Warning Message 1708

Feb 25, 2004

I use VB 6.0 with ADO 2.6 to access an SQL-server.
I know that the table I wish to create generates this warning.

But from today ( without any changes to the SQL-server ) , this warning is reported as an error to the client instead of continuing.
So my error trap routine traps this as an error now.

I have a workaround that I would to avoid and that's reinstalling the SQL-server ( Only the MSSQL ).

Does anybody know a better solution.

PS : Changing the table structure is not possible in this case.

Thnx in advance,

Sven Peeters
Belgium

View 2 Replies


ADVERTISEMENT

How To Disable A Warning Message ?

Jul 23, 2005

Hi,I have a few create table statements which create temporary tablesthat has row definitions which exceeds the 8060 size limit, this causesa warning message being generated (Message 1708).Is there a way I can disable/avoid the warning message from beingprinted ?Thanks,joe

View 2 Replies View Related

Warning Message In The Event Viewer

Jun 7, 2001

Hi

Can anyone tell me what this warning message in the Quotes below...
I get this on one of our servers every 15 minutes in the event Viewer..

Here is the message in the event Viewer..
"Replication of license information failed because the License Logging Service on server PSNJRPDC could not be contacted."

Thanks All,
Venu

View 1 Replies View Related

Page File Warning Message

Jun 27, 2001

We are seeing the following error message in our SQL logs and was hoping for some advice.

"Warning: the available page file space has dropped below 4 MB"

To fix the problem we thought we should increase our paging file size for our virtual memory on the server. The recommended allocation was 3083 MB and previously we were using less than the recommended amount so we allocated 7167 MB (the max we were allowed). Do you see any problems with this or have any recommendations?

View 4 Replies View Related

Jump To Report Warning Message

Apr 9, 2008

I'm getting the following error message


[rsNonAggregateInMatrixCell] The Value expression for the textbox €˜IMAGE_TOTAL_1€™ references a field outside an aggregate function. Value expressions in matrix cells should be aggregates, to allow for subtotaling.


the cell it is refering to is in the data area of a matrix.
The value expression is =sum(Fields!IMAGE_TOTAL.Value,"MAIN")


this cell also has a navigation set to "job to a report"

When i take out the navigation the warning messages go away.

Is there an issue with using navigation link on a textbox with an aggregate in it?

ps - everything runs fine I just get a warning message.

View 3 Replies View Related

[SQL 2005] How Do I Prevent Or Hide This Warning Message?

May 10, 2007

"Warning: Null value is eliminated by an aggregate or other SET operation."

i keep having this message while having some joint statement.

is there a way to prevent this or even hide this message?

View 3 Replies View Related

Setup Question: ASP.Net Version Registration Requirement Warning Message

Jul 9, 2006

 

Hi there,

I have only this warning message during the System Configuration Check:

ASP.Net Version Registration Requirement (Warning)



Messages

ASP.Net Version Registration Requirement


64-bit ASP.Net is Registered. Required 32-bit ASP.Net to install Microsoft Reporting Services 2005(32-bit).


Does this mean that I can't install Reporting Services or should I pay no attention to it and continue to install?

I'm running on Windows 64-bit Pro. edition.

Thanks,

Eric

View 24 Replies View Related

SQL Server Express 2005 Warning Message In Event Log From SQL Browser Service

May 1, 2007

Hello,

I have been trying to drill down to the cause for this event log message:
"The configuration of the AdminConnectionTCP protocol in the SQL instance
SQLEXPRESS is not valid."
It is reported from the SQLBrowser service as a warning when the service
starts. I have tried starting SQLBrowser.exe with -c flag, but the output reveals no
errors. I have seen this error on three computers. Two are running SQL 2000, 2005
and Express. One was only running Express, but still this message.
I then looked into the log for the SQL Express server itself. It shows this
message on startup:
"Dedicated administrator connection support was not started because it is
not available on this edition of SQL Server. This is an informational message
only. No user action is required."
Now, it appears to me that these two messages may relate to the same
"error" (or rather behaviour by design). So, can anyone confirm that the
warning in the event log from the SQL Browser service occurs becuase of that
the SQL Express edition doesn't allow any "AdminConnection", but the SQL
Browser service isn't aware of that SQL Express edition shouldn't support that, and
reports it as a warning (implying that we can't do much about this warning)?

Thanks for any input on this issue!

View 5 Replies View Related

How To Solve The Problem Of Warning Message 'Fail Components' And 'redirect Row' When Doing Text Mining?

Jul 11, 2007

How to solve the problem of Warning message 'Fail Components' and 'redirect row' when doing text mining?



thanks

View 1 Replies View Related

Sql Server 2005 Operating System Compatibility Warning Message In System Configuration Check

Apr 3, 2007

Ok guys, I am trying to install Sql server 2005 on Vista but I am still stuck with this warning message in the System Configuration Check during Sql server 2K5 installation :



SQL Server Edition Operating System Compatibility (Warning)
Messages
* SQL Server Edition Operating System Compatibility

* Some components of this edition of SQL Server are not supported on this operating system. For details, see 'Hardware and Software Requirements for Installing SQL Server 2005' in Microsoft SQL Server Books Online.



Now, I know I need to install SP2 but how the hell I am going to install SP2 if Sql server 2005 doesn't install any of the components including Sql server Database services, Analysus services, Reporting integration services( only the workstation component is available for installation)?



Any work around for this issue?



P.S.: I didn't install VS.NET 2005 yet, can this solve the problem?



Thanks.

View 8 Replies View Related

Note: 1: 1708 During SQL 2005 Setup

Sep 20, 2007



Hi,

I am trying to install SQL server 2005 developer edition on Win XP SP2.

I am getting error during Database Services install throwing a log (part of it)




Property(S): FTERegRudeInstName.68C6D15C_77E0_11D5_8528_00C04F68155C = MSSQL.1
Property(S): FTEUPGRADE.68C6D15C_77E0_11D5_8528_00C04F68155C = 0
Property(S): FTEUpgrade30.68C6D15C_77E0_11D5_8528_00C04F68155C = 0
Property(S): FTEUpgradeMSSearchApp.68C6D15C_77E0_11D5_8528_00C04F68155C = SQLServer
Property(S): FTEUpgradeMSSearchStandalone.68C6D15C_77E0_11D5_8528_00C04F68155C = 0
Property(S): CostingComplete = 1
Property(S): FTEInstID.68C6D15C_77E0_11D5_8528_00C04F68155C = 1
Property(S): FTEAppID.68C6D15C_77E0_11D5_8528_00C04F68155C = {68C6D318-77E0-11D5-8528-00C04F68155C}
Property(S): FTEAdminCLSID.68C6D15C_77E0_11D5_8528_00C04F68155C = {68C6D37C-77E0-11D5-8528-00C04F68155C}
Property(S): FTEIFTEAdmin.68C6D15C_77E0_11D5_8528_00C04F68155C = {64f6bd6f-cc0d-11d6-9a15-505054503030}
Property(S): FTEMSFTEPXY.68C6D15C_77E0_11D5_8528_00C04F68155C = {64f6bdd4-cc0d-11d6-9a15-505054503030}
Property(S): FTEServiceName.68C6D15C_77E0_11D5_8528_00C04F68155C = msftesql
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 0
Property(S): PrimaryVolumeSpaceRequired = 0
Property(S): PrimaryVolumeSpaceRemaining = 0
Property(S): RSVirtualDirectoryManager = Reports
Property(S): RSVirtualDirectoryServer = ReportServer
Property(S): SqlActionManaged = 3
Property(S): SqlStateManaged = 2
Property(S): SOURCEDIR = D:Setup
Property(S): SourcedirProduct = {2373A92B-1C1C-4E71-B494-5CA97F96AA19}
Property(S): InstallNgenTicks = 20000
Property(S): SQLBROWSERSCMACCOUNT = CORPNBDQT5O
Property(S): AGTSCMACCOUNT = CORPNBDQT5O
Property(S): SQLSCMACCOUNT = CORPNBDQT5O
Property(S): DebugClsid.CC1A8C58_27D1_4D38_BF1B_C0A5CBB90616 = {7E6E77F5-0576-4DAF-A405-B9184C5DD85A}
Property(S): ProductToBeRegistered = 1
MSI (s) (AC:94) [11:53:33:621]: Note: 1: 1708
MSI (s) (AC:94) [11:53:33:621]: Product: Microsoft SQL Server 2005 -- Installation failed.


Could somebody help, please?

Amol

904-987-7972

View 1 Replies View Related

Installing SQL Server 2005 Standard, Note: 1: 1708, Installation Failed.

Feb 22, 2007

Hi,

I first attempted to install SQL Server 2005 with the management tools, SQL server services installed ok but the management tools did not install. I tried to re-install the management tools but the setup program thought that they were already installed. I then un-installed everything in Add/Remove programs, & rebooted. I then tried to install again but this time it thought that the SQL server services were already installed. I removed the services from the registry and rebooted again. Now when I try to install SQL Server 2005 it simply fails

The last message in the log is "Note: 1: 1708
MSI (s) (A0:6C) [15:34:23:656]: Product: Microsoft SQL Server 2005 -- Installation failed"

Any help would be appreciated

MSI (s) (A0:6C) [15:34:22:593]: Note: 1: 1402 2: HKEY_LOCAL_MACHINESoftwareMicrosoftMicrosoft SQL ServerMSSQL.1MSSQLServer 3: 2
MSI (s) (A0:6C) [15:34:22:593]: Note: 1: 1325 2: v2.0.50727
MSI (s) (A0:6C) [15:34:22:593]: PROPERTY CHANGE: Adding ASPNET_EVENTLOGDLL.6BAD20EB_8CBD_4950_9F16_9F83B608665D property. Its value is 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727EventLogMessages.dll'.
MSI (s) (A0:6C) [15:34:22:593]: Note: 1: 1402 2: HKEY_LOCAL_MACHINESoftwareMicrosoftMicrosoft SQL ServerMSSQL.1Replication 3: 2
MSI (s) (A0:6C) [15:34:22:593]: Note: 1: 1402 2: HKEY_LOCAL_MACHINESoftwareMicrosoftMicrosoft SQL ServerMSSQL.1Replication 3: 2
MSI (s) (A0:6C) [15:34:22:609]: Doing action: DetectSKUOS.D20239D7_E87C_40C9_9837_E70B8D4882C2
Action ended 15:34:22: AppSearch. Return value 1.
MSI (s) (A0:74) [15:34:22:609]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2B6.tmp, Entrypoint: DetectSKUOS
Action start 15:34:22: DetectSKUOS.D20239D7_E87C_40C9_9837_E70B8D4882C2.
<Func Name='LaunchFunction'>
Function=DetectSKUOS
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Doing Action: DetectSKUOS
PerfTime Start: DetectSKUOS : Thu Feb 22 15:34:22 2007
<Func Name='DetectSKUOS'>
VersionNT/64 detected
MsiNTProductType = 3
OS type: 0xf0000000, supported: 0xfff0ff00
<EndFunc Name='DetectSKUOS' Return='0' GetLastError='0'>
PerfTime Stop: DetectSKUOS : Thu Feb 22 15:34:22 2007
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (A0:6C) [15:34:22:687]: Skipping action: DetectWYukonOS.D20239D7_E87C_40C9_9837_E70B8D4882C2 (condition is false)
MSI (s) (A0:6C) [15:34:22:687]: Skipping action: SetErrorReporting (condition is false)
MSI (s) (A0:6C) [15:34:22:687]: Skipping action: SetSqmReporting (condition is false)
MSI (s) (A0:6C) [15:34:22:687]: Doing action: SetEnableRanu
Action ended 15:34:22: DetectSKUOS.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1.
MSI (s) (A0:6C) [15:34:22:687]: PROPERTY CHANGE: Modifying SqlEnableRanu property. Its current value is '0'. Its new value: '1'.
Action start 15:34:22: SetEnableRanu.
MSI (s) (A0:6C) [15:34:22:687]: Doing action: CCPSearch
Action ended 15:34:22: SetEnableRanu. Return value 1.
MSI (s) (A0:6C) [15:34:22:687]: Note: 1: 2205 2: 3: CCPSearch
MSI (s) (A0:6C) [15:34:22:687]: Note: 1: 2228 2: 3: CCPSearch 4: SELECT `Signature_` FROM `CCPSearch`
Action start 15:34:22: CCPSearch.
MSI (s) (A0:6C) [15:34:22:687]: Doing action: RMCCPSearch
Action ended 15:34:22: CCPSearch. Return value 0.
MSI (s) (A0:6C) [15:34:22:687]: Note: 1: 2205 2: 3: CCPSearch
MSI (s) (A0:6C) [15:34:22:687]: Note: 1: 2228 2: 3: CCPSearch 4: SELECT `Signature_` FROM `CCPSearch`
Action start 15:34:22: RMCCPSearch.
MSI (s) (A0:6C) [15:34:22:687]: Doing action: RestoreProductID
Action ended 15:34:22: RMCCPSearch. Return value 0.
MSI (s) (A0:20) [15:34:22:703]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2B7.tmp, Entrypoint: RestoreProductID
Action start 15:34:22: RestoreProductID.
<Func Name='LaunchFunction'>
Function=RestoreProductID
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Doing Action: RestoreProductID
PerfTime Start: RestoreProductID : Thu Feb 22 15:34:22 2007
<Func Name='RestoreProductID'>
<EndFunc Name='RestoreProductID' Return='0' GetLastError='0'>
PerfTime Stop: RestoreProductID : Thu Feb 22 15:34:22 2007
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (A0:6C) [15:34:22:765]: Doing action: SetShowPID
Action ended 15:34:22: RestoreProductID. Return value 1.
MSI (s) (A0:6C) [15:34:22:781]: PROPERTY CHANGE: Adding ShowPID property. Its value is '1'.
Action start 15:34:22: SetShowPID.
MSI (s) (A0:6C) [15:34:22:781]: Doing action: ValidatePID
Action ended 15:34:22: SetShowPID. Return value 1.
MSI (s) (A0:50) [15:34:22:781]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2B8.tmp, Entrypoint: ValidateProductID
MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding CCPTrigger property. Its value is '2'.
MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding PKU property. Its value is '0'.
MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding PIDSEQ property. Its value is '271000003'.
MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding PID property. Its value is '**********'.
MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding ProductID property. Its value is '**********'.
MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding DPID property. Its value is '**********'.
MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding DigitalProductID property. Its value is '**********'.
MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding PIDRET property. Its value is '0'.
Action start 15:34:22: ValidatePID.
MSI (s) (A0:6C) [15:34:22:843]: Doing action: DetectProductID
Action ended 15:34:22: ValidatePID. Return value 1.
MSI (s) (A0:20) [15:34:22:859]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2B9.tmp, Entrypoint: DetectProductID
Action start 15:34:22: DetectProductID.
<Func Name='LaunchFunction'>
Function=DetectProductID
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Doing Action: DetectProductID
PerfTime Start: DetectProductID : Thu Feb 22 15:34:22 2007
<Func Name='DetectProductID'>
<EndFunc Name='DetectProductID' Return='0' GetLastError='0'>
PerfTime Stop: DetectProductID : Thu Feb 22 15:34:22 2007
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (A0:6C) [15:34:22:937]: Doing action: SetPIDKEY
Action ended 15:34:22: DetectProductID. Return value 1.
MSI (s) (A0:6C) [15:34:22:937]: PROPERTY CHANGE: Deleting PIDKEY property. Its current value is '**********'.
Action start 15:34:22: SetPIDKEY.
MSI (s) (A0:6C) [15:34:22:937]: Doing action: SetValidMOFInstanceNameProp.D20239D7_E87C_40C9_9837_E70B8D4882C2
Action ended 15:34:22: SetPIDKEY. Return value 1.
MSI (s) (A0:4C) [15:34:22:953]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2BA.tmp, Entrypoint: SetValidMOFInstanceNameProp
Action start 15:34:22: SetValidMOFInstanceNameProp.D20239D7_E87C_40C9_9837_E70B8D4882C2.
<Func Name='LaunchFunction'>
Function=SetValidMOFInstanceNameProp
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Doing Action: SetValidMOFInstanceNameProp
PerfTime Start: SetValidMOFInstanceNameProp : Thu Feb 22 15:34:23 2007
<Func Name='SetValidMOFInstanceNameProp'>
MSI (s) (A0!60) [15:34:23:109]: PROPERTY CHANGE: Adding ValidMOFInstanceName property. Its value is '1'.
Setting ValidMofInstanceName to 1
<EndFunc Name='SetValidMOFInstanceNameProp' Return='0' GetLastError='0'>
PerfTime Stop: SetValidMOFInstanceNameProp : Thu Feb 22 15:34:23 2007
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (A0:6C) [15:34:23:109]: Doing action: CostInitialize
Action ended 15:34:23: SetValidMOFInstanceNameProp.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1.
MSI (s) (A0:6C) [15:34:23:125]: Machine policy value 'MaxPatchCacheSize' is 10
Action start 15:34:23: CostInitialize.
MSI (s) (A0:6C) [15:34:23:125]: PROPERTY CHANGE: Adding ROOTDRIVE property. Its value is 'D:'.
MSI (s) (A0:6C) [15:34:23:125]: PROPERTY CHANGE: Adding CostingComplete property. Its value is '0'.
MSI (s) (A0:6C) [15:34:23:125]: Transforming table Component.

MSI (s) (A0:6C) [15:34:23:125]: Transforming table Component.

MSI (s) (A0:6C) [15:34:23:125]: Transforming table Component.

MSI (s) (A0:6C) [15:34:23:125]: Note: 1: 2205 2: 3: Patch
MSI (s) (A0:6C) [15:34:23:125]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (A0:6C) [15:34:23:125]: Note: 1: 2205 2: 3: MsiPatchHeaders
MSI (s) (A0:6C) [15:34:23:125]: Note: 1: 2205 2: 3: __MsiPatchFileList
MSI (s) (A0:6C) [15:34:23:125]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (A0:6C) [15:34:23:125]: Note: 1: 2228 2: 3: PatchPackage 4: SELECT `DiskId`, `PatchId`, `LastSequence` FROM `Media`, `PatchPackage` WHERE `Media`.`DiskId`=`PatchPackage`.`Media_` ORDER BY `DiskId`
MSI (s) (A0:6C) [15:34:23:125]: Doing action: SetFTSearchProperties.D20239D7_E87C_40C9_9837_E70B8D4882C2
Action ended 15:34:23: CostInitialize. Return value 1.
MSI (s) (A0:C4) [15:34:23:140]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2BC.tmp, Entrypoint: SetFTSearchProperties
Action start 15:34:23: SetFTSearchProperties.D20239D7_E87C_40C9_9837_E70B8D4882C2.
<Func Name='LaunchFunction'>
Function=SetFTSearchProperties
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Doing Action: SetFTSearchProperties
PerfTime Start: SetFTSearchProperties : Thu Feb 22 15:34:23 2007
<Func Name='SetFTSearchProperties'>
MSI (s) (A0!C0) [15:34:23:250]: PROPERTY CHANGE: Modifying FTERudeInstName.68C6D15C_77E0_11D5_8528_00C04F68155C property. Its current value is 'MSSQLSERVER'. Its new value: 'MSSQL.1'.
FTS Property Name: FTEInstName.68C6D15C_77E0_11D5_8528_00C04F68155C set
MSI (s) (A0!C0) [15:34:23:250]: PROPERTY CHANGE: Modifying FTERegRoot.68C6D15C_77E0_11D5_8528_00C04F68155C property. Its current value is 'SoftwareMicrosoftMSSQLSERVERMSSearch'. Its new value: 'SOFTWAREMicrosoftMicrosoft SQL ServerMSSQL.1MSSearch'.
FTS Property Name: FTERudeInstName.68C6D15C_77E0_11D5_8528_00C04F68155C set
MSI (s) (A0!C0) [15:34:23:250]: PROPERTY CHANGE: Adding FTEInstanceSubDir.68C6D15C_77E0_11D5_8528_00C04F68155C property. Its value is 'MSSQL.1MSSQL'.
FTS Property Name: FTERegRoot.68C6D15C_77E0_11D5_8528_00C04F68155C set
FTS Property Name: FTEInstanceSubDir.68C6D15C_77E0_11D5_8528_00C04F68155C set
FTS Property Name: FTEClusterSec.68C6D15C_77E0_11D5_8528_00C04F68155C set
<EndFunc Name='SetFTSearchProperties' Return='0' GetLastError='0'>
PerfTime Stop: SetFTSearchProperties : Thu Feb 22 15:34:23 2007
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (A0:6C) [15:34:23:265]: Doing action: FileCost
Action ended 15:34:23: SetFTSearchProperties.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1.
MSI (s) (A0:6C) [15:34:23:281]: Note: 1: 2262 2: Class 3: -2147287038
MSI (s) (A0:6C) [15:34:23:281]: Note: 1: 2262 2: Extension 3: -2147287038
MSI (s) (A0:6C) [15:34:23:281]: Note: 1: 2262 2: TypeLib 3: -2147287038
Action start 15:34:23: FileCost.
MSI (s) (A0:6C) [15:34:23:281]: Doing action: IsolateComponents
Action ended 15:34:23: FileCost. Return value 1.
Action start 15:34:23: IsolateComponents.
MSI (s) (A0:6C) [15:34:23:281]: Doing action: SQLLicensing.D20239D7_E87C_40C9_9837_E70B8D4882C2
Action ended 15:34:23: IsolateComponents. Return value 0.
MSI (s) (A0:50) [15:34:23:296]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2BD.tmp, Entrypoint: SQLLicensing
Action start 15:34:23: SQLLicensing.D20239D7_E87C_40C9_9837_E70B8D4882C2.
<Func Name='LaunchFunction'>
Function=SQLLicensing
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Doing Action: SQLLicensing
PerfTime Start: SQLLicensing : Thu Feb 22 15:34:23 2007
<Func Name='SQLLicensing'>
<EndFunc Name='SQLLicensing' Return='0' GetLastError='0'>
PerfTime Stop: SQLLicensing : Thu Feb 22 15:34:23 2007
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (A0:6C) [15:34:23:375]: Doing action: CAResolveInstanceName.68C6D15C_77E0_11D5_8528_00C04F68155C
Action ended 15:34:23: SQLLicensing.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1.
MSI (s) (A0:54) [15:34:23:390]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2BE.tmp, Entrypoint: ResolveInstanceName
Action start 15:34:23: CAResolveInstanceName.68C6D15C_77E0_11D5_8528_00C04F68155C.
FTECa.DLL: INFO: FTE: ResolveInstanceName(), Entering...
FTECa.DLL: INFO: FTE: This is NOT an Exchange Server install...
FTECa.DLL: INFO: ResolveInstanceName: FTEInstName obtained: MSSQLSERVER
FTECa.DLL: INFO: ResolveInstanceName: FTERudeInstName obtained: MSSQL.1
FTECa.DLL: INFO: LookupInstanceId: Iterating the key: 1
FTECa.DLL: ERROR: LookupInstanceId: RegQueryValueEx(RudeName) failed. Err = 2
Action ended 15:34:23: CAResolveInstanceName.68C6D15C_77E0_11D5_8528_00C04F68155C. Return value 3.
Action ended 15:34:23: INSTALL. Return value 3.
Property(S): ProductCode = {FFFA78A7-BD51-4255-8470-C4D4A85B49F5}
Property(S): ProductLanguage = 1033
Property(S): Manufacturer = Microsoft Corporation
Property(S): ProductVersion = 9.00.1399.06
Property(S): MEDIAPACKAGEPATH = Setup
Property(S): ALLUSERS = 1
Property(S): NULLGUID = {00000000-0000-0000-0000-000000000000}
Property(S): ASPNetVersion = 2.0.50727
Property(S): ARPHELPLINK = http://go.microsoft.com/fwlink/?LinkId=52152
Property(S): ARPPRODUCTICON = ARPIcon.ico
Property(S): ARPNOREPAIR = 1
Property(S): ARPSYSTEMCOMPONENT = 1
Property(S): MsiHiddenProperties = SQLPASSWORD;AGTPASSWORD;ASPASSWORD;RSPASSWORD;SQLBROWSERPASSWORD;RSSQLPASSWORD;RSSQLPassword;RSSQLPasswordQuoted;RSSETUPPASSWORD;RSSetupPassword;SAPWD;saPWD;UPGRADEPWD;SqlUpgradePwd;SQLPassword;ServicePassword;ADMINPASSWORD;PIDKEY;FTEPassword.68C6D15C_77E0_11D5_8528_00C04F68155C;checksum.7354AFCB_913B_4E9F_B76C_2376101FDE0C;checksum.;DigitalProductID;DPID;Do_sqlScript.D20239D7_E87C_40C9_9837_E70B8D4882C2;Rollback_SqlConnection.D20239D7_E87C_40C9_9837_E70B8D4882C2;Do_XmlSingleNode.D20239D7_E87C_40C9_9837_E70B8D4882C2;Do_RSSetting.D20239D7_E87C_40C9_9837_E70B8D4882C2;PID;ProductID;RSUPGRADEPASSWORD;Do_RSSetSharePointExclusionPath.D20239D7_E87C_40C9_9837_E70B8D4882C2
Property(S): SecureCustomProperties = SQL_SHOWLIC;UPGRADESQL90
Property(S): SqlServerBuild = 1
Property(S): SqlCluster = 0
Property(S): INSTALLLEVEL = 90
Property(S): FXAssemblyVersion = 2.0.0.0
Property(S): VSAssemblyVersion = 8.0.0.0
Property(S): SqlErrorReporting = #0
Property(S): SqlSqmReporting = #0
Property(S): SqlEnableRanu = 1
Property(S): SqlPatchLevel = 9.00.1399.06
Property(S): ChannelID = 271
Property(S): PIDTemplate = 77654<````=````=````=````=`````>@@@@@
Property(S): mpc = 77654
Property(S): OEMRelease = 0
Property(S): SQLSETUPBOOTSTRAPSETUPPATH = C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe
Property(S): SQLSETUPARPWRAPPER = C:Program FilesMicrosoft SQL Server90Setup BootstrapARPWrapper.exe
Property(S): UPGRADE_ADVISOR_CMD32 = C:Program FilesMicrosoft SQL Server90Setup Bootstrap
Property(S): SQLIEMINVERSION = C:WINDOWSsystem32shdocvw.dll
Property(S): ProgramFilesFolder = C:Program Files
Property(S): ProductID = **********
Property(S): DigitalProductID = **********
Property(S): INSTALLSQLDIR = D:Program FilesMicrosoft SQL Server
Property(S): INSTALLSQLDATADIR = D:Program FilesMicrosoft SQL Server
Property(S): SqlCollation = Latin1_General_CI_AS
Property(S): SqlInstanceName = MSSQLSERVER
Property(S): saSetAutoSAPWDAndDisable = 1
Property(S): ShowPID = 1
Property(S): MDACSXS = 1
Property(S): DefaultUIFont = Tahoma8
Property(S): VersionNT = 502
Property(S): LocalSystemAccount = NT AUTHORITYSYSTEM
Property(S): DefaultBuiltInAccount = LocalSystemAccount
Property(S): NetworkServiceAccount = NT AUTHORITYNETWORK SERVICE
Property(S): LocalServiceAccount = NT AUTHORITYLOCAL SERVICE
Property(S): INSTALLSQLSHAREDDIR = D:Program FilesMicrosoft SQL Server
Property(S): UI_INSTALLSQLSHAREDDIR = D:Program FilesMicrosoft SQL Server
Property(S): SimpleFeatureTitle_Feat1 = SQL Server Database Services
Property(S): SqlDisableNetworkProtocols = 2
Property(S): SimpleFeature_SQLEngineVS = Create a SQL Server failover cluster
Property(S): SimpleFeature_Feat1 = &SQL Server Database Services
Property(S): Service_AGT = SQL Server Agent
Property(S): Service_OLAP = SQL Server Analysis Services
Property(S): Service_SQL = SQL Server
Property(S): Service_RS = SQL Server Reporting Services
Property(S): Service_Browse = SQL Server Browser
Property(S): Service_DTS = SQL Server Integration Services
Property(S): Service_ADHelper = SQL Server Active Directory Helper
Property(S): Service_SQLWriter = SQL Server VSS Writer
Property(S): Service_FTS = SQL Server FullText Search
Property(S): ServiceDesc_RS = Manages, executes, renders, schedules and delivers reports.
Property(S): ServiceDesc_AGT = Executes jobs, monitors SQL Server, and fires alerts, and allows automation of some administrative tasks.
Property(S): ServiceDesc_SQL = Provides storage, processing and controlled access of data and rapid transaction processing.
Property(S): ServiceDesc_Browse = Provides SQL Server connection information to client computers.
Property(S): ServiceDesc_OLAP = Supplies online analytical processing (OLAP) and data mining functionality for business intelligence applications.
Property(S): ServiceDesc_DTS = Provides management support for SSIS package storage and execution.
Property(S): ServiceDesc_ADHelper = Enables integration with Active Directories.
Property(S): ServiceDesc_SQLWriter = Provides the interface to backup/restore Microsoft SQL server through the Windows VSS infrastructure.
Property(S): ServiceDesc_FTS = Quickly creates full-text indexes on content and properties of structured and semi-structured data to allow fast linguistic searches on this data.
Property(S): ServiceGroupDesc_ADHelper = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Active Directory Helper in SQL Server 2005.
Property(S): ServiceGroupDesc_AGT = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Agent in SQL Server 2005.
Property(S): ServiceGroupDesc_OLAP = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Analysis Services in SQL Server 2005.
Property(S): ServiceGroupDesc_Browse = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Browser in SQL Server 2005.
Property(S): ServiceGroupDesc_DTS = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Integration Services in SQL Server 2005.
Property(S): ServiceGroupDesc_FTS = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server and SQL Server FullText Search in SQL Server 2005.
Property(S): ServiceGroupDesc_NS = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Notification Services in SQL Server 2005.
Property(S): ServiceGroupDesc_RS = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Reporting Services in SQL Server 2005.
Property(S): ServiceGroupDesc_RSWeb = Members in the group have the required access to be assigned as the log on account for the associated instance of SQL Server Reporting Services in SQL Server 2005
Property(S): ServiceGroupDesc_SQL = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server and SQL Server FullText Search in SQL Server 2005.
Property(S): ServiceGroupDesc_SQL_NEW = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server in SQL Server 2005.
Property(S): ServiceGroupDesc_FTS_NEW = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Full Text Search in SQL Server 2005.
Property(S): DlgService_AGT = SQL Server Agent
Property(S): DlgService_OLAP = Analysis Services
Property(S): DlgService_SQL = SQL Server
Property(S): DlgService_RS = Reporting Services
Property(S): DlgService_Browse = SQL Browser
Property(S): AutoStart_AGT = SQL Server A&gent
Property(S): AutoStart_OLAP = &Analysis Services
Property(S): AutoStart_SQL = &SQL Server
Property(S): AutoStart_RS = Rep&orting Services
Property(S): AutoStart_Browse = SQL Bro&wser
Property(S): AutoStart_FTS = SQL Server &FullText Search
Property(S): _AuthenticationType = Windows
Property(S): SQL_rgCollation = 1
Property(S): OLAP_rgCollation = 0
Property(S): _InstanceType = Default
Property(S): _LicensingMode = PerSeat
Property(S): AGTLogin = DomainAccount
Property(S): ASLogin = DomainAccount
Property(S): SingleLogin = DomainAccount
Property(S): SQLLogin = DomainAccount
Property(S): RSLogin = DomainAccount
Property(S): SQLBROWSERLogin = DomainAccount
Property(S): _UpgradeLogon = Windows
Property(S): _SampleDBMode = InstallSD
Property(S): ButtonTextStyle = {ButtonTextStyle}
Property(S): DlgTextStyle = {DlgTextStyle}
Property(S): DlgTextStyleB = {DlgTextStyleB}
Property(S): DlgTitleStyle = {DlgTitleStyle}
Property(S): DlgTitleStyleB = {DlgTitleStyleB}
Property(S): FixedStyle = {FixedStyle}
Property(S): T_DataFree = T_DataFree
Property(S): T_DataReq = T_DataReq
Property(S): T_ProgramFree = T_ProgramFree
Property(S): T_ProgramReq = T_ProgramReq
Property(S): T_IPVal = T_IPVal
Property(S): T_Subnet = T_Subnet
Property(S): ErrorDialog = ErrorDlg
Property(S): TextVSName = &Virtual server name:
Property(S): ENABLERANU = 1
Property(S): AccountForAllNodesDlg_Desc = Account for remote setup.
Property(S): AccountForAllNodesDlg_Text = Enter a user name and password that is a valid administrator account for all nodes in the cluster system. This will be used during setup only.
Property(S): AccountForAllNodesDlg_Title = Remote Account Information
Property(S): Authentication_ConfirmPWText = Confirm &password:
Property(S): Authentication_DlgDesc = The authentication mode specifies the security used when connecting to SQL Server.
Property(S): Authentication_DlgText = Select the authentication mode to use for this installation.
Property(S): Authentication_DlgTitle = Authentication Mode
Property(S): Authentication_EnterPWText = &Enter password:
Property(S): Authentication_saPasswordText = Specify the sa logon password below:
Property(S): Authentication_SQL = &Mixed Mode (Windows Authentication and SQL Server Authentication)
Property(S): Authentication_Windows = &Windows Authentication Mode
Property(S): BrowseFolder_ComboText = &Install in:
Property(S): BrowseFolder_DlgDesc = You can select a different folder for installation.
Property(S): BrowseFolder_DlgTitle = Change Folders
Property(S): BrowseFolder_TailText = Installation &path:
Property(S): BrowseFolder_TailTextShared = The SQL Server shared path has already been configured.
Property(S): ButtonText_Abort = &Abort
Property(S): ButtonText_Add = &Add
Property(S): ButtonText_Back = < &Back
Property(S): ButtonText_Browse = B&rowse...
Property(S): ButtonText_Cancel = Cancel
Property(S): ButtonText_Close = &Close
Property(S): ButtonText_Complete = &Complete
Property(S): ButtonText_ContinueLater = &Continue Later
Property(S): ButtonText_DiskCost = &Disk Cost...
Property(S): ButtonText_Exit = &Exit
Property(S): ButtonText_Finish = &Finish
Property(S): ButtonText_Help = &Help
Property(S): ButtonText_Ignore = &Ignore
Property(S): ButtonText_Install = &Install
Property(S): ButtonText_Minimal = &Minimal
Property(S): ButtonText_New = &New
Property(S): ButtonText_Next = &Next >
Property(S): ButtonText_No = &No
Property(S): ButtonText_Normal = &Normal
Property(S): ButtonText_OK = OK
Property(S): ButtonText_Open = &Open
Property(S): ButtonText_Reinstall = &Reinstall
Property(S): ButtonText_ReinstallMode = &Select the reinstall mode
Property(S): ButtonText_Remove = &Remove
Property(S): ButtonText_Remove2 = &Remove
Property(S): ButtonText_Report = &Report
Property(S): ButtonText_Reset = &Reset
Property(S): ButtonText_Restore = &Restore
Property(S): ButtonText_Resume = &Resume
Property(S): ButtonText_Retry = &Retry
Property(S): ButtonText_Up = &Up
Property(S): ButtonText_Yes = &Yes
Property(S): Cancel_DlgDesc = Are you sure you want to cancel the installation?
Property(S): Cancel_DlgText = The installation is not complete. If you exit the wizard now, Microsoft SQL Server will not be installed.
Property(S): ClusterGroup_DlgDesc = Select the cluster group where the virtual server resources will be installed.
Property(S): ClusterGroup_DlgStaticTextAvailable = Available cluster groups:
Property(S): ClusterGroup_DlgStaticTextUnavailable = Unavailable cluster groups:
Property(S): ClusterGroup_DlgTitle = Cluster Group Selection
Property(S): ClusterNodeDlg_ButtonTextAdd = &Add ->
Property(S): ClusterNodeDlg_ButtonTextRemove = <- &Remove
Property(S): ClusterNodeDlg_StaticTextAvailableNode = Available nodes:
Property(S): ClusterNodeDlg_StaticTextRequiredNode = Required node:
Property(S): ClusterNodeDlg_StaticTextSelectedNode = Selected nodes:
Property(S): ClusterNodeDlg_StaticTextUnavailableNode = Unavailable nodes:
Property(S): ClusterNodeDlg_Text = Select the nodes to include in the virtual server.
Property(S): ClusterNodeDlg_Title = Cluster Node Configuration
Property(S): Collation_Service = S&ervice:
Property(S): Collation_Service1 = Collation settings for service:
Property(S): Collation_AS_Collation = Analysis Services Collation:
Property(S): Collation_ChkBinary = Binary
Property(S): Collation_ChkBinary2 = Binary - code point
Property(S): Collation_ChkCase = Case - sensitive
Property(S): Collation_ChkAccent = Accent - sensitive
Property(S): Collation_ChkKana = Kana - sensitive
Property(S): Collation_ChkWidth = Width - sensitive
Property(S): Collation_Designator = Collation &designator and sort order:
Property(S): Collation_DlgDesc = Collation settings define the sorting behavior for your server.
Property(S): Collation_DlgCusomizeText = &Customize for each service account
Property(S): Collation_DlgTitle = Collation Settings
Property(S): Collation_SQL = &SQL collations (used for compatibility with previous versions of SQL Server)
Property(S): DiskPrompt = Please insert next disk
Property(S): DiskSpace_DlgDesc = Disk space required for the installation exceeds available disk space.
Property(S): DiskSpace_DlgDesc1 = The available disk space and the space required for installation are shown below.
Property(S): DiskSpace_DlgText = The highlighted volumes, if any, do not have enough disk space available for the currently selected features. Click Disk Cleanup to free disk space and then click Resume to continue the installation, or click Exit to exit the wizard.
Property(S): DiskSpace_DlgTitle = Out of Disk Space
Property(S): DiskSpace_DlgTitle1 = Disk Cost
Property(S): DiskSpace_LBDiskCleanup = Use disk cleanup to free more disk space by removing unneeded files.
Property(S): REASON_ADMIN_DISABLED = Administrative shares must be enabled in order to let Setup access remote nodes
Property(S): REASON_DARWIN_VER = Windows installer is not present or has not the required version
Property(S): REASON_DUP_INSTANCE_NAME_CLST = An instance with the same name is already installed in one or more nodes of the cluster.
Property(S): REASON_GROUP_HOSTS_VS = Already contains a SQL Virtual Server
Property(S): REASON_GROUP_NO_DISK = Does not contain any valid cluster disk
Property(S): ERROR_INVALID_PID = This is an invalid Product Key value. Please check the number located on your Product Key sticker.
Property(S): ERROR_INVALID_USERNAME = The Name is required for the installation.
Property(S): REASON_NODE_DOWN = The node is down or unavailable
Property(S): REASON_NOT_KNOWN = Unknown
Property(S): REASON_PENDING_REBOOT = The node must be rebooted before running setup
Property(S): REASON_SCC_CHECK_FAILED = A SCC check failed on the node
Property(S): ERROR_UNKNOWN = Installation error. Install it by running setup.exe.
Property(S): REASON_VERSION_ADDNODE = Adding nodes to the Virtual Server definition using a newer version of Setup is not allowed.
Property(S): REASON_OS_VER = SQL Server requires Windows 2000 Service Pack 4, or Windows XP Service Pack 1 or later for installation.
Property(S): REASON_OS_TYPE = This version of SQL Server is not supported on this version of Windows.
Property(S): Exit_DlgDesc1 = Setup has installed Microsoft SQL Server successfully. Click Finish to exit.
Property(S): Exit_DlgDesc2 = Setup has removed Microsoft SQL Server successfully. Click Finish to exit.
Property(S): Exit_DlgDesc3 = Setup has updated Microsoft SQL Server successfully. Click Finish to exit.
Property(S): Exit_DlgDesc4 = Setup has reinstalled Microsoft SQL Server successfully. Click Finish to exit.
Property(S): Exit_DlgDesc5 = Setup has upgraded Microsoft SQL Server successfully. Click Finish to exit.
Property(S): Exit_DlgTitle = Completing Microsoft SQL Server Setup
Property(S): SimpleFeature_DlgDesc = Select the components to install or upgrade.
Property(S): SimpleFeature_DlgTitle = Components to Install
Property(S): SimpleFeature_Feat2 = &Analysis Services
Property(S): SimpleFeature_AnalysisServerVS = Create an Analysis Server failover cluster
Property(S): SimpleFeature_Feat3 = &Reporting Services
Property(S): SimpleFeature_Feat4 = N&otification Services
Property(S): SimpleFeature_Feat5 = &Integration Services
Property(S): SimpleFeature_Feat6 = &Workstation components, Books Online and development tools
Property(S): SimpleFeatureTitle_Feat2 = Analysis Services
Property(S): SimpleFeatureTitle_Feat3 = Reporting Services
Property(S): SimpleFeatureTitle_Feat4 = Notification Services
Property(S): SimpleFeatureTitle_Feat5 = Integration Services
Property(S): SimpleFeatureTitle_Feat6 = Client Components
Property(S): SimpleFeature_Advanced = A&dvanced
Property(S): SimpleFeature_AdvancedText = For more options, click Advanced.
Property(S): SimpleFeature_Components = Components to be installed
Property(S): SimpleFeature_OutOfSpace = There is not enough disk space to install the selected components. Click Advanced for more options.
Property(S): Feature_DlgDesc = Select the program features you want installed.
Property(S): Feature_DlgText = Click an icon in the following list to change how a feature is installed.
Property(S): Feature_DlgTitle = Feature Selection
Property(S): Feature_FeatureFrame = Feature description
Property(S): Feature_GroupBox1 = Installation path
Property(S): FileInUse_DlgDesc = Some files that need to be updated are currently in use.
Property(S): FileInUse_DlgText = The following applications are using files that need to be updated by this setup. Close these applications and click Retry to continue.
Property(S): FileInUse_DlgTitle = Files in Use
Property(S): InitDlg_Title = Microsoft SQL Server Installation
Property(S): InitDlg_Desc = Setup is preparing to continue with the installation.
Property(S): InitDlg_Text = Please wait while setup prepares to continue with the installation.
Property(S): Instance_Default = &Default instance
Property(S): Instance_DlgDesc = You can install a default instance or you can specify a named instance.
Property(S): Instance_DlgText = Provide a name for the instance. For a default installation, click Default instance and click Next. To upgrade an existing default instance, click Default instance. To upgrade an existing named instance select Named instance and specify the instance name.
Property(S): Instance_DlgText1 = To view a list of existing instances and components click on Installed instances.
Property(S): Instance_DlgTitle = Instance Name
Property(S): Instance_Named = N&amed instance
Property(S): IPAddress_DlgDesc = Enter virtual server information.
Property(S): IPAddress_DlgStaticTextClusterIP = Network address:
Property(S): IPAddress_DlgStaticTextIPAddress = &IP address:
Property(S): IPAddress_DlgStaticTextIPSel = &Selected networks and IP addresses:
Property(S): IPAddress_DlgStaticTextNetToUse = N&etwork to use:
Property(S): IPAddress_DlgStaticTextSubnet = Network subnet:
Property(S): IPAddress_DlgStaticTextVSName = Virtual server name:
Property(S): IPAddress_DlgText = Enter an IP address for the virtual server. To add IP addreses for additional networks, click Add.
Property(S): IPAddress_DlgTitle = Virtual Server Configuration
Property(S): License_Devices = devices
Property(S): License_Processors = processors
Property(S): LicenseModeDlg_DlgDesc = SQL server supports two client licensing modes: per seat licensing and processor licensing.
Property(S): LicenseModeDlg_DlgText = Choose the appropriate licensing modes.
Property(S): LicenseModeDlg_DlgText1 = Per seat license: each device that accesses Microsoft SQL Server requires a separate license.
Property(S): LicenseModeDlg_DlgText2 = Processor license: each processor on this server requires a separate license.
Property(S): LicenseModeDlg_DlgTitle = Licensing Mode
Property(S): LicenseModeDlg_Processor = &Processor license for
Property(S): LicenseModeDlg_RadioButtonGroup = Licensing mode
Property(S): LicenseModeDlg_Seat = Per &seat license for
Property(S): Maintenance_ChgLabel = Ch&ange Installed Components
Property(S): Maintenance_ChgLabelCl = &Maintain the Virtual Server
Property(S): Maintenance_ChgText = Maintain features of this instance.
Property(S): Maintenance_ChgTextCl = Add or remove nodes to the virtual server.
Property(S): Maintenance_DlgDesc = You can change or remove this instance of SQL Server.
Property(S): Maintenance_DlgTitle = Change or Remove Instance
Property(S): Maintenance_RmvLabel = R&emove Microsoft SQL Server
Property(S): Maintenance_RmvText = Remove all features of this existing installation from your computer.
Property(S): Maintenance_RmvTextCl = Remove the virtual server from your cluster.
Property(S): Maintenance_ChgLabelResume = Complete the &suspended installation
Property(S): Maintenance_ChgTextResume = Complete the suspended installation of Microsoft SQL Server on your computer.
Property(S): Progress_DlgDesc1 = The program features you selected are being installed.
Property(S): Progress_DlgDesc2 = The Microsoft SQL Server is being removed.
Property(S): Progress_DlgDesc3 = Setup is installing the components you selected.
Property(S): Progress_DlgDesc4 = The Microsoft SQL Server is being reinstalled.
Property(S): Progress_DlgText1 = Please wait while Setup installs Microsoft SQL Server. Installation may take several minutes.
Property(S): Progress_DlgText2 = Please wait while Setup removes Microsoft SQL Server. This may take several minutes.
Property(S): Progress_DlgText3 = Please wait while Setup updates Microsoft SQL Server. This may take several minutes.
Property(S): Progress_DlgText4 = Please wait while Setup reinstalls Microsoft SQL Server. Installation may take several minutes.
Property(S): Progress_DlgTitle1 = Installing Microsoft SQL Server
Property(S): Progress_DlgTitle2 = Removing Microsoft SQL Server
Property(S): Progress_DlgTitle3 = Configuring Microsoft SQL Server
Property(S): Progress_DlgTitle4 = Reinstalling Microsoft SQL Server
Property(S): Progress_lbStatus = Status:
Property(S): Register_CompLabel = C&ompany:
Property(S): Register_DlgSpec = The following information will personalize your installation.
Property(S): Register_DlgText = The Name field must be filled in prior to proceeding. The Company field is optional.
Property(S): Register_DlgText1 = Please enter your 25 character Product Key. You can find this number on the yellow sticker in the CD liner notes or the CD sleeve.
Property(S): Register_DlgTitle = Registration Information
Property(S): Register_NameLabel = N&ame:
Property(S): Resume_ResumeText = Setup will complete the suspended installation of Microsoft SQL Server on your computer. To continue, click Next.
Property(S): Resume_TextLine1 = Microsoft SQL Server Installation Wizard
Property(S): ServiceAccountDlg_Advanced = &Customize for each service account
Property(S): ServiceAccountDlg_Autostart = Start services at the end of setup
Property(S): ServiceAccountDlg_AutostartServices = Start services at the end of setup
Property(S): ServiceAccountDlg_DlgDesc = Service accounts define which accounts to log in.
Property(S): ServiceAccountDlg_DlgTitle = Service Account
Property(S): ServiceAccountDlg_Domain = Use a domain use&r account
Property(S): ServiceAccountDlg_DomainLabel = &Domain:
Property(S): ServiceAccountDlg_BuiltIn = Use the built-in S&ystem account
Property(S): ServiceAccountDlg_PasswordLabel = &Password:
Property(S): ServiceAccountDlg_Service = S&ervice:
Property(S): ServiceAccountDlg_Service1 = Service:
Property(S): ServiceAccountDlg_UsernameLabel = &Username:
Property(S): Setup = Setup
Property(S): StartCopy_DlgDesc = Setup is ready to begin installation.
Property(S): StartCopy_DlgDescReinst = Setup is ready to begin reinstallation.
Property(S): StartCopy_DlgDescRemove = You have chosen to remove the program from your system.
Property(S): StartCopy_DlgDescRemoveCl = You have chosen to remove the program from your cluster.
Property(S): StartCopy_DlgDescVSConfig = Setup is ready to begin updating your virtual server.
Property(S): StartCopy_DlgText = Setup has enough information to start copying the program files. To proceed, click Install. To change any of your installation settings, click Back. To exit setup, click Cancel.
Property(S): StartCopy_DlgText2 = Click Cancel to exit setup.
Property(S): StartCopy_DlgTextConfig = Setup has enough information to start installation. Click Install to proceed.
Property(S): StartCopy_DlgTextReinstData = You have chosen to re-install all features of existing installation including data files, and therefore overwrite the system database. Click Reinstall to proceed.
Property(S): StartCopy_DlgTextReinst = You have chosen to re-install all features of existing installation. Click Reinstall to proceed.
Property(S): StartCopy_DlgTextRemove = Click Remove to remove Microsoft SQL Server from your computer. After removal, this program will no longer be available for use.
Property(S): StartCopy_DlgTextRemoveCl = Click Remove to remove Microsoft SQL Server from your cluster. After removal, this program will no longer be available for use.
Property(S): StartCopy_DlgTextUnchanged = You did not change your virtual server configuration.
Property(S): StartCopy_DlgTitle = Ready to Install
Property(S): StartCopy_DlgTitleConfig = Ready to Update
Property(S): StartCopy_DlgTitleReinst = Ready to Reinstall
Property(S): StartCopy_DlgTitleRemove = Remove Microsoft SQL Server
Property(S): StaticUserName = Account:
Property(S): StaticUserPassword = &Password:
Property(S): TextDataDir = &Data files:
Property(S): TextProgramFileDir = Program files:
Property(S): UpgradeLogon_DlgDesc = Database account for upgrading.
Property(S): UpgradeLogon_DlgText = The authentication mode specifies the security used when connecting to SQL Server during database upgrading.
Property(S): UpgradeLogon_DlgTitle = Upgrade Logon Information
Property(S): UpgradeLogon_Password = &Password:
Property(S): UpgradeLogon_SQL = &SQL Server Authentication Mode
Property(S): UpgradeLogon_SQLText = Enter SQL Server account:
Property(S): UpgradeLogon_UserName = &Username:
Property(S): UpgradeLogon_Windows = &Windows Authentication Mode
Property(S): UserExit_FinishText1 = To complete installation at another time, please run setup again.
Property(S): UserExit_FinishText2 = Click Finish to exit setup.
Property(S): UserExit_RestContText1 = You can either keep any existing installed elements on your system to continue this installation at a later time or you can restore your system to its original state prior to the installation.
Property(S): UserExit_RestContText2 = Click Restore or Continue Later to exit the installation wizard.
Property(S): UserExit_TextLine = Setup was interrupted before Microsoft SQL Server could be completely installed.
Property(S): VirtualServer_DlgDesc = The virtual server name must be unique on the network.
Property(S): VirtualServer_DlgText = Enter the name of the new virtual server.
Property(S): VirtualServer_DlgTitle = Virtual Server Name
Property(S): WARNING_QUORUMGROUP1 = You have chosen the group containing the quorum resource. It is strongly recommended that you should not use the quorum group with SQL Server.
Property(S): WARNING_QUORUMGROUP2 = Are you sure you want to proceed?
Property(S): DWTITLENAME = Microsoft SQL Server Setup
Property(S): DWHEADERTEXT = Microsoft SQL Server Setup was unable to install on your computer.
Property(S): DWERRORTEXT = Microsoft SQL Server Setup has encountered a problem and will end.
Property(S): ErrorDlg_Title = Microsoft SQL Server Setup
Property(S): Wait_Title = Please wait...
Property(S): Wait_Database = Validating settings.
Property(S): Wait_Service = Starting Service: [1]
Property(S): Wait_Connect = Validating database access on SQL Server [1].
Property(S): ErrorReporting_DlgDesc = Help Microsoft improve some of the SQL Server 2005 components and services.
Property(S): ErrorReporting_DlgText1 = For more information on the error reporting feature and the type of information sent, click Help.
Property(S): ErrorReporting_DlgText1_Property = ErrorReporting_DlgText1
Property(S): ErrorReporting_DlgText1_Express = By installing Microsoft SQL Server 2005, SQL Server and its components will be configured to automatically send fatal service error reports to Microsoft or a Corporate Error Reporting Server. Microsoft uses error reports to improve SQL Server functionality, and treats all information as confidential.
Property(S): ErrorReporting_DlgTitle = Error and Usage Report Settings
Property(S): ErrorReporting_CheckBox = &Automatically send Error reports for SQL Server 2005 to Microsoft or your corporate error reporting server. Error reports include information regarding the condition of SQL Server 2005 when an error occurred, your hardware configuration and other data. Error reports may unintentionally include personal information, which will not be used by Microsoft.
Property(S): ErrorReporting_SQM_CheckBox = Automatically send &Feature Usage data for SQL Server 2005 to Microsoft. Usage data includes anonymous information about your hardware configuration and how you use our software and services.
Property(S): EnableRanu_DlgDesc = Configure Run As Normal User mode.
Property(S): EnableRanu_DlgText1 = Allow users who do not have administrator privileges to run a separate instance of the Database Engine.
Property(S): EnableRanu_DlgText1_Property = EnableRanu_DlgText1
Property(S): EnableRanu_DlgTitle = User Instances
Property(S): EnableRanu_CheckBox = &Enable User Instances
Property(S): BrowseFolder_VolumeList = Program files must be installed on a valid local disk available on all cluster nodes. The volumes values are:
Property(S): ProductClash_DlgTitle = Existing components
Property(S): ProductClash_DlgDesc = Components have been found on the machine. Select upgrade options below.
Property(S): ProductClash_DlgText = The following components that you chose to install are already installed on the machine. To view a report of available options and alternatives click on Details.
Property(S): ProductClash_Detail = &Details...
Property(S): ProductClash_Warning = Components shared between SQL Server instances will be removed if they belong only to the SQL Server instance being upgraded.
Property(S): ProductClash_LegacyTools = Management Tools
Property(S): ProductClash_LegacyDTS = Data Transformation Services
Property(S): DetailDlg_DlgTitle = Installation options
Property(S): DetailDlg_DlgDesc = The list below shows installed components and upgrade options.
Property(S): InstanceListDlg_DlgTitle = Installed instances
Property(S): InstanceListDlg_DlgDesc = The list below contains all existing instances and components installed on this machine.
Property(S): InstanceListDlg_InstanceListText = To view details for an installed instance, select an instance from the list below. To proceed, select the instance name to upgrade and click OK.
Property(S): InstanceListDlg_TypeText = Type:
Property(S): InstanceListDlg_VersionText = Version:
Property(S): InstanceListDlg_EditionText = Edition:
Property(S): InstanceListDlg_LanguageText = Language:
Property(S): InstanceListDlg_DetailGroup = Installed Instance Details
Property(S): Instance_Instances = &Installed instances
Property(S): Product_YukonServer = Yukon Server
Property(S): Product_SQLServer = SQL Server
Property(S): Product_AnalysisServices = Analysis Services
Property(S): Product_ReportServer = Reporting Services
Property(S): ProductClash_Maintain = (Cannot maintain product, to maintain the product go to Add or Remove Programs)
Property(S): ProductClash_Upgrade = (Cannot upgrade product, to maintain the product go to Add or Remove Programs)
Property(S): ProductClash_UpgradeAsVS = (Upgrade product to Virtual Server)
Property(S): ProductClash_Virtualize = (Cannot virtualize product)
Property(S): Detail_Name = Name:
Property(S): Detail_AllowedAction = Allowed Action:
Property(S): Detail_Reason = Reason:
Property(S): Detail_Warning = Warning:
Property(S): Detail_ActionMaintain = Maintain (Action is only available from Add or Remove Programs)
Property(S): Detail_ReasonMaintain = Cannot maintain product, to maintain the product go to Add or Remove Programs
Property(S): Detail_ActionUpgrade = Upgrade
Property(S): Detail_ReasonUpgrade = Product can be upgraded to a new version
Property(S): Detail_ActionNone = None
Property(S): Detail_ReasonNoVirtualize = Product cannot be virtualized
Property(S): Detail_ReasonNone = Upgrades are not supported yet
Property(S): Detail_ReasonBlock = Your upgrade is blocked. For more information about upgrade support, see the "Version and Edition Upgrades" and "Hardware and Software Requirements" topics in SQL Server 2005 Setup Help or SQL Server 2005 Books Online.
Property(S): Detail_ReasonRemoveDTS = The SQL Server instance you are upgrading includes Data Transformation Services. Following the upgrade, Data Transformation Services will be removed unless there are other SQL Server instances installed that share it. Click on help for more information.
Property(S): Detail_ReasonRemoveTools = The SQL Server instance you are upgrading includes SQL Server Management Tools. Following the upgrade, previous versions of SQL Server Management Tools will be removed unless there are other SQL Server instances installed that share them. Do not use previous versions of SQL Server Management Tools with SQL Server 2005. Instead, use SQL Server 2005 Management Tools included in the SQL Server 2005 Workstation Components feature.
Property(S): SampleDatabase_DlgDesc = Configure how the sample databases are installed.
Property(S): SampleDatabase_DlgText = Specify a method to install the sample databases to an existing instance of SQL Server. To attach the sample databases, you must have permissions to create databases on the specified instance.
Property(S): SampleDatabase_DlgTitle = Sample Databases Setup
Property(S): SampleDatabase_ServerText = &SQL Server instance:
Property(S): SampleDatabase_Install = &Install sample databases without attaching
Property(S): SampleDatabase_Attach = Install and &attach sample databases
Property(S): Report_ActionUpgrade = Upgrade
Property(S): Report_ActionVirtualize = Virtualize
Property(S): Report_InstallTitle = The following components will be installed:
Property(S): Report_BlockTitle = The following components that you selected will not be changed:
Property(S): Report_WarnSPTitle = Warning: Setup found that the following components that already exist are at a different service pack level than the components being installed.
Property(S): Report_WarnSPCompList = Components:
Property(S): Report_WarnSPTail = After completing setup, you must download and apply the latest SQL Server 2005 service pack to all the components.
Property(S): UpgradeTools = Upgrading tools [1]
Property(S): UpgradeRepl = Upgrading replication [1]
Property(S): UpgradeEngine = Upgrading SQL Engine [1]
Property(S): UpgradeDTS = Upgrading DTS [1]
Property(S): HideAdvancedOptionsText = Hi&de advanced configuration options
Property(S): ArpProductDispayName = Microsoft SQL Server 2005
Property(S): Built_inLocalSystem = Local system
Property(S): Built_inNetworkService = Network service
Property(S): Built_inLocalService = Local service
Property(S): Wait_UpgradeBlocker_Title = Analyzing Upgrade
Property(S): Wait_UpgradeBlocker_Status = Validating Upgrade Options.
Property(S): UpgradeBlockerDlg_DlgDesc = The following issues currently block upgrading to SQL Server 2005
Property(S): UpgradeBlockerDlg_DlgTitle = Upgrade Blocked
Property(S): UpgradeBlockerDlg_UAWarning = For assistance in resolving these issues, run Upgrade Advisor. You can install Upgrade Advisor from the SQL Server 2005 Setup Splash Screen.
Property(S): DomainGroup_DlgTitle = Domain Groups for Clustered Services
Property(S): DomainGroup_DlgText = The startup account for each clustered service will be added to the DomainNameGroupName to set its access control. Enter the name of existing DomainNameGroupName for each clustered service being installed. For additional information, click Help.
Property(S): DomainGroup_Browse = ...
Property(S): DomainGroupDlg_Service = Service Name
Property(S): DomainGroupDlg_Group = DomainNameGroupName
Property(S): SqlDomainGroup_SQL = &SQL Server
Property(S): SqlDomainGroup_AGT = S&QL Server Agent
Property(S): SqlDomainGroup_FTS = &Full-Text Search
Property(S): SqlDomainGroup_AS = &Analysis Services
Property(S): SqlDomainGroupService_SQL = SQL Server
Property(S): SqlDomainGroupService_AGT = SQL Server Agent
Property(S): SqlDomainGroupService_FTS = Full-Text Search
Property(S): SqlDomainGroupService_AS = Analysis Services
Property(S): SqlSortId030 = Binary order, for use with the 437 (U.S. English) Character Set.
Property(S): SqlSortId031 = Dictionary order, case-sensitive, for use with the 437 (U.S. English) Character Set.
Property(S): SqlSortId032 = Dictionary order, case-insensitive, for use with the 437 (U.S. English) Character Set.
Property(S): SqlSortId033 = Dictionary order, case-insensitive, uppercase preference, for use with the 437 (U.S. English) Character Set.
Property(S): SqlSortId034 = Dictionary order, case-insensitive, accent-insensitive, for use with the 437 (U.S. English) Character Set.
Property(S): SqlSortId035 = Binary order based on code point comparison, for use with the 437 (U.S. English) Character Set.
Property(S): SqlSortId040 = Binary order, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId041 = Dictionary order, case-sensitive, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId042 = Dictionary order, case-insensitive, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId043 = Dictionary order, case-insensitive, uppercase preference, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId044 = Dictionary order, case-insensitive, accent-insensitive, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId045 = Binary order based on code point comparison, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId049 = Strict compatibility with version 1.x case-insensitive databases, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId051 = Dictionary order, case-sensitive, for use with 1252 Character Set.
Property(S): SqlSortId052 = Dictionary order, case-insensitive, for use with 1252 Character Set.
Property(S): SqlSortId053 = Dictionary order, case-insensitive, uppercase preference, for use with 1252 Character Set.
Property(S): SqlSortId054 = Dictionary order, case-insensitive, accent-insensitive, for use with 1252 Character Set.
Property(S): SqlSortId055 = Alternate dictionary order, case-sensitive, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId056 = Alternate dictionary order, case-insensitive, uppercase preference, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId057 = Alternate dictionary order, case-insensitive, accent-insensitive, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId058 = Scandinavian dictionary order, case-insensitive, uppercase preference, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId059 = Scandinavian dictionary order, case-sensitive, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId060 = Scandinavian dictionary order, case-insensitive, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId061 = Alternate dictionary order, case-insensitive, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId081 = Dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId082 = Dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId083 = Czech dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId084 = Czech dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId085 = Hungarian dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId086 = Hungarian dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId087 = Polish dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId088 = Polish dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId089 = Romanian dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId090 = Romanian dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId091 = Croatian dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId092 = Croatian dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId093 = Slovak dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId094 = Slovak dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId095 = Slovenian dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId096 = Slovenian dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId105 = Dictionary order, case-sensitive, for use with the 1251 (Cyrillic) Character Set.
Property(S): SqlSortId106 = Dictionary order, case-insensitive, for use with the 1251 (Cyrillic) Character Set.
Property(S): SqlSortId107 = Ukrainian dictionary order, case-sensitive, for use with the 1251 (Cyrillic) Character Set.
Property(S): SqlSortId108 = Ukrainian dictionary order, case-insensitive, for use with the 1251 (Cyrillic) Character Set.
Property(S): SqlSortId113 = Dictionary order, case-sensitive, for use with the 1253 (Greek) Character Set.
Property(S): SqlSortId114 = Dictionary order, case-insensitive, for use with the 1253 (Greek) Character Set.
Property(S): SqlSortId120 = Mixed dictionary order, for use with the 1253 (Greek) Character Set.
Property(S): SqlSortId121 = Dictionary order, case-sensitive, accent-sensitive, for use with the 1253 (Greek) Character Set.
Property(S): SqlSortId122 = Dictionary order, case-sensitive, accent-sensitive, for use with the 1253 (Greek) Character Set.
Property(S): SqlSortId124 = Dictionary order, case-insensitive, accent-insensitive, for use with the 1253 (Greek) Character Set.
Property(S): SqlSortId129 = Dictionary order, case-sensitive, for use with the 1254 (Turkish) Character Set.
Property(S): SqlSortId130 = Dictionary order, case-insensitive, for use with the 1254 (Turkish) Character Set.
Property(S): SqlSortId137 = Dictionary order, case-sensitive, for use with the 1255 (Hebrew) Character Set.
Property(S): SqlSortId138 = Dictionary order, case-insensitive, for use with the 1255 (Hebrew) Character Set.
Property(S): SqlSortId145 = Dictionary order, case-sensitive, for use with the 1256 (Arabic) Character Set.
Property(S): SqlSortId146 = Dictionary order, case-insensitive, for use with the 1256 (Arabic) Character Set.
Property(S): SqlSortId153 = Dictionary order, case-sensitive, for use with the 1257 (Baltic) Character Set.
Property(S): SqlSortId154 = Dictionary order, case-insensitive, for use with the 1257 (Baltic) Character Set.
Property(S): SqlSortId155 = Estonian dictionary order, case-sensitive, for use with the 1257 (Baltic) Character Set.
Property(S): SqlSortId156 = Estonian dictionary order, case-insensitive, for use with the 1257 (Baltic) Character Set.
Property(S): SqlSortId157 = Latvian dictionary order, case-sensitive, for use with the 1257 (Baltic) Character Set.
Property(S): SqlSortId158 = Latvian dictionary order, case-insensitive, for use with the 1257 (Baltic) Character Set.
Property(S): SqlSortId159 = Lithuanian dictionary order, case-sensitive, for use with the 1257 (Baltic) Character Set.
Property(S): SqlSortId160 = Lithuanian dictionary order, case-insensitive, for use with the 1257 (Baltic) Character Set.
Property(S): SqlSortId183 = Danish/Norwegian dictionary order, case-insensitive, uppercase preference, for use with 1252 Character Set.
Property(S): SqlSortId184 = Swedish/Finnish (Phone) dictionary order, case-insensitive, uppercase preference, for use with 1252 Character Set.
Property(S): SqlSortId185 = Swedish/Finnish (Standard) dictionary order, case-insensitive, uppercase preference, for use with 1252 Character Set.
Property(S): SqlSortId186 = Icelandic dictionary order, case-insensitive, uppercase preference, for use with 1252 Character Set.
Property(S): StdSku = 1
Property(S): UpgradeCode = {929C9FEC-8873-4A1A-A209-9AF432E8E1D1}
Property(S): SqlPackageId = 1
Property(S): ProductName = Microsoft SQL Server 2005
Property(S): ProductNameSetup = Microsoft SQL Server 2005 Setup
Property(S): RemoveFeatureList = SQL_Engine,SQL_Data_Files,SQL_Replication,SQL_FullText,SQL_SharedTools,SQL_BC_DEP
Property(S): ROOTDRIVE = D:
Property(S): ValidMOFInstanceName = 1
Property(S): PIDRET = 0
Property(S): DPID = **********
Property(S): PID = **********
Property(S): PIDSEQ = 271000003
Property(S): PKU = 0
Property(S): CCPTrigger = 2
Property(S): SqlPerfMonRegKey = SQLCTR
Property(S): SqlSubDir = MSSQL
Property(S): InstanceSubDir = MSSQL.1
Property(S): Namechecksum.7354AFCB_913B_4E9F_B76C_2376101FDE0C = Standard Edition
Property(S): Namechecksum.CC1A8C58_27D1_4D38_BF1B_C0A5CBB90616 = Standard Edition
Property(S): QuotedServiceGroupAgent.EAD22282_F1AF_4119_B1F9_C9F1DCBC62FF = IECDC-WIAS169SQLServer2005SQLAgentUser$IECDC-WIAS169$MSSQLSERVER
Property(S): QuotedServiceGroupADHelper.2C8E638F_C982_4AA5_A173_7148A8E8649D = IECDC-WIAS169SQLServer2005MSSQLServerADHelperUser$IECDC-WIAS169
Property(S): QuotedServiceGroupSQLBrowser.879C8BDB_884A_4C3C_80C3_3452EA2B8439 = IECDC-WIAS169SQLServer2005SQLBrowserUser$IECDC-WIAS169
Property(S): QuotedServiceGroupSQLBrowser.03BE59F9_3DFA_413B_A99C_B95CA31A7BFE = IECDC-WIAS169SQLServer2005SQLBrowserUser$IECDC-WIAS169
Property(S): QuotedServiceGroupSQLBrowser.2FC2D269_8625_4826_BB3F_F9059090CB38 = IECDC-WIAS169SQLServer2005SQLBrowserUser$IECDC-WIAS169
Property(S): InstId = MSSQL.1
Property(S): PreviousInstId = MSSQL.1
Property(S): SqlLegacyRegPath = MSSQLServer
Property(S): SqlOriginalMachineName = IECDC-WIAS169
Property(S): RSSqlPoolLimit = 150
Property(S): RSGUIDVALUE = {97ba1f98-43fe-42dd-8a0d-ff40868ebe16}
Property(S): ProgramFilesFolder.D20239D7_E87C_40C9_9837_E70B8D4882C2 = C:Program Files
Property(S): ModuleID_SQLBASE = D20239D7_E87C_40C9_9837_E70B8D4882C2
Property(S): SQLAUTOSTART = 1
Property(S): InstanceName.D20239D7_E87C_40C9_9837_E70B8D4882C2 = MSSQLSERVER
Property(S): RSPREREQUISITECHECKED = 1
Property(S): SqlCOMPlusInstalled = 1
Property(S): SqlASPNETInstalled = 1
Property(S): ProgramMenuFolder.ConfigurationTools1033 = C:Documents and SettingsAll UsersStart MenuPrograms
Property(S): SqlDefaultWebSite = /W3SVC/1
Property(S): SqlIISInstalled = 1
Property(S): IISCHECKED = 1
Property(S): SCMLocalServiceAccount = NT AUTHORITYLocalService
Property(S): SCMNetworkServiceAccount = NT AUTHORITYNetworkService
Property(S): PerformanceLogUsersGroup = BUILTINPerformance Log Users
Property(S): PerformanceMontiorUsersGroup = BUILTINPerformance Monitor Users
Property(S): DW20PATH_CPUTYPEX86 = X86
Property(S): QuotedComputerName = IECDC-WIAS169
Property(S): QuotedDefaultDomain = VF-IE
Property(S): DW20PATH_X86.8D56D6B0_25DE_4471_A64F_717FC5AB6330 = C:PROGRA~1COMMON~1MICROS~1DWDW20.EXE
Property(S): DefaultDomain = VF-IE
Property(S): WindowsFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E = C:WINDOWS
Property(S): SystemFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32
Property(S): WindowsFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E = C:WINDOWS
Property(S): SystemFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32
Property(S): WindowsFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E = C:WINDOWS
Property(S): SystemFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32
Property(S): WindowsFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E = C:WINDOWS
Property(S): SystemFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32
Property(S): WindowsFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E = C:WINDOWS
Property(S): SystemFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32
Property(S): WindowsFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E = C:WINDOWS
Property(S): SystemFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32
Property(S): WindowsFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E = C:WINDOWS
Property(S): SystemFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32
Property(S): WindowsFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E = C:WINDOWS
Property(S): SystemFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32
Property(S): ACTION = INSTALL
Property(S): Preselected = 1
Property(S): UILevel = 2
Property(S): ServicePrefixRS.6080319C_1466_426E_9E7A_1DD555143E0A = SQLServer2005ReportServerUser$IECDC-WIAS169$
Property(S): ServicePrefixSSIS.6080319C_1466_426E_9E7A_1DD555143E0A = SQLServer2005DTSUser$IECDC-WIAS169
Property(S): OriginalDatabase = D:MSMSQLServer2005ServersSetupSqlRun_SQL.msi
Property(S): DATABASE = C:WINDOWSInstallerd5f48.msi
Property(S): Privileged = 1
Property(S): RedirectedDllSupport = 2
Property(S): MsiWin32AssemblySupport = 5.2.3790.1830
Property(S): MsiNetAssemblySupport = 2.0.50727.42
Property(S): Date = 22/02/2007
Property(S): Time = 15:34:23
Property(S): TTCSupport = 1
Property(S): ColorBits = 32
Property(S): TextHeight = 16
Property(S): BorderSide = 1
Property(S): BorderTop = 1
Property(S): CaptionHeight = 19
Property(S): ScreenY = 768
Property(S): ScreenX = 1024
Property(S): SystemLanguageID = 6153
Property(S): ComputerName = IECDC-WIAS169
Property(S): UserLanguageID = 6153
Property(S): UserSID = S-1-5-21-1275210071-484763869-725345543-115600
Property(S): LogonUser = manncol_srvadm
Property(S): AdminUser = 1
Property(S): VirtualMemory = 7379
Property(S): PhysicalMemory = 3928
Property(S): SystemFolder.60A85CA1_D9D8_43FA_9DD5_574BEF970F9F = C:WINDOWSsystem32
Property(S): Intel = 15
Property(S): ShellAdvtSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): GPTSupport = 1
Property(S): FontsFolder = C:WINDOWSFonts
Property(S): ModuleID_SQLBRWS = 2FC2D269_8625_4826_B

View 5 Replies View Related

SQL Server Database Services (SQLExpress): Setup Failed. 1708 And 1603

Sep 19, 2006

I am trying to install SQL Express, but are getting a failure. The SQLSetUp_xxxx_SQL.log contains the following information? Who can help?



Property(S): CommonFilesFolder.D9BC9C10_2DCD_44D3_AACC_9C58CAF76128 = C:Program FilesCommon Files
MSI (s) (CC:34) [22:03:07:796]: Note: 1: 1708
MSI (s) (CC:34) [22:03:07:796]: Product: Microsoft SQL Server 2005 Express Edition -- Installation failed.

MSI (s) (CC:34) [22:03:07:812]: Cleaning up uninstalled install packages, if any exist
MSI (s) (CC:34) [22:03:07:828]: MainEngineThread is returning 1603
MSI (s) (CC:DC) [22:03:07:937]: Destroying RemoteAPI object.
MSI (s) (CC:FC) [22:03:07:937]: Custom Action Manager thread ending.
=== Logging stopped: 19/09/2006 22:03:07 ===
MSI (c) (24:40) [22:03:07:937]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (24:40) [22:03:07:937]: MainEngineThread is returning 1603

View 7 Replies View Related

SQL Server Developer Fails To Install (Database Engine Only)... Error 1603 &&amp; 1708

May 16, 2007

Please Help!!!.



I Installed everything but database Engine...



Error Log:



Property(S): SqlVerComBin.8E491190_3328_49D2_9FFE_2D036D847DE2 = C:Program FilesMicrosoft SQL Server90COM
Property(S): Ver.8E491190_3328_49D2_9FFE_2D036D847DE2 = C:Program FilesMicrosoft SQL Server90
Property(S): SqlVerComBin.EB8FB35E_3FC3_41F6_9721_7400C2070A66 = C:Program FilesMicrosoft SQL Server90COM
Property(S): Ver.EB8FB35E_3FC3_41F6_9721_7400C2070A66 = C:Program FilesMicrosoft SQL Server90
Property(S): SqlTarget.EB8FB35E_3FC3_41F6_9721_7400C2070A66 = C:Program FilesMicrosoft SQL Server
Property(S): SqlInstance.EB8FB35E_3FC3_41F6_9721_7400C2070A66 = C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQL
Property(S): SqlInstanceBin.EB8FB35E_3FC3_41F6_9721_7400C2070A66 = C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQLBinn
Property(S): sqlreps_dll.EB8FB35E_3FC3_41F6_9721_7400C2070A66 = C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQLBinnsqlrepss90.dll
Property(S): SqlInstance.E4D6F7B0_3639_4517_9BA2_30823DE19CEB = C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQL
Property(S): SqlTarget.E4D6F7B0_3639_4517_9BA2_30823DE19CEB = C:Program FilesMicrosoft SQL Server
Property(S): SqlInstanceInstall.E4D6F7B0_3639_4517_9BA2_30823DE19CEB = C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQLInstall
Property(S): CommonFilesFolder.D9BC9C10_2DCD_44D3_AACC_9C58CAF76128 = C:Program FilesCommon Files
Property(S): MSShared.D9BC9C10_2DCD_44D3_AACC_9C58CAF76128 = C:Program FilesCommon FilesMicrosoft Shared
Property(S): DatabaseRepl.D9BC9C10_2DCD_44D3_AACC_9C58CAF76128 = C:Program FilesCommon FilesMicrosoft SharedDatabase Replication
Property(S): DatabaseReplRes.D9BC9C10_2DCD_44D3_AACC_9C58CAF76128 = C:Program FilesCommon FilesMicrosoft SharedDatabase ReplicationResources
Property(S): DatabaseReplRes1033.D9BC9C10_2DCD_44D3_AACC_9C58CAF76128 = C:Program FilesCommon FilesMicrosoft SharedDatabase ReplicationResources1033
Property(S): WindowsFolder = C:WINNT
Property(S): Gac.A6DEDA64_4924_4EA9_84E5_DC507BA0794B = C:Program FilesMicrosoft SQL Server90GAC
Property(S): Ver.A6DEDA64_4924_4EA9_84E5_DC507BA0794B = C:Program FilesMicrosoft SQL Server90
Property(S): Gac.4845A713_8D8A_4100_8CAA_164C5AC9E452 = C:Program FilesMicrosoft SQL Server90GAC
Property(S): Ver.4845A713_8D8A_4100_8CAA_164C5AC9E452 = C:Program FilesMicrosoft SQL Server90
Property(S): SqlVerComBin.8B75390F_DF2F_4C2C_92F5_9B83F3B36340 = C:Program FilesMicrosoft SQL Server90COM
Property(S): Ver.8B75390F_DF2F_4C2C_92F5_9B83F3B36340 = C:Program FilesMicrosoft SQL Server90
Property(S): SqlVerComBin.889BED4C_E3F4_4943_956C_6FFD882F721F = C:Program FilesMicrosoft SQL Server90COM
Property(S): Ver.889BED4C_E3F4_4943_956C_6FFD882F721F = C:Program FilesMicrosoft SQL Server90
Property(S): SqlVerComBin.CC4DBEA7_CD8B_4AAE_A10F_657CBA390BD6 = C:Program FilesMicrosoft SQL Server90COM
Property(S): Ver.CC4DBEA7_CD8B_4AAE_A10F_657CBA390BD6 = C:Program FilesMicrosoft SQL Server90
Property(S): SqlVerComBinRes.CC4DBEA7_CD8B_4AAE_A10F_657CBA390BD6 = C:Program FilesMicrosoft SQL Server90COMResources
Property(S): SqlVerComBinRes1033.CC4DBEA7_CD8B_4AAE_A10F_657CBA390BD6 = C:Program FilesMicrosoft SQL Server90COMResources1033
Property(S): SqlInstance.7827AB3E_7041_406A_9591_4DB66042927F = C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQL
Property(S): SqlTarget.7827AB3E_7041_406A_9591_4DB66042927F = C:Program FilesMicrosoft SQL Server
Property(S): SqlInstanceBin.7827AB3E_7041_406A_9591_4DB66042927F = C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQLBinn
Property(S): Data.7827AB3E_7041_406A_9591_4DB66042927F = C:Program FilesMicrosoft SQL Server
Property(S): DataInstance.7827AB3E_7041_406A_9591_4DB66042927F = C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQL
Property(S): FTDataDir.7827AB3E_7041_406A_9591_4DB66042927F = C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQLFTData
Property(S): DataInstanceTxt.7827AB3E_7041_406A_9591_4DB66042927F = C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQL
Property(S): DataInstanceFTData.7827AB3E_7041_406A_9591_4DB66042927F = C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQLFTData
Property(S): ModuleID_FTSSV = 68C6D15C_77E0_11D5_8528_00C04F68155C
Property(S): SqlFullTextDefaultPath = C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQLFTData
Property(S): FTERefPath.68C6D15C_77E0_11D5_8528_00C04F68155C = C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQLFTData
Property(S): QuotedServiceGroupFTS.CC1A8C58_27D1_4D38_BF1B_C0A5CBB90616 = B0019B91BCDB3SQLServer2005MSFTEUser$B0019B91BCDB3$SQL2005PDI1
Property(S): FTEInstName.68C6D15C_77E0_11D5_8528_00C04F68155C = SQL2005PDI1
Property(S): FTERudeInstName.68C6D15C_77E0_11D5_8528_00C04F68155C = MSSQL.3
Property(S): FTERegRoot.68C6D15C_77E0_11D5_8528_00C04F68155C = SOFTWAREMicrosoftMicrosoft SQL ServerMSSQL.3MSSearch
Property(S): FTEInstanceSubDir.68C6D15C_77E0_11D5_8528_00C04F68155C = MSSQL.3MSSQL
Property(S): FTEStartupType = 0
Property(S): FTEStatus = 3
Property(S): InstanceRegKey.7827AB3E_7041_406A_9591_4DB66042927F = Microsoft SQL ServerMSSQL.3
Property(S): InstanceName.7827AB3E_7041_406A_9591_4DB66042927F = SQL2005PDI1
Property(S): SqlVerComFT.BB43EC2E_1D73_400F_AE2F_F370407BC222 = C:Program FilesMicrosoft SQL Server90COM
Property(S): Ver.BB43EC2E_1D73_400F_AE2F_F370407BC222 = C:Program FilesMicrosoft SQL Server90
Property(S): FTESqlInstanceBin.68C6D15C_77E0_11D5_8528_00C04F68155C = C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQLBinn
Property(S): FTESqlInstance.68C6D15C_77E0_11D5_8528_00C04F68155C = C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQL
Property(S): FTESqlInstanceBinRef.68C6D15C_77E0_11D5_8528_00C04F68155C = C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQLBinnFTERef
Property(S): FTESqlInstanceDotNumber.68C6D15C_77E0_11D5_8528_00C04F68155C = C:Program FilesMicrosoft SQL ServerMSSQL.1
Property(S): SqlVer.68C6D15C_77E0_11D5_8528_00C04F68155C = C:Program FilesMicrosoft SQL Server90
Property(S): FTESharedCompRoot.68C6D15C_77E0_11D5_8528_00C04F68155C = C:Program FilesMicrosoft SQL Server90
Property(S): Sql.68C6D15C_77E0_11D5_8528_00C04F68155C = C:Program FilesMicrosoft SQL Server
Property(S): SqlTarget.68C6D15C_77E0_11D5_8528_00C04F68155C = C:Program FilesMicrosoft SQL Server
Property(S): ProgramFilesFolder.68C6D15C_77E0_11D5_8528_00C04F68155C = C:Program Files
Property(S): CAFTERemovePerfCounters.68C6D15C_77E0_11D5_8528_00C04F68155C = $SQL2005PDI1
Property(S): CAFTEUninstallFTERef.68C6D15C_77E0_11D5_8528_00C04F68155C = C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQLBinnFTERef|C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQLFTData
Property(S): CAFTEUpgradeFTERefFiles.68C6D15C_77E0_11D5_8528_00C04F68155C = SQLServer$SQL2005PDI1:C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQLBinnFTERef
Property(S): CAFTEUpgradeFTERefFilesRollBack.68C6D15C_77E0_11D5_8528_00C04F68155C = C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQLBinnFTERef
Property(S): CAFTEInstallFTERef.68C6D15C_77E0_11D5_8528_00C04F68155C = C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQLBinnFTERef|C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQLFTData
Property(S): CAFTEAddCertificate.68C6D15C_77E0_11D5_8528_00C04F68155C = C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQLBinn
Property(S): CAFTEInstallPerfCounters.68C6D15C_77E0_11D5_8528_00C04F68155C = C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQLBinnSQL2005PDI1
Property(S): CASetLaunchPermissions.68C6D15C_77E0_11D5_8528_00C04F68155C = {68C6D318-77E0-11D5-8528-00C04F68155C}:NT AUTHORITYSYSTEM
Property(S): FTERegInstName.68C6D15C_77E0_11D5_8528_00C04F68155C = SQL2005PDI1
Property(S): FTERegRudeInstName.68C6D15C_77E0_11D5_8528_00C04F68155C = MSSQL.3
Property(S): FTEUPGRADE.68C6D15C_77E0_11D5_8528_00C04F68155C = 0
Property(S): FTEUpgrade30.68C6D15C_77E0_11D5_8528_00C04F68155C = 0
Property(S): FTEUpgradeMSSearchApp.68C6D15C_77E0_11D5_8528_00C04F68155C = SQLServer$SQL2005PDI1
Property(S): FTEUpgradeMSSearchStandalone.68C6D15C_77E0_11D5_8528_00C04F68155C = 0
Property(S): CostingComplete = 1
Property(S): FTEInstID.68C6D15C_77E0_11D5_8528_00C04F68155C = 1
Property(S): FTEAppID.68C6D15C_77E0_11D5_8528_00C04F68155C = {68C6D318-77E0-11D5-8528-00C04F68155C}
Property(S): FTEAdminCLSID.68C6D15C_77E0_11D5_8528_00C04F68155C = {68C6D37C-77E0-11D5-8528-00C04F68155C}
Property(S): FTEIFTEAdmin.68C6D15C_77E0_11D5_8528_00C04F68155C = {64f6bd6f-cc0d-11d6-9a15-505054503030}
Property(S): FTEMSFTEPXY.68C6D15C_77E0_11D5_8528_00C04F68155C = {64f6bdd4-cc0d-11d6-9a15-505054503030}
Property(S): FTEDollarInstName.68C6D15C_77E0_11D5_8528_00C04F68155C = $SQL2005PDI1
Property(S): FTEServiceName.68C6D15C_77E0_11D5_8528_00C04F68155C = msftesql$SQL2005PDI1
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 0
Property(S): PrimaryVolumeSpaceRequired = 0
Property(S): PrimaryVolumeSpaceRemaining = 0
Property(S): RSVirtualDirectoryServer = ReportServer$SQL2005PDI1
Property(S): SqlStateManaged = 2
Property(S): SqlActionManaged = 3
Property(S): SqlNamedInstance = 1
Property(S): RSVirtualDirectoryManager = Reports$SQL2005PDI1
Property(S): SOURCEDIR = S:PDIPDI ToolsSQL 2005 DeveloperCD1Setup
Property(S): SourcedirProduct = {2373A92B-1C1C-4E71-B494-5CA97F96AA19}
Property(S): InstallNgenTicks = 20000
Property(S): DebugClsid.CC1A8C58_27D1_4D38_BF1B_C0A5CBB90616 = {BF3C1964-6601-4DBB-A782-1848FD4A2109}
Property(S): SQLBROWSERACCOUNT = CORPNBDG3C3
Property(S): ProductToBeRegistered = 1
MSI (s) (F8:64) [14:22:43:217]: Note: 1: 1708
MSI (s) (F8:64) [14:22:43:217]: Product: Microsoft SQL Server 2005 -- Installation failed.

MSI (s) (F8:64) [14:22:43:233]: Cleaning up uninstalled install packages, if any exist
MSI (s) (F8:64) [14:22:43:233]: MainEngineThread is returning 1603
MSI (s) (F8:48) [14:22:43:342]: Destroying RemoteAPI object.
MSI (s) (F8:C0) [14:22:43:342]: Custom Action Manager thread ending.
=== Logging stopped: 5/16/2007 14:22:43 ===
MSI (c) (7C:84) [14:22:43:342]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (7C:84) [14:22:43:342]: MainEngineThread is returning 1603
=== Verbose logging stopped: 5/16/2007 14:22:43 ===

View 4 Replies View Related

Can't Find Or Load Message DLL. Message DLL Must Be In Path Or In Current Directory.

Jul 23, 2007

In my SQL Server, I see the below message in the Application Event Viewer



"18265 :

Log backed up: Database: HSD, creation date(time): 2007/01/06(05:05:05), first LSN: 1439:495055:1, last LSN: 1439:496675:1, number of dump devices: 1, device information: (FILE=1, TYPE=DISK: {'D:MSSQLBACKUPHSDHSD_tlog_200707141300.TRN'})."



When I save the application event viewer and open it in another server, I do not see the above message, instead I get the following message:

" Can't find or load message DLL. Message DLL must be in path or in current directory."



Any thoughts to overcome this problem is appreciated.



Thanks

Santhosh


View 3 Replies View Related

This Message Could Not Be Delivered Because Its Message Timestamp Has Expired Or Is Invalid

Aug 8, 2007

I run SB between 2 SQL servers. In profiler on an initiator side I see next error: 'This message could not be delivered because its message timestamp has expired or is invalid'. For the conversation we use best practice, i.e. target closes a conversation. Target side succeed to close conversation, but initiator still stay in DO (disconnect_outbound).
What is a reasone for the error? What to do?

View 5 Replies View Related

This Message Could Not Be Delivered Because Its Message Timestamp Has Expired Or Is Invalid.

Aug 8, 2007

I see in profiler this error: "This message could not be delivered because its message timestamp has expired or is invalid"
What is a reason for error?

View 1 Replies View Related

Message Type And Message Body..............

Nov 17, 2006

Hello,

I am having trouble specifying a message body that is valid. I mean for the client to send. If I leave it as null then everything is ok but if I create a memorystream and add a line of text it reports back it did not pass validation. I do not understand this and am not sure what to do. I need to send a message based on a code and text but do not know the format of the body that is allowed. The code I am refering to comes out of HelloWord_CLR because that is what I am formating my sample after. I call it the same way it calls the return message done in ServiceProc. I need to know the message format including body since this does not seem to work. A sample of the call is bellow.

// Create an empty request message

string Msg = "Hello";

MemoryStream body = new MemoryStream(Encoding.ASCII.GetBytes(Msg));

Message request = new Message("Request", body);

Thanks,

Scott Allison...

View 1 Replies View Related

Sqlserver 7 Warning

Jul 17, 2001

Whats the cause for this warning, after I query a sqlserver 7 table,
'warning: Null value eliminated from aggregate' ?

Thanks,
Scott

View 1 Replies View Related

W32time Warning

Nov 12, 2002

I keep getting this warning, any ideas on how to fix this? Thank you.

View 1 Replies View Related

Warning By Sqlserveragent

Aug 17, 2004

Hello,

I am getting the following warning message in the event viewer. I have only one schedule in sql. there is no other schedules in task scheduler or database management.

Event Type:Warning
Event Source:SQLSERVERAGENT
Event Category:Job Engine
Event ID:208
Description:
SQL Server Scheduled Job 'Transaction Log Backup Job for DB Maintenance Plan 'DB Maintenance Plan1'' (0xD25A4CDDD1C59E48B4D28F61F0A411B8) - Status: Failed - Invoked on: 2004-08-16 02:30:00 - Message: The job failed. The Job was invoked by Schedule 2 (Schedule 1). The last step to run was step 1 (Step 1).

Kindly give the suggestions at earliest.

View 1 Replies View Related

Warning...newbie Here!

Jan 26, 2004

Hey guys....I have a quick question. I am having a problem with a certain app which connects to my SQL 2000 SP3a Database. It only occurs when I have a ^ in the password, both using SQL and NT authentication.

I have checked on MSDN and they do not list that character as one to avoid. I did find in the books online documentation that the ^ performs a bitwise exclusive OR operation....has anyone tested using ^ as part of a password to authenticate to a SQL db?

View 1 Replies View Related

Warning Sign: What Does It Mean???

Jan 6, 2006

I typed the following query

ALTER TABLE [konnik].[PORTAL_CONFIG]
ADD CONSTRAINT [DF_PORTAL_CONFIG_AUTOPM_ON]
DEFAULT (1) FOR [AUTOPM_ON]

and i received the following warning

Warning: The table 'PORTAL_CONFIG' has been created but its maximum row size (12068) exceeds the maximum number of bytes per row (8060). INSERT or UPDATE of a row in this table will fail if the resulting row length exceeds 8060 bytes.

Bear in mind that this table come from Access through the Dts. Could anyone translate this for me? How can i overcome this???

View 10 Replies View Related

Warning Error

May 7, 2007

hi all..

i have this error and fail to resolve it :-
Warning: Null value is eliminated by an aggregate or other SET operation.
what does that means? my code :-

SELECT
@BookQtyIN = ISNULL(SUM(x.pickqty), 0),
@PickQtyIN = CASE WHEN ISNULL(SUM(x.pickqty), 0) >0 THEN
ISNULL(SUM(d.PickQty), 0) - ISNULL(SUM(x.pickqty), 0)
ELSE ISNULL(SUM(d.PickQty), 0)END,

FROMtblItemDetail d

LEFT JOIN (SELECT p.PickQty AS PickQty,
j.PickComplete AS PickComplete,
p.ItemStorageID AS ItemStorageID
FROM tblItempicked p
LEFT JOIn tblJobDocuments j
ON j.Docrefid=p.Docrefid AND j.JobID=p.JobID
WHERE j.PickComplete='N'
)AS x ON x.ItemStorageID=d.ItemStorageID

WHERE d.ItemID = @ItemID
AND d.Ownership = @ClientID
AND d.CustomLotNo = @CustomLotNo

View 2 Replies View Related

Should This Be An Error Rather Than A Warning?

May 25, 2006

If you have a package that uses an environment variable for an indirect configuration and the environment variable is not present when the package runs you get the following warning:

The configuration environment variable was not found.  The environment variable was: "Seer.ConnectionManager.CUECommonReference". This occurs when a package specifies an environment variable for a configuration setting but it cannot be found. Check the configurations collection in the package and verify that the specified environment variable is available and valid. 

IMO, if the package is expecting to find something and cannot find it then it should cause an error, not a warning. I'm happy for people to disagree tho :)

Any comments???

 

-Jamie

 

View 17 Replies View Related

Installation Warning Help!....

Jan 17, 2008



Install on 2003 Server R2 x64 I get this warning and need to now how to fix this:


- ASP.Net Version Registration Requirement (Warning)



Messages

ASP.Net Version Registration Requirement



64-bit ASP.Net is Registered. Required 32-bit ASP.Net to install Microsoft Reporting Services 2005(32-bit).

Can the 32-bit version co-exist with the 64-bit version APS.Net?

View 3 Replies View Related

Truncation Warning

May 24, 2007

Hello,



I'm having a problem with one of my packages due to a truncation warning that I can't get rid of. It's not the end of the world, because the package still works. It's just extremely frustrating.



The problem arises in a derived column item in a data flow task. There is a postcode field in the data flow which has space for 20 characters. I create a derived column from this which simply removes any spaces:



Derived Column Name: Postcode

Derived Column: Replace 'Postcode'

Expression: REPLACE(" ",Postcode,"")

Data Type: string [DT_STR]

Length: 20

Code Page: 1252 (ANSI - Latin I)



However when I use this expression, or anything else which uses the replace function, I end up with the warning message:



Warning 1 Validation warning. Create Staging Tables: Derived Column [20555]: The result string for expression "REPLACE(" ",Postcode,"")" may be truncated if it exceeds the maximum length of 4000 characters. The expression could have a result value that exceeds the maximum size of a DT_WSTR.



I have tried everything I can think of to get rid of the warning. Is there some way I can use the replace function, but not have the system convinced that I'm about to go over the maximum size limit?



Many thanks

View 5 Replies View Related

WARNING:LRU List Is Empty

Feb 14, 1999

Can some one please help.
Lately I am getting an error:
LAZY WRITER WARNING: LRU List is Empty

Than the system locks!
can anyone help. This is driving us crazy.
There is no reference in the KB. We are trying to insert records into a table by a SP.

Thanks,
John

View 2 Replies View Related

Task Engine Warning

May 20, 1999

I'm running SQL Server 6.5, with the latest Service pack on NT 4.0 with SP4. A couple of days ago I started getting a warning message in my event log right after a scheduled task ran. The scheduled task calls three stored procedures (data dumps for master, msdb, and a production database) it also runs a consistency check on each before dumping them. I can interactively run each stored procedure and get NO error messages. Prior to getting the warning message (which occurs after the scheduled task runs) I get normal informational entries that the dumps occurred without a problem and the files are written to the proper area. The error is in the Task Engine category and are Warning type messages. Here is the text:

SQL Server Scheduled Task: 27, 'Proddata Dump' -- Status: Failed
-- Task Invoked on: 5/20/99 5:00:00 AM -- Message: Database 'ASSMTCTRPROD' (116647 pages) dumped to file <1> on device 'D:DATDUMPASSMTCTRPROD_990520_DATA.DMP'. (Message 4035)

Any help that anyone could give would be greatly appreciated. Thanks

View 1 Replies View Related

SQL Server Agent Warning

Jul 23, 2002

Hi

I'm getting a strange sql server agent warning in my server's event log (not in the sql server log). Its occurring after each agent job runs and says:

"Unable to determine if the owner (sa) of job Trans Backup has server access (reason: Unable to connect to server - check SQL Server and SQL Agent errorlogs)."

I have checked the errorlogs - nothing.
My job completes OK, but I get this warning.

I'm running SQL Server 2000 SP2.
I'm running in a cluster.
The problem has only occurred since a reboot yesterday.

Any Ideas?

Thanks in advance.

Andy

View 2 Replies View Related

Database Recovery Warning

Feb 8, 2008

Hi All,

I've recently restored one of my development databases from it's production backup. The restore completed successfully, users were able to connect to the database without any problems. However, when I checked the error log I found the following message:

Bypassing recovery for database 'Test' because it is marked IN LOAD.

I could not find anything on the web or in BOL. Any ideas?

Thanks.

View 3 Replies View Related

Warning Msg In Application Log Urgent

Feb 10, 2004

Hi all,
Sql server 7.

Under event viewer->application log i am getting the below error continously. Pls help

Regards,Event Type: Warning
Event Source: SQLServerAgent$abc
Event Category: Printers
Event ID: 208
Date: 2/9/2004
Time: 9:23:03 PM
User: N/A
Computer: abc1
Description:
The description for Event ID ( 208 ) in Source ( SQLServerAgent$abc ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: SQL Check, 0xAF04DFE7917DEA489F33D8A38E8A0793, Failed, 2/9/2004 9:23:00 PM, The job failed. The Job was invoked by Schedule 31 (6.x schedule). The last step to run was step 1 (Step 1)..


Waiting for ur reply
TIA
aadil

View 3 Replies View Related

IIS Feature Requirement (Warning

Sep 18, 2007

Hello there

I installed sql server 2005 developer edition

and the only error message i got was.

- IIS Feature Requirement (Warning)
Messages
IIS Feature Requirement

Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online.

how do i get hold of Internet Information Services
I installed it on vista premium.

Please help

Regards
ROB

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved