WHERE Command On UNION Tables
Feb 19, 2008
Hi there, I have some identical tables that I want to query for a search Is there anyway I can execute the unions first then a where command on all the tables at once I have tried using go but it doesn't seem to work, so I put the where statemtents at the end of each union for now. Here's my code:
strSQL = "SELECT * FROM england WHERE company LIKE '%" & iKeyword & "%' OR address1 LIKE '%" & iKeyword & "%' OR address2 LIKE '%" & iKeyword & "%' OR address3 LIKE '%" & iKeyword & "%' OR address4 LIKE '%" & iKeyword & "%' OR address5 LIKE '%" & iKeyword & "%' OR postcode LIKE '%" & iKeyword & "%' " &_
"UNION ALL SELECT * FROM ni WHERE company LIKE '%" & iKeyword & "%' OR address1 LIKE '%" & iKeyword & "%' OR address2 LIKE '%" & iKeyword & "%' OR address3 LIKE '%" & iKeyword & "%' OR address4 LIKE '%" & iKeyword & "%' OR address5 LIKE '%" & iKeyword & "%' OR postcode LIKE '%" & iKeyword & "%' " &_
"UNION ALL SELECT * FROM wales WHERE company LIKE '%" & iKeyword & "%' OR address1 LIKE '%" & iKeyword & "%' OR address2 LIKE '%" & iKeyword & "%' OR address3 LIKE '%" & iKeyword & "%' OR address4 LIKE '%" & iKeyword & "%' OR address5 LIKE '%" & iKeyword & "%' OR postcode LIKE '%" & iKeyword & "%' " &_
"UNION ALL SELECT * FROM scotland WHERE company LIKE '%" & iKeyword & "%' OR address1 LIKE '%" & iKeyword & "%' OR address2 LIKE '%" & iKeyword & "%' OR address3 LIKE '%" & iKeyword & "%' OR address4 LIKE '%" & iKeyword & "%' OR address5 LIKE '%" & iKeyword & "%' OR postcode LIKE '%" & iKeyword & "%'"
View 15 Replies
ADVERTISEMENT
Sep 7, 2005
I am trying to get a consolidated sum of all the columns of the two tables that I am Using the UNION on. I can not get the sum function to work or the group by.
SELECT T2.State,t2.Taxcode,
Taxable =
Case
When T1.TaxCode <> 'exempt' and T1.TaxStatus = 'Y' then T1.LineTotal - ((T0.DiscPrcnt/100) * T1.LineTotal)
Else 0
End,
'NonTaxable' =
Case
When T1.TaxCode = 'exempt' or T1.TaxStatus = 'N' then T1.LineTotal + T1.DistribSum - ((T0.DiscPrcnt/100) * T1.LineTotal)
Else T1.DistribSum
End,
T1.VatSum as 'Total Tax', (T1.LineTotal + T1.DistribSum - ((T0.DiscPrcnt/100) * T1.LineTotal) + T1.Vatsum) as 'Line Total'
FROM inv1 t1 inner JOIN oinv t0 ON T0.DocEntry = T1.DocEntry inner join CRD1 T2 on T0.Cardcode = T2.CardCode
WHERE T0.DocDate >='[%1]' AND T0.DocDate <='[%2]' and t2.address = T0.shiptocode and t2.adrestype = 's'
UNION ALL
SELECT t2.state,t2.taxcode,
Taxable =
Case
When T1.TaxCode <> 'exempt' and T1.TaxStatus = 'Y' then -(T1.LineTotal - ((T0.DiscPrcnt/100) * T1.LineTotal))
Else 0
End,
'NonTaxable' =
Case
When T1.TaxCode = 'exempt' or T1.TaxStatus = 'N' then -(T1.LineTotal + T1.DistribSum - ((T0.DiscPrcnt/100) * T1.LineTotal))
Else T1.DistribSum
End,
-T1.VatSum as 'Total Tax', -(T1.LineTotal + T1.DistribSum - ((T0.DiscPrcnt/100) * T1.LineTotal) + T1.Vatsum) as 'Line Total'
FROM RIN1 t1 inner JOIN ORIN t0 ON T0.DocEntry = T1.DocEntry inner join CRD1 T2 on T0.Cardcode = T2.CardCode
WHERE T0.DocDate >='[%1]' AND T0.DocDate <='[%2]' and t2.address = T0.shiptocode and t2.adrestype = 's'
order by T2.STATE
View 2 Replies
View Related
Sep 17, 2007
Hi,
I have three tables named as BroadCastetails,PaymetMaster,MemberMaster.
I have two query as mentioned below--
SELECT MemberMaster.FirstName, MemberMaster.LastName, BroadCastDetails.BroadCastName FROM BroadCastDetails INNER JOIN MemberMaster ON 5 = MemberMaster.MemberID AND BroadcastCreationDateTime between '01/01/2007' AND '12/12/2007'
SELECT BroadCastDetails.ScheduledStartDateTime, BroadCastDetails.TotalCalls FROM BroadCastDetails UNION SELECT PaymentTransaction.TransactionDate, PaymentTransaction.CallsToCredit FROM PaymentTransaction
I want the result of the above two query in a GridView.How can I do that ? Its urgent...
View 2 Replies
View Related
Nov 18, 2003
Hi,
I have an Orders Table and a Freeshipping Table.
ORDERS
======
CustomerId OrderDate Quantity
========== ========= ========
1000 01/01/2003 5
1000 01/04/2003 9
1000 01/08/2003 14
2000 01/01/2003 4
1000 06/03/2003 9
4000 05/02/2003 4
FREESHIPPING
=============
CustomerID FreeDate
========== ========
1000 01/01/2003
1000 01/03/2003
How can I write a query that will return the following result to show the order details for customerid 1000
for a date range between 01/01/2003 and 01/08/2003
OrderDate Quantity FreeShipping
========= ======== ============
01/01/2003 5 Y
01/03/2003 0 Y
01/04/2003 9 N
01/08/2003 14 N
Note that even if an order was not placed and the date was a freeshipping date, it is still displayed in the resultset
Thanks in advance,
-ron
View 2 Replies
View Related
Mar 27, 2006
I have 2 Tables one called Reps and the other called STORES
I need to use a UNION statement but my Server is saying that the "UNION" is ERROR The Query Designer does not support the UNION SQL construct.
What command would I use to put these 2 tables together?
HELP!
View 5 Replies
View Related
Nov 8, 2007
I have 2 temporary tables from a previous operation, Tab1 and Tab2, with the same dimensions. How do I create a third table Tab3 with the same dimensions containing the the combined rows of the 2 previous tables? TIA!
Tab1
Col1 Col2 Col3
A1 B1 C1
A2 B2 C2
Tab2
Col1 Col2 Col3
X1 Y1 Z1
X2 Y2 Z2
X3 Y3 Z3
After the required sql operation I should have
Tab3
Col1 Col2 Col3
A1 B1 C1
A2 B2 C2
X1 Y1 Z1
X2 Y2 Z2
X3 Y3 Z3
View 7 Replies
View Related
Feb 10, 2015
This query works perfectly and orders by just as I need
Code:
Select
'1st' As [Type],
#Uno.ID
#Uno.Address,
#Uno.shippingInfo
FROM #Uno
[Code] ....
However, when I use it in a Union All so I can pull data from 2 diff tables, the order by statement no longer works. How can I order by data in 2 tables?
Code:
Select
'1st' As [Type],
#Uno.ID
#Uno.Address,
#Uno.shippingInfo
FROM #Uno
[Code] ....
View 1 Replies
View Related
Oct 4, 2013
I try to build some query on hierarchy data and after two days thinking about it i have null result. What I need is union more trees tables by root id to one table.
-- tree
-- this query is functional: OK
WITH tree (sid, parend_id, level) as
(
SELECT sid, parend_id, 0 as level
[Code] ....
But this query work with one root id (100); what can i do when i have more roots id ? -> generate each tree table separated by roots id and then all tables join to one (union).
View 1 Replies
View Related
Aug 5, 2007
Is it possible to combine the following tables:
Table1:
id
1
2
3
Table2:
licenses
3
2
1
To one table, like this:
id licenses
1 3
2 2
3 1
-There is always the same number of rows in both tables.
Thanks a lot!
View 9 Replies
View Related
Oct 4, 2007
Hello,
I'm using SQL2005, SP2
I have multiple temp tables with the same column structure that I would combine into into a single temp table using Unions.
Is this possible?
Example:
Select * From #temp1
Union All
Select * From #temp2
Union All
Select * From #temp3
Into #Temp4
I thought I would ask while I continue to research this in case someone came back with the solution before I was able to track it down elsewhere.
Thanks!
View 1 Replies
View Related
Oct 17, 2007
What is the standard way to union tables with exactly the same schema that are in different databases?
For example:
Code Block
USE db1 SELECT * FROM table1
UNION
USE db2 SELECT * FROM table2
this will return the following error:
Msg 156, Level 15, State 1, Line 3
Incorrect syntax near the keyword 'use'.
View 3 Replies
View Related
May 24, 2006
I have 2 tables
tblOpenSiteDates
Site: int
OpenDate: smalldate
Comment: VarChar
tblCloseSiteDates
Site: int
CloseDate: smalldate
Comments: VarChar
newLocationID: int
I am trying to get a view which would display a site with the open and close dates. Null is ok for a close date for those opens that are still open.. not every office has an open date and close date.. it is possible to have just a close date and not an open date (ie unsure of open date but I know its closing)
so the output would be
viewOpenCloseSites
Site: int
opendate: smalldate
closedate: smalldate
PLEASE HELP i just can not figure it out
thanks...
View 1 Replies
View Related
Jul 16, 2012
I have two tables with data that I need to get and display in a combobox. What I want to do is have the parent table listed in the combobox with all of its children indented. Sorted by parent then by child.
This SQL seems to be more complex than I have done previously
I can get all of the records from both tables easily:
Code:
SELECT strName, ID FROM tblParents as pp
INNER JOIN tblChildren as cc
ON cc.pID = pp.uiGUID
UNION (SELECT strName FROM tblChildren as c
INNER JOIN tblParents as p
ON c.pID = p.ID)
However, this simply returns a list that is not ordered in any fashion. I'd like to have all of the parent's children shown under the parent name (there is only 1 parent per child and multiple children per parent)
View 2 Replies
View Related
Oct 25, 2007
Hi!
I'm trying to get the results from three different tables, where they have some of the same results. I'm only interested in where they match and then trying to order by date (that's in three columns - M, D, Y). I read previous post in 9/07 but the result doesn't seem to order correctly. It does not have any rhyme or reason to the outputed results as it bounces back and forth through Oct, Nov and Dec posting and throughout all three tables. Here's my query below. Any ideas how I can get my ordering correct for all three tables to display all Oct, all Nov and all Dec?
Thanks so much
select date3, date2, date1, who, what
from
(
select date3, date2, date1, who, what from shows
union
select date3, date2, date1, who, what from shares
union
select date3, date2, date1, who, what from soiree
)
a order by date3, date2, date1
View 4 Replies
View Related
Apr 2, 2008
I have got the following union statement:
SELECT plan2008.jahr, plan2008.monat, plan2008.kdkrbez, plan2008.kdgrbez, plan2008.abgrbez, plan2008.artnr,
FROM plan2008
GROUP BY plan2008.jahr, plan2008.monat, plan2008.kdkrbez, plan2008.kdgrbez, plan2008.abgrbez, plan2008.artnr
UNION
SELECT fsp_auftrag.jahr, fsp_auftrag.monatnr, fsp_auftrag.kundenkreis, fsp_auftrag.kundengruppe, fsp_auftrag.abnehmergruppe, fsp_auftrag.artnr
FROM fsp_auftrag
GROUP BY fsp_auftrag.jahr, fsp_auftrag.monatnr, fsp_auftrag.kundenkreis, fsp_auftrag.kundengruppe, fsp_auftrag.abnehmergruppe, fsp_auftrag.artnr
My problem is that each table contains additional values like art_amount, art_turnover etc... whereby the first table contains plan values while the second table contains actual values.
My goal is to get plan as well as the actual values in one row, how is that possible? If I put the values into each of the selects I get two rows, which is not the wished output.
Is it possible to join the tables after the union took place?
Thanks in advance!
View 8 Replies
View Related
Apr 1, 2008
HI, Guys:
I've some AT_DATE tables (eg: AT_20080401, AT_20080402, ...) in SQLServer DB, and these AT_XX table have same columns. but table count could be variant, so I have to query sysobjects to get all of these tables. like this:
select name from sysobject where name like 'AT_%'
Now I try to create a view AT which is the union of all these AT_XX tables, such as:
Code Snippet
Create View AT as
select * from AT_20080401
union
select * from AT_20080402
union ...
but since I'm not sure how many tables there, it would be impossible to write SQL as above.
though I could get this union result via stored-procedure, view couldn't be created on the resultset of a procedure.
Create View AT as
select * from AT_createView() <-- AT_createView must be a function, not procedure
I've checked msdn, there is Multi-statement table-valued function, but this function type seems to create one temporary table, I don't want to involve much of insert operation because there could be more than 1million records totally in these AT_XX tables.
So is there any way to achived my goal?
any reference would be appreciated, thanks !
View 8 Replies
View Related
Feb 18, 2008
I'm trying to summarize costs assigned to active jobs for a manufacturing business. I need to aggregate work in process (WIP) cost that resides in labor-transaction and part-transaction tables based on transaction types, and transaction dates. Some transactions increase the WIP cost of the job while others decrease WIP. The business needs to see how much $$ is tied up in each job as of a particular date -- the calculation is:
ToDate (cost of materials and labor assigned to job)
- ToInv (cost of materials returned to inventory)
- ToSales (cost of materials sold).
I developed this query incrementally and, so far, the #ToDate, #ToInv, and #ToSales temp tables seem to be populating with the correct data. My thought was to combine these three tables with a UNION and then extract the grand totals and here's where I started getting the following error:
------------------------------------------
Incorrect syntax near the keyword 'UNION'.
------------------------------------------
The problem is with the UNIONs going into #myTotal.
I would appreciate any help with this. Also, please let me know if you can suggest a better design for this. Thanks!
Below is a simplified version of my query:
--#ToDate
CREATE TABLE #ToDate (JobNum varchar(14), Cost decimal (16,2)
INSERT INTO #ToDate (JobNum, Cost)
--M&S To Date
SELECT pt.jobnum,
SUM(pt.extcost) AS Cost
FROM parttran pt
JOIN jobhead jh ON pt.jobnum=jh.jobnum
WHERE trantype IN ( <valid trans types> )
AND jh.JobReleased = 1
AND pt.TranDate < '2007-9-30'
GROUP BY pt.jobnum
UNION -- This one works ok.
--L&B To Date
SELECT jh.JobNum,
sum(l.LaborRate*l.LaborHrs) + sum(l.BurdenRate*l.BurdenHrs) AS Cost
FROM LaborDtl l
JOIN JobHead jh ON l.JobNum = jh.JobNum
WHERE jh.JobReleased = 1
AND l.PayrollDate < '2007-9-30'
GROUP BY jh.JobNum
--#ToInv
CREATE TABLE #ToInv (JobNum varchar(14), Cost decimal (16,2)
INSERT INTO #ToInv (JobNum, Cost)
SELECT pt.jobnum,
SUM(pt.extcost) AS ToInv
FROM parttran pt
JOIN jobhead jh ON pt.jobnum=jh.jobnum
WHERE trantype IN (<valid trans types>)
AND jh.JobReleased = 1
AND pt.TranDate < '2007-9-30'
GROUP BY pt.jobnum
--#ToSales
CREATE TABLE #ToSales (JobNum varchar(14), Cost decimal (16,2))
INSERT INTO #ToSales (JobNum, Cost)
SELECT pt.jobnum,
SUM(pt.extcost) AS ToInv
FROM parttran pt
JOIN jobhead jh ON pt.jobnum=jh.jobnum
WHERE trantype IN (<valid trans types>)
AND jh.JobReleased = 1
AND pt.TranDate < '2007-9-30'
GROUP BY pt.jobnum
--#myTotal
CREATE TABLE #myTotal (JobNum varchar(14), Cost decimal (16,2), Source varchar(9))
INSERT INTO #myTotal (JobNum, Cost, Source)
SELECT d.JobNum, SUM(d.Cost) AS Cost FROM #ToDate d GROUP BY d.JobNum ORDER BY d.JobNum
UNION -- Problem**********************
SELECT i.JobNum, SUM(-1*i.Cost) AS Cost FROM #ToInv i GROUP BY i.JobNum ORDER BY i.JobNum
UNION -- Problem**********************
SELECT s.JobNum, SUM(-1*s.Cost) AS Cost FROM #ToSales s GROUP BY s.JobNum ORDER BY s.JobNum
--Select grand total for each job
SELECT JobNum, SUM(Cost) FROM #myTotal ORDER BY JobNum
--Drop temp tables
DROP TABLE #ToDate
DROP TABLE #ToInv
DROP TABLE #ToSales
DROP TABLE #myTotal
View 3 Replies
View Related
Aug 18, 2014
Currently I have a standard query with a join to several tables. There are two additional tables MAS_CTB and MAS_STB. I would like to do a union between those two tables to get FIELDVALUE which will exist in either the CTB table or the STB table and then have that value be returned with the results of the original query.
I can of course write a UNION from the main query to the CTB and then to the STB table, however it's about 80 dummy fields I would have to replicate in the union which is why I was wondering if there was a more simple way.
Main Query:
SELECT Field1, Field2...Field80
From Table1
Join Table2
Union Portion:
Select FieldValue <------
From MAS_CTB
UNION
Select FieldValue <-----Return to main query above
From MAS_STB
View 3 Replies
View Related
Jun 12, 2014
SQL Server 2008 r2...
I have a query which does 3 selects and Union ALLs each to get a final result set. The performance is unacceptable - takes around a minute to run. If I remove the Union All so that the result sets are returned individually it returns all 3 from the query in around 6 seconds (acceptable performance).
Any way to join the result sets together without using Union All.
Each result set has exactly the same structure returned...
Query below [for reference]...
WITH cte AS (
SELECT A.[PoleID], ISNULL(B.[IsSpanClear], 0) AS [IsSpanClear], B.[SurveyDate], ROW_NUMBER() OVER (PARTITION BY A.[PoleID] ORDER BY B.[SurveyDate] DESC) rownum
FROM[UT_Pole] A
LEFT OUTER JOIN [UT_Surveyed_Pole] B ON A.[PoleID] = B.[PoleID]
[Code] .....
View 4 Replies
View Related
Jun 15, 2004
i want to update a table where a linked table is a certian value
for example
i have a table that queues up calls and has whether they have been contacted or not as a boolean value.
but if the call is closed in another way i would like to update that table where the linked location table has a certian value
but in the query analizer it will only let you use one table to update is there another way to do this?
View 2 Replies
View Related
Apr 29, 2008
Why the sequence different?
select * from (
select id=3,[name]='Z'
union all select 1,'G'
union all select 2,'R'
union all select 4,'Z'
) as t
order by [name]
--result:
---------
--1 G
--2 R
--4 Z
--3 Z
select * from (
select id=3,[name]='Z'
union select 1,'G'
union all select 2,'R'
union all select 4,'Z'
) as t
order by [name]
--result:
----------
--1 G
--2 R
--3 Z--changed
--4 Z
View 3 Replies
View Related
Apr 11, 2008
Hi
I have a tables like below
TblA
ID(unique)---SessionID(unique)----Ref
TblB
VisitID(unique)---SessionID(Multiple)----Page--Pdcode
My question : How Do I bring all rows from TblB and matching single row from TblA (I have more than one sessionID in TblB and only one Unique SessionID in TblA).
The Select query I was using is
SELECT PageViews.ID AS ID, PageDetailView.VisitID, PageViews.PageAccessed, PageDetailView.PageAccessed AS Expr1, PageViews.QueryString,
PageDetailView.QueryString AS Expr2, PageViews.Referer, PageViews.SessionID, PageDetailView.SessionID AS Expr3, PageDetailView.PdtID,
PageDetailView.Pcode, PageDetailView.CustID, PageDetailView.OrdTot, PageViews.[Date]
FROM PageViews RIGHT OUTER JOIN
PageDetailView ON PageViews.SessionID = PageDetailView.SessionID
ORDER BY PageViews.ID DESC
View 9 Replies
View Related
Sep 27, 2007
Hi!
I want to get some fields from more than one table. How can I use select command to do this? Please help me! The results should be in one table only!
Thanks in advance!
View 9 Replies
View Related
Feb 14, 2006
Hi,I have two tables: Code and Color.The create command for them is :create table Color(Partnum varchar(10),Eng_Color char(10),Span_Color char(20),Frch_Color char(20),CONSTRAINT pkPartnum PRIMARY KEY(Partnum))create table Code(Partnum varchar(10),Barcode varchar(11),I2of5s varchar(13),I2of5m varchar(13),UPC varchar(11),BigboxBCode varchar(11),DrumBCode varchar(11),TrayBCode varchar(11),QtyBCode varchar(11),CONSTRAINT fkPartnum FOREIGN KEY(Partnum) references Color(Partnum))Now my question is,how can i give a select statement such that I can get all the fields asoutput.Also plz note that the above is a sample. I have another 9 tables and Ineed a solutionsuch that on being refered by Partnum, I can get all the attributes.Thanks
View 19 Replies
View Related
Apr 25, 2008
i've read the transact-sql command,
i known that the select command use to retrieve many fields from many tables with one command
select * from table1,table2
yes,
but i ' ve not seen the way to add,delete or update those fields from those tables with one command...
Is it possible? why?
I don't have any idea , can u help me
I want to know the sql commands , if it's possible
thanks for reply,
mochi
View 3 Replies
View Related
Feb 19, 2008
Hi Guys,
well as you can see from my thread SQLServer is new to me i am used to mysql and i c'ant find the equivalent anywhere on the net... Seams easy enough but i have been at it for 6 hrs and i give up... I am just making a quick database view tool. So please tell me.
How do i load the all tables of a database via an sql command?
Since it took me a while to find this i thought migth as well slap ip somewhere so here is the command to load all data bases... In any case worked for me so...
- > select * from master.dbo.sysdatabases;
And where in the ... can you find a reference to all sql server commands? ... Please.
Thanks for your help
View 4 Replies
View Related
Nov 6, 2006
Hi all,
I have a Union All transformation with 4 inputs and one output when I debug the package the sum of the different inputs rows does not match the row count in output.
I don't understand, I've used the Union All transform many times and I've never seen this.
Any idea why this could happen ?
View 18 Replies
View Related
Feb 23, 2007
i am using visual web developer 2005 and SQL 2005 with VB as the code behindi am using INSERT command like this Dim test As New SqlDataSource() test.ConnectionString = ConfigurationManager.ConnectionStrings("DatabaseConnectionString1").ToString() test.InsertCommandType = SqlDataSourceCommandType.Text test.InsertCommand = "INSERT INTO try (roll,name, age, email) VALUES (@roll,@name, @age, @email) " test.InsertParameters.Add("roll", TextBox1.Text) test.InsertParameters.Add("name", TextBox2.Text) test.InsertParameters.Add("age", TextBox3.Text) test.InsertParameters.Add("email", TextBox4.Text) test.Insert() i am using UPDATE command like this Dim test As New SqlDataSource() test.ConnectionString = ConfigurationManager.ConnectionStrings("DatabaseConnectionString").ToString() test.UpdateCommandType = SqlDataSourceCommandType.Text test.UpdateCommand = "UPDATE try SET name = '" + myname + "' , age = '" + myage + "' , email = '" + myemail + "' WHERE roll 123 " test.Update()but i have to use the SELECT command like this which is completely different from INSERT and UPDATE commands Dim tblData As New Data.DataTable() Dim conn As New Data.SqlClient.SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Database.mdf;Integrated Security=True;User Instance=True") Dim Command As New Data.SqlClient.SqlCommand("SELECT * FROM try WHERE age = '100' ", conn) Dim da As New Data.SqlClient.SqlDataAdapter(Command) da.Fill(tblData) conn.Close() TextBox4.Text = tblData.Rows(1).Item("name").ToString() TextBox5.Text = tblData.Rows(1).Item("age").ToString() TextBox6.Text = tblData.Rows(1).Item("email").ToString() for INSERT and UPDATE commands defining the command,commandtype and connectionstring is samebut for the SELECT command it is completely different. why ?can i define the command,commandtype and connectionstring for SELECT command similar to INSERT and UPDATE ?if its possible how to do ?please help me
View 2 Replies
View Related
Nov 4, 2006
Hi All,
i am using a OLE DB Source in my dataflow component and want to select rows from the source based on the Name I enter during execution time. I have created two variables,
enterName - String packageLevel (will store the name I enter)
myVar - String packageLevel. (to store the query)
I am assigning this query to the myVar variable, "Select * from db.Users where (UsrName = " + @[User::enterName] + " )"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, enterName,. I select that and when I click on OK am getting this error.
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
myVar variable, i have set the ExecuteAsExpression Property to true too.
Please let me know where am going wrong?
Thanks in advance.
View 12 Replies
View Related
Aug 30, 2004
Do somebody know how long (in chars) script(command) can be solved by SQL Command?
Thanks
View 1 Replies
View Related
Sep 19, 2006
Hi. I am writing a program in C# to migrate data from a Foxpro database to an SQL Server 2005 Express database. The package is being created programmatically. I am creating a separate data flow for each Foxpro table. It seems to be doing it ok but I am getting the following error message at the package validation stage:
Description: An OLE DB Error has occured. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object".
.........
Description: "component "OLE DB Destination" (22)" failed validation and returned validation status "VS_ISBROKEN".
This is the first time I am writing such code and I there must be something I am not doing correct but can't seem to figure it out. Any help will be highly appreciated. My code is as below:
private bool BuildPackage()
{
// Create the package object
oPackage = new Package();
// Create connections for the Foxpro and SQL Server data
Connections oPkgConns = oPackage.Connections;
// Foxpro Connection
ConnectionManager oFoxConn = oPkgConns.Add("OLEDB");
oFoxConn.ConnectionString = sSourceConnString; // Created elsewhere
oFoxConn.Name = "SourceConnectionOLEDB";
oFoxConn.Description = "OLEDB Connection For Foxpro Database";
// SQL Server Connection
ConnectionManager oSQLConn = oPkgConns.Add("OLEDB");
oSQLConn.ConnectionString = sTargetConnString; // Created elsewhere
oSQLConn.Name = "DestinationConnectionOLEDB";
oSQLConn.Description = "OLEDB Connection For SQL Server Database";
// Add Prepare SQL Task
Executable exSQLTask = oPackage.Executables.Add("STOCK:SQLTask");
TaskHost thSQLTask = exSQLTask as TaskHost;
thSQLTask.Properties["Connection"].SetValue(thSQLTask, "oSQLConn");
thSQLTask.Properties["DelayValidation"].SetValue(thSQLTask, true);
thSQLTask.Properties["ResultSetType"].SetValue(thSQLTask, ResultSetType.ResultSetType_None);
thSQLTask.Properties["SqlStatementSource"].SetValue(thSQLTask, @"C:LPFMigrateLPF_Script.sql");
thSQLTask.Properties["SqlStatementSourceType"].SetValue(thSQLTask, SqlStatementSourceType.FileConnection);
thSQLTask.FailPackageOnFailure = true;
// Add Data Flow Tasks. Create a separate task for each table.
// Get a list of tables from the source folder
arFiles = Directory.GetFileSystemEntries(sLPFDataFolder, "*.DBF");
for (iCount = 0; iCount <= arFiles.GetUpperBound(0); iCount++)
{
// Get the name of the file from the array
sDataFile = Path.GetFileName(arFiles[iCount].ToString());
sDataFile = sDataFile.Substring(0, sDataFile.Length - 4);
oDataFlow = ((TaskHost)oPackage.Executables.Add("DTS.Pipeline.1")).InnerObject as MainPipe;
oDataFlow.AutoGenerateIDForNewObjects = true;
// Create the source component
IDTSComponentMetaData90 oSource = oDataFlow.ComponentMetaDataCollection.New();
oSource.Name = (sDataFile + "Src");
oSource.ComponentClassID = "DTSAdapter.OLEDBSource.1";
// Get the design time instance of the component and initialize the component
CManagedComponentWrapper srcDesignTime = oSource.Instantiate();
srcDesignTime.ProvideComponentProperties();
// Add the connection manager
if (oSource.RuntimeConnectionCollection.Count > 0)
{
oSource.RuntimeConnectionCollection[0].ConnectionManagerID = oFoxConn.ID;
oSource.RuntimeConnectionCollection[0].ConnectionManager = DtsConvert.ToConnectionManager90(oFoxConn);
}
// Set Custom Properties
srcDesignTime.SetComponentProperty("AccessMode", 0);
srcDesignTime.SetComponentProperty("AlwaysUseDefaultCodePage", true);
srcDesignTime.SetComponentProperty("OpenRowset", sDataFile);
// Re-initialize metadata
srcDesignTime.AcquireConnections(null);
srcDesignTime.ReinitializeMetaData();
srcDesignTime.ReleaseConnections();
// Create Destination component
IDTSComponentMetaData90 oDestination = oDataFlow.ComponentMetaDataCollection.New();
oDestination.Name = (sDataFile + "Dest");
oDestination.ComponentClassID = "DTSAdapter.OLEDBDestination.1";
// Get the design time instance of the component and initialize the component
CManagedComponentWrapper destDesignTime = oDestination.Instantiate();
destDesignTime.ProvideComponentProperties();
// Add the connection manager
if (oDestination.RuntimeConnectionCollection.Count > 0)
{
oDestination.RuntimeConnectionCollection[0].ConnectionManagerID = oSQLConn.ID;
oDestination.RuntimeConnectionCollection[0].ConnectionManager = DtsConvert.ToConnectionManager90(oSQLConn);
}
// Set custom properties
destDesignTime.SetComponentProperty("AccessMode", 2);
destDesignTime.SetComponentProperty("AlwaysUseDefaultCodePage", false);
destDesignTime.SetComponentProperty("OpenRowset", "[dbo].[" + sDataFile + "]");
// Create the path to link the source and destination components of the dataflow
IDTSPath90 dfPath = oDataFlow.PathCollection.New();
dfPath.AttachPathAndPropagateNotifications(oSource.OutputCollection[0], oDestination.InputCollection[0]);
// Iterate through the inputs of the component.
foreach (IDTSInput90 input in oDestination.InputCollection)
{
// Get the virtual input column collection
IDTSVirtualInput90 vInput = input.GetVirtualInput();
// Iterate through the column collection
foreach (IDTSVirtualInputColumn90 vColumn in vInput.VirtualInputColumnCollection)
{
// Call the SetUsageType method of the design time instance of the component.
destDesignTime.SetUsageType(input.ID, vInput, vColumn.LineageID, DTSUsageType.UT_READWRITE);
}
//Map external metadata to the inputcolumn
foreach (IDTSInputColumn90 inputColumn in input.InputColumnCollection)
{
IDTSExternalMetadataColumn90 externalColumn = input.ExternalMetadataColumnCollection.New();
externalColumn.Name = inputColumn.Name;
externalColumn.Precision = inputColumn.Precision;
externalColumn.Length = inputColumn.Length;
externalColumn.DataType = inputColumn.DataType;
externalColumn.Scale = inputColumn.Scale;
// Map the external column to the input column.
inputColumn.ExternalMetadataColumnID = externalColumn.ID;
}
}
}
// Add precedence constraints to the package executables
PrecedenceConstraint pcTasks = oPackage.PrecedenceConstraints.Add((Executable)thSQLTask, oPackage.Executables[0]);
pcTasks.Value = DTSExecResult.Success;
for (iCount = 1; iCount <= (oPackage.Executables.Count - 1); iCount++)
{
pcTasks = oPackage.PrecedenceConstraints.Add(oPackage.Executables[iCount - 1], oPackage.Executables[iCount]);
pcTasks.Value = DTSExecResult.Success;
}
// Validate the package
DTSExecResult eResult = oPackage.Validate(oPkgConns, null, null, null);
// Check if the package was successfully executed
if (eResult.Equals(DTSExecResult.Canceled) || eResult.Equals(DTSExecResult.Failure))
{
string sErrorMessage = "";
foreach (DtsError pkgError in oPackage.Errors)
{
sErrorMessage = sErrorMessage + "Description: " + pkgError.Description + "";
sErrorMessage = sErrorMessage + "HelpContext: " + pkgError.HelpContext + "";
sErrorMessage = sErrorMessage + "HelpFile: " + pkgError.HelpFile + "";
sErrorMessage = sErrorMessage + "IDOfInterfaceWithError: " + pkgError.IDOfInterfaceWithError + "";
sErrorMessage = sErrorMessage + "Source: " + pkgError.Source + "";
sErrorMessage = sErrorMessage + "Subcomponent: " + pkgError.SubComponent + "";
sErrorMessage = sErrorMessage + "Timestamp: " + pkgError.TimeStamp + "";
sErrorMessage = sErrorMessage + "ErrorCode: " + pkgError.ErrorCode;
}
MessageBox.Show("The DTS package was not built successfully because of the following error(s):" + sErrorMessage, "Package Builder", MessageBoxButtons.OK, MessageBoxIcon.Information);
return false;
}
// return a successful result
return true;
}
View 2 Replies
View Related
Jan 23, 2001
Hi,
I am using DTS to import data where the query involves the UNION .
Select a,z,y from x
UNION
select b,z,y from y;
Only the columns Z,y appearing in the output. Is there any known problem with UNION in DTS?
Thanks
View 3 Replies
View Related
