View That Would Output Data From Two Views
Aug 8, 2007
OK,
I have two data tables where depending on the time line item it is, it needs a different join.
So, it's like this:
Table Credit Card
Table Memo
If Credit Card is VISA, join on column A
If Credit Card is MA, join on column B
So, I created two views. One view has all the info joined on column A. The other view has all the info joined on column B.
How do I create a third view that will output all the data from View A and View B without making it into a cartesian product?
I can't change the table structure due to legacy application/data issues.
Thanks!
View 3 Replies
ADVERTISEMENT
Jun 25, 2015
Using t-sql, how to list all views in dependency order? I'm trying to script out the creation of views, but need to make sure they are in the correct order when i execute them.
View 2 Replies
View Related
Aug 9, 2002
SQL7, sp3
What specific permissions do you need to be able to view information_schema views? I thought public role had permissions to select on these views, but this is not the case? What do I do?
my developers have db_reader, db_writer, and db_ddladmin. They do not have db_owner. If I make them Sysadmin in sql they can view them, but that doens't fit in our security setup we have. THoughts?
Thanks,
View 2 Replies
View Related
May 1, 2006
I created a view V1 that uses an outer join with a table and calls a sub-view VS1 (ds_proj_report_date) which uses an inner join) and does an inner join with VS1. I also created another view V2 that uses inner join but does not call the sub-view VS1.
When I run the two views as below it works fine
Select * from V1
Union
Select * from V2
I then created another view V3 of the above union as
Create view V3
As
Select * from V1
Union
Select * from V2
Now when I run select * from V3, I get the following error.
Joined tables cannot be specified in a query containing outer join operators. View or function 'ds_proj_report_date' contains joined tables
View 1 Replies
View Related
Jul 11, 2007
hi guys,
i've been asked to re-write a sql view. the view itself contains several calls to other views (embedded). is there a way to get around using embedded views. I've written the same query up using temp. tables but obviously temp. tables can't be used in views?
Is there any special things I should be looking for?
View 2 Replies
View Related
Feb 24, 2006
guys, ive never worked with Views before so forgive me.
i know how to create one, and that it creates a virtual table in memory, but i've got one small question.
if i create a view:
CREATE view dbo.myView
as
select Distinct FirstName,LastName from SomeTable
When ever i reference that view, such as
Select FirstName,LastName
from myView
where LastName like 'Jo%'
does that View Refresh itself??
in other words does it run each time i Reference it??? or is it static from when i created it.
Wouldnt it be easier just to use a #TempTable or some other Table thats used to hold a few values?
thanks for any help
rik
View 3 Replies
View Related
Oct 17, 2007
I am creating a view for the table:
bellus=# select * from host_application_definition;
id | type_value | connection_value | group_value | application_value | host
----+------------+------------------+-------------+-------------------+----
From the table meta_host_types;
id | value | types | name
----+-------+-----------+--------
1 | agm | host-type | Rencid
I would like to seperate value into type_value and connection_value, because it holds both values.
Any tip?
bellus=# d host_application_definition;
Table "public.host_application_definition"
Column | Type | Modifiers
-------------------+---------+--------------------------------------------------------------------------
id | integer | not null default nextval('host_application_definition_id_seq'::regclass)
type_value | integer |
connection_value | integer |
group_value | integer |
application_value | integer |
host | integer |
Indexes:
"host_application_definition_pkey" PRIMARY KEY, btree (id)
Foreign-key constraints:
"host_application_definition_application_value_fkey" FOREIGN KEY (application_value) REFERENCES appsmarteye(id)
"host_application_definition_connection_value_fkey" FOREIGN KEY (connection_value) REFERENCES meta_host_types(id)
"host_application_definition_group_value_fkey" FOREIGN KEY (group_value) REFERENCES meta_host_grouptypes(id)
"host_application_definition_host_fkey" FOREIGN KEY (host) REFERENCES master_hosts(id)
"host_application_definition_type_value_fkey" FOREIGN KEY (type_value) REFERENCES meta_host_types(id)
d meta_host_types;
Table "public.meta_host_types"
Column | Type | Modifiers
-------------+---------+---------------------------------------------------------------------
id | integer | not null default nextval('meta_types_application_id_seq'::regclass)
application | integer |
value | text |
comments | text |
types | text |
Indexes:
"meta_types_application_pkey" PRIMARY KEY, btree (id)
"meta_host_types_id_key" UNIQUE, btree (id)
"meta_host_types_value_key" UNIQUE, btree (value, application)
"meta_host_types_value_key1" UNIQUE, btree (value)
Foreign-key constraints:
"meta_types_application_application_fkey" FOREIGN KEY (application) REFERENCES appsmarteye(id)
View 3 Replies
View Related
Jul 12, 2007
Hi guys,I've been asked to re-write a sql view. The view itself containsseveral calls to other views (embedded). Is there a way to get aroundusing embedded views. I've written the same query up using temp.tables but obviously temp. tables can't be used in views?Is there any special things I should be looking for?
View 2 Replies
View Related
Oct 15, 2015
I'd like to get results from ZTest_Contract being my result set, and would like to combine the subquery (which gets the Max) into the primary view ZTest_Contract.
CREATE VIEW [dbo].[ZTest_Contract] AS
Select
M.CUSTNMBR,
M.ADRSCode,
M.Contract_number,
M.MaxWSCONTSQ,
M.Equipment_id,
[Code] ......
View 3 Replies
View Related
Aug 9, 2007
I have 2 views which contain the following fields:
EVENT,
WEEK,
SUBSCRIPTION,
QTY,
GROSS_AMOUNT,
SEASON
The 2 views differ by SEASON. I'm attempting to combine the 2 views in to a single view or table grouping by EVENT, WEEK and SUBSCRIPTION:
EVENT,
WEEK,
SUBSCRIPTION,
Q6 (qty of season 1),
A6 (gross_amount of season 1),
Q7 (qty of season 2),
A7 (gross_amount of season 2)
Below is my select command:
------
SELECT TOP 100 PERCENT
dbo.vw_SEASON06.EVENT,
SUM(dbo.vw_SEASON06.QTY) AS Q6, SUM(dbo.vw_SEASON06.GROSS_AMOUNT) AS A6,
SUM(dbo.vw_SEASON07.QTY) AS Q7, SUM(dbo.vw_SEASON07.GROSS_AMOUNT) AS A7,
dbo.vw_SEASON06.WEEK,
dbo.vw_SEASON06.SUBSCRIPTION
FROM dbo.vw_SEASON06 FULL OUTER JOIN
dbo.vw_SEASON07 ON dbo.vw_SEASON06.WEEK = dbo.vw_SEASON07.WEEK AND
dbo.vw_SEASON06.SUBSCRIPTION= dbo.vw_SEASON07.SUBSCRIPTION AND
dbo.vw_SEASON06.EVENT = dbo.vw_SEASON07.EVENT
GROUP BY
dbo.vw_SEASON06.EVENT,
dbo.vw_SEASON06.WEEK,
dbo.vw_SEASON06.SUBSCRIPTION
ORDER BY
dbo.vw_SEASON06.EVENT
-----
This creates the view but there are some issues. If an 'EVENT' exists in dbo.vw_SEASON07.EVENT and doesn't exist in dbo.vw_SEASON06.EVENT the value of the field 'EVENT' is set to NULL because the 'EVENT' name is returned from dbo.vw_SEASON06.EVENT. The same issue exists for 'SUBSCRIPTIONS' and 'WEEK'.
How can I create a single view/table that will include all the data from these 2 views without the NULL values in EVENT or SUBSCRIPTION?
Any help is appreciated!
View 7 Replies
View Related
Oct 11, 2007
This is my first post, so if i have not posted things in the best manner please lemme know how to be more informative,clear, so that i can learn.
So i have made a view with the following command
GO
/****** Object: View [dbo].[AppraisalView_C] Script Date: 10/11/2007 12:10:43 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER VIEW [dbo].[AppraisalView_C]
AS
SELECT a.Counter
,a.DateCreated
,a.DateModified
,a.UserCreated
,a.UserModified
,a.AppraisalDate_C
,a.TypeID_C
,a.Customer_C
,a.Employee_C
,b.Notes_C
,b.Value_C
,b.AppraisalLineItemID_C
,b.AppraisalID_C
FROM dbo.Appraisal_C AS a
INNER JOIN dbo.AppraisalLineItem_C AS b ON a.AppraisalID_C = b.AppraisalID_C
---------------------------------------------------------------------------------------
the program im working on creates the SQL call to read from this view and creates
the following query
SELECT A.[AppraisalDate_C], A.[AppraisalID_C], A.[AppraisalLineItemID_C], A.[Customer_C], A.[Employee_C], A.[Notes_C], A.[TypeID_C], A.[Value_C]
FROM AppraisalView_C A
WHERE [AppraisalView_C].[AppraisalID_C] = 'APP-000006'
but I end up getting the dreaded "Msg 4104, Level 16, State 1, Line 1 The multi-part identifier "AppraisalView_C.AppraisalID_C" could not be bound." error....
I cant change the Query that is called, but i can change the view, what is wrong?
View 4 Replies
View Related
Jun 22, 2007
Hi!
There is a view in our replicated SQL-2000 database, that returns all user tables and views with replication state (0 if not included into publication, 1 if included):
Code Snippet
CREATE VIEW [dbo].[ViewREPL_PublishedObjects]
AS
SELECT TOP 100 PERCENT
CASE [xtype]
WHEN 'U' THEN 'Table'
WHEN 'V' THEN 'View'
ELSE NULL END AS [Object Type],
[name] AS [Object Name],
CASE WHEN [replinfo] = 0
THEN 0 ELSE 1
END AS [Replicated]
FROM [sysobjects]
WHERE
[xtype] in ('U', 'V')
AND [status] > 0
ORDER BY
(CASE [xtype]
WHEN 'U' THEN 1
WHEN 'V' THEN 2
ELSE 10
END),
[name]
Now we need to upgrade our database to SQL-2005, but [sysobjects] table have been changed, so neither Replicated state could be determined according on [replinfo] column value, nor User/System object according on [status].
So, I need a view with same functionality, that will work under SQL-2005 and 2008.
Please, help!
View 2 Replies
View Related
Apr 17, 2015
Please find the table data below,
ISSUE_ID QTR_YEAR QTR_NUMBER TAX ISSUE_QTR_STATUS
10001 2014110APPROVED
10001 2014215Draft
10001 2014320APPROVED
10001 2014410APPROVED
We need two reports one is QTD and another one YTD..FOR QTD report is working fine.We are doing summing of YTD report as Q1+Q2+Q3+Q4
ISSUE_QTR_STATUS as APPROVEd
We are going to select the YTD Q1 reports we need the output as 10 Summing of Q1
We are going to select the YTD Q2 reports we need the output as 10 Summing of Q1+Q2
We are going to select the YTD Q3 reports we need the output as 30 Summing OF Q1+Q2+Q3
We are going to select the YTD Q4 reports we need the output as 40 Summing of Q1+Q2+Q3+Q4
ISSUE_QTR_STATUS as DRAFT
We are going to select the YTD Q1 reports we need the output as 0 Summing of Q1
We are going to select the YTD Q2 reports we need the output as 15 Summing of Q1+Q2
We are going to select the YTD Q3 reports we need the output as 15 Summing OF Q1+Q2+Q3
We are going to select the YTD Q4 reports we need the output as 15 Summing of Q1+Q2+Q3+Q4
We need a output view level.We are not using procedure in the report.
View 2 Replies
View Related
Aug 5, 2015
I have a user who needs access to views like(dbo.viewnameabc1,dbo.viewnameabc2 and so on...) dbo.viewnameabc* and anytime the user creates the view he already have the permission to view those views....
View 3 Replies
View Related
Jan 2, 2006
How can I return values from my SQL view back into my aspx page and shove each returned value into variables I define for certain returned fields?
View 2 Replies
View Related
Dec 7, 2007
In SSMS, when editing a step in a SQL Agent job, on the Advanced screen for a step there is a button called View by the Output File. How do you get that to be enabled? It's always disabled for me and I wish I could view the file right from the job. This is something I miss from 2000. However, the button is there so I would think that I am just doing something wrong.
View 1 Replies
View Related
Jan 18, 2007
hello all,
i am trying to create a view but i keep getting the error 'View definition includes no output columns or no items in the FROM clause.'
below is the select statement that's the basis of my view. the explanation i got from the F1 help of enterprise manager was ...
View definition includes no output columns or no items in the FROM clause.
A view definition must have at least one table or table-structured object in the FROM clause, and must have at least one column in the select list. The view definition is missing one or both. Modify the view definition accordingly.
query:
select
Case_CaseId,
Logged,
CAST(DATEDIFF(minute, Logged, Waiting)/60.0 AS NUMERIC(9, 2)) AS Waiting,
CAST(DATEDIFF(minute, Logged, Investigating) /60.0 AS NUMERIC(9, 2)) AS Investigating,
CAST(DATEDIFF(minute, Logged, Rejected) /60.0 AS NUMERIC(9, 2)) AS Rejected,
CAST(DATEDIFF(minute, Logged, Resolved) /60.0 AS NUMERIC(9, 2)) AS Resolved,
CAST(DATEDIFF(minute, Logged, Solved) /60.0 AS NUMERIC(9, 2)) AS Solved,
CAST(DATEDIFF(minute, Logged, Closed) /60.0 AS NUMERIC(9, 2)) AS Closed
from
(
SELECT
Case_CaseId,
MIN(CASE WHEN case_stage = 'Logged' THEN Case_CreatedDate END) AS Logged,
MIN(CASE WHEN case_stage = 'Waiting' THEN Case_CreatedDate END) AS Waiting,
MIN(CASE WHEN case_stage = 'Investigating' THEN Case_CreatedDate END) AS Investigating,
AS Rejected, MIN(CASE WHEN case_stage = 'Resolved' THEN Case_CreatedDate END) AS Resolved,
MIN(CASE WHEN case_stage = 'Solved' THEN Case_CreatedDate END) AS Solved,
MIN(CASE WHEN case_stage = 'Closed' THEN Case_CreatedDate END) AS Closed
FROM
CaseProgress
GROUP BY Case_CaseId
) as temp
order by Case_CaseId
View 2 Replies
View Related
Jun 12, 2008
Hi.
My company has upgraded some of the database systems to SQL 2005 while other have a fresh install.
The problem we're seeing is that the view button located in the Advanced section of the steps in the Job properties windows is greyed out. The path is valid as we can copy the path and paste it at the run command and view the log.
Does anyone know how this problem can be resolved? If we select to log the results to a table; we have access to the corresponding view button but not the one for the file system logging.
We rely heavily on this feature since we used it often under SQL 2K. Can anyone provide any helpful details to resolve this or has anyone seen this problem before???
Any helpful replies would be highly appreciated.
Thanks!
View 6 Replies
View Related
Feb 26, 2008
Hi, i'm wondering which is the best way to search data in a SQL Server.
I reach data using Data Sources and Data Views and also with OLE DB Source with a Data access mode: Named query.
I have to write the data into a Flat File. So, does any one knows which is the best practice for this? Or any one of the two are good choices?
Thanks for your help.
Beli
View 6 Replies
View Related
Apr 3, 2006
Fellow database developers,I would like to draw on your experience with views. I have a databasethat includes many views. Sometimes, views contains other views, andthose views in turn may contain views. In fact, I have some views inmy database that are a product of nested views of up to 6 levels deep!The reason we did this was.1. Object-oriented in nature. Makes it easy to work with them.2. Changing an underlying view (adding new fields, removing etc),automatically the higher up views inherit this new information. Thismake maintenance very easy.3. These nested views are only ever used for the reporting side of ourapplication, not for the day-to-day database use by the application.We use Crystal Reports and Crystal is smart enough (can't believe Ijust said that about Crystal) to only pull back the fields that arebeing accessed by the report. In other words, Crystal will issue aSelect field1, field2, field3 from ReportingView Where .... eventhough "ReportingView" contains a long list of fields.Problems I can see.1. Parent views generally use "Select * From childview". This meansthat we have to execute a "sp_refreshview" command against all viewswhenever child views are altered.2. Parent views return a lot of information that isn't necessarilyused.3. Makes it harder to track down exactly where the information iscoming from. You have to drill right through to the child view to seethe raw table joins etc.Does anyone have any comments on this database design? I would love tohear your opinions and tales from the trenches.Best regards,Rod.
View 15 Replies
View Related
Jul 17, 2001
Hi folks,
Recently i've been working on a new project that would partition a large table 2 smaller tables. I then create a view to union the 2 smaller tables(table A, B). I've been getting a strange error when i try to update, insert, delete a record through the view. "View needs partitioning column"....i find this strange. Both of my table have a cluster primary key consisting of 3 columns, and one of the 3 columns(date field) consist of a check constraint. The constraint is used to determine what record goes into which table. Am i missing anything else? The really strange part is sometime it works, and sometimes i get the error message.
Any thoughts?
Joe R.
View 1 Replies
View Related
Dec 8, 2004
Hi!
Is it possible to add/delete/modidy data through views?
What is the major difference between SQL Stored procedure & SQL function?One diff i know is using SP we can execute transact-sql statements.Is there any other difference?
Thanks in advance
View 1 Replies
View Related
Feb 29, 2008
Please direct me towards good documentation about updating, inserting and deleting data using views involving multiple tables.
Thanks
View 2 Replies
View Related
Apr 10, 2008
Hello All,
I am migrating data from one database to another. I am using Multicast to seperate (legal street,legal mail and legal city) and (mail_street,mail_state,mail_zip,mail_city) also later after UNION of the above I am doing two lookups as I had to get contact ID and Customer ID from other two tables. In UNION i am matching (Mail street legal street) and so on.
I am getting double the data in the output. my input data is 1000000 and im gettin 2000000.
What could be the reasons. Please help me out.
Thank You
View 5 Replies
View Related
Aug 9, 2007
i have a textbox which a user enters a numeric value
i want it to use SqlDataSource and check if the value exists in any of the tables.
in my text box the users would enter starting from '100000' or '200000'
i want it to check the view that starts the # with '100000' and 2ed view starts '200000'
With this i can check in one of the tables and make the selection.
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:imacstestConnectionString %>"
SelectCommand="SELECT [ReportNumber] FROM [AppraisalSummaryBlue] WHERE ([ReportNumber] = @ReportNumber)">
<SelectParameters>
<asp:ControlParameter ControlID="txtReport" Name="ReportNumber" PropertyName="Text"
Type="String" />
</SelectParameters>
</asp:SqlDataSource>
How can i make this possible ?
i was thinking putting a second sqldatasource and have that check the second view but how can i make the textbox goto the correct selectcommand ?
View 1 Replies
View Related
Feb 2, 2006
Hi
I need to read a very big table more than 60,000 record but it is giving the following problem: But if it is small table there is no problem. Same problem also views.
Server Error in '/POBuilds' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine. Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>
View 1 Replies
View Related
Jan 1, 2004
someone please tell me if i can bcp or dts data in to partition views
it is failing with the error the bulk operation does not support this
View 14 Replies
View Related
May 13, 2008
I am looking for an efficient mechanism to compare data between 2 tables/views.
Rationale:
I use a proprietary tool to data transfer between 2 databases. The tool itself uses Microsoft SSIS (integration service) to transfer data. I want to make sure that the data is transfered properly. Both the source and target database are not live database. The source and target database are in seperate servers.
View 2 Replies
View Related
Jul 23, 2005
Hello,I am relatively new to doing non-trivial SQL queries.I have to get data out of 8 diff views based on a parameter Name.There is a view having name-ssn pairs. All other views have SSN field.For a person there MAY NOT be data in all the views.I have to populate data into diff tables in a Report from differentviews.I would like to know what is the best way to approach it.So far I was trying an Inner join from the Name-ssn vies to all otherviews based on the SSN and test for the name field with the inputparameter.I am thinking there will be problem of Cross join if I dont have datain all views about a person.Or the best way is to write query for each view and have all of them ina stored procedure ?Any help will be appreciatedThanksBofo
View 1 Replies
View Related
Jul 23, 2005
If column1 in SQL Server column is text: 19980701What is the syntax in the select statement to convert it to a datelike: 07/01/1998Thanks for any helpRbollinger
View 1 Replies
View Related
Jan 24, 2007
I am moving an app from Access 2003 to C#/SQL Server 2005. The Access app has one front end exe and two back end databases. One back end db is for UK users, one for US users. The tables and structures are identical, but the data is different. UK users link to the UK back end, US users to the US backend. (The queries are in the front end)
In SQL Server, the view and stored procs will be in one database (KCom), the US data tables in another database (KUS), and the UK data tables in another (KUK). All databases are on the same server.
My question is how to let the views and stored procs in KCom know whether to pull the data from KUK or KUS.
In the front end app, I use ADO.Net to deal with the SQL Server databases.
I have not been able to find a model for this, but it must be somewhat common.
I willl have a lost of nested views and stored procs, but as a simple example, say I have a view in KCom which is just "Select * From Invoice Where InvDate > '01/01/2007'. The ADO request would come from the front end app which would know whether it wanted the data from KUK or KUS. How would I get the view to get the data from one as opposed to the other (KUK vs KUS) ?
Is there some other strategy for this situation, say use of connection strings? If anyone has an idea, or knows of an explanation somewhere on the net I'd greatly appreciate it.
Many thanks
Mike Thomas
View 5 Replies
View Related
Oct 9, 2015
our group is debating whether we should use views or data marts. WE have some huge queries that can have many joins up to 20 in some cases. One part of our group wants to use views to pull this data and another thinks we should create a data mart off an SSIS package and run it early every morning and then have the users access the data directly from there.
I am not really sure how a view would speed things up. If I have 20 users and they all call a view the view is created 20 times is that not correct? Since a view is basically just a stored sql statement (not a stored proc) I am not seeing how this is any more efficient.
View 8 Replies
View Related
Sep 23, 2015
My client has on a physical server (A), the following:
1. MS SQL Server 2008R2
2. MS SQL Server (Reporting Server)
The data base is backed up fully daily to another physical server (B).
What the client would like to do is:
1. Backup just the Raw SQL Data with Tables and Views to Server B every 10 mins
Point to be noted is, there isn't any dedicated storage (NAS or SAN) just local disk storage on the server.
The reason for this is they want to run reports against this data every 10-15 mins...
How and what do I need to do to facilitate this?
View 15 Replies
View Related
