Vista IIS7 And Asp.net Reporting Services Wont Deploy
Feb 25, 2007
I am using vista, iis7 sql server 2005 sp2, vs 2005.
i first noticed that i could not deploy to the localhost server after upgrading to vista.
i installed sql server sp2 and configured the iis7 using the control panel. Everything i needed to check off got loaded exept the asp.net check box in the ApplicationDevelopmentFeatures subcategory under the iis configuration section.
It errored out when i clicked apply. there was no specific error just that it did not get added.
Controlpanel> Programs>T urnWindowsFeaturesOnAndOff> InternetInformationServices> WorldWideWebServices> ApplicationDevelopmentFeatures> Asp.net (check box)
When i click OK, afte a few minutes, i get a message:
"An error has occurred. Not all the features were successfully changed."
what good is iis7 if it cannot support asp.net?
I assume something is wrong. It is not permissions. I am the administrator account and i have assigned my account as the administrator for both sql server and reporting services.
So what is it?
Jerry Cicierega
View 22 Replies
ADVERTISEMENT
Jan 10, 2007
I am trying to configure a reporting server on my laptop at work. This laptop is running Vista and IIS 7. When I install reporting services, the option for "Install the default configuration" is disabled (greyed out) during setup. The install is successful, but then when I try to connect in the Reporting Services Configuration Manager, I get an unhandled exception ("A WMI error has occurred an no additional error information is available."). If I continue, this error continues to crop up as I attempt to configure the Report Server. When I attempt to configure the virtual directory, the configuration manager crashes. Then, when I navigate to the reportserver page, I get a page that states:
Server Application Unavailable
The web application you are attempting to access on this web server is currently unavailable. Please hit the "Refresh" button in your web browser to retry your request.
Administrator Note: An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur.
Any ideas for a solution or workaround would be greatly appreciated.
Thanks,
Dave
View 1 Replies
View Related
Apr 21, 2008
Hi,
I have a Windows 2008 server 64-bit SP1 and I have installed SQL 2005 SP2 Enterprise Edition 64-bit. My current version is 9.00.3042.00. I am trying to configure Reporting Services and I am having lots of trouble getting the Application Pools to work properly. I have followed the Microsoft Technet paper 839480 "How to Install and Configure Reporting Services on Windows Server 2008". In the "Configure Reporting Services" part, I have successfully configured everything (all arrows are green) and have the following setup:
Report Server Virtual dir: ReportServer Default Web Site
Report Manager Virtual dir: Reports Defualt Web Site
Windows Service Identity: ReportServer with a service acct login
Web Service Identity:
Report Server: ReportServer,
Report Manager: DefaultAppPool (I get an error when I try to configure it to anything else: ReportServicesConfigUI.WMIProvider.WMIProviderException: An unknown error has occurred in the WMI Provider. Error Code 800708AC at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetWebServiceIdentity(String applicationPool)
The one thing I notice in the SQL Server configuration manager is that there is a red dot next to the SQL Reporting Services services even though the green arrow is there to show it is running.
When I look in IIS7, I see the application pools Reports and ReportServer and they are both in Integrated mode. When I try to go to http://localhost/reportserver, it gives an error. It will work if I change both application pools to classic. But then when I try to go to http://localhost/reports, I get an error:
"REQUEST IS NOT AVAILABLE IN THIS CONTEXT".
I have read up on IIS7 and it says that:
"This error is due to a design change in the IIS7 Integrated pipeline that makes the request context unavailable in Application_Start event. When using the Classic mode (the only mode when running on previous versions of IIS), the request context used to be available, even though the Application_Start event has always been intended as a global and request-agnostic event in the application lifetime."
So, how do I configure these application pools to work using IIS7 with SQL 2005 Reporting Services on a Windows 2008 server? I have tried all kinds of different things based on what I am reading on the net and nothing is working. Anybody have any suggestions?
Thanks!
Isabelle
View 3 Replies
View Related
Aug 29, 2006
Hi,
can i deploy reporting services rdl files into different folders in RS?
will it be able to create the folders by itself or do i need to create them beforehand?
thanks for any answers.
-
HY
View 7 Replies
View Related
Jan 25, 2007
I am using Visual Studio 2005 and trying to deploy reports to SQL Server 2000.
I get the following message:
A connection could not be made to the report server http://aklink1/reportserver.
------------------------------
ADDITIONAL INFORMATION:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.ReportingServices.Designer)
Please help!
View 4 Replies
View Related
Mar 20, 2007
Hi,
We are currently having a problem with a client running Vista business for a mobile application that uses SQLCE RDA with the Web Synchronization on IIS7.
I have run through the Configure Web Synchronization Wizard and it doesn't create a virtual directory. I manually create the virtual dir and point it to the new folder the Configure Web Synchronization Wizard created.
Browsing to the url "http://localhost/sqlce/sqlcesa30.dll" gives a valid test string.
Here is the ?diag response...
SQL Server Mobile Server Agent Diagnostics
2007/03/20 15:39:49
General Information
Item
Value
Server Name
localhost
URL
/sqlce/sqlcesa30.dll
Authentication Type
Anonymous
Server Port
80
HTTPS
off
Server Software
Microsoft-IIS/7.0
Replication
Allowed
RDA
Allowed
Logging Level
3
Impersonation and Access Tests
Action
Status
ErrorCode
Impersonate User
SUCCESS
0x0
ReadWriteDeleteMessageFile
SUCCESS
0x0
SQL Server Mobile Modules Test
Module
Status
ErrorCode
Version
SQLCERP30.DLL
SUCCESS
0x0
3.0.5300.0
SQLCESA30.DLL
SUCCESS
0x0
3.0.5206.0
Reconciler Test
Reconciler
Status
ErrorCode
9.0 Database Reconciler
SUCCESS
0x0
8.0 Database Reconciler
SUCCESS
0x0
SQL Server Module Versions
Module
Version
sqloledb.dll
6.0.6000.16386
9.0 replrec.dll
2005.90.3042.0
9.0 replprov.dll
2005.90.3042.0
9.0 msgprox.dll
2005.90.3042.0
8.0 replrec.dll
2000.80.2039.0
8.0 replprov.dll
2000.80.2039.0
8.0 msgprox.dll
2000.80.2039.0
When a Windows Mobile or Pocket PC device tries to do a ServerExecute or Push or Pull it gets this error message with SQLOLEDB ...
HResult = -2147467259
Message = " [ 600 ]"
NativeError = 29022
numericErrorParameters = {600,0,0}
Source = "Microsoft SQL Server 2005 Mobile Edition"
Which roughly translates to from the header file ...
#define SSCE_M_INCORRECTPROVIDERVERSION 29022 // The version of the Microsoft OLE DB Provider for SQL Server is not correct. Install MDAC 2.8 or later. [,,,Version,,]
When a Windows Mobile or Pocket PC device tries to do a ServerExecute
or Push or Pull it gets this error message with SQLNCLI ...
HResult = -2147467259
Message = " [ 9 ]"
NativeError = 29022
numericErrorParameters = {9,0,0}
Source = "Microsoft SQL Server 2005 Mobile Edition"
A very similar error.
From this it seems that both SQLCE 2 and 3 seem to want MDAC 2.8+ drivers. The drivers installed with Vista for SQL Native client seem to be versioned 6.0.* and the required versioning would seem to need to be in line with MDAC 2.8.
Are there installable drivers to bump the versioning of SQLNCLI or SQLOLEDB upto MDAC 2.8+ levels?
Or is there an alternative that will make it possible to run SQLCE RDA apps with Vista as the SQLCE server (i.e. sqlcesa30.dll)?
Cheers,
Jonathan
View 5 Replies
View Related
Jul 23, 2005
When I try to put a new report in existing folder there's no problem,but now i have fresh installed Reporting Services and no Visual Studio2005. How do i open a new folder?
View 1 Replies
View Related
May 31, 2007
Hi All,
I installed SQL Server 2005 SP2 recently. After that when I try to
deploy a solution in SSRS 2005, I get a dialog box with title:
"Reporting Services Login". It has my server listed as the first row:
"http://localhost/reportserver" and then it has two text boxes asking
for Username and Password.
I checked my IIS settings and only Integrated Security is checked for
the Reports Server folder (and for the entire website). I tried to
change that to Allow Anonymous Access = Checked, but still the same
problem.
Any ideas?
Thanks! GB
View 81 Replies
View Related
Jul 19, 2011
Is there a known problem with BIS Deploy not clearing cache. I repeatly (but not always) have an issue where I will do a BIS Deploy of an RDL but when I run it, the old report runs. I can't clear this out until I explicitly log into the Report Manager and explicitly delete the RDL and re-deploy from the BIS.
Is there a workaround, fix, process change, configuration change I can do to keep this from happening?
View 7 Replies
View Related
Sep 9, 2007
Luckily I still have my old XP PC which has SS Reporting Services installed because my new PC w/Vista Home Premium does not have the Windows Authentication feature needed to install SSRS.
Does anyone know if there is an upgrade for Vista Premium to Business?? I'd much rather learn SSRS on my faster PC.
Thanks.
View 2 Replies
View Related
Jan 21, 2007
After wrestling my fair share on the Reporting services installation on Vista x64 with IIS 7.0 I figured to write out the details where the bells and whistles are found.
1. First Sergio Tarillo has written good guide for IIS 7.0 configuration so that Reporting Services accepts it. The guide is non-english, but the screenshots are self-explanatory:
http://geeks.ms/blogs/sergiotarrillo/archive/2006/10/16/4703.aspx
2. After that the resulting error is complainment about ASP.NET being 32-bit and not 64-bit registered. This actually means, that the application pool is opted to run 32-bit code. The real toggle is located under IIS management Application Pools ==> Set Application Pool Defaults... (top-right on the screen).
Under there set Enable 32-bit Applications to False.
3. You will need to install SQL Server 2005 SP2 CTP.
Note: The files seem to be named according to the KB article; however the filename does not show how old/new edition the SP2 CTP actually is (or at least I happened to have some from end of the November, when the current one as of now is December CTP - with different file size).
You can catch the December CTP here:
http://www.microsoft.com/downloads/details.aspx?FamilyID=d2da6579-d49c-4b25-8f8a-79d14145500d&DisplayLang=en
Or choose the "safer" route and use the "Where to find the latest SPs page":
http://support.microsoft.com/kb/913089
After the SP installation I got the Reporting Server Configuration Manager to work without errors. However I ran out of time to work around the other errors configuration permission issues still.
I'll post follow ups as the thing progresses.
Kalle
View 1 Replies
View Related
Mar 8, 2007
When I try to install Reporting Services on my Vista x64 machine, the following happens:
In the System Configuration Check, there is a "ASP.Net Version Registration Requirement" warning.
On the following section, Reporting Services is greyed out so cannot be installed.I have found many posts on this matter and all of them suggest going into "Turn Windows Features on / off" and enabling various IIS7 features. However, even though I have ticked every possible IIS7 feature the problem remained.
I have also installed SP2, but again this didn't help when I returned to the original installation.
Can anybody please help?
View 3 Replies
View Related
Sep 8, 2015
So I get the basics, have a script that can deploy a single report to a single server. I have other simple scripts that work as well. Now I want a script that can deploy a single report to multiple Sharepoint servers. I have about 30. I know we are probably doing this wrong, as in, we shouldn't be deploying the same report to 30 sites, as they are all all technically all on the same server however they are all independent site collections so as far as I know there is no way to deploy them to a central location and then link to them from each site.
So I tried to copy elements of my single report deploy script and duplicate the Sub Main() to Sub Main1() and Sub Main2() with multiple "ParentPath1" dims, yes I know I'm stupid. That obviously didn't work. So looking at some other scripts including my own subscription updater and I'm sure I need to do some kind of "For Each item in X" but where to start. The other lists I've seen all come from rs.Something. My list is just 30 variables in the script, how can I say for each site in this list, Publish this report?
Here's the simple script that works fine. I just don't know how to modify it to make it deploy this to multiple sites. After I figure that out, I was going to accept the challenge of deploying multiple reports to multiple sites in a single script...
Dim warnings As Warning() = Nothing
Dim parentFolder As String = "Reports"
Dim filePath As String = "filepath"
Dim reportName As String = "Report file name"
Dim parentPath As String = "Sharepoint site URL"
Public Sub Main()
[Code] ....
View 2 Replies
View Related
May 15, 2008
Hi Guys,
I was struggling with installing reporting services from Sql 2005 dev edition on windows vista. I somehow managed to install the SQLExpress edition for Reporting Services, but now i want to unistall it and install Sql Reporting Services from Sql 2005 Dev edition CD.
When I try to unistall the SQlExpress Reporting Servie instance, the screen which says unistalling components disappears in a couple of secs and when i refresh the list of programs installed under Programs and features, i can still see SQLExpress Reporting Servies, i do not understand why this is happening and probably this is the reason behind not able to see the Reproting Services check box ungreyed when installing SQL 2005 dev edition.
CAN SOMEONE HELP ME ON THIS PLEASE?
View 1 Replies
View Related
Apr 9, 2007
Hi ,
i'm a new to vista and also with sql server 2005 reporting services ..
i was able to install all the tools in sql2005 express edition except reporting services ..gives a message IIS required ..even though the IIS is running and able to browse http://localhost ..
can any one give me an idea , how to install reporting services on vista with IIS7
Thanks
View 1 Replies
View Related
Sep 5, 2007
I am just wondering....
Has ANYONE actually gotten Reporting Services to install under Windows Vista Home Premium?!?!
I have gone through every possible fix, KB Article and anecdote and I STILL can't get it to install. Every IIS option is there that should be there.
In all honesty, what was Microsoft thinking? I'll make RS compatible with every OS we offer EXCEPT this one...
What truly bites is now that Visat is out, it is almost impossible to buy a new laptop/PC without it. Looks like it's nuke my new laptop and install XP...great...
View 8 Replies
View Related
Oct 16, 2015
I have converted the VS 2013 WinForm project to VS 2015. Once I installed it on client, report viewer is asking for Microsoft.ReportViewer.WinForms 12.0.0.0.With VS 2013 projects Report Viewer 2012 Runtime worked fine. I haven't been able to locate anywhere newer version of Report Viewer Runtime/
View 2 Replies
View Related
Jun 13, 2006
Hello out there!
I've tried to install all features in the SQL Server 2005 to run on Windows Vista. The Reporting Services failed to install. I think it is because of the IIS 7.0 that 's not recognised by SQL Server.
Is there anyone who have had the same problem and is there anyone who have a suggestion to solve this problem?
View 5 Replies
View Related
Feb 13, 2008
I have a brand-new Toshiba laptop, running Vista Business, that I installed SQL Express onto. Prior to installation, I was sure to install all the requisite IIS components so SSRS would install.
The installation ran fine -- installed all components. The configuration ran fine. Everything that is supposed to be green shows green
But, when I go to http://localhost/ReportServer, I get:
Server Error in Application "Default Web Site/ReportServer"
--------------------------------------------------------------------------------
HTTP Error 404.2 - Not Found
Description: The page you are requesting cannot be served because of the ISAPI and CGI Restriction list settings on the Web server.
Error Code: 0x800704ec
Notification: ExecuteRequestHandler
Module: IsapiModule
Requested URL: http://localhost:80/ReportServer
Physical Path: C:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesReportServer
Logon User: Anonymous
Logon Method: Anonymous
Handler: AboMapperCustom-34881
Most likely causes:
No handler mapping for this request was found. A feature may have to be installed.
The Web service extension for the requested resource is not enabled on the server.
The mapping for the extension points to the incorrect location.
The extension was misspelled in the browser or the Web server.
What you can try:
Install the feature that handles this request. For example, if you get this error for an .ASPX page, you may have to install ASP.NET via IIS setup.
Verify that the Web service extension requested is enabled on the server.
Open the IIS Manager and navigate to the server level.
In the Features view, double-click ISAPI and CGI Restrictions to verify that the Web service extension is set to Allowed.
If the extension is not in the list, click Add in the Actions pane.
In the Add ISAPI and CGI Restrictions dialog box, type the path of the .dll or .exe file in the ISAPI or CGI Path box, or click Browse to navigate to the location of the file.
In the Description box, type a brief description of the restriction.
(Optional) Check "Allow extension path to execute" to allow the restriction to run automatically. If you do not check this option, the restriction status is Not Allowed, which is the default. You can allow the restriction later by selecting it and clicking Allow on the Actions pane.
Click OK.
NOTE: Make sure that this Web service extension or CGI is needed for your Web server before adding it to the list.
Verify that the location of the extension is correct.
Verify that the URL for the extension is spelled correctly both in the browser and the Web server.
Create a tracing rule to track failed requests for this HTTP status code. For more information about creating a tracing rule for failed requests, click here.
More Information... This error occurs when the necessary Web service extension is not enabled, the location or the name of the extension are misspelled or incorrectly entered.
--------------------------------------------------------------------------------
Server Version Information: Internet Information Services 7.0.
The only lead I could find when I googled this error was a reference to running appcmd to ensure that asp.net was enabled. It sure looks like it is:
C:WindowsSystem32inetsrv>appcmd list config -section:isapiCgiRestriction
<system.webServer>
<security>
<isapiCgiRestriction>
<add path="%windir%system32inetsrvasp.dll" allowed="true" groupId="ASP" description="Active Server Pages" />
<add path="%windir%Microsoft.NETFrameworkv2.0.50727aspnet_isapi.dll" allowed="true" groupId="ASP.NET v2.0.50727" description="ASP.NET v2.0.50727" />
</isapiCgiRestriction>
</security>
</system.webServer>
C:WindowsSystem32inetsrv>
Honestly... I'm out of ideas. I've been messing with this for 8 hours now, and I'm ready to fling the laptop out the window. I've completely UNinstalled SQL Server, IIS, reinstalled both, repeated the uninstall/reinstall after double-checking all files were deleted, and so on.
Does *anyone* know how to resolve this error? I checked IIS.NET and although they have a few references to it (not within the Reporting Services context) there never seems to be a definitive answer as to what the solution is.
View 17 Replies
View Related
Apr 22, 2007
Hey guys, I'm creating an ASP.Net 2.0 Web app with VB in the code behind files. I've created a few reports in Business Intelligence Dev Studio that I've deployed to a Windows 2003 Server that has SQL Server 2005 & Reporting Services 2005 on it. Last night I ran into a problem as I tested code on my laptop. And after about 3 hours I have come to the conclusion that it's the way Vista authenticates or its some kind of bug.
When I go to set the report parameters I get an error about invalid credentials and get a HTTP 401 unauthorized. I googled and searched on the forums, however it didn't make sense to me why it was working before now not working. No one was signed on AIM to test to see if it was a specific computer issue, so I decided to try and code a workaround.
I set ShowCredentialsPromt to True and I never got a prompt for credentials when the parameters were attempted to be set. I just got the error. I'm not on my laptop right now, but I will include the exact verbiage of the error message.
i have read lots of posts regarding this by my question is why does the same code not work on Vista than XP? Is that the deciding factor of my issue? I'll get some friends with Vista to test out the site and see if they get the error as well. Any insight?
View 1 Replies
View Related
Mar 17, 2008
I have a couple of questions which is better for commercial development
the standard edition sql or sql express edition?
Does the express edition 2005 in visual studio professional come with
advanced services or do you have install sp2?
Has anyone installed sql 2005 reporting services on vista ultimate
is there anything I should know besides the article How to install
sql reporting services on a windows vista computer? Thanks
I have sql express on my visual studio 2008, however I have
not installed it. Will this be a problem if I install standard ediion?
View 3 Replies
View Related
Apr 26, 2007
When I install SQL Server 2005 Express Edition with Advanced Services SP2 on Windows Vista, Reporting Services and Full-Text Search are not being installed. My user account is configured as a Standard User. When I initiate the installation, I'm prompted for the password for the administrator user account.
During the System Configuration Check, I get a warning for the IIS Feature Requirement action. The associated message says: "Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online."
KB Article 920201 ("You receive a warning message on the System Configuration Check page of the SQL Server 2005 Setup program on a computer that is running Windows Vista or a Server Core installation of Windows Server "Longhorn"") seems to address this issue. I used the Windows Features applet and selected all of the Internet Information Services items that were listed in the KB article; however, the "Windows Authentication" item was not in my list. ("IIS Metabase" and "IIS 6 WMI" were in my list but were worded differently--"IIS Metabase and IIS 6 configuration compatibility" and "IIS 6 WMI Compatibility", respectively--but I selected them both.) When I re-ran the SQLEXPR_ADV installer, I got the same warning...and Reporting Services and Full-Text Search were still not installed.
I went back into the Windows Features applet and selected all of the remaining unselected "Internet Information Services" items, and then re-ran the SQLEXPR_ADV installer. I got the same warning...and Reporting Services and Full-Text Search were still not installed.
It's frustrating that there is no obvious reason or error message as to why Reporting Services and Full-Text Search are not being installed. Are these features compatible with Windows Vista? Does anyone have an idea as to what the problem might be?
View 8 Replies
View Related
Apr 11, 2008
I have been through virtually every last posting on installing SQL Server Express with Advanced Services in this site and still have no success accessing the Reporting Services site: http://localhost.reports$sqlexpress. I get a the correct background to the site as in the tutorials, but only get "ERROR - unable to connect to the remote server", which may be indicative because this is all installed on my local machine (Dell AMD Athlon 64 X2 Dual Core 4000+ 2.11 Ghz, 1GB, Windows Ultimate). I have gone through How to install ... on a Windows Vista-based computer, KB934164, and most recently, How to configure .. to allow remote connections, kb 914277, in hopes of addressing the "remote server" issue. I still can't get past this obstacle. PLEASE HELP!! :-)
View 11 Replies
View Related
Apr 23, 2008
I would like to deploy several reports to production server, Do i need to install reporting services entire software in order to run the reports or is it possible to just have runtime files installed on it to run the reports.
please help, i have almost 100 reports to be deployed on this server which is located in other country.
Thanks for the helpful information.
(i am using SQL server 2005 / reporting services 2005.)
View 6 Replies
View Related
Mar 26, 2008
I have visual studio 2008 sql express, vista ultimate is on my computer however I have not installed sql express on my computer
I wish to install sql standard 2005 sp1 I have read microsoft's article 934164 before installing sql standard
I have a couple of questions installing sql server standard edition see sql-articles.com -installing
sql 2005
sql instances screen- can I choose default installation?
sql services screen do I need to choose domain name(I am a small business, I do not own a server, I wish to
use a third party to use sql reporting services . I have not registered my domain name
Windows authentication- I wish to use mixed mode.
I wish to configure user account later by stopping sql services and then installing sql sp2 (after windows
authentication screen)
described in microsoft article 934164
do I need to configure the server?(next screen after windows authentication)
I want to avoid a system reboot......
Is there anyway that I can make sure all the parts are installed on sql server and sql sp2?
Is it adviseable to configure my administrative account at the end of sql sp2?
How do this work? I just want to be prepared......
Thank you
View 1 Replies
View Related
Apr 11, 2007
This issue has been raised in a tangentially related thread (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=301467&SiteID=1) but no thread has been started specific to this issue. When trying to deploy a reporting services project using devenv on the command line, the following error is raised for each report.
Code Snippet
Error : Invoke or BeginInvoke cannot be called on a control until the window handle has been created
We have a single solution with multiple reporting services projects, one project for each folder in our directory tree. We are trying to use the solution file as a "make file" by issuing the following batch command.
Code Snippet
devenv.exe /Deploy Stage "c:My ProjectsReportsReports.sln" /out "ReportDeployment.out"
Is this even possible?
View 6 Replies
View Related
Mar 22, 2008
Hello,
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified.
Restored my Reportserver and ReportserverTempDB databases
Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database
System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script)
at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'?
Is it possible to migrate from 32bit to 64bit?
Any help is appreciated
View 1 Replies
View Related
May 14, 2008
I've recently installed Reporting Services 2005 on a Windows 2003 Server. Both have had SP2 applied and other necessary patches. I can't deploy a report from my desktop machine to the Reporting Instance. I get the following error:
===================================
A connection could not be made to the report server http://db04SSRS/ReportServer. (Microsoft Report Designer)
===================================
The request failed with HTTP status 503: Service Unavailable. (System.Web.Services)
------------------------------
Program Location:
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2006.ReportServiceAuthentication.GetAuthenticationMode()
at Microsoft.ReportDesigner.Project.ReportServiceClient2006.CheckAuthenticated()
at Microsoft.ReportDesigner.Project.ReportClientManager.DetectEndpointAndAuthenticate(String url, ICredentials credentials, String& authCookieName, Cookie& authCookie, EndpointType& endpointType)
at Microsoft.ReportDesigner.Project.ReportClientManager.GetCredentials(String url)
at Microsoft.ReportDesigner.Project.ReportProjectDeployer.PrepareDeploy()
Also, from SQL Server Management Studio while logged onto the Windows 2003 Server, I can connect using http://localhost/ReportServer, but I CAN NOT connect with just the servername db04SSRS. I can connect to the Analysis Services and the Database Engine with just the servername
I've seen several threads with similar issues, but none of the solutions have worked.
View 3 Replies
View Related
Jun 21, 2007
I'm making my first attempt at creating a cube using Analysis Services based on my exisiting datamart. Datasource, views, and dimensions have been defined. But comes deploying the cube, it's giving the error saying "A connection cannot be made. Ensure that the server is running." The Deploy Target server and database are the same where my datamart is. Or, maybe I don't know what I'm doing.
Would appreciate any suggestion for my enlightenment. Thanks
View 1 Replies
View Related
Apr 10, 2014
how to deploy web services on local machine. I created self certificate in IIS and then build the solution in the visual studio. After I build the solution, I found that automatically it created the virtual directories for the web services under the default website in the IIS Manager. When I click and select the browse it is not working.
View 9 Replies
View Related
Oct 12, 2015
I have created a package using SSDT2012 studio and it is failed to deploy under sql server 2012 sp1.Data inserting into sharepoint from sql server 2008 r2 database.The error says:The package failed to load due to error 0xC0010014.
View 9 Replies
View Related
Jun 5, 2015
Is it possible to deploy or import an SSIS package developed in visual studio 2010 onto a 2008 R2 integration server?
package: developed in vs2010, SQL Server: SQL Server 2008 R2.
Trying to deploy the package onto the server.
View 3 Replies
View Related
Dec 6, 2006
I'm attempting to obtain a cost effective solution for my existing customers to develop reports on their SQL 2000 Server installations using their Reporting Services 2000. With products like Visual Basic.NET 2003 becoming almost impossible to obtain, I have at least one customer who is running into a dead end.
One option possibly is the SQL Express with Advanced Services download, which has Reporting Services. My questions are as follows:
Can the report designer component of SQL Express Reporting Services be configured to connect to an external database (which would happen to be a SQL 2000 database) to establish its datasets?
Does the resultant designed report end up in an RDL file? If the customer published this report via the Reporting Services 2000 Report Manager, would the report be able to run?
Sorry for asking a question like this that I could probably answer on my own, but my customer needed this answer yesterday. I have scoured the web and microsoft sites - and posted a question on the official SQL Reporting Services cateogy ... in an attempt to answer the basic question of how to design reports for Reporting Services 2000 in the absence of Visual Basic.NET 2003 (or other .NET 2003 tools) with no success.
Thanks to anyone who can help.
-- Mark
View 1 Replies
View Related
