Warning Message In The Event Viewer
Jun 7, 2001
Hi
Can anyone tell me what this warning message in the Quotes below...
I get this on one of our servers every 15 minutes in the event Viewer..
Here is the message in the event Viewer..
"Replication of license information failed because the License Logging Service on server PSNJRPDC could not be contacted."
Thanks All,
Venu
View 1 Replies
ADVERTISEMENT
Mar 6, 2001
Hi All,
I see this error message on one of my servers Event Viewer..Can anyon tell me what it means and how to resolve it..
The library file "C:WINNTSystem32BEPerfDll.dll" specified for the "Backup Exec" service could not be opened. Performance data for this service will not be available. Status code is data DWORD 0.
Thanks,
Venu
View 1 Replies
View Related
May 1, 2007
Hello,
I have been trying to drill down to the cause for this event log message:
"The configuration of the AdminConnectionTCP protocol in the SQL instance
SQLEXPRESS is not valid."
It is reported from the SQLBrowser service as a warning when the service
starts. I have tried starting SQLBrowser.exe with -c flag, but the output reveals no
errors. I have seen this error on three computers. Two are running SQL 2000, 2005
and Express. One was only running Express, but still this message.
I then looked into the log for the SQL Express server itself. It shows this
message on startup:
"Dedicated administrator connection support was not started because it is
not available on this edition of SQL Server. This is an informational message
only. No user action is required."
Now, it appears to me that these two messages may relate to the same
"error" (or rather behaviour by design). So, can anyone confirm that the
warning in the event log from the SQL Browser service occurs becuase of that
the SQL Express edition doesn't allow any "AdminConnection", but the SQL
Browser service isn't aware of that SQL Express edition shouldn't support that, and
reports it as a warning (implying that we can't do much about this warning)?
Thanks for any input on this issue!
View 5 Replies
View Related
Sep 12, 2005
How do I prevent SQL Server 2000 from posting successful backupcompletion messages to the Windows 2000 Application Event Log?I have scheduled jobs which backup my transaction logs on 50+ databasesand it always writes to the Windows 2000 application event log uponcompletion.Due to the frequency of the jobs it only takes a day for theApplication Log to fill up, which is causing other jobs to get hung upwhen trying to write to it. On my Windows 2000 server, I have theapplication log event viewer setting correctly set as:"When maximum log size is reached - Overwrite events as needed" but forsome reason this setting no longer applies like it did for the pastthree years. SQLServerAgent and MSSQLSERVER both run under a localAdmin account, without a domain.When I researched how prevent SQL Server from logging this type ofmessage, I found that I can use sp_update_alert to disable thismessage, but I cannot findthe message_id to correctly disable this message. In sysmessages, themessage I am trying to suppress iserror:18265severity:10dlevel:128description:Log backed up: Database:%1, creation date(time): %2(%3), first LSN: %4, last LSN: %5, number ofdump devices: %7!d!, device information: (%8).mslangid:1033I tried calling sp_update_alert as follows:exec sp_update_alert @name = 'Log backed up: Database: %1, creationdate(time): %2(%3), first LSN: %4, last LSN: %5, number of dumpdevices: %7!d!, device information: (%8).', @enabled = 0but got the error message:Server: Msg 14262, Level 16, State 1, Procedure sp_update_alert, Line105The specified @name ('Log backed up: Database: %1, creation date(time):%2(%3), first LSN: %4, last LSN: %5, number of dump devices: %7!d!,device inf') does not exist.Looks like it can only handle 128 characters.How can I disable this message from being logged in the ApplicationLog? Or alternatively, how can I get the event viewer to behave asexpected and"Overwrite events as needed"?Thanks,Mike Orlando
View 9 Replies
View Related
Jun 15, 2007
Hello,
I have almost finished to design my Service Broker application and I found out something strange.
I was tring to handle the Target queue disabled scenario, because I want to save to message that was not sent so I can create an alert to the user to say that some messages as not been sent.
To disable to queue I run:
Alter queue [dbo].[Receivedqueue] with status = off
I had the Event Viewer in front of me and I have seen the suddenly it appeared a lot of this informational events:
Event Type: Information
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 9724
Date: 15/06/2007
Time: 15:00:47
Description:
The activated proc [dbo].[OnReceived] running on queue TestReceiver.dbo.Receivedqueue output the following: 'The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction.'
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
What this message means?
I would like to avoid to have it because it appears a lot of time and I don't want to fill up my Event Viewer!!
I don't know of it is important but in the moment I executed the code there was not CONVERSING conversation and all the queues were empty.
Somebody has seen this error before or I have to send to the forum the [dbo].[OnReceived] code as well?
thankx
Marina B.
View 3 Replies
View Related
Nov 2, 2007
Hi all,
Can we get the event properties by using a query?
Are there any extended stored procuder to get the above?
Scenario:
>Desktop>Right Click on My Computer
>Go to Manage and click
>Expand System Tools
>Expand Event Viewer
>Application
click on one event.We can get the log info which is the manual procudure.
But now i want to get the event properties through the Query analyzer...
Any help would be great?
Thanks,
View 4 Replies
View Related
Jan 17, 2003
18275 :
Unnamed tape (Family ID: 0xcfb8a96c, sequence 1) dismounted from tape drive ‘master tape backup’.
this also happens for the mounted part also, how do I name a tape drive? or stop these warnings in the event logs?
thanks for your help
View 1 Replies
View Related
Feb 1, 2002
I tried to save an event viewer file as a .txt format file and when I open the saved file, it's not readable.
Can someone have an idea of what format should I save the event viewer file so I will be able to view it's contents?
Thanks in advance!!
View 2 Replies
View Related
Jan 7, 2005
My boss has now decided that he doesnt want to see SQL errors in the event viewer, unless they are actual errors.
The two errors are:
A - When the DB log is truncated it goes into the event viewer as an error. This needs to either not go into the event viewer at all, or be classed as something other than an error.
B - "Sqllib error: Database x is not simple." This one I dont even know what causes it, but the same thing applies, either it shouldnt be logged, or it needs to be logged as something other than an error. Although what does cause this message?
Any help on these would be appresiated
Thanks :)
View 3 Replies
View Related
Apr 10, 2006
Hi guys
i am puzzled on how to decipher the below msg on my sql server
Had tried adjusting the settings but apparantly doesnt work
is this due to my license or what other reasons?
Error msg:
17052 :
This SQL Server has been optimized for 8 concurrent queries. This limit has been exceeded by 30 queries and performance may be adversely affected.
sql server : MS SQL Enterprise 8.0
View 1 Replies
View Related
Apr 14, 2004
Hi I am getting the following error:
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 17052
Date: 4/14/2004
Time: 09:32:05 AM
User: SYSTEM
Computer: BSEW2k01
Description:
Error: 50000, Severity: 5, State: 1
Error Calling StatusToStreet In DCS0 Code 7202
Please help.
Thanks
View 2 Replies
View Related
Mar 19, 2001
Hi for everyone!
I need any example to use raise error that write into event Viewer I use WITH LOG directive
but it's no success.
Sincerely.
FAin Boris
View 2 Replies
View Related
Mar 24, 1999
Hello Everyone:
I'm in the process of verifying that all functionality in a version 6.5 database is still there in SQL 7.0. After the upgrade, one issue seems different.
When I attach to a SQL 6.5 database, the full username used in the connection is displayed in the Windows NT Event Viewer. But when I attach to the same database in SQL 7, the username shows up in the Event Viewer as 'N/A'. I've verified that audit permissions are set the same on both boxes both under SQL and in User Manager. Any ideas??
View 1 Replies
View Related
Jul 14, 2004
l am trying to see how to export event veiwer log to database(mssql) and incremental updates.
sql MS server and with window 2000
if anyone knows how to do this in .net or third party software pls let me know.
View 1 Replies
View Related
Jul 23, 2005
I have a stored procedure that I use for call a aspx page from within SQL. The stored procedure itself runs finewith no errors but I keep getting errors in the event viewer everytimeit runs (with .vbs, .NET, .vb6 client) outside Enterprise manager or SQL Query Analyzer.....This is error:Error: 0, Severity: 19, State: 0SqlDumpExceptionHandler: Process 52 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.I think that this is the same problem seen inhttp://www.sqlmonster.com/Uwe/Forum...in-Event-ViewerI've test with XP sp2, W2003 server, SQL 2000 sp3a......on the same machine.ANY SUGGESTIONS??????Thanks--Message posted via http://www.sqlmonster.com
View 3 Replies
View Related
Oct 24, 2007
Is there a way to handle an event when the report viewer has completed loading the report? I have handled the report viewer load event but also want to handle an event for when it has completed loading.
I am wanting this because the "report is being generated" message is far off of the screen when I use a large report viewer.
So, on page load I simply make a textbox visible that says "report is being generated". When it completes generating the report, I want it to make that message invisible.
The disposed and unload events don't seem to handle this correctly.
View 7 Replies
View Related
Oct 3, 2001
Hi all,
I want send messages(e.g. error description,record count...)to NT event viewer,how can I implement with sql?
thanks
View 1 Replies
View Related
Dec 11, 2006
Hi everyone,
I was wondering how do for 'Log Events' info going to Event Viewer Windows visor. Is it possible or it's just only private info for you SSIS.
Thanks for your input,
View 2 Replies
View Related
Feb 25, 2004
I use VB 6.0 with ADO 2.6 to access an SQL-server.
I know that the table I wish to create generates this warning.
But from today ( without any changes to the SQL-server ) , this warning is reported as an error to the client instead of continuing.
So my error trap routine traps this as an error now.
I have a workaround that I would to avoid and that's reinstalling the SQL-server ( Only the MSSQL ).
Does anybody know a better solution.
PS : Changing the table structure is not possible in this case.
Thnx in advance,
Sven Peeters
Belgium
View 2 Replies
View Related
Jul 23, 2005
Hi,I have a few create table statements which create temporary tablesthat has row definitions which exceeds the 8060 size limit, this causesa warning message being generated (Message 1708).Is there a way I can disable/avoid the warning message from beingprinted ?Thanks,joe
View 2 Replies
View Related
Jun 27, 2001
We are seeing the following error message in our SQL logs and was hoping for some advice.
"Warning: the available page file space has dropped below 4 MB"
To fix the problem we thought we should increase our paging file size for our virtual memory on the server. The recommended allocation was 3083 MB and previously we were using less than the recommended amount so we allocated 7167 MB (the max we were allowed). Do you see any problems with this or have any recommendations?
View 4 Replies
View Related
Apr 9, 2008
I'm getting the following error message
[rsNonAggregateInMatrixCell] The Value expression for the textbox €˜IMAGE_TOTAL_1€™ references a field outside an aggregate function. Value expressions in matrix cells should be aggregates, to allow for subtotaling.
the cell it is refering to is in the data area of a matrix.
The value expression is =sum(Fields!IMAGE_TOTAL.Value,"MAIN")
this cell also has a navigation set to "job to a report"
When i take out the navigation the warning messages go away.
Is there an issue with using navigation link on a textbox with an aggregate in it?
ps - everything runs fine I just get a warning message.
View 3 Replies
View Related
May 10, 2007
"Warning: Null value is eliminated by an aggregate or other SET operation."
i keep having this message while having some joint statement.
is there a way to prevent this or even hide this message?
View 3 Replies
View Related
Jul 9, 2006
Hi there,
I have only this warning message during the System Configuration Check:
ASP.Net Version Registration Requirement (Warning)
Messages
ASP.Net Version Registration Requirement
64-bit ASP.Net is Registered. Required 32-bit ASP.Net to install Microsoft Reporting Services 2005(32-bit).
Does this mean that I can't install Reporting Services or should I pay no attention to it and continue to install?
I'm running on Windows 64-bit Pro. edition.
Thanks,
Eric
View 24 Replies
View Related
Jul 11, 2007
How to solve the problem of Warning message 'Fail Components' and 'redirect row' when doing text mining?
thanks
View 1 Replies
View Related
Sep 12, 2007
We have a database at a network location that we allow many of our employee's to access. They all have the same settings however a few of them return a Failure Audit in System event viewer log occasionally. It is not every time they access the database. Below is a copy of the details. Any ideas what could be causing this?
8/5/97 8:11:45 PM Security Failure Audit
Object Access 560
<USERNAME>
<MACHINE NAME>
Object Open:
Object Server: Security
Object Type: File
Object Name: <FILE PATHNAME>
New Handle ID: -
Operation ID: {0,1163459588}
Process ID: 8
Primary User Name: <USERNAME>
Primary Domain: <DOMAIN NAME>
Primary Logon ID: (0x0,0x2EA46)
Client User Name: <USERNAME>
Client Domain: <DOMAIN NAME>
Client Logon ID: (0x0,0x4544E865)
Accesses READ_CONTROL
ReadData (or ListDirectory)
WriteData (or AddFile)
AppendData (or AddSubdirectory or CreatePipeInstance)
ReadEA
WriteEA
ReadAttributes
WriteAttributes
Privileges -
View 1 Replies
View Related
Mar 28, 2001
Event Id: 8, Source: SQLCTR60
Type: error, Catagory: None,
DB-Library error - unexpected EOF from SQL server. Conection broken.
View 2 Replies
View Related
Aug 10, 2006
Hi,
I want insert data into table from csv file, so I put a data flow task on control flow tab,
a flat source and a ole db dest on data flow tab. They work well.
Then to get the error log I put a script task on event handler tab, in this script task I want to
output the error description to a txt file while the data flow task fails for any reasons
such as constraint failure etc.
In this script task I think I can get the error description by using property Err.Description,
but Err.Description is empty while data flow task fails.
How can I get the error description in the script task on event handler tab.
thanks!
View 3 Replies
View Related
Aug 23, 2013
On the SQL Server the Event Viewer shows the same messages and errors every evening between 22:05:00 and 22:08:00. The following information messages are shown for every database:
"I/O is frozen on database <database name>. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup."
"I/O was resumed on database <database name>. No user action is required."
"Database backed up. Database: <database name>, creation date(time): 2003/04/08(09:13:36), pages dumped: 306, first LSN: 44:148:37, last LSN: 44:165:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'{A79410F7-4AC5-47CE-9E9B-F91660F1072B}4'}). This is an informational message only. No user action is required."
After the 3 messages the following error message is shown for every database:
"BACKUP failed to complete the command BACKUP LOG <database name>. Check the backup application log for detailed messages."
I have added a Maintenance Plan but these jobs run after 02:00:00 at night.
Where can I find the command or setup which will backup all databases and log files at 22:00:00 in the evening?
View 9 Replies
View Related
Jun 18, 2007
Greetings,
I am developing a package on my local workstation. I have defined two logging service providers. One is for SQL Server and the other is for the Windows Event Log. I am using the Dts.Log method in a script task to write log entries.
Logging is working properly with the SQL Server provider and rows are being inserted into the sysdtslog90 table. However, the only events that are being logged in the Windows Event Log are the package start and end events which I believe SSIS is doing automatically anyway.
Is there something I need to do to enable WIndows Event Log logging other than defining a log provider and making sure it is checked active? Won't SSIS write to two different logs with one Dts.Log call? Any ideas on what might be going wrong with my approach?
Thanks,
BCB
View 3 Replies
View Related
Apr 3, 2007
Ok guys, I am trying to install Sql server 2005 on Vista but I am still stuck with this warning message in the System Configuration Check during Sql server 2K5 installation :
SQL Server Edition Operating System Compatibility (Warning)
Messages
* SQL Server Edition Operating System Compatibility
* Some components of this edition of SQL Server are not supported on this operating system. For details, see 'Hardware and Software Requirements for Installing SQL Server 2005' in Microsoft SQL Server Books Online.
Now, I know I need to install SP2 but how the hell I am going to install SP2 if Sql server 2005 doesn't install any of the components including Sql server Database services, Analysus services, Reporting integration services( only the workstation component is available for installation)?
Any work around for this issue?
P.S.: I didn't install VS.NET 2005 yet, can this solve the problem?
Thanks.
View 8 Replies
View Related
Jun 2, 2015
Recently we migrated our environment to 2012.
We are planning to implement Xevents in all the servers in place of Trace files and everything is working fine.
Is it possible to configure Extended event to trigger a mail whenever any event (example dead lock) occurs.
I have gone through so many websites but i never find.
View 13 Replies
View Related
Oct 25, 2011
My SQL Server 2005 SP4 on Windows 2008 R2 is flooded with the below errors:-
Date  10/25/2011 10:55:46 AM
Log  SQL Server (Current - 10/25/2011 10:55:00 AM)
Source  spid
Message
Event Tracing for Windows failed to send an event. Send failures with the same error code may not be reported in the future. Error ID: 0, Event class ID: 54, Cause: (null).
Â
Is there a way I can trace it how it is coming? When I check input buffer for these ids, it looks like it is tracing everything. All the general application DMLs are coming in these spids.
View 2 Replies
View Related