Hello, everybody.
Im getting the message error "The page cannot be found", while trying to access the Report Manager throught its virtual directory. Otherwise the Report Server url access works fine and both virtual directories have the same configuration
Any suggestion ?!?!
Reporting Services is running on Windows Server 2003
We have an application that requires write settings to reportserver virtual directory for the IUSR account when anonymous is turned on during the install. Once the install is complete, we lock down the IUSR account so that it only has browse access to the virtual directory when enabling anonymous access.
We automate the uninstall and install of our daily builds and I'm trying to figure out if I can automated this process somehow either through command line utility or in vbs.
Your help is greatly appreciated...
Eric
Hi all,
I have some problem about Reporting Service integrated for SharePoint 2007.
At first, I created 1 user named "User1" under "Domain1". User1 has role "SharePointAdmin" Group and Local Admin Group.
Then I created application pool named "RSAppPool". Its identy was "Domain1User1".
After that, I install Reporting Service and SP2.
Then I config Reporting Service to Integrated Sharepoint Mode below.
Report Server Directory Setting: "ReportServer" in "Default Web Site".
Window Service Identity:
Service Account : "Domain1User1" (Windows Accout)
Web Service Identity:
Report Server: "RSAppPool" (that created above)
Report Manager: Empty
Database Setup:
Database name: Database1 (Server Mode: SharePoint Integrated)
Credential Type : Windows Credentials
Account Name: Domain1User1
After configuration, I reset IIS and test browse to http://servername/ReportServer/ , then there is a Windows Login dialog.
I enter "Domain1User1" and User1's password. But User1 cannot right to access to "ReportServer" virtual directory.
This is error message
You are not authorized to view this page
You do not have permission to view this directory or page using the credentials that you supplied.
HTTP Error 401.1 - Unauthorized: Access is denied due to invalid credentials.
Internet Information Services (IIS)
I'm not sure. Where is I config wrong? ....
Please help me.
Thank you very much.
Hi,I've just installed SQL server and then IIS and SQLCE tools.I created a virtual directory and was trying to update the NTFSpermissions from SQLServer Connectivity management when i got thefollowing error - Access Control List (structure) invalid.Has anyone come across this and if so, what did u do to fix it.ThanksLyn
View 2 Replies View Relatedhi all,
I Installed SQL server 2005, installation completed with out any warnings.
but when trying to configure reporting services it is not configured and throwing error msg as create virtual directory.
and the error msg looks like
"
ReportServicesConfigUI.WMIProvider.WMIProviderException: The virtual directory specified is not valid. Make sure the specified name is not too long and doesn't contain illegal characters. (example: ;)
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.CreateVirtualDirectory(String virtualDirectory, String path)
"
pls give me any suggestions, Thanks for any help
sql9
Hi Guys,
Windows XP, IIS 5.1
I have written an installer that creates an MS SQL Database, creates the
necessary data tables and then imports the data into the data tables. All
this works fine.
I now need to copy the web pages to a directory on the users machine and
then make the chosen directory a virtual directory so the user can call the
pages in the usual way (http://localhost/mytestsite/index.html)
Would anyone know how to create a virtual directory using dos command line parameters. I have seen something using "IIsVdir.vbs" but I do not have this script file.
Any help would be really appreciated.
Best Regards,
Steve.
Steve
I am trying to configure the Report Manager Virtual Directory but cannot do it. In the Configure Report Server screen, the option is greyed out (there is a tick next to it to say that it has been configured, but this is greyed out too)!
Any ideas??
Thanks
Tom
We regularly deploy our product to client's sites and install a named instance of SQL Server 2005 and Reporting Services on their Windows Server. We use the instance name "lgs" during SQL setup and it automatically ensures we have a http://server/Reports$lgs and http://server/ReportServer$lgs to work with.
A recent deployment had some trouble with their OS and we have needed to reinstall the Reporting Services component of SQL. After reinstalling, the virtual directories for Reports$lgs and ReportServer$lgs are gone. I have used the Reporting Services Configuration tool to create new virtual directories but when I enter Reports$lgs or ReportServer$lgs as the names I get an error. The error says that the virtual directories cannot
be created due to illegal characters in the names.
How can I create the same virtual dirs that would have normally been created during initial installation?
Thanks,
- Jason
In SQL2K you could implement web virtual directory (using IIS) that allowed you to query a stored procedure from any HTTP browser (e.g. IE, Netscape, Opera, ...) from anywhere in the world.
For example:
http://www.mywebsvr.com/WEB_VDN?sql=exec%20Display_Info%20&contenttype=text/html
would return a HTML page of information as defined in Display_Info stored procedure. This was very useful but a little slow due to IIS overhead!
ENDPOINT & http.sys allow access SQL2005 without IIS which should be faster (?). Hence I have been trying to configure ENDPOINT to do something similar without success. Furthermore there is little information on what you can do with the "FOR TSQL" option and how to use it.
PS I don't want to use SOAP as the client will be a web browser not an apps.
Hi,
I have a problem with SQL Server 2005 Reporting Service. I installed Reporting Service in my machine.
When I was trying to configure the Reporting Service, Report Manager Virtual Directory got disabled.
I need to enable this Report Manager Virtual directory. I can see the disabled link for
Report Manager Virtual Directory and it shows the error: Report Manager Virtual Directory is not
configurable for the current mode. Kindly help me out of this problem.
Thanks
Subhendu
Hi, I have a problem with SQL Server 2005 Reporting Service. I installed Reporting Service in my machine. When I was trying to configure the Reporting Service, Report Manager Virtual Directory got disabled. I need to enable this Report Manager Virtual directory. I can see the disabled link for Report Manager Virtual Directory and it shows the error: Report Manager Virtual Directory is not configurable for the current mode. Kindly help me out of this problem. Thanks Subhendu
View 3 Replies View Related
if you R Right Person Help Me Please.....
There was a 2008 SSRS service running on server "abc".
I have a .Net UI that uses the wsdl at [URL] ....
They deployed SSRS 2012 service on a new server "xyz".
DNS points abc to xyz. Nslookup looks right shows both xyz and abc alias to the same IP.
when I try to go to [URL] .... it redirects to xyz as expected for the host name but the HTTP GET /ReportServer is appended with GET /Reports/ReportServer which doesn't exist and I get an 404 error.
I have no admin rights to see anything and I have no idea if it was an inplace upgrade or a new server. I assume it's new since the actual server name changed in nslookup. Why would it append the default virtual directory when it makes the hop to server "xyz"?
I have a an asp.net application running under IIS. this application is using two folders, the virtual directory under C:Inetpubwwwroot and the application phisical folder at C:.
I want to manage this applications .mdf database using microsoft sql server management studio express(iam running sql express with advanced services) which means i have to attach the database to Ms sql server managemet studio express tool.
What i dont know is if i should attach the .mdf file in the physical folder's App_Data folder at C:myapplicationFolderApp_data or the .mdf file in the virtual directory under C:InetpubwwwrootMyapplicationFolderApp_Data
I dont know which of the two i should attach. Where exactly is the running database, the .mdf file in the physical folder or the .mdf file in the virtual directory under wwwroot.
Hi AllI am getting an access denied message when I launch the Virtual Serveradministration screen, however I can connect through the Virtual Machineremote connectivity without any problems. Please help, I upgraded my memoryand need to change setting though Virtual Server Adminitration screen.Is there a way around this issue!Thank you in advance,James--Message posted via http://www.sqlmonster.com
View 3 Replies View RelatedI've created a number of very large databases in Ms Access that I would like to upsize to SQL Server Express. I changed the default data directory location to point to a separate drive with over 400GB of free space on my home pc. However, everytime I try to upsize or link databases using the MS Access Upsizing Wizard the data is saved in the Data directory on my current hard drive and is not saved in the default location I specified. If I create a new database in SQL Express it is saved to the new location. Any ideas on how to force upsizing or uplinked data to go to the new default data location?
View 1 Replies View RelatedIs there a way that we can tell what active directory group the person belongs to that is running the report? I know that you can detect a user id, but I need to access the Active Directory Group that they belong to.
View 1 Replies View RelatedI am trying to install SQL Server 2005. I am already administrator on this machine, and I do not understand why it keeps asking me this. I can't get all the features installed because of this error message.
The installer has insufficient privileges to access this directory: C:Config.Msi.
Please help.
at SQL Server startup, in error log:
Error : 806, Severity: 21, State: 1
Could not find virtual page for logical page <number> in database 'EMGTEST'
Error : 3414, Severity: 21, State: 1
Database 'EMGTEST' (dbid 7): Recovery failed. Please contact Technical Support for further instructions.
Database 'EMGTEST' cannot be opened - it has been marked SUSPECT by recovery. The SA can drop the database with DBCC.
.....
I reset status to Emergency mode (sysdatabases.status = -32768),
run dbcc checkdb, dbcc newalloc, dbcc textall...it all looks just fine.
I also changed database status to 12 (sysdatabases.status = 12 - select into/bulkcopy and trunc. log on chkpt.) and then run dbcc checkdb, dbcc newalloc, dbcc textall again. looked just fine.
but, if I restarted server , database will be marked 'suspect' again, because of Error 806.
any ideas?
Thanks.
Hi,
Is there any setting in IS that I should have adjusted in order to avoid this message?
Information: 0x4004800C at EXTRACT from MSCRM and AX (From Source to Working Tables for Dimension), DTS.Pipeline: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 124 buffers were considered and 124 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked
cherriesh
I have a DTS package in SQL Server 2000 which brings together data from different sources, including from an Analysis Servcies cube, and compares it.
Usually this runs perfectly, but sometimes I get an unexpected internal error from the Data Pump task which queries the cube - no other information, just the error.
This is usually when I have run the package once (manually from Enterprise Manager), then changed a global variable and run it again.
The cube it is querying is a virtual cube and the measures are calculated cells (NOT calculated members).
We are on SP4 of AS so should be up to date.
Does anyone have any ideas?
Thank you
Hi,
While connecting remote SQL server through upgrade advisor I am getting the below errors:
Error: Unable to connect to server. Reason: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Pls let me know if anyone has faced this issue and know how to fix.
Thanks in advance
-Shriniwas
Has anyone used this successfully from an OLEDB source component, or even from the Execute SQL Task? I've seen some examples of using a script component, but nothing that uses it through a connection manager.
View 6 Replies View RelatedHello,
I'm having trouble running jobs with my active directory (ADS) account. I've setup my SQL services to run under an ADS account, but jobs cannot seem to query ADS for user information. We're running Windows Server 2003 and SQL Server 2005 SP2.
Here is the error message:
==
The job failed. Unable to determine if the owner (ADSme) of job eFASRtest has server access (reason: Could not obtain information about Windows NT group/user 'ADSme', error code 0x5. [SQLSTATE 42000] (Error 15404)).
==
also this message in log:
==
[298] SQLServer Error: 15404, Could not obtain information about Windows NT group/user 'ADSme, error code 0x5. [SQLSTATE 42000] (ConnIsLoginSysAdmin)
==
I have done a *lot* of searching and cannot find the solution. I believe the 0x5 code is access denied.
The same job runs if I change the owner to a SQL login that's not an ADS account.
I'm not certain how to confirm that the SQL Agent account is the account actually querying ADS, also.
Any help would be greatly appreciated!
Thanks,
-Tony
I have one SSIS package that has FTP task which takes files from FTP and save on my local drive but i'm getting above error.
[FTP Task] Error: Directory is not specified in the file connection manager "User::ProcessingFileLocation".
In FTP Editor setting :
User::ProcessingFileLocation used SSIS variable and values sets to this is MYSERVERRaw Data
why getting this error?
when i mention direct path it is working fine BUT why not for variable.I'm using same path for other packages too they all are working fine.
I am trying to run a query on my sql server and get the following error message:
"An error occurred while executing batch. Error message is: The directory name is invalid."
how do I fix?
I receive this error message when I try and run my DTS
package:
"Error opening datafile: The filename, directory name, or
volume label syntax is incorrect."
I set the file name property of the Text File (Source) to
a valid file, but when I run the package and it returns
the above error message, it sets the file name property
to <not displayable>.
Does anyone have any experience with such a problem? If
so please help!!! Thanks
I receive this error message when I try and run my DTS package:
"Error opening datafile: The filename, directory name, or volume labe syntax is incorrect."
I set the file name property of the Text File (Source) to a valid file, but when I run the package and it returns the above error message, it sets the file name property to <not displayable>.
Does anyone have any experience with such a problem? If so please help!!! Thanks
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
When running the following statement in SQL 2005, I get the error message "Access is denied":
exec master.dbo.xp_cmdshell 'TYPE \SERVER-BSHAREFILE.TXT'
The following are true about the network:
The SQL Server is installed on SERVER-A.
SERVER-A and SERVER-B are Windows 2003 servers on the same Windows 2003 domain.
The SQL Server and SQL Server Agent services are running under the domain account SQLSERVICE.
SQLSERVICE is a member of the Domain Admins group.
The Domain Admins group is part of the local Administrators group on SERVER-B.
The SQLSERVICE account has also explicitly been given Full Control to the folder referenced by \SERVER-BSHARE
xp_cmdshell use has been enabled on the SQL Server.
If I run the following command in SQL:
exec master.dbo.xp_cmdshell 'whoami'the following is returned: DOMAINSQLSERVICE
If I change the command to access the c: drive instead of a network drive, it executes successfully.
Can anyone shed some light on why I still cannot access any of the files in this folder using xp_cmdshell?
Tim
I have trying to execute the Sendmail task in my development envinorment i face this error..I have given the clear details error message below,Please have a look.
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail. System.Net.WebException: Unable to connect to the remote server System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions ".Alternatively i use the SMTP connection to create the subscription as well,its working properly.
Here we are accessing SMTP connection manager as Virtually.Here in my client network we are using Macafee Anti virus ,We have excluded the Rsconfigration file in the excluded list.I dont know why this problem occures again using Sendmailtask in ssis?
I get this error in my Agent after starten to synchronise.
I see the access mdb been created and then deleted and renamed to
name_old.mdb
Do you have some help?
Richard
HI ,
This is a problem I encountered when I had to detach a database file (type .mdf):
1) I went to the MS SQL Management Server Studi and detached my database file successfully from a connection called Workhorse.
2) I needed to place the .mdf database file into a zip file in order to put it on a remote server. I did this using Shared Portal. This was also successful
3) However when I tried reattaching the database file, I got this error:
CREATE FILE encountered operating system error 5A(Access denied.) while attempting to open or create the physical file "CProgram FilesMSSQL ServerMSSQLData<databasename>.mdf'
Q) The database file and log file (ldf) exist in the correct directory so I don't know what happened. Can any one help?
Thanks much
Tonante