How can a tell if a tak completed succesfully from a stored procedure?
I have a task which is executed from a stored procedure. The sp_runtask only returns whether the task started successfully. How can I tell if it completed successfully?
Thanks
hi, i have a message queue system using sql 2005 service broker.
the code and setup is the same on both dev and live database. but
soon after i restored a live backup to dev. the queue stopped
working on dev, live is ok thou. after some trouble shooting, i
found that the server is not sending the message at all, but it says
"Command(s) completed successfully" without any error messages.
setup:
-----------------------
create message type TestQueryMessage validation = none
create contract TestQueryContract (TestQueryMessage sent by initiator)
create queue TestSenderQueue
create service TestSenderService on queue TestSenderQueue
create queue TestQueueReceiver
create service TestServiceReceiver on queue TestQueueReceiver (TestQueryContract)
send message:
-------------------------
declare @conversationhandle uniqueidentifier;
begin dialog @conversationhandle
from service [TestSenderService]
to service 'TestServiceReceiver'
on contract [TestQueryContract]
with encryption = off;
send on conversation @conversationhandle
message type [TestQueryMessage] ('blah blah blah');
result:
----------------------------------
Command(s) completed successfully.
but when i do "select * from TestQueueReceiver", there's nothing. and i sure nothing else had picked up the messages.
please advise. thanks a lot.
Hi all,
I copied the following code from Microsoft SQL Server 2005 Online (September 2007):
UDF_table.sql:
USE AdventureWorks;
GO
IF OBJECT_ID(N'dbo.ufnGetContactInformation', N'TF') IS NOT NULL
DROP FUNCTION dbo.ufnGetContactInformation;
GO
CREATE FUNCTION dbo.ufnGetContactInformation(@ContactID int)
RETURNS @retContactInformation TABLE
(
-- Columns returned by the function
ContactID int PRIMARY KEY NOT NULL,
FirstName nvarchar(50) NULL,
LastName nvarchar(50) NULL,
JobTitle nvarchar(50) NULL,
ContactType nvarchar(50) NULL
)
AS
-- Returns the first name, last name, job title, and contact type for the specified contact.
BEGIN
DECLARE
@FirstName nvarchar(50),
@LastName nvarchar(50),
@JobTitle nvarchar(50),
@ContactType nvarchar(50);
-- Get common contact information
SELECT
@ContactID = ContactID,
@FirstName = FirstName,
@LastName = LastName
FROM Person.Contact
WHERE ContactID = @ContactID;
SELECT @JobTitle =
CASE
-- Check for employee
WHEN EXISTS(SELECT * FROM HumanResources.Employee e
WHERE e.ContactID = @ContactID)
THEN (SELECT Title
FROM HumanResources.Employee
WHERE ContactID = @ContactID)
-- Check for vendor
WHEN EXISTS(SELECT * FROM Purchasing.VendorContact vc
INNER JOIN Person.ContactType ct
ON vc.ContactTypeID = ct.ContactTypeID
WHERE vc.ContactID = @ContactID)
THEN (SELECT ct.Name
FROM Purchasing.VendorContact vc
INNER JOIN Person.ContactType ct
ON vc.ContactTypeID = ct.ContactTypeID
WHERE vc.ContactID = @ContactID)
-- Check for store
WHEN EXISTS(SELECT * FROM Sales.StoreContact sc
INNER JOIN Person.ContactType ct
ON sc.ContactTypeID = ct.ContactTypeID
WHERE sc.ContactID = @ContactID)
THEN (SELECT ct.Name
FROM Sales.StoreContact sc
INNER JOIN Person.ContactType ct
ON sc.ContactTypeID = ct.ContactTypeID
WHERE ContactID = @ContactID)
ELSE NULL
END;
SET @ContactType =
CASE
-- Check for employee
WHEN EXISTS(SELECT * FROM HumanResources.Employee e
WHERE e.ContactID = @ContactID)
THEN 'Employee'
-- Check for vendor
WHEN EXISTS(SELECT * FROM Purchasing.VendorContact vc
INNER JOIN Person.ContactType ct
ON vc.ContactTypeID = ct.ContactTypeID
WHERE vc.ContactID = @ContactID)
THEN 'Vendor Contact'
-- Check for store
WHEN EXISTS(SELECT * FROM Sales.StoreContact sc
INNER JOIN Person.ContactType ct
ON sc.ContactTypeID = ct.ContactTypeID
WHERE sc.ContactID = @ContactID)
THEN 'Store Contact'
-- Check for individual consumer
WHEN EXISTS(SELECT * FROM Sales.Individual i
WHERE i.ContactID = @ContactID)
THEN 'Consumer'
END;
-- Return the information to the caller
IF @ContactID IS NOT NULL
BEGIN
INSERT @retContactInformation
SELECT @ContactID, @FirstName, @LastName, @JobTitle, @ContactType;
END;
RETURN;
END;
GO
----------------------------------------------------------------------
I executed it in my SQL Server Management Studio Express and I got: Commands completed successfully. I do not know where the result is and how to get the result viewed. Please help and advise.
Thanks in advance,
Scott Chang
Currently, I'm developing an ETL program using Microsoft DTS on SQL Server 2000.
I've completed unit testing & component testing for all inner packages containing various types of executions - SQL task, ActiveX Script task, Error Handler, Transform Data task, Data Driven Query & Dynamic Properties task.
When unit & component tested, all inner package properties-"Limit the maximum number of tasks executed in parallel" is defaulted to 4.
However, the integration testing is failing because I've yet to successfully execute any of the Package tasks in the outer package, which runs & controls all inner packages from the outer package.
The error message encountered was:
---------------------------------------------------------------
| Error source: microsoft dts |
| Error description: execution was cancelled by another user. |
---------------------------------------------------------------
Please explain what might be the cause to this problem when I'm executing the outer package?
Hi guys
Is there anyone who was able to successfully retrieve a full result set? I'm really having troubles getting the result after executing my query. Its really even hard to get sample codes over the net.
Please help guys.
Thanks in advance.
kix
I'm troubleshooting a performance issue , Looking at Profiler - for the given statement, I'm getting the following figures , why would there be such a disparity between the figures. ? How can I go about finding out why there is such difference?
SQL:Stmt Completed:CPU = 31, Reads = 129 , Duration = 32
SQL:Batch Completed: CPU = 2531, Reads = 6087 , Duration = 2593
Jack Vamvas
--------------------
Search IT jobs from multiple sources- http://www.ITjobfeed.com
Returning "completed" when status = 1 and "not completed when status = 0
View 3 Replies View RelatedDoes anyone have a routine that can verify URL's in a database table. I have a table with several thousand website addresses and I would like a way to check and see which ones resolve and which return Page Not Found error. I quess my question is how do you interrogate a URL and what do you look for coming back? Novitiate for many I am sure but not for me.
Thank you.
Hey Folks...
Very new to SQL Server. I've inherited numorous SQL Servers and wanted to know how I can tell if a backup is scheduled and how I can tell if it completed successfully? Thanks in advance....
Mike D.
Hi guys,
View 4 Replies View RelatedHow do i do that... in sch lab, the lecturer said: Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click Try SqlDataSource2.SelectParameters("Title").DefaultValue = txtProductTitle.Text GridView1.DataBind() If GridView1.Rows.Count > 0 Then //if no repeated Label1.Text = "Existing Record Found. Please enter another Software." Else 'SqlDataSource1.Insert() 'Label1.Text = txtProductTitle.Text & " successfully added to the database." End If Catch ex As Exception Label1.ForeColor = Drawing.Color.Red Label1.Text = "An error occured!" & ControlChars.NewLine & ControlChars.NewLine & _ ex.Message.ToString() End Try End Sub but its not working for me... the GridView1.Rows.Count is always 0, if there is a repeat, it should be > 0
View 4 Replies View RelatedOK, so I'm working on a project that requires the dynamic generation of SQL statements. Now in Visual Studio .NET I'm sure many of you have used that wonderful visual database tool that allows you to magically "verify sql syntax" at the click of a button. It takes a query that looks like this:
"SELECT A.AFFID, A.UserName, A.Pass, A.FirstName, A.LastName, A.Company, A.Street, A.City, A.State, A.ZIP, A.Country, A.phone, P.EMail, A.RecieveEMail, A.SSN, A.JoinDate, A.AffType, P.ProductId, P.BuyerId FROM Affiliates A, Purchases P WHERE (ProductId > 0) ORDER BY 1"
and transforms it into something that looks like this:
"SELECT A.AFFID, A.UserName, A.Pass, A.FirstName, A.LastName, A.Company, A.Street, A.City, A.State, A.ZIP, A.Country, A.phone, P.Email, A.RecieveEMail, A.SSN, A.JoinDate, A.AffType, P.ProductID, P.BuyerID
FROM Affiliates A CROSS JOIN Purchases P
WHERE (P.ProductID > 0)
ORDER BY A.AFFID"
My question is: is there anything in the .NET platform that would allow me to achieve the same kind of result programatically (i.e. transform standard sql to tsql syntax and verify the syntax of the query at run time)?
Any help would be appreciated! Cheers.
To: All,
Hi, well thanks for reading this thread. Anyway I got a problem where i can't accurately verify whether a user had successfully login to my application.
I got a database to store the user name and password. So whenever a user login, i would use a while loop to read all the user name and password, and an if statement to verify whether the user's name and password matches to the ones stored in the database. This method doesn't work when there are multiple records in my database, because the if statement would compare the user given name and password with all the user name and password in the database. Hence resulting a mismatch.
Well I really hope that you understand what my problem is, really need help with this problem as I'm really clueless. Can somebody please help me, please teach me how to rectify this problem?
Well i think the core problem would be to compare the user name and password with the records in the database one at a time, and once it is found, stop comparing and allow user to enter site.
Yup I think that's all, sorry for the lengthy thread. Anyway thanks a million and have a nice day.
From: iaciz
How do I tell what SQL licensing option (processor, device CALS or user CALS) was taken when the server was installed? I have taken over a SQL 2005 server and I would like to check how many CALS (if any) it is licensed for.
View 2 Replies View RelatedI am trying to use msde for the startup kits. but i cannot connect to it. How can I do a simple test to verify it is installed and that I can log into the db?
Thanks
Ron
Is there a way that SQL can automatically look at each users'connection and make sure it is still connected through the third partyapplication? The problem is that when a connection to this applicationis not terminated properly, the SQL server is not notified of thedisconnect and the user cannot log back into the application until allthe processes are completed and the original session terminated.Thank you.
View 1 Replies View RelatedHello All,
I'm trying to develop a stored procedure that would do one of TWO things:
1. Return a 'status' that a value does not exist, if I were to provide the parameter via an ASP.NET2.0 page
2. If it does exists, to return the row data associated with that value (id number)
The stored procedure would search a SQL Server table within it self first. It that fails it would look at an Oracle table (work order table). And if that fails to return a 'row' to look through another Oracle table (work request table). If that doesn't occur, then it would throw the result as described in #2.
If the result exists in one of the TWO Oracle tables it would then insert that row into the first SQL Server table that the stored procedure searched through AND would return the row set to the ASP.NET page.
While all this is happening, I was hoping to get some insight as to how to create a "Please Wait..." feedback and then moving to the final result.
Looking forward to the wise words of the many on this forum, as I have experienced in the past! :)
Hi folks!
The boss has decided that the data from a table we have on one database (containing daily data) needs to be copied to a "history" table on a different database, on a different server.
The transfer will probably be done with a scheduled stored procedure, and all columns will be transferred EXCEPT for two columns in the source table, which are not present in the destination table. This means instead of an "INSERT Dest SELECT * FROM Source" I have to do an "INSERT Dest SELECT yada,yada,yada... FROM Source" in order to disregard the columns we don't care about. NO problem.
I was thinking (you should smell trouble - and sawdust burning at this point) that this leaves us open to a punch below the belt later when a new column is added to the Source table, since we are using a definitive list of columns to move rather than a *, and the new column could be added without the otherwise system-generated, *-sponsored "gentle reminder" that it also needs to be added to the Dest table. I'm not as convinced as The Boss that "Oh, I'm sure we'll remember to add it to the history table when that happens" :lol:
So, long story shorter (nah...too late for that) - I figure I can write a check at each day's historical transfer on the count of columns in one table verses the other, and send an email or fail the job if the count doesn't make sense.
For example, if the Source table has 34 columns, since we don't care about two of them, the Dest table should have 32 columns, if things are still in synch. OK, I think (insert burning sawdust smell here), I can use a SysObjects thang to count rows. BOL points out INFORMATION_SCHEMA.COLUMNS as a possibility.
Here is the code I think (sawdust) can be used:select ((select count(*) from SourceDb.INFORMATION_SCHEMA.columns
where table_name = 'Source') - (select count(*) from HISTSERVER.DestDb.INFORMATION_SCHEMA.columns
where table_name = 'Dest')) as ColumnDiff
Trouble is...this fails because apparently the INFORMATION_SCHEMA thang doesn't do well with remote servers.
Can anyone figure a way around this, or suggest an alternative? I'm still looking, but thought I'd also toss it out onto the board for your generous consideration.
Thanks - and can you BELIEVE the year is already 1/12th of the way OVER?!?!?!
Paul
Let me explain in simplified terms. We have an ETL process:
1) download data from the iSeries table Cust into SQL table Cust.
2) Tran_Cust is a view created FROM Cust
3) Copy from view Tran_Cust to table ods_Cust
4) v_ods_Cust is a view created from ods_Cust
I want to look for inconsistencies in the column definitions as a column moves from iSeries Cust, SQL Cust, view Tran_Cust, ods_Cust, view v_ods_Cust. The columns generally keep the same names except for v_ods_cust. Here a column like CustName will be created with a more meaningful column name - "CustName as 'Customer Name'.
We have hundreds of tables and we have column definition inconsistences where the host changed their column defintion and we made no changes on the SQL side. Or someone made a SQL column change in one table, but not both tables and the views were not dropped and recreated.
I have the list of tables. Think that I can put together some tsql to loop through the list of tables and create a new table based on the iSeries definition, then compare columns defintion across all the tables and views - except for the v_ods. THis is where columns are given new names - such as "CustName as 'Customer Name'". Need the actual view definition to find that CustName is 'Customer Name' and then compare the definition of ods_Cust.CustName to v_ods_Cust.[Customer Name]
How can I find the view definiton of say v_ods_Cust, seperate out the source column names (CustName) and destination column names (Customer Name) so that I can compare the source column names to another table and fine the differences?
hi, all.I want to verify data merged from access in sqlserver.but it has toomany records .so i need a tooldo this.someone maybe has it.thanks
View 1 Replies View RelatedI've seen a few posts in the MSDN documentation (see links below) stating that the MergeSynchronizationAgent no longer requires the STA threading model in SQL Server 2005 SP1. However, I'm still receiving the following exception message in my synchronization code (where it attempts to access the SynchronizationAgent property):
The MergeSynchronizationAgent class must be instantiated on a Single-Threaded Apartment (STA) thread.
I have Service Pack 1 for SQL Server 2005 installed on both my server as well as my local client (the client is running SQL Server 2005 Express). How can I verify the correct files are there (e.g. are the some specific date/time values for the RMO/COM objects?
Here's the list of MSDN links mentioned above:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=326837&SiteID=1
http://msdn2.microsoft.com/en-us/library/ms146869.aspx
http://msdn2.microsoft.com/en-us/library/microsoft.sqlserver.replication.mergesynchronizationagent.aspx
http://msdn2.microsoft.com/en-us/library/microsoft.sqlserver.replication.mergepullsubscription.synchronizationagent.aspx
Hi,
we've got this problem with some particular jobs: they look as they
ran correctly, but actually they didn't made it all through their
duties.
The problem is that this job is calling a sequence of DTS, where there
is a DTS with an ActiveX control which modifies another DTS before
launching and some other tasks: the error happens there, .
Launched from the DTS we get the error, from the job no...any idea how
we could get the correct job information?
Thank you
Daniele
I have a scheduled job to run daily at 4 am. the job imports data from client side from text
files and puts data in our sql table.It takes around 1 hour.
the problem is it doesnt stops after the import process completes.so after one hour
i can see the data is imported into my sql table so thats fine but the job keeps running.
I tried observing that job's spid in activity monitor in sql 2005 but after one hour i cant even see
that spid but still job runs. its weird.and after that when i stop the job manually then it stops
saying job completed succcessfully.
that step is a last step and it uses windows cmd.my understanding is the job step doesnt
understands that it got finished. what should i do in here?? any ideas r appreciated
we are running the same job for another servers and its fine.
2007-03-22 09:36:52.39 server Microsoft SQL Server 2000 - 8.00.194 (Intel X86)
Aug 6 2000 00:57:48
Copyright (c) 1988-2000 Microsoft Corporation
Standard Edition on Windows NT 5.0 (Build 2195: )
2007-03-22 09:36:52.45 server Copyright (C) 1988-2000 Microsoft Corporation.
2007-03-22 09:36:52.45 server All rights reserved.
2007-03-22 09:36:52.45 server Server Process ID is 1516.
2007-03-22 09:36:52.45 server Logging SQL Server messages in file 'd:Program FilesMicrosoft SQL ServerMSSQLlogERRORLOG'.
2007-03-22 09:36:52.57 server SQL Server is starting at priority class 'normal'(1 CPU detected).
2007-03-22 09:36:53.26 server SQL Server configured for thread mode processing.
2007-03-22 09:36:53.48 server Using dynamic lock allocation. [2500] Lock Blocks, [5000] Lock Owner Blocks.
2007-03-22 09:36:54.31 server Attempting to initialize Distributed Transaction Coordinator.
2007-03-22 09:36:56.46 spid3 Warning ******************
2007-03-22 09:36:56.46 spid3 SQL Server started in single user mode. Updates allowed to system catalogs.
2007-03-22 09:36:56.60 spid3 Starting up database 'master'.
2007-03-22 09:36:57.26 spid3 Server name is 'PRECISE'.
2007-03-22 09:36:57.26 server Using 'SSNETLIB.DLL' version '8.0.194'.
2007-03-22 09:36:57.26 spid5 Starting up database 'model'.
2007-03-22 09:36:57.60 spid5 Clearing tempdb database.
2007-03-22 09:36:57.74 spid7 Starting up database 'msdb'.
2007-03-22 09:36:57.85 server SuperSocket Info: Bind failed on TCP port 1433.
2007-03-22 09:36:57.89 server SuperSocket Info: Bind failed on TCP port 1433.
2007-03-22 09:36:57.89 server SuperSocket Info: Bind failed on TCP port 1433.
2007-03-22 09:36:57.89 server SuperSocket Info: Bind failed on TCP port 1433.
2007-03-22 09:36:58.31 server SQL server listening on TCP, Shared Memory, Named Pipes.
2007-03-22 09:36:58.31 server SQL server listening on 195.195.195.2:1433, 127.0.0.1:1433.
2007-03-22 09:36:58.31 server SQL Server is ready for client connections
2007-03-22 09:36:58.35 spid7 Starting up database 'pubs'.
2007-03-22 09:36:58.64 spid7 Starting up database 'Northwind'.
2007-03-22 09:37:00.18 spid5 Starting up database 'tempdb'.
2007-03-22 09:37:00.32 spid3 Recovery complete.
2007-03-22 09:37:00.32 spid3 Warning: override, autoexec procedures skipped.
2007-03-22 09:37:07.95 spid3 SQL Server is terminating due to 'stop' request from Service Control Manager.
Why do I get the message "Operation can't be completed?" when I try to save a stored procedure!!! When I create a new stored procedure and copy the code into it it works fine!
View 2 Replies View Related
Is there a way to tell if a report actually got sent? I have a report with an email subscription. As a test, I changed the data source credentials to something invalid. Then I ran the subscription using this:
exec ReportServer.dbo.AddEvent @EventType='TimedSubscription', @EventData='13baba1e-dce0-4d99-a9f5-9c3da02a0615'
The system gave me no indication that the report failed and was never sent by email. Is there a way to tell if a report worked or not?
Is there a way to run a stored procedure at the end of a report with a success or failure flag?
Thanks,
Stu
Log shows (on SS2005)
€œA self-generated certificate was successfully loaded for encryption€?
No encryption is used. Properties of Protocol for MSSQLSERVER shows no for Force Encryption, certificates are empty
How, why, where from and what for does it get and load self-generated certificate?
I have a program that is automatically ran through a job. The program gets the most recent files that have been uploaded to a server. I would like to be able to query the database to see when the last time this job was ran successfully and set this date as the date to look for files newer than the last successful run date.
Could someone point me in the right direction to what tables this data is stored in on a 2005 SQL Server Database?
I have this data in a flat file and I'm doing a data dump to a SQL table. I created a SSIS package which ran successfully but only exporting 2 rows out of 4 rows to the SQL table. For some reason my package ignore two other rows where "col4", "col5" and "col6" do not have any data. No conditional component was used in this package to not to load those records.
col1 col2 col3 col4 col4 col5 col6
849833 02/15/06 841 VS 791 49 7
849819 02/15/06 212 NA
949070 02/15/06 230 ABS
700010 02/15/06 820 VS 690 46 6
Any idea? Thanks.
I'm in the process of installing Hotfix kb934458 (9.0.3054) on a Windows 2003 R2 SP2 Server. This is for SQL 2005 on a Active/Passive cluster with 2 instances. I'm only getting this error on the Database Engine and Analysis Services. It was successful for Integration Services, Reporting Services and Notification Services. I've tried taking the 2 instances offline as well as tried installing from the Active then again on the Passive nodes. No luck... Any suggestions? Does this work for R2 release of Windows 2003 SP2? This is the log:
Time: 02/29/2008 14:02:38.088
KB Number: KB934458
Machine:
OS Version: Microsoft Windows Server 2003 family, Enterprise Edition Service Pack 2 (Build 3790)
Package Language: 1033 (ENU)
Package Platform: x64
Package SP Level: 2
Package Version: 3054
Command-line parameters specified:
Cluster Installation: Yes
Log Location on Passive Nodes:
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfix
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfix
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfix
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfix
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfix
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfix
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfix
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfix
**********************************************************************************
Prerequisites Check & Status
SQLSupport: Passed
**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
SQL Server Database Services 2005 (BIZTALK) ENU SP2 2005.090.3050.00 x64 ENTERPRISE
SQL Server Analysis Services 2005 (BIZTALK) ENU SP2 2005.090.3050.00 x64 ENTERPRISE
SQL Server Reporting Services 2005 (BIZTALK) ENU SP2 9.00.3054.00 x64 ENTERPRISE
SQL Server Database Services 2005 (SHAREPOINT) ENU SP2 2005.090.3050.00 x64 ENTERPRISE
SQL Server Analysis Services 2005 (SHAREPOINT) ENU SP2 2005.090.3050.00 x64 ENTERPRISE
SQL Server Reporting Services 2005 (SHAREPOINT) ENU SP2 9.00.3054.00 x64 ENTERPRISE
SQL Server Notification Services 2005 ENU SP2 9.00.3054.00 x64 ENTERPRISE
SQL Server Integration Services 2005 ENU SP2 9.00.3054.00 x64 ENTERPRISE
SQL Server Tools and Workstation Components 2005 ENU SP2 9.2.3054 x64 ENTERPRISE
**********************************************************************************
Products Disqualified & Reason
Product Reason
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
MSSQL$BIZTALK SQL Server Database Services Service 4756
MSSQL$SHAREPOINT SQL Server Database Services Service 4636
MSOLAP$BIZTALK Analysis Services Service 7976
MSOLAP$SHAREPOINT Analysis Services Service 7148
**********************************************************************************
Product Installation Status
Product : SQL Server Database Services 2005 (BIZTALK)
Product Version (Previous): 3050
Product Version (Final) :
Status : Failure
Log File :
Error Number : 11009
Error Description : No passive nodes were successfully patched
----------------------------------------------------------------------------------
Product : SQL Server Analysis Services 2005 (BIZTALK)
Product Version (Previous): 3050
Product Version (Final) :
Status : Failure
Log File :
Error Number : 11009
Error Description : No passive nodes were successfully patched
----------------------------------------------------------------------------------
Product : SQL Server Reporting Services 2005 (BIZTALK)
Product Version (Previous): 3054
Product Version (Final) :
Status : Not Selected
Log File :
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : SQL Server Database Services 2005 (SHAREPOINT)
Product Version (Previous): 3050
Product Version (Final) :
Status : Failure
Log File :
Error Number : 11009
Error Description : No passive nodes were successfully patched
----------------------------------------------------------------------------------
Product : SQL Server Analysis Services 2005 (SHAREPOINT)
Product Version (Previous): 3050
Product Version (Final) :
Status : Failure
Log File :
Error Number : 11009
Error Description : No passive nodes were successfully patched
----------------------------------------------------------------------------------
Product : SQL Server Reporting Services 2005 (SHAREPOINT)
Product Version (Previous): 3054
Product Version (Final) :
Status : Not Selected
Log File :
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : SQL Server Notification Services 2005
Product Version (Previous): 3054
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : SQL Server Integration Services 2005
Product Version (Previous): 3054
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : SQL Server Tools and Workstation Components 2005
Product Version (Previous): 3054
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
**********************************************************************************
Summary
No passive nodes were successfully patched
Exit Code Returned: 11009
I have had a serious issue with a production AlwaysOn cluster whereby the service did not successfully transition to the secondary node and I cannot find the root cause of the issue.
Some details: It is a 2 node cluster (same datacenter) with a shared disk quorum, Windows Server 2012, both are virtual machines running on VMWare vSphere  5.5. SQL Server version is 2012 Enterprise SP2 CU6
The failover occurred because of a network incident (a spanning tree recalculation caused a connection timeout between both nodes). Initial entries in the SQL Log look normal for this event, for example:
05/08/2015 11:18:06:Â A connection timeout has occurred on a previously established connection to availability replica 'FIN-IE-PA078' with id [6910F4A9-87E7-4836-BA79-0F41BE90266D]. Â Either a networking or a firewall issue exists or the availability replica has transitioned to the resolving role.
05/08/2015 11:18:06:Â AlwaysOn Availability Groups connection with secondary database terminated for primary database 'UserManagement' on the availability replica with Replica ID: {6910f4a9-87e7-4836-ba79-0f41be90266d}. This is an informational message only. No user action is required.
[code]....
My interpretation of this is that the cluster failover attempts failed, because the network condition still persisted. The network interruption lasted approximately 2 minutes, and I would have expected the cluster to come back online at this point, after the restart delay period as suggested in the last entry in the error log. However this did not happen.
hello friends,
i am runing stored procedure which runs for around 20 min. as it is filtering data from lacks of record. after completion it shows above message i.e."query completed with errors" with 466814 records affected why this happining as it does not display any errror in message window . Does it is because of size of data . plz guide me how to debug it.
sp is containing 3 cursors
Thanx in advance
I have a page that runs a transaction correctly after a button click.
I want to allow someone to click a button that rolls back the transaction, after the transaction runs on the first button click.
I can also successfully roll back within the first button click.
I'm getting a NullReference error when trying to access SqlTransaction.Rollback() outside the button click.
If SqlTransaction.Commit() completes without error can SqlTransaction.Rollback() be called after?
I tried making 'trans' a more global variable and it still gave me the error.
Button Click 1:
Dim trans As SqlTransaction
trans = connection.BeginTransaction()
try
'run SQL Statement
trans.Commit()
Catch e As Exception
trans.Rollback()
throw e
end try
Button Click 2:
trans.Rollback()