I am testing an application that uses mysql that works 100% fine with Microsoft Windows XP on Windows Vista Premium Home Edition.
Using Vista's ODBC Data Source Administrator I have set up and successfuly tested the DSN Connection to the Database.
However, when I call the set up DSN with the application I get [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified.
I am using the mysql-connector-odbc-3.51.12-win32.
I have tried editing the registry DSN files - the problem still persists.
trying to install sql server2005 on a windows 2003 server box.
getting msg below at the sql server . i looked at other posts on trying to uninstall SQL Native Access Client and norton antivirus. i could never find the snac on the add - remove programs and this server does not have a virus protection program yet.
here's the history of the installs on the server:
wanted to test a 2005 upgrade so:
1) installed sql server 2000 then sp4 then restored some databases to it - all OK
2) tried to upgrade to sql 2005 but ran into problems and left it at that.
had a disk drive crash on the d drive so lost the installs but not the operating system
when the drive was replaced, left alone for a while
then wanted to test a straight 2005 install
1) removed the broken 2005 attempt
2) removed the 2000
3) installed 2005 and got the error on the subject line:
TITLE: Microsoft SQL Server 2005 Setup ------------------------------
SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
i've gone through as many of the forums that i can and have tried several things - like uninstalling 2005 and installing pieces and parts but but nothing seems to work.
i am attempting to run phpbb using ms sql 2005 on the same box but get the following error during the setup
Could not connect to the database, see error message below. [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
i am not sure yet if this is an issue with sql, php or phpbb
php is installed in iis and has all the modules installed which the php msi installer supported. i can run php code but in this case when i'm running the install.php file for the phphbb setup, i fill in the values for the database and got that error
phpbb detects all the required server settings and sees that i have ms sql installed
any suggestions on what that error means or how to go about configuring odbc driver?
probably a simple issue. but i'm still new with sql stuff
In order to add a data source by using ODBC Administrator, programmatically i am using SQLConfigDataSource. Thus calling SQLConfigDataSource with the fOption set to either ODBC_ADD_DSN for creating a new DSN.
Following is the stattement specified in the source code. where type_of_driver = "Microsoft Access Driver (*.mdb)"; and parameters contains the data source source credentials information such as DSN, UID, PSW, FIL, Description, DataDirectory,DEFAULTDIR and DBQ all separated by " ".
after execution of below mentioned command an error is encountered i.e -1 is returned if the DataDirectory path exceeds certain nested directories link. for eg. the file path specified below.
C:My DocumentsClients CurrentAHW Netcare BenefitsDeliverables1-5 Results Chain - system LevelAlberta NetcareBenefits Logic System Level V01.rcm
Creating a datasource with the file name i.e Benefits Logic System Level V01 every time. rc = :: SQLConnect(hDbc, (unsigned char *)szSource, SQL_NTS, (unsigned char *)szUserName, SQL_NTS, (unsigned char *)szPassword, SQL_NTS);
Also following error message was encountered during execution of SQLConnect command.
/*szErrorMsg = 0x0012e834 "[Microsoft][ODBC Microsoft Access Driver]General error Not enough information to connect to this DSN with SQLConnect. Use SQLDriverConnect."*/
Thus followed the instruction smentioned in the error message an dtried using SQL DriverConnect() in the following manner. rc = :: SQLDriverConnect(hDbc, NULL,(SQLCHAR *)"DSN=RCM",SQL_NTS,outstr, sizeof(outstr), &outstrlen,SQL_DRIVER_NOPROMPT);
Still an error is encountered but this time it returns a RETCODE of 100 whrease earlier it had returned -1.
Inform the procedure to be followed using SQLConnect when DataDirectory path is too long.
I'm trying to find the command to open up an odbc conection inside sql2005 express. I only have ues of an odbc connector, we're conection to remedy. We will eventually be using stored procedures to extract the data we need from remedy and doing additional data crunching. I'm a foxpro programmer so once I get the correct syntax for making the odbc connector I shold be ok. Also I need a really good advanced book on sql2005. The type of book that would have my odbc answer. I've spent all morning trying to find this information and was unable to.
Thanks in advance
Daniel Buchanan.
If this was the wrong forum to post this on, please move this question to the correct one. I need this answer soon.
Two connections ==> one is using OLEDB connecting to SQL server 2005 and the other using ADO.NET's ODBC option to connect to mysql;
Two "Execute SQL Task" ==> one gets maximum ID(bigint) from a SQL server table and the other gets the maximum ID(unsigned) from a mysql's table and bind them to two variables ID1(string) and ID2 (int 64). http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=1902297&SiteID=17&mode=1 ;
And one DataFlow whose data source is DataReader Source which queries mysql "select * from table where ID > cast(@ID1 as signed) and ID <= cast(@ID2 as signed) ". To debug, I put a DataViewer between Data Flow Source and Data Flow Destination.
Run the package, I found no data coming into DataViewer and no error message as well. However if I remove the "<=" sign and change the DataReader Source query to "select * from table where ID > cast(@ID1 as signed)", It works perfectly. Initially I thought it's variable @ID2's issue. But if I replace "<=" sign with ">=" sign in the query ==> "select * from table where ID >= (cast(@ID2 as signed) -100)", there is no problem. After tried many times, I found that query just doesn't work with "<" sign or "between". Plus the result of running package tells it's successful but just no records got inserted into Data Flow Destination.
I have set up a new connection as a connection from data source, but I cannot see how to use this connection to create my Data Flow Source. I have tried using an OLE DB connection, but this is painfully slow! The process of loading 10,000 rows takes 14 - 15 minutes. The same process in Access using SQL on a linked table via DSN takes 45 seconds.
Have I missed something in my set up of the OLE DB source / connection? Will a DSN source be faster?
I'm attempting to create a new GUI for an existing MySQL database I have. I would like to program this application using Visual Studio 2005 using the Visual C++ or C# language.
I'm having trouble connecting to the database though. When I attempt to add it as a data source I get the following error: "Could not retrieve schema information for table or view"
I'm using the MySQL ODBC driver version 3.51 and MySQL versoin 5.0. Visual Studio 2005 Professional Edition.
Can someone help me get this project started? How do I connect to my database?
Im developing an asp website, but im getting this error:
Code Snippet
Microsoft OLE DB Provider for ODBC Drivers error '80004005' [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified /default.asp, line 76
I have 2 servers, the website is running from RACS-IIS-001, and the SQL server is from: RACS-SQL-001
I dont know if i use the wrong driver? im useing SQL Native Client This is my connection string:
I 'm trying to get countNumber from a select statement in MySQL source. Something likes this:
select @countNumber = count(*) from tableName where condition_1 = xxx
I use ExecuteSQLTask to get the result set with result name @countNumber along with ADO.NET connection type. I 've installed mysql-connector-net-5.0.5 cause the source is MySQL 5x.
And I got a task failed error which is described below:
[Execute SQL Task] Error: An error occurred while assigning a value to variable "new_process": "Result binding by name "@new_process" is not supported for this connection type. ".
I have this Stored Procedure: Create PROCEDURE ListEventas If MONTH(GetDate()) <= 6 Begin SELECT EventTitle, EventDuration, (CASE WHEN MONTH(StartDate) = 1 THEN Datename(Day,StartDate) + ' - ' + Datename(Day,EndDate) ELSE '' END) AS 'Jan', (CASE WHEN MONTH(StartDate) = 2 THEN Datename(Day,StartDate) + ' - ' + Datename(Day,EndDate) ELSE '' END) AS 'Feb', (CASE WHEN MONTH(StartDate) = 3 THEN Datename(Day,StartDate) + ' - ' + Datename(Day,EndDate) ELSE '' END) AS 'Mar', (CASE WHEN MONTH(StartDate) = 4 THEN Datename(Day,StartDate) + ' - ' + Datename(Day,EndDate) ELSE '' END) AS 'Apr', (CASE WHEN MONTH(StartDate) = 5 THEN Datename(Day,StartDate) + ' - ' + Datename(Day,EndDate) ELSE '' END) AS 'May', (CASE WHEN MONTH(StartDate) = 6 THEN Datename(Day,StartDate) + ' - ' + Datename(Day,EndDate) ELSE '' END) AS 'Jun'FROM dbo.tblEvent INNER JOIN dbo.tbl ON (tblEvent.EventID = tblEventdate.EventID)WHERE YEAR(StartDate) = Year(GetDate())group by EventTitle, EventDuration,StartDate,EndDateEnd Else BeginSELECT EventTitle, EventDuration,(CASE WHEN MONTH(StartDate) = 7 THEN Datename(Day,StartDate) + ' - ' + Datename(Day,EndDate) ELSE '' END) AS 'Jul', (CASE WHEN MONTH(StartDate) = 8 THEN Datename(Day,StartDate) + ' - ' + Datename(Day,EndDate) ELSE '' END) AS 'Aug', (CASE WHEN MONTH(StartDate) = 9 THEN Datename(Day,StartDate) + ' - ' + Datename(Day,EndDate) ELSE '' END) AS 'Sep', (CASE WHEN MONTH(StartDate) = 10 THEN Datename(Day,StartDate) + ' - ' + Datename(Day,EndDate) ELSE '' END) AS 'Oct', (CASE WHEN MONTH(StartDate) = 11 THEN Datename(Day,StartDate) + ' - ' + Datename(Day,EndDate) ELSE '' END) AS 'Nov', (CASE WHEN MONTH(StartDate) = 12 THEN Datename(Day,StartDate) + ' - ' + Datename(Day,EndDate) ELSE '' END) AS 'Dec'FROM dbo.tblEvent INNER JOIN dbo.tbl ON (tblEvent.EventID = tblEventdate.EventID)WHERE YEAR(StartDate) = Year(GetDate())group by EventTitle, EventDuration,StartDate,EndDateEnd When I execute it in the SQLExpress, the result returned as expected. But when I bind to Gridview I got this error: A field or property with the name 'Jan' was not found on the selected data source. How do I solve this? I am using drag and drop SQLDatasource to call the Stored Proc and VB.net is the language. Thanks
I have a custom folder layout for reporting services on our test environment so each tester can test the reports against the data in their own instances. The developers have reports in a different layout that's more in line with what will be in production. So I figured some simple RS scripting would handle things.
It was easy to create the folder structure, easy to create the shared data sources in each testers reports folders, and easy to deploy the report from the developers folder (source) to the testers report folders. However, when I try to use SetItemDataSources to change the data source in the newly duplicated reports, I keep getting an error telling me that the data source cannot be found.
Here's the relevant code fragment:
'Set report DataSource references
Dim DataSources(0) As DataSource
DataSources(0) = New DataSource
' update with new data source info
DataSources(0).Name = strDSName
Dim Item1 as DataSourceReference = New DataSourceReference
Item1.Reference = strRef
DataSources(0).Item = Item1
Console.WriteLine( "Setting report {0}, data source to {1}", strTargetReport, strRef)
strDSName is "OLTP", strRef is the path to the shared data source, "/Reports/Tester1/Data Sources/OLTP". strTargetReport is the name of the report itself, full path name to "/Reports/Tester1/Report1".
Each tester has their own folder off the main reports folder "Reports", with an incremental number, as in "Tester1". Each testers folder has it's own Data Sources folder. There is only one data source for all reports, "OLTP".
/Reports
/Reports/Tester1
/Reports/Tester1/Data Sources
/Reports/Tester1/Data Sources/OLTP
/Reports/Tester1/Report1
/Reports/Tester1/Report2
I even went into SQL Server Management Studio and tried changing the (now broken) data source setting for a report to point to the correct data source (OLTP), then copied the generated script, then ran it - and still got the data source cannot be found error. That's what my latest code shown above was based on.
I'm trying to set up a user DSN for a MS Access database in Vista. In XP it's usually just a case of going to Admin Tools > Data Sources but I only get the option of SQL Server and SQL Native Client with Vista. I'm pretty sure I found a way of doing it a while ago by opening another version of Data Sources from the command prompt but can't for the life of me remember what it was.
I am new to SQL Server. I have some basic questions.
I have installed SQL Server Developer Edition on a Windows XP Media center edition. The installation is successful. Now I am trying to create an ODBC, but I there are some options which I am not quite sure about.
e.g.
1. How SQL Server verify the authenticity of the login ID? A. Windows NT.... B. SQL Server....
Client Configuration: Server alias: ??? Named Pipes: What should be the values of [pipe name]?
or should i choose other options?....
And I when I use Query Analyzer to connect to Server, the authentication fails..
Can some one point me to the right direction, or if there's some documentation on this subject, that would be very much appreciated.
I'm trying to import tables from COBOL thru Relativity client. With SQL Server 2000, I used Other (ODBC Data Source) to do this. I cannot find a comparible data source in SQL Server 2005. What do I do?
I am new to SSIS packages and want to use an ODBC data source connected to an old Btrieve set of data files. I set up the ODBC DSN, and my SQL Server Data Connection, and can browse the tables in the Server Explorer. However with regards to my SSIS package, I'm not sure whether to use an OLE DB Source or Data Reader Source. I have futzed with both of them but haven't had any luck at seeing the tables. Can someone please give me some tips.
A data reader is using a connection manager to connect to an ODBC System DSN . A query in the SqlCommand property is provided. Data is being truncated in the only string column . The data type in data reader output-->external columns shows as Unicode string [DT_WSTR] Length 7.
The truncated output in a text file is the first 3 characters from left to right . Changing the column order has no effect.
A linked server was created in SQL Server Management Studio to test the ODBC System DSN using the following:
Data returned using "OPENQUERY" does not truncate the string column indicating that the ODBC Driver returns data as expected with sql 2005, but not with the Data Reader.
I'm trying to create an ODBC Data Source on both an NT 4.0 server and 2000 Professional workstation that are remote. I can not seem to get them to connect. What do I put in the server name field when creating the network library connection? I have tried both the ip address and fully qualified domain name of the sql server and neither worked.
As other contributors, all I am trying to do is import data from an ODBC source (spelled 'non-Microsoft data source') into a SQL 2005 table. I can easily do this in SQL 2000 with DTS, but when I use the same DSN in VS 2005 it doesn't work.
I created an integration project, and made a connection in Connection Manager to the DSN and clicked Test Connection. It succeeded, or so it claimed.
Click OK and drag a DataReader Source onto the Data Flow surface Doubleclick it and select the connection manager per above. Note the error: Error at Data Flow Task [DataReader Source[50]]: Cannot acquire a managed connection from the run-time connection manager.
What does that mean? More to the point, how to fix it?
My replication of those SQL 2000 servers gave errors: Data source (11): General Network Error. Check your network documentation... and ODBC (08S01): Communication link failure. The replication was across the WAN. I don't know where to start to troubleshoot this problem. Please help!
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.Odbc.OdbcException: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specifiedSource Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [OdbcException (0x80131937): ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified] System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) +35 System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcConnectionString constr, OdbcEnvironmentHandle environmentHandle) +131 System.Data.Odbc.OdbcConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject) +98 System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) +27 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +47 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.Odbc.OdbcConnection.Open() +37 DBConnection.open() +12 ASP.global_asax.Session_Start(Object sender, EventArgs e) +35 System.Web.SessionState.SessionStateModule.RaiseOnStart(EventArgs e) +2163182 System.Web.SessionState.SessionStateModule.CompleteAcquireState() +154 System.Web.SessionState.SessionStateModule.BeginAcquireState(Object source, EventArgs e, AsyncCallback cb, Object extraData) +542 System.Web.AsyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +90 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155 Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42 ODBC version 3.526.1830.0strconn = "DSN=testserver;uid=tester;pwd=tester;DATABASE=Test_Database"I've Test_Database on 2 machines (same data in both machines), one is in SQL 2005 server and another one is in SQL 2000 server.When the website was published, it can't work. (with both database). But it work in debug mode in Visual Studio2005.The website can't work when use ODBC connection but it work when use SqlClient.Help me solve this problem please. T_T Thanks in advance,
I am running Microsoft SQL Server 2005 Express Edition, and I am having difficulties setting up an ODBC User Data Source to connect to the SQL server. I have tried going through "Control Panel -> Administrative Tools -> Data Sources (ODBC)" to add a user data source. For the SQL Server to connect to, I have tried specifying "localhostSQLEXPRESS", "SQLEXPRESS", "(local)", etc. -- but nothing seems to work. When the DSN configuration wizard tries to connect to the SQL Server to obtain default settings, it fails with the error "SQL Server does not exist or access denied". (Same error occurs if I try connecting to this ODBC data source later.) But I know that the SQL Server exists and I have been using it through the SQL Server data provider in another application. I am new to this, so any help or pointers would be greatly appreciated. Thanks, Kumar
I have been using ODBC data source administrator for years without any problem. However, after a unsuccesful MSSQL7.0 installation, i keep getting the following message:
"An error occurred while windows was working with the control panel file
D:WINNTSystem32Odbccp32.cpl"
Any insight into this would be greatly appreciated.
We have more than 10 databases on the same server. When I try to set up ODBC connection through my desktop to a specific database (DB1) using SQL authentication, it acts weird:
-- I give the login (testkz) access to DB1, DB1 does not show up in the default database list; I tried to type in the database name, it is not taken
-- If I give 'testkz' access to two other databases (and only these two), even though I did not give access to DB1, DB1 together with some other databases show up on the default database list. Seems to me that there are some dependency among the dbs.
I am trying to setup an ODBC data source for Access. The server I'm trying to connect to is 2008 R2. I have SQL Server Management Studio installed on the computer where I'm trying to make the ODBC Data Source from. I can connect the the remote 2008 server through Management Studio, but in the ODBC wizard I do the following:
"Machine Data Source" tab, click "New" Select "User Data Source", click "Next >" Select "SQL Server", click "Next >" Click "Finish" Name: remote Description: remote Server: type the server name ie "sql.somewhere.com"
I hope this is a fairly simple problem that I'm just missing. I've installed SQL Server 2005 Developer Edition on Windows XP Professional. I'm trying to create an ODBC data source under an ID I created ("InstallOwner") that is part of the administrators group. In the Wizard, I give it a name and default to the "local" server. I selected to authenticate the ID using SQL Server authentication. However when I enter the ID and Password, I get the following error. "Connection Failed - SQL State=28000, SQL Server Error: 18456, [microsoft][SQL Native Client][SQL Server] Login Failed for user "InstallOwner". If I use the "sa" account, it works fine. Can someone point me in the right direction?
