What Is Diffecence Indexes, Primary Key And Identity.
Mar 12, 2007What is diffecence indexes, primary key and identity.
View 1 Replies
ADVERTISEMENT
Creating Primary Key And Indexes
Aug 19, 2002Thanks to help from Ray Maio I have been able to create copies of various tables using the Select Into command.
Ray also responded that this command does does not transfer Primary Key and Index information.
I have attempted to create an index by using the following statement:
create nonclustered index SchoolIndx on wrestlerstest (School)
I did not get an error, but can't tell ift the index was created. The question is, how do I find out if
there is an index for the column School? Is there a command that will tell me. I'm just sending commands
to the server via a short .asp program and don't really know how to obtain a message back. Could I find the information
by browsing the
Thanks again in advance,
Greg Zafros
Indexes In Primary Keys
May 6, 2005I have a 3rd party app which had a primary key with about 5 fields. The last field of this was a trantype. This app had a posting process which uses this in it's sql. Ran rather slow. We added an individual index to this field and cut processing down 90%. It almost seemded like sl server was ignoring this index. Is this because it was the last field in the primary key index?
View 1 Replies View RelatedIdentity Column And Indexes
Sep 21, 1999The largest table in the database is not referenced by any other table. Primary key is identity column. I know that I shouldn’t make clustered index on that column, but what if I don’t index that column at all? Will it be some negative consequences of that decision?
View 2 Replies View RelatedClustered Indexes On Primary Keys
Aug 18, 2006All of the 3 books I've read say it is not a good idea to create a clustered index on the primary key but it is created as the default. My question is has this changed in 2005? My understanding is to create the clustered index on columns used first in join clauses and then in where clauses, what is the answer?
View 14 Replies View RelatedUnique Colm Indexes And Primary Keys
Jan 25, 2006I have a deal table, each of these investments must be unique. I created a int pk : idDeal. Does that make sense or should i just use the deal colm being it has a unique constraint,
Reguarding indexes, should i make the auto # colm my pk and make that the clustered index? and put another index on the Deal Colmn? Any suggestions welcomed
Thank you
DB Design :: Need To Recreate All Indexes From Primary To Secondary File Group
Jul 14, 2015I have a database around 500 GB. right now the database have only one data file and one log, it has only one filegroup also.all the indexes and table are placed in Primary Filegroup . we are going to separate them. the planing is to move all the indexes to Secondary filegroup and all the table will be in Primary filegroup.But there will be a problem while implementing it because there are around 600 tables and each table have at least 2 non-clustered index , so is there any way to move all the index to Secondary Filegroup.
View 3 Replies View RelatedTransact SQL :: Find Column ADRSCODE Used In Indexes Or Primary Keys?
Oct 12, 2015I wanted to find all occurrences of ADRSCODE in a Database where ADRSCODE is in either an Index or a Primary Key.
I know how to get all of the occurences of ADRSCODE in a database and the table associated with it, I just want to tack on the Index and/or primary key.
SELECTOBJECT_NAME(object_id)FROMsys.columns
WHEREname
='foo'
How can I get the other bit of information ?
Identity And Primary Key
Nov 15, 2004I confuse about Identity and primary key, what is the different between them. One table can have no primary key. Right? Thanks.
View 14 Replies View RelatedPrimary Key And Identity
Feb 1, 2006Can someone tell me the difference between making a column primary key column vs. making it identity column?
thanks
Primary Key Vs Identity Column
Jan 22, 2007What is the different between Primary key and Identity Column? and when should I them?
(Im just a beginner with databases...)
URGENT!!! Primary Key As Identity
Mar 17, 2007I orginally had my project ID specified as an Int and the properties set as identity specification that would automatically fill in the ID field however I have now changed it as the ID needs to be specified by the user but now when i update a project the ID isnt seen as the identity so whatever i do affects other records not just the one i select.
it is now defined as an nvarchar but i dont know how to set that as the identity so that each record can be edited seperately, can someone please help this is really urgent!!
Im using visual web developer express with sql server, please please help!
Setting Identity, Primary Key
Jan 21, 2008I want to crete temporary table with this coammnd "CREATE TABLE Temp (ID int, name varchar(50))". I would like to know which command is used for setting primary key and identity on ID field. Thankyou in advance.
View 2 Replies View RelatedHelp Needed With Primary Key And Identity
Jan 8, 2004I have some code in my ASP.NET page which uses a SQL 2000 Database that was created before creating the ASP Page. The problem I'm having is using an insert statement such as the following example from the DATAGRID example on the Matrix Product. I want the option to create new rows but my Primary Key doesn't allow Nulls and when I hard code a number in the first field of my table for my ID...it's not automatically generated. I've looked through this forum but I'm having some problems understanding what others have done with Identity or GUID's...etc....:
Sub AddNew_Click(Sender As Object, E As EventArgs)
' add a new row to the end of the data, and set editing mode 'on'
CheckIsEditing("")
If Not isEditing = True Then
' set the flag so we know to do an insert at Update time
AddingNew = True
' add new row to the end of the dataset after binding
' first get the data
Dim myConnection As New SqlConnection(ConnectionString)
Dim myCommand As New SqlDataAdapter(SelectCommand, myConnection)
Dim ds As New DataSet()
myCommand.Fill(ds)
' add a new blank row to the end of the data
Dim rowValues As Object() = {"", "", ""}
ds.Tables(0).Rows.Add(rowValues)
' figure out the EditItemIndex, last record on last page
Dim recordCount As Integer = ds.Tables(0).Rows.Count
If recordCount > 1 Then
recordCount -= 1
DataGrid1.CurrentPageIndex = recordCount DataGrid1.PageSize
DataGrid1.EditItemIndex = recordCount Mod DataGrid1.PageSize
End If
' databind
DataGrid1.DataSource = ds
DataGrid1.DataBind()
End If
End Sub
Primary Key VS Identity Column
Apr 5, 2000Can anyone explain the Difference between Primary Key and Identity Column in MSSQL Server 6.5. Please give me any example if possible.
Thanks for Help!!!!
How To Update None Identity Primary Key Value
Aug 29, 2014I am working on a project to consolidate 3 distinct buildings name code(6 digit character called BUILDING_CODE Primary Key) into one building code. This is an effort to merge/move everyone who is currently coded under the three building codes into one building code. We currently have this column defined on 5 tables as primary key (none identity) in SQL Server 2005.
Out of the five tables one has two store procedure dependencies.
What would be the best practice to update the six digit BULDING_CODE column Primary Key value without causing any issues?
Using An Identity Field As Primary Key
Jul 20, 2005I want to use the Identity field (increment 1,1) as a primary key andhave a unique constraint on my other field which is of type char.I am worried that related data in other tables may lose referntialintegrity if records in the ID table get messed up and need to bere-entered.Can you please advice on best way to do this. I definitely need anumeric id field because it makes the joins and queries so muchfaster.
View 9 Replies View RelatedUsing Identity To Generate A Primary Key
Jul 20, 2005We are converting a legacy visual foxpro system to use a SQL back-end.A number of (existing DBF) tables currently have a zero-filled primarykey eg. '000255' which is just an auto-incrementing key - but alwaysstored as a char field with leading zeros.For backward compatibility we are considering retaining this primarykey and using an identity field to auto-generate the next value, thenconvert the new identity value into the new primary key. So ifidentity is 256 then the key field will be assigned '000256'.Now the problem with this is that the primary key must be non-null andunique so must be given a value in the INSERT statement. But, theidentity value isn't available (I presume) until after the INSERTstatement has executed.Is this a "don't go there" kind of problem?ThanksAndrew GrandisonSA Department of HealthAdelaide, South Australia
View 2 Replies View RelatedSSIS 2000 To 2005 Database Transfer Lost All Primary Keys, Identities And Indexes
Mar 25, 2008Hi everyone, I am trying to upgrade a 2000 DB to 2005 with SSIS Database Transfer.
I finally got it to work with an online transfer but the destination database has no primary keys, indexes or identity columns from the source DB.
What am I missing?
What other ways are there to upgrade a SS2000 DB to 2005?
Thank you.
Designating An Identity Column When You Already Have Primary Key
Jan 13, 2007Hello --
Following normal practice, I have an autoincrementing identity column designated as primary key in my table. I have two other columns that should also contain unique values per record, but the Identity option is greyed out (in Management Studio) for all columns other than the primary key.
I'm enforcing this programmatically (in my C# code) at this point, but I'd like to back that up with a constraint in the database itself.
Any help is appreciated.
Eric
How To Insert Primary Keys Without Using Identity
Nov 17, 2003I have the following issue
- my database consists of tables with one ID field as primary key.
for each INSERT the 'next' value from this ID field is extracted
from a table called TableList.
- this works perfectly fine, as long as I insert one record at a time:
but now I would like to run a command such as
INSERT INTO dest (name)
SELECT name
FROM src
i.e. without being able to specify the ID value.
Has anybody implemented this
(i would prefer not to use identity columns or use cursors),
possible with triggers?
thanks for your time,
Andre
Identity Fields As Primary Key In Server 7.0
May 13, 1999Most of the tables in my database are implemented with IDENTITY columns as the primary key.
When an INSERT from my application is attempted, sometimes I get an error returned stating that insert
cannot be done because of duplicate key value. If I try the INSERT again, sometimes it works(??). Of course,
DBCC CHECKIDENT resets the identity value if trying the INSERT again doesn't work. Then sometime a little later, the problem happens again.
Is there anything I can do other than placing into my application code the execution of dbcc checkident
anytime I want to do an insert to prevent the error? By the way, DBCC CHECKDB revealed no problems.
HELP!
Trying To Find Non Identity Primary Keys
Jan 26, 2006This ain't working
SELECT T.TABLE_NAME,C.COLUMN_NAME
FROM INFORMATION_SCHEMA.TABLES T
JOIN INFORMATION_SCHEMA.COLUMNS C
ON T.TABLE_NAME = C.TABLE_NAME
WHERE OBJECTPROPERTY(OBJECT_ID(T.TABLE_NAME),
'TableHasIdentity') = 0
AND T.TABLE_TYPE = 'BASE TABLE'
AND OBJECTPROPERTY(OBJECT_ID(C.COLUMN_NAME),'IsPrimary Key') = 1
ORDER BY T.TABLE_NAME,C.COLUMN_NAME
This is giving me bogus results...
SELECT * FROM INFORMATION_SCHEMA.COLUMNS
WHERE OBJECTPROPERTY(OBJECT_ID(COLUMN_NAME),'IsPrimaryKe y') = 1
I have PK's all over the place. What gives? Too many cocktails with lunch?
SQL Server 2014 :: Get Next Primary Key Without Identity
Jul 31, 2014I have a table to store int primary keys. Where the value nextID is the value to use.I need to get the value and update it (nextID + 1) before the next person gets it.I thought using tran would work but it doesn't stop a select.How do I get a value (lock the table for the update), update the table (preventing any selects until done) and release the table.
BEGIN TRAN
UPDATE TableIds
SET NextId = NextId + 1
WHERE TableName = 'Users'
WAITFOR DELAY '00:00:20'
SELECT NextId
FROM TableIds
WHERE TableName = 'Users'
COMMIT TRAN
I really want to do this in the reverse order but it doesn't work. But if I do this and have another query to just do a select:
SELECT NextId
FROM TableIds
WHERE TableName = 'Users'
This query never returns. Doesn't the COMMIT TRAN release the lock on the table?
Identity Column Primary Key Vs Custom Key
May 22, 2008We are developing a batabase which is meant for financial domain,so it will import data from different source system..
and data from our data base will be further passed to other applications.
In contex of our system integration with other data sources ,whether is it a good idea to have a auto integer primary key a or to implement some logic to generate primary key?
Can some one guide us to some pratical data base design case studies?or some best practices.?
Primary Key, Identity, Integrity Constraints
Dec 22, 2006Hi,
We will be using SQL Compact Edition in our application. We are doing some tests to make sure that SQL Compact is suitable for our requirments.
Our problem is with Primary keys and how to maintain data integrity since we will have 100+ clients inserting, updating, and synchronizing with SQL Server.
Can we control Identity range?
Shall we use UniqueIdentifires insted of int?
How can we detect errors at the client side? (For example, if two clients are trying to synchronize 2 columns with the same primary key value)
We will use Merge replication.
Thank you
Missing Identity Values In Primary Keys
May 29, 2012We are facing the following issue, several machines/users that are executing very often a command similar to :
INSERT INTO TableName (FieldOne,FieldTwo) VALUES ('ValueOne','ValueTwo');
SELECT SCOPE_IDENTITY() AS Table_ID;
Where TableName has a primary key defined as identity(1,1).and that Table_ID is being used as reference in others tables
These queries are executed using different dababase users and among several diffrent apps..The Problem is that we are detecting lost block of "Table_ID's" as the other tables shows the InsertedID as a reference, but the TableName table lacks of this ID record. In other words, the INSERT seems to work, the SCOPE_Identity returns an InsertedID, and the other tables are populated using this number. However, when we query the TableName table the mentioned record does not exist. We are profiling the server and we're sure that there are no DELETE statement on the TableName table. This seems to be happening when the are either deadlocks or blocked processes. Whenever the deadlocks and locks disappear/solved, everything works as expected.why the Scope_Identity returns the Inserted ID if the INSERT action had failed.
SQL Server 2012 :: Primary Key And Identity Columns
May 23, 2015Can a Primary Key column also be a Identity column? The reason I am asking this question is because I have created a table and each time I insert data into the Address Table I am also inserting the AddressID, how do I get the Primary Key (AddressID column) to self generate ID values.
View 9 Replies View RelatedIdentity Primary Field In Merge Replication
Jul 23, 2007Hello I currently have a merge replication set up with 4 subscribers. A primary field for one of my tables is set to a integer indetity.
What Ive noticed is that depending on which database I enter data into, the indentity field (primary key) is set within a certain range I.e
On Server 1 - Values start from 1 then 2,3,4 etc etc
Server 2 - 24001, 24002, 24003 etc etc
Server 3 - 46001, 46002, 46003 etc etc
Server 4 - 68001, 68002, 68003
My question is what happens when these ranges eventually conflict? Do they automatically gain a different range such as 142 001, 142 002 etc etc?
Ive tried looking in SQL Help, and a quick search here, Im just after some confirmation before I implement this to my app.
cheers
How To Find All Tables That Have An Identity Column As A Primary Key
Mar 6, 2008How do i find all the tables that have an Identity Column as a primary key in a database. Thanks.
View 8 Replies View RelatedPrimary/Foreign/Identity Keys && Encryption
Nov 2, 2006Hi all!
I'm just getting my feet wet with how encryption works in SQL 2005. With regards to the encryption of primary / foreign keys, I'm not entirely clear on the best approach. Below are three examples of typical table structures I currently have:
== Customers table ==
CustomerID (PK, int, Identity)
CustomerName (varchar)
== Orders table ==
OrderID (PK, int, Identity)
CustomerID (int, foreign key)
CreditCardNumber (varchar)
== OrderDetails table (1 to Many) ==
OrderID (PK/FK, int)
ItemNumber (PK, int)
ItemDescription (varchar)
The Customers and Orders tables use identity values as their primary keys. From what I can tell, CustomerID in the Customers table cannot be encrypted and OrderID in the Orders table cannot be encrypted because they are identity values. In these cases, would it be safer (in terms of security) to create a separate, meaningless identity key column in the Customers table and then remove the identity attribute from CustomerID so I can encrypt CustomerID?
Similarily in the OrderDetails table, OrderID and ItemNumber form a composite key. These values are important in that I don't want them to be tampered with. Am I better off creating a separate identity key column which becomes the table's primary key ... then encrypt both the OrderID and ItemNumber columns in this table?
Any ideas are appreciated.
Thank you,
Ben
DB Design :: Add A New Int Identity Column As Primary Key To Already Existing Table
Sep 3, 2015We want to add a new int identity column as a primary key to an already existing table that has a primary key on Guid. Here is the DDL:
CREATE TABLE [dbo].[VRes](
[VResID] [uniqueidentifier] NOT NULL,
[Mes] [varchar](max) NOT NULL,
[PID] [uniqueidentifier] NOT NULL,
[Segt] [int] NOT NULL,
[code]....
Also we currently have 3 million rows on this table. Is having an integer column as identity column and primary key better or shd I consider using BigInt?
How To Set The Identity Specification For A Primary Key Using A Script, Instead Of SQL Server Management Studio?
May 7, 2008If I right click on a primary key in SQL Server management studion, I can set the identity specification for a primary keyId so that it is indexible. I do this by setting the properties for "Is Identity", "Identity Increment", and "Identity Seed". This is wonderful, but I have been asked to perform this using a script instead of the SQL server GUI/Sql Server management studio. Is this possible? Does anyone know how to do this? If so, can you show me how?
Ralph