I installed Visual Studio 2008 Beta 2 Professional yesterday and now none of my SSIS packages will function. Each time I attempt to run the transform, I obtain the folloiwing error:
Retrieving the COM class factory for component with CLSID {7816B7A3-CD60-4539-BD38-C35AFC61F200} failed due to the following error: 80040154.
I have tried to apply every patch I can find for SQL Server 2005 - inclduing both the SP2 and SP2a patches. I have tried reinstalling MSXML 3.0 - nothing seems to work.
I have recently installed Visual Studio 2008 Beta 2 on a development machine that was running SQL Server 2005 SP2a without any issues. Not I find that I can no longer run any of my SSIS packages and I keep getting the following error:
Retrieving the COM class factory for component with CLSID {7816B7A3-CD60-4539-BD38-C35AFC61F200} failed due to the following error: 80040154
Per other posts, I have reinstalled MSXML 3.0 to no avail and I have looked for every SQL Server patch I can find - I appear to have all of the latest patches for SQL Server.
I can't open solutions created in Visual Studio 2005 in Visual Studio 2008
--------------------------- Microsoft Visual Studio --------------------------- 'TransformFoxData.dtproj' cannot be opened because its project type (.dtproj) is not supported by this version of Visual Studio.
To open it, please use a version that supports this type of project. --------------------------- OK Help --------------------------- Does that mean it is a requirement to have SQL Server 2008 installed ( which I don't want ) to make it work in Visual Studion 2008. I just uninstalled VS 2005.
My home machine has sql 2005 and Visual Studio 2005 installed. I uninstalled VS 2005 (RTM) and installed VS 2008 (RTM) in its place. I then found that the SSIS templates were missing. Lesson: don't uninstall VS 2005 if you want to use SSIS 2005!
1. Is there any "workaround" to this issue?
2. (If the answer to 1 is "No") I will install VS 2008 side-by-side with VS 2005 on the same box. When the SSIS issue is finally resolved, can I uninstall VS 2005 without doing damage to the VS 2008 install?
when I try to make a sqldatasource with visual studio 2008 and SQLServer 2008 . I found that there are a message that the visual studio 2008 can support only SQLServer 2005 and SQLServer 2000how to make my visual studio 2008 support SQLServer 2008
This should be simple - using the server explorer I select the server and then the database that's running on that server. It lets me test the database connection at that point - which does work.
Then when I try to add the database it says -
Could not load file or assembly Microsoft.SqlServer.Management.Sdk.Sfc, Version=10.0.0 ... The system cannot find the file specified.
So far as I can see the specified file is Microsoft.SqlServer.Smo.dll which has a current version of 9.0.242.0 and sits within the SQL Server files. That is also the version number held in the registry.
The version of SQL is 2005. The database was created using Create Database through VS 2008, .net 3.5.
Also, I installed VS 2008 first, which puts in SQL Compact. And then tried installing SQL 2005 Development which still gave the same error message. So I uninstalled SQL Compact and SQL 2005. And then did a clean install of SQL 2005 Developer. Does VS 2008 cope with this?
Is there a version 10 of SMO? Or is there somewhere within SQL or Visual Studio where it could be holding a version number of 10 for the dll? Or any other ideas?
I have a desktop application that uses an Access DB. Now i have converted it to Visual Studio 2008 and tried the SQL CE Edition. I wrote all the methods, create the database and the tables on the fly and seems to work really fine. The database is 20MB big, but the performance is vey bad. I mean with Access it's very fast, you actually don't see how slow it is, and with the SQL CE now, it takes 7 seconds !!!! for a few access instead of under 1 second with Access.
I can't imagine that this is normal, there must be something i am really missing in my code. Looks something like this:
Code Snippet SqlCeEngine engine = new SqlCeEngine("Data Source = URANO.sdf"); engine.CreateDatabase(); engine.Dispose(); // Verbindung öffnen sqlConnection = new SqlCeConnection("Data Source = URANO.sdf"); sqlConnection.Open(); // creating the tables here with data sqlCommand = new SqlCeCommand("SELECT ID FROM Laender WHERE Name=@Name", sqlConnection); sqlCommand.Parameters.Add("@Name", SqlDbType.NVarChar, 30); sqlCommand.Parameters[0].Value = land; sqlDataAdapter = new SqlCeDataAdapter(sqlCommand); sqlDataSet = new DataSet(); sqlDataAdapter.Fill(sqlDataSet, "Laender"); landID = "" + (((int)sqlDataSet.Tables["Laender"].Rows[0][0]) + 1);
this takes 1 - 2 seconds
btw: the whole class is static and the variables also are static.
Would it be better to load all the database tables into datasets, and only work with the datasets in memory ? Well i thought that the SQL CE Engine, would load the database into memory and be just fast. I mean we have 2 GB of memory or 1 the most of us, 20MB isn't that much.
Can I author report projects in VS Studio 2008 that I deploy to a RS2005 Report Server?
Our development staff has upgraded to VS2008 for our DLLs, Web sites, and console apps... no problem there whatsoever. But we have SQL2005... obviously, since SQL2008 appears to be along way off.
So, it seems like an obvious question... although I'm dreading the response. My experience with getting RS2005 installed and configured correctly was simply horific. In fact, so bad, I'm considering dumping RS altogether and going with a more reliable 3rd party tool... MS has truly done everything in the power to botch this one or so it would seem.
I am trying to integrate Sql Clr with Visual studio 2005, but i am getting the following error when i try to deploy the solution:
CREATE ASSEMBLY for assembly 'SQLCLRIntegrationDemo' failed because assembly 'SQLCLRIntegrationDemo' is not authorized for PERMISSION_SET = EXTERNAL_ACCESS. The assembly is authorized when either of the following is true: the database owner (DBO) has EXTERNAL ACCESS ASSEMBLY permission and the database has the TRUSTWORTHY database property on; or the assembly is signed with a certificate or an asymmetric key that has a corresponding login with EXTERNAL ACCESS ASSEMBLY permission. If you have restored or attached this database, make sure the database owner is mapped to the correct login on this server. If not, use sp_changedbowner to fix the problem. SQLCLRIntegrationDemo
I have even set the Permission to External in the Project --> Properties --> Database tab. But still i am getting the above solution while deploying the solution.
One of the blogs suggested that the checkbox beside 'Trustworthy Database' should be checked. But i dont see any checkbase in the database tab of the Project properties.
I am using VS2008 and trying to add an Image to a report (RDLC). The documentation suggests the properties window for the Image field will have a Source and a Value field. I cannot see them. Elswhere, the documentation talks about an Image Wizard. I cannot find that either.
I have added an Image to the Report's Embedded Images list. How do I add an image to my RDLC?
someone please tell me how im using primavera V5.0 (www.primavera.com) and i want to export the data from the .net to primavera and versa versa please tell me soon
I already have SQL Server Express 2005 installed from having Visual Studio 2005 installed. How can I tell if it is the SP2 edition? It probably isn't, so my next question is what is going to happen when I install Visual Studio 2008, which I will be doing in a day or two...will the install overwrite SQL Server Express 2005 with the latest edition to SP2, assuming that the latest edition will be on the Visual Studio 2008 installation discs? I have not yet used SQL Server Express, so my knowledge level with it is very weak. What I'm hoping to find out with this question is what I'll have (with respect to SQL Server Express) and the install of Visual Studio 2008. I can't even figure out how to tell what version of SQL Server Express that I now have.
It appears Microsoft has bundled SQL Server Compact Edition 3.5 SDK for C/C++ development as part of Visual Studio 2008 and is NOT available for download as an independent entity (as 3.1 SDK is).
I am thinking about installing dvd microsoft office ultimate 2007 visio before I install sql server 2005 sp2. I already have visual studio 2008 rtm pro professional vl on my vista computer. Will I have any issues doing this? Thank you
I've followed the steps in http://www.sqlteam.com/article/debugging-stored-procedures-in-visual-studio-2005 & in the MSDN for configuring and setting up debugging SQL 2005 stored procedures in VS 2008 (seems to be the same as in VS 2005). Everything works fine until I Step Into the Stored Procedure. Everything says that a yellow arrow will appear on the left and I can start going line by line. I never get the yellow arrow.
If I set a breakpoint, it is automatically disabled. The pop-up warning says, "The breakpoint will not currently be hit. Unable to bind SQL breakpoint at this time. Object containing the breakpoint not loaded." I can't find anything about this message or problem on Microsoft's site or on the web. Any assistance is appreciated.
P.S. I'm running VS 2008 Professional Edition Version 9.0.2.1022.8 RTM
I have an application built using VS 2008 (3.5 fx). I build a series of reports (using VS 2005 (sigh)) and am now tryiing to render them using a Windows form and the ReportViewer control in the VS 2008 app. However I always get the error message "The source of the report definition has not been specified" when I execute the line
m_reportViewer.RefreshReport();
When I try to view the very same report in a VS 2005 app it renders without error. I can also view the report using Report Manager and preview it in the VS 2005 app I use to build it. Any suggestions?
Thx
Helen -- Helen Warn, PhD Agile Software Inc. www.agile-soft.com
I receive the following error when trying to add a local database to my project.
"The data provider required to connect to the local data file could not found. The file will be added to the project but the typed DataSet associated with the file will not be generated."
I've reinstalled VS2k8, SQL Compact 3.1 and SQL Compact 3.5 on my machine and still receive the error.
Does anyone have any suggestions? I saw another similar thread about this in the VB2k8Express forum, but there were no helpful answers there. (for the curious: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2769854&SiteID=1)
I haven't used the SSCE before and so it's possible I've mistakenly omitted some required items.
I have a couple of questions which is better for commercial development the standard edition sql or sql express edition? Does the express edition 2005 in visual studio professional come with advanced services or do you have install sp2? Has anyone installed sql 2005 reporting services on vista ultimate is there anything I should know besides the article How to install sql reporting services on a windows vista computer? Thanks I have sql express on my visual studio 2008, however I have not installed it. Will this be a problem if I install standard ediion?
I use visual studio 2008 to design a database application. I am in the peak of finalising the program but I have a snag with updating data in the database. I could create new rows, add rows and new rows of data to the table but whenever i try to change the data in a cell it returns an error "Update requires a valid UpdateCommand when passed DataRow collection with modified rows." I have tried all possible solutions, using table adapter, commands etc but wont get it.
This situation also applies to changes made directly on the data grid and also when using the binding navigator buttons to edit and save data.
I have a framework 2.0 winforms application that uses the data mining viewer controls. I upgraded the project to visual studio 2008 and compiled it under framework 2.0. It compiles fine, but when the form with the TimeSeriesViewer control loads, the application throws the following exception:
System.Reflection.TargetInvocationException was unhandled by user code Message="Unable to get the window handle for the 'AxChartSpace' control. Windowless ActiveX controls are not supported." Source="System.Windows.Forms" StackTrace: at System.Windows.Forms.AxHost.InPlaceActivate() at System.Windows.Forms.AxHost.TransitionUpTo(Int32 state) at System.Windows.Forms.AxHost.CreateHandle() at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible) at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible) at System.Windows.Forms.AxHost.EndInit() at Microsoft.AnalysisServices.Viewers.TimeSeriesViewer.InitializeComponent() at Microsoft.AnalysisServices.Viewers.TimeSeriesViewer..ctor() at RMS2.UI.DecisionSupport.ShowModel(String modelName, Int32 tabIndex) in C:UsersDougDocumentsRmsIIRmsIIRMS2.UIDecisionSupport.cs:line 72 at RMS2.UI.DecisionSupport.DecisionSupport_Load(Object sender, EventArgs e) in C:UsersDougDocumentsRmsIIRmsIIRMS2.UIDecisionSupport.cs:line 42 at System.Windows.Forms.Form.OnLoad(EventArgs e) at System.Windows.Forms.Form.OnCreateControl() at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible) at System.Windows.Forms.Control.CreateControl() at System.Windows.Forms.Control.WmShowWindow(Message& m) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ScrollableControl.WndProc(Message& m) at System.Windows.Forms.ContainerControl.WndProc(Message& m) at System.Windows.Forms.Form.WmShowWindow(Message& m) at System.Windows.Forms.Form.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) InnerException: System.AccessViolationException Message="Attempted to read or write protected memory. This is often an indication that other memory is corrupt." Source="System.Windows.Forms" StackTrace: at System.Windows.Forms.UnsafeNativeMethods.IOleObject.DoVerb(Int32 iVerb, IntPtr lpmsg, IOleClientSite pActiveSite, Int32 lindex, IntPtr hwndParent, COMRECT lprcPosRect) at System.Windows.Forms.AxHost.DoVerb(Int32 verb) at System.Windows.Forms.AxHost.InPlaceActivate() InnerException:
The control is being added programatically, as in the wiinforms samples. Can anyone suggest a workaround? Thank you in advance.
I installed both SQL 2005 developer and SQL Server 2005 Express Edition with Advanced Services SP2 and Microsoft SQL Server 2005 Express Edition Toolkit.
In every version "SQL Server Business Intelligence Development Studio" was missing. I uninstalled and reinstalled both version but always "SQL Server Business Intelligence Development Studio" was not available and the computer could not find devenv.exe file.
I installed visual studio 2008 as well. For some reason the start menu link for "SQL Server Business Intelligence Development Studio" is ""C:Program FilesMicrosoft Visual Studio 8Common7IDEdevenv.exe"" and devenv.exe is not there or anywhere
I want to export file such as .csv, xml , word from ReportViewer in visual studio 2008 but when I run on ASP.NET .net framework 2.0, it can export only excel & pdf files. But in business intelligent project in Visual Studio 2005 I can export all files that I want. How can I export file from reportviewer in visual studio 2008 run on web application?
I am trying to send a variable selected by the user and have all of the results that match that selection show in a datagridview. I tried using this query but it gives me not result. //code SELECT wasteDate, wasteFeed, wasteLbs FROM tbWaste WHERE (wasteDate = 'date1') //code date1 is being set by a datetimepicker I am getting no results when I run the program I have tried out every different combination of ways of coding it i can think of if anyone can help it would be greatly appriciated.
I am having a problem developing a SSIS package in Visual Studio and SQL Server 2005 Enterprise Edition.
Validation is happening after I have set ValidateExternalMetadata = FALSE causing and error
My package writes to a SQL Server table with a handfull of rows and columns using OLE DB destination.
One of the columns in the table is a 'NOT NULL' data type.
I have a trigger on the table handling any null condition. (see below)
(I know the trigger works because I have tested it by inserting rows manualy within SQL Server Mgnt Studio)
When I €œExecute Package€? (DEBUG) my data flows through till the OLE DB destination, which turns red, errors out, and does not attempt to write the data !!! !!!
Ideas, suggestions ??
My next step is to develop a work around so that Visual Studio and SQL Server 2005 Enterprise Edition SSIS will write the data and not error out.
Thanks
Trigger: CREATE TRIGGER [dbo].[dim_ins] ON [dbo].[rollup_dim] AFTER INSERT AS BEGIN update rollup_dim set str_link_id = str_id where str_link_id is null; END
I have a personal project that performances analytics on a SQL Server (express) Db thru SSMS. I connect via an ODBC to SQL Server and create Access 2013 queries and reports of web traffic to my Web portal. The source data is from Google Analytics of various webpages, which I import to SQL Server and link to the Access Db.
I wanted to automate some of the manual extractions thru SSIS with a package that would pull in the Xcel sheets from SQL Server (or even Access). I started SQL Data Tools (SSDT) and here is my problem. When I attempt to open Package.dtsx I have an error that indicates SSDT must be installed on one of several SQL Server installation. Mine is Evaluation which I have and SSDT is installed in it.
I used SSDT to open Visual Studio 2010 and then it indicates I must have SSDT in SQL Server 2012.
Apparently I have to run SQL Server Setup and install SSDT in it. But, I don't have a setup of this type. Or at least I have not found it by searching my Windows 8.1 machine. This seems like a very elementary problem that can be fixed by a MSDN download or some pointer to where I need to go to install SSDT within SQL Server 2012.
in visual studio web developer express edition 2008 i added a new item this was a sql server database which i called test2. I added a table called comments, and the fields name, email, comments, IPAddress, and Date and in my comments.aspx page i added a name textbox, a texbox for email, a textbox for comments and the submit button i double clicked on the submit button and added the following code Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click Dim mydS As New SqlDataSource mydS.ConnectionString = ConfigurationManager.ConnectionStrings("testConnectionString1").ToString mydS.InsertCommandType = SqlDataSourceCommandType.Text mydS.InsertCommand = "INSERT INTO comments(Name,Email,Comments,IPAddress,Date) VALUES (@Name,@Email,@Comments,@IPAddress,@Date)" mydS.InsertParameters.Add("Name", TextBox1.Text) mydS.InsertParameters.Add("Email", TextBox2.Text) mydS.InsertParameters.Add("Comments", TextBox3.Text) mydS.InsertParameters.Add("Date", Date.Now) mydS.InsertParameters.Add("IPAddress", Request.Params("REMOTE_ADDR")) Dim rowsaffected As Int16 = 0 Try rowsaffected = mydS.Insert Catch ex As Exception Server.Transfer("errors.aspx") Finally mydS = Nothing End Try If rowsaffected <> 1 Then Server.Transfer("errors.aspx") Else Server.Transfer("confirm.aspx") End If End Sub Protected Sub TextBox1_TextChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles TextBox1.TextChanged End Sub but when i run it it gives me a problem with this line mydS.ConnectionString = ConfigurationManager.ConnectionStrings("testConnectionString2).ToString and says something abt unidentified object and I want to know how do i set the connection string or alternatively where?????? and my table does not update with the corresponding values i enter on the webpage. i also changed the authentication mode to forms instead of windows as i was advised but i'm still having a problem
I am working on a SSIS solution that has 4 packages. All 4 have run before and I have not modified any of them, however I keep getting the error message and it keeps locking up on one of my packages. Does anyone have any advice or a remedy for this?
When I push my SSIS packages up to my production server (which has a different data source than my developement environment) and I try to open the package on the production server, it takes forever for to validate all the steps of the SSIS package because it's trying to validate against a datasource that isnt there, so it just waits for each element it's validating to time out. This is exceptionally annoying.
Is there a way to turn off this validation 'feature'?
What does this mean? I am building a package with a datareader task, derived column task, data conversion task, ans several ole db destinations.
Unable to cast COM object of type 'System.__ComObject' to interface type 'Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSCustomProperty90'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{5A78E6D8-6AE0-4D2B-81C1-4B990840B717}' failed due to the following error: The application called an interface that was marshalled for a different thread. (Exception from HRESULT: 0x8001010E (RPC_E_WRONG_THREAD)).
