Hi,
We have a problem with visual studio. It hangs when i use the "execute package" option. New packages are running correctly but the packages which i've already built are not executing anymore...Any ideas to get things on track again?
Gr,
Hennie
When I push my SSIS packages up to my production server (which has a different data source than my developement environment) and I try to open the package on the production server, it takes forever for to validate all the steps of the SSIS package because it's trying to validate against a datasource that isnt there, so it just waits for each element it's validating to time out. This is exceptionally annoying.
Is there a way to turn off this validation 'feature'?
I've built an SSIS package in SSDT 2014. The package was running successfully
When I close and open the package it hangs on validation of single task out of all.
OLEDB DESTINATION Task
I have tried several times to close the SSDT and open but facing same issue.
These seems like bugs in SSIS/SSDT. What would cause the relocation of some script code to hang the validation process like this?
Hi,
when I run the following from the command prompt I am getting an error saying that can not set the variable Status as int.
dtexec /File "C:workSSIS PackagesDataflowControlRoom.dtsx" /SET
Package.Variables[ChannelCode].Value;"test" /SET
Package.Variables[Status].Value;1
both variables as you can see are in the top level.
the problem is that ChannelCode is string but Status is Integer.
if I take out the /SET Package.Variables[Status].Value;1 part from the command line it will work fine. I think th eproblem is down to diffenrt types of variable as there are two types of String and Interger.
any ideas on what the problem migth be.
p.s. I am runnning SQL server 2005 Dev edition (without any SP)
Cheers
I created a package and stored in SQL server.
I am running it as follows
master.dbo.xp_cmdshell dtexec /sq "ABC DEF GHI" /ser "Prod"
ABC DEF GHI --> is my package name.
When i run this from a job, it runs without error
but when i run the above sql i am getting error as
Msg 102, Level 15, State 1, Line 2
Incorrect syntax near '/'.
Am i missing some thing, please advice. Is that the problem between spaces in the package name?
Hi All,
I developed my package in BI studio and tested runnning it through BI. Now when i have to deploy the package to main server it will be executed via batch job. This package requires an input file name too.
Now when i am trying to run the package on my loacal box using following command on command prormpt i get error given below.
COMMAND USED BY ME: DTExec /FILE 'C:ProjectIntegrationServicesSFRIntegrationServicesinpkgSFRLocation.dtsx' /SET Package.Variables[InputParamFileName].Value;'C:DataDumpInputLOC00022'
ERROR MESSAGE:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 1:29:54 PM
Error: 2008-02-22 13:29:54.96
Code: 0xC0011007
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Unable to load the package as XML because of package does not ha
ve a valid XML format. A specific XML parser error will be posted.
End Error
Error: 2008-02-22 13:29:54.96
Code: 0xC0011002
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Failed to open package file "'C:ProjectIntegrationServicesSFR
IntegrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The speci
fied path is invalid.". This happens when loading a package and the file cannot
be opened or loaded correctly into the XML document. This can be the result of
either providing an incorrect file name was specified when calling LoadPackage o
r the XML file was specified and has an incorrect format.
End Error
Could not load package "'C:ProjectIntegrationServicesSFRIntegrationServices
inpkgSFRLocation.dtsx'" because of error 0xC0011002.
Description: Failed to open package file "'C:ProjectIntegrationServicesSFRInt
egrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The specifie
d path is invalid.". This happens when loading a package and the file cannot be
opened or loaded correctly into the XML document. This can be the result of eit
her providing an incorrect file name was specified when calling LoadPackage or t
he XML file was specified and has an incorrect format.
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Started: 1:29:54 PM
Finished: 1:29:54 PM
Elapsed: 0.047 seconds
PLease let me know solution to creating batch job for executing this pkg with input param.
I have a package that executes fine in BIDS. However, when calling it using xp_cmdshell it cannot find the path to the source flat file. Anyone have any suggestions?
Here is the statement:
xp_cmdshell 'dtexec /SQ NatlAcctsImport /SER CR1-SQL-01 /CONN SourceConnectionFlatFile;Q:BINATNLACCTS'
Here is the result:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
NULL
Started: 9:50:56 AM
Progress: 2006-02-10 09:50:57.40
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-02-10 09:50:57.40
Source: Data Flow Task
Validating: 50% complete
End Progress
Progress: 2006-02-10 09:50:57.42
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Validating: 50% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Prepare for Execute: 0% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Prepare for Execute: 50% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Prepare for Execute: 100% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Pre-Execute: 0% complete
End Progress
Warning: 2006-02-10 09:50:57.43
Code: 0x80070003
Source: Data Flow Task Source - NATNLACCTS [1]
Description: The system cannot find the path specified.
End Warning
Error: 2006-02-10 09:50:57.43
Code: 0xC020200E
Source: Data Flow Task Source - NATNLACCTS [1]
Description: Cannot open the datafile "Q:BINATNLACCTS".
End Error
Error: 2006-02-10 09:50:57.43
Code: 0xC004701A
Source: Data Flow Task DTS.Pipeline
Description: component "Source - NATNLACCTS" (1) failed the pre-execute phase and returned error code 0xC020200E.
End Error
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Pre-Execute: 50% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Cleanup: 0% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Cleanup: 50% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Cleanup: 100% complete
End Progress
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 9:50:56 AM
Finished: 9:50:57 AM
Elapsed: 0.985 seconds
NULL
I am unable to debug code from a SQL Database Project using the CLR. After VS 2005 does the auto-attaching to the SQL server, VS hangs until I tell it to stop debugging. Many others have reported this as a similar problem, however this only seems to affect me when I€™m connecting to specific servers. Specifically it seems to be remote connections. When I attempt to connect to my SQL 2005 Developer Edition €ślocally€? I get right through and can debug.
From my VS output window:
Auto-attach to process '[1688] [SQL] gx620-eric' on machine 'gx620-eric' succeeded.
Debugging script from project script file.
testing
No rows affected.
(0 row(s) returned)
Finished running sp_executesql.
The thread 'gx620-eric [59]' (0x1730) has exited with code 0 (0x0).
The thread 'gx620-eric [59]' (0x1730) has exited with code 0 (0x0).
The thread 'gx620-eric [59]' (0x1730) has exited with code 0 (0x0).
The thread 'gx620-eric [59]' (0x1730) has exited with code 0 (0x0).
The program '[1688] [SQL] gx620-eric: gx620-eric' has exited with code 0 (0x0).
When I attempt to connect to a remote server running Enterprise Edition, it hangs after a successful attach.
Auto-attach to process '[1856] [SQL] virtual2003eric' on machine 'virtual2003eric' succeeded.
Sometimes after countless attempts, I am able to get this to work, but lately I have had no success. As far as the SQL Server side, enabling and disabling the CLR through the Surface Area Configuration seems to be the only place to do anything relative to the CLR inside SQL server.
I have firewalls disabled. All SQL Servers presently have both SQL 2005 SP2 and Visual Studio 2005 SP1 installed.
I€™ve tried restarting servers and services, checking and un-checking €śAllow SQL/CLR Debugging€? and those steps did not work for me.
Does anyone have any insight on this one? Any ideas on how I can further debug this one?
Thanks.
Eric
Hi
I have around 160 packages in SSIS. When i run these packages, after some times the errror comes that the system is low on virtual memory and then visual studio freezes. I have a machine with 1G memory. All these packages are not running parallely but they have some dependencies defined on them.
Please let me know if theres some way to configure it correctly,
Thanks,
Vipul
When creating a report using reporting Services with a cube as a datasource, visual studio 2005 hangs. I have applied SP1 to visual studio.net 2005 .
This is the query generated by query designer in reporting services. When I try to drag and drop another dimension to slice it by , visual studio hangs.
The fact table has just 10,000 records. Are the number of dimensions used to slice the cube too many? How do I optimize this query?
SELECT NON EMPTY { [Measures].[Avg MT Rate - Speech], [Measures].[Change in Avg MT Rate], [Measures].[Edited Lines Per 1000], [Measures].[Speech Utilization], [Measures].[Time Saved %], [Measures].[Speech Edited for Rev 1], [Measures].[Change in Account Productivity], [Measures].[Hours Saved], [Measures].[Lines Per 1000], [Measures].[Average MT Rate - Total Production], [Measures].[Typed Lines], [Measures].[Productivity Time in hours - Edited Docs],[Measures].[Productivity Time in Hours - Typed Docs],[Measures].[Productivity Time in Hours]} ON COLUMNS, NON EMPTY { ([Dim Customer].[Customer Name].[Customer Name].ALLMEMBERS * [Dim Customer].[Dictator Site Name].[Dictator Site Name].ALLMEMBERS * [Dim Date].[The Month].[The Month].ALLMEMBERS * [Dim Date].[The Year].[The Year].ALLMEMBERS * [Dim MT].[Creator Last Name].[Creator Last Name].ALLMEMBERS * [Dim MT].[Creator First Name].[Creator First Name].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM ( SELECT ( STRTOMEMBER(@FromDimDateTheYear, CONSTRAINED) : STRTOMEMBER(@ToDimDateTheYear, CONSTRAINED) ) ON COLUMNS FROM ( SELECT ( STRTOMEMBER(@FromDimDateTheMonth, CONSTRAINED) : STRTOMEMBER(@ToDimDateTheMonth, CONSTRAINED) ) ON COLUMNS FROM [ETL DW])) CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
I created several packages (MyProjectPart1 - MyProjectPart9) which I execute on the server directly(right-click package in integration services and execute). These packages alI deployed the server with logging and configuration files. Before deploying I edited the configuration file (changed all dependent file names and sql server name from default on my workstation to those unique to the server I'm deploying it to) and then ran the manifest file which pushed it onto the server. I then ran the packages from the server an it ran beautifully. I then tried to build a package which executes all the packages in the correct order (by adding 9 execute package tasks). The dependen files are on the E: emp folder on the server.
I have included the error messg...but it looks like it's looking for dependent drives on the C drive on my workstation. I don't get this? How do I supply configuration files? Why is it executing differently when I call it from package execute task and when I execute it on SQL Server
SSIS package "RUN_MY_PACKAGES_ONSERVER.dtsx" starting.
Information: 0x40016041 at ProjectInfo_NET_SSISA: The package is attempting to configure from the XML file "C:TempMyProjectPart1-03-2007-MyProjectPart1.dtsConfig ".
Error: 0xC001404B at MyProjectPart1, Log provider "SSIS log provider for Text files": The SSIS logging provider has failed to open the log. Error code: 0x80070015.
The device is not ready.
Error: 0xC001404B at MyProjectPart1, Log provider "SSIS log provider for Text files": The SSIS logging provider has failed to open the log. Error code: 0x80070015.
The device is not ready.
Error: 0xC001404B at MyProjectPart1, Log provider "SSIS log provider for Text files": The SSIS logging provider has failed to open the log. Error code: 0x80070015.
The device is not ready.
Error: 0xC002F304 at Drop Unecessary Tables, Execute SQL Task: An error occurred with the following error message: "The device is not ready.
".
Task failed: Drop Unecessary Tables
Warning: 0x80019002 at MyProjectPart1: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Task failed: Execute Package Task MyProjectPart1
Warning: 0x80019002 at RUN_MY_PACKAGES_ONSERVER: The Execution method succeeded, but the number of errors raised (4) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "RUN_MY_PACKAGES_ONSERVER.dtsx" finished: Failure.
Hi! Good Day!
I am executing a DTS PAckage from Visual Basic. My code is this:
objPackage.LoadFromSQLServer "SERVER", , , _
DTSSQLStgFlag_UseTrustedConnection, , , , "DTSPackage1"
objPackage.Execute
objPackage.LoadFromSQLServer "SERVER", , , _
DTSSQLStgFlag_UseTrustedConnection, , , , "DTSPackage2"
objPackage.Execute
The first DTS package was executed successfully, but when it hit the second package, an error occurs:
Step 'DTSStep_DTSDataPumpTask_1' already exists in the collection.
Please help.
Thanks.
Hi all,
I am creating a dts package to export files from one database to another database.
I tried to search for ways to execute the files and found out that i need to add
reference to Microsoft.Sql.managedDts. However, I cannot find this reference from
my reference. Do i have other alternatives to run this file?
Hi all,
Have tried running a dts package but Im unable to add the reference Microsoft.Sql.managedDts.
Is there any other way that i can do tat from Visual studio code behind page? I need to let the user to
trigger the package from the web application. Thks in advance.
Wei
All:
I am working with a package that executes a stored procedure. This stored procedure makes use of a Linked Server. When I execute it in debug mode in VS 2005, it works flawlessly. However when I deploy it to the production server and execute it by going to Management Studio, connecting to Integration Services, navigating to MSDB, right clicking and choosing "run package" I get the infamous:
Login failed for user '(null)'. Not associated with a trusted SQL Server Connection. OLE DB Provider SQLNCLI for linked server [name] returned message "Communication Link Failer"
error. If I execute the stored procedure by itself on the production server, it works flawlessly. It is only when this stored procedure gets executed via the above mentioned way inside of an SSIS pack that I get this error. To me this suggest it is being executed as a different user, but I don't know which one.
Any help would be wonderful.
Thank you in advance...
AccDev
I have three very simliar packages that I edited. I added an Exec SQL Task to truncate a table. These packages are not large or complex. When I simply try to open two out of the three packages, Visual Studio hangs and I get the balloon saying it's busy. I see in the bottom left hand corner, "Validating Load Phase". This never changes. My question is how can I get into this package? I hadn't yet checked it into SourceSafe If I even attempt to single click on any step in the package, it will hang. I've also had a co-worker attempt to open the packages on his computer, and he gets the same thing, so it's definitely the SSIS package. Any help would be appreciated!
View 9 Replies View RelatedHi all,
I have a serious problem with my SSIS Package while executing using 32-bit DTExec and 64-bit DTExec.
Here are the details:
Environment:
Windows Server 2003 64-bit (Build 3790: Service Pack 2)
SSIS 32-bit & 64-bit installed
SQL Server 2005 (Microsoft SQL Server 2005 - 9.00.1399.06 (X64) - RTM)
SSIS Package details (compiled in 64 bit)
Script tasks only
Microsoft Visual Basic .NET (using TRY...CATCH block)
PreCompileScriptIntoBinaryCode = TRUE
Run64BitRunTime = TRUE
Execution
Batch file that uses DTExec to execute the Package.
SCENARIO
I am trying to exeucte the above SSIS package using both 32-bit and 64-bit DTExec to make it failure by providing invalid connection string. Here are the details,
Wrong connection String using 32-bit Execution
While establishing the connection the error message has been nicely captured in to my Exception block and writes into the log file.
Wrong connection String using 64-bit Execution
While establishing the connection the error has not been catpured anywhere (although I have TRY CATCH block) and it haults there itself with the message "Process is terminated due to StackOverflowException". Later I found that the error is due to the connection string along with the unhandled exception.
Please suggest any one of the following my findings, also if you have any other advice would be very much appreciated.
1. Shall I go ahead and fix the issue by handling those unhandled errors? (e.g Appdomain, application). I tried several but still not working using 64-bit DTExec.
2. Shall I go ahead and use 32-bit DTExec to execute the package? If so, is there any other major issue...like performance or anyother bug?
P.S: We cannot apply any service pack for SQL Server 2005 at the moment. Sorry abt it. If you have any specific hotfix for DTExec (without affecting SQL Server) then we can decide.
Sorry for the lengthy one and Thanks very much for you help in advance .
Thanks again!
Suresh
I have noticed a strange behaviour when running some of my packages with dtexec. The packages use EventHandlers to log information to a database using the Execute SQL Task with the query stored in a variable. This variable is further part of the package configuration, so that I can change the query without changing the package itself. Now, this all works fine, until I made a typo in the query causing the syntax to be invalid, ie changing SELECT to SELCET. Now, one would expect the package to fail, and it does, if I run it through the debugger in Visual Studio, but when I run it using dtexec it just hangs and I have to kill the process using the Task Manager.
Peculiarly, I tried doing the same thing with a task that was not contained in an EventHandler, and then the package fails as expected, both when running it in the debugger and using dtexec. This is not a major problem, but what I am afraid of is that one day the database server will be down and cause an error in the Execute SQL Task in the EventHandler, causing dtexec to hang indefinitely. Has anyone else had problems like these?
Regards,
Lars
I'm in a SSIS Package Design tab working on a data flow. It was working fine up to now, but all of a sudden I keep getting this error that says, "Microsoft Visual Studio has encountered a problem and needs to close." And it has that "Send Error Report" and "Don't Send" button at the bottom. This started happening when I tried to add a Data Viewer on a Data Flow Path. And now every time I do this to try to debug my data flow, it gives me this message and closes my project.
However, the package executes without any package errors, but I as I described above, I can't add a Data Viewer because it keeps giving me this message and closing my package.
What does this mean? I am building a package with a datareader task, derived column task, data conversion task, ans several ole db destinations.
Unable to cast COM object of type 'System.__ComObject' to interface type 'Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSCustomProperty90'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{5A78E6D8-6AE0-4D2B-81C1-4B990840B717}' failed due to the following error: The application called an interface that was marshalled for a different thread. (Exception from HRESULT: 0x8001010E (RPC_E_WRONG_THREAD)).
I created a package via the import wizard in SQL Server Management Studio. When I test-ran the package I realised it needed to be modified. How do I do this without using either Visual Studio, SSIS Designer or an XML editor, none of which is installed where the package was created? Ideally I want to hear that there's a way of redisplaying the package in the import wizard.
View 1 Replies View RelatedI have a script that changes the name of a file after a data upload. The script works fine if I execute the package in Visual Studio but when I run the file package from a SQL server job it does not rename the file. The data does get uploaded it just does not run the final script.
Any help would be appreciated.
Steve
I have a package that I was able to edit a week before. But now it is consuming all CPU memory (100%) and not letting me to edit the package (When I try to edit that it says Visual Studio Is busy even after an hour waiting).
Even though I have not changed anything, the package is behaving like this.
I would appreciate any reply on this?
Thanks in advance
I have recently applied SQL Server 2005 SP1 to a dev machine, and my workstation, where it rpesumably updated Visual Studio. Since then I cannot open an SSIS package that contains some encrypted data, due to storing a database password. I get various error messages, and Visual Studio reports that it cannot load the package - I never get prompted for the password. My colleague who has not applied SP1 yet has no problem. Has anyone else encountered this problem, and if so do they have a solution ?
Errors below:
Error 1 Error loading 'Dim_Staff.dtsx' : The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails. . A:DevelopmentVisual Studio 2005Production_DeploymentSSIS_PackagesSales_DimensionsDim_Staff.dtsx 1 1
Error 2 Error loading Dim_Staff.dtsx: Failed to decrypt an encrypted XML node because the password was not specified or not correct. Package load will attempt to continue without the encrypted information. C:Dim_Staff.dtsx 1 1
Error 3 Error loading Dim_Staff.dtsx: Error loading value "<DTS:VariableValue xmlns:DTS="www.microsoft.com/SqlServer/Dts" DTS:DataType="7">12:00:00 a.m.</DTS:VariableValue>" from node "DTS:VariableValue". C:Dim_Staff.dtsx 1 1
Error 4 Error loading Dim_Staff.dtsx: Error loading value "<DTS:Variable xmlns:DTS="www.microsoft.com/SqlServer/Dts"><DTS:Property DTS:Name="Expression"></DTS:Property><DTS:Property DTS:Name="EvaluateAsExpression">0</DTS:Property><DTS:Property DTS:Name="Namespace">User</DTS:Property><DTS:Property DTS:Name="ReadOnl" from node "DTS:Variable". C:Dim_Staff.dtsx 1 1
Error 5 Error loading 'Dim_Staff.dtsx' : The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails. . C:Dim_Staff.dtsx 1 1
How to execute SSIS package inside of Visual Studio?
I have opened the file, but do not see any way to execute it. Please advise. Thanks
I created a package but someone else will be running it every day. When this person opens the project in Business Intelligence Studio they get build errors such as the following:
Error loading PackageName: Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state."
You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
this problem is described in the article below however the only advice they offer is to "change the value of the ProtectionLevel property " however they don't specify what to change the value to. I have tried every option but it still does not work. And having them enter in a password every time is out of the question.
http://support.microsoft.com/default.aspx?scid=kb;en-us;904800
It seems there is no way for someone other than the package owner to run the package! Running them from the sql server is not an option since we don't have permission to do so. As far as I know BIS is the only way.
I have an SSIS package that when run from Visual Studio takes 1 minute or less to complete. When I schedule this package to run as a SQL Server job it takes 5+ and sometimes hangs complaining about buffers.
The server is a 4 way 3ghz Xeon (dual core) with 8GB ram and this was the only package running.
When I look in the log I see that the package is running and processing data, although very very very very very slowly.
Has anyone else experienced this?
Thanks for your help
Marcus
Visual Studio runs out of memory when trying to use SSIS package. I am trying to create and run a SSIS package that validates and imports some large xml files >200MB. Validation fails because Visual studio cannot open large files without running out of memory.
The SSIS package throws this error when I run the package..at the validation task.
Error: 0xC002F304 at Validate bio_fixed, XML Task: An error occurred with the following error message: "Exception of type 'System.OutOfMemoryException' was thrown.".
How do I increase the amount of RAM that VIsual Studio can use...I have plenty of RAM on my workstation >3GB, but VS chokes maybe around 100MB files?
Thanks,
Forrest
Hello
When running a package in VS you can see something like this in the output window:
SSIS package "logging.dtsx" starting.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Data Flow Task, Flat File Source [1]: The processing of file "C: est ssis loggingad_data1.txt" has started.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Warning: 0x8020200F at Data Flow Task, Flat File Source [1]: There is a partial row at the end of the file.
Information: 0x402090DE at Data Flow Task, Flat File Source [1]: The total number of data rows processed for file "C: est ssis loggingad_data1.txt" is 477.
Information: 0x402090DF at Data Flow Task, OLE DB Destination [1011]: The final commit for the data insertion has started.
Information: 0x402090E0 at Data Flow Task, OLE DB Destination [1011]: The final commit for the data insertion has ended.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Data Flow Task, Flat File Source [1]: The processing of file "C: est ssis loggingad_data1.txt" has ended.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "DataReaderDest" (87)" wrote 0 rows.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "OLE DB Destination" (1011)" wrote 1 rows.
SSIS package "logging.dtsx" finished: Success.
This is exactly when I need when a package is running but I want to be able to see it without using Visual Studio.
I would do it in Reporting Services but I need to find out to get the information. The SSIS logging feature in a package does not provide that kind of info.
Did someone try this already?
Thanks!
Mop
I ask because I'm still looking for the source of interface problems I have in using the SSIS designer.
View 4 Replies View RelatedOur project is on SSIS 2012 and we are using the project deployment model. We have parameter the connection managers, created environments, environment variables and configured the references. Hence, when we deploy the solution to higher environments, the connection strings are picked from the environments and not the ones stored in the connection manager.
However, we face issues when in development environment, we need to run the same package but by entering the values manually in the connection manager. Even though the connection details are correct, when we execute the package from Visual Studio, SSIS is not able to connect to the database. Is there any way to have SSIS prompt for the connection details after we have click on "Execute Task" or "Start" from Visual Studio?Â
Hi,
I have a web application using Stored Procedure (SP). I see that there's a SP taking long time to execute. I try to capture it by Profiler Tool, and find out that with the same SP on the same db with the same parameter. The duration of executing by my web app is far bigger than the duration of executing on SQl server management studio - query window
Please see the image through this url http://kyxao.net/127/ExecutionProblem.png
Any ideas for this issue?
Thanks a lot
Hi,I have a web application using Stored Procedure (SP). I see that there's a SP taking long time to execute. I try to capture it by Profiler Tool, and find out that with the same SP on the same db with the same parameter. The duration of executing by my web app is far bigger than the duration of executing on SQl server management studio - query windowPlease see the image attached http://kyxao.net/127/ExecutionProblem.png Any ideas for this issue?Thanks a lot Jalijack
View 2 Replies View Related