Visual Studio Interface EXTREMELY Slow

Apr 7, 2006



Hi folks,

I'm working within VS2005/Business Intel studio environment. I've got one master package, which loads about 18 sub-packages as tasks.

After openin the master package (and waiting 5-10 minutes for the packages to open and validate), maneuvering within the IDE is nearly impossible, it is so slow. Context menus can take 30 seconds to open. Certian operations, like closing a window, seem to hang the environment.



Does anyone have any feedback about this kind of ide performance problem?



Thanks, Scott

View 10 Replies


ADVERTISEMENT

SQL Server Management Studio Run Extremely Slow On Server.

Mar 21, 2007

I had installed SQL 2005 in my server (very high spec server).

but i wonder why every time i launch the management studio, it tooks forever to load... about 5 minutes.

When i right click on a table and click on view properties, it can takes up to 5 minutes to display the detail.

Is there any setting / configuration that i configured wrongly?

View 4 Replies View Related

Visual Studio Is Slow

Jan 8, 2008

Hi,

I am not sure whether this questions goes here.

I have lot of packages stored in my hard disk and i am creating some more. Now my machine gets very slow only if i open these packages in visual studio. When i check the CPU usage by that time it is not even 2%. If i try to navigate between data flows. I get message "Microsoft Visula studio is doing some internal operations and if you are getting this message in normal usage repor this to Microsoft". Is this the issue in my visual studio installation or some thing else.

I also reinstalled all the software 3 weeks back and it was working good till yesterday again the the problem started yesterday.

View 14 Replies View Related

Visual Studio Running Too Slow

Jan 27, 2006

Hi friends
after working visual studio (on my report model project) few minutes it runs too slow. i mean clicking on entities ,attributes takes ages to finish. I opened task manager i see "devenv.exe" is taking more than 800,000 k !!

am using sql server 2005 standard edition.
have you seen similar problem.
Thanks for your help.

View 19 Replies View Related

SQL CE 3.5 Visual Studio 2008 TOO SLOW

Sep 14, 2007



Hi,

I have a desktop application that uses an Access DB.
Now i have converted it to Visual Studio 2008 and tried the SQL CE Edition.
I wrote all the methods, create the database and the tables on the fly and seems to work really fine.
The database is 20MB big, but the performance is vey bad.
I mean with Access it's very fast, you actually don't see how slow it is, and with the SQL CE now,
it takes 7 seconds !!!! for a few access instead of under 1 second with Access.

I can't imagine that this is normal, there must be something i am really missing in my code.
Looks something like this:




Code Snippet
SqlCeEngine engine = new SqlCeEngine("Data Source = URANO.sdf");
engine.CreateDatabase();
engine.Dispose();
// Verbindung öffnen
sqlConnection = new SqlCeConnection("Data Source = URANO.sdf");
sqlConnection.Open();
// creating the tables here with data
sqlCommand = new SqlCeCommand("SELECT ID FROM Laender WHERE Name=@Name", sqlConnection);
sqlCommand.Parameters.Add("@Name", SqlDbType.NVarChar, 30);
sqlCommand.Parameters[0].Value = land;
sqlDataAdapter = new SqlCeDataAdapter(sqlCommand);
sqlDataSet = new DataSet();
sqlDataAdapter.Fill(sqlDataSet, "Laender");
landID = "" + (((int)sqlDataSet.Tables["Laender"].Rows[0][0]) + 1);






this takes 1 - 2 seconds


btw: the whole class is static and the variables also are static.

Would it be better to load all the database tables into datasets, and only work with the datasets in memory ?
Well i thought that the SQL CE Engine, would load the database into memory and be just fast.
I mean we have 2 GB of memory or 1 the most of us, 20MB isn't that much.

Thanks !

Nick

View 9 Replies View Related

Deploying Assemblies Using Visual Studio Is Slow...

Feb 13, 2007

Hello,

I am using CLR integration to provide all the stored procedures for my project, but the issue I am finding is that deployment of my assembly and it's stored procedures (and two UDTs) is now starting to take so long that I am getting a timeout from SQL Server during deployment (with the default settings of 600 seconds remote connection timeout).

Is there a way to speed-up the deployment process?

I know I could employ a differing strategy of splitting the procedures into multiple assemblies, but I am more concerned that the legth of time used to deploy might indicate some other issues with my server.

By the way, my current assemly contains: 247 Stored Procedures, 7 User Defined Functions, and 2 User Defined Types.

Thanks,

View 3 Replies View Related

Integration Services Designer (Visual Studio) Very Very Slow

Jan 18, 2007

Hi all

I have some performance issues when developing Integration Service Package ...

It is very very slow for example when I try to add new connection in
Connection Manages, it takes about 2 minutes just to open the property window.

On another pc in the same environment it works ok.
In the past I have doing a lot of SSIS Packages ... Is there any cache to empty ??

Thanks for any comments

Best regards
Frank Uray

View 8 Replies View Related

Integration Services Designer (Visual Studio) Is Very Very Slow

Jan 22, 2007

Hi all

I have some performance issues when developing Integration Service Package ...

It is very very slow for example when I try to add new connection in
Connection Manages, it takes about 2 minutes just to open the property window.

On another pc in the same environment (Domain etc.) it works ok.
In the past I have doing a lot of SSIS Packages ... Is there any cache to empty ??

Thanks for any comments

Best regards
Frank Uray

View 1 Replies View Related

Need Help, DTS Is Running Extremely Slow!!!

May 13, 2004

Hi guys.

I have a DTS package ON SQL 2000 which transfer data from AS400 to SQL 2000 using an ODBC Client Access 5.1 (The DSN was configured by a sysdmin on the AS400 so it is configured properly).
When i execute the package manualy (by right click and "execute package") the package runns fine and ruterns data in no time (Eproximatly 30000 rows in 15 sec).

The problem starts when a job executes the same packagee!!!
When i start the job, the DTS package is running Very Very Slow!!!!
sometime it takes Hours to return a few rows! and it seems that it is stuck.

The SQLAgent is running as a NT Account with Administrator rights, and has full access to the AS400!! so the problem is not the Agent.

by monitoring the AS400, i have noticed that the job/DTS is retreaving the first fetch quickly , and then it is in a waiting status

i have tried everything and cant seem to get this problem fixed

Does anyone know what could be the problem?
I Need Help Quick!!!
Thank You

Gil

View 5 Replies View Related

Extremely Slow TSQL

Apr 23, 2008

Hey Guys

I have a huge speed issue on one or two of my SQL Tables. I have included the basic design below.

Structure
Id
ParentId
Name

Group
Id
ParentId
Name
Weight

Products
Id
Name

StructureProducts
StructureId
ProductId
Imported

StructureGroups
StructureId
GroupId

GroupProducts
GroupId
ProductId

AnswerDates
Id
AssessmentDate

Scores <-- This table is the slow table
AnswerDateId
StructureId
GroupId (nullable)
ProductId (nullable)
Score >= 0 && <= 100


Ok, Structures are the start of everything. Structures, have children. If a group/product is Linked to a parent or child structure then that group/product is visible along the structure tree flow path. Groups, like structure have children. And also like structures, if a group is given a product, then that product is visible through the structure tree flow path.

Example:
Earth [Structure]
- Asia [Structure]
--- China [Structure]
--- Japan [Structure]
----- Computer Stuff [Group]
------- Desktops [Group]
------- Servers [Group]
------- Laptops [Group]
--------- HP [Product]
--------- Dell [Product]
--------- Fujitsu [Product]
- Europe [Structure]
--- Germany [Structure]
----- Berlin [Structure]
--- Italy [Structure]
----- Rome [Structure]
----- Venice [Structure]
- America [Structure]
--- United States of America [Structure]
----- New York [Structure]
------- Computer Stuff [Group]
--------- Desktops [Group]
--------- Servers [Group]
--------- Laptops [Group]
----------- HP [Product]
----------- Dell [Product]
------- Home Stuff [Group]
--------- Kitchen Stuff [Group]
--------- bedroom Stuff [Group]
----- Washington [Structure]
------- Computer Stuff [Group]
--------- Desktops [Group]
--------- Servers [Group]
--------- Laptops [Group]
----------- HP [Product]
----------- Dell [Product]
----------- Acer [Product]
------- Home Stuff [Group]
--------- Kitchen Stuff [Group]
--------- bedroom Stuff [Group]
----- Chicago [Structure]
------- Computer Stuff [Group]
--------- Desktops [Group]
--------- Servers [Group]
--------- Laptops [Group]
------- Home Stuff [Group]
--------- Kitchen Stuff [Group]
--------- bedroom Stuff [Group]
- Africa [Structure]
--- South Africa [Structure]
----- Johannesburg [Structure]
------- Computer Stuff [Group]
--------- Desktops [Group]
--------- Servers [Group]
--------- Laptops [Group]
----------- Acer [Product]
------- Home Stuff [Group]
--------- Kitchen Stuff [Group]
--------- bedroom Stuff [Group]
----- Durban [Structure]
----- Capte Town [Structure]
- Australasia [Structure]

So the initial steps that happen (with regards to Scoring) are as follows.
1. Insert root score (which would be for a structure, a group, an answer date and either a product or no product
2. Score the next group up along the treeview, using the scores for the groups at the same level as the original group (0 score if no score exists).
3. Continue this till GroupTree is at root (parentid == null)
4. Using the next structure up along the treeview, repeat steps 2 & 3.
5. Continue steps 4 until Structuree is at root (parentid == null)

Example
Scoring a product for Johannesburg Acer Laptop would go as follows
1. Initial score for [Acer] product against Group [Laptop] for Johannesburg.
2. Calculate Score for all products (productid = null) against Laptop for Johannesburg
3. Calculate Score for [Acer] product against Group [Computer Stuff] for Johannesburg
4. Calculate Score for all products against Group [computer Stuff] for Johannesburg
5. Calculate score for [Acer] product against all root groups for Johannesburg
5.1. Group [Comptuer Stuff] and [Home Stuff]
6. Calculate score for all products against all root groups for Johannesburg
6.1. Group [Comptuer Stuff] and [Home Stuff]
7. Calculate score for [Acer] Product against Group Laptop for South Africa
8. Calculate Score for all products (productid = null) against Laptop for South Africa
9. Calculate Score for [Acer] product against Group [Computer Stuff] for South Africa
10. Calculate Score for all products against Group [computer Stuff] for South Africa
11. Calculate score for [Acer] product against all root groups for South Africa
11.1. Group [Comptuer Stuff] and [Home Stuff]
12. Calculate score for all products against all root groups for South Africa
12.1. Group [Comptuer Stuff] and [Home Stuff]
13. Calculate score for [Acer] Product against Group Laptop for Africa
14. Calculate Score for all products (productid = null) against Laptop for Africa
15. Calculate Score for [Acer] product against Group [Computer Stuff] for Africa
16. Calculate Score for all products against Group [computer Stuff] for Africa
17. Calculate score for [Acer] product against all root groups for Africa
17.1. Group [Comptuer Stuff] and [Home Stuff]
18. Calculate score for all products against all root groups for Africa
18.1. Group [Comptuer Stuff] and [Home Stuff]
etc. etc. etc...

This basicly coveres the concept behind the basic scoring methodology. Now the methodology splits into 2. The first Methodology 1, say it should do these calculations using the Exact same date as the original scored date. (Ie. if i do a score today, only scores on today will be used in the calculations). The other, Methodology 2, says that it should do the calculations on the latest available date. (Ie. If i do a score today, only scores from today and the latest before today will be used in the calculations).

Now to add another problem to this already complex process, is that each Group and each product within a structure can have either of the 2 scoring methodologies assigned to it. Also, products can only be scored against the structures and groups that they are assigned to. Ie, Acer exists in Laptop Group, in Johannesburg or South Africa or Africa, but doesnt exist in New York.

Ok, so now that i've explained briefly how this scoring works, let me get to the heart of the problem. Basicly its speed (can clearly see why), though the speed issue only comes
up in 1 Place. And that is where it has to look backwards for the latest available score for the required group, structure and product.

For this to happen i wrote a function
ALTER FUNCTION [dbo].[GetLatestAnswerDateId]
( @StructureId INT,
@GroupId INT,
@ProductId INT,
@AnswerDateId INT )
RETURNS INT
AS
BEGIN
DECLARE @Id INT
DECLARE @Date DATETIME

SELECT TOP 1 @Date = [Date]
FROM [dbo].[AnswerDate]
WHERE [Id] = ISNULL(@AnswerDateId, [Id])
ORDER BY [Date] DESC

SELECT TOP 1 @Id = ad.id--gs.[AnswerDateId]
FROM [dbo].[Scoring] gs
INNER JOIN [dbo].[AnswerDate] ad ON ad.Id = gs.AnswerDateId
WHERE [StructureId] = @StructureId
AND ISNULL([GroupId], -1) = ISNULL(@GroupId, -1)
AND ISNULL([ProductId], -1) = ISNULL(@ProductId, -1)
AND [Date] <= @Date
ORDER BY [Date] DESC

RETURN @Id
END

Now on small amounts of data (1000 rows or so) its quick, though that is due to the fact that the data is minimal, but on large amounts of data this function runs for along time. Specificly in the context of the following when there is 6 months of scoring data (100 000+ rows) to peruse.

SELECT [StructureId], [GroupId], [AnswerDateId], [ProductId], [Score]
FROM [Scoring]
WHERE AnswerDateId = GetLatestAnswerDateId([Structure], [GroupId], [ProductId], null)
AND [StructureId] = South Africa
AND [GroupId] = Computer Stuff
AND [ProductId] = Acer



Any idea's on how to make this quick? or quicker?

My Current runtime for calculating the 2500 base scores (totals 100 000+- rows) takes 15 hours. Though this is an initial calculation and is only supposed to be done once.
Also, this calculations are all correct, so my only issue itself is the speed of the entire process.

Thanks In Adance

Jonathan

WARNING: Running on cold coffee!

View 7 Replies View Related

Extremely Slow Table

Sep 16, 2005

Hi,I have a table defined asCREATE TABLE [SH_Data] ([ID] [int] IDENTITY (1, 1) NOT NULL ,[Date] [datetime] NULL ,[Time] [datetime] NULL ,[TroubleshootId] [int] NOT NULL ,[ReasonID] [int] NULL ,[reason_desc] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CS_ASNULL ,[maj_reason_id] [int] NULL ,[maj_reason_desc] [nvarchar] (255) COLLATESQL_Latin1_General_CP1_CS_AS NULL ,[ActionID] [int] NULL ,[action_desc] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CS_ASNULL ,[WinningCaseTitle] [nvarchar] (255) COLLATESQL_Latin1_General_CP1_CS_AS NULL ,[Duration] [int] NULL ,[dm_version] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CS_ASNULL ,[ConnectMethod] [nvarchar] (255) COLLATESQL_Latin1_General_CP1_CS_AS NULL ,[dm_motive] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CS_ASNULL ,[HnWhichWlan] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CS_ASNULL ,[RouterUsedToConnect] [nvarchar] (255) COLLATESQL_Latin1_General_CP1_CS_AS NULL ,[OS] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CS_AS NULL ,[WinXpSp2Installed] [nvarchar] (255) COLLATESQL_Latin1_General_CP1_CS_AS NULL ,[Connection] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CS_ASNULL ,[Login] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CS_AS NULL,[EnteredBy] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CS_ASNULL ,[Acct_Num] [int] NULL ,[Site] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CS_AS NULL ,CONSTRAINT [PK_SH_Data] PRIMARY KEY CLUSTERED([TroubleshootId]) ON [PRIMARY]) ON [PRIMARY]GOWhich contains 5.6 Million rows and has non clustered indexes on Date,ReasonID, maj_Reason, Connection. Compared to other tables on the sameserver this one is extremely slow. A simple query such as :SELECTSD.reason_desc,SD.Duration,SD.maj_reason_desc,SD.[Connection],SD.aolEnteredByFROM dbo.[Sherlock Data] SDWhere SD.[Date] > Dateadd(Month,-2,Getdate())takes over 2 minutes to run ! I realise the table contains severallarge columns which make the table quite large but unfortunately thiscannot be changed for the moment.How can i assess what is causing the length of Query time ? And whatcould i possibly do to speed this table up ? The database itself isrunning on a dedicated server which has some other databases. None ofwhich have this performance issue.Anyone have any ideas ?

View 5 Replies View Related

SSRS2005 Is Extremely Slow

Sep 17, 2007



Hello! I have a query that join five tables and returns around 45000 rows that takes no more than a minute to execute, in management studio, on a SQL Server 2005, 2CPU 32 bit(dual core), 4GB and RAID5 disk system. The O/S is Windows 2003 sp2 Standard Edition.

When the same query is executed in SSRS2005, with some drilldown and summary of drilldown levels, it never stops to execute.

Looking at the hardware in the performance monitor reveals nothing strange except that % CPU-time is around 40 percent. Memory resources over 2 GB are available all the time.

Any suggestions is appreciated!

Any problems with SQL Server 2005 source database running on SQL Server 2000 compatibility level?

Thomas Ivarsson

View 1 Replies View Related

SSIS Becomes EXTREMELY Slow After SP2 Upgrade

Feb 22, 2007

On a dual opteron server, viewing the properties of a task inside a data flow was immediate up until this morning.

We just installed SP2, rebooted, and now you right-click on any task and it takes between 30 secs and 5 minutes before the context menu pops-up.

The server is 99% idle, most of the 16 Gigs of memory are idle as well.

View 1 Replies View Related

Working With A Package Is Extremely Slow

Nov 17, 2006

I have a package that reads the contents of 11 Excel files into various tables. Opening this package in the designer, or with DTExecUI is extremely slow. In both cases when I open the package is takes over 10 minutes to do anything. Visual Studio gives the "Visual Studio is Busy" message for 10 minutes and DTExecUI just hangs. DTExecUI actually hangs twice, once when opening the package and a second time when clicking "Execute" (totalling over 20 minutes). It seems like no matter how I try to run the package it will always hang for 10 minutes before running with no status message or anything. Once it runs it completes quickly with no errors.

The various tasks in the package are fairly simple, most being Source > Data Conversion > Destination.

Any suggestions?

View 4 Replies View Related

Extremely Slow Client Connection To MSSQL

Jan 26, 2007

Hallo

i'm experiencing an extremely slow connection from a WXPP Sp2 client to a MSSQL2000 running on a W2k server. The client is running a VB6 application that connect with Windows authentication: every form requesting data opens with a long delay at the first launch; next attempts run normally fast.

In the same LAN there are some others identical clients, all running fine.

Every other network activity from that client is ok.

Where should i start to investigate from?

View 3 Replies View Related

Can Visual Studio 2005 BI Co-exist With Visual Studio 2003?

Jan 19, 2006

I ask because I'm still looking for the source of interface problems I have in using the SSIS designer.

View 4 Replies View Related

What Is The Best Visual Interface To SQL Server?

Feb 15, 2001

HELP!!! I've looked at a few, but none of them support insert and update. I hate to say it, but the Access inteface is better, but uses a different SQL than SQL Server. :(

Help,
mike

View 3 Replies View Related

Interface For Visual C++ In VS 2005?

Jun 13, 2007

I've been tasked to understand and develop an easy interface to query (insert, select, update, etc) a sql server compact database on an x86 win ce 5 machine. I'm using VS 2005 and have all the necessary SDK's installed. The problem is I can't find any good tutorials or documentation on sql server compact coding in C++ (only in C# and VB). Do y'all have any suggestions on where I can get started to learn the basic c++ sql interface coding?

Thanks!
Jeff


Edit: I'd like to note that I can run the sample northwind project on a win ce 5 x86 emulator, so it's not the setup that I need help with, but the actual coding.

View 6 Replies View Related

Visual Studio Database File And SQL Server Management Studio Express Question

Mar 17, 2007

I have a database in my "App_Data" folder of my visual studio project.  I can view it fine in Visual Studio's built-in tools for managing a database attached to a solution.  However i recently started playing around with the SQL Server Management Studio Express program.  When i attach my database to Management Studio, and try to run my program it crashes.  I think it might be a permissions error?!? When i detatch it and reattach it in visual studio it runs fine again.   Any suggestions? ThanksJason 

View 1 Replies View Related

MS Visual Studio 2005 Vs SQL Server Business Intelligence Development Studio

Apr 16, 2007

I recently installed the Evaluation Edition of SQL Server 2005 x64 and it appears that MS Visual Studio 2005 is installed in stead of SQL Server Business Intelligence Development Studio. When I choose new project the only template available is "Blank Solution". How do I get all the templates (i.e. Analysis Server Project, Integration Services Project, Report Model Project, Report Server Wizard project, etc.)?

Or would it be better to uninstall MS Visual Studio 2005 and attempt to reinstall BIDS?



View 4 Replies View Related

Visual Studio 2005 Standard And SQL Server Management Studio?

Sep 4, 2007

I am new to visual studio and I am still not sure of all its components and features.

I installed visual studio 2005 standard edition but cannot find SQL Server Management Studio?

I guess this must be because it is not included with Visual studio 2005 standard. Is it included with VS 2005 professional?

I want to add pictures of products to my shopping site using an SQL database and I’ve been told that SQL Server Management studio is required as it is a graphical tool.

How would I go about obtaining the SQL server management studio. There seems to be different versions of SQL server that it is confusing to know which one to purchase.

Will the SQL server 2005 version that comes with Visual studio standard be sufficient for me now right? I want to create a shopping site with hundreds, perhaps even thousands of products. I want to use an SQL server 2005 database. The database will include ‘dynamically generated’ product images if that is the correct terminology.

My goodness, it seems I still have so much to learn.

Thanks

View 1 Replies View Related

The Database Created Using Management Studio Cannot Be Connected To Visual Studio???help

May 13, 2008

 
 
I have created a database under management studio and i want it to be connected in visual studio but it failed
the error msgs said that the database can't be connected coz the database with same name exits but that is not true

View 2 Replies View Related

How Do I Get The Database That I Am Using In Visual Studio Into My SQL Server Management Studio?

Sep 12, 2007

How do i get the database that i am using in visual studio into my SQL server management studio?
i need to create some scripts to create stored procedures on a live server.

View 1 Replies View Related

Query Works SQL Server Studio Not Visual Studio

Feb 29, 2008

I have SSRS in Visual Studio. I created a query that works fine in SQL Server Management Studio, but when pasted into Visual Studio I get the error "An expression of non-boolean type specified in a context where a condition is expected, near '('.

Here is the query. Can anyone help on why this isn't working? Thanks.

SELECT CASE WHEN MONTH(dbo.MAS_CCS_ARN_InvHistoryHeader.SOTransDate) = MONTH(GETDATE()) AND YEAR(dbo.MAS_CCS_ARN_InvHistoryHeader.SOTransDate) = YEAR(GETDATE())
THEN dbo.MAS_CCS_ARO_InvHistoryDetail.SOExtChargeAmount ELSE 0 END AS CurrentMonth,
CASE WHEN SubString(dbo.MAS_CCS_GL_Account.Account,1,3) = '400' THEN 'ALEDO' ELSE ' ' END AS Location,
dbo.MAS_CCS_ARN_InvHistoryHeader.SOTransDate, dbo.MAS_CCS_ARN_InvHistoryHeader.InvoiceNumber,
dbo.MAS_CCS_AR1_CustomerMaster.CustomerName, dbo.MAS_CCS_ARO_InvHistoryDetail.DetailSeqNumber,
dbo.MAS_CCS_ARO_InvHistoryDetail.LineType, dbo.MAS_CCS_GL_Account.Account, dbo.MAS_CCS_ARO_InvHistoryDetail.SOExtChargeAmount
FROM dbo.MAS_CCS_AR1_CustomerMaster, dbo.MAS_CCS_ARN_InvHistoryHeader, dbo.MAS_CCS_ARO_InvHistoryDetail,
dbo.MAS_CCS_GL_Account
WHERE dbo.MAS_CCS_AR1_CustomerMaster.CustomerNumber = dbo.MAS_CCS_ARN_InvHistoryHeader.CustomerNumber AND
dbo.MAS_CCS_ARN_InvHistoryHeader.InvoiceNumber = dbo.MAS_CCS_ARO_InvHistoryDetail.InvoiceNumber AND
dbo.MAS_CCS_ARO_InvHistoryDetail.SOGLSalesAcct = dbo.MAS_CCS_GL_Account.AccountKey

View 1 Replies View Related

Is Management Studio Express Compatible With Visual Studio?

Sep 13, 2006

I have installed Visual Studio 2005 which includes SQL Server Express but not the Management Studio.

Can I install SQL Server Management Studio Express?

View 1 Replies View Related

SQL Server Mgmt Studio -- Annoying User Interface !!!

Jan 29, 2007

Hello, does anyone hate the new interface where you
manage the Table Relationships, Indexes, and etc?

I hate it a lot for these reasons.
1) Dialog window cannot be resized (really really annoying)
2) The Table-Relationship configuration dialog window is not as convenient to use as SQL Server 2000 Enterprise Manager.


I hope this is the correct place to provide feedback and
I hope this will get modified a bit in the next service pack (or) update....

Thanks

View 1 Replies View Related

Can't Access Reporting Services In Management Studio Or Web Interface Using Windows Integrated Security

May 12, 2008

I know from searching this forum that there have been many variations of the issue I'm currently suffering, but I haven't found anything quite like mine or a solution to solve it. The issue I'm running into is that I am unable to log on to Reporting Services using Management Studio or the web interface when Windows Integrated Security is enabled. I have full functionality using basic security, but the risks involved make it impossible to deploy basic authentication out into production. The error I'm receiving in Management Studio is The request failed with HTTP status 401: Unauthorized. (Microsoft.SqlServer.Management.UI.RSClient). I recieve the same error when I try the web interface.

I've looked the most recent logfile in WindowsSystem32LogFilesW3SVC1 and these entries match up to the time I attempted my authentication.



Code Snippet
2008-05-12 20:30:42 <Edited: Server IP> GET /reports - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:30:42 <Edited: Server IP> GET /reports - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 301 0 0
2008-05-12 20:30:42 <Edited: Server IP> GET /reports/ - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:30:46 <Edited: Server IP> GET /reports/home.aspx - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 302 0 0
2008-05-12 20:30:46 <Edited: Server IP> GET /reports/Pages/Folder.aspx - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:30:47 127.0.0.1 POST /ReportServer/ReportService2005.asmx - 80 - 127.0.0.1 - 401 2 2148074254
2008-05-12 20:30:47 127.0.0.1 POST /ReportServer/ReportService2005.asmx - 80 - 127.0.0.1 - 401 1 0
2008-05-12 20:30:47 127.0.0.1 POST /ReportServer/ReportService2005.asmx - 80 - 127.0.0.1 - 401 1 2148074248
2008-05-12 20:30:49 127.0.0.1 POST /ReportServer/ReportService2005.asmx - 80 - 127.0.0.1 - 401 2 2148074254
2008-05-12 20:30:49 127.0.0.1 POST /ReportServer/ReportService2005.asmx - 80 - 127.0.0.1 - 401 1 0
2008-05-12 20:30:49 127.0.0.1 POST /ReportServer/ReportService2005.asmx - 80 - 127.0.0.1 - 401 1 2148074248
2008-05-12 20:30:50 <Edited: Server IP> GET /reports/Pages/Folder.aspx - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 500 0 0
2008-05-12 20:30:50 <Edited: Server IP> GET /Reports/js/ReportingServices.js - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:30:50 <Edited: Server IP> GET /Reports/js/ReportingServices.js - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 0
2008-05-12 20:30:54 <Edited: Server IP> GET /Reports/styles/ReportingServices.css - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:30:54 <Edited: Server IP> GET /Reports/images/blank.gif - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:30:54 <Edited: Server IP> GET /Reports/images/blank.gif - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 0
2008-05-12 20:30:54 <Edited: Server IP> GET /Reports/images/48error.jpg - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:30:54 <Edited: Server IP> GET /Reports/styles/ReportingServices.css - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 0
2008-05-12 20:30:54 <Edited: Server IP> GET /Reports/images/48error.jpg - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 0
2008-05-12 20:31:07 127.0.0.1 GET /reports/ - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:31:07 127.0.0.1 GET /reports/ - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 1 0
2008-05-12 20:31:13 127.0.0.1 GET /reports/ - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:31:13 127.0.0.1 GET /reports/ - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 1 0


I tried to highlight one of each of the HTTP errors I am getting. 401.2 and 401.1 are the ones I kind of expected, but have no idea why I'm getting them. The 500 0 error is a bit troubling, because unless I'm mistaken thats a server side error.

Here's my current setup. As far as I can tell, I've done everything to set up correctly for Windows Integerated security.



My Specs
The server machine running all SQL 2005 services. It resides in a domain. All Clients are in the same domain.


Intel Dual Processor 3.20 gig Xenon

Windows Server 2003 w/ SP2

Microsoft Sql Server 2005 w/ SP2
Reporting Services Setup
The virtual directories Reports and ReportServer are set to Windows Integrated Security with Anonymous Access disabled. All other checkboxes in Directory Security are unchecked. For permissions in Reports, I have:


Administrators (servernameAdministrators) - Full Control

ASP.NET Machine Account - Modify, Read & Execute, List Folder Contents, Read, Write

Authenticated Users - Modify, Read & Execute, List Folder Contents, Read, Write

Creator Owner - No permissions

Domain Users - Read & Execute, List Folder Contents, Read

SQLServer2005ReportingServices]WebServiceUsers$... - Read & Execute, List Folder Contents, Read

SQLServer2005ReportServerUsers$... - Read & Execute, List Folder Contents, Read

SYSTEM - Full Control

Users (CompNameUsers) - Read & Execute, List Folder Contents, Read
In ReportServer I have the same permissions except Authenticated Users is absent.

At one point, I even added the account Everybody and gave it full control, and I still recieved a HTTP 401 error. Any help at what I might be missing would be a godsend.

Thanks.

View 1 Replies View Related

SQL Server 2005 - Studio Express Vs. Visual Studio 2005 Install

May 5, 2006

I'm very confused.  I installed Visual Studio 2005 and thought I understood that SQL Server 2005 came with it, but it appears that it's SQL Server 2005 - Express.  Can anyone tell me what I need to do in order to get Data Transformation Services loaded or the equivalent of DTS in SQL Express? 
 
 

View 1 Replies View Related

Visual Basic Slow Down Sql Server 2000 Running A Stored Procedure

Nov 30, 2007

I hav the following problem. I have written an stored procedure in sql server 2000 as the following
CREATE PROCEDURE dbo.pa_rellena
@pFechaInicio datetime

AS
declare @pFechaFin datetime
declare @auxcod_cen char(10)

declare @importeEfectivo decimal(17,2)
declare @importeTarjetas1 decimal(17,2)
declare @importeTarjetas2 decimal(17,2)
declare @importeVales decimal(17,2)
declare @importeTalones decimal(17,2)
declare @importeGastos decimal(17,2)


select @pFechaFin=@pFechaInicio+1


--Borramos las tablas temporales si las hemos creado con anterioridad y no se han borrado
if object_id('tmpCentros') is not null
drop table tmpCentros

if object_id('tmpCentros2') is not null
drop table tmpCentros2

if object_id('tmpMaxCajas') is not null
drop table tmpMaxCajas

if object_id('tmpCajasCentro') is not null
drop table tmpCajasCentro

if object_id('tmpVales') is not null
drop table tmpVales

if object_id('tmpDiarioEfectivo') is not null
drop table tmpDiarioEfectivo

if object_id('tmpDiarioTalones') is not null
drop table tmpDiarioTalones

if object_id('tmpDiarioTarjetas') is not null
drop table tmpDiarioTarjetas

if object_id('tmpDiarioSegundaForma') is not null
drop table tmpDiarioSegundaForma

if object_id('tmpDiarioGastosTarjetas') is not null
drop table tmpDiarioGastosTarjetas

if object_id('temp1') is not null
drop table temp1

--Seleccionamos todos los centros de Salvador Bachiller
select * into tmpCentros2
from centros
where centros.tienda=1
order by cod_cen

--Seleccionamos el maximo de cajas por cada centro

select cod_cen, max(cod_caja) as cajas into tmpMaxCajas
from cierrecaja
where fecha>=@pFechaInicio and fecha<@pFechaFin
group by cod_cen
order by cod_cen

--Mezclamos los centros con el maximo de cajas
select c.cod_cen, c.Centro, c.Direccion, c.localidad, c.provincia, c.cpostal, c.telefono, m.cajas, operaciones, cajas_tot, tienda, franquicia into tmpCentros
from tmpCentros2 as c left outer join tmpMaxCajas as m on c.cod_cen=m.cod_cen

--Cajas por centro
select distinct cod_cen as cod_cen, cod_caja as cod_caja into tmpCajasCentro
from cierrecaja
where fecha>=@pFechaInicio and fecha<@pFechaFin

--Los vales de cada centro
select cod_cen,sum(importe) as imp1 into tmpVales
from vales where
fecha>=@pFechaInicio and fecha<@pFechaFin
group by cod_cen

--Efectivo de cada centro
select cod_cen,'01' as vendedor,'EFECTIVO' as descripcion, (sum(diario.TotEuro)-Sum(Diario.Imppa2)) as importe1,0 as exp1, (sum(Diario.TotEuro)-sum(Diario.imppa2)) as importe2 into tmpDiarioEfectivo
from diario
where fecha>=@pFechaInicio and fecha<@pFechaFin and cod_cen in (select cod_cen from tmpCentros) and cod_caja in (select cod_caja from tmpCajasCentro) and diario.cod_pago='01'
group by cod_cen

--Talones por centro
select centros.cod_cen,'02' as vendedor,'TALONES' as descripcion, sum(diario.TotEuro) as importe1,0 as exp1, sum(Diario.TotEuro) as importe2 into tmpDiarioTalones
from centros inner join diario on centros.cod_cen=diario.cod_cen
where fecha>=@pFechaInicio and fecha<@pFechaFin and diario.cod_cen in (select cod_cen from tmpCentros) and cod_caja in (select cod_caja from tmpCajasCentro) and diario.cod_pago='02'
group by centros.cod_cen

--Tarjetas por centro
select cod_cen,'03' as vendedor,'TARJETAS' as descripcion, sum(diario.TotEuro) as importe1,0 as exp1, sum(Diario.TotEuro*(FPago.Descuento/100)) as importe2, sum(Diario.TotEuro) - sum(Diario.TotEuro*(FPago.Descuento/100)) as importe3 into tmpDiarioTarjetas
from FPago left join Diario on fpago.Cod_pago=Diario.cod_pago
where fecha>=@pFechaInicio and fecha<@pFechaFin and cod_cen in (select cod_cen from tmpCentros) and cod_caja in (select cod_caja from tmpCajasCentro) and Fpago.Descuento<>0
group by cod_cen

--Segunda Froma de Pago
select cod_cen,'03' as vendedor,'TARJETAS' as descripcion,sum(diario.imppa2) as importe1 into tmpDiarioSegundaForma
from fpago left join Diario on Fpago.cod_pago=diario.cod_pa1
where fPago.cod_pago<>'99' and fecha>=@pfechaInicio and fecha<@pFechaFin and cod_cen in (select cod_cen from tmpCentros) and cod_caja in (select cod_caja from tmpCajasCentro) and Fpago.Descuento<>0
group by cod_cen

--Comisiones tarjetas de pago
select cod_cen,'10' as vendedor, 'GASTOS (-)' as descripcion, sum(Diario.imppa2*(fPago.Descuento/100)) as importe2 into tmpDiarioGastosTarjetas
from Fpago left join Diario on FPago.cod_pago= Diario.cod_pa1
where fPago.cod_pago<>'99' and fecha>=@pFechaInicio and fecha<@pFechaFin and cod_cen in (select cod_cen from tmpCentros) and cod_caja in (select cod_caja from tmpCajasCentro) and Fpago.Descuento<>0
group by cod_cen
/*
--Venta neta por centro
declare cursortemporal cursor for select cod_cen from TmpCentros2

open cursortemporal
delete detallecaja_aux
fetch next from cursortemporal into @auxcod_cen
while @@fetch_status=0
Begin
select @importeVales=imp1 from tmpVales where cod_cen=@auxcod_Cen
select @importeEfectivo=importe2 from tmpDiarioEfectivo where cod_cen=@auxcod_Cen
select @importeTalones=importe2 from tmpDiarioTalones where cod_cen=@auxcod_cen
select @importeTarjetas1=importe3 from tmpDiarioTarjetas where cod_cen=@auxcod_cen
select @importeTarjetas2=importe1 from tmpDiarioSegundaForma where cod_cen=@auxcod_cen
select @importeGastos=importe2 from tmpDiarioGastosTarjetas where cod_cen=@auxcod_cen

select @importeVales=isnull(@importeVales,0)
select @importeEfectivo=isnull(@importeEfectivo,0)
select @importeTalones=isnull(@importeTalones,0)
select @importeTarjetas1=isnull(@importeTarjetas1,0)
select @importeTarjetas2=isnull(@importeTarjetas2,0)
select @importeGastos=isnull(@importeGastos,0)

print @auxcod_cen
print @importeVales
print @importeEfectivo
print @importeTalones
print @importeTarjetas1
print @importeTarjetas2
print @importeGastos

insert into detallecaja_aux (cod_cen,importe1)
values(@auxcod_cen, @importeVales+@importeEfectivo+@ImporteTalones+@ImporteTarjetas1+@importeTarjetas2-@importeGastos)
fetch next from cursortemporal into @auxcod_cen

select @importeVales=0
select @importeEfectivo=0
select @importeTalones=0
select @importeTarjetas1=0
select @importeTarjetas2=0
select @importeGastos=0
end

close cursortemporal
*/
select * from detallecaja_aux
GO

When I try to run it from visual basic it slow down the sql server.

What can I do?

View 2 Replies View Related

Visual Studio

Jun 17, 2008

Hi,

I am new to this environment, Can Someone help me in how to write the SSIS Packages using the Visual Studio in STEPS or using any links.

Thanks in Advance.

View 2 Replies View Related

DMX Vs Visual Studio

Dec 22, 2006

Hi



Are there any (important?) advantages of using data mining through DMX instead of Visual Studio 2005 on the SQL server 2005?





/Dennis

View 1 Replies View Related

SQL Mgt Studio Becomes Very Slow After A Few Hours

May 4, 2007

Hi everyone,

I'm connecting to my LOCAL MSSQL 2005 database using Management Studio. I find that after a few hours of use, Management Studio's connection to the database becomes extremely slow. For example, if I right click on a table and choose Open Table, it will take at least 30 secs to open the table. Then if I make changes to a record and move the cursor to the next row, it will take another 30 secs to update the record.

I don't think it's anything to do with indexes, cos my table is very small (less than 20 records).

I'm not running any batch jobs on my local database. In fact, my SQL Agent is turned off.

I notice this does not happen when I connect to my REMOTE database, which is hosted on a commercial web host.

What could be wrong here? Has anyone experienced this before?

Thanks for the help.

View 7 Replies View Related

Database In Visual Studio

Jan 13, 2007

When I try to create a database that will have fields for a date and a time the only data type option in visual studio is datetime. This stores data as dd/mm/yyyy-00.00.

how can I set it to store either a date dd/mm/yyy or a time 00.00 but not both.

As it is now I cant seem to store a time.

Thanks

jim

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved