I need to check if any user in the database is assigned any permission
WITH GRANT OPTION. Please let me know how do I check this. Also let me
know if assigning rights WITH GRANT OPTION is possible from enterprise
manager.
Thanks in advance
Kamal
GRANT SELECT ON [dbo].[TblAreaCatmap] TO [admin] prevent grant from being automaticly add to each column?
Is there a way when you issue a grant select to a table or a view to not also grant select for each column.
The problem is when you use the grant command it automaticly adds the grant command to each column. I want to grant the permission at the table level so when the table is scripted it only has a single grant command instead of a grant for the table and a grant for each column which is not needed.
The sql managemnt studion interface will allow you to do this but onlt by using the interface. If you issue the above command from a query window it also creates A GRANT FOR EVERY COLUMN. How can I stop this behavior.
I am writing a stored procedure which updates a table, but when I run the stored procedure using a login that I have granted execute privileges on, then I get a message that I cannot run an update on the table. This would happen in dynamic sql... while my SQL has parameter references, I don't think it is considered dynamic SQL?
sproc:
CREATE PROCEDURE [schemaname].[SetUserCulture]
@UserID int
, @Culture nvarchar(10)
AS
UPDATE dbo.SecUser
SET Culture = @Culture
WHERE UserID = @UserID
execute SQL:
EXEC schemaname.SetUserCulture @UserID = 9, @Culture = N'x'
error:
The UPDATE permission was denied on the object 'SecUser', database 'DatabaseName', schema 'schemaname'.
In SQL Server 2005 SP2 I want to grant the ability to create views to a user but in order to do this it requires that the users has the ability to grant alter on a schema.
Is there any way to grant this privilage without granting alter on schema also?
Have a certificate and symmetric key that i have used the following to GRANT to logins. How can I find out which SQL logins have the GRANT CONTROL and GRANT VIEW DEFINTION?
GRANT VIEW DEFINITION ON SYMMETRIC KEY:: Symetric1 TO Brenda
GRANT CONTROL ON CERTIFICATE:: Certificate1 to Brenda
Hi everyone In my SqlServer Management Studio Express, on start up it shows the server type option, but greyed.So that value is fixed to database engine. ( I'm trying to work on an SqlServer Compact Edition database through the SSMStudiothat's why I'm trying to get this to change.)Besides, after I connect i go to the Object Explorer, expand the server node, and go to Replication.When i expand replication, i get the "Local Subscription" option, but nothng for Publication.( I want to work on Merge Replication, that's why I desparately need Publication to work)Am i missing something here? I did not install SqlServer separately, I only have what comes bundled with the Visual Studio 2005 Setup.
View 2 Replies View RelatedSo I started a new job recently and have noticed a few strange configurations. Typically I would never mess with min memory per query option and index create memory option configuration because i just haven't seen any need to. My typical thought is that if it isn't broke... They have been modified on every single server in my environment.
From Books Online:
• This option is an advanced option and should be changed only by an experienced database administrator or certified SQL Server technician.
• The index create memory option is self-configuring and usually works without requiring adjustment. However, if you experience difficulties creating indexes, consider increasing the value of this option from its run value.
Hi,
I was wondering, how do I make a user for my php app, like I do in MySQL?
so here i go explaining my problem: I create an empty database. then I use the .net aspregsql tool to make the tables and the procs and everything, and it does. when i view my database it has the 11 empty tables the sprocs and the roles and everything. BUT when I open up the "asp website configuration" to add some users, it gives the following error:EXECUTE permission denied on object 'aspnet_CheckSchemaVersion', database 'masfeni_fakebetsdb', owner 'dbo'.
View 6 Replies View RelatedI have created a table with ..
username, password, grant
username and password are nvarchar
grant is a bit
I want to check the availability of the username and password and then check if it is granted to access or not ..
so I made a selection query for getting the grant when username ==x and password = y
x=data come from another page
y=data come from another page
then put the selected grant or deny ( true or false) in a data set ..
and then check if it is grant ( true) to complete what I want >>>
else ( deny ....( false )) to return a reponse of deny username or password...
but everytime the dataset is empty ..
this is my code ...
sqlConnection1.Open();
SqlDataAdapter da=new SqlDataAdapter("select grant_deny from users where username='"+Request.QueryString["username"]+"' and password='"+Request.QueryString["password"]+"'",sqlConnection1);
da.Fill(ds,"users");
sqlConnection1.Close()
if (ds.Tables[0].Rows[0]["grant_deny"].ToString()=="true")
{
.
.
.
.
}
else
{
Response.write("error");
}
what is wrong ..??
and if there is anyone has another solution for what I want .. I appriciate any sample code,...
thanks in advance..
Hello All,
I have 2 logins
1. Login1 ( has dbo permissons)
2. Login2 ( Data reader )
I have Created a table Tbl1 using Login1 ,
I have used grant statement to give select permissons to Login2
When I connect to the database using Login2 and use the T-Sql :- Select *
from Tbl1 , I get an error saying Invalid object name 'Tbl1'.
Thanks in Advance
Can someone explain ..what is the basic difference between TSQL Stmts Grant and Revoke?
A reply will be highly appreciated
Thanks
Hi all,
Can I grant select only permission on all objects in the database? I have users that I need to give view access only on stored procedures, triggers, and functions. Thanks.
how to grant alter table and set identity insert column permission in sql server 2005,
help is apprecitate
Hi,
I want one of my database users to be able to grant execute to procedures, but I don't want the user to have sys admin rights.
Is this possible. Kind of a statement like the following:
GRANT EXECUTE ON [GRANT EXECUTE] TO myuser
Thanks in advance
I want to Grant permission for a table which is residing at another server's database. I have added the server as a linked server to my database and i am able to do all DML (Insert, Update, Delete) operations from the source server to the target server's table. But i am not able to Grant permission for the table.
View 11 Replies View RelatedI am trying to write a SQL script that grants execute permissions on all stored procedures for a single user (test_user).
I am running SQL server 2005
Does anyone have a script to do this.
Many thanks
hi to all,
can anyone tell me what is differences between take ownership and control permission in sql server 2005?
thank you
honey sachdeva
hello,
what permission do I need to grant to a user to let him to read a table in a linked server object?
Thanks
Hi,
is there a way to grants object privileges on
all tables of database to an user?
like this:
grant select, insert, update, delete on <all tables> to usernamedb
go
thanks!!!!
Is it possible to grant all privilege for all tables of a specified database through script? Because i have to send the script to user side and i can't do it manually in Enterprise Manager.regards,
View 1 Replies View Relatedit is possible to grant all privilege (CRUD) to specified table to user. But, now, i want to grant all privilege (CRUD) of all tables, views, sp, ... of database to the user. is it possible?regards,
View 5 Replies View RelatedGRANT SEND ON SERVICE::SqlQueryNotificationService TO guestI need to run that T-SQL command to allow Query Notifications and I keep getting this error.Cannot find the service 'QueryNotificationService', because it does not exist or you do not have permission.I am logged in with my user account with Administrator rights along with just about every permission I can think of for the SQL Server account. I even logged in as SA and it also fails when trying to run this command. This is being done on SQL Express. So I also logged into my Windows 2003 Server with a fresh install of SQL Server 2005 Dev Edition and this also fails with the same error.Clearly I need some permission correction or something else is missing from both installations.Please help!
View 1 Replies View RelatedI run the following query...using sql analyzer dbo.aCVChangeSQLPassword 'user1','user1',''I am logged in as user1 in the sql analyzer...It chnages my password, in sql server, however gives me this message...Grantor does not have GRANT permission.Password changed.(1 row(s) affected)Server: Msg 4613, Level 16, State 1, Procedure aCVChangeSQLPassword, Line 27Grantor does not have GRANT permission.
Line no 27 has the folliwng code that I execute...
exec sp_password @old,@new,null
Hi I have installed Sql server 2005. I tried to give "Create database" permission to master database I am getting an errorGrantor does not grant permission (Microsoft SQL Server, Error 4613) May I know what is the reason for this.How to resolve it. RegardsKaran
View 1 Replies View Relatedhello all,
I would like to grant the MACHINENAMEASPNET user all acccess to my MSSQL database (i.e tables and stored procedures. I can do this through enterprise manager but id rather do it programatically so i can add it to my database creation script. What is the syntax for this?
I thought it would be along the lines of:
Grant all on databasename to localhostASPNET.
But obviously its not! Please help!
thanks
Tom
Can I grant rights to "public" role ( customize it). Our app uses it.
thanks,
It seems that SQL7 has lost the "Grant All" option previously available in SQL 6.5. Is anybody aware of an equiviant in SQL7?
Any help would be gratefully received.
Is there a command that will grant all rights select, delete, update, execute
on all objects in a database to a user? But not be DBO
I am trying to set up a security system for my senior developers where they automatically can execute any procedure. It is in the System Administrator server role. Is there any way I can grant this role to their database role withour giving them complete System Adminstrator rights?
View 3 Replies View RelatedHi Listers,
Can anyone help me on users Access rights. The problem is I have created users called finance and sales. Sales have default database called Salesdb. Similarly finance have default database called Financedb.
The user sales created a table called 'daily_report' in salesdb and he is also belongs to the database role of db_ddladmin. The user finance doesn't have any access rights to this salesdb database and he didnot belong to any database roles in financedb itself. But I don't know, this finance user he is able access all the rights of 'daily_rep' table of salesdb database. Even the user sales has revoked all the access rights from the finance user, he still ables to modify/insert/select/delete the records of 'daily_rep' table of Salesdb database.
Can anyone help me please.
tks in advance,
Sam
Hello:
Is there any way to grant all permissions on all of the tables in a database without doing a GRANT ALL command for each table?
Thanks in advance.
Can anyone help me please.
Healp please.
Does anybody know how to make xp cmdshell runnable for users other than Admin. It should be possible to grant execute to others, but i can't figure out how.
This is what i found:
Be aware that when you grant execute permission for xp_cmdshell to users, the users will be able to execute any operating-system command at the Windows NT command shell that the account running SQL Server (typically local system) has privilege to execute.
To restrict xp_cmdshell access to users who have administrator permission on the Windows NT-based computer where SQL Server is running, use SQL Setup or SQL Enterprise Manager to set the server options, selecting the "xp_cmdshell - Impersonates Client" option. With this option selected, only users who have connected to SQL Server via a trusted connection and are members of the local Administrators group on that computer are allowed to use xp_cmdshell. The commands run by xp_cmdshell continue to execute in the server's security context.