What's Wrong With My Query
Dec 13, 2007
SELECT T1.lnumber AS LOT_Number,(T2.time_out - T1.time_in) AS Duration,
((DATEPART (hour, (T2.time_out-T1.time_in)) *60) + DATEPART (minute, (T2.time_out-T1.time_in))) AS Minutes,
COUNT(DISTINCT T2.test_desc) AS Number_of_Process
FROM Results AS T1 JOIN Results AS T2 ON T1.lnumber = T2.lnumber
WHERE T2.test_desc = 'Shipping' AND T1.test_desc = 'Receiving'
I have an error message that says:
Msg 8120, Level 16, State 1, Line 3
Column 'Results.lnumber' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.
If I take this line out: COUNT(DISTINCT T2.test_desc) AS Number_of_Process
The query runs ok.
Also if I run [COUNT(DISTINCT T2.test_desc) AS Number_of_Process] in:
SELECT COUNT(DISTINCT T2.test_desc) AS Number_of_Process, T2.lnumber AS Lot_number
FROM Results AS T1 JOIN Results AS T2 ON T1.lnumber = T2.lnumber
GROUP BY T2.lnumber
It will also give me result.
Please help....
Thanks for your time
View 10 Replies
ADVERTISEMENT
Nov 26, 2007
Can anyone please tell me what is wrong with this query:
rsOtherSubCatagories.Source = "SELECT * FROM SubCatagories WHERE SubCatagoryID = " + Replace(rsSubCatagories__MMColParam, "'", "''") AND CatagoryID = " + Replace(rsOtherSubCatagories__MMColParam, "'", "''")
In DreamWeaver the bit in bold is greyed out, why?
rsOtherSubCatagories.Source = "SELECT * FROM SubCatagories WHERE SubCatagoryID = " + Replace(rsSubCatagories__MMColParam, "'", "''") AND CatagoryID = " + Replace(rsOtherSubCatagories__MMColParam, "'", "''")
Thanks Joe
View 2 Replies
View Related
Jan 4, 2005
I am attempting to count distinct orders and display by client for the preceding month. Below is my current query. It is providing inaccurate results. Could someone with a fresh look point out my error(s)?
SELECT
DISTINCT MtgeBroker,
COUNT(CreatedDate) AS [Title Orders for Current Month]
FROM RECalendar
WHERE
(
RECalendar.FileType IN ('COM','CONSTR','ConstrPerm','Constr Refi Table Fund','Conv Refi','FHA Refi','HELOC','Purchase 0 Loan','Purchase Loan','Purchase Cash','0 Is Not Closing','Witness')
AND
RECalendar.ModuleID IN ('594','603','675','814','815','816','817','818','819','820','821','822','823','824','825','826','827','828','829','830','831','832','833','834','887','888','889','890','891','892','893','894','895','896','897','898','899','900','901','902','903','904','905','906','907','908','909','910','911','912','913','914','915','974')
)
AND
(
MONTH(EventDateBegin)=MONTH(DATEADD(MM,-1,GETDATE()))
AND
YEAR(EventDateBegin)= YEAR(DATEADD(MM,-1,GETDATE()))
)
GROUP BY MtgeBroker
View 1 Replies
View Related
Mar 15, 2006
Hi all!
I am trying to set up a poll in ASP.NET 2.0, using SQL database. My
problem is that it won't update the database. This is what it looks
like:
(master)
<asp:radiobuttonlist id="vmpoll"
runat="server"
OnSelectedIndexChanged="poll_SelectedIndexChanged">
<asp:listitem>Object1</asp:listitem>
<asp:listitem>Object2</asp:listitem>
<asp:listitem>Object3</asp:listitem>
<asp:listitem>Object4</asp:listitem>
<asp:listitem>Object5</asp:listitem>
</asp:radiobuttonlist>
<br />
<asp:Button ID="btnPoll" runat="server" CommandName="update"
Text="Rösta" />
(master.cs)
protected void poll_SelectedIndexChanged(object sender, EventArgs e)
{
if (vmpoll.SelectedValue != "")
{
string ConnectionString =
System.Web.Configuration.WebConfigurationManager.ConnectionStrings["blogg"].ConnectionString;
SqlConnection con = new SqlConnection(ConnectionString);
string sql_update = "UPDATE poll SET votes = votes + 1 WHERE lagnamn =
'" + vmpoll.SelectedValue + "' LIMIT 1;";
Label1.Text = "Du har röstat på " + vmpoll.SelectedValue;
}
else
{
Label1.Text = "Inget värde valt";
}
}
Finally, the database has a table called poll, including the fields
int lagID Pk
string lagnamn
int votes
What happens if I push the Rösta(Vote)-button is that it properly displays the text in it's label, but
it won't update the database. I hope someone will see where I am going wrong here.
Thanks in advance!!
View 5 Replies
View Related
Apr 2, 2006
What is wrong with this query? How can may it work?
UPDATE T1 INNER JOIN T2 ON T1.cID = T2.cID SET T1.PSVP = T2.PSVP, T1.PSVR = T2.PSVR
WHERE (((T1.cID)=123))
View 1 Replies
View Related
Sep 2, 2006
I have a vb app that accesses a data base of participants who are in the db in primarily two tables, a "Roster" table and a "grades" table. This is designed to be able to track their grades from year-to-year. The "Roster" table has their first name, last name, and gender and the "Grade" table has a grade for them for each year that they have been in the database. Here is the problem that I have having:
If I have two different people with the same name and gender on the same team and I call them up to list them in a list box it shows the correct name(s) and grades (even if their grades are different) but shows the same unique id for both of them. It basically shows the id that is associated with the first of the two participants.
For instance, this code:
sql = "SELECT r.RosterID, r.FirstName, r.LastName, r.Gender, g.Grade" & sGradeYear & " FROM Roster r INNER JOIN Grades g "
sql = sql & "ON r.RosterID = g.RosterID WHERE r.TeamsID = " & lTeamID & " AND r.Archive = 'n' ORDER BY r.LastName, r.FirstName"
Set rs = conn.Execute(sql)
Do While Not rs.EOF
lstRoster.AddItem rs(0).Value & "-" & Replace(rs(2).Value, "''", "'") & ", " & rs(1).Value & " (" & rs(3).Value & ", " & rs(4).Value & ")"
rs.MoveNext
Loop
Set rs = Nothing
could show the following:
2441-John Doe (10)
2441-John Doe (11)
if there were two John Doe's on this team where one was in grade 11 and the other in grade 10. I assume there is something wrong with my join but it puzzles me that it lists both of them with the correct ages but only the first RosterID.
I appreciate any help you can give me!
Thanks~
View 1 Replies
View Related
Feb 5, 2004
select DATEPART(YEAR,DATE_CUST_INVOICE), PREPAID_COLLECT_FLAG, COUNT OF RECORDS
, SUM(inv_numb, freight_val)
FROM OPCSAHH
WHERE DATEPART(YEAR, DATE_CUST_INVOICE) > = '2000' AND
LESS THEN = 2003
AND PREPAID COLLECT FLAG = 'C'
What could be wron with this query. I must be overlooking something. I keep getting errors for the count of records, sum, and Less Then.
anyone know?
View 7 Replies
View Related
May 19, 2008
THe following query generates, Msg 156, Level 15, State 1, Line 2
Incorrect syntax near the keyword 'if'.
Msg 102, Level 15, State 1, Line 2
Incorrect syntax near ',' errors.
Can anyone tell me what I am missing?
EXECUTE sp_MSforeachtable '
select if(COL_LENGTH(''?'',''rn_create_user'') > 0, rn_create_user, rn_create_user)
from ? as o
where
not exists(select * from users u
where (u.users_id = o.rn_create_user)
)';
View 3 Replies
View Related
Mar 27, 2007
insert into o_country(cname) values(select cname from countries where cid=5)
o_country
----------
Cid int(primary key)
Cname varchar(50)
countries
----------
Cid int(primary key)
Cname varchar(50)
Malathi Rao
View 1 Replies
View Related
Jun 22, 2007
Dear experts,
please let me know where is the mistake in my query
select distinct (select COLUMN003 from TABLE021 where COLUMN001 = t.COLUMN001)
+ '(' +(select COLUMN002 from TABLE021 where COLUMN001 = t.COLUMN001)+ ')' as tablename
(select COLUMN003 from CATABLE009 where COLUMN001 = t.COLUMN003) modulename from TABLE022 t order by tablename
Vinod
Even you learn 1%, Learn it with 100% confidence.
View 4 Replies
View Related
May 24, 2006
Hi. I have a SP named, for instance, SP1.I need to execute something likeSELECT Sum([Field1]) FROM SP1 WHERE [SP1].[Field1]='0'and I get the message:Server: Msg 208, Level 16, State 3, Line 1Invalid object name 'SP1'.However, SP1 *IS THERE* and runs fine !!!ThanksAlex
View 4 Replies
View Related
Jul 20, 2005
For a given table, I want to know all the columns that are included inan index. I have looked on the web and come up with this, which seemsto work, but just wanted some verification. Are there any reasons whyI should be using the metadata functions like OBJECT_NAME?ThanksBruceSELECTDISTINCT c.namefrom sysusers u,sysobjects o,syscolumns c,sysindexes i,sysindexkeys kWHERE o.uid = u.uidAND u.name = userAND o.name = 'ing_customer'AND o.id = i.idAND i.indid = k.indidAND OBJECTPROPERTY( i.id, 'IsMSShipped' ) = 0AND 1 NOT IN ( INDEXPROPERTY( i.id , i.name , 'IsStatistics' ) ,INDEXPROPERTY( i.id , i.name , 'IsAutoStatistics' ) ,INDEXPROPERTY( i.id , i.name , 'IsHypothetical' ) )AND i.indid BETWEEN 1 And 250AND k.id = o.idand k.colid = c.colidand c.id = o.idORDER BY c.name
View 1 Replies
View Related
Mar 1, 2006
It can run in the sql server
select Id,Name from (select Id from TableB)
but it cannot run in the sql server mobile?
HOw do I ? Thank youï¼?
View 3 Replies
View Related
Mar 6, 2008
plz help all experts.
select a.service_num, a.cust_num
from
table1 a,
table2 b
where
a.service_num = b.service_num
and b.cust_num = b.cust_num
and datediff(day, a.compl_date, b.compl_date) between case when month(getdate()+7) - month(getdate()) != 0 then -7 and 7 else -30 and 30 end
and a.qty+b.qty=0
it gives me an error message as follow:
Server: Msg 156, Level 15, State 1, Line 8
Incorrect syntax near the keyword 'and'.
actually what i am trying to do is if the date of executing this query is the last week of each month, then the datediff between a.compl_date and b.compl_date is 30 days, if not then the datdiff is 7 days.
thanks in advance!
View 5 Replies
View Related
Jul 20, 2007
the error message shows it's now allow " =�!=�<�<=�>�>=" after sub query..
Select * From ZT_MediaImportLog Where isNumeric(ImportFileTime) = 1 And ImportFileTime < Convert(varchar(10),DateAdd(Month,-CAST (( select keepmonth from ZT_MediaImportLog, ZT_BillerChain a,ZT_BillerInfo b,ZT_Biller c,ZT_databackup d where a.BillerInfoCode = b.BillerInfoCode AND c.CompanyCode = d.Companycode AND ZT_MediaImportLog.Importsource = a.ChainCode ) AS int),GetDate()),112)
View 6 Replies
View Related
Sep 12, 2007
I keep getting the error "Invalid attempt to read when no data is present" when trying to query a table in my SQL DB. I have checked and rechecked and the table name and column names within it are spelled correctly. There are only three records in the database, they all have data in them, and the code in Country.Text precisely matches the data in the Country field in one of the records.
It's worth mentioning that when I use Visual Studio 2005's little direct SQL query tool to build and run the following SQL statement that it works properly:
SELECT Country, WordForStateFROM data_CountriesWHERE (Country = N'Jordan')
I am perplexed. Any ideas anybody...here is the code...?
Dim SelectSQL_Countries As String
SelectSQL_Countries = "SELECT * FROM data_Countries "
SelectSQL_Countries &= "WHERE Country='" & Country.Text & "'"Dim con_Countries As New SqlConnection(ConfigurationManager.ConnectionStrings("MySiteMainDB").ConnectionString)
Dim cmd_Countries As New SqlCommand(SelectSQL_Countries, con_Countries)Dim reader_Countries As SqlDataReader
Try
con_Countries.Open()
reader_Countries = cmd_Countries.ExecuteReader()StateID.Text = reader_Countries("WordForState")
reader_Countries.Close()Catch err As Exception
lblResults.Text = err.Message
Finally
con_Countries.Close()
End Try
View 3 Replies
View Related
Nov 8, 2007
1 SELECT
2 RowNumber,
3 'Source.Dbf, Plan.Dbf',
4 'Source Name is missing for Source Number "' + IsNull(RTrim(f.SOURCE_NUM),'Unknown') + '" in Plan.Dbf table.'
5 FROM
6 SourceDbf f
7 JOIN
8 (
9 SELECT DISTINCT
10 SOURCE_NUM,
11 (Select CASE s.SOURCE_NUMWhen 1 Then SRC1NAME
12 WHEN 2 Then SRC2NAME
13 WHEN 3 THEN SRC3NAME
14 WHEN 4 THEN SRC4NAME
15 WHEN 5 THEN SRC5NAME
16 WHEN 6 THEN SRC6NAME
17 WHEN 7 THEN SRC7NAME
18 WHEN 8 THEN SRC8NAME
19 WHEN 9 THEN SRC9NAME
20 WHEN 10 THEN SRC10NAME
21 WHEN 11 THEN SRC11NAME
22 WHEN 12 THEN SRC12NAME
23 WHEN 13 THEN SRC13NAME
24 WHEN 14 THEN SRC14NAME
25 WHEN 15 THEN SRC15NAME
26 END
27 FROM
28 PlanDBF p
29 Where
30 p.PLAN_NUM = s.PLAN_NUM
31 ) as SourceName
32 FROM
33 SourceDBF s ) c on f.PLAN_NUM = c.PLAN_NUM
i am getting an error on Line 33 and this what the error says...
Msg 207, Level 16, State 1, Line 33Invalid column name 'PLAN_NUM'.
Any help will appreciated..
Regards
Karen
View 17 Replies
View Related
Nov 20, 2007
I have tried running this query multiple times with no success I get the following errorIncorrect syntax near '('.I tried with quotes and without quotes around the 10 and also without the brackets around variable. It runs when an integer in entered in the variables place but that is not what I want. What am I doing wrong DECLARE @p AS intSET @p='10'SELECT TOP (@p)* FROM my_tbl order by newid()
View 3 Replies
View Related
May 19, 2008
strCommand = "SELECT * FROM tblevents WHERE startingDate=#"&startDate &"# AND eventtitle like '%"&criteria &"%' ORDER BY " &sSortSt I want to find any records that match a certain keyword on a specific date... But nothing comes up even though there is an event matching that criteria on the given date. Do I need brackets around my query or something?
View 6 Replies
View Related
Aug 1, 2004
What is the reason everything here executes except the very last "INSERT INTO forums_UsersInRoles VALUES ((@@identity),11) "?
IF I change the order of the last two queries it is the other one (now last) that is not executed. Is there a limit to how many you can run at a time?
strSQL = " BEGIN INSERT INTO forums_Users (UserName, Password, Email) VALUES ('" & request.form("UserName") & "','" & Request("UserPassword") & "','" & Request("UserEmail") & "'); INSERT INTO forums_UserProfile (UserID) VALUES (@@identity) ;INSERT INTO forums_UsersInRoles VALUES ((@@identity),11) END;"
Connect.Execute strSQL
View 4 Replies
View Related
Jul 15, 2002
Hi all,
As my user runs a query for her data, the query shows up with someone else's data. Can somebody tell me what happened and how o fix the problem. Thanks!
DangKhoa
View 4 Replies
View Related
Jun 24, 2004
Hi, I hope this is in the right forum!
I'm trying to do something extremely simple, but I keep getting this error:
Runtime error '3134' Syntax error in INSERT INTO statement
This is the code it complains about:
CurrentDb.Execute "Insert Into Speechfiles(FileName, SpeakerID,
SamplingRate,
DirectoryPathID,
Text,
CreationDate,
Duration,
Range)
values
(" & Chr(34) & fName & Chr(34) & ",
" & spkrID & ",
" & rate & ",
" & dirPathID & ",
" & Chr(34) & txt & Chr(34) & ",
" & Chr(34) & crdate & Chr(34) & ",
" & duration & ",
" & range & ")"
Since its so long, I've shown it as multiple lines, but in my code it is one long statement:
CurrentDb.Execute "Insert into Speechfiles(...) values (...)"
The table is called Speechfiles and the fields are as follows (types are in brackets)
FileName (text)
SpeakerID (number)
SamplingRate (number)
DirectoryPathID (number)
Text (text)
CreationDate (text) <- this isn't date format, so not the prob
Duration (number)
Range (number)
and the values I'm trying to insert are all of the same type as the fields are.... SOOOOOOOOOOOOOooooo, can anyone spot anything? I've spent way to long on this. All my other CurrentDb.Execute "Insert Into...." statements are working fine, it's just this one!
Thanks so much in advance...
View 3 Replies
View Related
Dec 6, 2005
select CAST(convert(char(10), convert(varchar(2),datepart(MM, getdate())) + '/1/' + convert(char(4),datepart(yyyy, getdate())), 101)AS datetime),
count(*)
from Participant_Status
--where date_in between (DATEADD(yy, DATEDIFF(yy,0,getdate()), 0)) AND (dateadd(mm, datediff(mm,0,getdate()), 0))
where date_in between (DATEADD(yy, DATEDIFF(yy,0,getdate()), 0)) AND DATEADD(day, -1, DATEADD(month, -1, DATEADD(dd,1-DAY(getdate()), getdate())))
group by CAST(convert(char(10), convert(varchar(2),datepart(MM, getdate())) + '/1/' + convert(char(4),datepart(yyyy, getdate())), 101)AS datetime)
Server: Msg 164, Level 15, State 1, Line 6
GROUP BY expressions must refer to column names that appear in the select list.
View 1 Replies
View Related
Aug 10, 2004
I am trying to sum a column together. This is what I am doing:
SELECT
sum(theoreticalTime= (Select
sum(rcp.theoreticalTime)
From
Traveler_X3 trv Join Recipe_X3 rcp On (trv.RecipeID = rcp.RecipeID)
Where
trv.Oper = rtsA.oper And
trv.RouteGroupID = (
Select
rgp.routeGroupID
From
Route_Group_X3 rgp
Where
rgp.routeGroupName = ( Select
rtl.RouteGroup
From
RouteList_X3 rtl
WHERE
rtl.route = rtsA.route
)
)
))
FROM
Routes_X3 rtsA
where
rtsA.route=( SELECT
lhm.route
FROM
brettb.pdash2.dbo.lothistorymoves lhm,
x3oprs x3o
WHERE
lhm.lot = 'S6D0IQ002A' AND
lhm.oper = x3o.oper AND
lhm.date_time = (SELECT max(date_time) FROM brettb.pdash2.dbo.lothistorymoves lhm, x3oprs x3o WHERE lhm.lot = 'S6D0IQ002A' AND lhm.oper = x3o.oper)
)
and rtsA.seq BETWEEN ( SELECT
seq
FROM
Routes_X3
WHERE
oper =( SELECT
lhm.oper
FROM
brettb.pdash2.dbo.lothistorymoves lhm
WHERE
lhm.lot ='S6D0IQ002A' AND
lhm.date_time = (SELECT max(date_time) FROM brettb.pdash2.dbo.lothistorymoves lhm WHERE lhm.lot = 'S6D0IQ002A')
)
and route=( select top 1
lhm.route
FROM
brettb.pdash2.dbo.lothistorymoves lhm,
x3oprs x3o
WHERE
lhm.lot = 'S6D0IQ002A' AND
lhm.oper = x3o.oper AND
lhm.date_time = (SELECT max(date_time) FROM brettb.pdash2.dbo.lothistorymoves lhm, x3oprs x3o WHERE lhm.lot ='S6D0IQ002A' AND lhm.oper = x3o.oper)
)
)+1 and 219;
What i got working was to put the query in a temp table called #temp1 and then run this:
select sum(theoreticalTime) from #temp1;
but isnt there a way to do this in one query?
Thank you for any help
View 1 Replies
View Related
Feb 14, 2007
DECLARE @Filter nvarchar(2048)
DECLARE @EventName nvarchar(2048)
DECLARE @Ticker nvarchar(2048)
DECLARE @Cusip nvarchar(2048)
SET @EventName = 'DIVIDEND'
SET @Ticker = 'IBM'
SET @Cusip = ''
SET @Filter = 'Name like ''' + @EventName + '%'' AND Ticker Like ''' + @Ticker + '%'' AND Cusip like ''' + @Cusip + '%'''
Select * from eventdatadetails
where @Filter
I want to execute the above SELECT statement and the filters in the where clause should come from the @Fitler variable... but query analyzer gives an error. If i replace the data in the @Filter with the variable in the query, everything works fine ...
View 4 Replies
View Related
Apr 19, 2006
By Database is heavily used , we use Transaction log backups ever 10 minuts, now someone fired a wrong query , that updated a particular table , the DB is still in use, there are some users working on it , I cant get the DB offline , what can I do to correct the mistake , please advice.
View 7 Replies
View Related
May 11, 2006
99pShop writes "I am trying to create a query to select all record for a specific 'PersonnelID'that have vacation booked in 2006 from a database.
I have written this query but it returns all PersonnelID that fit into the date block
requrirements
PersonnelID
select if DateStart falls within 2006
select if DateEnd falls within 2006
query i built:
Select * From tblResourceList Where PersonnelID=72
And tblResourceList.DateStart
Between '01 January 2006' And '31 December 2006'
Or tblResourceList.DateEnd Between '01 January 2006'
And '31 December 2006'
Or (tblResourceList.DateStart < '01 January 2006'
And tblResourceList.DateEnd > '31 December 2006')"
View 4 Replies
View Related
Apr 16, 2008
Hello,
i have a table EMP
EMPNO int Checked
ENAME nchar(10) Checked
JOB nchar(10) Checked
MGR varchar(50) Checked
HIREDATE nvarchar(50) Checked
SAL int Checked
COMM varchar(50) Checked
DEPTNO int Unchecked
Unchecked
Code Snippet
EMPNO
ENAME
JOB
MGR
HIREDATE
SAL
COMM
DEPTNO
7369
SMITH
CLERK
7902
17-Dec-80
800
20
7499
ALLEN
SALEMAN
7698
20-Feb-81
1600
300
30
7521
WARD
SALEMAN
7698
22-Feb-81
1250
500
30
7566
JONES
MANAGER
7839
2-Apr-81
2975
20
7654
MARTIN
SALESMAN
7698
28-Sep-81
1250
1400
30
7698
BLAKE
MANAGER
7839
1-May-81
2850
30
7782
CLARK
MANAGER
7839
9-Dec-82
2450
10
7788
SCOTT
ANALYST
7566
9-Dec-82
3000
20
7839
KING
PRESIDENT
17-Nov-81
5000
10
7844
TURNER
SALESMAN
7698
8-Sep-81
1500
0
30
7876
ADAMS
CLERK
7788
12-Jan-83
1100
20
7900
JAMES
CLERK
7698
3-Dec-81
950
30
7902
FORD
ANALYST
7566
3-Dec-81
3000
20
7934
MILLER
CLERK
7782
23-Jan-82
1300
10
After I execute the query
Code Snippet
select *
from emp
where( deptno=10
or comm is not null
or sal <= 2000
)
and deptno=20
I got
Code Snippet
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7369 SMITH CLERK 7902 17-Dec-80 800 20
7566 JONES MANAGER 7839 2-Apr-81 2975 20
7788 SCOTT ANALYST 7566 9-Dec-82 3000 20
7876 ADAMS CLERK 7788 12-Jan-83 1100 20
7902 FORD ANALYST 7566 3-Dec-81 3 000 20
Obviously, it is wrong with SAL.
Why?
Thanks
View 1 Replies
View Related
Apr 30, 2008
Here it is.
SELECT v.FirstName, v.LastName, v.Email, v.CompanyID, c.CompanyName, c.ParentCompanyName, v.ProgramID, v.ProgramName, COUNT(v.UserID)
AS 'NumOfSession'
FROM dbo.v_Report_SHW_ReportRecords_Users_Companies AS v INNER JOIN
dbo.v_Company AS c ON v.CompanyID = c.CompanyID
WHERE (CONVERT(datetime, CONVERT(varchar, v.DateCreated, 101), 101) BETWEEN '2008-01-01' AND '2008-03-31') GROUP BY v.FirstName, v.LastName, v.Email, v.CompanyID, c.CompanyName, c.ParentCompanyName, v.ProgramID, v.ProgramName
This is the error I get.
Msg 102, Level 15, State 1, Line 2
Incorrect syntax near ' '.
I know this is simple but for the life of me I can not see the problem.
Any help is great.
Thanks,
Jason
View 3 Replies
View Related
Nov 2, 2004
The query is (Select (25/20*100))
The wrong giving result is 100 it's should be 125
How I can use a query statement to get a correct result?
View 4 Replies
View Related
Oct 30, 2006
UPDATE CART SET TOTAL_COUNT = TOTAL_COUNT + 1, SET TOTAL_COUNT1 = TOTAL_COUNT1 + 1, SET DATE1 = 10/30/2006 6:17:02 PM, SET PERSON = luke WHERE CART_ID = 1
I have wacked my head over this query I dont see anything wrong with it
any ideas?
View 4 Replies
View Related
Jun 24, 2008
Hello all.
Ive got the following SQL query and i want to return only distinct [ReviewID]'s, however SQL Server is complaining about it. This is the query:
SELECT DISTINCT Top 5 [ReviewID],[ReviewType],[ReviewTypeName],[LoginID],[LoginForename],[LoginSurname],[Approved],[ReviewDate]
,[Stars],[RelatedProductID],[Title],[Copy],[Rating], [Image1], [Image1Width], [Image1Height], [Image1AltText], [Image2], [Image2Width], [Image2Height], [Image2AltText],
[CategoryL4]
FROM [feManagedReview]
This is whats its complaining about:
Msg 421, Level 16, State 1, Line 1
The text data type cannot be selected as DISTINCT because it is not comparable.
Msg 421, Level 16, State 1, Line 1
The text data type cannot be selected as DISTINCT because it is not comparable.
Msg 421, Level 16, State 1, Line 1
The text data type cannot be selected as DISTINCT because it is not comparable.
Any ideas where im going wrong?
View 4 Replies
View Related
May 16, 2008
USE GLPDEMO
GO
select t.name as TriggerName, ta.name as TableName, o.parent_obj
into GLPDemo.dbo.Temp_TablesAndTriggers
from sysobjects o inner join sys.triggers t
on t.object_id = o.id inner join syscomments c
on c.id = t.object_id inner join sys.tables ta
on ta.object_id = o.parent_obj
where xtype = 'tr' and c.text like '%Audit%'
DECLARE @DBTrigger as varchar(100), @DBTable as varchar(100), @exestr as varchar(100)
DECLARE TCursor CURSOR for
SELECT TriggerName, TableName from Temp_TablesAndTriggers
OPEN TCursor
FETCH NEXT FROM TCursor
INTO @DBTrigger, @DBTable
WHILE @@FETCH_STATUS = 0
select @exestr = ' DISABLE TRIGGER GLPDemo.dbo.' + @DBTrigger + ' ON GLPDemo.dbo.' + @DBTable
EXECUTE sp_executesql @exestr;
FETCH NEXT FROM TCursor
INTO @DBTrigger, @DBTable
CLOSE TCursor
DEALLOCATE TCursor
--DROP TABLE #Temp_TablesAndTriggers
View 4 Replies
View Related
