Weird Error Msg Running Similar Scripts In Same Package
Mar 22, 2007
Hello,
I have a package that has a FOREACHLOOP container. Inside the container is a SCRIPT task that runs a stored procedure and writes the output of the sp to a file.
That part works fine.
However, if I add a second script task inside the FOREACHLOOP container, I get error messages when running the second script task.
The second script task is identical to the first script task, except for the connection information. That is, it's doing the same thing, but running the sp on another server.
I tried removing the second script task from the FOREACHLOOP container, and putting it in it's own FOREACHLOOP container, but it still gives the same error.
This is the error I'm receiving:
Error 30009: Reference required to assembly 'System.Xml, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' containing the implemented interface 'System.Xml.Serialization.IXmlSerializable'. Add one to your project.
Line 7 Column 22 through 30
I have a SSIS Project thats been running fine for months up until yesterday.
There's a master package that calls other packages, and when i run it now in Visual Studio, i get a Message Box after each of it's child packages run. The message states:
TITLE: Microsoft Visual Studio------------------------------The designer window cannot be closed while a package is running.Stop the debugger before attempting to close the window.------------------------------BUTTONS:OK------------------------------
This seems to be causing issues, because VS seems to hang on my machine at some point when running master packages, and i think it might due to a message box.
I am running a parent SSIS package (running sp2, 9.0.3042) that calls several child packages.
On our development server, we now cannot run this because we get 1 or more of these errors:
"Error 0x80004003 while preparing to load the package. Invalid pointer . " "Error 0xC0011008 while preparing to load the package. Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored. . "
It is not occuring on the same packages. It varies every time it is run.
I can run every one of the child packages individually, using the same login ID that the parent is executed under.
The parent package works fine on my local machine and other servers running the same version of SSIS. Just not on this server.
I have a DTS package which deletes some rows in a table and then inserts new ones from a Dbase file.
When I execute the package it works perfectly, but when I shedule it as a job it gives this error message:
Executed as user: LOMMELDOMAdministrator. ...DTSStep_DTSExecuteSQLTask_2 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_2 DTSRun OnStart: Copy Data from GRES to [ZNA].[dbo].[GRES] Step DTSRun OnError: Copy Data from GRES to [ZNA].[dbo].[GRES] Step, Error = -2147221164 (80040154) Error string: Class not registered Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts80.hlp Help context: 700 Error Detail Records: Error: -2147221164 (80040154); Provider Error: 0 (0) Error string: Class not registered Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts80.hlp Help context: 700 Error: -2147221164 (80040154); Provider Error: 0 (0) Error string: Class not registered Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts80.hlp Help context: 4700 Error: -2147221164 (... Process Exit Code 5. The step failed.
The deleting of the rows works but the import from the Dbase doens't, I thought it was a security issue. So I made sure the JobAgent has all the rights it needs to access the directory of the Dbase file.
I had created 2 packages... one is the parent package and contains a 50 iterations loop running a secondary package for each iteration... i had reached the following conclusion:
My package takes an average of 5 seconds from the time it ends executing one iteration and starts another... after about 30 iterations... my average time between end and start increases significantly to about 12 secs or even more...
All packages have delay validation set to false, and receive several variables from the parent package... Has for the logging, it is done to files based on a path coming from a variable in the parent package.
To execute the parent package i am using dtexecui.exe and i consider this behavior rather strange... had anyone experienced the same? Can anyone test this?
My environment is a 4 x64 processors with 8gb memory, so i guess its good enough to get 0 secs from end to start
Hi i get a error when i run my SSIS package. Here is the message
Error: 0xC02020A1 at import file, Flat File Source [1]: Data conversion failed. The data conversion for column "su_supplier_code" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.". Error: 0xC020902A at import file, Flat File Source [1]: The "output column "su_supplier_code" (61)" failed because truncation occurred, and the truncation row disposition on "output column "su_supplier_code" (61)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
The funny thing about this is when i run the job a 2nd time it works fine.
Has any one any idea about this error or why the job would work fine the 2nd ?
I am very new to SQL Server 2005, and I am currently trying to migrate a 2000 db to 2005.
I have now migrated all the DTS to SSIS, removing any legacy & replacing with new functionality.
I have been through a group of related packages ironing out any problems. They ALL now run fine when called individually.
However, I am now having problems with the parent package that is used to string these all together. It will not even run the 1st package.
For info, the first task of this package is a "Transfer SQL Server Objects Task". I am copying a few tables with data, but WITHOUT indexes, etc.
Following this, there is an "Execute SQL Task" that creates an index on one of those copied tables.
To get past another issue I had to set the "CopySchema" property of the "Transfer..." task to true, but did not select any schemas to transfer.
Now, when running the PARENT package, it is failing at the 1st step of the 1st package as follows:
Error: 0xC002F325 at Copy LT Data Tables, Transfer SQL Server Objects Task: Execution failed with the following error: "ERROR : errorCode=-1071636471 description=SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "The statement has been terminated.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Cannot insert duplicate key row in object 'dbo.Hidden Hearing Limited$Telemarketer' with unique index 'IX_Hidden Hearing Limited$Telemarketer1'.". helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}".
I have been searching and searching, finding similar problems, and even the same error codes, but nothing quite matching this particular scenario.
I have been trying to set the "DelayValidation" at various levels, but with no luck.
I would greatly appreciate any help in trying to resolve this. Has anyone else had the same, or similar, issue?
I am very new to SQL Server 2005, and I am currently trying to migrate a 2000 db to 2005.
I have now migrated all the DTS to SSIS, removing any legacy & replacing with new functionality.
I have been through a group of related packages ironing out any problems. They ALL now run fine when called individually.
However, I am now having problems with the parent package that is used to string these all together. It will not even run the 1st package.
For info, the first task of this package is a "Transfer SQL Server Objects Task". I am copying a few tables with data, but WITHOUT indexes, etc.
Following this, there is an "Execute SQL Task" that creates an index on one of those copied tables.
To get past another issue I had to set the "CopySchema" property of the "Transfer..." task to true, but did not select any schemas to transfer.
Now, when running the PARENT package, it is failing at the 1st step of the 1st package as follows:
Code BlockError: 0xC002F325 at Copy LT Data Tables, Transfer SQL Server Objects Task: Execution failed with the following error: "ERROR : errorCode=-1071636471 description=SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "The statement has been terminated.".An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Cannot insert duplicate key row in object 'dbo.Hidden Hearing Limited$Telemarketer' with unique index 'IX_Hidden Hearing Limited$Telemarketer1'.". helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}".
I have been searching and searching, finding similar problems, and even the same error codes, but nothing quite matching this particular scenario.
I have been trying to set the "DelayValidation" at various levels, but with no luck.
I would greatly appreciate any help in trying to resolve this. Has anyone else had the same, or similar, issue?
I am running into an error when running a package using a scheduled job under SQL Server Agent account. I am getting following error:
Date 6/12/2007 4:19:15 PM Log Job History (VistaODSFeed)
Step ID 0 Server 006-DEVSQL2005 Job Name VistaODSFeed Step Name (Job outcome) Duration 00:00:00 Sql Severity 0 Sql Message ID 0 Operator Emailed Operator Net sent Operator Paged Retries Attempted 0
Message The job failed. Unable to determine if the owner (ACIsnasir) of job VistaODSFeed has server access (reason: Could not obtain information about Windows NT group/user 'ACIsnasir', error code 0x6ba. [SQLSTATE 42000] (Error 15404)).
ACIsnasir is not the account under which SQL Server Agent service runs. However ACIsnasir has sa priveleges. not sure why am I getting ACIsnasir in the error and not the account under which sql server agent runs.
I run an ssis task with right click in the BIDS. the task transform data of the tables between sql2005 DB to another sql2005 DB. this is the error I get:
Code Snippet An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description:
"Communication link failure". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: The semaphore timeout period has expired. ". helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}". Task failed: CopyTables2
i have a similar task, only diffrent tables that being transfered, same settings. this task run succesfully. for the task that fails it takes a long time to run (something like half an hour, maybe more) and then it falils. the task that succeeds finish fast (something like 5 minutes). the data in the tables that being transeferred in the good task is much smaller than the data in the tables in the failed task.
I created a ssis package to transfer data between tables of sql2005 DB to another sql2005 database. when i run it from BIDS with right click -- > execute package i get this error:
Code Snippet Error: 0xC002F325 at CopyTables1, Transfer SQL Server Objects Task: Execution failed with the following error: "Cannot apply value null to property Login: Value cannot be null..".
I run a ssis package of transferring data between sql2005 databases. I get this error:
Code Snippet Error: 0xC002F325 at CopyTables2, Transfer SQL Server Objects Task: Execution failed with the following error: "ERROR : errorCode=-1071636471 description=An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Could not continue scan with NOLOCK due to data movement.". helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}". Task failed: CopyTables2
i run the package currently with right click on the package on the BIDS.
what is the reason for this error? how can I check it?
Hi I am trying to import a excel file into a table but when i run it i am getting this error and i am not sure what this eror is - Copying to [ICCStatements].[dbo].[Sheet1$] (Error)
Messages Error 0xc0202009: Data Flow Task: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unspecified error".(SQL Server Import and Export Wizard) Error 0xc020901c: Data Flow Task: There was an error with input column "AdminShowInKit" (148) on input "Destination Input" (102). The column status returned was: "The value violated the integrity constraints for the column.".(SQL Server Import and Export Wizard) Error 0xc0209029: Data Flow Task: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "Destination Input" (102)" failed because error code 0xC020907D occurred, and the error row disposition on "input "Destination Input" (102)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.(SQL Server Import and Export Wizard) Error 0xc0047022: Data Flow Task: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Sheet1$" (89) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.(SQL Server Import and Export Wizard) Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.(SQL Server Import and Export Wizard)
I would appreciate if someone can help me with the following:
I have package that I designed on 32 bit system. It was copied over to 64 bit server's directory (Production).
I am trying to execute that package using DtExec utility. My package has some parameters that I am trying to set on the command prompt using /SET option. Everything runs fine on 32 bit system (that is my dev box) but I get the following on 64 bit system (Production):
Command that I am trying to run is: dtutil.exe /FILE "e:external_dataSSISXXX.dtsx" /SET "Package.Variables[User::ASServer].Properties[Value]";"CP_Promotion"
I get the following errors:
Microsoft (R) SQL Server SSIS Package Utilities Version 9.00.1399.06 for 64-bit Copyright (C) Microsoft Corp 1984-2004. All rights reserved.
Option "/SET" is not valid.
On 64 bit system, I don't have 32 bit version of DTExec installed. According to Books On Line the syntax to use DTExec on both 32 bit and 64 bit system are the same. Can /SET not be used in 64 bit system.
I'm having problems when I try to run a package from a job in SQL Server Agent. I have the same package in a server and it works fine,but when I try to install it in a different server I keep getting this error:
Microsoft (R) SQL Server Execute Package Utility Version 9.00.1399.06 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 01:19:10 p.m. Progress: 2007-01-30 13:19:10.40 Source: Delete scripts Execute Process Task Operation Complete: 0% complete End Progress Error: 2007-01-30 13:19:10.57 Code: 0xC0029151 Source: Delete scripts Execute Process Task Description: In Executing "C:Project_SSISDelete_Items.bat" "" at "", The process exit code was "1" while the expected was "0". End Error Progress: 2007-01-30 13:19:10.57 Source: Delete scripts Execute Process Task Operation Complete: 100% complete End Progress Warning: 2007-01-30 13:19:10.57 Code: 0x80019002 Source: Upload data Description: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. End Warning DTExec: The package execution returned DTSER_FAILURE (1). Started: 01:19:10 p.m. Finished: 01:19:10 p.m. Elapsed: 0.5 seconds
I can run it from Integration services Server, from BI, and I tried modifying the ProtectionLevel property to DontSaveSensitive and ServerStorage. I have other packages that run in jobs, and they work fine...but i don´t know what else to do....By the way, I'm using an administrator user to run the package.
Started: 5:05:48 PM Error: 2014-08-21 17:05:50.64 Code: 0xC000F427 Source: File System Task Description: To run a SSIS package outside of SQL Server Data Tools you must install File System Task of Integration Services or higher. End Error
I created SSIS Package to transfer tables from one sql2005 DB to another sql2005 DB. When I execute the package from the BIDS it execute succesfully. However, when I import the package (file system) to the management studio - msdb - stored packages and run the package from there (right click: Run Package) I get this error:
the validate method on the task failed, and returned error code. the validate method must succeed and indicate the result using an out parameter.
This package which is a child package has been running successfully for quite some time now. All of a sudden we are getting these intermittant error messages. Does anyone have any ideas what to do or check for?
thanks
===========================
Error portion
Error: 0xC0047012 at CF-DFT Oracle Sales Fact, DTS.Pipeline: A buffer failed while allocating 100483760 bytes.
Error: 0xC02020C4 at CF-DFT Oracle Sales Fact, order line id [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0x8007000E.
Error: 0xC0047011 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The system reports 30 percent memory load. There are 8587960320 bytes of physical memory with 5972680704 bytes free. There are 2147352576 bytes of virtual memory with 1324290048 bytes free. The paging file has 12673945600 bytes with 10005012480 bytes free.
Error: 0xC0047038 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The PrimeOutput method on component "order line id" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047056 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The Data Flow task failed to create a buffer to call PrimeOutput for output "Union All" (13359) on component "Union All Output 1" (13361). This error usually occurs due to an out-of-memory condition.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "SourceThread1" has exited with error code 0xC0047038.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread2" has exited with error code 0x8007000E.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread3" has exited with error code 0xC0047039.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
Information: 0x40016041 at SRW_ORACLE_SALES_FTBL: The package is attempting to configure from the XML file "D:SSISconfigurationCONFIG-STAGE1.dtsConfig".
Information: 0x40016040 at SRW_ORACLE_SALES_FTBL: The package is attempting to configure from SQL Server using the configuration string ""MSSQL-CONFIG";"[dbo].[SSIS_Configurations]";"System Configuration Settings";".
Information: 0x40016040 at SRW_ORACLE_SALES_FTBL: The package is attempting to configure from SQL Server using the configuration string ""MSSQL-CONFIG";"[dbo].[SRW_SSIS_Configurations]";"SRW Main Configurations";".
Information: 0x4004300A at CF-DFT Oracle Sales Fact, DTS.Pipeline: Validation phase is beginning.
Warning: 0x802092A7 at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: Truncation may occur due to inserting data from data flow column "IC_ORDER" with a length of 240 to database column "IC_ORDER" with a length of 1.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "SERIAL_NUMBER" (2680) on output "Sort Output" (2453) and component "Sort 1" (2451) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "ORG_ID" (13377) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "CUST_TRX_TYPE_ID" (13428) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Data Conversion 1.Copy of CUST_TRX_TYPE_ID" (13443) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "GL_ID_REV" (13449) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Copy of GL_ID_REV" (13458) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x4004300A at CF-DFT Oracle Sales Fact, DTS.Pipeline: Validation phase is beginning.
Warning: 0x802092A7 at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: Truncation may occur due to inserting data from data flow column "IC_ORDER" with a length of 240 to database column "IC_ORDER" with a length of 1.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "SERIAL_NUMBER" (2680) on output "Sort Output" (2453) and component "Sort 1" (2451) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "ORG_ID" (13377) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "CUST_TRX_TYPE_ID" (13428) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Data Conversion 1.Copy of CUST_TRX_TYPE_ID" (13443) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "GL_ID_REV" (13449) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Copy of GL_ID_REV" (13458) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x4004300A at CF-DFT Oracle Sales Fact, DTS.Pipeline: Validation phase is beginning.
Warning: 0x802092A7 at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: Truncation may occur due to inserting data from data flow column "IC_ORDER" with a length of 240 to database column "IC_ORDER" with a length of 1.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "SERIAL_NUMBER" (2680) on output "Sort Output" (2453) and component "Sort 1" (2451) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "ORG_ID" (13377) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "CUST_TRX_TYPE_ID" (13428) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Data Conversion 1.Copy of CUST_TRX_TYPE_ID" (13443) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "GL_ID_REV" (13449) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Copy of GL_ID_REV" (13458) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x40043006 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x400490F4 at CF-DFT Oracle Sales Fact, REV GL SEGS [307]: component "REV GL SEGS" (307) has cached 780 rows.
Information: 0x400490F4 at CF-DFT Oracle Sales Fact, get oper unit [813]: component "get oper unit" (813) has cached 12 rows.
Warning: 0x802090E4 at CF-DFT Oracle Sales Fact, get oper unit [813]: The Lookup transformation encountered duplicate reference key values when caching reference data. The Lookup transformation found duplicate key values when caching metadata in PreExecute. This error occurs in Full Cache mode only. Either remove the duplicate key values, or change the cache mode to PARTIAL or NO_CACHE.
Information: 0x400490F4 at CF-DFT Oracle Sales Fact, get header txn type for IC flag [13685]: component "get header txn type for IC flag" (13685) has cached 768 rows.
Information: 0x4004300C at CF-DFT Oracle Sales Fact, DTS.Pipeline: Execute phase is beginning.
Information: 0x4004800D at CF-DFT Oracle Sales Fact, DTS.Pipeline: The buffer manager failed a memory allocation call for 100484768 bytes, but was unable to swap out any buffers to relieve memory pressure. 83 buffers were considered and 83 were locked. Either not enough memory is available to the pipeline because not enough are installed, other processes were using it, or too many buffers are locked.
Error: 0xC0047012 at CF-DFT Oracle Sales Fact, DTS.Pipeline: A buffer failed while allocating 100484768 bytes.
Error: 0xC0047011 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The system reports 31 percent memory load. There are 8587960320 bytes of physical memory with 5869387776 bytes free. There are 2147352576 bytes of virtual memory with 1223802880 bytes free. The paging file has 12673945600 bytes with 9901600768 bytes free.
Information: 0x4004800D at CF-DFT Oracle Sales Fact, DTS.Pipeline: The buffer manager failed a memory allocation call for 100483760 bytes, but was unable to swap out any buffers to relieve memory pressure. 162 buffers were considered and 162 were locked. Either not enough memory is available to the pipeline because not enough are installed, other processes were using it, or too many buffers are locked.
Error: 0xC0047012 at CF-DFT Oracle Sales Fact, DTS.Pipeline: A buffer failed while allocating 100483760 bytes.
Error: 0xC02020C4 at CF-DFT Oracle Sales Fact, order line id [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0x8007000E.
Error: 0xC0047011 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The system reports 30 percent memory load. There are 8587960320 bytes of physical memory with 5972680704 bytes free. There are 2147352576 bytes of virtual memory with 1324290048 bytes free. The paging file has 12673945600 bytes with 10005012480 bytes free.
Error: 0xC0047038 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The PrimeOutput method on component "order line id" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047056 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The Data Flow task failed to create a buffer to call PrimeOutput for output "Union All" (13359) on component "Union All Output 1" (13361). This error usually occurs due to an out-of-memory condition.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "SourceThread1" has exited with error code 0xC0047038.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread2" has exited with error code 0x8007000E.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread3" has exited with error code 0xC0047039.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
Information: 0x40043008 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DF at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: The final commit for the data insertion has started.
Information: 0x402090E0 at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: The final commit for the data insertion has ended.
Information: 0x40043009 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at CF-DFT Oracle Sales Fact, DTS.Pipeline: "component "TEMP OUTPUT" (998)" wrote 0 rows.
Task failed: CF-DFT Oracle Sales Fact
Warning: 0x80019002 at SRW_ORACLE_SALES_FTBL: The Execution method succeeded, but the number of errors raised (15) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Task failed: CF-EPGT SRW_ORACLE_SALES_FTBL
Warning: 0x80019002 at CF-SQC Facts: The Execution method succeeded, but the number of errors raised (15) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Warning: 0x80019002 at SRW_MAIN: The Execution method succeeded, but the number of errors raised (15) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
I am trying to execute an SSIS package from an MS Access 2003 database that imports a table from the Access database into a target table in SQL 2005. I saved the package in SQL 2005 and tested it out. If I run it from the Management Studio Console with Run->Execute ... everything works just fine. However, if I try to run it using "Exec master.dbo.xp_cmdshell 'DTExec /SER DATAFORCE /DTS SQL2005TestPackage /CHECKPOINTING OFF /REPORTING V'" the execution will always fail when the Access database is open (shared mode). It will only work when the Access database is not open. The connection manager looks like this: "Data Source=E:Test.mdb;Provider=Microsoft.Jet.OLEDB.4.0;Persist Security Info=False;Jet OLEDB:Global Bulk Transactions=1". The error is listed below:
Code: 0xC0202009 Source: NewPackage Connection manager "SourceConnectionOLEDB" Description: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not use ''; file already in use.".
I have installed MS SQL Server 2005 and Service Pack 2 on a new Windows 32-bit environment. I also installed the 32-bit 10g client (the Administrator option). The tnsnames.ora file is configured properly and I can tnsping to the Oracle database without any issues. I have created a package in Visual Studio and it runs successfully when I execute the job manually. I saved the package to the MS SQL Server and when I log into Management Studio to create a job for this package, I receive the following error:
Message Executed as user: xxxSYSTEM. ...rsion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:42:37 AM Error: 2007-10-10 10:42:37.28 Code: 0xC0202009 Source: x Connection manager "x.x" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed.". End Error Error: 2007-10-10 10:42:37.28 Code: 0xC020801C Source: Data Flow Task OLE DB Source [18] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method ca... The package execution fa... The step failed.
I have created the package and logged into the server with the same ID to set up the job. And I have set the ProtectionLevel property to "Don't Save Sensitive Data" since I know this has been an issue in the past when I tried automating the job. I've four posts regarding this error message on the MSDN forums that aren't helpful at this moment - I'm hoping that someone will have found a solution since those posts. Any suggestions are welcomed.
I created a SSIS package which will generate an output file and place it on a remote fileshare location which will look something like this
\RemoteServerNameRemoteFilePath
The package is executing fine when I am executing it through BIDS or through execute package utility and writing the output file to remote file share location.
I created a SQL job for the package and ran the Job. Then, its throwing an error saying
Executed as user: DomainUser. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:33:06 AM Error: 2008-03-10 10:33:22.22 Code: 0xC020200E Source: DFT_Generate Output File Description: Cannot open the datafile " \RemoteServerNameRemoteFilePathOutputFileName.txt". End Error Error: 2008-03-10 10:33:22.34 Code: 0xC004701A Source: DFT_Generate Output File DTS.Pipeline Description: component "FF_DST_Output" (160) failed the pre-execute phase and returned error code 0xC020200E. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:33:06 AM Finished: 10:33:22 AM Elapsed: 15.891 seconds. The package execution failed. The step failed.
DomainUser have all the permissions on the remote file share location. SQL server agent is running with the log-on account DomainUser(same as the above).
I have built a DTS package in SQL Server 2000 to Delete all rows from a table and then import from another table. I have scheduled it run twice a day and everytime it runs, it does not delete anything but imports all the records from another table. So when its done, I have twice the number of records in my final table. Then I go back to the server and execute the package manually and it works perfect. It deletes all and then imports new. I have enabled package logging and it shows both the steps executed perfectly (even when it executes on scheduled time). What can be the problem? Thanks, Bullpit
More than 10 times, i validated the package can be executed successfully, if i use a SQL job to run this package. All data and function goes well, however the job result reported failure after i saw the job 100% completed. That 's so weird.
Anyone met the same the issue. Could anyone give me some suggestion or hints?
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
The master package has a configuration file, specifying the connect strings The master package passes these connect-strings to the child packages in a variable Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s. We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.
The package is run from the file system, through a job-schedule.
We experience the following when running on a not default sql-server instance (called dkms5253uedw)
Case 1: The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.
The master package then executes the first child package. We then in the sysdtslog get:
Error - €œcannot connect to database xxx€? Info - €œpackage is preparing to get connection string from parent €¦€?
The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.
Case 2: When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.
Case 3: When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.
Case 4: When we then stop the sql-server on the default instance, the package faults again, this time with
Error - €œtimeout when connect to database xxx€? Info - €œpackage is preparing to get connection string from parent €¦€?
And the continues as in the first case
From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).
We have tried delayed validation in the packages and in the connection managers, but with the same results (error).
So we are desperately hoping that someone can help us solve this problem.
Hi all, I am creating a dts package to export files from one database to another database. I tried to search for ways to execute the files and found out that i need to add reference to Microsoft.Sql.managedDts. However, I cannot find this reference from my reference. Do i have other alternatives to run this file?
I have a table that I am basically reduplicating a couple of times for each part of this database that I want to create.Each table basically has the same data: The tables will be called motherTable, fatherTable, sonTable, daughterTable and so on.I am pretty much using the following in each column: UserID, MotherID(or FatherID or SonID, etc., etc. and so on for each unique table), FirstName, LastName, MiddleName, BirthPlace, Photo, Age.I don't see an option to copy a table and just modify the second ID part and rename that table accordingly.How can I make this an easier way of creating these similar tables without retyping all these columns over and over again?Thanks in advance.
I am receiving an error on my master package that executes a number of other packages. The individual packages work fine when executed by themselves. However, I am getting the following error when I attempt to execute it from another package:
Error: Failed to acquire connection "conneciton". Connection may not be configured correctly or you may not have the right permissions on this connection.
I was developing a data-driven website but I got this error An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
(I have Sql server 2005 also downloaded before) Please help me cause any website that has data can not be executed even the quick start tutorial that ships with the ASP.NET 2.0 What should I do?
Why does ado.net produce this error when I kow for a fact that there are no connections to any sql server 2005 database involved - this could and probbaly has had people off looking at the wrong connection strings in their web.configs. Note:- The connection string we have is to a sql 200 db I just wanted to make that clear. CheersGegor Error Message:An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)Stack Trace: at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at System.Web.SessionState.SqlSessionStateStore.SqlStateConnection..ctor(SqlPartitionInfo sqlPartitionInfo)
i have a form which takes in a lot of input...one of them is a date field..am passing all the values to the stored proc and inserting into a table from there...pretty simple...however when the user does not enter any value in the field...its errors out as...
