Veritas And Backing Up SQL Database
Nov 8, 2007
Hello,
I really hope someone can help...
I am having great difficulty backing up my SQL database through Veritas/symantec backup exec here is the error being reported in log:
Backup- servername V-79-57344-33938 -
An error occurred on a query to database "databasename".
my sql database is setup for both windows and sql authentication...
What settings does a database need for Backup exec to be able to query it?
any help much appreciated
View 12 Replies
ADVERTISEMENT
Mar 8, 2005
Anyone have experience using Veritas to backup SQL Server databases?
I just started with a client who's SQL Server froze with the CPU pegged at 99% on my first day. I think it might be related to using Veritas SQL Server component to run hot backups of the database, while the SQL Server Agent was running simultaneous independent backups. All this on a live database of course, while a user was completing a large transaction.
I advised them to disable the Veritas SQL Server backup component and let SQL Server back up its own databases. Then use Veritas just to archive SQL Server's backup files.
I think I saw a similiar issue at a previous client site that was using Veritas. Please let me know if you have prior experience in this area, and your evaluation of the quality of Veritas database backup component.
Thanks!
View 9 Replies
View Related
Jan 8, 2007
Michael writes "We are running SQL and Veritas to backup the databases. Supposedly the SQL agent in Veritas, after a full backup, truncates the log files but for some reason this isn't happening... any ideas?"
View 4 Replies
View Related
May 24, 2006
We are running SQL 2000 sp4, only one user database (SAP) the database is 63 GB.
The ldf files were trashed so I went to tape to restore.
We are using veritas backup exec 9.1 sp4. Veritas is on the same server. I can restore the master db and the msdb fine. However when we attempt to restore the DEV db it runs for 2 hours and then fails with a communication error from veritas.
When we restore the master the DEV db comes up suspect as there are no files for it to attach to) so we cannot attach to it to restore, so I have deleted it and attempted to restore - same communication error. I have recreated a db named DEV with the mdf etc created to the size needed plus some to be sure, no good same behavior (behavior described below).
The job starts and it creates all the folders for the database (there are 1 MDF, 5 NDF, and 4 LDF files each in its own folder). Then it begins to create teh individual files it gets ~half way through at about an hour-hour and fifteen. During this time there are a large number of writes being performed by SQL (I assume it is creating the structures). Then it switches over to reading from tape a large number of read by beengine for another 45-1.5 hours then the job fails with the error unable to communicate with the device. I ahve noticed that once it starts reading from tape the db is gone from enterprise manager, and the mdf etc. files that were being created are now gone.
Help this has gone on for three days!!!
View 11 Replies
View Related
Oct 24, 2001
Is it safe to backup while the database is running 1000 transaction/sec.? If yes - why should I buy Veritas Backup Exec Server Edition and Veritas Backup Exec Online Backup Pack ?
Michael
View 2 Replies
View Related
Mar 3, 2000
When backing up a database in MS SQL 7.0, there is a window that appears in the destination section of the backup window. In this window is where the filename appears that the backup will proceed to and to the right of this window are "add", "remove" and "contents" buttons.
If there are multiple names in this window, will the entire backup go to both files or does it split the backup between the two filenames.
View 1 Replies
View Related
May 6, 2004
Here is the situation, I have a web application (asp.net/vb.net) with ms sql 2000 as the database. I have two database server. I would like to backup database 1 with database 2. I would like to do it at intervals and through code. If anyone can give me some ideas on how to do this or any research material, please do.
Thanks
View 2 Replies
View Related
Feb 20, 2007
Sorry this is so trivial, but I don't work with SQL Server too much. I just want to back up a table in one of my databases. I'm using SQL Server 2005, the management studio. Can someone walk me through how to back up a table? Thanks!
View 1 Replies
View Related
Apr 24, 2005
Hi. im shortly going to have to submit my project for uni which ive created using sql server. How can i copy everything that ive made so i can submit everything and it can be replicated if necessary. Do i use the backup database task in enterprise manager or do i have to do that and export data or..?
ive used tables and stored procedures and a diagram btw.
thanks for any advice
View 1 Replies
View Related
Oct 19, 2000
Hi, I am in a production database server. Data has been added and deleted via the web. So there is alot of traffice in and out of the database. How can I make a backup plan to make sure I am not lossing any input or deleted data . I am familiar with backing up a database in regular intervals, but I amnot sure if this is the best way in this senario.
How can I take advantage of the transaction log in restoring the database.
Thanks
Ahmed
View 2 Replies
View Related
Feb 18, 2007
Hi,
I have been using the backup feature of SQL Express for some time and I thought it would be good to test a restore in case the worst happend. I moved my bak files to a usb memory stick and copied them to a machine and installed SQL Express so its empty no database's etc. So I right click the databae folder and choose restore from device and point to the db's but I get errors restoring them. What am I doing wrong? Is their any guides that give steps to backup and restore database's ? Any help would be great - I can of course provide more information need be.
Thanks,
Adam.
View 2 Replies
View Related
Nov 1, 2004
My client is changing hosting providers. We are trying to download a full backup of our MS SQL 2000 database from the old host. We can get all of the data using the Data transfer wizard in Enterprise manager. We can get all data and structure using the Data Transfer wizard with other options. However, when we do this, all of our tables get renamed with a prefix that is our username from the old host.
So, if we have a table named customers and our MSSQL login on the old host is userA, then our table gets renamed to tableA.customers.
This won't work with our applications and stored procedures. Changing tens of thousands of lines of code is not acceptable.
Does anyone know a way we can get a full copy of the database (rules, data, structure, keys, identies, etc) without having the username prefix?
Thanks for the help!
-DAGTA
View 1 Replies
View Related
Sep 13, 2000
Is there a way by which we can execute the backing up of database from the command prompt......
Suppose i need to do the below task. I can write a stored procedure and schedule it. But the situation demands to run from the command prompt. Is there a way out.
-- Create the backup device for the full MyNwind backup.
USE master
EXEC sp_addumpdevice 'disk', 'MyNwind_2', 'c:mssql7ackupMyNwind_2.dat'
-- Back up the full MyNwind database.
BACKUP DATABASE MyNwind TO MyNwind_2
-Rajesh
View 2 Replies
View Related
Feb 19, 2008
Hi,
I developed an application in Vb.net and SQLDMO that backs up a database and performs certain operations on it once this is done. I have set the backup to backup to file which the user selects. However when i execute the backup i get an error message that " Backup device not found or error finding device" .THis error baffles me because i have not specified the backup to be to device can anyone help?
View 14 Replies
View Related
Mar 5, 2008
How can i take backup of a database using sql query analyzer?
plz help....
Rahul Arora
07 Batch
NCCE Israna,
######################
IMPOSSIBLE = I+M+POSSIBLE
View 1 Replies
View Related
Nov 2, 2006
Hello,
I found some code below that works fine when I run it in my vb.net code in Design mode. When I publish the application, run the app and then execute the sub MyDbBackup() I get the following error: Cannot open backup device 'C:dbBackup'. Operating system error 5(Access is denied). BACKUP DATABASE is terminating abnormally.
Here is the code that runs:
Public Sub MyDbBackup()
Dim sqlconn As New SqlClient.SqlConnection(MyConnectionStringdb)
sqlconn.Open()
Dim Backupcommand As SqlClient.SqlCommand = New SqlClient.SqlCommand("BACKUP DATABASE [" & sqlconn.Database.ToString & "] TO DISK = 'c:myDataBaseBackup.bak'")
Backupcommand.CommandType = CommandType.Text
Backupcommand.Connection = sqlconn
Backupcommand.ExecuteNonQuery()
sqlconn.Close()
End Sub
2 Questions: Why does it backup fine in design mode, but not after it is published? Also, in design mode, my database is called TAP_Master.mdf but when I look under C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData, I do not see that database name... all I see is master.mdf, model, msdbdata etc... Is that database stored anywhere else?
I have set the MyConnectionStringdb variable to = "Data Source =.SQLEXPRESS;AttachDbFilename=|DataDirectory|TAP_Master.mdf;Integrated Security=True;User Instance=True"
Thanks in advance.
View 10 Replies
View Related
Mar 30, 2004
Hi
I am getting an error while backing up a particular database named "asset" . The error says ........
Server: Msg 3132, Level 16, State 1, Line 4
The media set for database 'Asset' has 2 family members but only 1 are provided. All members must be provided.
Server: Msg 3013, Level 16, State 1, Line 4
BACKUP DATABASE is terminating abnormally.
I have created two backup devices for this database ("asset") through enterprise manager.
AssetDMP
AssetLogDMP
I have total 9 databases out of which only this database throws error. All other database backups going fine.
Here is the query that I am using to backup the database and Log.
USE master
GO
IF EXISTS (SELECT * FROM sysdatabases WHERE name = 'Asset')
BACKUP DATABASE Asset TO AssetDMP WITH NOUNLOAD, STATS=10, INIT, SKIP
GO
IF EXISTS (SELECT * FROM sysdatabases WHERE name = 'Asset')
BACKUP LOG Asset TO AssetLogDMP WITH NOUNLOAD, STATS=10, INIT, SKIP
Please Help
Thank You / Ssg
View 8 Replies
View Related
Jun 9, 2006
Dear sir/madam,
I am from NTU, Singapore and we have a windows 2003 server edition installed on a DELL server and it also runs MS SQL server 2000 for a project of ours. We have installed a HP tape drive on the dell server and it works fine if ntbackup is used at the command prompt but then the SQL enterprise manager does not recognize the tape drive and backing up of our database is of high priority as it contains sensitive information. But the tape drive is installed properly as the device manager does not show any error and ntbackup also recognizes it. I cant seem to figure out why SQL server 2000 cannot recognize it. It would be very helpful if you could kindly guide me on this issue.
Thanking you
Regards
Lavanya Janardhanan
View 1 Replies
View Related
May 25, 2006
Hi There,
I want to know how to backup and restore database from VB.net. ie I am trying to put two buttons on my form, Backup and Restore. When I click on Backup a Backup of the SQL Database with extension of *.bak is created. Similarly when I click on restore and select a database with *.bak extension it should restore that database. I saw a software where it created a backup of Sql database with extension of .zip containing the bak file which is password protected. when u restore the database it automatically gets unzipped and the database is restored. Can anyone help me.
Thanks in advance.
Regards,
Amit
View 1 Replies
View Related
Mar 1, 2006
Anyone know of a good "free" way to back up web files and SQL Server 2005 Express Database?
I was able to use Windows Server 2003 Backup utility to back up the folder where the Databases were stored, as well as the web files, with no errors.
But I have heard a lot of discussion that you can't just simply backup SQL Server data files?
I'm wondering how sound the backup I've created is...
Any suggestions?
View 1 Replies
View Related
Oct 29, 2015
I am trying to backup and restore a 20GB SQL database from a SQL Server 2012 to another SQL Server 2014, but I have come across the following issues:
1) The developers [against best practice] have stored multiple images in fields within the database as binary code.
This therefore exceeds the 65532 character limit in some fields, so even though the images do show [based upon the data saved within this field], I cannot find the data in the field beyond this 65532 limit, within SQL Server.
How can I export / locate this data after the 65532 character limit?
2) When I have attempted to restore the database I am getting this error message:
Restore of database 'zapkam' failed. (Microsoft.SqlServer.Management.RelationalEngineTa sks)
Additional information:
System.Data.SqlClient.SqlError: RESTORE detected an error on page (1:1592996) in database "zapkam" as read from the backup set. (Microsoft.SqlServer.SmoExtended)
I have managed to restore two other smaller databases using the same technique, but am wondering if it's an issue with the database itself.
3) I have uploaded this database to the new server using FileZilla FTP Client, but it has cut out, painfully at 80% + 90% on a couple of occasions.
Is there a better solution for uploading these big files that I could possibly use? For example, uploading table by table or similar...
View 3 Replies
View Related
Jul 23, 2005
I have an online SQL Server database provided by an ISP. I do not havepermission to create a backup device and I understand this is normalpractice.I am not using Enterprise Manager to administer the online database.I know I can back up the structure of the database using SQLscripts.My question is:How do I back up on my own machine the data contained in the onlinedatabase tables I have created? If I were using Enterprise Manager Icould do it by downloading tables using the DTS facility but how can Ido it without Enterprise Manager?Is there some work around which I have missed eg creating a csv fileof the data?Best wishes for 2005 to all those helpful people in this newsgroup!John Morgan
View 1 Replies
View Related
Jul 23, 2005
I am having a problem backing up my database and TLog files due to alack of local diskspace. The db file is about 30GB and the TLog isabout 20GB each on a different hard disk. Each disk doesn't haveenough available space to accomadate a backup. I also can't shrink thefiles because part of that procedure would require a backup.Question: Can I use a redirected drive for the backup media? Is therea way to trick SQL into allowing this? If the answer is no, doesanyone have a suggestion as to want I should do? I am in the processof requesting more disk space,but that could take a while.Thanks,
View 3 Replies
View Related
Mar 30, 2001
Hello,
We use Veritas BE with SQL agent to backup all the company's databases. Has anyone used Veritas for SQL backups and restores, adn what are the pros/cons verses some scripting.
I've been in a few recovery situations with veritas although limited it's easy for a network analyst to restore, but I prefer scripts to restore. Our SQL shop is young and still in alot of it's development phase. I'd like to break the trend we have now and write some decent batch/sql scipts for backups?
Right now veritas backs up all our NT boxes, hence why we use it for SQL. I have scripts, but haven't implimented. Should we switch to scripts or stay with Veritas?
thanks,
AJ
View 3 Replies
View Related
Apr 25, 2001
Hi ,
I greatly appreciate if anybody can tell me where can i get information regarding SQL Server 7.0 using Veritas media management tool for backup and restore.
thanks in advance
Mohan
View 1 Replies
View Related
Jul 19, 2000
Has anyone had any problems with the Veritas Netbackup for Microsoft SQL Server?
Suggestions?
Thanks,
Kavitha
View 7 Replies
View Related
Sep 14, 2000
Can anyone help. This is the only failure that is occuring in the backup.
Can anyone shed any light
Thanks
An error occurred on a query to filegroup master..PRIMARY.
^ ^ ^ ^ ^
SQL Server returned the following error message:
You can only perform a full backup of the master database. Use BACKUP DATABASE to back up the entire master database.
^ ^ ^ ^ ^
Unable to open the item master?PRIMARY - skipped.
View 2 Replies
View Related
Aug 29, 2000
I have Veritas Backup Exec. The software does a good job with the backup. However a few of my SQL 7 Databases the files are skipped even though I have told the software to lock the file. Specificaly this happens on my EPICOR Accounting Databases. Is there a command I can issue to stop the SQL server from running prior to the backup and then re-start after the backup has completed. Any help would be appreciated. Thanks
View 1 Replies
View Related
Jun 8, 2008
HI All,
Bit confuse and please help to setup correct way of backup.
I got SQL Server 2000 and Veritas Backupexec 10.0
So what is your recommended way to backup SQL Servers.
1. Veritas Backup agent with Differtial (Mon-Thu) and full backup on Friday?
Set SQL recovery Model to FULL and only backup Transaction (.TRN) logs to server disk , No backup (.bak) from MP ?
or
2. Create SQL MP and backup to SQL Server DB & Logs to disk every night- full backup
Keep only 1 day worth of backup. ( not enough space)
Use veritas to backup .bak file only not using that veritas SQL Backup?
Or knowledge me with the proper method?
View 17 Replies
View Related
Jul 23, 2005
Could someone please explain the pros/cons of installing the VeritasSQL agent versus backing up the .bak file generated by SQL Server? Ihave worked with both setups in the past, but never really understoodwhat made one better than another.TIA,Brad
View 2 Replies
View Related
Mar 8, 2008
hi ,
pls define a veritas backup,tel be briefly pls help
View 4 Replies
View Related
Nov 24, 2004
Can anyone tell me how to RESTORE a Table, not an entire Database, to the live server.
Please Help
View 3 Replies
View Related
Jan 28, 2004
Hi,
The last five days, the SQL Server Production backups to tape have been incredibly slow. Actually, they don't complete because they have been going on for 60 hours. Everything on the servers (clustered production environment) seems fine. Nothing untoward unusual. Any ideas what could be causing it? We're thinking of rebooting tonight.
Any help would be appreciated.
Maria
View 13 Replies
View Related
