Hi
I have a data flow task where I have to write to a flat file. It works fine for me. But the thing is next timeI run the package it must write the data in the OLDEB source to a different copy. Usually the data is overwritten or appended to already existing data. What I want is everytime the package is run the data must be written to a different copy.
Thanks
Sai Abhiram Bandhakavi
I have a Foreach loop which scans a table, and gets names of a bunch of procedures, and then back in the foreach loop, they get executed. Im trying to figure out how I can create a sort of log file to say the name of the procedure that is getting executed currently and the current date time stamp onto a flat file. I havent been able to figure this out yet..anyone know how to do this? I grab the names of the storedprocedures from the table and store it in a variable and use the name from the variable to actually execute the stored procedure.
I guess in essence, the question is how do i directly write lines of 'text' (from say a variable) into a flat file.
I'm doing a test package which reads a flat file, makes an adjustment using the derived column task and writes to the same flat file. But, the read locks the flat file, so the write can't access it. Any ideas for a resolution?
Thanks,
Dave
Hi,
I am writing to a flat file. When the data is written to a flat file the columns have to be tilde seperated i.e ~.
What I am doing is I am taking a destintaion text file and having all the columns as tild seperated. Is there any way I can
avoid doing this. That is I should not mention couluns in the text file.
Lastly I want the columns to have a width that is fixed.
How I can do this.
Thanks
Sai
I'm writing to a flat file destination (CSV file) which contains 2 header rows, lets call it Col1 and Col2.
For some reason, the header rows seem to get duplicated in the output - i.e.
Col1,Col2
A,B
Col1,Col2
C,D
Is there any way to resolve this?
I don't want the file to be overwritten everytime since its used for record-keeping purposes.
Thanks
I'm unable to figure out how to write a column header to my flat file destination. My source is a OLE DB SQL query and I need the column names as a header row in my text file destination. This seems easy but the closet I can find is hardcoding the column header row in the header property. Is this the only option?
Thanks
Flat file is the source for to load the data into a table. I am using "Derived Column Component" for the data validation.
"Derived Column Component" Fails then i am writing/redirecting the records into the Flat File using "Flat File Destination" component.
It works fine except the following the issue.
Issue:
The derived columun value (that cause an error) is not get inserted into the Flat File
Scenario:
the data comes as "000000" and tring to convert to date format
(DT_DATE)("20" + RIGHT(Check_Date,2) + "/" + SUBSTRING(Check_Date,1,LEN(Check_Date) - 4) + "/" + SUBSTRING(Check_Date,LEN(Check_Date) - 3,2))
The above expression is working fine, except the data 000000 not passed into the Flat File Destination.
Pls advise. Thank you.
I have a set of parent/child records that need to be exported to a space delimited Flat File. Each parent record must be followed by 3 child records, each on their own line with different format.
I have a prototype using the Derived Column component that concatinates the various fields of each record into one "wide" text column. This fools SSIS to think that each row has the same format. Then I merge them together using an artificial sort id. But this seems overly tedious and very brittle.
What would be the best approach to writing these records out? I'm hoping there is a better more maintainable method.
Thanks,
Jon
Hi Folks,
I would like to write my table to a delimited file but I seem to have no choice but to use comma as the delimiter. Is there any way I can choose the delimiter ?
Thanks.
Sid
Hi,
I am trying to write to a fixed format flat file using Flat File Destination Data Flow Component. I have all required information gathered from more than one sources. But when I tried to format the columns to a big string that will make up one line in the flat file, I could not figure out how to do that. Couple of issues that I am facing are:
How to padd different columns? For example, One interger column has could be 1 to 10 character long in my case. When I convert to string, dont know how to padd the remaining characters i.e. if the value of integer is '1234', it should be written to file as '1234 ' . Which transformation is best in this case, if available?
How to convert T-SQL datetime to a specific date and time format to write in the flate file? I have to write these date formats depending upon one of the parameters passed.
Also, I dont want to put a delimiter at the end of each column, just the new line characters at the end of each record.
Some of the columns has some unwanted characters (like new line characters) how to find them and remove them from the string.
Can we directly write columns to a specific position in the flat file? e.g. col 1 a position 1 and col2 starts at postion 20 etc.
Your co-operation will be appreciated.
Thanks,
Paraclete
I have a variable defined as "Country". Based on the value, the header row printed needs to be different.
I've already created a 'HeaderRow' variable that I'm able to set using a script task. But how can you set the Header text value at run time from the variable? There is no expression defined for the Header with the Flat File Destination object, and when I attempt to reference the HeaderRow variable as the Header text, the variable name is printed as the header.
Another approach I tried was to write the Header Row separately through another data flow task, but the issue here is: what is the input source when all you have is a Country variable?
I have a package that contains three database tables (Header, detail and trailer record) each table is connected via a OLE DB source in SSIS. Each table varies in the amount of colums it holds and niether of the tables have the same field names. I need to transfer all data, from each table, in order, to a flat file destination.
View 6 Replies View RelatedWe are using an ADO.NET provider in SSIS to read data from a SQL Server 2000 table that contains DateTime columns to write to a Flat File Destination. When the date values are written to the file they are formatted in TimeStamp to the 10th decimal position; e.g.2006-04-24 12:00:00.123000000?. Since SQL Server supports values to Timestamp(3), we need to truncate the last seven zeros to put the data in this format 2006-04-24 12:00:00.123? to keep the file as small as possible.
Since we have several hundred DateTime columns in scope for our requirements we are looking for the least logic/effort to accomplish this task. We can do this via Data Conversion and Derived Column transformations to cast the dates and strings but it is very labor intensive. It would be something like singing 99 bottles of beer on the wall eight times in a row with each verse taking 3 minutes each. Yikes.
We have tried casting the DateTime columns to varchar in the SELECT statement but receive this format Apr 24 2006 12:22PM?.
Is there a configuration we've missed that forces timestamp(10) with non significant digits?
Hello all,
I was trying to run a test to write a ebcdic file out with a comp - 3 number (testing this for other people) and have run into a problem writing the string out to the flat file destination. I have the following script component:
Code Block
' Microsoft SQL Server Integration Services user script component
' This is your new script component in Microsoft Visual Basic .NET
' ScriptMain is the entrypoint class for script components
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Public Class ScriptMain
Inherits UserComponent
Public Overrides Sub CreateNewOutputRows()
'
' Add rows by calling AddRow method on member variable called "Buffer"
' E.g., MyOutputBuffer.AddRow() if your output was named "My Output"
'
Output0Buffer.AddRow()
Dim myByteArray() As Byte = {&H12, &H34, &H56, &H7F}
Output0Buffer.myByteStream = myByteArray
Output0Buffer.myString = "ABCD"
Output0Buffer.myString2 = "B123"
myByteArray = Nothing
End Sub
End Class
I have added myByteStream as a DT_BYTES length 4, myString as (DT_STR, 4, 37) and myString2 as (DT_STR, 4, 37) to the output 0 buffer.
I then add a flat file destination with code set 37 (ebcdic us / canda) with the corresponding columns using fixed width.
When i place a dataviewer on the line between the two the output looks as I expect ("0x12 0x34 0x56 0x7F", "ABCD", "B123"). However, when it gets to the flat file destination it errors out with the following:
Code Block
[Flat File Destination [54]] Error: Data conversion failed. The data conversion for column "myByteStream" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
If i increase the size of the byte stream (say, to 50) the error goes away but I am left with the string "1234567F" instead of the appropriate hex values. Any clues on how to go about this? I obviously don't care if it gets transferred to "readable" text as this is supposed to be a binary stream, thus the no match in target page seems superfulous but is probably what is causing the problems.
NOTE: this is relating to the following thread (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2300539&SiteID=1) in that I am trying to determine why these people are not seeing the "UseBinaryFormat" when importing an EBCDIC file (i see this fine when i use an ftp'd file, but it auto converts to ascii) with comp-3 values. I also see the "UseBinaryFormat" when I am importing a regular EBCDIC file which I create that has no import errors with zoned decimals.
Hi,
I am testing SSIS and have created a Flat File Destination. I defined the Flat File Connection as New for the first time and it worked fine. Now, I would like to go back and modify the Flat File Connection in the Flat File Destination Editor, but it allows only to create a New connection rather allowing me to edit the existing one. For testing, I can go back and create a new connection, but if my connection had 50-100 columns then it would be an issue to re-create it from scratch.
Did someone else faced this issue?
Thanks,
AQ
Hi,
I have a situation where a tab limited text file is used to populate a sql server table.
The tab limited text file comes from a third party vendor. There are fixed number of columns we need to export to the sql server table. However the third party may add colums in the text file. Whenenver the text file has an added column (which we dont need to import) the build fails since the flat file connection manager does not create the metadata for it again. The problem goes away where I press the button "Reset Columns" since it builds the metadata then. Since we need to build the tables everyday we cannot automate it using SSIS because the metadata does not change automatically. Is there a way out in SSIS?
I am transferring data from an OLEDB source to a Flat File Destination and I want the column width for all of the output columns to 30 (max width amongst the columns selected), but that is not refected in the Fixed Width Flat File that got created. The outputcolumnwidth seems to be the same as the inputcolumnwidth. Is there any other setting that I am possibly missing or is this a possible defect?
Any inputs will be appreciated.
M.Shah
Hi all,
I m using SSIS and i am transfering the data from Flat File Source to the OLE DB destination File. The source file contain some corrupt data which i am transfering to the other Flat file destination file.
Debugging is succesful but i am not getting any error output in the Flat file destination file.
i had done exactly which is written in the msdn tutorial of SSIS.
Plz tell me why i am not getting the error output in the destination flat file?
thanx
Hi,
I'm trying to write the content of variables on flat files... is that possible?
Thanks!
First, a couple of important bits of information. Until last week, I had never touched SISS, and therefore, I know very little about it. I just never had the need to use it...until now. I was able to convert my first 3 flat files to SQL2005 tables by right clicking on "SISS Package" and choosing "SISS Import and Export Wizard". That is the extent of my knowledge! So please, please, please be patient with me and be as descriptive as possible.
I thought I could attach some sample files to this post, but it doesn't look like I can. I'll just paste the information below in two separate code boxes. The first code box is the flat file specifications and the second one is a sample single line flat file similar to what I'm dealing with (the real flat file is over 2 gigs).
My questions are below the sample files.
Code Snippet
Record Length 400
Positions Length FieldName
Record Type 01
1,2 L=2 Record Type (Always "01")
3,12 L=10 Site Name
13,19 L=7 Account Number
20,29 L=10 Sub Account
30,35 L=6 Balance
36,37 L=1 Active
37,41 L=5 Filler
Record Type 02
1,2 L=2 Record Type (Always "02")
3,4 L=2 State
5,30 L=26 Address
31,41 L=11 Filler
Record Type 03
1,2 L=2 Record Type (Always "03")
3,6 L=4 Coder
7,20 L=14 Locator ID
21,22 L=2 Age
23,41 L=19 Filler
Record Type 04
1,2 L=2 Record Type (Always "04")
3,9 L=7 Process
10,19 L=10 Client
20,26 L=6 DOB
26,41 L=16 Filler
Record Type 05
1,2 L=2 Record Type (Always "05")
3,16 L=14 Guarantor
17,22 L=6 Guar Account
23,23 L=1 Active Guar
**There can be multiple 05 records, one for each Guarantor on the account**
and the single line flat file...
Code Snippet
01Site1 12345 0000098765 Y 02NY1155 12th Street 03ELL 0522071678 29 04TestingSmith,Paul071678 05Smith, Jane 445978N 05Smith, Julie 445989N 05Smith, Jenny 445915N 01Site2 12346 0000098766 N 02MN615 Woodland Ct 04InfoJones,Chris 012001 01Site3 12347 0000098767 Y 02IN89 Jade Street 03OWB 6429051282 25 04Screen New,Katie 879500
As you can see, each entry could have any number of records and multiples of some of the record types, with one exception, every entry must have a "01" record and can only have one "01" record. Oh, and each record has a length of 400.
I need to get this information into a SQL 2005 database so I can create a front end for accessing the data. Originally, I wanted one line for each account and have null values listed for entries that don't have a specific record. Now that I've looked at the data again, that doesn't look like a good idea. I think a better way to do it would be to create 5 different tables, one for each record type. However, records 2 through 5 don't have anything I can make a primary key. So here are my questions...
Is it possible to make 5 tables from this one file, one table for each of the record types?
If so, can I copy the Account number in record 01, position 13-19 in each of the subsequent record types (that way I could link the tables as needed)?
Can this be done using the SISS Import and Export Wizard to create the package? If not, I'm going to need some very basic step by step instructions on how to create the package.
Is SISS the best way to do this conversion or is there another program that would be better to use?
I know this is a huge question and I appreciate the help of anyone who boldly decides to help me! Thank you in advance and I welcome anyone's suggestions!
How can I take this example Flat file and parse out each section to a new flat file? Each section starts with HD (header row)
http://www.webfound.net/flat_file_example.txt
e.g. an example output file based on above (cutting out the first section) would be:
http://www.webfound.net/flatfile_output.txt
Also, I'll need to grab a certain value in each header row (certain position in the 100 byte header row) to use that as part of the filename that's outputed. I assume it would be better to insert these rows into a temp table then somehow do a search on a specific position in the row...but that's impossible? The other route is to insert each row into a temp table separated out by fields but that is going to be too combursome because we have several formats to determine separation of fields based on the row type so I'd have to create many temp tables and many components in SSIS when all we want to do is again:
1) output each group (broken by each header row) into it's own txt file
2) use a field in the header row as part of the name of the output txt file (e.g. look at the first row, whcih is a header row in flat_file_example. txt. I want to grab the text 'AR10' and use that as part of the filename that I create
Any suggestions on how to approach this whole process in SSIS...the simplest approach that will work ?
I'm sure I'm not the only one frustrated trying to figure out which log file SSRS writes to when an error occurs. Does anybody know a sure way to tell? It doesn't change the date/time of the date modified, so you can't sort by date in windows explorer. There seems to be no rhyme or reason to which file it writes to. For example, I had to go through 6 log files to find which one was being written to. I had thought (hoped) that it would always write to the log files with the latest embedded date/time stamp as part of the file name. It does not.
I'm tempted to start using a file system spy, or resort to other tactics. Does anyone have a sure fired way to see which log file is written to when an error occurs? I'm not talking about SQL Dump files - just "normal" errors when processing reports.
Thanks,
WillyDog
I have a package in which there are only one Data flow Task and it has only three components. 1) Source , which is a SQL db 2) destination and 3) OLE DB Destination flat file Error output file. I want the error file to be created ONLY if there is any error while dumping the data into destination DB. But , the issue is, the error flat file is being created inspite of No error while dumping the data from Source to Destination.
View 5 Replies View RelatedNeed to know how I can get the dynamic filename created in the FlatFile destination for insert into a package audit table?
Scenario: Have created a package that successfully outputs Dynamiclly named flat files { Format: C:Test’Comms_File_’ + ‘User::FileNumber’+’_’+Date +’.txt’
E.g.: Comms_File_1_20150724.txt, Comms_File_2_20150724.txt etc} using Foreach Loop Container :
* Enumerator Set to: “Foreach ADO Enumerator” with the ADO object source variable selected to identify how many total loop iterations there are i.e. Let’s say 4 thus 4 files to be created
*Variable Mappings : added the User::FileNumber – indicates which file number current loop iteration is i.e. 1,2,3,4
For the DataFlow task have a OLDBSource and a FlatFile Destination where Flat File ConnectionString is set up as:
@[User::Output_Path] + "Comms_File"+ @[User:: FileNumber] +"_" + replace((DT_WSTR, 10) (DT_DBDATE) GETDATE(),"-","")+ ".txt"
All this successfully creates these 4 files:
Comms_File_1_20150724.txt, Comms_File_2_20150724.txt, Comms_File_3_20150724.txt, Comms_File_4_20150724.txt
Now the QUESTION is how do I get these filenames as I need to insert them into a DB Audittable. The audit table looks like this:
CREATE TABLE dbo.MMMAudit
(
AuditID INT IDENTITY(1, 1) NOT NULL,
PackageName VARCHAR(100) NULL,
FileName VARCHAR(100) NULL,
LoadTime DATETIME NULL,
NumberofRecords INT NULL
)
To save the Filename & how many records in each file in our Audit Table, am using an Execute SQL Task and configuring it as this:
Execute SQL Task
Parameter mapping - Mapped the User Variable (RecordsInserted) and System Variable( PackageName) to Insert statement as shown below
SQLStatement: INSERT INTO [dbo].[MMMAudit] (
PackageName,NumerofRecords,LoadTime)
(?,?.GETDATE)
Again this all works terrific & populates the dbo.MMMAudit table as shown below BUT I also need to insert the respsctive file name – How do I do that?
AuditID PackageName FileName NumberOfRecords
1 MMM NULL 12
2 MMM NULL 23
3 MMM NULL 14
4 MMM NULL 1
I need find out the number of columns in flat file before i process that particular file.I have file name in @filename variable and file path is @filepath variable.But do not not that how i will check the column name in before i will process that file.
@filePath = C:DatabaseSourceFilesCAHCVSSourceFiles
And i am using for each loop container to read the file one by one and put the file name in @filename variable.and my file name like
Product_20120607060930.txt
Product_20130708060930.txt
[code]....
Now what i have to do is i need to make sure that ID,Name,City,County,Phone is there in flat file.if it is not there then i have to send mail to client saying that file is not valid.I need to also calculate the size of flat file.
What is the easiest way to accomplish this task with SSIS?
Basically I have a stored procedure that unions multiple queries between databases. I need to be able to export this to a text file on a daily basis and add a total records: row to the end of the text file.
Thanks in advance for any help.
Hello Experts,
I am createing one task (user control) in SSIS. I have property grid in my GUI and 2 buttons (OK & Cancle).
PropertyGrid has Properties like SourceConnection, OutputConnection etc....right now I am able to populate Connections in list box next to Source and Output Property.
Now my question to you guys is depending on Source Connection it should read that text file associated with connection manager. After validation it should pick header (first line of text file bases on record type) and write it into new file when task is executed. I have following code for your reference. Please let me know I am going in right direction or not..
What should go here ?
->Under Class A
public override DTSExecResult Execute(Connections connections, VariableDispenser variableDispenser, IDTSComponentEvents componentEvents, IDTSLogging log, object transaction)
{
//Some code to read file and write it into new file
return DTSExecResult.Success;
}
public const string Property_Task = "CustomErrorControl";
public const string Property_SourceConnection = "SourceConnection";
public void LoadFromXML(XmlElement node, IDTSInfoEvents infoEvents)
{
if (node.Name != Property_Task)
{
throw new Exception(String.Format("Invalid task element '{0}' in LoadFromXML.", node.Name));
}
else
{
try
{
_sourceConnectionId = node.Attributes.GetNamedItem(Property_SourceConnection).Value;
}
catch (Exception ex)
{
infoEvents.FireError(0, "LoadFromXML", ex.Message, "", 0);
}
}
}
public void SaveToXML(XmlDocument doc, IDTSInfoEvents infoEvents)
{
try
{
// // Create Task Element
XmlElement taskElement = doc.CreateElement("", Property_Task, "");
doc.AppendChild(taskElement);
// // Save source FileConnection
XmlAttribute sourcefileAttribute = doc.CreateAttribute(Property_SourceConnection);
sourcefileAttribute.Value = _sourceConnectionId;
taskElement.Attributes.Append(sourcefileAttribute);
}
catch (Exception ex)
{
infoEvents.FireError(0, "SaveXML", ex.Message, "", 0);
}
}
In UI Class there is OK Click event.
private void btnOK_Click(object sender, EventArgs e)
{
try
{
_taskHost.Properties[CustomErrorControl.Property_SourceConnection].SetValue(_taskHost, propertyGrid1.Text);
btnOK.DialogResult = DialogResult.OK;
}
catch (Exception ex)
{
Console.WriteLine(ex);
}
#endregion
}
Hi all,
In a foreachloop, I am inserting records into a flat file which is working fine. But the thing is that as the file grows, it takes longer for it to locate the EOF(End of File) of the flat file so as to insert the records.
I have around 70-100 lines written to the file at each loop and there are more than 20k records to be looped. wihich means that at the end I should be having 1400k - 20000k line in the text file.
One solution would be to insert the records at the start of the file itself so that it does not has to lookup the EOF each time before writting.
Another would be to generate separate files and then merge it.
Any idea how can this can be done?
Beside this I have to zip the file and then SFTP to a given address.
Any suggestion or help would be welcome.
Rdgs
David
I have to generate reports in Excel formats.I send the appropriate content type through header() function of PHP.But I can't get the <td> colors when using css sheets.
Following problem occurs:
1. Image doesn't come.
2.<td> does'nt take css style.
Following is the code snippet:
<?php
header("Content-type: application/vnd.ms-excel");
header("Content-disposition: attachment; filename=pareto_combined.xls");
?>
<link href="../../../extra/sheets/SSheet.css" rel="stylesheet" type="text/css">
<tr colspan=8>
<td height=50> <img src='../../../extra/images/log.jpg'></td>
<td align=right><img src='../../../extra/images/mickey_sup.jpg'></td>
</tr>
<?php
$dateF=$_REQUEST['dateF'];
$dateT=$_REQUEST['dateT'];
$agentID=$_REQUEST['agentID'];
?>
<tr>
<td class='graybg'><?php echo $agentID</td>
<td class='graybg'><?php echo $dateF?></td>
<td class='graybg'><?php echo $dateT?></td>
</tr>
Hi,
My situation is:
For example i have txt file called serverlog.txt
txtfile contains:
serverid 3
Last log on 19/3/2007
Linkstatus OK
I have a table created with the following values
Table: serverlog
serverid(primarykey)
LastLogOn
LinkStatus
So my question is how do i get my txt file variables into the sql table.
Is there no import function in SQL?
Ive tried to do it with VB but thats doesnt work.
Greetings Sheila
I am running my package in sql server 2012, in which i am giving network path for flat file destination. And its working fine. But if i give m local path, its giving me error " cannot open data file" ...
Nothing is wrong with package.
Here's a really annoying problem. Let's say you have a text file with 2 million rows.Delimiters all look good and rows are previewed well but the file has a missing row at say lin 1234567 - way deep in the file. When SSIS encounters the blank row, an error is raised and processing on the file STOPS! I verified this in by checking the SSIS log and have even developed an error routine to notify me via email when the error occurs (really cool if I do say so myself ). The main problem still remains - how to resume processing from the point of failure in the file? Any help is appreciated. Thanks.
View 13 Replies View RelatedHow do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better way to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
strSvr = "vkrerftg"
StrDb = "Test_DB"
'connection String
strCon = "Server=" & strSvr & ";database=" & StrDb & "; integrated security=SSPI;"
Dim dbconn As New SqlConnection(strCon)
Dim da As New SqlDataAdapter()
Dim insertComm As New SqlCommand("INSERT INTO [Test_DB_RMS].[dbo].[AIR_Ouput] ([Event], [Year], [Contract Loss],[Company Loss], " & _
"[IndInsured Loss Prop],[IndInsured Loss WC],[Event Info]) " & _
"VALUES (@Event, @Year, @ConLoss, @CompLoss, @IndLossProp, @IndLossWC, @eventsInfo)", dbconn)
insertComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
insertComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
insertComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
insertComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
insertComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
insertComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
insertComm.Parameters.Add("@eventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.InsertCommand = insertComm
Dim upComm As New SqlCommand("UPDATE [Test_DB_RMS].[dbo].[AIR_Ouput] " & _
"SET [Event] = @Event " & _
",[Year] = @Year " & _
",[Contract Loss] = @ConLoss " & _
",[Company Loss] = @CompLoss " & _
",[IndInsured Loss Prop] = @IndLossProp " & _
",[IndInsured Loss WC] = @IndLossWC " & _
",[Event Info] = @EventInfo", dbconn)
upComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
upComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
upComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
upComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
upComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
upComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
upComm.Parameters.Add("@EventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.UpdateCommand = upComm
da.Update(dsAIR, "TextDB")
************* ANY HELP WOULD BE GREATLY APPRECIATED************
THANKS