Environment: Visual Studio V8.0.50727.42 (RTM.050727-4200) Installed Products: Visual Studio Team Explorer V8.0.50727.127
The Variables are not available to the IDE. I cannot 1) Open the Variables Window (View > Other Windows > Variables), 2) Add or Edit Variables (SSIS > Variables).
I am preparing to re-install Visual Studio. Has anyone else seen this behavior? Is it a "feature" of some sort?
Hi,
I am not comfortable with DTS 2000 but I need to execute a encapsulated DTS 2000 package from a SSIS package. The real problem is when I need to pass SSIS variables to DTS 2000 package. The DTS 2000 package have 3 global variables that I can identify on " Execute DTS 2000 Package Task Editor - Inner Variables ". I believe the SSIS variables must be mapped on " Execute DTS 2000 Package Task Editor - OuterVariables ". How can I associate the SSIS variables(OuterVariables ) to "Inner Variables"? How can I do it? Much Thanks.
João
Hi,
I would like to design a SSIS package, which have couple of variables. It loads a xls file specified in a variable [varExcelFileFullPath] .
I will run it by commands: exec xp_cmdshell 'dtexec /SQL ....' (pls see an example below).
It seems it does not get the values passed in for those variables. I deployed the package to a sql server.
are there any grammar errors here? I copied it from dtexecui. It worked inside Dtexecui not in dos command.
exec xp_cmdshell 'dtexec /SQL "LoadExcelDB" /SERVER test /USER *** /PASSWORD ****
/MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EW
/LOGGER "{6AA833A1-E4B2-4431-831B-DE695049DC61}";"Test.SuperBowl"
/Set Package.Variables[User::varExcelFileName].Properties[Value];"TestAdHocLayer"
/Set Package.Variables[User::varExcelWorkbookName].Value;"Sheet1$"
/Set Package.Variables[User::varExcelFileFullPath].Value;"D: estshareTestAdHocLayer.xls"
/Set Package.Variables[User::varDestinationTableName].Value;"FeaturesTmp"
/Set Package.Variables[User::varPreSQLAction].Value;"delete from FeaturesTmp"
'
thanks,
Guangming
I must introduce myself... Kris Allain. I am a VERY new DBA. Basically I as sort of pushed into the position even though I have no previous DBA experience. I come more from a Net Admin background although I've only graduated with a degree in MIS 2.5 years ago.
With that said, I ran into a problem last week in which took down a mission critical application for 4 hours. We have an app that his highly transactional and I'm using the Full Recovery method for this DB with weekly full backups, daily differential backups, and hourly log backups. Someone (could have been me) disabled the log backup job and a couple of days later the log grew until there was no more disk space (35+ gb). Well, it took me 4 hours to back up and shrink the log and get the system up and running again.
I told my boss what had happened and now he wants to know who did it. I told him it could've possibly been me, but I highly doubt it because it appears to have been disabled between 7-8pm on my "work from home" day, which I specifically remeber packing it up and playing xbox at 4:30pm.
Could someone help me figure out what happened and if there it is possible to track these changes in the future?
Has anyone ever seen TCP/IP become a disabled protocol without manual intervention from a user?
My websites just stopped talking to my MSSQL db and when I went into sql client config utility on the web boxes, tcp/ip was disabled. Any clues? Can't find anything to support this in the event or web logs.
While in the design window of a table, I click the properties button and click the Relationships tab. Here everything is grayed out, and I can't drag and drop to create relationships in my Diagram either. Its like things are locked up right now. Can any of you give me some direction? thanks
View 1 Replies View RelatedMy production database has a maintenance plan that rebuilds all indexes and it's scheduled to run every day at 5 AM.
I disabled some nonclustered indexes that were not used by any execution plan I found, and run a Profiler session to catch any negative impact in performance.
But I found that the indexes were re-enabled the next day by the Rebuild Index task from the maintenance plan.
Is there a way to keep those index disabled? I don't want to drop them as I could have to re-enable some of them by users' request.
Thanks!
Hi all,Is there any way I can know who Disabled a Job??bye.
View 4 Replies View Relatedhi, all my toolbars except for the standard toolbar in SSRS are disabled. I cannot use anything. For example, I selected the formatting toolbar and it appears on the bottom of the standard toolbar, but I cannot select anything because it's all greyed out. Any suggestions. Thanks.
View 5 Replies View RelatedI having problem of using SQL Server management studio to create a database. Database have alot of colume, if i want to make column 1 to disabled, may i know how to set it?
View 3 Replies View RelatedHello every body,
I have a scenario where i have 6 parameters
Servername
Drive
Asofday
ProjectedDays
Percentage Limit
Nooddaystocalculateaverage.
The report functionality is working fine with the provided parameters,but the problem is one of the parameter Asofday is getting disabled until then servername and drive are provided and a click on the other remaining three parameters.
i have default for this asofday for today, and i feel that because of default parameter only it is getting disabled. i removed the default and is working fine wihtout getting disabled.
As this Asofday is of thirdplace in parameters list, i moved it to firstplace,it works fine here also.
What is happening when i supplied default and moved to third place?
If any one of you experienced any issue like this.pls share .
Thank you,
Raj Deep.a
Hi,
I'm using SQL Server 7.0. I'd like to know if there is anywhere in the information schema or system tables where I can tell that a constraint has been flagged as 'enable constraint for INSERT AND UPDATE' or not.
Thanks in advance,
Darrin
Hello all,
Here's the problem I'm trying to solve:
I have several alerts set up and a job setup to notify via email if alerts occur. There are times when I might be doing maintenace on a box that may generate alerts but I don't want to get emailed or paged for these "dummy" alerts. I thought first of setting the enabled column of sysalerts to 0 - that doesn't work. I still get notified. Then I thought I'd set the enabled column in sysjobs for my notification job to 0 while I'm doing the work. But as soon as I re-enable the job I get an alert. It seems that as soon as the job is re-enabled it checks the NT application log and sees that an alert was fired and somehow knows that there was no notification sent so sends one. If I purge the NT application log before re-enabling the job is solves the problem. But that is a very in-ellegant solution and I don't want to loose all the info stored in the event log any way. Does anyone know how SQL SErver aggent keeps track of this stuff? (ie. that an alert was fired but it's response job is disabled and to check once a job is re-enabled to see if any alerts occured while it was disabled?) I did a Profiler trace while re-enabling the job but didn't see anything pertinant in there.
Thanks in advance.
Patrick
Has anyone seen the following situation?
1) SQL Executive stops running jobs
2) The only way I can get it to START running jobs is to reboot the server
3) When SQL Server and executive come back up, a number of the tasks have been DISABLED! (I have seen this happen over and over on my SQL 6.5 SP4 instances.)
If you have seen this situation, have you found a way to prevent it? (ie: procedure or bug fix, etc.)
Thanks for your help!
Just curious to hear if anyone else has experiences this or knows a reason
why it maybe should be this way...
I have some jobs that are disabled accourding to the Job Activity Monitor view in Mgmt Studio. However, if I open the schedules details, this view says Enabled. Can a schedule be enabled for a job, even if the job in itself is
disabled maybe?
But, I can't see any enable/disable flag in the sysjobschedules table,
only in sysjobs.
Hi,
I have been scheduling jobs from past couple months on production but it does not execute on the scheduled time.
I checked the schedule enabled tab, it was enabled when i scheduled the job, but was disabled at a later date when i checked to see why the job did not run.......
Can some one please guide me if there is any process in SQL which disables the jobs automatically.
I want to find out how the jobs when scheduled and enabled gets disabled on its own.
Is there something that would cause a SQL Login to get disabled
automatically? The login was used successfully yesterday but today we
were getting an error:
Login failed for user '<sql login>'. Reason: The account is disabled. [CLIENT: ipaddress]
Perhaps someone accidentally disabled this but that sounds unlikely.
I didn't see anything in the log about the account getting disabled.
Michelle
I have a weird problem going on :
my SB configuration involves 3 servers. Server A sends a message to Server B. there's a stored proc on Server B that is being activated (using Activation), does some processing and sends the message to server C. on C there's another SP that is activated and it's supposed to insert a record into a table.
My problem is that on Server C, the record doesn't get inserted when activation is set to ON.
when activation is off on C and I run the proc manually, everything works fine, but when activation is on, the record doesn't get inserted. after this happened I tried to fire the proc manually and I got the following error :
Msg 9617, Level 16, State 1, Procedure spMSG_ReceiveMessagesOnSubscriber, Line 52
The service queue "TargetQueue" is currently disabled.
I am using the following code for activation on server C :
ALTER QUEUE TargetQueue
WITH STATUS = ON,
ACTIVATION (
STATUS = ON,
PROCEDURE_NAME = [Message].[spMSG_ReceiveMessagesOnSubscriber],
MAX_QUEUE_READERS = 5,
EXECUTE AS OWNER );
am I doing anything wrong ?
Thank you
I.
Hello,
Im trying to find out what triggers in a database are disabled.
In SQL2000 I could use
Code Block
select name from sysobjects where status & 2048 > 0 and type = 'TR'
because the status field delivers information.
In SQL2005 status is always 0 so no indication if the trigger is enabled or disabled.
Do you have any idea to find out what triggers in a database are disabled?
Cheers,
Manolo
Hi all -
I have an event in my sql server 2005 box that is fired every 5 seconds. Source MSSQLSERVER event ID 9274.
The activated proc [dbo].[sp_sysmail_activate] running on queue msdb.dbo.ExternalMailQueue output the following: 'The service queue "ExternalMailQueue" is currently disabled.'
I don't know anything about this queue that is mentioned above. How do I disable this message or get rid of that queue?
TIA
Hi,
I receive messages in my target queue but target queue continously become disabled even aften I enable and receive message it still says target queue is disabled?
Please Guide
Should I disable IIS on SQL Server 2005? Is there any reason that I should keep it around? I know that it is necessary for reporting services, but our database servers are on a seperate server from our reporting server. We have reporting services running on a stand alone box by itself.
View 1 Replies View Relatedwe learned that they cannot be hidden dynamically, but what about disabled, ie not allowed to dropdown, grayed out?
View 4 Replies View RelatedI have a windows service that uses SqlDependency. It has been working fine until today where it has died. I have traced the problem back to the service broker being disabled, however I have not disabled the service broker. Is there anyway that the service broker can become disabled ?
View 1 Replies View RelatedI am building a website with VS2005Standard. Onto an empty aspx page I drag a SqlDataSource control. In the "Configure datasource" dialogs I connect it with the SQL database file of my web app. In the "Configure the SQL statement" tab I select "*" for the columns and open the "advanced" dialog (I don't know the exact english terms because I use the german version) because I want to create INSERT, UPDATE AND DELETE statements separately. BUT: the upper checkbox (i.e. both checkboxes) is disabled! What can I do the get it enabled.
View 3 Replies View RelatedI'm attached to two different SQL 7 servers and neither one has the options enabled for full-text indexing. I am the DBO for those databases and the services are running.
Any ideas what's missing? I'm using SQL 7 clients tools on my NT Workstation.
Also, are there samples of using the index/search within ASP?
I manage a remote SQL Server 7 box that has the full-text engine installed and running great. However, I am unable to access the full-text options from the Enterprise Manager remotely through my firewall from my NT Workstation or from another NT Server with the EM installed. ALL other functions of the Enterprise Manager work fine through the firewall.
When using the Enterprise Manager from a Win98 machine at home, I can connect to the remote server and all the full-text options are enabled. So... I deduce that the firewall must be the problem.
Does anyone have any clues about this? Do the full-text options via the MMC use a different port than the 1433? Does it require the RPC ports to be opened on the firewall (not likely to happen)? I can find no documentation that states that the full-text options have any port requirements different than those of the normal SQL Server management options.
Any help is appreciated.
If a job is currently running and I want to disable it so that it does not run as scheduled for the following night, will it disrupt the current process?
View 1 Replies View RelatedHello, everyone:
I installed SQL Server 2000 with full compenents. But full text search is disabled (grayed out). SP4 is on it.
Any suggestion will be appreciated.
Thanks
ZYT
How to configure alert when SQL Server Agent Job gets disabled. I want to get notified when Agent Job gets disabled.
View 2 Replies View RelatedI see Named Pipes disabled by default in SQL 2005. Is this for any specific reasons?
View 1 Replies View RelatedHi,
This is really a Visual Studio 2005 Report Designer problem but I didn't see a good place to post this question in the Visual Studion forum.
On some reports when looking at the Data tab the Generic Query Designer is disabled. Anybody know why? The report runs. Other reports have it enabled.
I am using Visual Studio 2005 sp1.
Thanks,
Darren
Hi,
I've got a problem with paging and the ReportViewer. Here's how it goes:
First, I got the ReportViewer set to "print layout" and my reports having the correct size for each layout (landscape or portrait). Everything is fine with this since the number of page in the report reflects perfectly the number of page you can navigate with.
However, there seem to be a problem with displaying the correct number of page at the loading of the report. In fact, if the report contains 5 pages, the navigation header with often only shows 4 pages total. But once I click "next page", the correct number of page is then computed.
I didn't have any problem with that until I got a 2 pages report. The problem is, the navigation header is showing 1 total page and the "next page" button is disabled. So I cannot click it. I can, however, "scroll" down with the mouse wheel. But, this isn't a viable solution since some of our clients don't have mice with wheels.
Is there an option to tell the ReportViewer to complet the page count before showing any data on screen?
Thanks
EDIT: I'm using WinForm ReportViewer.