Hello:
I have a situation where our users will key into a parameter field the name for the heading. I callled the parameter heading VarHdg1. How do I go about doing this? I tried printing @VarHdg1 but nothing came out. Please advise.
Thanks
Hi All,
I have never used PIVOT before but looks exactly what I want for this scenario:
I have rows of dates associated with ID of Hotels and Room avalability for each Hotel/Date..... I want to show the sum of the rooms per date as columns I am using something like this:SELECT dbHotelID ,[09/20/2007]as [Today],[09/21/2007]as [Today+1],[09/22/2007]as [Today+2] FROM vwRoomAvailable PIVOT (SUM(dbRoomNumber) FOR AvailableDate IN ([09/20/2007], [09/21/2007], [09/22/2007])) AS pAs you can see I know how may days I want in advance so know how many columsn so its not dynamic.. I just dont know what the dates are:I would like to do something like:
DECLARE @todayDate varchar(255),
DECLARE @todayPlusOne varchar(255),
DECLARE @todayPlusTwo varchar(255) SET @todayDate = CONVERT(CHAR, GETDATE(),101)SET @todayPlusOne = CONVERT(CHAR, DATEADD(d, 1, GETDATE(),101)SET @todayPlusTwo = CONVERT(CHAR, DATEADD(d, 2, GETDATE(),101) SELECT dbHotelID,@todayDate as Today,@todayPlusOne as [Today+1],@todayPlusTwo as [Today+2] FROM vwRoomAvailable PIVOT (SUM(dbHotelRoomAvailabilityNumber) FOR AvailableDate IN ([@todayDate], [@todayPlusOne], [@todayPlusTwo])) AS pBut I can’t seem to put the variable in the PIVOT value list or GETDATE() Anyone got any ideas or do I just try and do this another way and forgot PIVOT. I am using sql server 2005 express.
Thanks in advance.
Lee
we have a table called evaluation_questions, the table has following fields
queId,Question, level, parentId
the queId is primary key(auto number),where as the field "question" will have question, heading or the subheading,
the level describes the hierarchy of the field "Question", 0 means its a heading, 1 means a subheading and 2 means a question.
where as the parentId means describes the immediate parentId, like if it is 1, then the parent will be English heading....
queIdQuestionlevelparentId
1English00
2Reading11
3Writing11
4recognizing words12
5Fluency22
so English is a heading as level is 0 and has no parent as parentId is also 0.
Reading is a subheading as level is 1 and has a prent English as its parentId=1 which is the queId oof English
same is the case with writing
where as recognizing words and fluency both are questions as the level is 2 and their parentId is 2 which means they come under reading.
Output:
Now What i want is to retrieve the all the questions and headings under a specified heading.like if i pass parentID as a parameter to stored
procedure i should get all the headings and questions under a specified parentID.i need to fill the dataset with it.
I have a table like this
EMPnoSERISSTATUS jOB POINTS
1AAPOC12
1BAQCS5
2CPREP4
2AASOS1
5AATDS4
1APVSS320
and i need a query or Stored prodedure to get data in the below format
EMPNOABC
133250
2104
5400
Note: A, B,C ... are field name in table (SERIS) and i would like that data as the column heading.
I dont want to use below query , as we dont know the value is dyanamic
SELECT empno,
SUM(CASE seris WHEN <B>'A'</B> THEN POINTS END ) AS <B> 'A' </B>
SUM(CASE seris WHEN <B> 'B' </B> THEN POINTS END ) AS <B>'B'</B>
FROM TABLE1
GROUP BY EMPNO
I am trying to change the row and column heading to make it more meaningful in MDX.
For example instead of showing the_actual_cost, i want to show cost. This is done easily in SQL like
SELECT the_actual_cost AS cost......
Any help will be greatly appreciated.
Thanks
Mahesh
Hi
I have a query which produces effectively a pivottable. Is there any way I can dynamically assign the column headings ie the code on each line after AS rather than hard coded as I have currently
Extract of Current SP
CREATE PROC dbo.FairValeSummaryPivot
@BatchRunID INT
AS
SET NOCOUNT ON
SELECT
MIN(CASE WHEN Tn = '1' THEN PVBalance ELSE 0 END) AS 'Tn1 - Tn0' ,
MIN(CASE WHEN Tn = '0' THEN PVBalance END) AS 'Tn0 - Tn-1' ,
MIN(CASE WHEN Tn = '-1' THEN PVBalance END) AS 'Tn-1 - Tn-2',
MIN(CASE WHEN Tn = '-2' THEN PVBalance END) AS 'Tn-2 - Tn-3',
MIN(CASE WHEN Tn = '-3' THEN PVBalance END) AS 'Tn-3 - Tn-4',
MIN(CASE WHEN Tn = '-4' THEN PVBalance END) AS 'Tn-4 - Tn-5',
-- and so on
FROM FVSummary
WHERE BatchRunID = @BatchRunID
GO
what I would like would be along the lines of
MIN(CASE WHEN Tn = '1' THEN PVBalance ELSE 0 END) AS 'Tn' + Tn + ' - Tn' + Tn-1, ,
Hope this is clear
Cheers
I'm trying to create a heading for my report.
I want
sales figures between 09/11/2006 to 09/04/2007.
The date comes from parameters
What I have done is created 4 text boxes
textbox 1 = sales figures between
textbox 2 = =datepart("D", Parameters!param_datef.Value) & "/" & datepart("M", Parameters!param_datef.Value) & "/" & datepart("YYYY", Parameters!param_datef.Value)
textbox 3 = To
textbox 4 = =datepart("D", Parameters!param_datet.Value) & "/" & datepart("M", Parameters!param_datet.Value) & "/" & datepart("YYYY", Parameters!param_datet.Value)
Ok the problem is the text boxes when previewed are all over the place.
In crystal reports you can add a formula into a text box after text
Is this sort of thing possible in Reporting services
Thanks for all your help
Hello,
I have a simple question, can someone provide syntax to wrap a column heading?
Example: Select sum(netprice) as 'Current YTD Invoice Amount'
I would like to see the output's column heading as:
Current YTD
Invoice Amount
----------------------
####.##
Thank you in advance,
Maria
Hello :
In the heading of the report, I want to put one text area, or i put a datum of the base.
He says to me :
Fields cannot be used in headings o feet of page.
Have you ideas??
Thank you very much
I would like to make the column heading to be the current year for the Sales I'm adding below.
SELECT dbo.QIVSalesMTDYTDCustSalesPerson.slspsn_no,dbo.arslmfil_SQL.slspsn_name,
SUM(CASE WHEN year(getdate()) = qivsalesmtdytdcustsalesperson.year THEN Sales END) AS convert(varchar(4),year(getdate()))
FROM dbo.QIVSalesMTDYTDCustSalesPerson INNER JOIN
dbo.arslmfil_SQL ON dbo.QIVSalesMTDYTDCustSalesPerson.slspsn_no = dbo.arslmfil_SQL.humres_id
GROUP BY dbo.QIVSalesMTDYTDCustSalesPerson.slspsn_no, dbo.arslmfil_SQL.slspsn_name
What I have now gives me incorrect syntax near keyword convert.
In SSRS/RDL, How do you format a column heading to use carriage returns?
I have a couple of instance where I have a column heading that I want spread over 3 lines. For example, the column heading "= Actual Amount" I would want centered and displayed on 3 lines, as follows:
=
Actual
Amount
We run 2014 enterprise. I tried this with both table and matrix controls to no avail.
In the table scenario, I drag the table control over, instruct ssrs that a group name will go into column 1 and a sales figure in column2. Then I highlight the sales figure cell, add a column group on month number and generate my report off some june and july data.
ssrs understands that the months now expand horizontally but the rows alternate one with june filled in (blanks in july) and the next with july filled in for the same group name. I believe I got all my sort by conditions set but am not sure.Â
I tried all sorts of combos in the tablix and group properties before giving up.
I need to print in RED if there's atleast 1 or more consistency error and need a heading color of the table (Caption) how to do it.
DECLARE @tableHTML NVARCHAR(MAX) ;
SET @tableHTML =
N'<H1>DB Corruption Report:</H1>' +
N'<table border="1">' +
N'<tr><th>DBName</th><th>MessageText</th>' +
[code]....
I am using Column Groups:
And I am getting:
Note how Today is being repeated three times. What I want is Today appearing once and centered (merged cell). Is this possible?
i just clicked on Advanced mode in Column Group, and then in Row Group Side i set Fixed Data=true for first top static. I'm using local report not server report and i'm displaying that local report in Reportviewer. Now also its not working....
View 6 Replies View Related
Hi there,
I am a new member of this site and I am not very much aware of T-sql's working.
My question is what if I need to get one column's data to be the heading of another column.
To be very exact I have a school's database. The table I am talking about is of the results of students. The table contains Student ID, Subject ID, Total marks of the subject, Marks obtained in the subject. Now I want to print a report by generating data from this table. Right now the data is something like this
StuID - - - SubID - - - -Tot - - -Obt
1 - - - - - - -1 - - - - - - -50 - - - 38
1 - - - - - - -2 - - - - - - -50 - - - 41
1 - - - - - - -3 - - - - - - -50 - - - 42
1 - - - - - - -4 - - - - - - -50 - - - 40
2 - - - - - - -1 - - - - - - -50 - - - 35
2 - - - - - - -2 - - - - - - -50 - - - 40
2 - - - - - - -3 - - - - - - -50 - - - 42
2 - - - - - - -4 - - - - - - -50 - - - 41
StudentID and SubjectID fields are related to other tables so I can get the names from there but when I need the report I need the data in the form of
StuID - Sub 1 - - - Sub 2 - - - Sub 3 - - - -Sub4
1 - - - - 38 - - - - - - 41 - - - - - - 42 - - - - - - 40
2 - - - - 35 - - - - - - 40 - - - - - - 42 - - - - - - 41
The Subjects can be different for different students so the query should be dynamic instead of hard coding the names of the subjects. I hope I am clear with my question. The subjectIDs or their names will become the headings and they will contain the obtained marks for that subjects in their columns just for the reports. I have also checked the PIVOT function but was not able to do what I wanted.
Thanks.
I'm working on an SSIS package that uses a vb.net script to grab some XML from a webservice (I'd explain why I'm not using a web service task here, but I'd just get angry), and I wish to then assign the XML string to a package variable which then gets sent along to a DataFlow Task that contains an XML Source that points at said variable. when I copy the XML string into the variable value in the script, if do a quickwatch on the variable (as in Dts.Variable("MyXML").value) it looks as though the new value has been copied to the variable, but when I step out of that task and look at the package explorer the variable is its original value.
I think the problem is that the dataflow XML source has a lock on the variable and so the script task isn't affecting it. Does anyone have any experience with this kind of problem, or know a workaround?
I have a SQL Task that updates running totals on a record inserted using a Data Flow Task. The package runs without error, but the actual row does not calculate the running totals. I suspect that the inserted record is not committed until the package completes and the SQL Task is seeing the previous record as the current. Here is the code in the SQL Task:
DECLARE @DV INT;
SET @DV = (SELECT MAX(DateValue) FROM tblTG);
DECLARE @PV INT;
SET @PV = @DV - 1;
I've not been successful in passing a SSIS global variable to a declared parameter, but is it possible to do this:
DECLARE @DV INT;
SET @DV = ?;
DECLARE @PV INT;
SET @PV = @DV - 1;
I have almost 50 references to these parameters in the query so a substitution would be helpful.
Dan
I'm new to SSIS, but have been programming in SQL and ASP.Net for several years. In Visual Studio 2005 Team Edition I've created an SSIS that imports data from a flat file into the database. The original process worked, but did not check the creation date of the import file. I've been asked to add logic that will check that date and verify that it's more recent than a value stored in the database before the import process executes.
Here are the task steps.
[Execute SQL Task] - Run a stored procedure that checks to see if the import is running. If so, stop execution. Otherwise, proceed to the next step.
[Execute SQL Task] - Log an entry to a table indicating that the import has started.
[Script Task] - Get the create date for the current flat file via the reference provided in the file connection manager. Assign that date to a global value (FileCreateDate) and pass it to the next step. This works.
[Execute SQL Task] - Compare this file date with the last file create date in the database. This is where the process breaks. This step depends on 2 variables defined at a global level. The first is FileCreateDate, which gets set in step 3. The second is a global variable named IsNewFile. That variable needs to be set in this step based on what the stored procedure this step calls finds out on the database. Precedence constraints direct behavior to the next proper node according to the TRUE/FALSE setting of IsNewFile.
If IsNewFile is FALSE, direct the process to a step that enters a log entry to a table and conclude execution of the SSIS.
If IsNewFile is TRUE, proceed with the import. There are 5 other subsequent steps that follow this decision, but since those work they are not relevant to this post.
Here is the stored procedure that Step 4 is calling. You can see that I experimented with using and not using the OUTPUT option. I really don't care if it returns the value as an OUTPUT or as a field in a recordset. All I care about is getting that value back from the stored procedure so this node in the decision tree can point the flow in the correct direction.
CREATE PROCEDURE [dbo].[p_CheckImportFileCreateDate]
/*
The SSIS package passes the FileCreateDate parameter to this procedure, which then compares that parameter with the date saved in tbl_ImportFileCreateDate.
If the date is newer (or if there is no date), it updates the field in that table and returns a TRUE IsNewFile bit value in a recordset.
Otherwise it returns a FALSE value in the IsNewFile column.
Example:
exec p_CheckImportFileCreateDate 'GL Account Import', '2/27/2008 9:24 AM', 0
*/
@ProcessName varchar(50)
, @FileCreateDate datetime
, @IsNewFile bit OUTPUT
AS
SET NOCOUNT ON
--DECLARE @IsNewFile bit
DECLARE @CreateDateInTable datetime
SELECT @CreateDateInTable = FileCreateDate FROM tbl_ImportFileCreateDate WHERE ProcessName = @ProcessName
IF EXISTS (SELECT ProcessName FROM tbl_ImportFileCreateDate WHERE ProcessName = @ProcessName)
BEGIN
-- The process exists in tbl_ImportFileCreateDate. Compare the create dates.
IF (@FileCreateDate > @CreateDateInTable)
BEGIN
-- This is a newer file date. Update the table and set @IsNewFile to TRUE.
UPDATE tbl_ImportFileCreateDate
SET FileCreateDate = @FileCreateDate
WHERE ProcessName = @ProcessName
SET @IsNewFile = 1
END
ELSE
BEGIN
-- The file date is the same or older.
SET @IsNewFile = 0
END
END
ELSE
BEGIN
-- This is a new process for tbl_ImportFileCreateDate. Add a record to that table and set @IsNewFile to TRUE.
INSERT INTO tbl_ImportFileCreateDate (ProcessName, FileCreateDate)
VALUES (@ProcessName, @FileCreateDate)
SET @IsNewFile = 1
END
SELECT @IsNewFile
The relevant Global Variables in the package are defined as follows:
Name : Scope : Date Type : Value
FileCreateDate : (Package Name) : DateType : 1/1/2000
IsNewFile : (Package Name) : Boolean : False
Setting the properties in the "Execute SQL Task Editor" has been the difficult part of this. Here are the settings.
General
Name = Compare Last File Create Date
Description = Compares the create date of the current file with a value in tbl_ImportFileCreateDate.
TimeOut = 0
CodePage = 1252
ResultSet = None
ConnectionType = OLE DB
Connection = MyServerDataBase
SQLSourceType = Direct input
IsQueryStoredProcedure = False
BypassPrepare = True
I tried several SQL statements, suspecting it's a syntax issue. All of these failed, but with different error messages. These are the 2 most recent attempts based on posts I was able to locate.
SQLStatement = exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
SQLStatement = exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
Parameter Mapping
Variable Name = User::FileCreateDate, Direction = Input, DataType = DATE, Parameter Name = 0, Parameter Size = -1
Variable Name = User::IsNewFile, Direction = Output, DataType = BYTE, Parameter Name = 1, Parameter Size = -1
Result Set is empty.
Expressions is empty.
When I run this in debug mode with this SQL statement ...
exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
... the following error message appears.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Import data from flat file to tbl_GLImport, DTS.Pipeline: Validation phase is beginning.
Error: 0xC002F210 at Compare Last File Create Date, Execute SQL Task: Executing the query "exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output" failed with the following error: "No value given for one or more required parameters.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Compare Last File Create Date
Warning: 0x80019002 at GLImport: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "MyPackage.dtsx" finished: Failure.
When the above is run tbl_ImportFileCreateDate does not get updated, so it's failing at some point when calling the procedure.
When I run this in debug mode with this SQL statement ...
exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
... the tbl_ImportFileCreateDate table gets updated. So I know that data piece is working, but then it fails with the following message.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Import data from flat file to tbl_GLImport, DTS.Pipeline: Validation phase is beginning.
Error: 0xC001F009 at GLImport: The type of the value being assigned to variable "User::IsNewFile" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
Error: 0xC002F210 at Compare Last File Create Date, Execute SQL Task: Executing the query "exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output" failed with the following error: "The type of the value being assigned to variable "User::IsNewFile" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Compare Last File Create Date
Warning: 0x80019002 at GLImport: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "MyPackage.dtsx" finished: Failure.
The IsNewFile global variable is scoped at the package level and has a Boolean data type, and the Output parameter in the stored procedure is defined as a Bit. So what gives?
The "Possible Failure Reasons" message is so generic that it's been useless to me. And I've been unable to find any examples online that explain how to do what I'm attempting. This would seem to be a very common task. My suspicion is that one or more of the settings in that Execute SQL Task node is bad. Or that there is some cryptic, undocumented reason that this is failing.
Thanks for your help.
I am in the middle of taking course 2073B €“ Programming a Microsoft SQL Server 2000 Database. I noticed that in Module9: Implementing User-Defined Functions exercise 2, page 25; step 2 is not returning the correct answer.
Select employeeid,name,title,mgremployeeid from dbo.fn_findreports(2)
It returns manager id for both 2 and 5 and I think it should just return the results only for manager id 2. The query results for step 1 is correct but not for step 2.
Somewhere in the code I think it should compare the inemployeeid with the previous inemployeeid, and then add a counter. If the two inemployeeid are not the same then reset the counter. Then maybe add an if statement or a case statement. Can you help with the logic? Thanks!
Here is the code of the function in the book:
/*
** fn_FindReports.sql
**
** This multi-statement table-valued user-defined
** function takes an EmplyeeID number as its parameter
** and provides information about all employees who
** report to that person.
*/
USE ClassNorthwind
GO
/*
** As a multi-statement table-valued user-defined
** function it starts with the function name,
** input parameter definition and defines the output
** table.
*/
CREATE FUNCTION fn_FindReports (@InEmployeeID char(5))
RETURNS @reports TABLE
(EmployeeID char(5) PRIMARY KEY,
Name nvarchar(40) NOT NULL,
Title nvarchar(30),
MgrEmployeeID int,
processed tinyint default 0)
-- Returns a result set that lists all the employees who
-- report to a given employee directly or indirectly
AS
BEGIN
DECLARE @RowsAdded int
-- Initialize @reports with direct reports of the given employee
INSERT @reports
SELECT EmployeeID, Name = FirstName + ' ' + LastName, Title, ReportsTo, 0
FROM EMPLOYEES
WHERE ReportsTo = @InEmployeeID
SET @RowsAdded = @@rowcount
-- While new employees were added in the previous iteration
WHILE @RowsAdded > 0
BEGIN
-- Mark all employee records whose direct reports are going to be
-- found in this iteration
UPDATE @reports
SET processed = 1
WHERE processed = 0
-- Insert employees who report to employees marked 1
INSERT @reports
SELECT e.EmployeeID, Name = FirstName + ' ' + LastName , e.Title, e.ReportsTo, 0
FROM employees e, @reports r
WHERE e.ReportsTo = r.EmployeeID
AND r.processed = 1
SET @RowsAdded = @@rowcount
-- Mark all employee records whose direct reports have been
-- found in this iteration
UPDATE @reports
SET processed = 2
WHERE processed = 1
END
RETURN -- Provides the value of @reports as the result
END
GO
Hi
View 7 Replies View RelatedI keep getting this debug error, see my code below, I have gone thru it time and time agian and do not see where the problem is. I have checked and have no NULL values that I'm trying to write back.
~~~~~~~~~~~
Error:
System.NullReferenceException was unhandled by user code Message="Object variable or With block variable not set." Source="Microsoft.VisualBasic"
~~~~~~~~~~~~
My Code
Dim DBConn As SqlConnection
Dim DBAdd As New SqlCommand
Dim strConnect As String = ConfigurationManager.ConnectionStrings("ProtoCostConnectionString").ConnectionString
DBConn = New SqlConnection(strConnect)
DBAdd.CommandText = "INSERT INTO D12_MIS (" _
& "CSJ, EST_DATE, RECORD_LOCK_FLAG, EST_CREATE_BY_NAME, EST_REVIEW_BY_NAME, m2_1, m2_2_date, m2_3_date, m2_4_date, m2_5, m3_1a, m3_1b, m3_2a, m3_2b, m3_3a, m3_3b" _
& ") values (" _
& "'" & Replace(vbCSJ.Text, "'", "''") _
& "', " _
& "'" & Replace(tmp1Date, "'", "''") _
& "', " _
& "'" & Replace(tmpRecordLock, "'", "''") _
& "', " _
& "'" & Replace(CheckedCreator, "'", "''") _
& "', " _
& "'" & Replace(CheckedReviewer, "'", "''") _
& "', " _
& "'" & Replace(vb2_1, "'", "''") _
& "', " _
& "'" & Replace(tmp2Date, "'", "''") _
& "', " _
& "'" & Replace(tmp3Date, "'", "''") _
& "', " _
& "'" & Replace(tmp4Date, "'", "''") _
& "', " _
& "'" & Replace(vb2_5, "'", "''") _
& "', " _
& "'" & Replace(vb3_1a, "'", "''") _
& "', " _
& "'" & Replace(vb3_1b, "'", "''") _
& "', " _
& "'" & Replace(vb3_2a, "'", "''") _
& "', " _
& "'" & Replace(vb3_2b, "'", "''") _
& "', " _
& "'" & Replace(vb3_3a, "'", "''") _
& "', " _
& "'" & Replace(vb3_3b, "'", "''") _
& "')"
DBAdd.Connection = DBConn
DBAdd.Connection.Open()
DBAdd.ExecuteNonQuery()
DBAdd.Connection.Close()
CREATE TABLE #T(branchnumber VARCHAR(4000))
insert into #t(branchnumber) values (005)
insert into #t(branchnumber) values (090)
insert into #t(branchnumber) values (115)
insert into #t(branchnumber) values (210)
insert into #t(branchnumber) values (216)
[code]....
I have a parameter which should take multiple values into it and pass that to the code that i use. For, this i created a parameter and temporarily for testing i am passing some values into it.Using a dynamic SQL i am converting multiple values into multiple records as rows into another variable (called @QUERY). My question is, how to insert the values from variable into a table (table variable or temp table or CTE).OR Is there any way to parse the multiple values into a table. like if we pass multiple values into a parameter. those should go into a table as rows.
Hello,
I run the DTS to copy data from Progress to SQL Server. How can match/convert the date variables to check.
The field p-date as format 'mm-dd-year' . It has the value of 10/09/2001.
The field s-date as varchar format. It has the value 2001-10-09.
How can use the where condition ( Select ...... WHERE p-date = s-date.)
Thanks
When trying to upsize an access database to sql server using the upsize wizard, I get the following error:
"Object variable or With block variable not set."
Any assistance is greatly appreciated.
Hello!
I'm using SQL Server 2000.
I have a variable which contains the name of another variable scoped in my stored procedure. I need to get the value of that other variable, namely:
DECLARE @operation VARCHAR(3)
DECLARE @parameterValue VARCHAR(50)
SELECT @operation='DIS'
CREATE table #myTable(value VARCHAR(20))
INSERT into #myTable values('@operation')
SELECT top 1 @parameterValue = value from #myTable
-- Now @parameterValue is assigned the string '@operation'
-- Here I need some way to retrieve the value of the @operation variable I declared before (in fact
-- another process writes into the table I retrieved the value from), in this case 'DIS'
DROP TABLE #myTable
I've tried several ways, but didn't succeed yet!
Please tell me there's a way to solve my problem!!!
Thank you very much in advance!
I have an SSIS package that creates a csv file based on a execute sql task.
The sql is incredibly simple select singlecolumn from table.
In the properties of the execute sql task I specify the result set as "full result set" when I run it I get the error that: Error:
The type of the value being assigned to variable "User::CSVoutput" differs from the current variable type.
Variables may not change type during execution. Variable types are strict, except for variables of type Object.
If I change the resultset to single row then I only get the first row from the DB (same if I choose none), If I choose XML then I get the error that the result is not xml. What resultset type do I need to choose in order to get all the rows into the CSV? The variable I am populating is of type string and is User::CSVoutput
While I was processing the cubes, error "Object Variable Or With Block Variable Not Set" prompt out,
what does it mean ?
Please help !!!
Is there any way to use a 2 dimensional array of strings as the Variable Enumerator for the "Foreach From Variable Enumerator". I am trying to copy a collection of files from folder A to folder B. In a script, I would populate, let us say, an array of (2,10), for 10 files, with one column representing the source file and other column representing the target column task. Then I would like to set this string array variable as the "Variable Enumerator" for the "Foreach From Variable Enumerator" and use file system tasks in the foreach loop to perform the tasks. The problem is that the "Foreach From Variable Enumerator" does not let me choose an index, but passes only one index 0, so, I will only be able to pass just one column. How do I let the foreach enumerator let me choose an index. The other foreach enumerators, foreach item and ADO give me the option to select index. I would like the same functionality in the foreach variable.
Note: I cannot use the "For Each File" enumerator, since the files are to be selected by a script only.
Thanks for the help.
I am trying to set a vaiable from a select statement
DECLARE @VALUE_KEEP NVARCHAR(120),
@COLUMN_NAME NVARCHAR(120)
SET @COLUMN_NAME = (SELECT COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = 'CONTACTS' AND COLUMN_NAME = 'FIRSTNAME')
SET @VALUE_KEEP = (SELECT @COLUMN_NAME FROM CONTACTS WHERE CONTACT_ID = 3)
PRINT @VALUE_KEEP
PRINT @COLUMN_NAME
RESULTS
-------------------------------------------------------------------------------------------
FirstName <-----------@VALUE_KEEP
FirstName <-----------@COLUMN_NAME
SELECT @COLUMN_NAME FROM CONTACTS returns: FirstName
SELECT FirstName from Contacts returns: Brent
How do I make this select statement work using the @COLUMN_NAME variable?
Any help greatly appreciated!
I've got two Sql Tasks on my dtsx. The first one loads a value into "Proyecto" user variable and the second one executes a variable named "SegundoProceso" which contains from the beginning:
"select Fecha from LogsCargaExcel where Proyecto = " + @[User::Proyecto] +""
As SqlSourceType propety I have "Variable" and inside ResultSet or Parameter Mapping nodes there is nothing.
[Execute SQL Task] Error: Executing the query ""select Fecha from LogsCargaExcel where Proyecto = " + @[User::Proyecto] +""" failed with the following error: "Cannot use empty object or column names. Use a single space if necessary.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Where am I wrong?
TIA
Hi,
I have an Execute SQL Task (OLE DB Connnection Manager) with a SQL script in it. In this script I use several SQL variables (@my_variable). I would like to assign an IS variable ([User::My_Variable]) to one of my SQL variables on this script. Example:
DECLARE @my_variable int
, <several_others>
SET @my_variable = ?
<do_some_stuff>
Of course, I also set up the parameter mapping.
However, it seems this is not possible. Assigning a variable using a ? only seems to work in simple T-SQL statements.
I have several reasons for wanting to do this:
- the script uses several variables, several times. Not all SQL variables are assigned via IS variables.
- For reading and mainenance purposes, I prefer to pass the variable only once. Otherwise every time the script changes u need to keep track of all questionmarks and their order.
- Passing the variable once also makes it easier to design the script outside IS using Management Studio.
- This script only does preparation for the actual ETL, so I prefer to keep it in one task instead of taking it apart to several consecutive Execute SQL Tasks.
- I prefer to use the OLE DB connection manager because it's a de facto standard here.
Could anyone help me out with the following questions:
- Is the above possible?
- If so, how?
- If not, why not?
- If not, what would be the best way around this problem?
Thanx in advance,
Pipo
How can I inside a DFT set a System variable, for example "TaskName" to an own created User Variable?
The reason is that I need to use this variable later in the Control Flow.
Regards
Riccardo