Does anyone have a routine that can verify URL's in a database table. I have a table with several thousand website addresses and I would like a way to check and see which ones resolve and which return Page Not Found error. I quess my question is how do you interrogate a URL and what do you look for coming back? Novitiate for many I am sure but not for me.
Thank you.
Hi folks!
The boss has decided that the data from a table we have on one database (containing daily data) needs to be copied to a "history" table on a different database, on a different server.
The transfer will probably be done with a scheduled stored procedure, and all columns will be transferred EXCEPT for two columns in the source table, which are not present in the destination table. This means instead of an "INSERT Dest SELECT * FROM Source" I have to do an "INSERT Dest SELECT yada,yada,yada... FROM Source" in order to disregard the columns we don't care about. NO problem.
I was thinking (you should smell trouble - and sawdust burning at this point) that this leaves us open to a punch below the belt later when a new column is added to the Source table, since we are using a definitive list of columns to move rather than a *, and the new column could be added without the otherwise system-generated, *-sponsored "gentle reminder" that it also needs to be added to the Dest table. I'm not as convinced as The Boss that "Oh, I'm sure we'll remember to add it to the history table when that happens" :lol:
So, long story shorter (nah...too late for that) - I figure I can write a check at each day's historical transfer on the count of columns in one table verses the other, and send an email or fail the job if the count doesn't make sense.
For example, if the Source table has 34 columns, since we don't care about two of them, the Dest table should have 32 columns, if things are still in synch. OK, I think (insert burning sawdust smell here), I can use a SysObjects thang to count rows. BOL points out INFORMATION_SCHEMA.COLUMNS as a possibility.
Here is the code I think (sawdust) can be used:select ((select count(*) from SourceDb.INFORMATION_SCHEMA.columns
where table_name = 'Source') - (select count(*) from HISTSERVER.DestDb.INFORMATION_SCHEMA.columns
where table_name = 'Dest')) as ColumnDiff
Trouble is...this fails because apparently the INFORMATION_SCHEMA thang doesn't do well with remote servers.
Can anyone figure a way around this, or suggest an alternative? I'm still looking, but thought I'd also toss it out onto the board for your generous consideration.
Thanks - and can you BELIEVE the year is already 1/12th of the way OVER?!?!?!
Paul
Hey Folks...
Very new to SQL Server. I've inherited numorous SQL Servers and wanted to know how I can tell if a backup is scheduled and how I can tell if it completed successfully? Thanks in advance....
Mike D.
Hi guys,
View 4 Replies View RelatedHow do i do that... in sch lab, the lecturer said: Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click Try SqlDataSource2.SelectParameters("Title").DefaultValue = txtProductTitle.Text GridView1.DataBind() If GridView1.Rows.Count > 0 Then //if no repeated Label1.Text = "Existing Record Found. Please enter another Software." Else 'SqlDataSource1.Insert() 'Label1.Text = txtProductTitle.Text & " successfully added to the database." End If Catch ex As Exception Label1.ForeColor = Drawing.Color.Red Label1.Text = "An error occured!" & ControlChars.NewLine & ControlChars.NewLine & _ ex.Message.ToString() End Try End Sub but its not working for me... the GridView1.Rows.Count is always 0, if there is a repeat, it should be > 0
View 4 Replies View RelatedOK, so I'm working on a project that requires the dynamic generation of SQL statements. Now in Visual Studio .NET I'm sure many of you have used that wonderful visual database tool that allows you to magically "verify sql syntax" at the click of a button. It takes a query that looks like this:
"SELECT A.AFFID, A.UserName, A.Pass, A.FirstName, A.LastName, A.Company, A.Street, A.City, A.State, A.ZIP, A.Country, A.phone, P.EMail, A.RecieveEMail, A.SSN, A.JoinDate, A.AffType, P.ProductId, P.BuyerId FROM Affiliates A, Purchases P WHERE (ProductId > 0) ORDER BY 1"
and transforms it into something that looks like this:
"SELECT A.AFFID, A.UserName, A.Pass, A.FirstName, A.LastName, A.Company, A.Street, A.City, A.State, A.ZIP, A.Country, A.phone, P.Email, A.RecieveEMail, A.SSN, A.JoinDate, A.AffType, P.ProductID, P.BuyerID
FROM Affiliates A CROSS JOIN Purchases P
WHERE (P.ProductID > 0)
ORDER BY A.AFFID"
My question is: is there anything in the .NET platform that would allow me to achieve the same kind of result programatically (i.e. transform standard sql to tsql syntax and verify the syntax of the query at run time)?
Any help would be appreciated! Cheers.
To: All,
Hi, well thanks for reading this thread. Anyway I got a problem where i can't accurately verify whether a user had successfully login to my application.
I got a database to store the user name and password. So whenever a user login, i would use a while loop to read all the user name and password, and an if statement to verify whether the user's name and password matches to the ones stored in the database. This method doesn't work when there are multiple records in my database, because the if statement would compare the user given name and password with all the user name and password in the database. Hence resulting a mismatch.
Well I really hope that you understand what my problem is, really need help with this problem as I'm really clueless. Can somebody please help me, please teach me how to rectify this problem?
Well i think the core problem would be to compare the user name and password with the records in the database one at a time, and once it is found, stop comparing and allow user to enter site.
Yup I think that's all, sorry for the lengthy thread. Anyway thanks a million and have a nice day.
From: iaciz
How do I tell what SQL licensing option (processor, device CALS or user CALS) was taken when the server was installed? I have taken over a SQL 2005 server and I would like to check how many CALS (if any) it is licensed for.
View 2 Replies View RelatedI am trying to use msde for the startup kits. but i cannot connect to it. How can I do a simple test to verify it is installed and that I can log into the db?
Thanks
Ron
How can a tell if a tak completed succesfully from a stored procedure?
I have a task which is executed from a stored procedure. The sp_runtask only returns whether the task started successfully. How can I tell if it completed successfully?
Thanks
Is there a way that SQL can automatically look at each users'connection and make sure it is still connected through the third partyapplication? The problem is that when a connection to this applicationis not terminated properly, the SQL server is not notified of thedisconnect and the user cannot log back into the application until allthe processes are completed and the original session terminated.Thank you.
View 1 Replies View RelatedHello All,
I'm trying to develop a stored procedure that would do one of TWO things:
1. Return a 'status' that a value does not exist, if I were to provide the parameter via an ASP.NET2.0 page
2. If it does exists, to return the row data associated with that value (id number)
The stored procedure would search a SQL Server table within it self first. It that fails it would look at an Oracle table (work order table). And if that fails to return a 'row' to look through another Oracle table (work request table). If that doesn't occur, then it would throw the result as described in #2.
If the result exists in one of the TWO Oracle tables it would then insert that row into the first SQL Server table that the stored procedure searched through AND would return the row set to the ASP.NET page.
While all this is happening, I was hoping to get some insight as to how to create a "Please Wait..." feedback and then moving to the final result.
Looking forward to the wise words of the many on this forum, as I have experienced in the past! :)
Let me explain in simplified terms. We have an ETL process:
1) download data from the iSeries table Cust into SQL table Cust.
2) Tran_Cust is a view created FROM Cust
3) Copy from view Tran_Cust to table ods_Cust
4) v_ods_Cust is a view created from ods_Cust
I want to look for inconsistencies in the column definitions as a column moves from iSeries Cust, SQL Cust, view Tran_Cust, ods_Cust, view v_ods_Cust. The columns generally keep the same names except for v_ods_cust. Here a column like CustName will be created with a more meaningful column name - "CustName as 'Customer Name'.
We have hundreds of tables and we have column definition inconsistences where the host changed their column defintion and we made no changes on the SQL side. Or someone made a SQL column change in one table, but not both tables and the views were not dropped and recreated.
I have the list of tables. Think that I can put together some tsql to loop through the list of tables and create a new table based on the iSeries definition, then compare columns defintion across all the tables and views - except for the v_ods. THis is where columns are given new names - such as "CustName as 'Customer Name'". Need the actual view definition to find that CustName is 'Customer Name' and then compare the definition of ods_Cust.CustName to v_ods_Cust.[Customer Name]
How can I find the view definiton of say v_ods_Cust, seperate out the source column names (CustName) and destination column names (Customer Name) so that I can compare the source column names to another table and fine the differences?
hi, all.I want to verify data merged from access in sqlserver.but it has toomany records .so i need a tooldo this.someone maybe has it.thanks
View 1 Replies View RelatedI've seen a few posts in the MSDN documentation (see links below) stating that the MergeSynchronizationAgent no longer requires the STA threading model in SQL Server 2005 SP1. However, I'm still receiving the following exception message in my synchronization code (where it attempts to access the SynchronizationAgent property):
The MergeSynchronizationAgent class must be instantiated on a Single-Threaded Apartment (STA) thread.
I have Service Pack 1 for SQL Server 2005 installed on both my server as well as my local client (the client is running SQL Server 2005 Express). How can I verify the correct files are there (e.g. are the some specific date/time values for the RMO/COM objects?
Here's the list of MSDN links mentioned above:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=326837&SiteID=1
http://msdn2.microsoft.com/en-us/library/ms146869.aspx
http://msdn2.microsoft.com/en-us/library/microsoft.sqlserver.replication.mergesynchronizationagent.aspx
http://msdn2.microsoft.com/en-us/library/microsoft.sqlserver.replication.mergepullsubscription.synchronizationagent.aspx
I am using SQL Server 2005 and trying to create a linked server on Oracle 10. I used the commands below:
EXEC sp_addlinkedserver
@server = 'test1',
@srvproduct = 'Oracle',
@provider = 'MSDAORA',
@datasrc = 'testsource'
exec sp_addlinkedsrvlogin
@rmtsrvname = 'test1',
@useself = 'false',
@rmtuser='sp',
@rmtpassword='sp'
When I execute
select * from test1...COUNTRY
I get the error. "The OLE DB provider "MSDAORA" for linked server "...." does not contain the table "COUNTRY". The table either does not exist or the current user does not have permissions on that table."
The 'sp' user I am connecting is the owner of the table. What could be the problem ?
Thanks a lot.
I have created a table Table with name as Varchar and id as int. Now i have started inserting the rows like, insert into Table values ('arun',20).Yes i have inserted a row in the table. Now i have got the values " arun's ", 50. insert into Table values('arun's',20) My sqlserver is giving me an error instead of inserting the row. How will you solve this problem?
Hi
I am having a table called as status ,in that table one field is there i.e. currentstatus.
the rows which are having currentstatus as "ticket closed",i want to move those rows into other table called repository which is having same table structure as status table.
I can do programatically.
but is there any way for every 3 months system has to check and do this action means moving to repository table automatically?
Please help me.
Thanks.
I'm inserting from TempAccrual to VacationAccrual . It works nicely, however if I run this script again it will insert the same values again in VacationAccrual. How do I block that? IF there is a small change in one of the column in TempAccrual then allow insert. Here is my query
INSERT INTO vacationaccrual
(empno,
accrued_vacation,
accrued_sick_effective_date,
accrued_sick,
import_date)
[Code] ....
For reasons that are not relevant (though I explain them below *), Iwant, for all my users whatever privelige level, an SP which createsand inserts into a temporary table and then another SP which reads anddrops the same temporary table.My users are not able to create dbo tables (eg dbo.tblTest), but arepermitted to create tables under their own user (eg MyUser.tblTest). Ihave found that I can achieve my aim by using code like this . . .SET @SQL = 'CREATE TABLE ' + @MyUserName + '.' + 'tblTest(tstIDDATETIME)'EXEC (@SQL)SET @SQL = 'INSERT INTO ' + @MyUserName + '.' + 'tblTest(tstID) VALUES(GETDATE())'EXEC (@SQL)This becomes exceptionally cumbersome for the complex INSERT & SELECTcode. I'm looking for a simpler way.Simplified down, I am looking for something like this . . .CREATE PROCEDURE dbo.TestInsert ASCREATE TABLE tblTest(tstID DATETIME)INSERT INTO tblTest(tstID) VALUES(GETDATE())GOCREATE PROCEDURE dbo.TestSelect ASSELECT * FROM tblTestDROP TABLE tblTestIn the above example, if the SPs are owned by dbo (as above), CREATETABLE & DROP TABLE use MyUser.tblTest while INSERT & SELECT usedbo.tblTest.If the SPs are owned by the user (eg MyUser.TestInsert), it workscorrectly (MyUser.tblTest is used throughout) but I would have to havea pair of SPs for each user.* I have MS Access ADP front end linked to a SQL Server database. Forreports with complex datasets, it times out. Therefore it suit mypurposes to create a temporary table first and then to open the reportbased on that temporary table.
View 6 Replies View RelatedHi all,
The following dbo.Tables of Northwind.mdf in my .SQLEXPRESS (SQL Server Management Studio Express) are missing:
dbo.Categories
dbo.CustomerCustomerDemo
dbo.CustomerDemographics
dbo.Customers
dbo.Employees
dbo.EmployeeTerritories
dbo.Order Details
dbo.Orders
dbo.Products
dbo.Regions
dbo.Shippers
dbo.Suppliers
dbo.Territories.
But, I have these dbo.Tables in a different Database "xyzDatabase". How can I copy each of these dbo.Tables to the another blank dbo.Table of Northwind Database?
I right clicked on the dbo.Categories and I saw the following thing:
dbo.Categories
New Table...
Modify
Open Table
Script Table as |> CREATYE To |>
DROP To |>
SELECT To |>
INSERT To |> New Query Editor Window
File....
Clipboard
UPDATE To |>
DELETE to |>
From the above observation,I think it is possible to copy the dbo.Table from the one Database to the Northwind Database that needs to be repaired. Please help and advise me how to do this task or tell me where I can find the Microsoft document that gives the details of this X-copy thing.
Thanks in advance,
Scott Chang
P. S. I am using VB 2005 Express to create a project to learn "Calling Stored Procedures with ADO.NET" (see Paul Kimmel's article in http://www.developer.com/db/article.php/3438221) that needs the dbo.Tables of Northwind Database and my Northwind Database has been screwed up for quite a while and needs a big repair.
which is more efficient...which takes less memory...how is the memory allocation done for both the types.
View 1 Replies View Related'****************************************************************************
Cmd.CommandText = "Drop Table Raj"
Cmd.ExecuteNonQuery()
Cmd.CommandText = "Select * Into Raj From XXX"
Cmd.ExecuteNonQuery()
'**************************************************************************
This generates error that Table already exist.
If Wait 1 sec then execute statement then it works fine.
Thanks in Advance
Piyush Verma
I have one control table to store all related table name
Table ID TableName
1 TableA
2 TableB
In Table A:
RecordID Value
1 1
2 2
3 3
In Table B:
RecordID Value
1 1
2 2
3 3
How can I get the result by select the Table list first and then combine the data in table A and table B?
Thank you!
Just wondering if there is an easy transact statement to copy table 1 to table 2, appending the data in table 2.with SQL2000, thanks.
View 2 Replies View RelatedHi thanks for looking at my question
Using sqlServer management studio 2005
My Tables are something like this:
--Table 1 "Employee"
CREATE TABLE [MyCompany].[Employee](
[EmployeeGID] [int] IDENTITY(1,1) NOT NULL,
[BranchFID] [int] NOT NULL,
[FirstName] [varchar](50) NOT NULL,
[MiddleName] [varchar](50) NOT NULL,
[LastName] [varchar](50) NOT NULL,
CONSTRAINT [PK_Employee] PRIMARY KEY CLUSTERED
(
[EmployeeGID]
)
GO
ALTER TABLE [MyCompany].[Employee]
WITH CHECK ADD CONSTRAINT [FK_Employee_BranchFID]
FOREIGN KEY([BranchFID])
REFERENCES [myCompany].[Branch] ([BranchGID])
GO
ALTER TABLE [MyCompany].[Employee] CHECK CONSTRAINT [FK_Employee_BranchFID]
-- Table 2 "Branch"
CREATE TABLE [Mycompany].[Branch](
[BranchGID] [int] IDENTITY(1,1) NOT NULL,
[BranchName] [varchar](50) NOT NULL,
[City] [varchar](50) NOT NULL,
[ManagerFID] [int] NOT NULL,
CONSTRAINT [PK_Branch] PRIMARY KEY CLUSTERED
(
[BranchGID]
)
GO
ALTER TABLE [MyCompany].[Branch]
WITH CHECK ADD CONSTRAINT [FK_Branch_ManagerFID]
FOREIGN KEY([ManagerFID])
REFERENCES [MyCompany].[Employee] ([EmployeeGID])
GO
ALTER TABLE [MyCompany].[Branch]
CHECK CONSTRAINT [FK_Branch_ManagerFID]
--Foreign IDs = FID
--generated IDs = GID
Then I try a simple single row DELETE
DELETE FROM MyCompany.Employee
WHERE EmployeeGID= 39
Well this might look like a very basic error:
I get this Error after trying to delete something from Table €œEmployee€?
The DELETE statement conflicted with the
REFERENCE constraint "FK_Branch_ManagerFID".
The conflict occurred in database "MyDatabase",
table "myCompany.Branch", column 'ManagerFID'.
Yes what I€™ve been doing is to deactivate the foreign key constraint, in both tables when performing these kinds of operations, same thing if I try to delete a €œBranch€? entry, basically each entry in €œbranch€? and €œEmployee€? is child of each other which makes things more complicated.
My question is, is there a simple way to overcome this obstacle without having to deactivate the foreign key constraints every time or a good way to prevent this from happening in the first place? Is this when I have to use €œON DELETE CASCADE€? or something?
Thanks
In a table-valued UDF, does the UDF use a table variable or a temp table to form the resultset returned?
Banti writes "IF i create temporary table by using #table and ##table then what is the difference. i found no difference.
pls reply.
first:
create table ##temp
(
name varchar(25),
roll int
)
insert into ##temp values('banti',1)
select * from ##temp
second:
create table #temp
(
name varchar(25),
roll int
)
insert into #temp values('banti',1)
select * from #temp
both works fine , then what is the difference
waiting for ur reply
Banti"
I am having a problem in creating query for this exciting scenario.
Table A
ID ItemQtyCreatedDatetime
W001 CB112014-06-03 20:30:48.000
W002 CB112014-06-04 01:30:48.000
Table B
IDItemQtyCreatedDatetime
A001 CB112014-06-03 19:05:48.000
A002 CB112014-06-03 20:05:48.000
A003 CB112014-06-03 21:05:48.000
A004 CB112014-06-04 01:05:48.000
A005 CB112014-06-04 02:05:48.000
I would like to return the nearest date of Table B in my table like for
ID W001 in table B should return ID A002 CreatedDatetime: 2014-06-03 20:05:48.000
ID W002 in table B should return ID A004 CreatedDatetime: 2014-06-04 01:05:48.000
Is there any Posibility to change a User Table to System Table.
How to create one system table.
I am in Big mess that One of the Table I am using is in System Type.
I cant Index the same. Is there any Mistake we can change a user table to system table.....
I have a column defined as smalldatetime. Default length (4), and "allow NULLS" is checked.In the Enterprise Manager UI, when i enter data into that table row, if i just tab past that column, all is well, and the value is represented in the UI as <NULL>.The problem comes once i ever enter a date into that column. Say i have entered a date (all is well), and now i want to remove that entry and go back to NULL (after the date value has been committed, different entry session, say).How is that done?It seems to me, once a date has ever been entered into that column, now, if i try to remove it, i get the error "The value you entered is not consistant with the data type or length of the column, or over grid buffer limit". I have tried deleting the value, entering spaces, entering the string NULL or the string <NULL>; maybe some other tries as well, but none works, i always get that error message and am not allowed to proceed past that cell until i restore a date value to it. I want to get back to <NULL>.Anybody know?Thank you.Tom
View 1 Replies View RelatedI am stuck on finding a solution to transpose source data from a system via a metadata look-up table into a destination table. I need a method to transpose/pivot the source data into columns (which are by various data-types). The datatypes for each column are listed in a metadata table.
Source Data Table:
Table Name: Source
SrcID AGE City Date
01 32 London 01-01-2013
02 35 Lagos 02-01-2013
03 36 NY 03-01-2013
Metadata Table:
Table Name:Metadata
MetaID Column_Name Column_type
11 AGE col_integer
22 City col_character
33 Date col_date
Destination table:
The source data to be loaded into the destination table(as shown below):
Table Name: Destination
SrcID MetaID col_int col_char col_date
01 11 32 - -
01 22 - London -
01 33 - - 01-01-2013
02 11 35 - -
02 22 - Lagos -
02 33 - - 02-01-2013
03 11 36 - -
03 22 - NY -
03 33 - - 03-01-2013
I want Compare two Table data and insert changed field to the third table ...
View 9 Replies View Related