Waiting For Buffer Latch Error

Jul 20, 2005

Does anybody know what might cause the following message to show up in
the SQL Server Error Log?:

Time out occurred while waiting for buffer latch type 2, bp
0x12260f80, page (5:77914), stat 0x40d, object ID 7:421576540:0,
waittime 500. Continuing to wait.

I've read several articles about what to do about this situation on
SQL Server 2000, but I'm running SQL Server 7.0. Specifically, I'm
running version 7.00.842. Is there a way to resolve this problem
without upgrading to some flavor of SQL Server 2000?

View 2 Replies


ADVERTISEMENT

Time Out Occurred Waiting For Buffer Latch??

Aug 23, 2004

Hi Guys,

One of your SQLSERVER 7, Server throws the below error message into the log file. It won't go away until the server get rebooted. When this error start showing up.. customers have hard time connecting to the Server, eventually we have to reboot the server.

Time out occurred while waiting for buffer latch type 1, bp 0x18b9200, page (1:50859), stat 0xb, object ID 17:1954106002:1, waittime 500. Continuing to wait.

Any help is greatly appericated.

thanks

View 2 Replies View Related

SQL Server 2008 :: Timeout Occurred While Waiting For Buffer Latch

Mar 31, 2015

I am getting below error while executing any SQL query on database server.

Time-out occurred while waiting for buffer latch type 2 for page (20:17937), database ID 13.

There is currently some space issue on the server, so by any chance this space issue is causing this error?

View 2 Replies View Related

MSG 845, Buffer Latch Type 2

Nov 1, 1999

I have been looking at Books Online and I'm trying to figure out how I can resolve this error.

MSG 845, Level 17, State 1
Time out occured while waiting for buffer latch type 2 for page.....


Thanks..

View 1 Replies View Related

Help On Buffer Latch Timeout

Jun 15, 2004

Time out occurred while waiting for buffer latch type 2,bp 0x18b7d40, page 1:11558916), stat 0xb, object ID 9:1842105603:2, EC 0x5862D9C8 : 0, waittime 300. Not continuing to wait.


What does this mean any reason and fix for it..?

Thanks

View 1 Replies View Related

WARNING: EC 259683c0, 0 Waited 32100 Sec. On Latch 807133b0. Not A BUF Latch.

Apr 7, 2004

During a bulk insert I am receiving this error message in the sql log. It appears to have caused the server to reboot the other night..

I am running SQL 2000 8.00.760 (Service Pack 3)

2004-04-07 12:57:52.82 spid8 WARNING: EC 259683c0, 0 waited 32100 sec. on latch 807133b0. Not a BUF latch.
2004-04-07 12:57:52.82 spid8 Waiting for type 0x4, current count 0xa, current owning EC 0x70899570.


Any ideas???

Thanks

Scott

View 2 Replies View Related

Could Not Read And Latch Page (1:1370) With Latch Type SH

Sep 22, 2006

Ben writes "Dbcc checkdb showed a database to have consistency errors, however running repair_allow_data_loss resulted in the following error

Server: Msg 8966, Level 16, State 1, Line 2
Could not read and latch page (1:1370) with latch type SH. sysindexes failed.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.

Please could you tell me how to fix it, and how it occurred in the first place?

Thanks"

View 2 Replies View Related

SSDT Error - Size Necessary To Buffer XML Content Exceeded Buffer Quota

Apr 18, 2012

I encountered the following error while attempting to preview an RDL report I was developing in VS2010 using SSDT:"The size necessary to buffer the XML content exceeded the buffer quota"

View 3 Replies View Related

Error: The Buffer Manager Failed To Create A New Buffer Type

Apr 28, 2006

Hi

I have a master package that executes a series of sub packages run from a SQL Agent job. One of those sub packages has been stable for a week, running at least once per day, but it just failed despite having been run once already today with the same set of input data.

There were a series of errors showing in the event log for the Execute Package Task starting with "Buffer Type 15 had a size of 0 bytes.", then "The buffer manager failed to create a new buffer type.", then "The Data Flow task cannot register a buffer type. The type had 32 columns and was for execution tree 3.", then "The layout failed validation." and finally "Error 0xC0012050 while loading package file "C:[Package].dtsx". Package failed validation from the ExecutePackage task. The package cannot run.".

SQLIS.com reports the constant for the error code as DTS_E_REMOTEPACKAGEVALIDATION ( http://wiki.sqlis.com/default.aspx/SQLISWiki/0xC0012050.html ).

I then ran the package on my dev machine in BIDS and it worked fine, so I re-ran the job on the server and this time that package executed ok, but another one fell over but did not put anything in the event log.

Does any one have any idea what happened?

TIA . . . Ed

View 2 Replies View Related

ADS System Timed Out Waiting For Lock Error

Feb 6, 2007

I am attempting to modify the ADS sample to work with my own application and am running into a snag. I have a simple sqlce database that has two tables in it. I have everything working up until the point where I try to "Pull" the data. At this point in time this is what happens.

1.) I successfully Drop Table1 from the SQLCE database and then Pull "Table1" from the desktop database

2.) When attempting to Pull Table2. It runs the DoesTableExist Function, identifies that the table does exist and therefore tries to run the "DropTable" routine before Pulling the desktop Table2 data. As soon as the sqlCmd.ExecuteNonQuery of the DropTable routine runs I get the following error....

"The system timed out waiting for a lock. [ Session id = 1,Thread id = 1318094114,Process id = 1318068802,Table name = Table2,Conflict type = x lock (s blocks),Resource = DDL ][Table2]"

Of Note...I converted the sample to VB.NET so it's possible something didn't convert right? My guess is that it probably has something to with my SQLCE Database but I haven't the slightest clue where to go from there. Anyone have any ideas what might be going on?

Thanks,

Mike

View 4 Replies View Related

Error 8645---waiting For Memory Resource---urgent Pls

Oct 3, 2000

Hi all,
I am running Sql 7.0 with sp2. I have a memory 4GB. When i am running some batch jobs and replications i am getting following error number:
ERROR NUMBER : 8645
A time out occurred while waiting for memory resources to execute the query. Rerun the query.

Can anyone suggest me how i have to resolve the above error, because i was facing this error very often. Pls suggest me a permanent solution.

Thanks!

--Kavira

View 1 Replies View Related

Agent Starting Error- Waiting To Recover Database

Jun 5, 2002

SQL agent is using NT login with all permission & agent and sqlserver using the same NT username . SA password has not been changed for more than one year.

The SQL Server agent log is showing "waiting to recover database". What could be the reason ?


------------
Ray Miao at 6/5/2002 8:13:38 AM

Double check with sql service manager. Did you change sa pwd?


------------
Shaji at 6/5/2002 4:36:16 AM


Hi ,

Whenever I restart the Server , SQL server service is starting properly, but the agent is showing the green sign in EM ,agent Log also its showing its started. But in EM the jobs are not showing the next run time its showing ( Date and time not available). When I double click the jobs its showing the following error message
Micorsoft SQL - DMO ( ODBC Sql state 42000)
Error 14258 : can not perform this operation while SQL server agent is starting)
FYI :This server contain the databases of SMS too .

Thank you ,
Shaji

View 2 Replies View Related

Reporting Services :: Size Necessary To Buffer XML Content Exceeded Buffer Quota

Oct 7, 2015

We have a set of reports with same header section in all the reports. So while developing a new report i used to copy that header section to the new report with same dataset names (without any change) , but while rendering the report it is throwing error " The size necessary to buffer the XML content exceeded the buffer quota".

View 2 Replies View Related

Error: Value Does Not Fall Within The Expected Range. Error In Buffer.DirectRow Method

Oct 10, 2006

Hi

I am trying to make a custom task. The custom task has one input, which i map to externalmetadata column in the task and one output.

When i run the task it fails with this error ( I am putting the whole SSIS message)

SSIS package "Package.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Data Flow Task, Flat File Destination [1855]: The processing of file "C:ole db eft data.txt" has started.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0047062 at Data Flow Task, Lib [2387]: System.ArgumentException: Value does not fall within the expected range.
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSBuffer90.DirectRow(Int32 hRow, Int32 lOutputID)
at Microsoft.SqlServer.Dts.Pipeline.PipelineBuffer.DirectRow(Int32 outputID)
at Lib1.LibPM.ProcessInput(Int32 inputID, PipelineBuffer buffer)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket)
Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: The ProcessInput method on component "Lib" (2387) failed with error code 0x80070057. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0x80070057.
Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Data Flow Task, Flat File Destination [1855]: The processing of file "C:ole db eft data.txt" has ended.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "Flat File Destination" (1855)" wrote 0 rows.
Task failed: Data Flow Task
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (5) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
----------------------------



This is my piece of code which is trying to put the data in the output buffer (ProcessInput function).

int GoodOutputId = -1;

IDTSInput90 inp = ComponentMetaData.InputCollection.GetObjectByID(inputID);

//GetErrorOutputInfo(ref errorOutputID, ref errorOutputIndex);

GoodOutputId = ComponentMetaData.OutputCollection[0].ID;
System.Console.Write("Here i am");
System.Console.Write(GoodOutputId);
if (!buffer.EndOfRowset)
{
while (buffer.NextRow())
{
if (_inputColumnInfos.Length == 0)
{
buffer.DirectRow(GoodOutputId);
}
else
{
buffer.DirectRow(GoodOutputId);
}
}
}

I have put any code in the else part as i am just trying to run the task as of now and later put the functionality in it.

Please let me know if i have missed something. Thanks in advance.

Vipul

View 1 Replies View Related

Warning - Kept Reference To Buffer - What Can Be Done About These Buffer Warnings?

Mar 6, 2008

Good day everyone,

I'm experiencing a completely random warning from any given row count component within any given data flow task. It occurs sporadically. Whilst distracting, I don't see any adverse effects to the data after the packages complete. Can someone weigh in on this warning and let me know if it is indeed benign or what I maybe able to do to fix it?

Here's the warning:

"A call to the ProcessInput method for input 75997 on component "CNT Rows sent for STG table" (75995) unexpectedly kept a reference to the buffer it was passed. The refcount on that buffer was 4 before the call, and 5 after the call returned."

Thanks,

Langston

View 4 Replies View Related

Buffer Error !! NEED HELP FROM SQL GURU

Nov 20, 2000

Upon running DTS manually to transfer data from Excel into SQL Server, I
get the error:

-----------------------------ERROR OUPTUT ------------------------------------
Error at Source for Row number 264. Errors encountered so far in this task: 1. General error -2147217887 (80040E21).
Data for source column 3 ('Value') is too large for the specified buffer size.
---------------------------END ERROR OUTPUT----------------------------------

*** 'Value' is varchar(4000); largest having length of 1000.
*** The network packet size is 4096.

?? AM I SUPPOSED TO CHANGE THE BUFFER SIZE??

Your kind help is greatly appreciated
Thanks
Ziggy

View 2 Replies View Related

Buffer Size Not Specified Error

Jul 13, 2006

Error: "The specified buffer size is not valid. [buffer size specified = 0]

Hello, im very new to SQL 2005 everywhere but looked like it could do the job for what i needed:

Im working on a c# (.net 2.0) project and loaded data

(one column from one table, 800 rows, text, no greater than 80characters in length)

from an access db into a data set, then lnserted the data in SQLce, great it works fab!

but as soon as I select another field(text, <=10) from the access db, and try to insert it into sql i get the error...

what have i missed???

View 3 Replies View Related

SQL Server 2000 SQL Agent Error [393] Waiting For SQL Server To Recover Databases

Jan 30, 2007

While I was out of the office the Lan Team moved one of my SQL Server2000 servers to a new network domain. Since then the maintenance jobhas not ran.The error log for the SQL Agents has the message listed in the subjectline. I have not found any useful articles on the MS SQL Serversite. Anyone know what might be wrong and how to fix it.HTH -- Mark D Powell --

View 4 Replies View Related

Out Of Memory Error (bUFFER SWAPPING )- SSIS

Feb 27, 2007

HI ,

Need some quick fix Help

I have been
trying to load data from AS400 to DB2 (windows) using ADO.NET connection in
Data reader source and OLEDB Destination (IBM Oledb provider )

The files, I€™m trying to load, have
number of rows more then 15 million.

On execution of the package I get
Out of Memory Error (see below)

My Destination Box is 4GB+ RAM and 4
CPU Box.

There seems to be some Buffer and
Swapping related issue which I€™m not able to figure out. It says that System is
unable to allocate memory

Please help me on the same.

Thanks in Advance

Amit S

SSIS package "ABCDE
1.dtsx" starting.

Information: 0x4004300A at ABCDE
2003 to 2004, DTS.Pipeline: Validation phase is beginning.

Information: 0x4004300A at ABCDE
2003 to 2004, DTS.Pipeline: Validation phase is beginning.

Information: 0x40043006 at ABCDE
2003 to 2004, DTS.Pipeline: Prepare for Execute phase is beginning.

Information: 0x40043007 at ABCDE
2003 to 2004, DTS.Pipeline: Pre-Execute phase is beginning.

Information: 0x4004300C at ABCDE
2003 to 2004, DTS.Pipeline: Execute phase is beginning.

Error: 0xC0202009 at ABCDE
2003 to 2004, OLE DB Destination [12]: An OLE DB error has occurred. Error
code: 0x8007000E.

An OLE DB record is available.
Source: "Microsoft Cursor Engine" Hresult: 0x8007000E Description:
"Out of memory.".

Error: 0xC0047022
at ABCDE 2003 to 2004, DTS.Pipeline: The ProcessInput method on component
"OLE DB Destination" (12) failed with error code 0xC0202009. The
identified component returned an error from the ProcessInput method. The error
is specific to the component, but the error is fatal and will cause the Data
Flow task to stop running.

Error: 0xC0047021 at ABCDE
2003 to 2004, DTS.Pipeline: Thread "WorkThread0" has exited with
error code 0xC0202009.

Error: 0xC02090F5
at ABCDE 2003 to 2004, DataReader Source [61]: The component "DataReader
Source" (61) was unable to process the data.

Error: 0xC0047038 at ABCDE
2003 to 2004, DTS.Pipeline: The PrimeOutput method on component
"DataReader Source" (61) returned error code 0xC02090F5. The
component returned a failure code when the pipeline engine called
PrimeOutput(). The meaning of the failure code is defined by the component, but
the error is fatal and the pipeline stopped executing.

Error: 0xC0047021 at ABCDE
2003 to 2004, DTS.Pipeline: Thread "SourceThread0" has exited with
error code 0xC0047038.

Information: 0x40043008 at ABCDE
2003 to 2004, DTS.Pipeline: Post Execute phase is beginning.

Information: 0x40043009 at ABCDE
2003 to 2004, DTS.Pipeline: Cleanup phase is beginning.

Information: 0x4004300B at ABCDE
2003 to 2004, DTS.Pipeline: "component "OLE DB Destination"
(12)" wrote 289188 rows.

Task failed: ABCDE 2003 to
2004

Warning: 0x80019002 at ABCDE
1: The Execution method succeeded, but the number of errors raised (6) reached
the maximum allowed (1); resulting in failure. This occurs when the number of
errors reaches the number specified in MaximumErrorCount. Change the
MaximumErrorCount or fix the errors.

Executing ExecutePackageTask:
C:Documents and SettingsAdministratorMy DocumentsVisual Studio
2005ProjectsIntegration Services Project1Integration Services Project1ABCDE
2.dtsx

Information: 0x4004300A at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.

Information: 0x4004300A at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.

Information: 0x4004300A at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.

Information: 0x40043006 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Prepare for Execute phase is beginning.

Information: 0x40043007 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Pre-Execute phase is beginning.

Information: 0x4004300C at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Execute phase is beginning.

Information:
0x4004800D at ABCDE 2005_04 to 2005_11, DTS.Pipeline: The buffer manager failed
a memory allocation call for 10484320 bytes, but was unable to swap out any
buffers to relieve memory pressure. 3 buffers were considered and 3 were
locked. Either not enough memory is available to the pipeline because not
enough are installed, other processes were using it, or too many buffers are
locked.

Error: 0xC0047012
at ABCDE 2005_04 to 2005_11, DTS.Pipeline: A buffer failed while allocating
10484320 bytes.

Error: 0xC0047011
at ABCDE 2005_04 to 2005_11, DTS.Pipeline: The system reports 63 percent memory
load. There are 4294660096 bytes of physical memory with 1548783616 bytes free.
There are 2147352576 bytes of virtual memory with 227577856 bytes free. The
paging file has 6268805120 bytes with 3607072768 bytes free.

Error: 0xC02090F5 at ABCDE
2005_04 to 2005_11, DataReader Source [61]: The component "DataReader
Source" (61) was unable to process the data.

Error: 0xC0047038 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: The PrimeOutput method on component
"DataReader Source" (61) returned error code 0xC02090F5. The
component returned a failure code when the pipeline engine called
PrimeOutput(). The meaning of the failure code is defined by the component, but
the error is fatal and the pipeline stopped executing.

Error: 0xC0047021 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Thread "SourceThread0" has exited
with error code 0xC0047038.

Error: 0xC0047039 at ABCDE 2005_04
to 2005_11, DTS.Pipeline: Thread "WorkThread0" received a shutdown
signal and is terminating. The user requested a shutdown, or an error in
another thread is causing the pipeline to shutdown.

Error: 0xC0047021 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Thread "WorkThread0" has exited
with error code 0xC0047039.

Information: 0x40043008 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Post Execute phase is beginning.

Information: 0x40043009 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Cleanup phase is beginning.

Information: 0x4004300B at ABCDE
2005_04 to 2005_11, DTS.Pipeline: "component "OLE DB
Destination" (12)" wrote 0 rows.

Task failed: ABCDE 2005_04 to
2005_11

Warning: 0x80019002 at ABCDE:
The Execution method succeeded, but the number of errors raised (7) reached the
maximum allowed (1); resulting in failure. This occurs when the number of
errors reaches the number specified in MaximumErrorCount. Change the
MaximumErrorCount or fix the errors.

Executing ExecutePackageTask:
C:Documents and SettingsAdministratorMy DocumentsVisual Studio
2005ProjectsIntegration Services Project1Integration Services Project1ABCDE
3.dtsx

Information: 0x4004300A at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.

Information: 0x4004300A at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.

Information: 0x4004300A at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.

Information: 0x40043006 at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Prepare for Execute phase is beginning.

Information: 0x40043007 at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Pre-Execute phase is beginning.

€¦€¦.

€¦€¦€¦€¦

 

View 11 Replies View Related

Memory Fills Up Then A Buffer Error Is Generated.

Jun 22, 2007

I have SSIS sp2 running on a Win2003 64bit Server with 4processors and 16GB of ram. I am trying to load 1 billion rows of data into 10 tables. The source data is found in 12 different 50GB fixed width flat files stored on 2 different files servers. The destination is 10 different tables in a single SQL Server 2000 database which has 1TB of space allocated to it. I use the MS SQL OLE DB connection for each destination table.



The SSIS package is pretty straight forward. Everything takes place in 1 data flow. The 12 sources each flow through 12 different Row Count Transformations into a single Union All Transformation. From the Union All transformation the data goes into another Row Count Transformation then into a Conditional Split Tranformation. The data is split into 10 streams base on the last digit of one of the ID fields in the data. The 10 streams are fed to the 10 destination tables.



Every time I run the package (Start without Debugging) the avaible physical memory goes from around 15GB to 0 in about 2 minutes. The % comitted bytes in use goes from 5% to 100% in about 5 minutes. Once at 100% it will stay there for around 5 minutes before it will finally give me the following error message:



The system reports 98 percent memory load. There are 17178939392 bytes of physical memory with 189382656 bytes free. There are 8796092891136 bytes of virtual memory with 8742748930048 bytes free. The paging file has 54388109312 bytes with 16056320 bytes free.



This message is followed by a bunch of other messages:



SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Union All" (2073) failed with error code 0x8007000E. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.


SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0x8007000E. There may be error messages posted before this with more information on why the thread has exited.
The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.


SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Dr 2" (663) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.


...



SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Dr 3" (898) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.


SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread2" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.



I have tried adjusting the Engine threads down from 5 to 4 to 2. I have tried adjusting the FastLoadMaxInsertCommitSize from 1000000 to 100000 to 1000 (Destinations are tablocked and Check Constraints). I have tried moving the DefaultBufferMax up to 16500 and down to 2000.



Nothing works. The package fails everytime within 20 minutes of its start.



I would prefer not to have to rewrite the package and process each file sequentially as that would take forever.



Any ideas would be greatly appreciated.



Thanks.

-Scott

View 5 Replies View Related

Temp Buffer Error Allocating ######## Bytes

Jan 11, 2008

Hi Guys,
i've found many threds with SSIS buffer errors but non of them seems to work, or have a good solution. i'l explain the story short.

i've got a DB server running on Windows 2003 R2 Enterprise with 10GB RAM 20GB Virtual memory with same spec another machine for the web server.

both machines have "Lock Memory in memory" group policy enabled for


Network Service
System
DomainSQLServiceAccount (in DB server)
and in the DB memory "awe allocation" is also enabled.
both servers have /PAE /3GB switches enabled in boot.ini file

problem: i run all my SSIS packages in the web server through IIS. so the processes are devided between DB and web server. i.e SSIS service is also running in web server.

when i run packages under load (transforming - 200,000 records) i get buffer allocation errors.


A buffer failed while allocating 10485760 bytes.
Error Code = -1073450990
all packages i run i have set the default buffer temp to my web servers e: emp (got 260GB space left). and defaultbuffer size is 10mb with 10,000 defaultbuffermaxrows.

funny this is when it hit 8.33GB (approx 875 files) i get the above error message. it always seems to give me errors after 8.33GB.

Note: all packages run in IIS (w3wp.exe). i'm configuring my new production boxes. the old production with similar envirnment (less speed) work with the same data and packages fine under load.

new production machine got more memory than the old machine but i get memory error (buffer). it doesn't even use up all available physical memory, only about 3gb (max), then start buffering to disk.

any help would be greately appreciated.


i also got



The system reports 31 percent memory load. There are 10734981120 bytes of physical memory with 7326126080 bytes free. There are 3221094400 bytes of virtual memory with 283840512 bytes free. The paging file has 12661686272 bytes with 9633767424 bytes free.Error Code = -1073450991
this was before i increased virtual memory to 20gb(from 4gb).

Any ideas i can try out?

View 4 Replies View Related

SQL Error: 16931 (There Are No Rows In The Current Fetch Buffer)

Sep 15, 2007


Hi,

I am having problem with the CRecorset::Update() function.
I have declared a CRecordset object in client Application in VC++6.0.
I open the recordset in dynamic mode.
Before opening the recordset , I have obtained the UPDLOCK on the base table.( Obviously this UPDLOCK is in transaction).
When I try to call CRecordset::Update() it gives me exception 16931(There are no rows in the current fetch buffer).
I have define a clustered index on this table.
But I still get the exception 16931 on calling CRecorset::Update().

Any help is much appreciated.
Thanks in advance.

View 2 Replies View Related

SSIS ERROR : Overflowed The Disk I/O Buffer, DTS_E_PRIMEOUTPUTFAILED

Nov 1, 2007

Hi,
I get folllwing error while SSIS package is executing and uploading Data from Flat Files to SQL Server 2005. This Error goes away when I change my SSIS Package Connection Manager to read UNICODE data files.
Is there any smart way to figure out which flat files have UniCode Data in the and which is not a Unicode data file.

Thanks,
Vinod


Information: 0x402090DC at Upload EP Data, DAT File Reader [1]: The processing of file "C:Data2EP05PF2000002_070412_002921.dat" has started.
Information: 0x4004300C at Upload EP Data, DTS.Pipeline: Execute phase is beginning.
Error: 0xC020209C at Upload EP Data, DAT File Reader [1]: The column data for column "SYSTEM_LOCKED" overflowed the disk I/O buffer.
Error: 0xC0202091 at Upload EP Data, DAT File Reader [1]: An error occurred while skipping data rows.
Error: 0xC0047038 at Upload EP Data, DTS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "DAT File Reader" (1) returned error code 0xC0202091. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Upload EP Data, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047039 at Upload EP Data, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047021 at Upload EP Data, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Information: 0x40043008 at Upload EP Data, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Upload EP Data, DAT File Reader [1]: The processing of file "C:Data2EP05PF2000002_070412_002921.dat" has ended.

View 13 Replies View Related

Synchronization Error:The Buffer Pool Is Too Small Or There Are Too Many Open Cursors.

Mar 15, 2006

Hello:

I tried to synchronize the SQL 2000 database with the SQL mobile server on PDA with SQL server management studio from SQL 2005. I got the error as €œThe buffer pool is too small or there are too many open cursors. HRESULT 0x80004005 (25101) €?. The SQL database file size is 120MB.

I create the .sdf file on PDA with the following C# code:

string connString = "Data Source='Test.sdf'; max database size = 400; max buffer size = 10000;";
SqlCeEngine engine = new SqlCeEngine(connString);
engine.CreateDatabase();

I think the 400MB max database size and 10000KB max buffer size are big enough to hold that SQL database data and I have already successfully synchronized my PDA with another smaller SQL server database file. I have been kept trying and searching this for couple of days and still can not figure it out.

Moreover, the synchronization always stops at the same table.

Please help and a lot of thanks in advance.

View 1 Replies View Related

DTS Error: Data For Source Column 2 (‘column_name) Is Too Large For The Specified Buffer Size.

Oct 4, 2005

Hi,
 
I’m attempting to use DTS to import data from a Memo field in MS Access (Jet 4.0 OLE DB Provider) into a SQL Server nvarchar(4000) field.  Unfortunately, I’m getting the following error message:
 
Error at Source for Row number 30. Errors encountered so far in this task: 1.
Data for source column 2 (‘Html’) is too large for the specified buffer size.
 
I also get this error message when attempting to import the same data from Excel.
 
Per the MS Knowledgebase article located at http://support.microsoft.com/?kbid=281517, I changed the registry property indicated to 0.  This modification did not help. 
 
Per suggestions in other SQL Server forums, I moved the offending row from row number 30 to row number 1.  This change only resulted in the same error message, but with the row number indicated as “Row number 1â€?.  (Incidentally, the data in this field is greater than 255 characters in every row, so the cause described in the Knowledgebase article doesn’t seem to be my problem).
 
You might also like to know that the data in the Access table was exported into this table from a SQL Server nvarchar(4000) field.
 
Does anybody know what might trigger this error message other than the data being less than 255 characters in the first eight rows (as described in the KB article)?
 
I’ve hit a brick wall, so I’d appreciate any insight.Thanks in advance!

View 9 Replies View Related

Error: 17805, Severity: 20, State: 3 Invalid Buffer Received From Client.

Oct 11, 2004

Howdy Folks,
Our site has been experiencing this issue for a couple of months now.. Hopefully someone else can assist, as I’ve got to a point where I think issue lies within the application or a Microsoft bug. Web searches have reveled a number installations that have also had this error but its has not revealed an actual fix.

I understand this error code basically means data being returned to the client is getting either corrupted or the data is too large to fit into the buffer on the client side. Client in our case is the terminal server, here after called a application server

As the user base has increased form 5 to 20, I have noticed that the issue is occurring more frequently in comparison to when the company first started using the application /database. Its just about daily now...

The db server also has 8 other db's residing on it - but they are all less than 300 meg.

The attached PowerPoint doc has the trace info & the surrounding code for each process that has suffered a buffer error over a period of a week.

DB Server Environment: Win2000 SP4, SQL2000 SP3a, MDAC 2.7 SP1 refresh.
Application Environment: Written In house in VB.NET Framework 1.1 – setup as a published app on a terminal server – running windows 2000 SP4

Common features of the issue, that have been omitted from trace output for visibility reasons are:
-Involves 1 particular DB (thats accessed by VB app) & its developement db
-All connections are coming from 1 application server
-Issue does not relate to any particular site connecting to the application server using this application

I have reviewed & fixed several potential server side causes but this error still is occuring with in the environment:

MDAC versions must be common on application & server:
- Removed from equation by updating MDAC version on App server to be the same as DB Server: 2.7 SP1 Refresh

Network related
- Considered unlikely; we are also not experiencing network card errors on either server; also all db's would be experiencing connectivity errors.

Which leaves us with Application related options to review:
- Compilation error of application
- App parameter definitions to stored procedures are the correct data type
- Ensure values being passed do not exceed 4000 characters as that has also been known to create this error message
- I've asked the developer to review MS KB 827366 article, as it may be a valid test
- In regard to MSKB 832977 - I am not using pssdiag & have a later version of the MS Analyzer. But what I thought was interesting, is the statement that this problem occurs more frequently when an application submits a large remote procedure call (RPC) input buffer, especially when the RPC input buffer is greater than or equal to 8 KB. However, this problem may occur even if the input buffer is less than 4 KB
- A is using datatypes varchar & char - not nvarchar & nhar

Any assistance with this issue would be appreicated as server performance is being effected - these processes hang around for 1 - 5 mins before terminating (refer duration times in the powerpoint traces)

Thanks In advance

Suze.

View 4 Replies View Related

SQL Server 2000 Error 17805 Invalid Buffer Received From Client

Oct 23, 2005

Hi,I've developed an ASP.NET application which uses MS-SQL Server 2000 as abackend. But as the site hits increase SQL server reponse becomes lower.At some stage after that SQL Server gets automativally stopped bringingcomplete web-application down to halt. i checked the Windows 2000 EventLogs and found several error logs indicating folloowing line."SQL Server 2000 Error 17805 Invalid buffer received from client.". Butno errors on UI side. What may be the actual problem.In storedproceduresor at some other place?Awaiting favourble reply.Regards,Amit*** Sent via Developersdex http://www.developersdex.com ***

View 1 Replies View Related

Latch Time

May 14, 2004

Hi All,

This might be a bit of a question like "how long is a peice of string" however here goes.....

What is considered to be a high average latch time?

We have a SQL2000 machine which has:
700-900 ms average latch time
100% Buffer Cache Hit Ratio
No memory pages / second
Very low (almost always below 5%) cpu usage
Next to no disk transfers / sec
0 average lock time

I am surprised that the latch time is so high. Any ideas, whether I should be looking at something in particular?

Cheers in advance.
Troy

View 3 Replies View Related

The Attempt To Add A Row To The Data Flow Task Buffer Failed With Error Code 0x8007000E

Mar 5, 2008



Hi Everyone-

i am facing a memery problem error while i am running the SSIS package
while i am running the package it show the following Error

In Spend Dataload package: A buffer failed while allocating 70485760 bytes.

--------------------------------------------------------------------------------
In Spend Dataload package: The system reports 54 percent memory load. There are 3747647488 bytes of physical memory with 1694883840 bytes free. There are 2147352576 bytes of virtual memory with 1061253120 bytes free. The paging file has 7328251904 bytes with 5083856896 bytes free.

--------------------------------------------------------------------------------
In Spend Dataload package: The attempt to add a row to the Data Flow task buffer failed with error code 0x8007000E.

--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (2718) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.

--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.

--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.

--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.


is there anyone know the solution of that problem and please dont tell me to use extra memery or a hardware solution as this option is not available.

thanx
Maylo

View 5 Replies View Related

SQL 2005 Mobile Edition Error: The Buffer Pool Is Too Small Or There Are Too Many Open Cursors.

Feb 2, 2006

I am working with merge replication. The db server is running Windows 2003 Server Std x64 with SQL 2005 Std x64. The IIS server is running Windows 2003 Server Stx x86. The clients are Windows Mobile 5.0 running SQL 2005 Mobile.

I have previously been able to get the test client to initialize a subscription to the publication. I made some changes recently and added about 7 tables, bringing the total articles to 104. Some of the articles have unpublished columns, which means they are using vertical filtering as well. This publication is also using parameterized filters. During publication creation, there are several warnings that "Warning: column 'rowguid' already exists in the vertical partition".

The snapshot agent runs without any errors. When the client attempts to initialize, I get the error "The buffer pool is too small or there are too many open cursors."

My question is 2 part. First, what is causing this error, and second, how can it be resolved?

View 1 Replies View Related

Causes For Latch Wait Time

Jan 6, 2008

I setup a SQL Agent to send me an email when the Average Latch Wait Time is greater than 300ms. Now I receive an email every 15 seconds stating that the current ALWT is 3916ms. That value never changes with the emails. However, the perfmon shows nothing at all (shows zero).

I also have a Buffer cache hit ratio of 2848.00.

These numbers are when there is NOBODY on the DB at all It is just sitting there. When I reboot the server, as soon as SQL starts it starts to send the emails again.

Server: Intel Xeon Quad Core 2.66
RAM: 4GB (with /3GB in the boot.ini)
RAID 1: OS
RAID 1: Data (DB and logs)
CPU Utilization: 0-1%
RAM Utilization: 527MB
OS: Server 2003 R2 With SP2
SQL: 2005 Standard with SP2

How can I determine if the ALWT is really 3916?

I executed 'Select * from sysprocesses where SPID>50 and waittime>0'

Which showed;

BROKER_RECEIVE_WAITFOR
waittime=110640ms
waittype=0x0075
status=suspended
program_name=DatabaseMail90 - Id<3780>

Any assistance is greatly appreciated.


Thank You

Magnum

View 4 Replies View Related

DBCC CheckDb Latch Errors

Dec 6, 2007

Hi,

we''re currently performing a dry run of migrating some large (100GB+) SQL Server 2000 databases from a SQL 2000 cluster onto a new 2005 mirrorred database pair. The new configuration has completely separate database servers and a new dedicated SAN.

Upon restoring our largest database we are seeing the following errors recorded in the log after setting up mirroring and then trying to run DBCC CHECKDB:

"Unable to read and latch page (1:1323852) with latch type SH. 21(The device is not ready.) failed."

We are currently investigating the SAN hardware logs to determine if this might be a physical issue as it would seem to indicate, however has anyone any experience of this or insight into what may cause this error?

Thanks in advance!

View 3 Replies View Related

Recovering Data From Broken Tables (latch Errors)

Sep 21, 2007

Hi!

Is it possible to generate a script, that extracts every bit of data it can, from tables which suffers from latch errors;

DBCC CHECKDB ->
Msg 7985, Level 16, State 2, Line 1

System table pre-checks: Object ID 4. Could not read and latch page (1:403) with latch type SH. Check statement terminated due to unrepairable error.

So bad news on that one. There are no backup available that I know off, so all bets are off on that part of the recovery process.

The "good news" part of the problem, is that it is possible to extract some data out of the table, before SQL server 2005 returns the error. So what I want to do, is get every bit out I can, doing it somehow automatically, so I don't have to run bcp on 180 tables :).

Presumeably, this is quite possible, but how?

NB. If I do a complete basic SELECT * FROM tbl1, it returns data, then errors out, but what about the data after the last row SELECT returns? Is it possible, that there might be data in the table that are recoverable after the 'broken row(s)'?

View 20 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved