I want to use SQL 2005 to import data from Visual Foxpro 6.0 free table / database into SQL 2005. Whethter I should install the latest Microsoft OLE DB Provider for Visual FoxPro 9.0 SP1 or previous mdac ???
Please advice and many thanks.
Hi all,
I got an error when i do an OLE db Source pointing to an sql 2000 database and executing a sql query inside the OLE Source. The ole source will point to an OLE DB destination which is an sql 2005 database.
But i got the below error:
Error at Data Flow Task [OLE DB Destination [245]]: the column firstname cannot be processed because more than one code page (936 and 1252) are specified for it.
Error at Data Flow Task [DTS.Pipeline]: "component "OLE DB destination" (245)" failed validation and returned validation status "VS_ISBROKEN".
Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at Data Flow TaSK: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)
Is there any way to restore a database of higher version to lower version.
E.g. I have created a database in sql server 2012, created some tables & procedures in that.I took Full backup of that database. Can I restore it to sql 2008r2 or any lower version.
I know direct restore is not possible, I have to use either import or export option or generating script,but i want to know is there any easy step to do so.
Vimal Lohani
SQL DBA | MCP (70-461,70-462)
Hi all,
Since some analysis services features are only available in Enterprise version , I have to upgrade my SQL 2005 server from standard edition to enterpise edition.
So I uninstall originial standard version of analysis service and install a Enterprise version. However, the analysis service is still a standard version after installation.
Is it possible to keep data engine as standard version and install a enterprise version of analysis service?
Thank you very much
Tony
Hello,I have been searching and reading a lots of information on the microsoft website about the different version of SQL server, but still can not make my decision.In term of performance, is there a real big difference between the workgroup and the standard version? The workgroup is limited to 3 GB of RAM while the standard is unlimited, would that really change the performance if my server has 16Gb or RAM?The price difference is pretty substantial so if could only have to buy the workgroup , it would be better.One more question, regarding the type of licence, my server has 2 processors, could I avoid buying 2 licences and get the Server plus CAL instead. I am using this server to host 4 web-application running on SQL server. Each database is about 15 MB.Thanks in adavance for your advises.Arno
View 3 Replies View RelatedI am wondering if it is possible to change from SQL Server Enterprise Evaluation Version to Developer Version. The reason is because the Enterprise Evaluation version expires after 180 days. So if I create reports and cubes in Enterprise Evaluation I can import them into Developer Edition right? Should I remove the Enterprise Evaluation version after 180 days or leave it then install Developer Edition?
View 1 Replies View RelatedHi,
I have tried to attatch a database ,created by SQL server Express within a C# application , in SQL server 2005 Enterprise edition, but the following error message appears:
-----------------------------
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'MEDO'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft SQL Server&ProdVer=9.00.1187.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The database 'E:X.MDF' cannot be opened because it is version 611. This server supports version 607 and earlier. A downgrade path is not supported.
Could not open new database 'E:X.MDF'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 948)
------------------------------
so , how can I solve this problem , I need to reed the data resides in the tables of 'X' database , how can I do it?? please help me.
Thanks in advance for any help.
Aya.
I have an ssis package that downloads a SQL Server 2000 database and restores it to a SQL 2005 server. Ninety-five percent of the time it runs just fine, but every so often the job fails and I get the following set of error messages in the log file. (I have had to delete some of the proprietary information for this message to satisfy my boss like putting in [Database name] in place of the actual name of the database in the error message).
OnError, Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Converting database [Database name] from version 539 to the current version 611.
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Converting database [Database name] from version 539 to the current version 611.
OnError,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Database [Database name] running the upgrade step from version 539 to version 551.
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Database [Database name] running the upgrade step from version 539 to version 551.
OnError,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,The transaction log for database [Database name] is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,The transaction log for database [Database name] is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,RESTORE could not start database [Database name].
OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,RESTORE could not start database [Database name].
OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,-1073548784,0x,Executing the query "RESTORE DATABASE [Database name]
FROM DISK = '[Path to back up file]' WITH REPLACE,
MOVE 'ASP_Live_Data' TO [Path to MDF file],
MOVE 'ASP_Live_Log' TO [Path to LDF file]" failed with the following error: "RESTORE DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,-1073548784,0x,Executing the query "RESTORE DATABASE [Database name]
FROM DISK = '[Path to backup file]' WITH REPLACE,
MOVE 'ASP_Live_Data' TO [Path to MDF file]',
MOVE 'ASP_Live_Log' TO [Path to LDF file]" failed with the following error: "RESTORE DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
OnTaskFailed,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,(null)
Does anyone have any suggestions?
Want to upgrade Evaluation version of SQL 2005 to full retail version. How would I do that. Thanks very much for your hel
Sam Commar
I have received the error message "Package migration from version 8 to version 6 failed".I have developed a SSIS package with Visual Studio 2013 which gives me PackageFormatVersion of 8. I then deploy my package to the ssisdb catalog that is running on a SQL Server 2012, this works fine but when I try to execute the package the error arises…due to SQL Server 2012 has a PackageFormatVersion of 6 and it can’t run something that has a greater version.I haven’t seen any good solution for this but one that would work for me would be to upgrade the Integration Services Server from 2012 to 2014, leaving everything else in 2012 (database, ssms, ssas, ssrs).Would this solve the package format problem? Would I then be able to execute my packages in the ssisdb catalog?
View 3 Replies View RelatedNow, I checked and verified that my backup version of SQL Server is the same as the version installed on the computer I'm restoring too.
I have SQL Server on a production machine that I backed up and want to test a full restore on a dev machine to make sure it will work when I need it to.
Now that I've run the restore command on my tape backup and go to restart the SQL server service I receive:
Configuration block version 0 is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
I'm afraid I don't understand why this is happening. If the builds are the same, then shouldn't restoring the MASTER database have worked normally and I'd be able to restart the service now?
Any thoughts or suggestions?
We want to licence a trail version 2005 EN with an fullversion of MS Sql server 2005 EN. Is that possible?
Conworx
I have the trial version of SQL Server 2005 installed and have setup a couple of databases. This trial version will expire in another few weeks. I recently purchased a copy of the software and want to install it. Will I lose my databases, user info, etc? How do I go about installing without losing anything?
View 3 Replies View RelatedWe have a 64bit os machine that we accidently loaded the 32 bit version of sql server on. We now want to upgrade it to 64 bit sql server, but we now have a production database on it. My understanding is that all I have to do is detach the production database, upgrade to 64bit sql server, then reattach the database. Is this really all I have to do?
View 4 Replies View Related
I started this thread as the last attempt to sort the issue out.
I have an SSIS package that loads data from a .csv file into my database. It works fine on my developer machine. I start it programmatically or from Management Studio or from Visual Studio, and it works. Then I deploy it to the MSDB database on the computer on which it will have its final place. There again I can start it from Management Studio or from Visual Studio (using the source file), and it works. But when I start it programmatically, it just fails telling me:
Package Warnings:
Package Errors:
The version of component "****" (11773) is not compatible with this version of the DataFlow.
Component "component "Derived Column" (13627)" could not be created and returned error code 0x80070005. Make sure that the component is registered correctly.
The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Flat File Source;Microsoft Corporation;Microsoft SqlServer v9; (C) 2005 Microsoft Corporation; All Rights Reserved; http://www.microsoft.com/sql/support;1".
component "Agreement File" (11773) failed validation and returned error code 0xC0048021.
One or more component failed validation.
There were errors during task validation.
Maybe the source of the problem is that this machine is a 64-bit one, while the developer machine is 32-bit one. But why does the package run fine when I start it from Management Studio?
Any help would be appreciated.
FMikee
Can some one here give me more insight about how to upgrade a SQL Server 2005 Standard Version (32 bits) to a SQL Server 2005 Enterprise Version (32 bits) as default instance on a Windows 2003 enterprise OS (32 bits). I want to know what is the easist way and what is the safest way. May I preserve some settings I have for the STD version, or I have to start from strach again to configure the server? Is there any catches, anything I should have attention to (We are using heavily about CLR and fulltext indexing)?
Thanks a milliom
Ning
Hello,
I installed the SQL Server 2k EnterPrise version and developer version on the same version, and the developer version is an instance "Development".
How do I expose both of them to internet? Just open both of them to port 1433? And on the client side, just say IP and IP/Development? Do I need specific set up, will they conflict?
Thanks,
The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'C.0.8.54'. the expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights. I'm getting this whenever try to access the report server via SSMS, I have tried to upgrade via the Reporting Service Configuration Manager but get an error message similar to above except it says: The database version (C.o.8.54) does not match your Reporting Services installation. This version of the database cannot be upgraded. You must use a different database. Has anyone seen this before? I can create a new database, but don't want to loose all my reports. Any ideas. Oh, not even sure if the backups exist from before this error, I've spent 2 weeks trying to get access to the server so I could try to upgrade, only to get the above results. Thanks for your help, David
View 5 Replies View RelatedI downloaded the 101 Samples installation (i.e. 101SamplesCS.msi) from Microsoft's website, which contains SQL Server database files.
While working with the databases in the "Data Access" samples from the 101 Samples projects, I get the following error:
"Database <mdf_name> cannot be upgraded because its non-release version (600) is not supported by this version of SQL Server. You cannot open a database that is incompatible with this version of sqlservr.exe. You must re-create the database..."
I assume the database files were created with a beta or CTP version of SQL Server 2005. Does anyone know where I can get an updated version of these database files or scripts to update them?
Please help.
Mike.
Can I set up sql server 7.0 standard version in cluster enviorment, what the
different betwent sql server 7.0 enterprise version and standard version? any problem I may encouter when I install the SQL server 7.0 standard version in Cluster enviorment?
Thank you very much.
Judy
Hi Guys,
We have a Sqlserver 2005 Installed on One of our servers.I wanted to know whether the installed database is a Evaluation copy or Licensed Copy.How to Evaluate this.
Do we have to check any Log files etc for knowing whether it is evaluation copy or Licensed copy.
Please help me Asap.
thanks in Advance
Regards
Arvind
Does anyone know how to get SQL Server versions, Service pack versionsand the Server that instance of SQL is running on a network. I haveseen some threads on how to list SQL servers in a network but I need tofind more info about these SQL servers.Any help appreciated..!Thx...
View 1 Replies View Relatedis there a tsql or stored proc to find when was the sqlserver got upgraded from 2000 to sqlserver 2005?
thanks in advance
we have a backup of a database from a release version with version number 9.00.1399 and we wanted to restore it to a server with version number (9.00.1116) CTP release. we were issued a version incopatibility message. is it possible to backup from a 9.00.1399 release with a backup file compatible for a CTP release, is there an available option during backup? thanks!
View 3 Replies View RelatedI ask because I was testing a Source Control solution that uses SQL Express for its database component, and when I tested it in March it worked fine, but now I can't get the Source Control software to recognize that the database is there. It creates it just fine, it just can't seem to look inside the database instance.
I've tried manipulating ports, assigning permissions, browser on, browser off, I've been at this for about a week.
The Source Control software provider won't provide any information on configuring SQL Express, so I'm here.
.MW
I'am sure this is an old quesiton but I've spent the whole morning trying to find the answer
What are the string functions suported by Jet in OLEDB queries? In particular, I am desperately looking for a replace function to remove thousands separators from imported text file
Hi.
Somewhere around I find a message, which affirmed that for perfonmance it is better to use OleDb for SQL 6.5. Is this true?.
Then el SqlClient, only have perfomance in SQL 2000?
Hi,
Does anyone know a good OLEDB provider for Oracle 7 other than the one of Microsoft and Oracle.
Thank
Martin
Is anyone using OLEDB instead of ODBC? If so why did you choose to use OLEDB vs ODBC? Our application is written in VB and we have a developer that believes switching to OLEDB from ODBC would be beneficial to us. Please give any information that you have! Thanks.
View 1 Replies View RelatedHi,
I have a DTS package which is using OLEBD provider for Oracle, it was working fine. I tried to open this package and I got this error message "There was a problem retrieving the list of OLE DB Providers"
I tried to intall MDAC8.2, it didn't help, should I reinstall SQL Server?
Thanks!
can any one please give a technical defenition for OLEDB providers
View 1 Replies View RelatedI am working on a large ASP application(s) which uses SQL Server 2K on the back end, ADO 2.7 for Data Access. The current connection strings are setup to use older ODBC drivers. I wanted to change them to OLEDB for performance gains and better support in the future.
The problem encountered is that once the driver is changed the pages become riddled with errors. There are many piece of ADO code that are supported using the new driver. Many are cursor issues or code dealing with identity columns.
Has anyone else gone through this process?
Is there a comprehensive listing of those methods that are not compliant between these two drivers?
Any input would be appreciated....Thanks
Dear gurus,
My problem: I have developed an application based on sqloledb to access a SQLserver application.
One of the operations is to update certain column of a certain table. This works fine. But with a specific catalog (database) of a specific customer the update hangs for ever on the execution of that sql sentence. Size of the mdb file is around 1 Gb.
The funny thing is that if I execute the same sql sentence (same record and same catalog) from the Query Analyzer ( that I belive it uses odbc ) the operation is done.
The update sql sentence does an update on a non-indexed column with the criteria ( where ...) using a index column (non-clustered)
I have tried the sqlmaint to rebuild indexes and check integrity and no special error report is given.
Also another funny behaviour is that if I stop and I restart sqlserver, the update of that specific record fails, but it continues of the following records to be updated.
This is not executed inside a transaction. Candidate records to be updated are stored in memory (maximum 1000), and one by one are updated.
Does anyone know an specific tool to integrity or to monitor what is going on?
I have tried the profiler , what can I monitor to detect this lock?
Best regards,
Jose