be set to invisible when the sums in the footer are made visible by the drilldown.
When I try to reference the hidden property of textbox66 in the G4 footer in order to set the hidden property of header textbox57 in the G4 header I get to this point...
=IIF(reportitems!textbox66.
When it fails to give me an option of choosing the .Hidden property and instead only gives me a .Value.
If I complete the IIF statement manually so that it spells out .....
=IIF(ReportItems!Textbox66.Hidden = False, True, False)
...the report chokes on it.
So my question is, how do I reference the hidden property of one or more textboxes in a group to use as condition checks to set the hidden property of another textbox in that same group?
Thank you for any help you can provide. We are only now beginning to implement reporting services and I have not yet had the chance to research this in greater detail for lack of time.
View 1 Replies
View Related
Sep 19, 2007
Hi,
I am facing a very strange issue with the Send Mail Task:
I am fetching the recipient from a Recordset and storing it in a variable (MailList).
Now, I modify the Send Mail Task to include an Expression which updates the "ToLine" property with the email address in the "MailList" variable.
Moreover, I am not hard-coding the "To" property in the "Mail" tab of "Send Mail Task Editor" and leaving it blank. Now, it does not allow me to execute the package and gives me a "Package Validation Error" saying: No recipient is specified.
Any solutions?
Thanks in advance.
Regards,
B@ns
View 5 Replies
View Related
Apr 5, 2007
This task or container has failed, but because FailPackageOnFailure property is FALSE, the package will continue. This warning is posted when the SaveCheckpoints property of the package is set to TRUE and the task or container fails.
I have just spotted the message above in one of my log files.
I've never noticed it before. Is it new in SP1? I'm guessing it must be.
If so - good job. This is a very important addition because the behaviour of checkpoints without setting FailPackageOnFailure=TRUE is not intuitive (in my opinion).
-Jamie
View 3 Replies
View Related
Jan 22, 2008
Hello,
I am having a hard time setting the executable path for an Execute Process Task in SSIS. I have a variable that is initialized at package statup which holds the path to an executable in Windows. When I set the property "Executable" Path in an expression, I get a warning that the path for the executable is not set. One workaround was to try and initialize the variable with a bogus path with the hopes that the "correct" value will be written on run-time. NO LUCK. I still get the error and I cannot run the package until I put a static path.
Does anyone have a clue as to what is going on??
Mike
View 1 Replies
View Related
May 23, 2015
I'm writing my first SSIS custom task. I have added Public properties, which appear in the standard task properties window, and to one of them I have added an EditorAttribute as follows:
<Category("General"), _
Browsable(True), _
EditorAttribute(GetType(UIFileNameEditor), _
GetType(System.Drawing.Design.UITypeEditor))> _
Public Property FilesToArchive() As String
[Code] ....
When I select the FilesToArchive property in the Properties window, I get an ellipsis that appears in the property value. When I click on the ellipsis, it brings up the FolderBrowserDialog, which is defined in the UIFileNameEditor class. This all works fine.
What I want to do is to bring up the EditorUI, the one you get when you double click on the task, and also populate that with properties which can be edited. I have a class which inherits DTSBaseTaskUI, which is displayed when I double click on the task.
I can also get properties to be displayed in that UI but I cannot get them to be editable in that UI, using the same technique as in the standard Properties window, as described above.
View 3 Replies
View Related
Apr 19, 2006
I wanted to create a package to copy the objects from one database to another and replace those object if they already exist. Therefore, before the package executes you do not know whether all the objects exist on the target server or only some of them.
Using the 'Transfer SQL Server Objects Task' I have found that I cannot get this to execute cleanly by itself. If I set the 'DropObjectsFirst' to false then an error is thrown if the object exists and if I set it to true then an error is thrown if it does not exist.
In order to get round this I have had to create an 'Execute SQL Task' to list all the objects and then go through them dropping them on the target server in a for each loop before executing the 'Transfer SQL Server Objects Task' with 'Transfer SQL Server Objects Task' set to false.
However, is there a better way of achieving this or am I missing something in the 'Transfer SQL Server Objects Task'?
View 11 Replies
View Related
