Warning Msg In Application Log Urgent
Feb 10, 2004
Hi all,
Sql server 7.
Under event viewer->application log i am getting the below error continously. Pls help
Regards,Event Type: Warning
Event Source: SQLServerAgent$abc
Event Category: Printers
Event ID: 208
Date: 2/9/2004
Time: 9:23:03 PM
User: N/A
Computer: abc1
Description:
The description for Event ID ( 208 ) in Source ( SQLServerAgent$abc ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: SQL Check, 0xAF04DFE7917DEA489F33D8A38E8A0793, Failed, 2/9/2004 9:23:00 PM, The job failed. The Job was invoked by Schedule 31 (6.x schedule). The last step to run was step 1 (Step 1)..
Waiting for ur reply
TIA
aadil
View 3 Replies
ADVERTISEMENT
May 15, 2007
Hello, over night I got problems with Visual Studio (Business Intelligence Platform) accessing the SQL Server. I think i automaticly received a patch that caused that problem. I had no problem deploying projects or accessing reports from Report Manager. As soon as I wanted to access the database from VS (through data or preview) the application hang up. I checked the database and everything is allright. I googled and a guy who expericenced a simular problem was recommended to uninstall and install SQL Server. At last I did the same but now I am even experiencing problem with installation.The installation stops when configuring components i. e. Visual Studio IDE and then nothing happens.
The logg says the following: C:WINDOWSMicrosoft.NETFrameworkv2.0.50727gen.exe install "Microsoft.VisualStudio.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /NoDependencies /queue:3 /execonfig:"C:Program FilesMicrosoft Visual Studio 8Common7IDEdevenv.exe" /nologo
05/15/07 07:32:14 DDSet_Status: LANGID: 1033 .
I cannot abort the installation process.
I am very thankful for your help!
/luskan
View 1 Replies
View Related
Oct 31, 2006
We have a small accounting application which is currently based using DBASE database. We need to change the DB and considering SQL Express. However, is some one can clarify following, it would be very helpful:
1) Application is used mostly by standalone non-technical users. There are cases where more than one user will need to connect to DB.
2) We need to ensure that user can not modify database outside of our application. This is needed to ensure database does not get currpted or passwords lost and then no one can open the database.
3) Installation needs to be simple without providing any options to users except where to install database or point to already installed DB in case its a network environment where 2-3 users can be working on the same database.
4) Application is usually installed on normal desktop machines. So, DB should not load the PC heavily.
Please advice if SQL Express is the right direction even with these constraints? What are the other alternatives? We are open to have a small consulting project as well with someone who can guide us through these issues. Email to contact is rkabra101@yahoo.com
rick
View 1 Replies
View Related
Apr 24, 2008
i am new for SQL server report service, i have a project that need to generate report and integrate or shown on my window application,
so i have a few questions as follows:
1) do i need to add web reference ( report ) to my window application?.
2) how can i preview and print .rdl report within my window application?
3) how to automatically printer report? can this be done by within a store procedure or trigger or in window application?
ps: view reprot manager, ---- http://localhost/reportserver$SQLEXPRESS
ask me name & password? what name should i type in sa? or Administrator or ?
many thanks,
C
View 4 Replies
View Related
Apr 13, 2008
have SQL Server 2005 std edition SP1 installed on Windows 2003 Std edition .Configured Transactional (single Publisher and no clustered environment.)
Replication past two months working fine, Now
1.Distrib.exe application err is coming.
Due to which my job is failing (Distributor to Subscriber).
Iam attaching thw file.
Thanks
Sandeep
View 1 Replies
View Related
Sep 27, 2000
This morning I can not connect to our SQL Server 7.0 whatever from client or server. The error message which I list below:
++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++
A connection could not be estabished to server--Timeout expired
Please verfy SQL Server is running and check your SQL Server registration properties and try again.
++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++
We use windows NT authentication. We did not do any change on NT. The SQL Server daily schedule job usally stoped at 10:00AM, but today from the Window NT Task Manager, we can see that the SQL Server is still running untill now.
Please help!!!
View 3 Replies
View Related
Jul 17, 2001
Whats the cause for this warning, after I query a sqlserver 7 table,
'warning: Null value eliminated from aggregate' ?
Thanks,
Scott
View 1 Replies
View Related
Nov 12, 2002
I keep getting this warning, any ideas on how to fix this? Thank you.
View 1 Replies
View Related
Aug 17, 2004
Hello,
I am getting the following warning message in the event viewer. I have only one schedule in sql. there is no other schedules in task scheduler or database management.
Event Type:Warning
Event Source:SQLSERVERAGENT
Event Category:Job Engine
Event ID:208
Description:
SQL Server Scheduled Job 'Transaction Log Backup Job for DB Maintenance Plan 'DB Maintenance Plan1'' (0xD25A4CDDD1C59E48B4D28F61F0A411B8) - Status: Failed - Invoked on: 2004-08-16 02:30:00 - Message: The job failed. The Job was invoked by Schedule 2 (Schedule 1). The last step to run was step 1 (Step 1).
Kindly give the suggestions at earliest.
View 1 Replies
View Related
Jan 26, 2004
Hey guys....I have a quick question. I am having a problem with a certain app which connects to my SQL 2000 SP3a Database. It only occurs when I have a ^ in the password, both using SQL and NT authentication.
I have checked on MSDN and they do not list that character as one to avoid. I did find in the books online documentation that the ^ performs a bitwise exclusive OR operation....has anyone tested using ^ as part of a password to authenticate to a SQL db?
View 1 Replies
View Related
Jan 6, 2006
I typed the following query
ALTER TABLE [konnik].[PORTAL_CONFIG]
ADD CONSTRAINT [DF_PORTAL_CONFIG_AUTOPM_ON]
DEFAULT (1) FOR [AUTOPM_ON]
and i received the following warning
Warning: The table 'PORTAL_CONFIG' has been created but its maximum row size (12068) exceeds the maximum number of bytes per row (8060). INSERT or UPDATE of a row in this table will fail if the resulting row length exceeds 8060 bytes.
Bear in mind that this table come from Access through the Dts. Could anyone translate this for me? How can i overcome this???
View 10 Replies
View Related
May 7, 2007
hi all..
i have this error and fail to resolve it :-
Warning: Null value is eliminated by an aggregate or other SET operation.
what does that means? my code :-
SELECT
@BookQtyIN = ISNULL(SUM(x.pickqty), 0),
@PickQtyIN = CASE WHEN ISNULL(SUM(x.pickqty), 0) >0 THEN
ISNULL(SUM(d.PickQty), 0) - ISNULL(SUM(x.pickqty), 0)
ELSE ISNULL(SUM(d.PickQty), 0)END,
FROMtblItemDetail d
LEFT JOIN (SELECT p.PickQty AS PickQty,
j.PickComplete AS PickComplete,
p.ItemStorageID AS ItemStorageID
FROM tblItempicked p
LEFT JOIn tblJobDocuments j
ON j.Docrefid=p.Docrefid AND j.JobID=p.JobID
WHERE j.PickComplete='N'
)AS x ON x.ItemStorageID=d.ItemStorageID
WHERE d.ItemID = @ItemID
AND d.Ownership = @ClientID
AND d.CustomLotNo = @CustomLotNo
View 2 Replies
View Related
May 25, 2006
If you have a package that uses an environment variable for an indirect configuration and the environment variable is not present when the package runs you get the following warning:
The configuration environment variable was not found. The environment variable was: "Seer.ConnectionManager.CUECommonReference". This occurs when a package specifies an environment variable for a configuration setting but it cannot be found. Check the configurations collection in the package and verify that the specified environment variable is available and valid.
IMO, if the package is expecting to find something and cannot find it then it should cause an error, not a warning. I'm happy for people to disagree tho :)
Any comments???
-Jamie
View 17 Replies
View Related
Jan 17, 2008
Install on 2003 Server R2 x64 I get this warning and need to now how to fix this:
- ASP.Net Version Registration Requirement (Warning)
Messages
ASP.Net Version Registration Requirement
64-bit ASP.Net is Registered. Required 32-bit ASP.Net to install Microsoft Reporting Services 2005(32-bit).
Can the 32-bit version co-exist with the 64-bit version APS.Net?
View 3 Replies
View Related
May 24, 2007
Hello,
I'm having a problem with one of my packages due to a truncation warning that I can't get rid of. It's not the end of the world, because the package still works. It's just extremely frustrating.
The problem arises in a derived column item in a data flow task. There is a postcode field in the data flow which has space for 20 characters. I create a derived column from this which simply removes any spaces:
Derived Column Name: Postcode
Derived Column: Replace 'Postcode'
Expression: REPLACE(" ",Postcode,"")
Data Type: string [DT_STR]
Length: 20
Code Page: 1252 (ANSI - Latin I)
However when I use this expression, or anything else which uses the replace function, I end up with the warning message:
Warning 1 Validation warning. Create Staging Tables: Derived Column [20555]: The result string for expression "REPLACE(" ",Postcode,"")" may be truncated if it exceeds the maximum length of 4000 characters. The expression could have a result value that exceeds the maximum size of a DT_WSTR.
I have tried everything I can think of to get rid of the warning. Is there some way I can use the replace function, but not have the system convinced that I'm about to go over the maximum size limit?
Many thanks
View 5 Replies
View Related
Feb 14, 1999
Can some one please help.
Lately I am getting an error:
LAZY WRITER WARNING: LRU List is Empty
Than the system locks!
can anyone help. This is driving us crazy.
There is no reference in the KB. We are trying to insert records into a table by a SP.
Thanks,
John
View 2 Replies
View Related
May 20, 1999
I'm running SQL Server 6.5, with the latest Service pack on NT 4.0 with SP4. A couple of days ago I started getting a warning message in my event log right after a scheduled task ran. The scheduled task calls three stored procedures (data dumps for master, msdb, and a production database) it also runs a consistency check on each before dumping them. I can interactively run each stored procedure and get NO error messages. Prior to getting the warning message (which occurs after the scheduled task runs) I get normal informational entries that the dumps occurred without a problem and the files are written to the proper area. The error is in the Task Engine category and are Warning type messages. Here is the text:
SQL Server Scheduled Task: 27, 'Proddata Dump' -- Status: Failed
-- Task Invoked on: 5/20/99 5:00:00 AM -- Message: Database 'ASSMTCTRPROD' (116647 pages) dumped to file <1> on device 'D:DATDUMPASSMTCTRPROD_990520_DATA.DMP'. (Message 4035)
Any help that anyone could give would be greatly appreciated. Thanks
View 1 Replies
View Related
Jul 23, 2002
Hi
I'm getting a strange sql server agent warning in my server's event log (not in the sql server log). Its occurring after each agent job runs and says:
"Unable to determine if the owner (sa) of job Trans Backup has server access (reason: Unable to connect to server - check SQL Server and SQL Agent errorlogs)."
I have checked the errorlogs - nothing.
My job completes OK, but I get this warning.
I'm running SQL Server 2000 SP2.
I'm running in a cluster.
The problem has only occurred since a reboot yesterday.
Any Ideas?
Thanks in advance.
Andy
View 2 Replies
View Related
Feb 8, 2008
Hi All,
I've recently restored one of my development databases from it's production backup. The restore completed successfully, users were able to connect to the database without any problems. However, when I checked the error log I found the following message:
Bypassing recovery for database 'Test' because it is marked IN LOAD.
I could not find anything on the web or in BOL. Any ideas?
Thanks.
View 3 Replies
View Related
Feb 25, 2004
I use VB 6.0 with ADO 2.6 to access an SQL-server.
I know that the table I wish to create generates this warning.
But from today ( without any changes to the SQL-server ) , this warning is reported as an error to the client instead of continuing.
So my error trap routine traps this as an error now.
I have a workaround that I would to avoid and that's reinstalling the SQL-server ( Only the MSSQL ).
Does anybody know a better solution.
PS : Changing the table structure is not possible in this case.
Thnx in advance,
Sven Peeters
Belgium
View 2 Replies
View Related
Sep 18, 2007
Hello there
I installed sql server 2005 developer edition
and the only error message i got was.
- IIS Feature Requirement (Warning)
Messages
IIS Feature Requirement
Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online.
how do i get hold of Internet Information Services
I installed it on vista premium.
Please help
Regards
ROB
View 3 Replies
View Related
Nov 30, 2007
While intalling SQL 2005 on an x64 machine, I got an error message that warned that some functions of SQL would not install unless IIS was installed (and enabled) on the machine. It did not say what would not install, but I gather it is Reporting Services. I don't recall getting these warnings in previous (32 bit) installations of SQL 2005.
On the other hand, when I go into the BI Intelligence Studio on
a (32 bit) server that does not have IIS, I seem to be able to create
a report anyway (Not really my area of expertise ). Does that mean that Report Services is working without IIS?
View 1 Replies
View Related
Jul 23, 2005
Hi,I have a few create table statements which create temporary tablesthat has row definitions which exceeds the 8060 size limit, this causesa warning message being generated (Message 1708).Is there a way I can disable/avoid the warning message from beingprinted ?Thanks,joe
View 2 Replies
View Related
Jul 20, 2005
Awhile back there was some discussion about ways of sending multiplerows of data to SQL Server. The ADO .UpdateBatch method was one ofthe possibilities mentioned, and Erland said he thought that probablyonce the data get to SQL Server they are probably actually insertedone row at a time. I just want to say that based on an experience Ihad a couple of days ago I am now sure that is the case. I was using..UpdateBatch for something quick and dirty I had to do just once andwas too lazy to use XML for. An error was generated during the..UpdateBatch process because of invalid data in one row. However, alarge number of the rows in the batch WERE written to the database.Until now I haven't used .UpdateBatch in a production environment onlybecause this implies granting INSERT or UPDATE privileges to the user.But based on this experience I would NEVER use .UpdateBatch in aproduction environment, even for a user like a batch job where thepermissions would not be an issue.FWIW.
View 11 Replies
View Related
Apr 8, 2008
Hello All,
I have an SSIS package which uses a third party RMS driver. It is not licensed and so it throws a warning messagebox when the package is run and every time the connection is used. Is there a way to suppress these messages so that the package can be scheduled and run without user interaction?
Thanks
Arun
View 10 Replies
View Related
Aug 23, 2007
I don€™t know if this is the case but I need some help. We have itanium server with Microsoft SQL Server 2005 - 9.00.3054.00 (Intel IA-64) Mar 23 2007 18:42:19 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2).
We has had lot of problem with that the sqlserver.exe process hangs 100% cpu. It€™s totally non responsive I€™m not even able to contact the server with DAC. The general solution has been just kill the process. Not nice.
https://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=440746&SiteID=17
The log is full of those
Date,Source,Severity,Message
08/16/2007 09:00:38,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
08/16/2007 08:55:17,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
08/15/2007 13:06:09,spid4s,Unknown,LazyWriter: warning<c/> no free buffers found.
08/14/2007 10:07:08,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
08/09/2007 11:07:29,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
08/06/2007 09:41:13,spid2s,Unknown,LazyWriter: warning<c/> no free buffers found.
08/06/2007 09:14:50,spid2s,Unknown,LazyWriter: warning<c/> no free buffers found.
08/06/2007 08:54:38,spid2s,Unknown,LazyWriter: warning<c/> no free buffers found.
08/06/2007 08:24:59,spid2s,Unknown,LazyWriter: warning<c/> no free buffers found.
08/03/2007 11:09:54,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
08/01/2007 12:30:56,spid2s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/31/2007 10:16:45,spid2s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/30/2007 10:44:22,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/24/2007 01:03:36,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/23/2007 01:02:33,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/16/2007 12:27:52,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/16/2007 12:25:12,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/16/2007 11:54:07,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/16/2007 11:44:16,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/14/2007 01:04:15,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/12/2007 06:18:51,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/12/2007 06:06:49,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/10/2007 13:20:08,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/10/2007 13:10:43,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/09/2007 10:36:27,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/09/2007 10:28:46,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/06/2007 10:12:20,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/06/2007 10:09:39,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/06/2007 10:06:19,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/06/2007 10:01:28,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/06/2007 01:17:08,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/06/2007 01:13:47,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/04/2007 10:41:06,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/03/2007 10:24:24,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
07/03/2007 01:22:44,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
06/28/2007 01:03:03,spid3s,Unknown,LazyWriter: warning<c/> no free buffers found.
LazyWriter: warning, no free buffers found.
We used to solution to set a fixed as told in the post above and after that the problem went away. At least for the last 4 days.
Is this LazyWriter not fixed in SP2 for itanium or what?
View 5 Replies
View Related
Apr 30, 2008
All,
I am able to "CREATE ASSEMBLY" for the stdole.dll without issue, however, I receive the warning:
Warning: Assembly "stdole" was built using version v1.0.3705 of the
.NET Framework. SQL Server currently uses version v2.0.50727.
(Microsoft SQL Server, Error: 6215)
I am unable to find a PIA for stdole that is .NET 2.0. Has anyone resolved this warning? Can I create a 2.0 PIA myself without causing other problems?
Thanks in advance for your thoughts.
View 3 Replies
View Related
Sep 21, 2006
Hi,
when using lookup i am geting the following warning.our OLEDB connection is Oracle.how to resolve this will this have any performance impact.
[Lookup [14342]] Warning: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.
Thanks
Jegan
View 5 Replies
View Related
Nov 2, 2006
Hi!
I'm running dtexec with the /WarnAsErrors flag, to be sure to detect any configuration warning (configuration errors are actually throwed as warning, which is not sufficient) or any other important warning.
I only get one warning (0x80047076, optimisation warning). Is there a way to disable this specific warning ?
thanks
Thibaut
View 1 Replies
View Related
May 11, 2006
I have insured that I have the x86 version downloaded of both the ver. 2.0 .net foundation. I have insured that I meet the min. requirements of all software requirements. For the Std. edition my hardware reports I exceed the minimum requirements. For the Adv. edition my hardware meets the min. mem. requirements.
I proceed with the Adv. installation, I find a warning during the preamable or the installation support tools regarding insufficient hardware. I then back out of installation, I remove the /program files/ms sql folder and verify registry is cleared.
I proceed to install the std. edition, I find the same warning as above. I suspect I have an error in the hardware profile reporting tool. I then search for a ms analysis tool equivalent to the one used by SQL 2k5 express to no avail.
As this installation is a requirement for classes I find myself a little frustrated; however, expert assistance would be most welcome. Note: In either case of the above installations I can proceed with the installation; however, the client fails. This issue does not appear resolveable with normal user access tools, suggestions for a Remedy in the next few hours will be most welcome. Class starts tomorrow.
Sincerely,
Dave Cooke
View 3 Replies
View Related
Oct 24, 2006
Is there any way to avoid the Warning:
Document contains one or more extremely long lines of text. These lines will
cause the editor to respond slowly when you open the file. Do you still
want to open the file?
on every file containing a Script Component?
I've got a project with about 21 packages, ~ 3/4 of them having multiple Script Components and every single one of them makes me click through the warning dialouge to open the file. That means simply opening the project takes about three minutes and almost complete attention through the entire process. Builds offer the same headache since the creation of a Deployment utility inexplicably requires every file in the project be open.
As far as I can tell, the warning is a result of Script Components being included in the .dtsx file as a pre-compiled binary. I didn't specifically ask for the binary to be included in the file, so why would the standard behaviour raise a warning dialouge by default?
Please tell me I'm doing something wrong.
View 3 Replies
View Related
May 19, 2006
I am using Reporting Services 2005 on SQL Express with Advanced Services...
I am dipping into the SOAP API and trying to add DataSources and Reports dynamically, as is how I would like to be able to deploy them...
My problem is this:
I have a shared datasource and a report that were deployed to the server via the 'Deploy' method in VSTS...I can access that report just fine, and it obviously uses the shared datasource...
Next, I copy the .rdl file of the report I already deployed and give it another name ("NewReport.rdl"). What I want to do is add this report to the server (it's an exact copy of the functioning report with a different report name). This report should use the same shared datasource as the other report.
Here is my code:
ReportingService2005 rs = new ReportingService2005();
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
Byte [] reportDefinition = /* read in the rdl file and create byte array out of it (didn't want to paste this code, cuz you don't care...trust me, it's correct */
ReportingTest.localhost.Warning [] warnings = rs.CreateReport("NewReport", "/ReportServerTest", true, reportDefinition, null);
foreach (ReportingTest.localhost.Warning warning in warnings)
{
Console.WriteLine(warning.Message);
}
The report is added to the server just fine, but I receive this 1 warning:
Code: "rsDataSourceReferenceNotPublished"
Message: "The data set €˜AdventureWorksTestDataSource€™ refers to the shared data source €˜AdventureWorksTestDataSource€™, which is not published on the report server."
And then when I try to view the report, I get this exception:
"The report server cannot process the report. The data source connection information has been deleted. (rsInvalidDataSourceReference)"
I know that the datasource is there, because the other report still works just fine...and I am adding an exact COPY of that report's RDL to the server, so it SHOULD work, IMO...
Any word on this?...I haven't been able to find much on this error...they say that an 'rsInvalidDataSourceReference' is usually caused when the datasource doesn't exist on the server when the report is deployed...or the datasource is deleted after the report has been deployed, but this is not true in my case...
Thanks for any feedback!!
Russ
View 9 Replies
View Related
Feb 13, 2008
I have a Derived Column transformation that pads some string fields with spaces, out to the field's maximum length using an expression similar to
rt_tran_date_bill + REPLICATE(" ",20 - LEN(rt_tran_date_bill))
This gives me a warning
"
Warning: 0x800470D8 at Merge Assessments and Invoices, Derived Column 1 1 [11661]: The result string for expression "rt_tran_date_bill + REPLICATE(" ",20 - LEN(rt_tran_date_bill))" may be truncated if it exceeds the maximum length of 4000 characters. The expression could have a result value that exceeds the maximum size of a DT_WSTR.
Is there any way to suppress the warning, or construct the expression so that it doesn't generate the warning?
In this example rt_tran_date_bill will never exceed 20 characters
View 10 Replies
View Related
