SQL 2005 Dev
How can I do this with Parameters? I can get a single parameter to filter for a single date (or even a combo list of the dates in DB). But I want my parameters to interact so that they specify a range. Is this possible?
I want to pull dates from my database that are between to set dates i have written a query that does this which looks like this:
"SELECT OCH_ID, empno, Selected_OCD, Start_Time, End_Time, Selected_OCDay, Selected_DOM, Selected_Month, Selected_Year FROM dbo.ICT_On_Call_Hours WHERE (CONVERT (datetime, LEFT (Selected_OCD, 2) + '/' + SUBSTRING(Selected_OCD, 4, 2) + '/' + RIGHT (Selected_OCD, 4)) >= CONVERT (datetime, LEFT ('12/02/2007', 2) + '/' + SUBSTRING('12/02/2007', 4, 2) + '/' + RIGHT ('12/02/2007', 4))) AND (CONVERT (datetime, LEFT (Selected_OCD, 2) + '/' + SUBSTRING(Selected_OCD, 4, 2) + '/' + RIGHT (Selected_OCD, 4)) < CONVERT (datetime, LEFT ('14/02/2007', 2) + '/' + SUBSTRING('14/02/2007', 4, 2) + '/' + RIGHT ('14/02/2007', 4)))"
This works when the dates are included in the statement but when i try and use parameters to pull them in like this:
"SELECT OCH_ID, empno, Selected_OCD, Start_Time, End_Time, Selected_OCDay, Selected_DOM, Selected_Month, Selected_Year FROM dbo.ICT_On_Call_Hours WHERE (CONVERT (datetime, LEFT (Selected_OCD, 2) + '/' + SUBSTRING(Selected_OCD, 4, 2) + '/' + RIGHT (Selected_OCD, 4)) >= CONVERT (datetime, LEFT ('@Choice1', 2) + '/' + SUBSTRING('@Choice1', 4, 2) + '/' + RIGHT ('@Choice1', 4))) AND (CONVERT (datetime, LEFT (Selected_OCD, 2) + '/' + SUBSTRING(Selected_OCD, 4, 2) + '/' + RIGHT (Selected_OCD, 4)) < CONVERT (datetime, LEFT ('@Choice2', 2) + '/' + SUBSTRING('@Choice2', 4, 2) + '/' + RIGHT ('@Choice2', 4)))"
I then recieve the following error message why is this?
ERROR -------------------> Syntax error converting datetime from character string.
Any Help would be greatly appreciated thanks
Hello,
My basic goal is to try to simplify inputs for the user. I have 3 parameters: Begin Date, End DAte and Duration. Duration will contain 3 choices: All, 2 Years and Range and is meant to give them a shortcut to dates as described below:
All - Would automatically populate the start date to 10/01/2005 and an end date to current date
2 Years - Would automatically populate the start date to current date minus 2 years, and the end date to current date.
Range - Would allow the user to select any dates as desired.
I'm able to get the dates to populate based on the duration field using non-queried values based on the Duration value, but the problem is that if I want to allow them to select Range the calendar control is not available and a text box is displayed.
I've tried to create some code in the properties that would populate, but I keep getting that this item is Read Only. The code I've created is as follows:
public function populateDates(Duration) as String
Select Case Duration
Case = "Range"
Report.Parameters!pBeginDate = Report.Parameters!pBeginDate
Report.Parameters!pEndDAte = Report.Parameters!pEndDAte
Case = "All"
Report.Parameters!pBeginDate = #10/01/2005#
Report.Parameters!pEndDAte = Now().Today
case = "Two"
Report.Parameters!pBeginDate = DateAdd("yyyy", -2, Now().Today)
Report.Parameters!pEndDAte = Now().Today
end select
end sub
My only goal is to give the User the 3 choices, but still keep the calendar control available, and I can't seem to do this?
suggestion please!
Thanks!
Maureen
How to write sql query that will filter between two dates (user input in text box1 and text box2) in the below sql statement .
SELECT 'Table1' AS [Table], SUM(a) - SUM(b) AS Result FROM table1 UNION ALL SELECT 'Table2', SUM(a) - SUM(b) FROM table2 UNION ALL SELECT 'Table3', SUM(a) - SUM(b) FROM table3
I want to filter a table for data between two dates.
Start Date and End Date are the two dates.
The query,
1. should not filter based on date if the dates are not provided.
2. Should give all records on or after the start date if only the start date is given.
3.Should give all records on or before the end date if only the end date is given.
4. Should give all records on or between the start and end dates if both dates are given.
I tried something like this.
@startDate datetime =NULL ,
@endDate datetime = NULL
AS
BEGINSET NOCOUNT ON;
SELECT * FROM TABLE
WHERE ((TICKET.CREATED_DATE >=@startDate AND TICKET.CREATED_DATE<=@endDate ) OR (@startDate IS NULL)OR (@endDate IS NULL)OR(@startDate IS NULL AND @endDate IS NULL))
Not working could someone give me the correct query.
Thanks
i want to filter the data on specified dates. (between dates).
SELECT a.UserID, b.Name, b.EmployeeNum,b.Department, MIN(a.TransactionTime) AS TransactionTime,a.TransactionTime as TR_Date,
min(CONVERT(CHAR(20), TransactionTime, 113)) As TransactionDateTime
FROM NitgenAccessManager.dbo.NGAC_AUTHLOG AS a INNER JOIN NitgenAccessManager.dbo.NGAC_USERINFO AS b
ON a.UserID = b.ID
WHERE (a.FunctionKey = ' ')
[code]...
I am facing an issue in TABLIX FILTER . I have a table having a column with dates like
01Feb2015
03Jun2014
I need to add a filter in SSRS tablix to get the dates < 01Mar2015
How can I add it in tablix filter as if i directly use my column name and filter value as 01Mar2015 it is not giving results
Secondly, I have another column with date like : 2015-02-04 00:00:00.000
I need to filter the same in another tablix for dates < 01-Mar-2015
I tried this in expression to convert it into string
=Format(Fields!Last_Date.Value, "YYYY-MM-DD")
And used 2015-03-01 in filter but it did not work
If I dont use format, ssrs gives error that tablix cannot compare datetime and string...
I need a Query for calculating the fiscal_week based on the input dates (start_date and end_date), though I got a query from this forum, it is not giving me exact result.
the sample is in the excel file with the attachment.
In the excel:
First tab tells you the raw_data what I am using to find the Fiscal_week
Second tab tell you the data where i found the mistake, and how I am expecting the output.
I also have attached the query I have got from this forum, query I have modified for fiscal week.
Today I have got one scenario to calculate the (sum of days difference minus(-) the dates if the same date is appearing both in assgn_dtm and complet_dtm)/* Here goes the table schema and sample data */
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[temp_tbl]') AND type in (N'U'))
DROP TABLE [dbo].[temp_tbl]
GO
CREATE TABLE [dbo].[temp_tbl](
[tbl_id] [bigint] NULL,
[cs_id] [int] NOT NULL,
[USERID] [int] NOT NULL,
[code]....
I have a sqlDataSource control that has its select command and parameters set dynamically. One of the parameters is a date, which should be in smalldatetime format (ie, 12/22/2006). Obviously, using SQL Server, the data is stored with both date and time. The problem is, I cannot get any data selected. I initially thought that I needed to tell it to only look at the date and not the time, but from what I have seen this should work. Here is the pertinent code.
dim seldate as datetime
selDate = Session("ChosenDate")
Dim SelCmd As String = "SELECT [PatientName], [AssignedTo], [CPT], [CPT2], [HospitalID], [RoomNbr], [ACType], [TxDx1], [TxDx2], [MRNbr], [Notes], [PatientID], [PCPID], [ResidentID], [Status], [CaseID], [AdmitDate], [crtd_datetime] FROM [DailyBilling] WHERE ([crtd_datetime] = @crtd_datetime) and ([AssignedTo] = @AssignedTo) and ([HospitalID] = @HospitalID) ORDER BY [PatientName]"
SqlDataSource1.SelectCommand = SelCmd
SqlDataSource1.SelectParameters.Clear()
Dim parFilterProvider As New ControlParameter()
parFilterProvider.ControlID = "ddlProvider"
parFilterProvider.Name = "AssignedTo"
parFilterProvider.Type = TypeCode.String
SqlDataSource1.SelectParameters.Add(parFilterProvider)
Dim parFilterHospital As New ControlParameter()
parFilterHospital.ControlID = "ddlHospitals"
parFilterHospital.Name = "HospitalID"
parFilterHospital.Type = TypeCode.String
SqlDataSource1.SelectParameters.Add(parFilterHospital)
Dim parFilterStatus As New Parameter()
parFilterStatus.Name = "crtd_datetime"
parFilterStatus.DefaultValue = selDate.ToShortDateString
parFilterStatus.Type = TypeCode.DateTime
SqlDataSource1.SelectParameters.Add(parFilterStatus)
Gridview1.databind()
Any ideas?
I have a table that has hotel guests and their start stay date and end stay date, i would like to insert into a new table the original information + add all days in between.
CREATE TABLE hotel_guests
(
[guest_name] [varchar](25) NULL,
[start_date] [date] NULL,
[end_date] [date] NULL,
[comment] [varchar](255) NULL
[code]...
Hello Everyone and Merry Christmas
I have a question I need my users to be able to enter a between statement into an Edit Parameters form I have created for them. The reason being is so that they can find out when employees are due for a renewal (which is every two years from their final suit date..for example if their final was done on 12/01/2006 then they would be due to renew 12/31/2008).
The code below allows them to look up final suit dates of individuals. I would like them to look up Renewals based on final suits. like: BETWEEN 12/01/2006 AND 12/31/2006. and get the results, does that make sense???
SELECT TM#, LASTNAME, FIRSTNAME, CONDITIONAL, DATEOFCONDITIONAL, FINALSUITDONE
FROM dbo.EmployeeGamingLicense
WHERE (FINALSUITDONE = @Enter_FINALSUITDONE)
I've gotten sort of fed up with dealing with regional date settings onthe client side and am considering the following scheme - justwondering if anyone has a negative view of it or not:Instead of@StartDate datetime,@EndDate datetimeUse:@StartDaysDiff int,@EndDaysDiff intIn the front end app take the desired date and do a DATEDIFF with thecurrent date, then pass the date diff as a parameter as an integerrather than deal with the dates at all.Then...DECLARE @TodayDate datetime, @StartDate datetime, @EndDate datetimeSELECT @TodayDate = GETDATE()SELECT @StartDate = DATEDIFF(DAY,@StartDaysDiff,@TodayDate)SELECT @EndDate = DATEDIFF(DAY,@EndDaysDiff,@TodayDate)SELECTa.SomethingFROMdbo.Appointments aWHEREa.AppointmentDate BETWEEN @StartDate and @EndDateJust wondering ...Thanks,lq
View 9 Replies View RelatedHi,
I am having the "classical problem" of the forums; A local date changed to the american format (normally in the development environment) which I call "Switching months with days"... well it switches both again if you press "view report" again :)The problem I'm having is that when I Navigate from one report to other, the dates get switched... Everything's been set in the locale uk date format (dd/mm/aaaa), in the operating system, in the database and in the reports... and the reports are working properly through the web interface.. the only thing that is not working properly is the Navigation which switches the date month with the day...Changing all the Reporting Services server, database server to the american format date is not an acceptable solution. Thanks for any guidance on this, as I'm pretty lost...Jose
I want to know if there is a way to compare dates in the sql statement with dates that I input into a database and todays date. the datatype that I'm using is smalldatetime.The statement I used is:Select Date from Table where Date > 'Today.now'I get an errorCould this be done or is there another approach?
View 1 Replies View RelatedHello!
I've begin to do a tutorial of this site: Working with Data in ASP.NET 2.0 c#, but in the 3. step I can't make something:
In this step I can't add parameterized methods to the TableAdapter. The problem come up when I want to add Sql query.
SELECT ProductID, ProductName, SupplierID, CategoryID, QuantityPerUnit, UnitPrice, UnitsInStock, UnitsOnOrder, ReorderLevel, DiscontinuedFROM ProductsWHERE CategoryID = @CategoryID
The error message:
Error in WHERE clause near '@'.Unable to parse query text.
So, how can i use parameter in this method?
tnx for the help
Simpson
Is it possible in Reporting Services to prompt a user for dates that can then be used to do calculations?
On my SSRS report, I use a date parameter to let the user select a date with the little calendar tool. When a date is selected, I have a small bit of coding run to convert the date to text, because when the report first fires up, the field is populated with "1/1/1900," and I need that turned into a blank character to let the report pull up all rows. So far, all well and good.If someone picks a date, then the report will filter the data on that selected date. Works fine.
But, it appears there is no way to get the calendar tool to go back to allowing ALL dates - so that all records are pulled - except by manually typing in, or selecting it with the tool, 1/1/1900.If I try to clear the field, causing it to use '' as a WHERE criteria (WHERE AdmitDate LIKE '%' + @AdmitDateTxt + '%'), it repopulates the field with the last selected date. So, I guess the question is, how does one tell the calendar tool for picking dates for a date parameter to reset back such that all records are pulled, not just those for a single date, without being required to type in, 1/1/1900? Or, is there some way of telling the date parameter to select all dates?
Hello,
We are using ReportServer URL Access. The parameters aren't pass into the URL, they have a default value and it's possible to change them by the "parameter toolbar". We are using datetime parameters with the very usefull calendar...
We are using a French version of : Windows (XP or W2K3), SQL2005+SP1 and VS2005 + SP1. It works fine, the calendar (for datetime parameter) is in French.
After installing the French SP2, the calendar is in English (w2k3 + VS2005 SP1). On a new installation (XP), with SQLExpress SP2 Advanced + Toolkit (in French), we have the same problem.
With this URL (solution 1), the calendar is in English (it was in French before the SP2):
http://localhost/Reportserver$SQLExpress?%2fProjet+de+rapport1%2fReport1&rs:Command=Render
But with this URL (solution 2), the calendar is in French :
http://localhost/ReportServer$SQLExpress/Pages/ReportViewer.aspx?%2fProjet+de+rapport1%2fReport1&rs%3aCommand=Render
In the documentation, we have to use solution 1 (but we have a problem). Is the solution 2 a possible "alternative" ?
Thanks for your help,
Frederic
To set the scene I am using SQL 2012, in project deployment mode (SSIS Catalog rather than file system).I have setup an SSIS package to run a stored procedure which exports data for the last hour to a .tsv file and then FTP's the file to some other location via a sql agent job - This all works fine.However, I can see there may be a requirement to run the package with dates that need to be set i.e. in the event of a lost file of some other reason the package has not run and missed some of its hourly slots and the customer requires the files to be resent.
The stored procedure I am using has parameters for "DateOverride" - boolean), "start" and "end" dates (datetime) with defaults set "0" for "DateOverride" and null for the "Start" and "End" dates, I have built logic into the procedure which sets the dates if the parameters are null (as in the above to an hour before now). What I would like to be able to do (and this is to make it user friendly for support staff) is to be able to set parameters/variables in SQL agent with "DateOverride" set to "1" and the the dates I would like to be sent to the stored procedure "Start" and "End" parameters.
I did try using the parameters in SSIS which worked well when the values were true or false (0,1) but didn't work at all for the dates. If I left the dates as I had set them is SSIS it worked, but if I changed them (even if it was just changing the hour) the job errored/crashed and corrupted the job step leaving me the ability to only delete it.
I have a report that uses several filters including a from and to date filter, I have a field named TimeLastMod which is a Timestamp. I am extracting the From and To dates from this field using Select format(TimeLastMod,'MMM') as FromMonth,format(TimeLastMod,'MMM') as ToMonth From Eventlogs syntax.
These I pass on to a parameter and eventually to a tablix filter in an between opeartion. When I run the report, the records returned by the report is not what is expected as it sometimes returns an extra months data e.g., using between Aug and Sept will return october data as well.
Hi,
I am trying to make a simple stored procedure which I want to take input on every run from end user:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
declare @sku varchar(20)
insert into skua (sku,SumOfQtyNum)
(select sku,sumofqtynum from sku where @sku = sku.sku)
it is working but not asking parameter values
(I want to use passthrough query after that in Access)
thanks
AA
Hi,
I have a table which records employees'time-off records. There are 6 columns in this TimeOff table. They are RequestID, EmpName, StartDate, EndDate, Type, NumofDays. I have another table which has all the dates from 01/01/1950 to 01/01/2056.
I am trying write a query which lists all the dates between the timeoff startdate and enddate, including the the start and end dates, but my query so far only lists the start and end date in a timeoff record:
SELECT D.[Date], Datename(dw,D.[Date]) AS Weekday
FROM Dates D LEFT JOIN TimeOff T ON D.[Date] = T.OffStartDate OR D.[Date] = T.OffEndDate
WHERE (OffType = 'Sick Day' AND EmpName = 'Cat White') AND (D.[Date] BETWEEN T.StartDate AND T.EndDate)
Any advice will be greatly appreciated!
Has anyone ever written a function to retrieve all individual dates between two given dates? Using DATEDIFF I can get the number of days between two dates. However I need to iterate through the days to identify weekend and holiday dates. Has anyone ever written a function to do this?
So, if select datediff(d,'07/01/2007','07/15/2007') as NumOfDays returns 14, I'd need to iterate through the 14 days and get the weekends and holidays. Would I have to use a cursor to iterate through the days?
I'm using Cube.My DimDate tables Datekey is integer .But client wants a calendar to set date as you see in picture .how can I change calendar value which will be input by user.
View 3 Replies View Related
I'm trying to generate this query, that displays Budget Current Year , Actual Current Year and Prior Year Revenue. When It comes to the Budget and Actual everything works fine, however when I try to add the query for the Prior Year I get an error, and I realized that the leap date is causing the error
Here is what I'm trying to generate
InnCodeID
Quarterly
Monthly
Days
Period
Year
BARmRev
AARmRev
PYRmRev
ADDIS
Q1
Jan
1
1
2008
NULL
NULL
ADDIS
Q1
Jan
1
1
2008
3462.14
5107.65
ADDIS
Q1
Jan
1
1
2008
NULL
NULL
ADDIS
Q1
Jan
1
1
2008
NULL
NULL
Here is the error that I'm getting:
Code Snippet
Msg 242, Level 16, State 3, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
(4834 row(s) affected)
Here is my Transact-SQL Syntax (summarized because I Couldn't post it):
SELECT
(CASE WHEN (CASE WHEN dbo.Trans.Tr_Dept = '10' AND dbo.Trans.TR_Main = '5120' AND dbo.Trans.tR_sub = '01'
AND Year(dbo.Trans.TR_Date) = Year(dbo.CurrentDate.CurrDate) AND dbo.trans.Datatype = '1'
THEN dbo.trans.Tr_Amount ELSE NULL END) IS NOT NULL THEN
(SELECT Trans1.TR_Amount
FROM dbo.Trans Trans1
WHERE Trans1.TR_Dept = '10' AND TR_Main = '5120' AND TR_Sub = '01' AND trans1.TR_Date = CAST((CAST(Month(dbo.Trans.TR_Date)
AS varchar(2)) + '/' + CAST(Day(dbo.Trans.TR_Date) AS varchar(2)) + '/' + CAST(Year(dbo.CurrentDate.CurrDate) AS varchar(4))) AS datetime)
AND Trans1.TR_Entity = dbo.Trans.TR_Entity AND trans1.datatype = dbo.Trans.DataType) ELSE NULL END) * - 1 AS BARmRev,
--AA Script Here AS AARmRev,
(CASE WHEN (CASE WHEN dbo.Trans.Tr_Dept = '10' AND dbo.Trans.TR_Main = '5120' AND dbo.Trans.tR_sub = '01' AND Year(dbo.Trans.TR_Date)
= Year(dbo.CurrentDate.CurrDate) AND dbo.trans.Datatype = '1' THEN dbo.trans.Tr_Amount ELSE NULL END) IS NOT NULL THEN
(SELECT SUM(Trans1.TR_Amount)
FROM dbo.Trans Trans1
WHERE RIGHT(RTRIM(Trans1.TR_Dept), 2) = '10' AND Trans1.TR_Main = '5120' AND Trans1.TR_Sub NOT BETWEEN '04' AND '05' AND
trans1.TR_Date = CAST((CAST(Month(dbo.Trans.TR_Date) AS varchar(2)) + '/' + CAST(Day(dbo.Trans.TR_Date) AS varchar(2))
+ '/' + CAST(Year(dbo.CurrentDate.CurrDate)-1 AS varchar(4))) AS datetime) AND Trans1.TR_Entity = dbo.Trans.TR_Entity AND
trans1.datatype = '0') ELSE NULL END) * - 1 AS PYRmRev
FROM dbo.EntityDef INNER JOIN
dbo.Trans ON dbo.EntityDef.ED_Property_ID = dbo.Trans.TR_Entity INNER JOIN
dbo.CurrentDate INNER JOIN
dbo.DimTime ON YEAR(dbo.DimTime.TimeDate) = YEAR(dbo.CurrentDate.CurrDate) ON dbo.Trans.TR_Date = dbo.DimTime.TimeDate
WHERE (dbo.EntityDef.ED_Property_ID = 'ADDIS')
ORDER BY dbo.EntityDef.ED_Property_ID, dbo.DimTime.TimeDate
I appreciate all your help
Thanks
This is probably a simple question but i am trying to create a simple function thatfilters sql input. Is the following syntax correct?
Public Shared Function SafeSql(ByVal firstName As String, ByVal lastName As String) As String firstName.Replace("'", "''") lastName.Replace("'", "''")
End Function
many thanks
martin
I have a stored procedure which takes an input parm and is supposed to return an output parameter named NewRetVal. I have tested the proc from Query Analyzer and it works fine, however when I run the ASP code and do a quickwatch I see that the parm is being switched to an input parm instead of the output parm I have it defined as...any ideas why this is happening? The update portion works fine, it is the Delete proc that I am having the problems... ASP Code...<asp:SqlDataSource ID="SqlDS_Form" runat="server" ConnectionString="<%$ ConnectionStrings:PTNConnectionString %>" SelectCommand="PTN_sp_getFormDD" SelectCommandType="StoredProcedure" OldValuesParameterFormatString="original_{0}" UpdateCommand="PTN_sp_Form_Update" UpdateCommandType="StoredProcedure" OnUpdated="SqlDS_Form_Updated" OnUpdating="SqlDS_Form_Updating" DeleteCommand="PTN_sp_Form_Del" DeleteCommandType="StoredProcedure" OnDeleting="SqlDS_Form_Updating" OnDeleted="SqlDS_Form_Deleted"><UpdateParameters><asp:ControlParameter ControlID="GridView1" Name="DescID" PropertyName="SelectedValue" Type="Int32" /><asp:ControlParameter ControlID="GridView1" Name="FormNum" PropertyName="SelectedValue" Type="String" /><asp:Parameter Name="original_FormNum" Type="String" /><asp:Parameter Direction="InputOutput" size="25" Name="RetVal" Type="String" /></UpdateParameters><DeleteParameters><asp:Parameter Name="original_FormNum" Type="String" /><asp:Parameter Direction="InputOutput" Size="1" Name="NewRetVal" Type="Int16" /></DeleteParameters></asp:SqlDataSource>Code Behind:protected void SqlDS_Form_Deleted(object sender, SqlDataSourceStatusEventArgs e){ if (e.Exception == null) { string strRetVal = (String)e.Command.Parameters["@NewRetVal"].Value.ToString(); ............................Stored Procedure:CREATE PROCEDURE [dbo].[PTN_sp_Form_Del] (
@original_FormNum nvarchar(20),
@NewRetVal INT OUTPUT )
AS
SET NOCOUNT ON
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
DECLARE @stoptrans varchar(5), @AvailFound int, @AssignedFound int
Set @stoptrans = 'NO'
/* ---------------------- Search PART #1 ----------------------------------------------------- */
SET @AvailFound = ( SELECT COUNT(*) FROM dbo.AvailableNumber WHERE dbo.AvailableNumber.FormNum = @original_FormNum )
SET @AssignedFound = ( SELECT COUNT(*) FROM dbo.AssignedNumber WHERE dbo.AssignedNumber.FormNum=@original_FormNum )
IF @AvailFound > 0 OR @AssignedFound > 0 /* It is ok if no rows found on available table, continue on to Assigned table, otherwise stop the deletion.*/
-----This means the delete can't happen...........
BEGIN
IF @AssignedFound > 0 AND @AvailFound = 0
BEGIN
SET @NewRetVal = 1
END
IF @AssignedFound > 0 AND @AvailFound > 0
BEGIN
SET @NewRetVal = 2
END
IF @AssignedFound = 0 AND @AvailFound > 0
BEGIN
SET @NewRetVal = 3
END
END
ELSE
BEGIN
DELETE FROM dbo.Form
WHERE dbo.Form.FormNum=@original_FormNum
SET @NewRetVal = 0
---Successful deletion
END
GO
-------------------------------------------------------- When I go into the debug mode and do a quickwatch, the NewRetVal is showing as string input.
Hello All,
I am trying to Add certain number of days to a particular date.
and my requirement is that it need to exclude all saturdays and sundays and then give me the resultant date in Sqlserver.
Please can anyone help me in achieving it.
thanks
Shiva Kumar
Hi can anyone help me , or am I on the wrong track.
Is there any easy way to create a stored procedure that inserts into a table the relevant months dates into a table based on the month and year as parameters.
I.e say the parameters passed are 01/2001 hence based on this all of the month of January 2001 dates are inserted into a table in this format : 'Jan 01 2001 12:00:00'
Thanks
OK, so I can return (& therefore use) the last day of last month using
select (GETDATE()- DATEPART ( dd , GETDATE()))
Which returns 31-03-2004 (dd-mm-yyyy)
Has anyone a good way of determining a way of deriving say a date such as 01-01-2004 (1st Jan)....
I'd like to get some data where my dmd.sdate falls always in the previous quarter.. but would like it to be not hard coded...
Currently I have
SELECT cust.no,
cust.surname,
dmd.csan,
dmd.sdate
FROM pdunity.dbo.cust cust,
pdunity.dbo.dmd dmd
WHERE cust.rowno = dmd.rowno_custdmd_cust
AND(dmd.sdate
BETWEEN '01/01/2004'
AND(GETDATE()- DATEPART ( dd , GETDATE())))
ORDER by dmd.sdate asc
Is there some form of function I can use to return 01/01/2004 automatically ?
Will
why does this sql return the dates in different formats? Is it a default setting on the server or do i just handle it on SQL?
use northwind
select top 20 orderdate from orders
select top 20 left(orderdate,10) from orders
thanks
fatherjack
We are deploying a system in the UK in SQL Server 6.5. They want the date to default to dd/mm/yy. Is there a way to set this on a permanent basis? Is there a way to set the server so any time a date is display, including getdate(), the result is dd/mm/yy?
View 2 Replies View Related