I have a need to create a Web Service to open a SQL database review and change a record then save it back to the same database.
Where can I find a nice simple VB example of this?
VB is what I know and would like to stick with it.
HI,
My requirement is to insert/update DB2 files once the data is ready in SqlServer. As the DB2 connection itself is taking around 8 - 10 seconds we are moving the insert/update operation from UI(Aspx) to Batch Jobs(SSIS). The UI will pull the ID to service broker queue and the SSIS package configured to run every 15 minutes will pick the ID from queue and run select to get all the details and updates DB2 database.
Please advice the above usage of SSIS and Sevice Broker can be in a better way.
Thx-
Sami
Please do not tell me to go to the MS site coz I did not see any helpful step by step how to install this service pack to my SQL Personal Edition. So please anyone, SQL Guru, post here how to install the SP3 for PERSONAL EDITION - not the DESKTOP Engine. Thank you so much...
View 3 Replies View Relatedhi alli am trying to update or delete a row/record in table cptcodesthe error i am getting iskey column information is insufficient or incorrect to many rowswere affected by update....can you tell me wat causes the above Errorthis is a new table no primary keys set or index's or constraints just asingle table with some datain it...all columns are char nulls allows except the key field but noprimary set as yetthanks for the helpdave
View 2 Replies View RelatedI upgraded the OS on my SQL 2005 SP2 to Windows 2003 SP2. Everything still works fine but now Windows Update says that I need SQL 2005 SP2 again. I checked the version of SQL on the server and it's still SP2. Did the Windows service pack somehow downgrade parts of my SQL installation? I know I can probably just reinstall the SQL service pack but I was just curious...
View 2 Replies View RelatedHi,
I have an c# windows service, which is running on the same machine where my mssql server is installed. This service must be informed for each insert/update/delete event on one specific table.
My idea was to create an CLR Trigger for this table which can communicate with this service via .NET remoting. But the problem is, that the system.runtime.remoting assembly is not integrated within the mssql clr enviroment => i can't use remoting.
Are there any other idea's how can i solve this?
Best regards,
Thomas
If you were to do a fresh install it would set permissions on the disk so everything just works.
Now when changing the service account (e.g. to a domain user) use the configuration manager, does it do the same magic (possibly sans if the database data/log files are on another disk)? Or do you need to trawl through the dozens of folders and assign rights manually?
I have a question about Service Packs and Cumulative Updates for SQL 2008 R2.
Do you need to apply them in the order that they are released? Or can you just apply the latest Service Pack and Cumulative Update?
When updating automaticallly, this update always fail, I have put the configuration manager /server browser : the only one that was disabled, on manual (I have not the automatic option for this one) but nothing works, what can I do ? This is a new laptop I have got (XP pro) and I am going through the process of updating many things, only this one fails, any help appreciated.
View 5 Replies View RelatedUsing VS05 Pro SP1 with the SQL version below...
From the Windows update site and also via automatic download of updates, the following update fails every time...The SQL it is trying to update works fine.
The following updates were not installed:
Microsoft SQL Server 2005 Express Edition with Advanced Services Service Pack 2 (KB 921896)
Any idea what the problems are?
Thanks, Bob
I've been trying to install the following update: Microsoft SQL Server 2005 Express Edition Service Pack 2 (KB 921896). I always recieve the following error: 2B22,
Please advise on a fix for this.
Regards,
I have an almost virgin install of SQLExpres running on a WIN2K Pro system.
Have been able to create and connect db to Access 2000 without problem.
Now I wish to extend to remote connections. Using Surface Area Configuration tool, I changed Remote Connections to Local and Remote.
Whenever this setting contains TCP/IP and I try to restart the service I receive the following errors:
System Log:
The SQL Server (SQLEXPRESS) service terminated with service-specific error 10013.
Application Log:
Server TCP provider failed to listen on [ 'any' <ipv4> 0]. Tcp port is already in use.
TDSSNIClient initialization failed with error 0x271d, status code 0xa.
TDSSNIClient initialization failed with error 0x271d, status code 0x1.
Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
If I change back to Local Connections Only or Local and Remote using named pipes only, the service starts up again without a problem.
After five days of investigating, researching, reinstalling and waiting I have to ask for help.
Any suggestions or leads?
Thank You in advance.
I have a VM with SP2013 and SQL Server 2012 SP1. I have installed the powerpivot plugin SP1.But when I run the PowerPivot for SharePoint 2013 configuration tool.
View 3 Replies View RelatedHello! I have the following problem. I developed CLR Stored Procedure "StartNotification" and deploy it on db. This sp calls external web service. Furthermore, this sp is called according with SQL Server Agent Job's schedule. On my PC SQL Server works under Local System account and this web service is called correctly (Executed as user: NT AUTHORITYSYSTEM). But on ther other server the following exception is raised during job running:
Date 17.04.2007 16:42:10
Log Job History (FailureNotificationJob)
Step ID 1
Server MSK-CDBPO-01
Job Name FailureNotificationJob
Step Name MainStep
Duration 00:00:00
Sql Severity 16
Sql Message ID 6522
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: CORPmssqlserver.
A .NET Framework error occurred during execution
of user defined routine or aggregate 'StartNotification':
System.Security.SecurityException: Request for the permission of type
'System.Net.WebPermission, System, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089' failed. System.Security.SecurityException:
at System.Security.CodeAccessSecurityEngine.Check(Object demand,
StackCrawlMark& stackMark, Boolean isPermSet)
at System.Security.CodeAccessPermission.Demand()
at System.Net. The step failed.
What is the reason of this behaviour? Unfortunately I do not have direct access to this server.
I have the following guesses:
1) CORPmssqlserver may have not enough permissions to call web service
2) Something wrong with SQL Server account's permissions
2) Something wrong with SQL Server Agent account's permissions
I will take the will for the deed. Thanks.
We are using the whole BI-package from Microsoft - from SQL, DTS-package,Raporting Service and Analyze Service.
It should be very helpful to be able to create a metadata databases where you could find all releations between different objects (tables,views,reports,cubes,DTS-package,Databases.
Just to get answer for: 'where is view xxx used', 'what are Report xxx depending upon'.
While everything exists in different SQL databases it should possible to do.
Has anyone any comments or the same needs ?
I have a initiator and a target service broker peer.
Both are controlled by a C# unit test. The initiator uses the Microsoft.Samples.SqlServer class. The target service uses stored procedure activation.
Sending a message from the initiator to the target, saves the content of the message, along with its conversation handle in the target's database specific table.
The unit test needs - at a later time - to instruct the target to send a message back on the same conversation handle to the initiator service.
For this the C# unit test creates a Conversation off of the saved conversation handle:
Service client = new Service("cleintservicename", conn, tran);
Conversation dialog = null;
dialog = new Conversation(client, convHandle);
Sending the message on this dialog generates an error "Message body: <Error xmlns="http://schemas.microsoft.com/SQL/ServiceBroker/Error"><Code>-8495</Code><Description>The conversation has already been acknowledged by another instance of this service.</Description></Error>".
Is the error due to the fact that a service - using the activated stored procedure already picked up the conversation, so that a new reference to the service can not be created through the Service class in CLR?
If so, I might need then to skip the activated stored procedure in favor or a CLR service, alltogether?
Any help - greatly appreciated.
Hi All,
We seem to be being plagued by the error below by our SQL Server agent. This happens almost everytime we restart the server that has been running for a day or two.
Our SQL Server Agent uses a none expiring domain credential. I understand that this problem only happens when the profile being used by the SQL Servr Agent has changed (password change). What puzzles me is that the login is A ok and no changes has been made to it's password.
We always resolve this problem by changing the login used in the SQL Server Agent to local and after that, returning it back to it's original domain login. Unfortunately, we cant always do this everytime something goes wrong.
Can anyone please help us shed a light on this? We're using SQL2k with SP3a. Thanks!
Error:
An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation on the SQLServerAgent service.
Regards,
Joseph
I am trying to send a message between to SQL Server 2005 instances on two different machines. I have checked all my routes and all my objects appear to be setup correctly. However, when running Profiler on the target machine, I receive the "This message has been dropped because the TO service could not be found. Service name: "[tcp://mydomain.com/TARGET/MyService]". Message origin: "Transport". This is my activated stored procedure that is sending the message to the target service. I am using certificate security. Any help appreciated....
CREATE PROCEDURE [usp_ProcessMessage]
AS
BEGIN
SET NOCOUNT ON;
DECLARE @conversation_handle uniqueidentifier
DECLARE @message_body AS VARBINARY(MAX)
WHILE (1=1)
BEGIN
BEGIN TRANSACTION;
WAITFOR(RECEIVE TOP (1)
@conversation_handle = conversation_handle,
@message_body = message_body
FROM [tcp://mydomain.com/INITIATE/MyQueue]
), TIMEOUT 1000;
IF (@@ROWCOUNT = 0)
BEGIN
COMMIT;
BREAK;
END
END CONVERSATION @conversation_handle
IF @message_body IS NOT NULL
BEGIN
BEGIN DIALOG CONVERSATION @conversation_handle
FROM SERVICE [tcp://mydomain.com/INITIATE/MyService]
TO SERVICE '[tcp://mydomain.com/TARGET/MyService]'
ON CONTRACT [tcp://mydomain.com/INITIATE/MyMessage/v1.0]
WITH ENCRYPTION = ON, LIFETIME = 600;
SEND ON CONVERSATION @conversation_handle
MESSAGE TYPE [tcp://mydomain.com/TARGET/VisitMessage]
(@message_body);
END
COMMIT;
END
END
GO
My endpoints are created like so:
CREATE ENDPOINT MyEndpoint
STATE = STARTED
AS TCP
(
LISTENER_PORT = 4022
)
FOR SERVICE_BROKER (AUTHENTICATION = CERTIFICATE MasterCertificate)
GO
GRANT CONNECT TO CertOwner
GRANT CONNECT ON ENDPOINT::MyEndpoint TO CertOwner
GO
And my routes like so:
GRANT SEND ON SERVICE::[tcp://mydomain.com/INITIATE/MyService] TO CertOwner
GO
CREATE REMOTE SERVICE BINDING [MyCertificateBinding]
TO SERVICE '[tcp://mydomain.com/TARGET/MyService]'
WITH USER = CertOwner,
ANONYMOUS=OFF
CREATE ROUTE [tcp://mydomain.com/INITIATE/MyRoute]
WITH SERVICE_NAME = '[tcp://mydomain.com/TARGET/MyService]',
BROKER_INSTANCE = N'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx',
ADDRESS = N'TCP://xxx.xx.xx.xx:4022'
GO
I have configured an instance to use static port, say 1435, and I turned off the Browser service.
I would like to know if I can use SSMSE to connect to the instance database directly. The instance is listening at port 1435 and accepting connection requests from other methods.
What I need to put into the "Server name: " field?
Normally, it would be like: <serverIP><InstanceID> with Browser turned on.
Now how do I add the port information to it, I tried
<serverIP>:<portNumber><InstanceID>
<serverIP><InstanceID>:<portNumber>
<serverIP><InstanceID> <portNumber>
None of them worked.
Any suggestions?
Thanks.
All,
I am looking at implementing some sort of throttling whereby "expensive" reports are setup as Subscriptions (and hence are run by the Windows Service), while all other requests go the Web Service.
My question is:
Do the two systems share any underlying systems? I understand (of course) that they use the same DB, etc. etc. However, I can't quite tell whether there is an underlying engine that is a common base or if they really just spin up different instances of the same objects and essentially each host the application separately?
Any help is greatly appreciated!
Mark
I am currently hardening our SQL 2012 (with AlwaysOn Availability Groups) environment. Both the SQL service and agent account are using service accounts (only domain user). SQL browser service is disabled. Permissions to all roles are handled by using domain groups.
Currently a lot of (default) NT Service accounts are listed (some with sysadmin privileges). Are there accounts that can be removed?
Hi all,
I do understand that it is highly recomended to have aserprate user (perfered a domain user account) for each of the SQL Server service and SQL Agent service.
What is the reason behind that? (Someone told me to not run the service with an account that has a powerul privilegs! - I don't undrstanmd this point can you explain it please?)
What is the diffrent between: 1- Local System account 2 -Network Service account
Thanks in advanced!
CS4Ever
Hello,
In our project, we would like to use the same data source for our analysis service database cubes and for our reporting service reports.
I created the analysis service project first, deployed successfully. When trying to setting up the data source in the report model project, I selected the "create a data source based on another object", and then selected the "create a data source based on an analysis service project". However, there is no analysis service project to select, and no browse button to see where the reporting service is looking for analysis service project either.
I have tried creating a new analysis service project with data source views, cubes, dimensions and all the stuff, but still cannot see the analysis service project in the drop down box to be selected for my reporting model project data source.
As I am fairly new to the reporting service, I'm sure I'm missing something, but couldn't find much information in the help or on the web. Any suggestion would be much appreciated.
Thank you very much,
Annie
Hi,
I am trying to install MS Sql Server 2000 on my machine. The OS on my machine is Windows XP SP2. During the installation i keep getting an error message, "Setup failed to configure the server. Refer to the server error logs and C:WINDOWSsqlstp.log for more information." I have copied an extract from the sqlstp.log file below:
10:05:28 Process Exit Code: (-1)
10:05:31 Setup failed to configure the server. Refer to the server error logs and C:WINDOWSsqlstp.log for more information.
10:05:31 Action CleanUpInstall:
10:05:31 C:WINDOWSTEMPSqlSetupBinscm.exe -Silent 1 -Action 4 -Service SQLSERVERAGENT
10:05:31 Process Exit Code: (1060) The specified service does not exist as an installed service.
10:05:31 C:WINDOWSTEMPSqlSetupBinscm.exe -Silent 1 -Action 4 -Service MSSQLSERVER
10:05:31 Process Exit Code: (0)
10:05:31 StatsGenerate returned: 2
10:05:31 StatsGenerate (0x0,0x1,0xf000000,0x200,1033,303,0x0,0x1,0,0,0
10:05:31 StatsGenerate -1,531793)
10:05:31 Installation Failed.
Can someone please help me solve this problem?
Cheers...
With the new improvments to the web service task, we can now use variables as arguments in web service calls. I am trying to setup a call to the amazon web service ECS. I am trying to do a simple sellerlookup. I have played with the settings and gotten nowhere. I get one of two error when I try to execute. I can always use a scripting task or write my own task, but I would like to use the built in task if it is possible. Has anyone used AWS with SSIS?
[Web Service Task] Error: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: Could not execute the Web method. The error is: Object reference not set to an instance of an object.. at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection) at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection, VariableDispenser taskVariableDispenser) at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()".
or
[Web Service Task] Error: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: Could not execute the Web method. The error is: Method 'ProxyNamespace.AWSECommerceService.SellerLookup' not found.. at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection) at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection, VariableDispenser taskVariableDispenser) at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()".
Microsoft recommends that you do not use the Network Service account to run the SQL Server service (see http://msdn2.microsoft.com/en-us/library/ms143504.aspx).
Can anyone tell me what the drawbacks are of doing this?
Okay now this is weird, today the Reporting Services was not running and here are the entries in the event log:
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7041
Date: 12/12/2007
Time: 9:47:22
User: N/A
Computer: TFS
Description:
The ReportServer service was unable to log on as DOMAINTFSREPORTS with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: ReportServer
Domain and account: DOMAINTFSREPORTS
This service account does not have the necessary user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, a Group Policy object associated with this node might be removing the right. Check with your domain administrator to find out if this is happening.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp
I am the administrator of the machines and I can assure you that no domain policy has changed for a couple of weeks. What should I look for?
I am doing some research to see if the Service Broker technology would help my company with our Enterprise application. Here is our scenario: We have a 3 tier system. The first tier needs to contact the second tier asynchronously. Hence, using queues is a good option. However, the process that needs to happen on the second tier is mostly process intensive with little database updates. Is it still worth our time to use Service Broker?
I like the concept of Activation that Service Broker provides. But, from what I am reading most of the documentation describes activation as a way to call another stored proc. I definitely dont' want to do any process intensive work on the SQL server. So here comes my question...
How would I use a windows service to listen to the activation event from the Service Broker. I could have multiple windows services watching the same queue (scalable). Would I have to handle collisions myself? If so, I think I would rather keep it simple, and just use a simple table as my queue.
Thanks for your comments in advance...
Vijay.
How to prevent the hang on the initator service broker if the target service broker is not started?
Our case has two service brokers (two databases), sometime, the target is need to turn off. But the sitation is the initator service broker (in fact, the message is sent from triggers) become hang, I want to prevent this case and continue to operation, and the messages should queue and will continue to send to target service broker when it startup. How should I do?
i have a list report
some values of this are blank or null
i want to avoid that spacing if it is null
like
name:jjj
lastname kkk
firstname
address uuuu
i want it should be
name jjj
lastname kkk
address uuuu
Hi,
I am using SQL Server 2005 Reporting Services. I want to make it secure. I am also using WCF services and made them secure using Claim based System.Identity Model.
I want to apply same claim based model to Reporting Services.
How can I do that?
Amit
What's up with this?
This takes like 0 secs to complete:
update xxx_TableName_xxx
set d_50 = 'DE',modify_timestamp = getdate(),modified_by = 1159
where enc_id in
('C24E6640-D2CC-45C6-8C74-74F6466FA262',
'762E6B26-AE4A-4FDB-A6FB-77B4782566C3',
'D7FBD152-F7AE-449C-A875-C85B5F6BB462')
but From linked server this takes 8 minutes????!!!??!:
update [xxx_servername_xxxx].xxx_DatabaseName_xxx.dbo.xxx_TableName_xxx
set d_50 = 'DE',modify_timestamp = getdate(),modified_by = 1159
where enc_id in
('C24E6640-D2CC-45C6-8C74-74F6466FA262',
'762E6B26-AE4A-4FDB-A6FB-77B4782566C3',
'D7FBD152-F7AE-449C-A875-C85B5F6BB462')
What settings or whatever would cause this to take so much longer from the linked server?
Edit:
Note) Other queries from the linked server do not have this behavior. From the stored procedure where we have examined how long each query/update takes... this particular query is the culprit for the time eating. I thought it was to do specefically with this table. However as stated when a query window is opened directly onto that server the update takes no time at all.
2nd Edit:
Could it be to do with this linked server setting?
Collation Compatible
right now it is set to false? I also asked this question in a message below, but figured I should put it up here.
I am hoping someone can shed light on this odd behavior I am seeing running a simple UPDATE statement on a table in SQL Server 2000. I have 2 tables - call them Table1 and Table2 for now (among many) that need to have certain columns updated as part of a single transaction process. Each of the tables has many columns. I have purposely limited the target column for updating to only ONE of the columns in trying to isolate the issue. In one case the UPDATE runs fine against Table1... at runtime in code and as a manual query when run in QueryAnalyzer or in the Query window of SSManagementStudio - either way it works fine.
However, when I run the UPDATE statement against Table2 - at runtime I get rowsaffected = 0 which of course forces the code to throw an Exception (logically). When I take out the SQL stmt and run it manually in Query Analyzer, it runs BUT this is the output seen in the results pane...
(0 row(s) affected)
(1 row(s) affected)
How does on get 2 answers for one query like this...I have never seen such behavior and it is a real frustration ... makes no sense. There is only ONE row in the table that contains the key field passed in and it is the same key field value on the other table Table1 where the SQL returns only ONE message (the one you expect)
(1 row(s) affected)
If anyone has any ideas where to look next, I'd appreciate it.
Thanks