Various Functions In TSQL
Apr 4, 2006Hi,
I have a good collection of UDFs in my store,anybody interested to get those plz echo I want...
:angel:
ADVERTISEMENT
Functions Tsql
Nov 16, 2007ive created a function OrdersAmount that will accept two parameters: the start date and the end
date, and that will return the total order amount between those two dates. i am testing
the function by listing the rows from the table and the function result.
but i am getting some syntax errors
create function dbo.OrdersAmount(@startdate datetime, @enddate datetime)
returns int
as
begin
declare @return int
set @return = (select sum(od.UnitPrice * od.OrderQty * (1-od.unitpriceDiscount)) as totalorderamount from Orderdetails od
inner join orders o on od.salesorderid=o.salesorderid
where orderdate between @startdate and @enddate)
return @return
end
Msg 8117, Level 16, State 1, Procedure OrdersAmount, Line 6
Operand data type nvarchar is invalid for multiply operator.
would anybody know why?
TSQL - PARTITION BY / OVER Functions
Sep 5, 2007Hi,
Are the functions
PARTITION BY and OVER exist in SQL SERVER 2000?
Can I have an example please?
Thanks in advance,
Aldo.
SQL Server 2005: CLR Functions Vs SQL Functions
May 26, 2006I was playing around with the new SQL 2005 CLR functionality andremembered this discussion that I had with Erland Sommarskog concerningperformance of scalar UDFs some time ago (See "Calling sp_oa* infunction" in this newsgroup). In that discussion, Erland made thefollowing comment about UDFs in SQL 2005:[color=blue][color=green]>>The good news is that in SQL 2005, Microsoft has addressed several of[/color][/color]these issues, and the cost of a UDF is not as severe there. In fact fora complex expression, a UDF in written a CLR language may be fasterthanthe corresponding expression using built-in T-SQL functions.<<I thought the I would put this to the test using some of the same SQLas before, but adding a simple scalar CLR UDF into the mix. The testinvolved querying a simple table with about 300,000 rows. Thescenarios are as follows:(A) Use a simple CASE function to calculate a column(B) Use a simple CASE function to calculate a column and as a criterionin the WHERE clause(C) Use a scalar UDF to calculate a column(D) Use a scalar UDF to calculate a column and as a criterion in theWHERE clause(E) Use a scalar CLR UDF to calculate a column(F) Use a scalar CLR UDF to calculate a column and as a criterion inthe WHERE clauseA sample of the results is as follows (time in milliseconds):(295310 row(s) affected)A: 1563(150003 row(s) affected)B: 906(295310 row(s) affected)C: 2703(150003 row(s) affected)D: 2533(295310 row(s) affected)E: 2060(150003 row(s) affected)F: 2190The scalar CLR UDF function was significantly faster than the classicscalar UDF, even for this very simple function. Perhaps a more complexfunction would have shown even a greater difference. Based on this, Imust conclude that Erland was right. Of course, it's still faster tostick with basic built-in functions like CASE.In another test, I decided to run some queries to compare built-inaggregates vs. a couple of simple CLR aggregates as follows:(G) Calculate averages by group using the built-in AVG aggregate(H) Calculate averages by group using a CLR aggregate that similatesthe built-in AVG aggregate(I) Calculate a "trimmed" average by group (average excluding highestand lowest values) using built-in aggregates(J) Calculate a "trimmed" average by group using a CLR aggregatespecially designed for this purposeA sample of the results is as follows (time in milliseconds):(59 row(s) affected)G: 313(59 row(s) affected)H: 890(59 row(s) affected)I: 216(59 row(s) affected)J: 846It seems that the CLR aggregates came with a significant performancepenalty over the built-in aggregates. Perhaps they would pay off if Iwere attempting a very complex type of aggregation. However, at thispoint I'm going to shy away from using these unless I can't find a wayto do the calculation with standard SQL.In a way, I'm happy that basic SQL still seems to be the fastest way toget things done. With the addition of the new CLR functionality, Isuspect that MS may be giving us developers enough rope to comfortablyhang ourselves if we're not careful.Bill E.Hollywood, FL------------------------------------------------------------------------- table TestAssignment, about 300,000 rowsCREATE TABLE [dbo].[TestAssignment]([TestAssignmentID] [int] NOT NULL,[ProductID] [int] NULL,[PercentPassed] [int] NULL,CONSTRAINT [PK_TestAssignment] PRIMARY KEY CLUSTERED([TestAssignmentID] ASC)--Scalar UDF in SQLCREATE FUNCTION [dbo].[fnIsEven](@intValue int)RETURNS bitASBEGINDeclare @bitReturnValue bitIf @intValue % 2 = 0Set @bitReturnValue=1ElseSet @bitReturnValue=0RETURN @bitReturnValueEND--Scalar CLR UDF/*using System;using System.Data;using System.Data.SqlClient;using System.Data.SqlTypes;using Microsoft.SqlServer.Server;public partial class UserDefinedFunctions{[Microsoft.SqlServer.Server.SqlFunction(IsDetermini stic=true,IsPrecise=true)]public static SqlBoolean IsEven(SqlInt32 value){if(value % 2 == 0){return true;}else{return false;}}};*/--Test #1--Scenario A - Query with calculated column--SELECT TestAssignmentID,CASE WHEN TestAssignmentID % 2=0 THEN 1 ELSE 0 END ASCalcColumnFROM TestAssignment--Scenario B - Query with calculated column as criterion--SELECT TestAssignmentID,CASE WHEN TestAssignmentID % 2=0 THEN 1 ELSE 0 END ASCalcColumnFROM TestAssignmentWHERE CASE WHEN TestAssignmentID % 2=0 THEN 1 ELSE 0 END=1--Scenario C - Query using scalar UDF--SELECT TestAssignmentID,dbo.fnIsEven(TestAssignmentID) AS CalcColumnFROM TestAssignment--Scenario D - Query using scalar UDF as crierion--SELECT TestAssignmentID,dbo.fnIsEven(TestAssignmentID) AS CalcColumnFROM TestAssignmentWHERE dbo.fnIsEven(TestAssignmentID)=1--Scenario E - Query using CLR scalar UDF--SELECT TestAssignmentID,dbo.fnIsEven_CLR(TestAssignmentID) AS CalcColumnFROM TestAssignment--Scenario F - Query using CLR scalar UDF as crierion--SELECT TestAssignmentID,dbo.fnIsEven_CLR(TestAssignmentID) AS CalcColumnFROM TestAssignmentWHERE dbo.fnIsEven(TestAssignmentID)=1--CLR Aggregate functions/*using System;using System.Data;using System.Data.SqlClient;using System.Data.SqlTypes;using Microsoft.SqlServer.Server;[Serializable][Microsoft.SqlServer.Server.SqlUserDefinedAggregate (Format.Native)]public struct Avg{public void Init(){this.numValues = 0;this.totalValue = 0;}public void Accumulate(SqlDouble Value){if (!Value.IsNull){this.numValues++;this.totalValue += Value;}}public void Merge(Avg Group){if (Group.numValues > 0){this.numValues += Group.numValues;this.totalValue += Group.totalValue;}}public SqlDouble Terminate(){if (numValues == 0){return SqlDouble.Null;}else{return (this.totalValue / this.numValues);}}// private accumulatorsprivate int numValues;private SqlDouble totalValue;}[Serializable][Microsoft.SqlServer.Server.SqlUserDefinedAggregate (Format.Native)]public struct TrimmedAvg{public void Init(){this.numValues = 0;this.totalValue = 0;this.minValue = SqlDouble.MaxValue;this.maxValue = SqlDouble.MinValue;}public void Accumulate(SqlDouble Value){if (!Value.IsNull){this.numValues++;this.totalValue += Value;if (Value < this.minValue)this.minValue = Value;if (Value > this.maxValue)this.maxValue = Value;}}public void Merge(TrimmedAvg Group){if (Group.numValues > 0){this.numValues += Group.numValues;this.totalValue += Group.totalValue;if (Group.minValue < this.minValue)this.minValue = Group.minValue;if (Group.maxValue > this.maxValue)this.maxValue = Group.maxValue;}}public SqlDouble Terminate(){if (this.numValues < 3)return SqlDouble.Null;else{this.numValues -= 2;this.totalValue -= this.minValue;this.totalValue -= this.maxValue;return (this.totalValue / this.numValues);}}// private accumulatorsprivate int numValues;private SqlDouble totalValue;private SqlDouble minValue;private SqlDouble maxValue;}*/--Test #2--Scenario G - Average Query using built-in aggregate--SELECT ProductID, Avg(Cast(PercentPassed AS float))FROM TestAssignmentGROUP BY ProductIDORDER BY ProductID--Scenario H - Average Query using CLR aggregate--SELECT ProductID, dbo.Avg_CLR(Cast(PercentPassed AS float)) AS AverageFROM TestAssignmentGROUP BY ProductIDORDER BY ProductID--Scenario I - Trimmed Average Query using built in aggregates/setoperations--SELECT A.ProductID,CaseWhen B.CountValues<3 Then NullElse Cast(A.Total-B.MaxValue-B.MinValue ASfloat)/Cast(B.CountValues-2 As float)End AS AverageFROM(SELECT ProductID, Sum(PercentPassed) AS TotalFROM TestAssignmentGROUP BY ProductID) ALEFT JOIN(SELECT ProductID,Max(PercentPassed) AS MaxValue,Min(PercentPassed) AS MinValue,Count(*) AS CountValuesFROM TestAssignmentWHERE PercentPassed Is Not NullGROUP BY ProductID) BON A.ProductID=B.ProductIDORDER BY A.ProductID--Scenario J - Trimmed Average Query using CLR aggregate--SELECT ProductID, dbo.TrimmedAvg_CLR(Cast(PercentPassed AS real)) ASAverageFROM TestAssignmentGROUP BY ProductIDORDER BY ProductID
View 9 Replies View RelatedEquivalent Tsql For Sql Server 2000 Is Needed [from Sql Server 2005 Only Tsql]
Nov 19, 2007Can anyone please give me the equivalent tsql for sql server 2000 for the following two queries which works fine in sql server 2005
1
-- Full Table Structure
select t.object_id, t.name as 'tablename', c.name as 'columnname', y.name as 'typename', case y.namewhen 'varchar' then convert(varchar, c.max_length)when 'decimal' then convert(varchar, c.precision) + ', ' + convert(varchar, c.scale)else ''end attrib,y.*from sys.tables t, sys.columns c, sys.types ywhere t.object_id = c.object_idand t.name not in ('sysdiagrams')and c.system_type_id = y.system_type_idand c.system_type_id = y.user_type_idorder by t.name, c.column_id
2
-- PK and Index
select t.name as 'tablename', i.name as 'indexname', c.name as 'columnname' , i.is_unique, i.is_primary_key, ic.is_descending_keyfrom sys.indexes i, sys.tables t, sys.index_columns ic, sys.columns cwhere t.object_id = i.object_idand t.object_id = ic.object_idand t.object_id = c.object_idand i.index_id = ic.index_idand c.column_id = ic.column_idand t.name not in ('sysdiagrams')order by t.name, i.index_id, ic.index_column_id
This sql is extracting some sort of the information about the structure of the sql server database[2005]
I need a sql whihc will return the same result for sql server 2000
TSQL Or SQL CLR?
Aug 9, 2006Hello Friends, I am not sure if this is the right place to post this question but if not please suggest me when it can be posted.
I have been thinking of writing Stored procs in SQL CLR/ changing all of my Stored Procs to SQL CLR.
Is there any thing that I need to keep in mind about the size of the sotred proc (like calculation intensive) before I do that? I mean can even change a TSQL stored proc which is relatively small Stored Proc, that simply said Select * from Customers to SQL CLR? or the SQL CLR does only useful/makes difference with calculation intensive stored procs and big stored procs?
When I talked to our Architects they said every small sized stored proc can be written using SQL CLR and more over forget about the classic TSQL stored procs and get used to write SQL CLR when ever writing any database related stuff.
And also there are so many articles that discussed about the advantages of SQL CLR over the TSQL but I would appreciate if some one could put few bulletted points why do you think SQL CLR is more powerful.
Please advise.Thanks in advance,-L
TSQL Please Help
Jan 8, 2006Hi
I am creating some dynamic sql by passing variouse parametrs to my Stored Procedure. One of my Parameters is string has lots of values seperated by a comma to help build an 'IN' statement.
SET @SQL = 'SELECT * FROM areas'SET @p1 = '10,20'If @p1 IS NOT NULLBEGINSET @sSQL = @sSQL + ' WHERE (Areas IN (''' + Replace(@p1,',',''',''') + '''))'END
The above query runs perfecly well in Query Analyser, however when I put it into my ASP.NET application I get an error of "Error converting data type varchar to numeric."
So I think I need to do some sort of casting or Converting but im not sure how to do it. Or do I need to use a INSTRING?
I did manage to work out a method by using the follwoing
SELECT * FROM Areas WHERE PATINDEX('%,' + CAST(ArType AS VARCHAR) + ',%',',' + @p1 + ',') > 0
But I cant seem to convert the above line into coherent dynamic statement. My feeble attempt is below but I keep getting errors
SET @sql = @sql + ' WHERE PATINDEX(''%,'' + CAST(ArType AS VARCHAR) + '',%'','','' + @p1 + '','') > 0'
IM strugging to understand all the '''. My TSQL is pretty basic, any help would be much appreciated
Many thanks in advance
Tsql Help!
Mar 14, 2001simple update, I want to update max_seq with max(0rdr_seq) from another table.
how do you?
update h
set max_seq = d.max(ordr_seq)
from h_drug_stage_dup h
join drug_ordr_stage d
on h.patkey = d.patkey and
h.ordr_dtm= d.ordr_dtm and
h.h_drug = d.h_Drug
TSQL Help !
Jun 5, 2001Please see below ( in my sub-query I need to say settle_date = post_date +
3 business days )
How would this be done ? Pleas help !!!
declare @PD datetime, @MY_SD datetime
--SELECT @PD = SELECT POST_DATE FROM TRANSACTION_HISTORY
--select @MY_SD = @PD + 3 --T+3
--select @MY_SD = @MY_SD + case datepart(dw, @MY_SD) when 7 then 2 when 1 then 1 else 0 end*/
SELECT
WIRE_ORDER_NUMBER FROM TRANSACTION_HISTORY
WHERE POST_DATE BETWEEN '02/01/2001' AND '02/28/2001' AND
WIRE_ORDER_NUMBER IN
(
SELECT ORDER_NUMBER
FROM TRANSACTION_ARCHIVE WHERE TRANSACTION_ARCHIVE.ORDER_NUMBER = TRANSACTION_HISTORY.WIRE_ORDER_NUMBER
SETTLE_DATE = DATEADD(day, 3, POST_DATE ) case datepart(dw, POST_DATE) when 7 then 2 when 1 then 1 else 0 end))
Tsql
Oct 1, 2001Sql Server 7.0
==============
Hi all!
To find out the duplicate entries in a particular column,
I used the following tsql
select pno ,count(pno) from table1 group by pno
having count(pno)>1
But now I have another case where i have to test duplicity as a combination of 3 columns.
ie, for Eg :I have 3 columns with the following values.
colA colB colC
1 2 3===============row 1
1 3 5===============row 2
1 2 3===============row 3
1 4 5===============row 4
8 9 0===============row 5
I want to pick up all the duplicate rows(combo of colA,colB,colC)
duplicate rows here would be row 1 and row 3.
Can somebody give me a clue as to how to achieve this via TSQL.
Any help greatly appreciated.
TIA
Kinnu
TSQL
Oct 1, 2001HI,
I am creating a stored procedure where i need to update a table.
I have a field which has year as 2000-2001 i need to remove -2001
and just store it as 2000.I created a Procedure but i am getting an
error.
create PROCEDURE prdUpdate_Year
@year varchar(40)
As
@year = Mid(Newfiels,1,4)
UPDATE AddressBook SET AddressBook.Year = @year;
GO
Thanks
TSQL Help
Jun 5, 2000Hi,
I am trying to break up a column "name" into 2 columns "first name" and "last name". The name colum is currently "lastname, firstname". Is there an easy way to do this in SQL 6.5?
I successfully extracted the first name using:
firstname = rtrim(substring(name, (charindex(',', name)), 25))
But I am having trouble doing the lastname. Please help.
Thanks so much!
Laura
Tsql Help
Dec 6, 2000Hi,
I want to write a query which selects ind and
clcode where
ind(individual) has taken all 3 classes(clcode) 15, 16 and 17.
for example: it should only return data for ind 1 from the following data as only ind 1 has taken all three classes.
How can I write it?
table: ind_history
ind clcode
----------- -----------
1 16
1 17
2 17
1 15
2 16
3 11
4 15
TSQL Help
Aug 4, 2004I need help with a query that I want to incorporate into a scheduled DTS within SQL Server 2000. I have a process that brings in records from an Excel file, compares that day's records with any related information already stored in the database, then saves a table of joined records. This leaves me with any matches to the data. I need to filter out all but the most current record, which would be identified by a column named [DATE]. Ex:
Table tblMatchedRecords
M BLah Blah2 [DATE]
1 this that 20040101
2 this them 20040102
3 this that 20040630
In this example, I would like to have the record with [DATE] = 20040630 kept, and the others deleted. All columns do not always have to match exactly. I want to be able to specify which fields that need to match and pull only the latest date.
Make sense? Can anyone offer any suggestions?
Tsql Help
May 9, 2007I have a few variables declared
@amount=100000 (any big int)
@pamount=100000
@a1,@a2 - thorugh @25 -- each a bigint
@p1,@p2,@p3
@id - int
if @id is an odd number I need to randomly change @amount-@a1 (randomly to @a1 - @a25 so it ends up being any of 25 values)
and then @pamount randomly= to either @p1,@p2 or @p3
Can someone help me do the sql for this?
it will be within my stored procedure
SP Or TSQL
Nov 30, 2007Hi
Is there any sp or command to deactivate and activate all constraints in a database...
Thanks in Advance
RKNAIR
Tsql Help
Mar 4, 2008I have 2 sql server that are registered and linked.
If I have a table in server 1 that I want to make a backup of to server 2, how would I do that in t-sqlv(if the table did not already exisit on the second server)
Thanks
"Impossible is Nothing"
TSQL Help
Aug 22, 2005A stored procedure was running slowly so I took the code, removed thesubselect and included a join, then took the max and included as partof a correlated subquery.The result is below, however, this is no improvement over the original.An advice would be greatly appreciated.SELECT FSALT.FUNDING_LINE_TYPE_ID,A.PAYMENT_PERIOD_ID,A.CASH AS CASH,A.VOLUME AS VOLUMEFROM ACTUALS AINNER JOIN (SELECT MAX(COLLECTION_PAYMENT_PERIOD_*ID) AS CPP FROMACTUALS ACT WHERE COLLECTION_PAYMENT_PERIOD_ID<=*456) AS O ON O.CPP =A.COLLECTION_PAYMENT_PERIOD_IDINNER JOIN FS_ACTUAL_LINE_TYPES FSALT ON FSALT.FS_ACTUAL_LINE_TYPE_ID =A.FS_ACTUAL_LINE_TYPE_IDINNER JOIN PAYMENT_PERIODS PP ON PP.PAYMENT_PERIOD_ID =A.PAYMENT_PERIOD_IDWHEREA.ORG_ID=24771AND A.LSC_ORG_ID=5816AND PP.FUNDING_STREAM_ID=5AND PP.FUNDING_PERIOD_ID=6GROUP BYFSALT.FUNDING_LINE_TYPE_ID,A.PAYMENT_PERIOD_ID, A.CASH, A.VOLUME
View 2 Replies View RelatedHow Can This Be Done Using TSQL?
Feb 22, 2008I have a table that has a datetime field that needs a calculated time difference created when querying the table. I'm new to TSQL and I've been banging my head on this one. There is a time window that must be dealt with as well, so that any time that falls outside if the time window gets assigned a zero value (not calculated). The last record inside the window and the first record inside the window get calculated based on a given start and end time. The time outside the window is 7PM to 7AM. Here's an example:
in/outside window Time Value Calculation Time Diff (in minutes)
inside window time1 = '13:15:00' null the first record is always null
inside window time2 = '14:15:00' time2-time1 60
inside window time3 = '18:50:00' time3-time2 275
outside window time4 = '19:10:00' 18:59:59 - time3 10
outside window time5 = '21:00:00' 0 0
outside window time6 = '06:30:00' 0 0
outsidw window time7 = '06:45:00' 0 0
inside window time8 = '07:45:00' time8 - 07:00:00 15
How can this be done using TSQL? Let me know if more info is needed. Thanks!
TSQL - Using WHERE
Dec 25, 2007Hi guys,
The query below is running ok.
Code Block
USE test2006mdt
if object_id('AuxTable20071224132300') is not null exec('DROP TABLE AuxTable20071224132300')
SELECT DISTINCT
Stock.ACCOUNTKEY AS 'Stock.ACCOUNTKEY',
Stock.DOCNUMBER AS 'Stock.DOCNUMBER',
Stock.DOCUMENTID AS 'Stock.DOCUMENTID',
CASE WHEN Cast(Stock.DOCUMENTID as int) In ('1','35') THEN 'IN# ' + Cast(Stock.DOCNUMBER as varchar) WHEN Cast(Stock.DOCUMENTID as int) In ('3','120') THEN 'CM# ' + Cast(Stock.DOCNUMBER as varchar) ELSE '' END AS 'Invoice #',
Stock.VALUEDATE AS 'Stock.VALUEDATE',
Stock.TFTAL AS 'Stock.TFTAL',
Stock.CURRENCY AS 'Stock.CURRENCY',
CASE WHEN ReceiptJurnalMatch.SUF Is NULL THEN '0' ELSE -1 * ReceiptJurnalMatch.SUF END AS 'ReceiptJurnalMatch.SUF',
Stock.ID AS 'Stock.ID',
CASE WHEN ReceiptJurnalMatch.FULLMATCH Is NULL THEN '0' ELSE ReceiptJurnalMatch.FULLMATCH END AS 'ReceiptJurnalMatch.FULLMATCH'
INTO AuxTable20071224132300
FROM
RECEIPTJURNALMATCH
RIGHT OUTER JOIN JURNALTRANSMOVES ON RECEIPTJURNALMATCH.JURNALTRANSID = JURNALTRANSMOVES.ID
RIGHT OUTER JOIN STOCK
INNER JOIN ACCOUNTS ON STOCK.ACCOUNTKEY = ACCOUNTS.ACCOUNTKEY
INNER JOIN JURNALTRANS ON STOCK.ID = JURNALTRANS.STOCKID ON JURNALTRANSMOVES.TRANSID = JURNALTRANS.TRANSID
LEFT OUTER JOIN STOCKMOVES ON STOCK.ID = STOCKMOVES.STOCKID
WHERE
Stock.ACCOUNTKEY Between 'Account01' AND 'Account01'
AND Stock.Status Not In ('0','2')
AND Stock.DOCUMENTID In ('1','35','3','120')
ORDER BY Stock.ACCOUNTKEY
SELECT DISTINCT
[Stock.ACCOUNTKEY] AS 'Stock.ACCOUNTKEY',
[Stock.DOCNUMBER] AS 'Stock.DOCNUMBER',
[Stock.DOCUMENTID] AS 'Stock.DOCUMENTID',
[Invoice #] AS 'Invoice #',
[Stock.VALUEDATE] AS 'Stock.VALUEDATE',
[Stock.TFTAL] AS 'Stock.TFTAL',
[Stock.CURRENCY] AS 'Stock.CURRENCY',
Sum([ReceiptJurnalMatch.SUF]) AS 'Sum([ReceiptJurnalMatch.SUF])',
CASE WHEN CAST(DATEDIFF(dd,[Stock.VALUEDATE],GETDATE()) AS int) <= 30 THEN [Stock.TFTAL] - Sum([ReceiptJurnalMatch.SUF]) ELSE '' END AS '1-30',
CASE WHEN CAST(DATEDIFF(dd,[Stock.VALUEDATE],GETDATE()) AS int) BETWEEN 31 AND 60 THEN [Stock.TFTAL] - Sum([ReceiptJurnalMatch.SUF]) ELSE '' END AS '31-60',
CASE WHEN CAST(DATEDIFF(dd,[Stock.VALUEDATE],GETDATE()) AS int) BETWEEN 61 AND 90 THEN [Stock.TFTAL] - Sum([ReceiptJurnalMatch.SUF]) ELSE '' END AS '61-90',
CASE WHEN CAST(DATEDIFF(dd,[Stock.VALUEDATE],GETDATE()) AS int) > 90 THEN [Stock.TFTAL] - Sum([ReceiptJurnalMatch.SUF]) ELSE '' END AS '>> 90',
[Stock.TFTAL] - Sum([ReceiptJurnalMatch.SUF]) AS 'Balance'
FROM AuxTable20071224132300
WHERE Balance <> 0 ==> Getting ERROR!!!
GROUP BY [Stock.ACCOUNTKEY], [Stock.DOCNUMBER], [Stock.DOCUMENTID], [Invoice #], [Stock.VALUEDATE], [Stock.CURRENCY], [Stock.TFTAL]
The results are:
ACCOUNTKEY DOCNUMBER DOCUMENTID Invoice # VALUEDATE TFTAL CURRENCY SUF 1-30 31-60 61-90 >> 90 Balance
Account01 16917 35 IN# 16917 2007-12-25 00:00:00.000 15000 Euro 15000 0 0 0 0 0
Account01 16918 35 IN# 16918 2007-12-25 00:00:00.000 300 Euro 300 0 0 0 0 0
Account01 16919 35 IN# 16919 2007-12-25 00:00:00.000 110 Euro 110 0 0 0 0 0
Account01 16920 35 IN# 16920 2007-11-10 00:00:00.000 5 Euro 5 0 0 0 0 0
I inted to add a WHERE clause in order to Show Only Invoices with Balance <> 0, but getting Error.
Thanks in advance for any help.
Note: I am working under SQL SERVER 2000
Aldo.
Tsql
Oct 6, 2007Hi,
Knows anybody solution for this problem:
http://blog.vyvojar.cz/dotnet/archive/2007/10/05/226475.aspx
Thx a lot
SPs, Functions And
Feb 22, 2007Guys I need help with sql server 2005 syntax
My goal is up update a table called UserStats.
I have numerous functions in SQL that return Scalars (one for each statistics I want to use)
How do I then use a stored proceedure to return a table of the values for use on my site?
Functions?
Mar 25, 2006WIthin SQL Server 2005, there are functions. This feature is new to me and I haven't found anyone that has written their own fucntions? I'm wondering if functions are written the same as stored procedures, and can a function be called from a stored procedure or even from within a query.
First/Last Functions In SQL?
Mar 12, 2007hello Im having a difficult time translating this query from Access to SQL because it uses the First/Last functions.
I have a 'Projects' Table and a 'Project_Comments' table, each has a 'Project_ID' field which links the 2 together. What I need to do is retrieve a Project List from the Projects Table and also the first Comment of each project based on the Commend_date field in the Project_Comments table. This is the MS ACCESS query:
SELECT Projects.Project_Number, Projects.Project_Name, First(Project Comments.Comment_Date), First(Project_Comments.Notes)
FROM Projects Left Join Projec_Comments ON
Projects.Project_Number = Project_Comments.Project_Number
GROUP BY Projects.Project_Number, Projects.Project_Name
Now I can use Min() for the Date instead of First, however I dont know what to do with the Notes field. Any help on how to get this over to sql would be greatly appreciated!
Functions Help
Jun 3, 2008Hi,
I have created a function that returns a comma seperated list of product id's from a table. I need to call this function from a stored procedure to help filter my product results, something like the following:
SET @SQL = 'SELECT dbo.Products.ProductID FROM dbo.Products WHERE dbo.Products.ProductID IN (' + dbo.GetModels('dbo.Products.ProductID', '') + '))'
The problem I am having when executing the above is:
"Conversion failed when converting the varchar value 'dbo.Products.ProductID' to data type int."
Can anyone shed some light on how I can call the function, feeding through the product ID from the row of the select statement I am trying to execute (if this makes sense).
Any help would be great.
Matt
SQL Functions
Aug 25, 2005Iam trying to convert a date string to date format.....in access I could just use CDate, but SQL apparently does not allow this.
Any help appreciated
Thanks
Using Own Functions
Aug 12, 2005Hello,how I can use a function of my own within a select statement. I triedcreate function funny() returns intas beginreturn( 2 )end goand then "select funny()" but 'funny' is not a recognized function name.How can I solve this?thanks and regardsMark
View 1 Replies View RelatedFunctions
Jul 20, 2005Hi,,I'm having a problem with calling a function from an activex scriptwithin a data transformation. the function takes 6 inputs and returnsa single output. My problem is that after trying all of the stuff onBOL I still can't get it to work. It's on the same database and I'mrunning sql 2000.when I try to call it I get an error message saying "object requiredfunctionname" If I put dbo in front of it I get "object required dbo".Can anyone shed any light on how i call this function and assign theoutput value returned to a variable name.thanks.
View 7 Replies View RelatedSQL Functions
Aug 10, 2007Hello,
I've created a function that performs modulo. I understand that SQL server 2000 / 2005 uses % for modulo, but we have an application that was written for Oracle. Oracle has a mod(dividend, divisor) function.
As to not rewite the queries, I would like to implement the function below:
the function executes properly but I must prefix it with the dbo schema.
Net: I can execute --- select dbo.mod(9,2) and it returns a 1 just like it should.
but I can not execute --- select mod(9,2) I receive the error "'mod' is not a recognized function name." on SQL 2000 and 2005.
If I can execute select mod(9,2) then I won't need to re-write any queries.
Also, on SQL 2005, I have tried to adjust the default shema, and the execute as clause, but neither helped my cause.
I'm going to try building the function in the CLR, but I think I will be faced with the same problem.
Can someone point me in the right direction?
Thanks
Tom
create function mod
(
@dividend int,
@divisor int
)
RETURNS int
as
begin
declare @mod int
select @mod = @dividend % @divisor
return @mod
end
Functions In Functions
Sep 24, 2007Hi,
I have to calculate data in function with "EXEC". During runtime I get the Error:
"Only functions and extended stored procedures can be executed from within a function."
I would use a Stored Procedure, but the function is to be called from a view. I don't understand, why that should not be possible. Is there any way to shut that message down or to work around?
btw: Storing all the data in a table, would mean a lot of work, I rather not like to do. ;-)
Thx for any help
Blubb10
FUNCTIONS
Jun 14, 2007I just installed SSRS 2005 and I have experience with SQL.
How come this function does not work?
SELECT SUBSTRING(YEAR_MONTH, 1, 2) AS Expr1
FROM table1
I get a message which states that this command is not supported by the provider?
It works fine with other SQL tools like winsql?
thanks
SQL CE DLL Functions
Oct 25, 2007Can someone explain what the different SQL CE DLL's functions are? I can issue a successful merge replication and these seem to be the DLL's loaded just after it completes.
RSSWM.exe base address: 2C000000
=========================
sqlceoledb30.dll 00CB0000 35000 A
sqlceca30.dll 00CF0000 75000 A
sqlceqp30.dll 00D70000 DD000 A
sqlcese30.dll 00E50000 6A000 A
sqlceer30en.dll 00EC0000 24000 A
itcnetreg.dll 00EF0000 15000 A
itcswinsock.dll 00F10000 D000 A
itc50.dll 00F30000 27000 A
sqlceme30.dll 00F70000 10000 A
rsshelper.dll 00F80000 6000 A
tcpconnectiona.dll 00F90000 10000 A
edbgtl.dll 00FA0000 14000 A
itceventlog.dll 01110000 B000 A
rsaenh.dll 01350000 2B000 RO, H, S, C, RAM from ROM
iq_lapi_c_wrapper.dll 01B80000 27000 RO, XIP
ssapi.dll 01BB0000 17000 RO, XIP
mscoree2_0.dll 01D90000 C3000 RO, H, S, XIP
After some application activity, I attempt a merge replication again and it fails with a "DLL could not be loaded" yadda, yadda message. These seem to be the loaded DLL's at this point.
RSSWM.exe base address: 2C000000
=========================
sqlceqp30.dll 00D70000 DD000 A
sqlcese30.dll 00E50000 6A000 A
sqlceer30en.dll 00EC0000 24000 A
itcnetreg.dll 00EF0000 15000 A
itcswinsock.dll 00F10000 D000 A
itcadcdevmgmt.dll 00F20000 9000 A
itc50.dll 00F30000 27000 A
sqlceme30.dll 00F70000 10000 A
rsshelper.dll 00F80000 6000 A
tcpconnectiona.dll 00F90000 10000 A
edbgtl.dll 00FA0000 14000 A
itceventlog.dll 01110000 B000 A
rsaenh.dll 01350000 2B000 RO, H, S, C, RAM from ROM
iq_lapi_c_wrapper.dll 01B80000 27000 RO, XIP
ssapi.dll 01BB0000 17000 RO, XIP
mscoree2_0.dll 01D90000 C3000 RO, H, S, XIP
I'm at a loss as to why SQL CE cannot load unless I am out of my 32MB of process space for some reason.
(App on an Intermec 751 with WM5 and 128MB RAM)
TIA for any help
I Need Help With This Tsql Statement
Apr 2, 2007Every time I try this statement I keep getting a syntext error near count I must be over looking something can some one help me with this.
SELECT 'Quarter 1' as 'qtr' count(jobid) as 'transcount', count(distinct job.patientid) as 'patientcount', sum(job.LANGUAGE_TCOST) as 'lcost', Sum(job.LANGUAGE_DISC_COST) as 'dlcost', avg(LANGUAGE_DISC) as 'avgLDisc', (sum(job.LANGUAGE_TCOST) + sum(job.LANGUAGE_DISC_COST)) as 'LGrossAmtBilled', (sum(LANGUAGE_TCOST) / count(distinct job.patientid)) as 'PatAvgL', (sum(LANGUAGE_TCOST) / count(jobid)) as 'RefAvgL', sum(LANGUAGE_DISC) as 'avgPercentDiscL', JOB.JURISDICTION, PAYER.PAY_COMPANY, PAYER.PAY_CITY, PAYER.PAY_STATE, PAYER.PAY_SALES_STAFF_ID, JOB.INVOICE_DATE INVOICE_AR.INVOICE_DATE AS EXPR1, INVOICE_AR.AMOUNT_DUE
FROM JOB INNER JOIN INVOICE_AR ON JOB.JOBID = INVOICE_AR.JOBID LEFT OUTER JOIN PAYER ON PAYER.PAYERID = JOB.PAYER.ID LEFT OUTER JOIN STATES ON JOB.JURISDICTION = STATES.INITIALS
WHERE (INVOICE_AR.AMOUNT_DUE > 0)AND (INVOICE-AR.INVOICE_DATE BETWEEN @startdate and @enddate)AND (MONTH(INVOICE_AR.INVOICE_DATE) IN (1,2,3))AND (PAYER.PAYCOMPANY like '%' + @Company + '%') Group By JOB.JURISDICTION PAYER.PAY_COMPANY PAYER.PAY_CITY PAYER.PAY_STATE PAYER.PAY_SALES_STAFF_ID, JOB.INVOICE_DATE, INVOICE_AR.INVOICE_DATE, INVOICE_AR.AMOUNT_DUE
UNION ALL
SELECT 'Quarter 2' as 'qtr' count(jobid) as 'transcount', count(distinct job.patientid) as 'patientcount', sum(job.LANGUAGE_TCOST) as 'lcost', Sum(job.LANGUAGE_DISC_COST) as 'dlcost', avg(LANGUAGE_DISC) as 'avgLDisc', (sum(job.LANGUAGE_TCOST) + sum(job.LANGUAGE_DISC_COST)) as 'LGrossAmtBilled', (sum(LANGUAGE_TCOST) / count(distinct job.patientid)) as 'PatAvgL', (sum(LANGUAGE_TCOST) / count(jobid)) as 'RefAvgL', sum(LANGUAGE_DISC) as 'avgPercentDiscL', JOB.JURISDICTION, PAYER.PAY_COMPANY, PAYER.PAY_CITY, PAYER.PAY_STATE, PAYER.PAY_SALES_STAFF_ID, JOB.INVOICE_DATE INVOICE_AR.INVOICE_DATE AS EXPR1, INVOICE_AR.AMOUNT_DUE
FROM JOB INNER JOIN INVOICE_AR ON JOB.JOBID = INVOICE_AR.JOBID LEFT OUTER JOIN PAYER ON PAYER.PAYERID = JOB.PAYER.ID LEFT OUTER JOIN STATES ON JOB.JURISDICTION = STATES.INITIALS
WHERE (INVOICE_AR.AMOUNT_DUE > 0)AND (INVOICE-AR.INVOICE_DATE BETWEEN @startdate and @enddate)AND (MONTH(INVOICE_AR.INVOICE_DATE) IN (4,5,6))AND (PAYER.PAYCOMPANY like '%' + @Company + '%') Group By JOB.JURISDICTION PAYER.PAY_COMPANY PAYER.PAY_CITY PAYER.PAY_STATE PAYER.PAY_SALES_STAFF_ID, JOB.INVOICE_DATE, INVOICE_AR.INVOICE_DATE, INVOICE_AR.AMOUNT_DUE
UNION ALL
SELECT 'Quarter 3' as 'qtr' count(jobid) as 'transcount', count(distinct job.patientid) as 'patientcount', sum(job.LANGUAGE_TCOST) as 'lcost', Sum(job.LANGUAGE_DISC_COST) as 'dlcost', avg(LANGUAGE_DISC) as 'avgLDisc', (sum(job.LANGUAGE_TCOST) + sum(job.LANGUAGE_DISC_COST)) as 'LGrossAmtBilled', (sum(LANGUAGE_TCOST) / count(distinct job.patientid)) as 'PatAvgL', (sum(LANGUAGE_TCOST) / count(jobid)) as 'RefAvgL', sum(LANGUAGE_DISC) as 'avgPercentDiscL', JOB.JURISDICTION, PAYER.PAY_COMPANY, PAYER.PAY_CITY, PAYER.PAY_STATE, PAYER.PAY_SALES_STAFF_ID, JOB.INVOICE_DATE INVOICE_AR.INVOICE_DATE AS EXPR1, INVOICE_AR.AMOUNT_DUE
FROM JOB INNER JOIN INVOICE_AR ON JOB.JOBID = INVOICE_AR.JOBID LEFT OUTER JOIN PAYER ON PAYER.PAYERID = JOB.PAYER.ID LEFT OUTER JOIN STATES ON JOB.JURISDICTION = STATES.INITIALS
WHERE (INVOICE_AR.AMOUNT_DUE > 0)AND (INVOICE-AR.INVOICE_DATE BETWEEN @startdate and @enddate)AND (MONTH(INVOICE_AR.INVOICE_DATE) IN (7,8,9))AND (PAYER.PAYCOMPANY like '%' + @Company + '%') Group By JOB.JURISDICTION PAYER.PAY_COMPANY PAYER.PAY_CITY PAYER.PAY_STATE PAYER.PAY_SALES_STAFF_ID, JOB.INVOICE_DATE, INVOICE_AR.INVOICE_DATE, INVOICE_AR.AMOUNT_DUE
UNION ALL
SELECT 'Quarter 4' as 'qtr' count(jobid) as 'transcount', count(distinct job.patientid) as 'patientcount', sum(job.LANGUAGE_TCOST) as 'lcost', Sum(job.LANGUAGE_DISC_COST) as 'dlcost', avg(LANGUAGE_DISC) as 'avgLDisc', (sum(job.LANGUAGE_TCOST) + sum(job.LANGUAGE_DISC_COST)) as 'LGrossAmtBilled', (sum(LANGUAGE_TCOST) / count(distinct job.patientid)) as 'PatAvgL', (sum(LANGUAGE_TCOST) / count(jobid)) as 'RefAvgL', sum(LANGUAGE_DISC) as 'avgPercentDiscL', JOB.JURISDICTION, PAYER.PAY_COMPANY, PAYER.PAY_CITY, PAYER.PAY_STATE, PAYER.PAY_SALES_STAFF_ID, JOB.INVOICE_DATE INVOICE_AR.INVOICE_DATE AS EXPR1, INVOICE_AR.AMOUNT_DUE
FROM JOB INNER JOIN INVOICE_AR ON JOB.JOBID = INVOICE_AR.JOBID LEFT OUTER JOIN PAYER ON PAYER.PAYERID = JOB.PAYER.ID LEFT OUTER JOIN STATES ON JOB.JURISDICTION = STATES.INITIALS
WHERE (INVOICE_AR.AMOUNT_DUE > 0)AND (INVOICE-AR.INVOICE_DATE BETWEEN @startdate and @enddate)AND (MONTH(INVOICE_AR.INVOICE_DATE) IN (10,11,12))AND (PAYER.PAYCOMPANY like '%' + @Company + '%') Group By JOB.JURISDICTION PAYER.PAY_cOMPANY PAYER.PAY_CITY PAYER.PAY_STATE PAYER.PAY_SALES_STAFF_ID, JOB.INVOICE_DATE, INVOICE_AR.INVOICE_DATE, INVOICE_AR.AMOUNT_DUE Order By 'QTR' asc