I have a problem with SQL rounding my decimals up when I pull them from a temp table that has the column set as VARCHAR. What is happening is I am pulling the info from a flat file but each column has "" around each field so I must make the temp table columns all VARCHAR so I may pull the info from the file properly. So after the info has been extracted, I run an update statement on the temp table to remove all quotes. Once this is done, the revised info is inserted into a staging table and any field that is a represented as a decimal is labled as such in the staging table.
What I am running into is when the info is inserted into the staging table, the decimals are rounded up to whole values. The column has been checked to verify that it is indeed a decimal. I even have a CAST statement in the insert hoping to combat the rounding issue, but it is not helping.
So what reason(s) would my decimals be rounding up?
I have a field in my SQL Server 2005 database of type numeric(18,3)In code, I treat the value as decimalWhen creating my command parameters, this is how I'm declaring them:prm.SqlDbType = SqlDbType.Decimal;prm.Precision = (byte)int.Parse("18");prm.Size = int.Parse("0");prm.Scale = (byte)int.Parse("3");Inserting a number like 5.687 is rounding to 6.000 anyone know why it is doing that?
Hi, I have a decimal field in SQL Server 2000 which has a precision value of 3 and scale 1. I will be storing values ranging from 0.5 to 10.0 in there. However, in my asp.net web form, if I select the value 2.5 from the DropDownList, SQL Server stores it as 3. Can anyone tell me why this is happening and give me some pointers on what I can do to fix it? Your help is much appreciated.
Hello I'm trying to write a SQL Statement along the lines of....
SELECT stringField + ' : ' + STR(decimalField) AS myField FROM tablename WHERE myCondition = myValue
Where stringField is a String field and decimalField is a Decimal Field in my Table. In this statement it converts the decimal field to a string value so that it doesn't throw a conversion error but unfortunatly it seems to round up the value to an integer value and cuts off all my decimal places.
DECLARE @MyPay decimal(5,9); SET @MyPay = 258.235543210; SELECT CAST(@MyPay AS decimal(5,2))
This is what the resultset is currently with the code above:
258.24
I would like to Not have the value round up. I would like to always show only the first two digits to the right of the decimal and not perform any rounding.
My code is rounding my values incorrectly and I'm not sure why. In this example, the numerator is 48 and the denominator is 49 which is .9795 but my SQL is producing 97.0. I would like to result to be 97.9
CONVERT(decimal(4,1), (SUM(CASE Score_CorrectID WHEN 1 THEN 1 ELSE 0 END + CASE Score_MiniMiranda WHEN 1 THEN 1 ELSE 0 END + CASE Score_RepAssistance WHEN 1 THEN 1 ELSE 0 END+ CASE Score_Tone WHEN 1 THEN 1 ELSE 0 END + CASE Score_Consol_Default WHEN 'OK' THEN 1 ELSE 0 END) * 100) / SUM(CASE WHEN Score_CorrectID IS NULL THEN 0 ELSE 1 END + CASE WHEN Score_MiniMiranda IS NULL THEN 0 ELSE 1 END + CASE WHEN Score_RepAssistance IS NULL THEN 0 ELSE 1 END+ CASE WHEN Score_Tone IS NULL THEN 0 ELSE 1 END + CASE WHEN Score_Consol_Default IS NULL THEN 0 ELSE 1 END)) AS Avg_Percent_Actions
I'm trying to update a decimal field with a single decimal number (1.8) the problem i'm having, is that it's rounding the number up (2). I would've thought that a decimal datatype would keep the decimal places correct?
This is quite annoying.. I've been searching around the web for an answer.. To no avail (I'm probably asking the wrong question)
Can someone please point me in the right direction?
if I 'print' a MONEY value, or cast a MONEY variable to VARCHAR, it automatically rounds it to two decimal places. Maybe that's a built-in convenience, but I'd like to make it not do that.My workaround right now is to first cast my MONEY variabled to DECIMAL(30,4), and then cast the result to VARCHAR, but I'd like to avoid that step if possible.Consider the following
query:DECLARE @UnitCost MONEY  SET @UnitCost = .0167  SELECT      @UnitCost,      CAST(@UnitCost AS VARCHAR(30)),     CAST(CAST(@UnitCost AS DECIMAL(30, 4)) AS VARCHAR(30))  - - Results in: 0.0167, 0.02, 0.0167Â
I have a field in my database that is stored as varchar. The values are usually contain a decimal, and should have really been a float or decimal. In order for me to do analytics in my BI environment, I need to convert this to a float or decimal.
eg of values.
10.00 20.00 0.00 15.00
or could be missing when I use cast(value as float) or cast(value as decimal(9,2)) or convert(float, value) I get an error
I have a table Saleshistory with 89481412 records. I have a field Sales of nvarchar type, all the records in this field are numeric, and the records are with 2 decimal places. I expect all the records to be ending at .00 (for example 5.00,345.00,25.00), but I want to verify if something is for example 5.6 etc.
So in short I want to check if any Salesrecords have more than zero values in the decimal. How can I check this.
So my data is delivered as numeric(9,2)...like 100.00. I have to extract that data and store it as a varchar 0 filled without the decimal place...like 0000010000///I tried the following and it did not work...
I am trying to setup an indicator value for an SSRS report to show green and red values on a report, based on the NRESULT value. The problem I am facing is that I have several different CASE statements that have the same logic, and they are processing just fine. NRESULT is a decimal field, so no conversion should be necessary. I do not know why I am getting the "Arithmetic overflow error converting varchar to data type numeric." error message.
Below is the CASE statement where the error is occurring. It is in the part of the ELSE CASE. The first CASE works just fine when the ELSE CASE is commented out. If I also change the ELSE CASE statement to say "else case when LEFT(NRESULT,1) = '-' then '0'", then it processes fine, too, so it has to be something I am missing something in the check on negative values. I do need the two checks, one for positive and one for negative values, to take place.
case when LEFT(NRESULT,1) <> '-' then --This portion, for checking positive values, of the CASE statement works fine. CASE WHEN LEFT(ROUND(NRESULT,2),4) between 0.00 and 0.49 THEN '2' --Green ELSE CASE WHEN LEFT(ROUND(NRESULT,2),4) > 0.49 THEN '0' --Red ELSE '3' --White END END else case when LEFT(NRESULT,1) = '-' then --This portion, for checking negative values, of the CASE statement is producing the conversion error message.
[code]....
I checked the NRESULT field, and there are not any NULL values in there, either.
I am working with a legacy SQL server database from SQL Server 2000. I noticed that in some places that they use decimal data types, that I would normally think they should be using integer data types. Why is this does anyone know?
Example: AutomobileTypeId (PK, decimal(10,0), not null)
I am creating a table on SQL Server. One of the columns in this new table contains whole integer as wells as decimal values (i.e. 4500 0.9876). I currently have this column defined as Decimal(12,4). This adds 4 digits after the decimal point to the whole integers. Is there a data type that will have the decimal point only for decimal values and no decimal point for the whole integers?
I would like to cast (convert) data type decimal(24,4) to decimal(21,4). I could not do this using standard casting function CAST(@variable as decimal(21,4)) or CONVERT(decimal(21,4),@variable) because of the following error: "Arithmetic overflow error converting numeric to data type numeric." Is that because of possible loss of the value?
I wanted to convert a dataset from vb.net (2.0) to an .XLS file, by MS Jet. My national standard is using decimal commas, not decimal points for numbers signing the beginning of decimal places. But the MS Jet Engine uses decimal point,in default. Therefore, in the Excel file only string formatted cells can welcome this data, not number formatted. How can I solve or get around this problem? (with jet if it possible) iviczl
I'd like to convert a Decimal value into a string so that the entireoriginal value and length remains intact but there is no decimal point.For example, the decimal value 6.250 is selected as 06250.Can this be done?
I am designing some reports for a German branch of my company and need to replace decimal point with a comma and the thousand comma seperator with a decimal point.
e.g. ‚¬1,500,123.00 to ‚¬1.500.123,00
Is there a property that I can change in the report designer to allow this to happen or is this something I need to convert in a Stored Proc.
I am having a file in which amount fields are given in a Packed Decimal format. Can anyone suggest me how I can read this data element from the file and convert it into SQL decimal datatype.
File is a fixed length. All the amount fields are given in Packed Decimal Format and rest of the fields are given in text format. How can i identify and convert only those packed decimals using SQL/.Net.
Example : a row in a file that has some packed decimals 158203508540188236252EUR20BZK0030 Å“& 20060715 0001010100010101
I have looked far and wide and have not found anything that works to allow me to resolve this issue.
I am moving data from DB2 using the MS OLEDB Provider for DB2. The OLEDB source sees the column of data as DT_TEXT. I setup a destination to SQL Server 2005 and everything looks good until I try and run the package.
I get the error: [OLE DB Source [277]] Error: An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft DB2 OLE DB Provider" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
[OLE DB Source [277]] Error: Failed to retrieve long data for column "LIST_DATA_RCVD".
[OLE DB Source [277]] Error: There was an error with output column "LIST_DATA_RCVD" (324) on output "OLE DB Source Output" (287). The column status returned was: "DBSTATUS_UNAVAILABLE".
[OLE DB Source [277]] Error: The "output column "LIST_DATA_RCVD" (324)" failed because error code 0xC0209071 occurred, and the error row disposition on "output column "LIST_DATA_RCVD" (324)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The PrimeOutput method on component "OLE DB Source" (277) returned error code 0xC0209029. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Any suggestions on how I can get the large string data in the varchar column in DB2 into the varchar(max) column in SQL Server 2005?
I am trying to create a store procedure inside of SQL Management Studio console and I kept getting errors. Here's my store procedure.
Code Block CREATE PROCEDURE [dbo].[sqlOutlookSearch] -- Add the parameters for the stored procedure here @OLIssueID int = NULL, @searchString varchar(1000) = NULL AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON; -- Insert statements for procedure here IF @OLIssueID <> 11111 SELECT * FROM [OLissue], [Outlook] WHERE [OLissue].[issueID] = @OLIssueID AND [OLissue].[issueID] = [Outlook].[issueID] AND [Outlook].[contents] LIKE + ''%'' + @searchString + ''%'' ELSE SELECT * FROM [Outlook] WHERE [Outlook].[contents] LIKE + ''%'' + @searchString + ''%'' END
And the error I kept getting is:
Msg 402, Level 16, State 1, Procedure sqlOutlookSearch, Line 18
The data types varchar and varchar are incompatible in the modulo operator.
Msg 402, Level 16, State 1, Procedure sqlOutlookSearch, Line 21
The data types varchar and varchar are incompatible in the modulo operator.
For the life of me I cannot figure out why SSIS will not convert varchar data. instead of using the table to table method, I wrote a SQL query so that I could transform the datatype ntext to varchar 512 understanding that natively MS is going towards all Unicode applications.
The source fields from Access are int, int, int and varchar(512). The same is true of the destination within SQL Server 2005. the field 'Answer' is the varchar field in question....
I get the following error
Validating (Error)
Messages
Error 0xc02020f6: Data Flow Task: Column "Answer" cannot convert between unicode and non-unicode string data types. (SQL Server Import and Export Wizard)
Error 0xc004706b: Data Flow Task: "component "Destination - Query" (28)" failed validation and returned validation status "VS_ISBROKEN". (SQL Server Import and Export Wizard)
Error 0xc004700c: Data Flow Task: One or more component failed validation. (SQL Server Import and Export Wizard)
Error 0xc0024107: Data Flow Task: There were errors during task validation. (SQL Server Import and Export Wizard)
DTS used to be a very strong tool but a simple import such as this is causing me extreme grief and wondering of SQL2005 is ready for primetime. FYI SP1 is installed. I am running this from a workstation and not on the server if that makes a difference...
