Has anybody ever had VS2005 sometimes crash when deploying reports? It only happens once and awhile, but it is annoying. I was hoping this would go away with service pack 1, but it didn't.
Another problem that I thought would be fixed is when you try to close VS2005 after working on reports and it states "Cannot close because an active modal is active" occasionally.
BJ
Wasted a lot of time figuring out the possible cause of this. I was working in connected mode (with VSS), and when it tried to create a Report Model (after doing all its validations/checks), it had to check-out the project file, which is normal. But before doing so, it tries to check-out the .dsv file as well (data source view file from which report model is being generated). While attempting this, the visual studio crashes.
I could never guess that this could be an issue. All the time I was trying to figure out if there was anything wrong with the data in my tables.
So, for me, a simple solution worked - check-out the .dsv file before you start creating data model. I hope this may save time for others...
Hey, I was just wondering if someone could point me in the right direction on an issue. I've got the authentication portion of a custom security extension working properly (while authorization is just sort of giving everyone a pass) and all of my Googling efforts seem to be bearing little fruit. Now that authentication is in place, whenever I try to deploy a report from Visual Studio, it comes up with an error.
The error is that it is getting the authentication html login page set in web.config (as I expected), while it was looking for an xml page. I'm a bit new to this side of things so I'm not really even sure where I should be looking to see what kind of xml page it wants and such.
I don't need anyone to bother explaining the entire thing to me as I should be able to figure it out once I can get a start, but as I said I just need a kick in the right direction because my Google-fu has failed
I used an evaluation version till last week.
Was working fine so I decided to buy a Standard License.
Installed during the weekend, I had many problems till I decided to reinstall completely Windows. I have installed SP1
Everything worked fine then, ONLY not one of my SSIS packages still works; I get following error when editing the data flow task
The thread 'Win32 Thread' (0x7e8) has exited with code 0 (0x0).
Unhandled exception at 0x54fc5e89 in devenv.exe: 0xC0000005: Access violation reading location 0x00000000.
Please help, this is a disaster otherwise
I have two similar packages that are both experiencing this issue.
I need to add a script step to generate an incrementing id for the packages.
Once I add the script step, and then save the package, next time I open the package I get a "Microsoft Visual Studio has encountered a problem and needs to close" error which kills off Visual Studio.
The error signature is:
EventType: clr20r3
P1: devenv.exe
P2: 8.0.50727.762
P3: 45716759
P4: microsoft.sqlserver.txscript
P5: 9.0.242.0
P6: 443f5ab8
P7: 67
P8: d
P9: bbp0yyyc15o2dbouwcacz2m0bodqkotn
If I move the error window to one side, delete the whole Script step, and save the Package, then I can reopen the package again without the error occurring.
Here is the actual code in my script step (in case its of any assistance...)
(I have retyped it from a printout, so it may not be 100%. DOCID is supposed to increment from 1. DREF1 is a system-unique id, that takes up from where the last batch left off, and is a string prefixed by "MP")
Code Snippet
Imports System
Imports System.Data
Imports System.math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dta.Runtime.Wrapper
Public Class ScriptMain
Inherits UserComponent
Dim ndx as Int32 = 0
Public Overrides Sub Input0_ProcessInputRow(Byval Row as Input0Buffer)
'
' Add your code here
'
Dim dref as String
ndx = ndx + 1
Row.DOCID = ndx
dref = "MP" + Ctype(ndx + Variables.MPIDOrig, String)
Row.DREF1 = dref
End Sub
Protected Overrides Sub finalize()
Variables.MPID = ndx + Variables.MPIDOrig
MyBase.Finalize()
End Sub
End Class
Dear All,
I am basically new as far as SQl server 2005 concern.
I want to try out reporting services provided by sql server 2005.
That is make report using sql server 2005 and call that report from web or window application.
Please guide me in doing so or give me some useful link.
Thanks
When I launch Visual Studio 2005 and choose to start a new project...I expect to see "Report Model" as an available template (at least that is what my book says).
How can I install this?
Why is it missing? Is it due to the order of my installations? I installed RS first then Visual Studio.
Any help is appreciated.
Thanks
Hi everyone!
I'm using Microsoft Visual Studio 2005 to design reports. Is there any way to use one single image as background for a whole report-page? I only managed to set seperate background images for page header, body and footer, so the only 2 possibilities to solve this problem would be to either
* divide the image into 3 parts so that they fit exactly to the page parts or
* not use any page header and footer.
Is there another possibility that I've missed?
Any help is highly appreciated!
Thanks in advance,
Calad
Hi
View 8 Replies View RelatedI ask because I'm still looking for the source of interface problems I have in using the SSIS designer.
View 4 Replies View RelatedHi all, i am getting these type of errors in the managment tool where i try to look a stored p. or see the schema list or listing tables in a database.
THe errors looks like this one below but it does change in the InvalidArgument=Value of '***' *** area it gets numbers 448 1 5 or something else and after the error management studio doesnt work correctly, in the summory window nothing shows up, .
here is the detailed error message Please help.
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.ArgumentOutOfRangeException: InvalidArgument=Value of '448' is not valid for 'index'.
Parameter name: index
at System.Windows.Forms.ListView.ListViewItemCollection.get_Item(Int32 index)
at System.Windows.Forms.ListView.set_VirtualListSize(Int32 value)
at Microsoft.SqlServer.Management.UI.VSIntegration.AppIDPackage.RightPaneListViewer.set_VirtualListSize(Int32 value)
at Microsoft.SqlServer.Management.UI.VSIntegration.AppIDPackage.RightPaneListViewer.PopulateView()
at Microsoft.SqlServer.Management.UI.VSIntegration.AppIDPackage.RightPaneListViewer.Microsoft.SqlServer.Management.UI.VSIntegration.AppIDPackage.IReportView.SetReportSource(ReportSource reportSource)
at Microsoft.SqlServer.Management.UI.VSIntegration.AppIDPackage.RightPaneControl.InternalSetReportSource(ReportSource reportSource, IReportView newView)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
AppIDPackage
Assembly Version: 9.0.242.0
Win32 Version: 9.00.1399.00
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/90/Tools/Binn/VSShell/Common7/IDE/AppIDPackage.DLL
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
Microsoft.SqlServer.SqlTools.VSIntegration
Assembly Version: 9.0.242.0
Win32 Version: 9.00.1399.00
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/90/Tools/Binn/VSShell/Common7/IDE/Microsoft.SqlServer.SqlTools.VSIntegration.DLL
----------------------------------------
Microsoft.VisualStudio.Shell.Interop
Assembly Version: 7.1.40304.0
Win32 Version: 7.0.4054
CodeBase: file:///C:/WINDOWS/assembly/GAC/Microsoft.VisualStudio.Shell.Interop/7.1.40304.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.Shell.Interop.dll
----------------------------------------
Microsoft.VisualStudio.OLE.Interop
Assembly Version: 7.1.40304.0
Win32 Version: 7.0.4054
CodeBase: file:///C:/WINDOWS/assembly/GAC/Microsoft.VisualStudio.OLE.Interop/7.1.40304.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.OLE.Interop.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
Microsoft.SqlServer.SqlTDiagM
Assembly Version: 9.0.242.0
Win32 Version: 9.00.1399.00
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SqlServer.SqlTDiagM/9.0.242.0__89845dcd8080cc91/Microsoft.SqlServer.SqlTDiagM.dll
----------------------------------------
Microsoft.DataWarehouse.SQM
Assembly Version: 9.0.242.0
Win32 Version: 9.00.1399.00
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/90/Tools/Binn/VSShell/Common7/IDE/Microsoft.DataWarehouse.SQM.DLL
----------------------------------------
Microsoft.SqlServer.Instapi
Assembly Version: 9.0.242.0
Win32 Version: 9.00.1399.00
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SqlServer.Instapi/9.0.242.0__89845dcd8080cc91/Microsoft.SqlServer.Instapi.dll
----------------------------------------
ObjectExplorer
Assembly Version: 9.0.242.0
Win32 Version: 9.00.1399.00
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/90/Tools/Binn/VSShell/Common7/IDE/ObjectExplorer.DLL
----------------------------------------
ConnectionDlg
Assembly Version: 9.0.242.0
Win32 Version: 9.00.1399.00
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/90/Tools/Binn/VSShell/Common7/IDE/ConnectionDlg.DLL
----------------------------------------
SqlWorkbench.Interfaces
Assembly Version: 9.0.242.0
Win32 Version: 9.00.1399.00
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/90/Tools/Binn/VSShell/Common7/IDE/SqlWorkbench.Interfaces.DLL
----------------------------------------
Microsoft.SqlServer.CustomControls
Assembly Version: 9.0.242.0
Win32 Version: 9.00.1399.00
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SqlServer.CustomControls/9.0.242.0__89845dcd8080cc91/Microsoft.SqlServer.CustomControls.dll
----------------------------------------
Accessibility
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------
SqlMgmt
Assembly Version: 9.0.242.0
Win32 Version: 9.00.1399.00
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/90/Tools/Binn/VSShell/Common7/IDE/SqlMgmt.DLL
----------------------------------------
Microsoft.SqlServer.RegSvrEnum
Assembly Version: 9.0.242.0
Win32 Version: 9.00.1399.00
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SqlServer.RegSvrEnum/9.0.242.0__89845dcd8080cc91/Microsoft.SqlServer.RegSvrEnum.dll
----------------------------------------
EnvDTE
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC/EnvDTE/8.0.0.0__b03f5f7f11d50a3a/EnvDTE.dll
----------------------------------------
Microsoft.NetEnterpriseServers.ExceptionMessageBox
Assembly Version: 9.0.242.0
Win32 Version: 9.00.1399.00
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.NetEnterpriseServers.ExceptionMessageBox/9.0.242.0__89845dcd8080cc91/Microsoft.NetEnterpriseServers.ExceptionMessageBox.dll
----------------------------------------
System.Data
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
Microsoft.SqlServer.ConnectionInfo
Assembly Version: 9.0.242.0
Win32 Version: 9.00.1399.00
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SqlServer.ConnectionInfo/9.0.242.0__89845dcd8080cc91/Microsoft.SqlServer.ConnectionInfo.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Microsoft.SqlServer.SmoEnum
Assembly Version: 9.0.242.0
Win32 Version: 9.00.1399.00
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SqlServer.SmoEnum/9.0.242.0__89845dcd8080cc91/Microsoft.SqlServer.SmoEnum.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Transactions
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
----------------------------------------
System.EnterpriseServices
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
----------------------------------------
Microsoft.SqlServer.Smo
Assembly Version: 9.0.242.0
Win32 Version: 9.00.1399.00
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SqlServer.Smo/9.0.242.0__89845dcd8080cc91/Microsoft.SqlServer.Smo.dll
----------------------------------------
Microsoft.SqlServer.SqlEnum
Assembly Version: 9.0.242.0
Win32 Version: 9.00.1399.00
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SqlServer.SqlEnum/9.0.242.0__89845dcd8080cc91/Microsoft.SqlServer.SqlEnum.dll
----------------------------------------
Microsoft.SqlServer.BatchParser
Assembly Version: 9.0.242.0
Win32 Version: 2005.090.1399.00
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/Microsoft.SqlServer.BatchParser/9.0.242.0__89845dcd8080cc91/Microsoft.SqlServer.BatchParser.dll
----------------------------------------
msvcm80
Assembly Version: 8.0.50608.0
Win32 Version: 8.00.50727.42
CodeBase: file:///C:/WINDOWS/WinSxS/x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.42_x-ww_0de06acd/msvcm80.dll
----------------------------------------
System.Management
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Management/2.0.0.0__b03f5f7f11d50a3a/System.Management.dll
----------------------------------------
ObjectExplorerReplication
Assembly Version: 9.0.242.0
Win32 Version: 9.00.1399.00
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/90/Tools/Binn/VSShell/Common7/IDE/ObjectExplorerReplication.DLL
----------------------------------------
Microsoft.ReportViewer.WinForms
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.42
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.ReportViewer.WinForms/8.0.0.0__b03f5f7f11d50a3a/Microsoft.ReportViewer.WinForms.dll
----------------------------------------
SQLEditors
Assembly Version: 9.0.242.0
Win32 Version: 9.00.1399.00
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/90/Tools/Binn/VSShell/Common7/IDE/SQLEditors.DLL
----------------------------------------
Microsoft.VisualStudio.TextManager.Interop
Assembly Version: 7.1.40304.0
Win32 Version: 7.0.4054
CodeBase: file:///C:/WINDOWS/assembly/GAC/Microsoft.VisualStudio.TextManager.Interop/7.1.40304.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.TextManager.Interop.dll
----------------------------------------
SqlManagerUI
Assembly Version: 9.0.242.0
Win32 Version: 9.00.1399.00
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/90/Tools/Binn/VSShell/Common7/IDE/SqlManagerUi.DLL
----------------------------------------
Microsoft.AnalysisServices
Assembly Version: 9.0.242.0
Win32 Version: 9.00.1399.00
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.AnalysisServices/9.0.242.0__89845dcd8080cc91/Microsoft.AnalysisServices.dll
----------------------------------------
Microsoft.SqlServer.GridControl
Assembly Version: 9.0.242.0
Win32 Version: 9.00.1399.00
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SqlServer.GridControl/9.0.242.0__89845dcd8080cc91/Microsoft.SqlServer.GridControl.dll
----------------------------------------
Microsoft.SqlServer.DlgGrid
Assembly Version: 9.0.242.0
Win32 Version: 9.00.1399.00
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SqlServer.DlgGrid/9.0.242.0__89845dcd8080cc91/Microsoft.SqlServer.DlgGrid.dll
----------------------------------------
Microsoft.SqlServer.DataStorage
Assembly Version: 9.0.242.0
Win32 Version: 9.00.1399.00
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SqlServer.DataStorage/9.0.242.0__89845dcd8080cc91/Microsoft.SqlServer.DataStorage.dll
----------------------------------------
System.Design
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Design/2.0.0.0__b03f5f7f11d50a3a/System.Design.dll
----------------------------------------
Microsoft.VisualStudio
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 built by: RTM
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.VisualStudio/2.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.dll
----------------------------------------
Microsoft.VisualStudio.Shell
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.VisualStudio.Shell/2.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.Shell.dll
----------------------------------------
Microsoft.VisualStudio.Shell.Interop.8.0
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC/Microsoft.VisualStudio.Shell.Interop.8.0/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.Shell.Interop.8.0.dll
----------------------------------------
System.Drawing.Design
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing.Design/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.Design.dll
----------------------------------------
Microsoft.VisualStudio.Designer.Interfaces
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.573
CodeBase: file:///C:/WINDOWS/assembly/GAC/Microsoft.VisualStudio.Designer.Interfaces/1.0.5000.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.Designer.Interfaces.dll
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Hello,
I know this question has been asked here before, but it was ridiculously answered : http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=98764&SiteID=1
I have a text object on my crystal report, to which I programmatically want to assign text in CS. It all works fine, except that if I have html tags in there, the text doesn't get formatted, it just displays the html tags as text as well.
Now in thread linked above, the answer was: right click the text object, and format the text object, hit paragraph text and select text interpretation to HTML. The only problem is, that for a text object, it doesn't have the text interpretation option. It's only an option for a formula field. It says so in the tech support link posted inside the post itself!!!
So if you have any idea how I can do this, please someone help me out. I am new to crystal, and there's not much helpful info on it online. I've searched for this for hours, and no solution.
Thanks
I'm very confused. I installed Visual Studio 2005 and thought I understood that SQL Server 2005 came with it, but it appears that it's SQL Server 2005 - Express. Can anyone tell me what I need to do in order to get Data Transformation Services loaded or the equivalent of DTS in SQL Express?
I have written a report visual studio. The report has 10 multi-value parameters that pull data from their individual data sets within the reports. When running the report from within Visual Studio it renders fine. There are no errors reported, only a warning related to a pathname I have use to retrieve image data and display on the report.Deployment of the report is error free.When I view the report I briefly get the "Loading" splash window, but then nothing. None of the headers or static text is displayed. The results window is blank.
The report defaults all the parameter values. In trying to debug the issue I have found by reducing the number of parameter values the report will render. Once I have all the values added, the report does nothing.Below is the query being used for the report. The where clause in the query shows the parameters being used and the syntax.We are running on Windows Server 2008 R2 and SQL Server 2008 R2.
Ralph
SELECT RTRIM(a.ITEMNMBR) AS Style, RTRIM(a.ITEMDESC) AS Description, a.ITMSHNAM AS UPC, c.LOCNCODE AS Store, d.LISTPRCE AS ListPrice, a.CURRCOST AS Cost,
a.USCATVLS_1 AS [Main Category], a.USCATVLS_2 AS Market, a.USCATVLS_3 AS [Alternate Retail], a.USCATVLS_4 AS Country, b.ITEMXTRAS_1_Type AS Type,
b.ITEMXTRAS_2_Finish AS Finish, b.ITEMXTRAS_3_SubCategory AS SubCategory, b.ITEMXTRAS_4_Department AS Department,
[code]...
I am getting the following error when I attempt to deploy my test report.
"Failed to Deploy Report, The user 'XXX/IUSR_XXX' has insufficient rights to perform this action."
Has anyone gotten this error before, I have tried every permission option I could with the IUSR account by adding it to each folder etc ...and still get no resolve. Anyone have a fix for this bug ?
Responses are much appreciated!!
I recently installed the Evaluation Edition of SQL Server 2005 x64 and it appears that MS Visual Studio 2005 is installed in stead of SQL Server Business Intelligence Development Studio. When I choose new project the only template available is "Blank Solution". How do I get all the templates (i.e. Analysis Server Project, Integration Services Project, Report Model Project, Report Server Wizard project, etc.)?
Or would it be better to uninstall MS Visual Studio 2005 and attempt to reinstall BIDS?
I am having a hard time finding the report path for the web report Viewer in visual studio 2005. I have tried entering the absoute path to the folder containing the reports. this gave the error that the path is invalid. I have also tried reletive paths using / and // in the front of the name for each report. these all fail. could someone please assist with finding the path to the reports? the reports reside on another server away from the one being used for development of the web site.
thanks
Kof
I am new to visual studio and I am still not sure of all its components and features.
I installed visual studio 2005 standard edition but cannot find SQL Server Management Studio?
I guess this must be because it is not included with Visual studio 2005 standard. Is it included with VS 2005 professional?
I want to add pictures of products to my shopping site using an SQL database and I’ve been told that SQL Server Management studio is required as it is a graphical tool.
How would I go about obtaining the SQL server management studio. There seems to be different versions of SQL server that it is confusing to know which one to purchase.
Will the SQL server 2005 version that comes with Visual studio standard be sufficient for me now right? I want to create a shopping site with hundreds, perhaps even thousands of products. I want to use an SQL server 2005 database. The database will include ‘dynamically generated’ product images if that is the correct terminology.
My goodness, it seems I still have so much to learn.
Thanks
...and Report Builder?
I have SQL Server 2005 Express and Reporting Services and Report Manager up and running...
Thanks
Hi,
Is there any mean to disable the visual studio ide clearing of report parameters everytime you preview the report?
Thanks.
How do I install the report designer in Visual Studio 2008?
Edit: I mean, how do I install the SQLRS 2005 Report Designer in Visual Studio 2008?
Greetings,
I have a report that was previously deployed to a reporting services host (running Reporting Services 2005 SP2) and I'm running the version of Visual Studio that came with reporting services on the same reporting serviceshost. The deployed report was never opened on this particular server, so it doesn't appear in the recent files list. Is there a trick to open a deployed report in all of Visual Studio's report editing glory? Visual Studio has a File Open option to open an analysis services database, a project, or a file. A "deployed report" seems to be none of these options since it's an RDL file stored somewhere that IIS can find it. I know that I can use Report Manager and export the RDL for the report and then edit that RDL file in Visual Studio, but doing that appears to disable all of Visual Studio's report editing features (ie it works no better than notepad). What's the trick to get Visual Studio to open the deployed report and allow all of it's editing tools to work properly and then save the updated report back to the reporting services server?
Thanks,
Ron
microsoft.reportviewer.design for Version 12 (2014) The redistributable package is just that, and does not include this dll So Visual Studio cannot create a V12 object.
The workaround is to use V11 and patch the inserted code.
Where can we download the design dll?
Hi guys
I seem to be having a bit of trouble deploying my reports from my Reporting Services Project in Visual Studio to my Sharpoint server.
Both the reporting server and sharepoint are installed on the same server.
The settings within my reporting server are as follows (where report is the site name):
TrargetDataSourceFolder - https://server/Report/Shared Documents/DataSources
TrargetReportFolder - https://server/Report/Shared Documents
TrargetServerURL - https://server/Report
I have not yet changed over all my reports to use fully qualified urls yet. As we have multiple domains in which the reports need to go through before they hit the production server and i haven't yet decided how i am going to handle the issues of the reports requiring fully qualified addresses (if someone has a way i would love to know).
I was getting the following error when i tried to deploy the projects but i delete all extensions from the blocked file types and that error went away. I can only guess that there was a file type it didn't like.
Error - "The file you are attempting to save or retrieve has been blocked from this Web site by the server administrators."
When i deleted all the file extensions i now get the following error.
Error - "File Not Found."
Just wondering if anyone has had any success with visual studio and sharepoint deployment or run into this problem.
Thanks
Anthony
I created and deployed a report to my Report Server and everything is functioning fine. However, my laptop was inadvertantly wiped when I was having it serviced and I had not backed up this report to VSS. Is there a way to import that deployed report back in to Visual Studio or do I have to basically rebuild my report from scratch?
View 6 Replies View RelatedHi,
I'm building a custom Data Processing Extension (DPE), and I was hoping test it inside Visual Studio report designer, instead of doing it on the server side in Reporting Services.
Note that I have gotten the RS configuration working.
Does anyone know how to set this up for VS?
Thanks!
I want to add a detail line on a report in visual studio. How can I do it?
View 9 Replies View RelatedI have an assignment where I am asked to create a test report with Cascaded parameters in a report for use on an Intranet. Found a good guide on a site named slqtips. The only problem is, that when I have created my data source, my data sets and my queries, I should go to the window "Report parameter properties", for specifing the data which should be included in the choices in the report, and I cannot find it! As a matter of fact the milieu I work in, Report designer in Visual Basic Studio Shell 2013, on a MS SQL 2012 Server, looks different in many way compared to the guide. It actually also differs from the Pictures in the book "Microsoft SQL Server 2012 Reporting Services" I also try to use for the purpose.Am I perhaps working in the wrong place, or what can the problem be? Is this Visual basic 2013 Window some kind of upgrade which is different from the original version where you used to work with Report designer?
View 6 Replies View RelatedI am trying to import Access reports using Visual Studio 2005 and Access 2007. SQL Server 2005 with Reporting Services is also installed. I select Reports in the Solution Explorer and then Import Reports... Microsoft Access and browse to my Access database. After I select the database I see it open briefly as if it is trying to import the reports but then Access quickly closes and a error pops up: "You already have the database open." I have checked and double checked and the database is not open. I have even tried several different databases and the same errror occurs. Any help would be greatly appreciated.
Hello, I would like to know if anyone here has any information on how to change the default version of SQL Server 2005 Express which ships with Visual Studio 2005 to the new SQL 2005 Express SERVICE PACK 1?
I see a file under disc:vswcuSSESQLEXPR.exe I am wondering if changing that file with the new one from Microsoft Download Center will do it...
There's another file under that folder named sqlexpr32.exe I am wondering what it's for?
Thanks in advance.
Hello, I would like to know if anyone here has any information on how to change the default version of SQL Server 2005 Express which ships with Visual Studio 2005 to the new SQL 2005 Express SERVICE PACK 1?
I see a file under disc:vswcuSSESQLEXPR.exe I am wondering if changing that file with the new one from Microsoft Download Center will do it...
There's another file under that folder named sqlexpr32.exe I am wondering what it's for?
Thanks in advance.
Hello,
we have a SQL server 2005 with Visual studio Prof. 2005 in the
employment.
The debuggers function only in Visual studio correctly, as long as no
code on the SQL server must be implemented.
If a BREAK POINT in a Stored Procedure is set, this is not activated,
since this cannot be bound.
Does someone know, what it lies and can like one it eliminate?
Thank you for your assistance in advance.
Yours sincerely
Big_Ben_31
This entry was translated automatically with the translation
service babel.altavista.com from the German into English.
Hi, I am running SQL Server 2005 x64 DE on Vista x64. I installed MS VS 2005 Pro. Edition. During the setup of VS, I did a custom install, un-checking the SQL Express addition box. After installation, I received errors that indicated the SQL Express did not install. Even though I do not have SQL Express installed on my machine, MS Update says that I need SQL Express SP2. My SQL DE is up to date with SP2 and MS Update indicates as "optional" that I need SQL SP2.
Is SQL Express a necessity for VS Pro? If not, why is MS Update indicating that I need SQL Express SP2? In addition, why is MS Update telling me I need SQL SP2 when it is already installed?
Note: I installed SQL SP2 manually, not through MS Update. This makes me believe that MS Update is not detecting it.
Thanks in advance to anyone who can help,
Abel