Warning: Null Value Eliminated From Aggregate.
Dec 28, 2001
Hello,
After running a script in QA, I got several result sets and one of them is "Warning: Null value eliminated from aggregate.". How can I get rid of this output so it's not shown at all. I use the output as a recordset on the ASP page.
Thank you very much.
View 1 Replies
ADVERTISEMENT
May 2, 2005
Hey all.
I am getting this warning when I execute my query:
* Warning: Null value is eliminated by an aggregate or other SET operation. *
It is still populating the results fine, but I dont know how to get rid of it. I know one of my solutions is:
SET ANSI_WARNINGS OFF
-- sql code
SET ANSI_WARNINGS ON
Apparently it has to do with the MAX function in the following line:
SELECT @BusinessDay = (SELECT MAX(PeriodDate) FROM TableName)
I checked in the table and PeriodDate column has about 4000 of 10,000 rows blank. so Im assuming that is what is causing the error. what should I do? something like:
SELECT @BusinessDay = ISNULL((SELECT MAX(PeriodDate) , @TodaysDate) From TableName
comments appreciated, thanks!
View 3 Replies
View Related
Apr 28, 2015
In a t-sql 2012 query that will be updated in a stored procedure I am getting the following warning message:
Warning: Null value is eliminated by an aggregate or other SET operation. I would like to get rid of this warning missing without just turning off the warning messages.
I would like to change the sql so that it does not occur. The following is my new sql that generates the warning:
case when (coalesce(a.status,ae.status) = 'A') and (IsNull(ae.excuse, 'U') = 'U') and (IsNull(ae.code, 'DRC') = 'DRC') then
sum(DATEDIFF(minute,pm.startTime,pm.endTime)-coalesce(pm.lunchTime,0)-coalesce(a.presentMinutes,0)) else 0 end as DRCMinutes,
The sql is part of a select statement.
View 1 Replies
View Related
Nov 26, 2013
I execute the code below
declare @LastDate datetime
SELECT @LastDate = max([LastUpdate])
FROM [exhibitor].[dbo].[blgBelongs]
WHERE (([Table1]=@module1 OR [Table2]=@module2 )or ([Table2]=@module1 OR [Table1]=@module2 )
AND Exists (SELECT [Table1],[Table1ID] FROM [exhibitor].[dbo].[blgBelongs] WHERE table2=30 and table2ID=@dmn_ID))
Before I see @LastDate , I see this warning
Warning: Null value is eliminated by an aggregate or other SET operation.
View 7 Replies
View Related
Mar 19, 2015
I'm getting this error:
Divide by zero error encountered.
Warning: Null value is eliminated by an aggregate or other SET operation.
this is where i'm getting the error:
CASE WHEN Claims.ClaimTotal > 0 then (ISNULL(Claims.ClaimTotal,0) / ISNULL(TotalPrem.TotalPrem,dbo.TrnPolicy.TotalDue)) else 0 END AS LossRatio
View 3 Replies
View Related
Nov 16, 2005
All in the subject.
View 11 Replies
View Related
Jun 2, 2006
The following code works perfectly when run by itself:
DECLARE @DateTransaction smalldatetime
DECLARE @TradeDate smalldatetime
SET @DateTransaction = (SELECT Max(DateTransaction) FROM tblImport)
SET @TradeDate = (SELECT Max(DateTrade) FROM tblSystem)
PRINT 'The Transaction Date is ' + CAST(@DateTransaction as varchar) + '. The Trade Date is ' + CAST(@TradeDate as varchar)
However, it is part of a long stored procedure, and when it runs there, I get the following instead of the line confirming the two dates:
Warning: Null value is eliminated by an aggregate or other SET operation.
What could be interfering with this section of the stored procedure?
View 4 Replies
View Related
Oct 23, 2007
I'd like the results of my query to stream right to a file rather than be processed row by row in an ADO reader loop. Is this possible?
View 5 Replies
View Related
Oct 19, 2007
Can any1 tell me why i am getting an error
SELECT DISTINCT
--p.voucher,
--p.amount,
p.siteID,
b.siteID,
SUM((round(b.total,2,2)) - SUM(round(p.amount,2,2))) AS OutStandingBalance,
SUM((round(b.total,2,2)) - SUM(round(p.amount,2,2))) AS CashCheque,
SUM((round(b.total,2,2)) - SUM(round(p.amount,2,2))) AS Vouchers
FROM
BillingTotal b,
Payment p
--WHERE
-- s.sitename=@cmb1
--AND p.siteid = s.siteid
-- p.voucher = 0
-- p.voucher = 1
GROUP BY p.siteID,b.siteID
Msg 130, Level 15, State 1, Line 1
Cannot perform an aggregate function on an expression containing an aggregate or a subquery.
View 8 Replies
View Related
Sep 22, 2015
I have 2 Dimensions in SSAS (see below end), I want to create a calculated member, named
This_Year_Billable_Objective_Count, with its formula = BillableLastYear*(100+ BillableObjective)/100.
The first factor, BillableLastYear is a number, aggregated (sum) from child units.
The second factor, BillableObjective is a percent number (for example 28 means 28%), it's not aggregate. It's an dependent value for each unit.
How can I calculate This_Year_Billable_Objective_Count for each unit?
\ able 1
SELECT [UnitKey]
,[UnitID]
,[UnitName]
,[Unit2Name]
,[Unit3Name]
,[Unit4Name]
[Code] .....
View 6 Replies
View Related
Sep 20, 2006
Hey. I need to substitute a value from a table if the input var is null. This is fine if the value coming from table is not null. But, it the table value is also null, it doesn't work. The problem I'm getting is in the isnull line which is in Dark green color because @inFileVersion is set to null explicitly and when the isnull function evaluates, value returned from DR.FileVersion is also null which is correct. I want the null=null to return true which is why i set ansi_nulls off. But it doesn't return anything. And the select statement should return something but in my case it returns null. If I comment the isnull statements in the where clause, everything works fine. Please tell me what am I doing wrong. Is it possible to do this without setting the ansi_nulls to off??? Thank you
set ansi_nulls off
go
declare
@inFileName VARCHAR (100),
@inFileSize INT,
@Id int,
@inlanguageid INT,
@inFileVersion VARCHAR (100),
@ExeState int
set @inFileName = 'A0006337.EXE'
set @inFileSize = 28796
set @Id= 1
set @inlanguageid =null
set @inFileVersion =NULL
set @ExeState =0
select Dr.StateID from table1 dR
where
DR.[FileName] = @inFileName
AND DR.FileSize =@inFileSize
AND DR.FileVersion = isnull(@inFileVersion,DR.FileVersion)
AND DR.languageid = isnull(@inlanguageid,null)
AND DR.[ID]= @ID
)
go
set ansi_nulls on
View 3 Replies
View Related
Jul 15, 2005
I have a column that has an expression with a runningvalue in it, a "Carrying Cost" for each month. I need to create another column that aggregates the monthly Cost. I can't to do a Runningvalue on the Runingvalue. I can't even do a Sum on the Runningvalue.
View 9 Replies
View Related
Jul 17, 2001
Whats the cause for this warning, after I query a sqlserver 7 table,
'warning: Null value eliminated from aggregate' ?
Thanks,
Scott
View 1 Replies
View Related
Nov 12, 2002
I keep getting this warning, any ideas on how to fix this? Thank you.
View 1 Replies
View Related
Aug 17, 2004
Hello,
I am getting the following warning message in the event viewer. I have only one schedule in sql. there is no other schedules in task scheduler or database management.
Event Type:Warning
Event Source:SQLSERVERAGENT
Event Category:Job Engine
Event ID:208
Description:
SQL Server Scheduled Job 'Transaction Log Backup Job for DB Maintenance Plan 'DB Maintenance Plan1'' (0xD25A4CDDD1C59E48B4D28F61F0A411B8) - Status: Failed - Invoked on: 2004-08-16 02:30:00 - Message: The job failed. The Job was invoked by Schedule 2 (Schedule 1). The last step to run was step 1 (Step 1).
Kindly give the suggestions at earliest.
View 1 Replies
View Related
Jan 26, 2004
Hey guys....I have a quick question. I am having a problem with a certain app which connects to my SQL 2000 SP3a Database. It only occurs when I have a ^ in the password, both using SQL and NT authentication.
I have checked on MSDN and they do not list that character as one to avoid. I did find in the books online documentation that the ^ performs a bitwise exclusive OR operation....has anyone tested using ^ as part of a password to authenticate to a SQL db?
View 1 Replies
View Related
Jan 6, 2006
I typed the following query
ALTER TABLE [konnik].[PORTAL_CONFIG]
ADD CONSTRAINT [DF_PORTAL_CONFIG_AUTOPM_ON]
DEFAULT (1) FOR [AUTOPM_ON]
and i received the following warning
Warning: The table 'PORTAL_CONFIG' has been created but its maximum row size (12068) exceeds the maximum number of bytes per row (8060). INSERT or UPDATE of a row in this table will fail if the resulting row length exceeds 8060 bytes.
Bear in mind that this table come from Access through the Dts. Could anyone translate this for me? How can i overcome this???
View 10 Replies
View Related
May 7, 2007
hi all..
i have this error and fail to resolve it :-
Warning: Null value is eliminated by an aggregate or other SET operation.
what does that means? my code :-
SELECT
@BookQtyIN = ISNULL(SUM(x.pickqty), 0),
@PickQtyIN = CASE WHEN ISNULL(SUM(x.pickqty), 0) >0 THEN
ISNULL(SUM(d.PickQty), 0) - ISNULL(SUM(x.pickqty), 0)
ELSE ISNULL(SUM(d.PickQty), 0)END,
FROMtblItemDetail d
LEFT JOIN (SELECT p.PickQty AS PickQty,
j.PickComplete AS PickComplete,
p.ItemStorageID AS ItemStorageID
FROM tblItempicked p
LEFT JOIn tblJobDocuments j
ON j.Docrefid=p.Docrefid AND j.JobID=p.JobID
WHERE j.PickComplete='N'
)AS x ON x.ItemStorageID=d.ItemStorageID
WHERE d.ItemID = @ItemID
AND d.Ownership = @ClientID
AND d.CustomLotNo = @CustomLotNo
View 2 Replies
View Related
May 25, 2006
If you have a package that uses an environment variable for an indirect configuration and the environment variable is not present when the package runs you get the following warning:
The configuration environment variable was not found. The environment variable was: "Seer.ConnectionManager.CUECommonReference". This occurs when a package specifies an environment variable for a configuration setting but it cannot be found. Check the configurations collection in the package and verify that the specified environment variable is available and valid.
IMO, if the package is expecting to find something and cannot find it then it should cause an error, not a warning. I'm happy for people to disagree tho :)
Any comments???
-Jamie
View 17 Replies
View Related
Jan 17, 2008
Install on 2003 Server R2 x64 I get this warning and need to now how to fix this:
- ASP.Net Version Registration Requirement (Warning)
Messages
ASP.Net Version Registration Requirement
64-bit ASP.Net is Registered. Required 32-bit ASP.Net to install Microsoft Reporting Services 2005(32-bit).
Can the 32-bit version co-exist with the 64-bit version APS.Net?
View 3 Replies
View Related
May 24, 2007
Hello,
I'm having a problem with one of my packages due to a truncation warning that I can't get rid of. It's not the end of the world, because the package still works. It's just extremely frustrating.
The problem arises in a derived column item in a data flow task. There is a postcode field in the data flow which has space for 20 characters. I create a derived column from this which simply removes any spaces:
Derived Column Name: Postcode
Derived Column: Replace 'Postcode'
Expression: REPLACE(" ",Postcode,"")
Data Type: string [DT_STR]
Length: 20
Code Page: 1252 (ANSI - Latin I)
However when I use this expression, or anything else which uses the replace function, I end up with the warning message:
Warning 1 Validation warning. Create Staging Tables: Derived Column [20555]: The result string for expression "REPLACE(" ",Postcode,"")" may be truncated if it exceeds the maximum length of 4000 characters. The expression could have a result value that exceeds the maximum size of a DT_WSTR.
I have tried everything I can think of to get rid of the warning. Is there some way I can use the replace function, but not have the system convinced that I'm about to go over the maximum size limit?
Many thanks
View 5 Replies
View Related
Oct 20, 2015
In my report i have CNAME parameter , which allows null value. I checked Allow null value check box in report parameter properties.
when i preview the report , it displays checked NULL check box beside CNAME parameter . I want to give some meaningful name(i.e.ALLCustomers) to this checkbox instead of NULL.
Is it possible through SSRS designer?
View 5 Replies
View Related
Feb 14, 1999
Can some one please help.
Lately I am getting an error:
LAZY WRITER WARNING: LRU List is Empty
Than the system locks!
can anyone help. This is driving us crazy.
There is no reference in the KB. We are trying to insert records into a table by a SP.
Thanks,
John
View 2 Replies
View Related
May 20, 1999
I'm running SQL Server 6.5, with the latest Service pack on NT 4.0 with SP4. A couple of days ago I started getting a warning message in my event log right after a scheduled task ran. The scheduled task calls three stored procedures (data dumps for master, msdb, and a production database) it also runs a consistency check on each before dumping them. I can interactively run each stored procedure and get NO error messages. Prior to getting the warning message (which occurs after the scheduled task runs) I get normal informational entries that the dumps occurred without a problem and the files are written to the proper area. The error is in the Task Engine category and are Warning type messages. Here is the text:
SQL Server Scheduled Task: 27, 'Proddata Dump' -- Status: Failed
-- Task Invoked on: 5/20/99 5:00:00 AM -- Message: Database 'ASSMTCTRPROD' (116647 pages) dumped to file <1> on device 'D:DATDUMPASSMTCTRPROD_990520_DATA.DMP'. (Message 4035)
Any help that anyone could give would be greatly appreciated. Thanks
View 1 Replies
View Related
Jul 23, 2002
Hi
I'm getting a strange sql server agent warning in my server's event log (not in the sql server log). Its occurring after each agent job runs and says:
"Unable to determine if the owner (sa) of job Trans Backup has server access (reason: Unable to connect to server - check SQL Server and SQL Agent errorlogs)."
I have checked the errorlogs - nothing.
My job completes OK, but I get this warning.
I'm running SQL Server 2000 SP2.
I'm running in a cluster.
The problem has only occurred since a reboot yesterday.
Any Ideas?
Thanks in advance.
Andy
View 2 Replies
View Related
Feb 8, 2008
Hi All,
I've recently restored one of my development databases from it's production backup. The restore completed successfully, users were able to connect to the database without any problems. However, when I checked the error log I found the following message:
Bypassing recovery for database 'Test' because it is marked IN LOAD.
I could not find anything on the web or in BOL. Any ideas?
Thanks.
View 3 Replies
View Related
Feb 10, 2004
Hi all,
Sql server 7.
Under event viewer->application log i am getting the below error continously. Pls help
Regards,Event Type: Warning
Event Source: SQLServerAgent$abc
Event Category: Printers
Event ID: 208
Date: 2/9/2004
Time: 9:23:03 PM
User: N/A
Computer: abc1
Description:
The description for Event ID ( 208 ) in Source ( SQLServerAgent$abc ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: SQL Check, 0xAF04DFE7917DEA489F33D8A38E8A0793, Failed, 2/9/2004 9:23:00 PM, The job failed. The Job was invoked by Schedule 31 (6.x schedule). The last step to run was step 1 (Step 1)..
Waiting for ur reply
TIA
aadil
View 3 Replies
View Related
Feb 25, 2004
I use VB 6.0 with ADO 2.6 to access an SQL-server.
I know that the table I wish to create generates this warning.
But from today ( without any changes to the SQL-server ) , this warning is reported as an error to the client instead of continuing.
So my error trap routine traps this as an error now.
I have a workaround that I would to avoid and that's reinstalling the SQL-server ( Only the MSSQL ).
Does anybody know a better solution.
PS : Changing the table structure is not possible in this case.
Thnx in advance,
Sven Peeters
Belgium
View 2 Replies
View Related
Sep 18, 2007
Hello there
I installed sql server 2005 developer edition
and the only error message i got was.
- IIS Feature Requirement (Warning)
Messages
IIS Feature Requirement
Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online.
how do i get hold of Internet Information Services
I installed it on vista premium.
Please help
Regards
ROB
View 3 Replies
View Related
Nov 30, 2007
While intalling SQL 2005 on an x64 machine, I got an error message that warned that some functions of SQL would not install unless IIS was installed (and enabled) on the machine. It did not say what would not install, but I gather it is Reporting Services. I don't recall getting these warnings in previous (32 bit) installations of SQL 2005.
On the other hand, when I go into the BI Intelligence Studio on
a (32 bit) server that does not have IIS, I seem to be able to create
a report anyway (Not really my area of expertise ). Does that mean that Report Services is working without IIS?
View 1 Replies
View Related
Jul 23, 2005
Hi,I have a few create table statements which create temporary tablesthat has row definitions which exceeds the 8060 size limit, this causesa warning message being generated (Message 1708).Is there a way I can disable/avoid the warning message from beingprinted ?Thanks,joe
View 2 Replies
View Related
Jul 20, 2005
Awhile back there was some discussion about ways of sending multiplerows of data to SQL Server. The ADO .UpdateBatch method was one ofthe possibilities mentioned, and Erland said he thought that probablyonce the data get to SQL Server they are probably actually insertedone row at a time. I just want to say that based on an experience Ihad a couple of days ago I am now sure that is the case. I was using..UpdateBatch for something quick and dirty I had to do just once andwas too lazy to use XML for. An error was generated during the..UpdateBatch process because of invalid data in one row. However, alarge number of the rows in the batch WERE written to the database.Until now I haven't used .UpdateBatch in a production environment onlybecause this implies granting INSERT or UPDATE privileges to the user.But based on this experience I would NEVER use .UpdateBatch in aproduction environment, even for a user like a batch job where thepermissions would not be an issue.FWIW.
View 11 Replies
View Related
Apr 8, 2008
Hello All,
I have an SSIS package which uses a third party RMS driver. It is not licensed and so it throws a warning messagebox when the package is run and every time the connection is used. Is there a way to suppress these messages so that the package can be scheduled and run without user interaction?
Thanks
Arun
View 10 Replies
View Related