Have a table with Data and Dependencies(Foreign Keys) and Stored Procedures, views etc.
Need the Data in that table to put in different order.
For exampl, put older years in the begining or end so when sorted by year, you will get right data.
Question is: If i use view it will be based on the table with Wrong entry order and if i use Temporary Table
each time stored procedure is run, it will be created and overhead.
Example of the table is below with Wrong order.
I should have entered the old years first.
Note this is example and not the actual table!
If this example is not right, my bottom line is this:
I have entered the Data in a table and i'm getting wrong resutls when i order by Desc or Asc and now either have to delete all rows and re-enter it or have someother clever way!
If There are very lots of data to retrieve to show in any inquiry forms.each inquiry forms need to use a lot of table. There are two methods I thought First, Prepare data to Temp table when arise any transaction and Program then retrieves data from temp table. Second, Create view for retrieving data Which method is the better choice ? How ? (More fast, More performance or More flexible ? ) Please advise me....
I have a view which works fine but I cannot display the data in the Report tool because its
CCSID is HEX. If I could create it to temp table
I think then there would be an easy way to get around this problem.
This is the code:
CREATE VIEW astlib.acbalmpk AS ( (SELECT LMLTPC, COALESCE(IRLOC1,'') as IRLOC1, COALESCE(IRLOC2,'') as IRLOC2, COALESCE(IRLOC3,'') as IRLOC3, IRPRT#, IRQOH#, IRWHS#, '' as IEPRT#, '.00' as IEQOH#, '' as IELOC1, '' as IELOC2, '' as IELOC3, '' as IERIDC, '' as IEWHS#
Not sure if I am approaching this correctly. I can get name, address, zip code from a table via a VIEW. But the problem is I need to create another column called "status" in the same view that is based on "customer_end_date" if end_date> GETDATE() then 'P'(pick-up) and end_date< GETDATE () then 'I'(install). Using a stored procedure this is easy...but how would I do this in a VIEW?
I think this is a very simple question, however, I don't know the answer. What is the difference between a regular Temp table and a Global Temp table? I need to create a temp table within an sp that all users will use. I want the table recreated each time someone accesses the sp, though, because some of the same info may need to be inserted and I don't want any PK errors.
i am inserting something into the temp table even without creating it before. But this does not give any compilation error. Only when I want to execute the stored procedure I get the error message that there is an invalid temp table. Should this not result in a compilation error rather during the execution time.?
--create the procedure and insert into the temp table without creating it. --no compilation error. CREATE PROC testTemp AS BEGIN INSERT INTO #tmp(dt) SELECT GETDATE() END
only on calling the proc does this give an execution error
Simple example: declare @tTable(col1 int) insert into @tTable(col1) values (1) select * from @tTable
Works perfectly in SQL Server Management Studio and the database connection is OK to as I may generate PP table using complex (or simple) queries without difficulty.
But when trying to get this same result in a PP table I get an error, idem when replacing table variable by a temporary table.
Message: OLE DB or ODBC error. .... The current operation was cancelled because another operation the the transaction failed.
If on the source I have a new column, the script generated by SqlPackage.exe recreates the table on the background with moving the data into a temp storage. If the table is big, such approach can cause issues.
Example of the script is below: in the source project I added columns [MyColumn_LINE_1] and [MyColumn_LINE_5].
Is there any way I can make it generating an alter statement instead?
BEGIN TRANSACTION; SET TRANSACTION ISOLATION LEVEL SERIALIZABLE; SET XACT_ABORT ON; CREATE TABLE [dbo].[tmp_ms_xx_MyTable] ( [MyColumn_TYPE_CODE] CHAR (3) NOT NULL,
[Code] ....
The same script is generated regardless the table having data or not, having a clustered or nonclustered PK.
The SP UserPersist_GetByCriteria does a "SELECT * FROM tbl_User WHERE gender = @Gender AND culture = @Culture", so why am I receiving this error when both tables have the same structure?
The error is being reported as coming from UserPersist_GetByCriteria on the "SELECT * FROM tbl_User" line.
I want to insert the data from temp table to other table. Only condition is, it needs to sorted based on tool number and tool date. For example if we have ten records for tool number 1000, it should be order by tool number and then based on tool_dt. Both tables doesn't have any primary keys. Please find below my code. I removed all the unnecessary columns for simple understanding. INSERT INTO tool_summary (tool_nbr, tool_dt) select tool_nbr, tool_dt from #tool order by tool_nbr, tool_dt...But this query is not working as expected. Data is getting shuffled.
WE have a job that loads data from an Oralce DB into our SQL Server 2000 DB twice a day. The schedule has just changed so that now there is a possibility of having my west coast users impacted when it runs at 5 PM PST and my east coast users impacted when it runs at 7 AM EST. As a workaround, I have developed a DTS package that loads the data into temp tables instead of the real tables. IE. Oracle -> XTable_temp instead of Oracle -> XTable. The load sometimes takes about an hour to an hour and a half to load, so this solution works great, but I want to then lock the table, delete it and rename the temp table to table X. The pseudo code would be:
Begin Transaction
Lock Table XTable
Drop XTable
Alter Table XTable_temp rename to XTable
Release Lock XTable
End Transaction
Create XTable_temp
I see two issues with this solution. 1) I think if I can lock XTable that the lock would be released when the table is dropped and the XTable_temp was being renamed. 2) I can't find a command to rename a table.
I want to pass the 'inserted' table from a trigger into an SP, I think I need to do this by dumping inserted table into a temporary table and passing the temp table. However, I need to do this for many tables, and don't want to list all the column names for each table/trigger (maintenance nightmare).
Can I dump the 'inserted' table to a temp table WITHOUT specifying the column names?
I need to decide what is better to use: global temp table ( I can't use local one) or permanent table in SQL 2000 stored procedures. I extract data from linked server table and update several tables on our server. Those procedures scheduled to run every 3 hours.
Another question: for some reasons when I used global temp table, I wasn't able to schedule multi steps with every step executing one of the stored procedures.I think global temp tables should be visible to other stored procedures, right?
Hi everyone, I'm fairly new to sql and right now I am struggling with a script. I am trying to extract data from a normal table into a temporary table, update it in the temporary table, then put it back into the normal table. I'll display my code, let me know what you think, any suggestions are appreciated. Thanks a lot.
Hi, I wanna know is there any advantage of perf gain when using Derived Tables over Temp Tables, advice me which one is better to use. Can I create Indexes and Insert/Update records into Derived Tables.
Hi All,Hope someone can help me...Im trying to highlight the advantages of using table variables asapposed to temp tables within single scope.My manager seems to believe that table variables are not advantageousbecause they reside in memory.He also seems to believe that temp tables do not use memory...Does anyone know how SQL server could read data from a temp tablewithout passing the data contained therein through memory???Is this a valid advantage/disadvantage of table variables VS temptables?
In a previous post "Could #TempTable within SP cause lock on tempdb?" http://forums.microsoft.com/msdn/showpost.aspx?postid=2691763&siteid=1
It was obvious that we have to limit the use of #Temp table to a minimum. Let assume that some of the temp tables are really difficult to replace and we have to live with them.
Would it be easier on tempdb if the #TempTable is replaced by a table variable? Or do they all end up in tempdb?
I am trying to update a table in one database with data from a temporary table which i created in the tempdb.
I want to update field1 in the table with the tempfield1 from the #temp_table
The code looks something like this:
Use master UPDATE [dbname].dbo.table SET [dbname].dbo.table.field1 = [tempdb].dbo.#temp_table.tempfield1 WHERE ( [dbname].dbo.table.field2= [tempdb].dbo.#temp_table.tempfield2 AND [dbname].dbo.table.field3= [tempdb].dbo.#temp_table.tempfield3 AND [dbname].dbo.table.field4= [tempdb].dbo.#temp_table.tempfield4)
I get the following error: Msg 4104, Level 16, State 1, Line 2 The multi-part identifier "tempdb.dbo.#temp_table.tempfield2" could not be bound. Msg 4104, Level 16, State 1, Line 2 The multi-part identifier "tempdb.dbo.#temp_table.tempfield3" could not be bound. Msg 4104, Level 16, State 1, Line 2 The multi-part identifier "tempdb.dbo.#temp_table.tempfield4" could not be bound.
I am querying a table in oracle, the server connection to the Oracle database is determined by a criteria. Though how can I put the results from the oracle query into a temp table ?
This is the code i'm using for the query:
DECLARE @cmd VARCHAR(500) declare @Year varchar(25) set @Year = '2006'
HI ALL,iam creating a temporary table using following Stored procedure but when i complile the Stored procedure iam getting the following errorServer: Msg 2714, Level 16, State 1, Procedure SP!, Line 15There is already an object named '#TEMP2' in the database.the stored procedure is ALTER PROC SP1@SELECT VARCHAR(15)=NULL AS BEGIN IF @SELECT ='FOLDER'BEGIN SELECT DISTINCT(HIERARCHY_ID),HIERARCHY_NAME,HIERARCHY_DESCRIPTION,HIERARCHY_PARENT_ID INTO #TEMP2 FROM BM_HIERARCHY_MASTER ENDELSE IF @SELECT='PAGE' BEGIN SELECT DISTINCT(HIERARCHY_ID),HIERARCHY_NAME,HIERARCHY_DESCRIPTION,HIERARCHY_PARENT_ID INTO #TEMP2 FROM BM_HIERARCHY_MASTEREND
Which one is better to use User Defined function or Temp Table?
I am working on SQL Server 2005, and I have a user defined function that returns a table. I need to run queries on this table.
I am not sure if I should run the function once and store the results in a temp table and run queries on the temp table or call the UDF multiple times. I am concerned about performance.
