What Data Type Is Best For Hours
Feb 1, 2007What is the best data type to use when tracking hours, for example;
2.30 < this is stored in DB
(two hours and thirty minutes)
5.15 < this is stored in DB
(5 hours and fifteen minutes)
ADVERTISEMENT
Right Data Type To Store Hours And Minutes
Mar 1, 2007Hello friends
what is the right datatype to store the hours and minutes part in the database?
i found some info which says we have to convert the duration(hrs and min) into minutes and then store
is it the right approach?
Regards
Sara
Index Creation Causes Error The Conversion Of A Char Data Type To A Datetime Data Type Resulted...
Jul 23, 2005Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedSystem.Data.SqlClient.SqlException: The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value.
Dec 14, 2005After testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.
System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.
Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.
At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.
anyone having this problem before?? hopefully you guys can help.
Thanks,
Transact SQL :: To Display Days Hours Mins Format Based On Business Hours
Apr 22, 2015I want to display Days Hours Mins Format.
I am Having two columns Like below,
Col1 (in days) Â Â col2 (In Hours : Mins)
3days 4:5Â
In this first have to  add Col1 and Col2 (Here one day is equals to 9 hours ) so the addition is 31.5
From this 31.5 I should display 3 Days 4 Hours 30 Mins because 31.5 contains 3 (9 hours) days 4 Hours and .5 is equals to 30 mins.
Converting A Data Type Double To A Type Float Using A Data Adapter && SSCE 3.5
Feb 13, 2008Hi,
I can populate a dataTable with type double (C#) of say '1055.01' however when I save these to the CE3.5 database using a float(CE3.5) I lose the decimal portion. The 'offending' code is:
this.court0TableAdapter1.Update(this.mycourtsDataSet1.Court0);
this.mycourtsDataSet1.AcceptChanges();
this.court0TableAdapter1.Fill(this.mycourtsDataSet1.Court0);
This did not happen with VS2005/CE3.01.
I have tried changing all references to decimal (or money in CE3.5) without luck.
I'm beginning to think that string may be the way to go!!!!!!!
Can someone shed some light on my problem.
Thanks,
Later:
It's necessary to update the datatable adapter as the 3.01 and 3.5 CE are not compatible.
COnverting Numeric Data Type (Oracle) To Date Data Type Using SSIS
Mar 7, 2007We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.
I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.
On Error, If I fail the component, then the error is :
There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Regards
RH
Breaking Down Total Hours Worked Into Day And Evening Hours
Sep 21, 2006I have data coming from a telephony system that keeps track of when anemployee makes a phone call to conduct a survey and which project numberis being billed for the time the employee spends on that phone call in aMS SQL Server 2000 database (which I don't own).The data is being returned to me in a view (see DDL for w_HR_Call_Logbelow). I link to this view in MS access through ODBC to create alinked table. I have my own view in Access that converts the integernumbers for start and end date to Date/Time and inserts some otherinformation i need.This data is eventually going to be compared with data from someelectronic timesheets for purposes of comparing entered hours vs hoursactually spent on the telephone, and the people that will be viewing thedata need the total time on the telephone as wall as that total brokendown by day/evening and weekend. Getting weekend durations is easyenough (see SQL for qryTelephonyData below), but I was wondering ifanyone knew of efficient set-based methods for doing a day/eveningbreakdown of some duration given a start date and end date (with theday/evening boundary being 17:59:59)? My impression is that to do thiscorrectly (i.e., handle employees working in different time zones,adjusting for DST, and figuring out what the boundary is for switchingfrom evening back to day) will require procedural code (probably inVisual Basic or VBA).However, if there are set-based algorithms that can accomplish it inSQL, I'd like to explore those, as well. Can anyone give any pointers?Thanks.--DDL for view in MS SQL 2000 database:CREATE VIEW dbo.w_HR_Call_LogASSELECT TOP 100 PERCENT dbo.TRCUsers.WinsID, dbo.users.username ASInitials, dbo.billing.startdate, dbo.billing.startdate +dbo.billing.duration AS EndDate,dbo.billing.duration, dbo.projects.name ASPrjName, dbo.w_GetCallTrackProject6ID(dbo.projects.descript ion) AS ProjID6,dbo.w_GetCallTrackProject10ID(dbo.projects.descrip tion) AS ProjID10,dbo.billing.interactionidFROM dbo.projects INNER JOINdbo.projectsphone INNER JOINdbo.users INNER JOINdbo.TRCUsers ON dbo.users.userid =dbo.TRCUsers.UserID INNER JOINdbo.billing ON dbo.users.userid =dbo.billing.userid ON dbo.projectsphone.projectid =dbo.billing.projectid ONdbo.projects.projectid = dbo.projectsphone.projectidWHERE (dbo.billing.userid 0)ORDER BY dbo.billing.startdateI don't have acess to the tables, but the fields in the view comethrough as the following data types:WinsID - varchar(10)Initials - varchar(30)startdate - long integer (seconds since 1970-01-01 00:00:00)enddate - long integer (seconds since 1970-01-01 00:00:00)duration - long integer (enddate - startdate)ProjID10 - varchar(15)interactionid - varchar(255) (the identifier for this phone call)MS Access SQL statement for qryTelephonyData (based on the view,w_HR_Call_Log):SELECT dbo_w_HR_Call_Log.WinsID, dbo_w_HR_Call_Log.ProjID10,FORMAT(CDATE(DATEADD('s',startdate-(5*60*60),'01-01-197000:00:00')),"yyyy-mm-dd") AS HoursDate,CDATE(DATEADD('s',startdate-(5*60*60),'01-01-1970 00:00:00')) ASStartDT,CDATE(DATEADD('s',enddate-(5*60*60),'01-01-1970 00:00:00')) AS EndDT,DatePart('w',[StartDT]) AS StartDTDayOfWeek, Duration,IIf(StartDTDayOfWeek=1 Or StartDTDayOfWeek=7,Duration,0) ASWeekendSeconds,FROM dbo_w_HR_Call_LogWHERE WinsID<>'0'
View 3 Replies View RelatedConverting Decimal Hours To Hours And Minutes
May 13, 2008I have a float variable that holds a decimal number of hours.
So 1.5 equals 1 hour 30 minutes.
I need to change this to the format 1:30
Any idea how to do this?
The Conversion Of A Char Data Type To A Datetime Data Type!!
May 13, 2008hello all .. I have a form that includes two textboxes (Date and Version) .. When I try to insert the record I get the following error message .. seems that something wrong with my coversion (Data type)"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
in my SQL database I have the date feild as datetime and the version as nvarchar(max)
this is the code in the vb page .. Can you please tell me how to solve this problem?Imports System.Data.SqlClient
Imports system.web.configuration
Partial Class Admin_emag_insert
Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Record_DateTextBox.Text = DateTime.Now
End Sub
Protected Sub clearButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles clearButton.Click
Me.VersionTextBox.Text = ""
End Sub
Protected Sub addButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles addButton.Click
Dim objConnection As SqlConnection
Dim objDataCommand As SqlCommand
Dim ConnectionString As String
Dim record_date As Date
Dim version As String
Dim emagSQL As String
'save form values in variables
record_date = Record_DateTextBox.Text
version = VersionTextBox.Text
ConnectionString = WebConfigurationManager.ConnectionStrings("HRDBConnectionString").ConnectionString
'Create and open the connection
objConnection = New SqlConnection(ConnectionString)
objConnection.Open()
emagSQL = "Insert into E_Magazine (Record_Date, Version ) " & _
"values('" & record_date & "','" & version & "')"
'Create and execute the command
objDataCommand = New SqlCommand(emagSQL, objConnection)
objDataCommand.ExecuteNonQuery()
objConnection.Close()
AddMessage.Text = "A new emagazine was added successfully"
Me.VersionTextBox.Text = ""
End Sub
End Class
Converting Numeric Data Type To Text Data Type
Jul 20, 2005Hi,I would like to convert a dollar amount ($1,500) to represent Fifteenhundred dollars and 00/100 cents only for SQL reporting purposes. Isthis possible and can I incorporate the statement into an existingleft outer join query.Thanks in advance,Gavin
View 1 Replies View RelatedChanging User Defined Data Type's Data Type
Sep 12, 2006Hi,
I have a user defined data type which is called DEmployeeName,
it's length is varchar(20), how do i change it into varchar(30) without droping it?
I'm using SQL server 2005.
Thanks in advance..
Convert Text Data Type To Smalldatetime Data Type
Oct 9, 2007I have a field that is currently stored as the data type nvarchar(10), and all of the data in this field is in the format mm/dd/yyyy or NULL. I want to convert this field to the smalldatetime data type. Is this possible?
I've tried to use cast in the following way, (rsbirthday is the field name, panelists is the table), but to no avail.
SELECT rsbirthday CAST(rsbirthday AS smalldatetime)
FROM panelists
the error returned is "incorrect syntax near 'rsbirthday'.
I'm rather new to all things SQL, so I only have the vaguest idea of what I'm actually doing.
Thanks for the help!
Filter Data By Hours
May 22, 2008
Hello!
I need to create a report that shows daily events per hours, like this:
15.5. Example
00:00 8
01:00 9
02:00 34
Is this possible? The data should be filtered by the datetime. If the datetime is for example 15.5.2008 00:45, it goes to the first row of that example table I created.
Edit. I am using Sql server 2005.
Thanks,
Aleksi Rytkönen
Getting Error : : The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value
Jan 28, 2008update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
View 5 Replies View RelatedIssue Charting Data Over Last 24 Hours...
Sep 5, 2007I have a table which contains data regarding calls to the Help Desk, I want to chart this using a simple line chart in SSRS 2005 with the chart displaying the number of cases opened by the help desk each hour for the last 24 hours. Although our Help Desk provides 24/7 support, there are periods of an hour in which no calls are received. The issue I'm having is I want the chart to still display these hour periods of time even though there are no records created in the time span. I want the x-axis to display every hour for the last 24 hours.
Anyone have any suggestion on how I can accomplish this? The only idea I've come up with is creating a new table containing a list of every hour in a day and referencing this to build the x-axis...but it seems as though it should be easier than that?
Thanks in advance for any input or assistance.
Getting The Past 24 Hours Worth Of Data?
Aug 16, 2007I have a need to query my data and return only the last 24 hours (versus last day) worth of data.
My date and time fields are called:
calc_date = the date
Calc_time= the time
RealTime = Calc_date+Calc_time as realtime
I know if I use getdate()-1 that will get me the last day, but I need the last 24 hours. Any ideas on how would I do this?
Sqlbulkcopy Error : The Given Value Of Type SqlDecimal From The Data Source Cannot Be Converted To Type Decimal Of The Specified
Apr 16, 2008Hi,
The table in SQL has column Availability Decimal (8,8)
Code in c# using sqlbulkcopy trying to insert values like 0.0000, 0.9999, 29.999 into the field Availability
we tried the datatype float , but it is converting values to scientific expressions€¦(eg: 8E-05) and the values displayed in reports are scientifc expressions which is not expected
we need to store values as is
Error:
base {System.SystemException} = {"The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column."}
"System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.ArgumentException: Parameter value '1.0000' is out of range.
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
at System.Data.SqlClient.SqlBulkCopy.WriteToServerInternal()
at System.Data.SqlClient.SqlBulkCopy.WriteRowSourceToServer(Int32 columnCount)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table, DataRowState rowState)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table)
at MS.Internal.MS
COM.AggregateRealTimeDataToSQL.SqlHelper.InsertDataIntoAppServerAvailPerMinute(String data, String appName, Int32 dateID, Int32 timeID) in C:\VSTS\MXPS Shared Services\RealTimeMonitoring\AggregateRealTimeDataToSQL\SQLHelper.cs:line 269"
Code in C#
SqlBulkCopy bulkCopy = new SqlBulkCopy(sqlConnection, SqlBulkCopyOptions.Default);
DataRow dr;
DataTable dt = new DataTable();
DataColumn dc;
try
{
dc = dt.Columns.Add("Availability", typeof(decimal));
€¦.
dr["Availability"] = Convert.ToDecimal(s[2]); ------ I tried SqlDecimal
€¦€¦€¦.
}
bulkCopy.DestinationTableName = "dbo.[Tbl_Fact_App_Server_AvailPerMinute]";
bulkCopy.WriteToServer(dt);
thx
Bulk Insert Task Failing On Data Type Conversion For A Destination Column Of Type Bit
Jul 6, 2006I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package3.dtsx" finished: Failure.
The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value.
Apr 19, 2008Advance thanks ....... My table is TimeSheet:----------------------------------- CREATE TABLE [dbo].[TimeSheet]( [autoid] [int] IDENTITY(1,1) NOT NULL, [UserId] [int] NOT NULL, [starttime] [datetime] NOT NULL, [endtime] [datetime] NOT NULL, [summary] [nvarchar](50) NOT NULL, [description] [nvarchar](50) NULL, [dtOfEntry] [datetime] NOT NULL, [Cancelled] [bit] NULL) ON [PRIMARY] My Query is------------------ insert into timesheet (UserId, StartTime,EndTime, Summary, Description,DtOfEntry) values (2, '19/04/2008 2:05:06 PM', '19/04/2008 2:05:06 PM', '66', '6666','19/04/2008 2:05:06 PM')i m not able to insert value Error Message is-------------------------Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated. can any body give any solution
View 5 Replies View RelatedThe Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value.
Aug 3, 2005Hey, I have a big problem that i wanna search data from SQL by DateTime like thatselect * from test where recorddate='MyVariableWhichHoldDate'i use variable that holds Date info.i searched a lot infomation on net but there is no perfect solution. i know why this occur but there is no function to solve this problem. i used a lot of ways. it accept yyyy-mm-dd format but my variable format is dd-mm-yyyyy . is there any function for this problem? and any other solution.thanks for ur attentionregards
View 6 Replies View RelatedThe Conversion Of Char Data Type To Smalldatetime Data Type Resulted In An Out-of-range Smalldatetime Value
Mar 30, 2007 I am using Visual Studio 2005 and SQL Express 2005. The database was converted from MS Access 2003 to SQL Express by using the upsize wizard.
I would like to store the current date & time in a column in a table. This column is a smalldatetime column called 'lastlogin'.
The code I'm using is:
Dim sqlcommand As New SqlCommand _
("UPDATE tableXYZ SET Loggedin = 'True', LastLogin = GetDate() WHERE employeeID = '" & intEmployeeID.ToString & "'", conn)
Try
conn.Open()
sqlcommand.ExecuteNonQuery()
conn.Close()
Catch ex As Exception
MessageBox.Show(ex.Message)
End Try
This code works fine on my local machine and local SQL server. However at the client side this code results in the error as mentioned in the subject of this thread. I first used 'datetime.now' instead of 'getdate()', but that caused the same error. Then I changed the code to 'getdate()', but the error still remains.
The server at the client is running Windows Server 2000 UK . My local machiine is running WIndows XP Dutch.
Maybe the conversion from Dutch to UK has something to do with it. But this should be solved by using the 'Getdate()' function..... ?
Not Last 24 Hours Data But Yesterday Data
Dec 26, 2007How do I write an expression which shows only previous day data. I use the following where condition .
(DATEDIFF(dd, 0,MoneyFlowTransaction.ProcessedTime) = DATEDIFF(dd, 0, GETDATE()) - 1)
I'm wondering whether this one shows yesterday data or last 24 hours data?
Thanks
P/S;
Also for my reports I used the following query.
Code Block
SELECT ProcessedTime, GETDATE() - 1 AS Yesterday, GETDATE() - 2 AS DaybfYesterday
FROM MoneyFlowTransaction
This shows data before 24 hours. Not exactly yesterday data(calander date).
can any one help me to fix this pls?
Connection Type Limitations When Using XML Data Type In SQL Task
Jul 23, 2007I'm trying to use the SSIS Execute SQL Task to pull XML from a SQL 2005 database table. The SQL is of the following form:
SELECT
(
SELECT
MT.MessageId 'MessageId',
MT.MessageType 'MessageType',
FROM MessageTable MT
ORDER BY MT.messageid desc
FOR XML PATH('MessageStatus'), TYPE
)
FOR XML PATH('Report'), TYPE
For some reason I can only get this query to work if I use an ADO.NET connection type. If I try to use something like the OLEDB connection I get the following error:
<ROOT><?MSSQLError HResult="0x80004005" Source="Microsoft XML Extensions to SQL Server" Description="No description provided"?></ROOT>
Can anyone tell me why the SELECT ... FOR XML PATH... seems only to work with ADO.NET connections?
Thanks
Walter
Import Data From Textfile Evry 2 Hours Automtically
Feb 23, 2001Hello,
Can somebody please help me with the following problem.
I want to import data from a textfile called "Links.txt" into a SQL-server database called "LinkData". The data in this textfile is separated by pipelines. And this import should be done every 2 hours automatically. How can I make a proces or something in SQL server 7 that will fill the database with the data out of this textfile every 2 hours. Please help me. I really don't know.
greetings
R. Jacobs
Import Data From Textfile Evry 2 Hours Automtically WITH DTS
Feb 23, 2001I want to import data from a textfile called "Links.txt" into a SQL-server database called "LinkData". The data in this textfile is separated by pipelines. And this import should be done every 2 hours automatically. How can I make a proces or something in SQL server 7 that will fill the database with the data out of this textfile every 2 hours. Please help me. I really don't know.
I was planning on using DTS for this Only I really don't know how. I tried it with "Data driven query task" in combination with "Text file (source)" and "Microsoft OLE DB Provider for SQL Server". But when I run it, it gives an error. What am i doing wrong??? Help me please
thanx
Nvarchar Fields With Time Data - Calculate Difference In Hours
Sep 19, 2014I have two nvarchar fields with time data 12:34:34 and the second one 12:34 I want to calculate the difference in Hours. The first field is called (OTIM) the second field is called (ReportedTime) if the name matters. I tried substring to trim the OTIM, I am unable to make it work.
View 3 Replies View RelatedSqlDataSource.Select Error: Unable To Cast Object Of Type 'System.Data.DataView' To Type 'System.String'.
Oct 19, 2006I am trying to put the data from a field in my database into a row in a table using the SQLDataSource.Select statement. I am using the following code: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'" myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)But when I run the code, I get the following error:Server Error in '/YorZap' Application. Unable to cast object of type 'System.Data.DataView' to type 'System.String'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.Source Error: Line 54: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'"
Line 55: 'myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments).GetEnumerator.Current, String)
Line 56: myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)
Line 57:
Line 58: filesTable.Rows.Add(myDataRow)Source File: D:YorZapdir_list_sort.aspx Line: 56 Stack Trace: [InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.]
ASP.dir_list_sort_aspx.BindFileDataToGrid(String strSortField) in D:YorZapdir_list_sort.aspx:56
ASP.dir_list_sort_aspx.Page_Load(Object sender, EventArgs e) in D:YorZapdir_list_sort.aspx:7
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +13
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +45
System.Web.UI.Control.OnLoad(EventArgs e) +80
System.Web.UI.Control.LoadRecursive() +49
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3743
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210 Please help me!
Unable To Cast COM Object Of Type 'System.__ComObject' To Class Type 'System.Data.SqlClient.SqlConn
May 17, 2006Dear all,
I am stuck with a SSIS package and I can€™t work out. Let me know what steps are the correct in order to solve this.
At first I have just a Flat File Source and then Script Component, nothing else.
Error:
[Script Component [516]] Error: System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to class type 'System.Data.SqlClient.SqlConnection'. Instances of types that represent COM components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface. at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction)
Script Code (from Script Component):
' Microsoft SQL Server Integration Services user script component
' This is your new script component in Microsoft Visual Basic .NET
' ScriptMain is the entrypoint class for script components
Imports System
Imports System.Data.SqlClient
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Public Class ScriptMain
Inherits UserComponent
Dim nDTS As IDTSConnectionManager90
Dim sqlConnecta As SqlConnection
Dim sqlComm As SqlCommand
Dim sqlParam As SqlParameter
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Dim valorColumna As String
Dim valorColumna10 As Double
valorColumna = Row.Column9.Substring(1, 1)
If valorColumna = "N" Then
valorColumna10 = -1 * CDbl(Row.Column10 / 100)
Else
valorColumna10 = CDbl(Row.Column10 / 100)
End If
Me.Output0Buffer.PORCRETEN = CDbl(Row.Column11 / 100)
Me.Output0Buffer.IMPRETEN = CDbl(Row.Column12 / 100)
Me.Output0Buffer.EJERCICIO = CInt(Row.Column2)
Me.Output0Buffer.CODPROV = CInt(Row.Column7)
Me.Output0Buffer.MODALIDAD = CInt(Row.Column8)
Me.Output0Buffer.NIFPERC = CStr(Row.Column3)
Me.Output0Buffer.NIFREP = CStr(Row.Column4)
Me.Output0Buffer.NOMBRE = CStr(Row.Column6)
Me.Output0Buffer.EJERDEV = CDbl(Row.Column13)
With sqlComm
.Parameters("@Ejercicio").Value = CInt(Row.Column2)
.Parameters("@NIFPerc").Value = CStr(Row.Column3)
.Parameters("@NIFReP").Value = CStr(Row.Column4)
.Parameters("@Nombre").Value = CStr(Row.Column6)
.Parameters("@CodProv").Value = CInt(Row.Column7)
.Parameters("@Modalidad").Value = CInt(Row.Column8)
.Parameters("@ImpBase").Value = valorColumna10
.Parameters("@PorcReten").Value = CDbl(Row.Column11 / 100)
.Parameters("@ImpReten").Value = CDbl(Row.Column12 / 100)
.Parameters("@EjerDev").Value = CDbl(Row.Column13)
.ExecuteNonQuery()
End With
End Sub
Public Overrides Sub AcquireConnections(ByVal Transaction As Object)
Dim nDTS As IDTSConnectionManager90 = Me.Connections.TablaMODELO80
sqlConnecta = CType(nDTS.AcquireConnection(Nothing), SqlConnection)
End Sub
Public Overrides Sub PreExecute()
sqlComm = New SqlCommand("INSERT INTO hac_modelo180(Ejercicio,NIFPerc,NIFReP,Nombre,CodProv,Modalidad,ImpBase,PorcReten,ImpReten,EjerDev) " & _
"VALUES(@Ejercicio,@NIFPerc,@NIFReP,@Nombre,@CodProv,@Modalidad,@ImpBase,@PorcReten,@ImpReten,@EjerDev)", sqlConnecta)
sqlParam = New SqlParameter("@Ejercicio", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFPerc", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFReP", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Nombre", Data.SqlDbType.VarChar)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@CodProv", Data.SqlDbType.TinyInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Modalidad", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpBase", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@PorcReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@EjerDev", Data.SqlDbType.Decimal)
sqlComm.Parameters.Add(sqlParam)
End Sub
Public Sub New()
End Sub
Public Overrides Sub ReleaseConnections()
nDts.ReleaseConnection(sqlConnecta)
End Sub
Protected Overrides Sub Finalize()
MyBase.Finalize()
End Sub
End Class
Thanks a lot for your help
@PARAM1 : Unable To Cast Object Of Type 'System.Data.SqlTypes.SqlInt32 To Type System.IConvertable
Apr 23, 2007I get the following message in the vs2005 querybuilder when i do a preview:
***********************************
SQL Execution Error.
Executed SQL statement: SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = @PARAM1)
Error Source: SQL Server Compact Edition ADO.NET Data Provider
Error Message: @PARAM1 : Unable to cast object of type 'System.Data.SqlTypes.SqlInt32 to type System.IConvertable'.
****************************************
The same querypreview works fine without the parameter:
SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = 186)
Can anybody tell me why this is?
And tell me a way to get the tableadapter working?
Anne-Jan Tuinstra
How To Convert To Regular Text, Data Stored In Image Data Type Field ????
Jul 20, 2005Hi,This is driving me nuts, I have a table that stores notes regarding anoperation in an IMAGE data type field in MS SQL Server 2000.I can read and write no problem using Access using the StrConv function andI can Update the field correctly in T-SQL using:DECLARE @ptrval varbinary(16)SELECT @ptrval = TEXTPTR(BITS_data)FROM mytable_BINARY WHERE ID = 'RB215'WRITETEXT OPERATION_BINARY.BITS @ptrval 'My notes for this operation'However, I just can not seem to be able to convert back to text theinformation once it is stored using T-SQL.My selects keep returning bin data.How to do this! Thanks for your help.SD
View 1 Replies View RelatedData Access :: Arithmetic Overflow Error Converting Expression To Data Type Int
Jul 24, 2015When I execute the below stored procedure I get the error that "Arithmetic overflow error converting expression to data type int".
USE [FileSharing]
GO
/****** Object: StoredProcedure [dbo].[xlaAFSsp_reports] Script Date: 24.07.2015 17:04:10 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
[Code] .....
Msg 8115, Level 16, State 2, Procedure xlaAFSsp_reports, Line 25
Arithmetic overflow error converting expression to data type int.
The statement has been terminated.
(1 row(s) affected)
Mapping Of SQL Server Data Types To Integration Services Data Type
Oct 14, 2005Does anyone know of any cross-references between SQL Server data types and the new data types introduced with SQL Server Integration Services?
View 6 Replies View Related