Hey guy and gals,
I need to connect to a web service from a Sproc, can this be done? I've google and found out about Httpendpoints but that is running the web service on the server, not connecting to one from the server in a sproc. Any ideas or site links would be helpful. TIA.
Jason
Hi there, I am just trying to create an ENDPOINT to define a Web Service in Sql
server 2005. Here is my code
Create ENDPOINT AWService STATE = STARTED As HTTP ( PATH = '/ADVENTUREWORKS', AUTHENTICATION = (INTEGRATED), PORTS = (CLEAR), SITE = 'DEVISQLDM2005' ) FOR SOAP ( WEBMETHOD 'GetProductList' (NAME = 'AdventureWorks.Dbo.GetProductList'), DATABASE = 'AdventureWorks', WSDL = DEFAULT )
and when i run this T-SQL its complaining about
Msg 7807, Level 16, State 1, Line 1 An error ('0x80070057') occurred while attempting to register the endpoint 'AWService'.
I am trying this code to run on Windows XP pro and Sql Server 2005. Any
clue why its complaining about this ?
Thanks -D
Hello, I appeal to all to save me from this situation.
I have a WebService in VB.net by IIS and a operation to connect to the SQL server and run a query and others operations. All fine...
But after a certain time only the SQL operations don't respond nothing, the others are OK. So the problem is not in the IIS i think and something between the IIS and the SQL Server.
Can you give me some light about this PLEASEEEE :D ?
Thanks
If any of you need the source say it.
Thanks
Yes, I know there is at least one other thread about this type of thing, but my error is a bit different............
I have been trying to call a webservice from within a trigger and i keep receiving the following error:
Msg 6522, Level 16, State 1, Procedure wepTestTrigger, Line 1
A .NET Framework error occurred during execution of user defined routine or aggregate 'wepTestTrigger':
System.Security.SecurityException: Request for the permission of type 'System.Security.Permissions.EnvironmentPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
System.Security.SecurityException:
at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet)
at System.Security.CodeAccessPermission.Demand()
at System.Net.CredentialCache.get_DefaultCredentials()
at Triggers.wepTestTrigger()
.
The statement has been terminated.
How or what do I need to do in order to call this webservice?
Thank you for any help.
Wayne E. Pfeffer
If the web service is talking to a SQL Server database and the authentication used is SSPI (Security Support Provider Interface
) / windows authentication, does the ASP.Net user or machine id user
need to be added to the list of allowed ids to the database server? Or
am I misunderstanding the security constraints?
If I run my code through an Nunit test conduit, I can retrieve data,
but If I run it through my webservice it fails authentication.
advTHANKSance
I'm assuming it's possible to call a web service asynchronously from a SQL CLR function, is this correct or is there a fundamental flaw in calling the asynchronous methods?
I've tried coding a sample and despite creating a new thread, which in turn calls the web service asynchronously and using newthread.join I can never get the webmethodasync_completed sub to be called.
Hi Experts,
I have to create Installer or setup for my project.
My project Containg 2 webservices and one applicationProject.
I donot Know About Installer How To create SetUp For AboveProject . I want In setup wizard shows in grid it shows the 2 Webservices and PrudentialApplications. and How To add a sqlserver Bootstrapper in this application.
Regards
Venkat.
Hi,
I need to expose data in a SQL server 2005 database as a webservices. I have 2 options to choose. I can create an End point in sql or build a webservices in .NET.
So what are de advantages and disadvantages of those 2 approaches ?
Of course they want the webservices secure. I know that authentication is not a problem since we use windows integrated security for the intranet. But what will happen if we move to an extranet or the internet ?
But how do you enable authorization ? and Context security ? Is context security better done in .NET then in SQL ?
Thanks in advance.
Hello everyone,
I am newbie in SSIS and I have one problem.
I have defined in Control Flow one WebService Task, specified the WSDL-File.
I have chosen one method from WS as Input. But this method requires one parameter of the ArrayOf_xsd_string type.
If I try to choose it, I receive following error:
===================================
This complex type does not contain any properties. (Microsoft.SqlServer.WebServiceTaskUI)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.CustomGridControl.HandleEllipseBtn(Int64 row, Int32 col)
in my WSDL-File it already defined:
Code Snippet<complexType name="ArrayOf_xsd_string"><complexContent><restriction base="soapenc:Array"><attribute ref="soapenc:arrayType" wsdl:arrayType="xsd:string[]"/>
Could you help me? Where I can define this ArrayOf_xsd_string type, or how can I correct my problem?
Thanks a lot for your Help!
Regards,
I developed a java proxy application for SSRS(Sql Server Reporting services) and able to render the reports by making webservice calls to SSRS webservices. But I am getting the data for the complete report. How can I get only a partial report( like page by page as we get in the Report Manager)? Which parameters should I pass.
As some of the reports are too big, the java application is getting memory issues and I want to limi the data that I get from SSRS.
Appreciate your suggestions.
Hi !!!
I have to use 2 web services !
One (WebServices A) which contains methods I need to call, and the other (WebServices B) which contains a method who returns a autenticationCookie, that I have to use in parameter for call method from WebServices A ?
It is clear ? I hope...
So my question is how I can do ?
I know I can create few dataSet, but how can I pass a data from on dataSet (from my WebServices B) to the query on an other dataSet (from my WebServices A) ?
Thank your help !
I developed one DLL in vb .Net which call two web services (sql endpoints) I wish to use this solution but for hundreds of servers (endpoints) I want to ask if I could do that with dynamic parameters passed to de DLL CALL in sql server clr.
Actually when I compile de DLL I need to have referenced (hardcoded) the webservices (endpoints) and when I need a brand new endpoint I need to reference it, compile the dll and release.
I cannot find how to invoke the service within the DLL with the namespace or webservice name as parameter.
Mi code to invoke now my referenced end point is: (note that my endpoint name is rperez)
Dim CallWebService As New rperez.IntelisisServiceEndPoint
CallWebService.Credentials = System.Net.CredentialCache.DefaultCredentials
Call CallWebService.IntelisisService(ArchivoOriginal)
My class rperez.IntelisisServiceEndPoint is referenced (hardcoded) in the dll project I need it dynamic
Do I need to change my code to PROXY object ?
I have requirement to update/insert the DPID based on the address which are passed as an input values.There are more than one address at the same time and I configured to get the address from the query which are correct and output of the address values will be stored as system object variable.I am then passing the system object variable to for each loop container and I have configured the collection and variable mappings as a variable for each input value.
when I pass the value manually to the web service task it works correctly.When I pass it as a variable to web service task it doesn't return any value.I have a data flow task which converts the ouput from web service task using the xml source converts it to oledb destination.I don't see any rows being written to the target table.
How can I get only one page of data each time when I call the render menthod from the SSRS webservice
View 3 Replies View RelatedWhen I installed VS 2005, it installed the default version of SQL Server 2005 Express that ships with Visual Studio 2005 installer media.
How can apply SQL Server 2005 Express SP1 to update this existing instance?
Currently, if I run this query:
SELECT @@version
I get the following:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
After applying SP1, I should get 9.00.2047.00.
Should I just go to this link and download & install the SQL Server 2005 Express Edition SP1:
http://msdn.microsoft.com/vstudio/express/sql/download/
Thank you,
Bashman
First of all I am planning to install sql 2005 standard and sql standard sp2
on vista ultimate professional using vs 2008 pro
I have some questions about installing sql 2005 what is the best way to install sql 2005 on
vista My article I got this from ms 403393 (upgrading sql standard 2005 to sql standard 2005sp2)
1 sql standard .(shortcut right click from cd/dvd not possible) I have heard command prompt start menu, click cmd
type run D: cd/dvd exe
From a wizard (sql sp2)
2. sql standard sp2
a. upgrade using a wizard
b. open a command prompt (not sure if right click is best option)
install dvd media example dqlserver2005sp2-kb921896-exe SKUUPGRADE=1(is run as administrator option on media)
do I type run or what do I type ?
c. go to system configuration page(where is this) you should see a single warnining you need to install
sp2, the edition should say success if it does not please reapply
d. on the registration page please enter your registeration number
e. on the comments to install please enter database services, reporting services
workstation components, books online and development tools( I wish to install
all components)
f. on the instance page click default instance(default install)
g. finish rest of wizard
h. apply sql sp2
I also have of seperate question of upgrading sql from vista using a Configuring local admin account
account (configuring administration from a wizard-will this notify
me by default) I do not want my administrative priviledges elevated.
I will be using default configurations for my installations.........
I often wish there would a nice picture examples of doing this
Please help
I have a problem regarding forwarding 'n number of parameters' from Visual Studio 2005 using VB to SQL-Server 2005 stored procedure.I have to save N number of rows in my stored procedure as a transaction. If all rows are not saved successfully, I have to roll-back else update some other table also after that. I am unable to handle - How to send variable number of parameters from Visual Stduio to Sql - Server ? My requirement is to use the SQL-Stored Procedure to store all the rows in the base table and related tables and then update one another table based on the updations done. Please Help .....
View 1 Replies View RelatedI am trying to import Access reports using Visual Studio 2005 and Access 2007. SQL Server 2005 with Reporting Services is also installed. I select Reports in the Solution Explorer and then Import Reports... Microsoft Access and browse to my Access database. After I select the database I see it open briefly as if it is trying to import the reports but then Access quickly closes and a error pops up: "You already have the database open." I have checked and double checked and the database is not open. I have even tried several different databases and the same errror occurs. Any help would be greatly appreciated.
We have a large number of clients attempting to replicate two publications on 2005 Express databases (2 publications subscribed to the one subscriber database) with our 2005 Server (9.00.3042.00 SP2 Standard Edition) and experiencing two significant problems:
1) Users experience the following message:
The Merge Agent failed after detecting that retention-based metadata cleanup has deleted metadata at the Subscriber for changes not yet sent to the Publisher. You must reinitialize the subscription (without upload).
This problem should not apparently occur with SQL Server 2005 (or 2005 Express) instances with SP2 applied. All clients experiencing this problem have SP2 installed as does our Server and the retention period is 30 days. The subscribers have been replicating well under that.
2) Replications never succeed after appearing to replicate/loop around for hours
This issue is the most critical as we have clients who have been installed and re-installed with new instances of SQL Server 2005 Express, new empty databases (on subscriber before snapshot extraction), and using fresh snapshots (less than an few hours old) which cannot successfully replicate.
Interestingly there is at least 1 instance where several computers are subscribed and successfully replicating the same database as another where replication refuses to succeed.
To test we have taken a republished database from another 2005 Server which is working fine and restored it to the same server as the one holding the database with which we are experiencing problems and subscribed to it. This test worked fine and replication of both publications went through fast and repeatedly without showing any signs of problem.
This indicates that the problem is perhaps data related as it appears localised to that database.
Below are two screenshots which may assist.
Screenshot 1 Shows that on the server side the replication attempts look like they are succeeding despite the fact that the subscriber end does not indicate success. Also the history indicates the the subscription has spent all it's time initialising and not merging any changes.
Screenshot 2 Shows a rogue process which has appears on many of the problem child subscribers. It shows a process running with no end time even though the job indicates failure in the message and even though other replication attempts appear to have succeeded after it. This process stays in the history showing that it is running even when I can find no corresponding process for it.
Can anyone suggest a further course of action/further testing/further information required which may assist?
This is extremely urgent and any assistance would be greatly appreciated!
Thanks in advance!
Scott
Hi,
Is there any way to measure bandwith usage during merge replication between sql server 2005 and sql server mobile 2005 running on a cradled wm5 mobile device.
Attaching the windows performance monitor to the network connection established over usb would work although I was wondering if there was something specific for this case integrated into Sql server 2005 / sql server mobile 2005 / Sql server management studio / third party tools that i could use ?
thnx,
pdns.
Hi,
I have created a database using VB Express 2005 express edition and I have created number of tables and SP's etc.
I am trying to use the database diagram tool but I get an error stating that the database doesn't have a valid dbo. I say yes to the prompt about making myself a valid dbo but I then get a message stating that I do not have permissions to imprersonate the dbo.
How do I overocome this issue?
Thanks
Bill
Hello everybody!
I hope that someone could help me.
I have a problem when i start sincronyzing with the emulator of MSVS2005 to SQL2005 in Windows Vista. I have the same program in the emulator, but sincronyzing with windows XP Pro and no problem...
I configure the connection to use the IUSR.
The source code that i use:
repl.InternetUrl = @"http://laptop/SQLMobileIIS/sqlcesa30.dll";
repl.Publisher = @"laptop";
repl.PublisherDatabase = @"database";
repl.PublisherSecurityMode = SecurityType.NTAuthentication;
repl.Publication = @"Pubdatabase";
repl.Subscriber = @"SQLMobile";
repl.SubscriberConnectionString = @"Data Source='" + nomeFicheiroBD + "';Password='3409'";
The error that returns is:
"Failure to connect to SQLServer with provided connection information. SQL Server does not exist, access is denied because the IIS user is not a valid user on the SQL Server, or the password is incorrect"
Does anybody knows what i can do?
HELP I NEED SOMEBODY TO HELP!
Thanks!
Is it possible to parm in a value to a SSIS
in my SSIS i have a variable;
Name : FileName
Scope : PackageName
Type : String
Value : ""
I have tried adding the following code in my vb.net project ;
pkg.Variables("filename").Value = "C: emp estfile.001"
pkg.execute()
but come up with the following error
A first chance exception of type 'System.MissingMemberException' occurred in Microsoft.VisualBasic.dll
Public member 'Variables' on type 'IDTSPackage90' not found.
can anyone help ?
I am update/inserting records threw a web form in vb.net. I need to insert 'NULL' into my microsoft sql server database. I am not talking about the below line of code where website is the name of my paramater. If i do that it will just place a blank into that field in the database. If i dont enter anything into that textbox I want it to to say NULL in that field. So if I go into the actual table in the SQL Server Management Studio and look at the website field of the recored I just added or updated and did not type anything into the web site textbox it needs to say NULL. I also tried the second line of code but that places a single quote in front and behind NULL. So the field will have the value 'NULL'.
website.value = txtwebsite.text.tostirng
if txtwebsite.text ="" then
website.value ="NULL"
end if
The reason why I need the NULL there is because I bind the website filed to a hyperlink template in a gridview. The actual text of the hyperlink is bound to PAYER which is a name of a insurance payer but the navigateto is bound to the website field. If i do not enter any data into the website field and it stays as NULL, then when my gridview is loaded, payers that dont have a website will not be underlined and user wont have the option to click on them since there is no value for the navigateto. But if i use my form to update/add a payer and leave the website textbox blank in puts a blank into that field in my database and when it loads that new row into the gridview the PAYER is underlined and u can click on it but it will just take u to the web site is unavailable page. So is there anyway to actaull have NULL placed into a filed and not just blank space
I am out of brain cells. I can not figure out how to upgrade instances of sql express to sql 2005 or even add an instance of sql 2005. I have installed/upgraded everything else (SSMS, etc.) to SQL 2005.
I am dazed and confused. I don't even know where to start in explaining what I have tried and done. I have 303 log files going back to 3/27/2007 from various attempts.
Where do I start in figuring this debacle out???
Just installed SQL Server 2005 and tested my old VS 2005 ASPnet websites, which were connected toSQL Server 2000 databases before. All my websites were created for local HTTP applications, coded with a connection string with User ID and Password. The SQL Server 2000 was configured as mixed authentication (i.e. with User ID and Password). These websites worked very well with SQL Server 2000 database server.Testing my old VS 2005 websites with SQL Server 2005 database, showed a 'Login failed for a User ''.' error msgalthough the 'Test Connection' on VS 2005 design showed a perfect query for e.g. a GridView control. I have assured that the UserID/Password were correct for Management Studio Security object'slogin and Database Security's user. The server instance was configured with mixed authentication mode. One thing I am not sure of is, when clicking the Management Studio icon, a Connection dialog showed up, asking for a Windows or MIxed authentication? I just stayed with the Windows authentication. What does the authenticationmode have anything to do with the VS 2005 website connection? Should I change to mixed authetnication mode?TIA,Jeffrey
View 3 Replies View RelatedHi All,
Parameter passing in SSIS 2005 sometimes appears to be a cumbursome task. I have been digging into this topic for quite some time and here i note down some simple steps to demonstrate parameter passing at Package level.
(1) Create a SSIS project using Business Intelligence 2005 Or VS 2005.
(2) Create datasource (.ds) and Data Source View as required.
(3) A default SSIS Package by the name Package.dtsx is created. Double click this and you are shown tabs for Control Flow, Data Flow, Event Handlers, Package Explorer. On the Control Flow, drap and drop Execute SQL Task from Control Flow Items in the toolbar.
(4) Lets now create a variable at Package level. Right click anywhere in the control flow box (not on the Task created in Step 3 above). Click on the Variables on the context menu displayed. Variables window appears on the left of the screen. Click the Add Variable box in this window to create a variable. Name it var1 (or whatever you may like), Scope as Package, DataType as String and Value as MyValue. This is only the default value.
(5) Now let us edit the SQL Task created in Step 3. Double on it, on the General tab you can change its Name, Description. Set ResultSet as None. We shall proceed to execute a stored procedure by name MySPName and pass it a parameter. Set ConnectionType as OLE DB. Select the connection you creates in step 2. Set SQLSourceType as Direct input. SQLStatement as MySPName ? . Note the ? mark after the name of the stored procedure. This is important to accept the variable value (var1) created in Step 4.
(6) Select Parameter Mapping tab now. Click on Add button. Select the Variable Name as User::var1. This is the user created variable of Step 4. Select Direction as Input, DataType as Varchar and Parameter Name as @var1. Click on OK now.
(7) This sets up the basic of parameter passing. Compile the project to verify everything works. Right Click on the SQL Task and select Execute Task. This will execute the package taking default value of the variable. This can be used along with dtexec command with /set option to pass the parameter at command prompt.
Hi,
I have a central database server that is runnning on SQL 2005 standard edition and Windows server 2003 standard as OS.
I realise that I can use SQL statements to encrypt and decrypt the data inside the standard SQL.
However, how do I read and write the data via an web application coded in C#.net and is also running on the same machine?
Another issue is, I need to replicate some of the data in this SQL standard over to a SQL mobile running on a mobile device running on Windows CE 5.0.
The mobile device also needs to read and write data to the encrypted data via a C#.net application.
Question is, with all these requirements to be met, can I use AES? I know that AES is not available on Windows XP and Windows Server 2000 and I cant find AES in the .net compact framework.
how do i go about ensuring security? how do I ensure that the symmetric key is the same both on the SQL standard and SQL mobile?
thank you.
I currently have SQL Server Management Studio Express 2005 and would like to upgrade my machine to SQL Developer 2005 as easily as possible. Keeping my databases and such.
Any recommendations on the best way to do this would be greatly appreciated.
thanks!
Hi,
Can we install reporting services 2005 in a machine in which is not installed SQL server 2005.?
Thanks
I have a windows forms application that runs on my PC that populates a SQL Server Compact 2005 database and then transfers that .sdf file to my mobile device. The communication between the mobile device and PC is done using the Desktop RAPI class from OpenNetCF (http://www.opennetcf.com/FreeSoftware/DesktopCommunication/tabid/90/Default.aspx)
Anyway, I was previously using SQL Server Mobile 2005 and my populated .sdf was around 1.7 MB and I could transfer it to my mobile device in a minute. Once I switched to SQL Server Compact 2005, the transfer process began taking 3 minutes with a 1.5 MB .sdf file. The SSCE also got bloated more easily so I added in the Compact operation each time after I fully populate the SDF to keep the file size at 1.5 MB, but even then it still takes 3 minutes.
I've done a few tests where I simply switch between the two database versions and that simple switch of the version changes the transfer time. I am dumbfounded trying to figure out what the cause might be. Since it is just a file transfer, why would the version even matter unless somehow SSCE is really not compacting and lying about its actual size.
Has anyone run into anything similar to this or may have any ideas what might be going on?
Thanks.
Hello, I would like to know if anyone here has any information on how to change the default version of SQL Server 2005 Express which ships with Visual Studio 2005 to the new SQL 2005 Express SERVICE PACK 1?
I see a file under disc:vswcuSSESQLEXPR.exe I am wondering if changing that file with the new one from Microsoft Download Center will do it...
There's another file under that folder named sqlexpr32.exe I am wondering what it's for?
Thanks in advance.
Hello, I would like to know if anyone here has any information on how to change the default version of SQL Server 2005 Express which ships with Visual Studio 2005 to the new SQL 2005 Express SERVICE PACK 1?
I see a file under disc:vswcuSSESQLEXPR.exe I am wondering if changing that file with the new one from Microsoft Download Center will do it...
There's another file under that folder named sqlexpr32.exe I am wondering what it's for?
Thanks in advance.