Hi,
I've found a two different answers for this question:
one - on the http://support.microsoft.com/Default.aspx?kbid=920700 site where on the Performance improvements section there is a 128MB value in the Database size.
other is in the product datasheet there is a information that this version supports databases up to 4 GB.
Could you tell me what is the correct answer?
Regards,
Mariouche
I posted this in another area and didn't get an answer, so maybe I posted it in the wrong place. Forgive me if you've seen this twice.
I'm trying to figure out what the ultimate size limitation for a SQL 2005 Enterprise server is. This document is helpful but I'm a bit confused:
http://msdn2.microsoft.com/en-us/library/ms143432.aspx
In the document, it says that the maximum database size is 524,258 terabytes; however, it also says that the maximum data file size--which I assume is the .MDF file--is 16 terabytes. My question is, how can you create a 524,258 TB database if the maximum file size 16 TB?
Dumb question, I'm sure...please enlighten me!
Norm
Hello! I'm trying to figure out what the ultimate size limitation for a SQL 2005 Enterprise server is. This document is helpful but I'm a bit confused:
http://msdn2.microsoft.com/en-us/library/ms143432.aspx
In the document, it says that the maximum database size is 524,258 terabytes; however, it also says that the maximum data file size--which I assume is the .MDF file--is 16 terabytes. My question is, how can you create a 524,258 TB database if the maximum file size 16 TB?
Dumb question, I'm sure...please enlighten me!
Norm
I try to limit the database size to 2MB by the following code, but it doesn't work, Could somebody help me on it?
Thanks a lot!
Part of my code is:
VariantInit(&dbprop[0].vValue);
VariantInit(&dbprop[1].vValue);
VariantInit(&dbprop[2].vValue);
VariantInit(&dbprop[3].vValue);
// Create an instance of the OLE DB Provider
//
hr = CoCreateInstance( CLSID_SQLSERVERCE_3_0,
0,
CLSCTX_INPROC_SERVER,
IID_IDBInitialize,
(void**)&pIDBInitialize);
if(FAILED(hr))
{
goto Exit;
}
// Initialize a property with name of database
//
dbprop[0].dwPropertyID = DBPROP_INIT_DATASOURCE;
dbprop[0].dwOptions = DBPROPOPTIONS_REQUIRED;
dbprop[0].vValue.vt = VT_BSTR;
dbprop[0].vValue.bstrVal = SysAllocString( DATABASE_LOG );
if(NULL == dbprop[0].vValue.bstrVal)
{
hr = E_OUTOFMEMORY;
goto Exit;
}
// Initialize property with open mode for database
dbprop[1].dwPropertyID = DBPROP_INIT_MODE;
dbprop[1].dwOptions = DBPROPOPTIONS_REQUIRED;
dbprop[1].vValue.vt = VT_I4;
dbprop[1].vValue.lVal = DB_MODE_READ | DB_MODE_WRITE;
// Set max database size
dbprop[2].dwPropertyID = DBPROP_SSCE_MAX_DATABASE_SIZE;
dbprop[2].dwOptions = DBPROPOPTIONS_REQUIRED;
dbprop[2].vValue.vt = VT_I4;
dbprop[2].vValue.lVal = 2; // 2MB
// set max size of temp. database file to 2MB
dbprop[3].dwPropertyID = DBPROP_SSCE_TEMPFILE_MAX_SIZE;
dbprop[3].dwOptions = DBPROPOPTIONS_REQUIRED;
dbprop[3].vValue.vt = VT_I4;
dbprop[3].vValue.lVal = 2; // 2MB
// Initialize the property set
//
dbpropset[0].guidPropertySet = DBPROPSET_DBINIT;
dbpropset[0].rgProperties = dbprop;
dbpropset[0].cProperties = sizeof(dbprop)/sizeof(dbprop[0]);
// Get IDBDataSourceAdmin interface
//
hr = pIDBInitialize->QueryInterface(IID_IDBDataSourceAdmin, (void **) &pIDBDataSourceAdmin);
if(FAILED(hr))
{
goto Exit;
}
// Create and initialize data store
//
hr = pIDBDataSourceAdmin->CreateDataSource( 1, dbpropset, NULL, IID_IUnknown, &pIUnknownSession);
if(FAILED(hr))
{
goto Exit;
}
I have some code I build 2 weeks ago which I’ve been running daily but it’s suddenly stopped working with the following error.
“The table "tbl_Intraday_Tmp" has been created, but its maximum row size exceeds the allowed maximum of 8060 bytes. INSERT or UPDATE to this table will fail if the resulting row exceeds the size limit” When I google this there seems to be a related to tables with vast numbers of columns.
My table tbl_Intraday_tmp is relatively small. It has 7 columns. 1 of varchar(5), 3 of decimal(9,3) and 2 of decimal(18,0). The bit I’m puzzled with is it was working and stopped.
I don’t recall changing anything but I wouldn’t rule that out. I ‘ve inspected the source files and I don’t believe they have changed either.
DECLARE
@FileName varchar(50),
@Path varchar(50),
@SqlCmd varchar(1000)
= '',
@ASXCode varchar(5),
@Offset decimal(18,0),
[code]....
I am using MS SQL server 2008, and i have a table with 350 columns and when i m trying to create one more column its giving error with below message -
Warning: The table XXX has been created, but its maximum row size exceeds the allowed maximum of 8060 bytes.
INSERT or UPDATE to this table will fail if the resulting row exceeds the size limit.
how can i resolve this?
I'm getting this error while trying to insert records into a SQL Server Compact Edition database. I have pasted my connection string that was used when creating the database as well as for accessing that same database from my Windows application.
Thanks for any help any of you can give!
Data Source=OnTheGo.sdf;Encrypt Database=True;Password=<password>;Max Database Size=4091
How much data we can pass through as an XML Text into SP by the concept OPENXML
Is there any limit to the maximum size of a datafile or transaction log you can have with SQL Server 2000 on Windows 2000. Also is there a maximum size that should be adhered to for performance and admin reasons ?.
View 4 Replies View Related
Hi, All,
if I set the "Maximum insert commit size" to 10 ( 0 is the default) in a OLE destination,
what does the 10 means? 10 records or 10 MB/KB of data?
Thanks
Hi,
I'd like to replicate an SQL Server Database to an SDF file. For Simplicity I want to use the SQL Server 2005 Management Console. The Console reports that the maximum buffer size were to small. In the comment (c# code) I can see it is set to 512. How can I increase the value in the replication assistant?
Miroslaw
Does the IDENTITY field type in SQL have a maximum size to it?
You know like int only goes so high up,
I couldn't insert more than 4000 charachters in "ntext" type in SQL server. Is there anyway, i can increase the size or any suggestions?
View 7 Replies View RelatedMicrosoft OLE DB Provider for ODBC Drivers error ' 80040e14'
[Microsoft][ODBC SQL Server Driver][SQL Server]Updated or inserted row is bigger than maximum size (1962 bytes) allowed for this table.
database:microsoft 6.5 SQL
How can I solve this problem
thanks,shay
In SSIS, what is the maximum size of the String variable (one that you would define in the Variables dialog box)?
One of our production databases was setup mirroring, log shipping and replication on it, the log file was setup unrestricted growth. This morning one index rebuilding process generated lots of logs, and the log file disk ran out of space, the database was in recovery mode. so we had to disable log shipping, pause mirroring and replication, expand log file disk, restarted SQL instance to fix the issue. Now we want to setup the log file to maximum size 80G, the whole log file disk is 120G.
So if the log file reached 80G next time, we can change the max size to 90G or 100G and it's easier to fix the space issue. My question is, if the database log file reached max size,
1. is the database still available?
2. Will the active session causing the issue be rollback to release space back?
I'm seeing some strange behavior from the OLE DB Destination when using the "fast load" access mode and setting the "Maximum insert commit size".
When I do not set the "Rows per batch" or the "Maximum insert commit size", the package I'm working with inserts 123,070 rows using a single "insert bulk" statement. The data seems to flow through the pipeline until it gets to the OLE DB Destination and then I see a short pause. I'm assuming the pause is from the "insert bulk" statement handling all of the rows at once.
When I set the "Rows per batch" option but leave the "Maximum insert commit size" alone, I generally see the same behavior -- a single "insert bulk" statement that handles all 123,070. In this case, however, the "insert bulk" statement has a "ROWS_PER_BATCH" option appended to the statement that matches the "Rows per batch" setting. This makes sense. I'm assuming the "insert bulk" then "batches" the rows into multiple insert statements (although I'm unsure of how to confirm this). This version of the "insert bulk" statement appears to run in about the same time as the case above.
When I set the "Maximum insert commit size" option and leave the "Rows per batch" statement alone, I see multiple "insert bulk" statements being executed, each handling the lower of either the value I specify for the "Maximum insert commit size" or the number of rows in a single buffer flowing through the pipeline. In my testing, the number of rows in a buffer was 9,681. So, if I set the "Maximum insert commit size" to 5,000, I see two "insert bulk" statements for each buffer that flows into the OLE DB Destination (one handling 5,000 rows and one handling 4,681 rows). If I set the "Maximum insert commit size" to 10,000, I see a single "insert bulk" statement for each buffer that flows into the OLE DB Destination (handling 9,681 rows).
Now the problem. When I set the "Maximum insert commit size" as described in the last case above, I see LONG pauses between buffers being handled by the OLE DB Destination. For example, I might see one buffer of data flow through (and be handled by one or more "insert bulk" statements based on the "Maximum insert commit size" setting), then see a 2-3 minute pause before the next buffer of data is handled (with its one or more "insert bulk" statements being executed). Then I might see a 4-5 minute pause before the next buffer of data is handled. The pause between the buffers being passed through the OLE DB Destination (and handled via the "insert bulk" statements) is sometimes shorter, sometimes longer.
Using Profiler, I don't see any other activity going on within the database or within SQL Server itself that would explain the pauses between the buffers being handled by the OLE DB Destination and the resulting "insert bulk" statements...
Can anyone explain what is going on here? Is setting the "Maximum insert commit size" a bad idea? What are the differences between it and the "Rows per batch" setting and what are the recommended uses of these two options to try to improve the performance of the insert (particularly when handling millions of rows)?
TIA for any thoughts or information...
Dave Fackler
I've just recently downloaded Visual Studio 2008 Express which comes with SQL Server 2005 Express and SQL Server Compact 3.5, both of which were installed when I installed the products.
I've been following the tutorial videos and trying some stuff of my own and I just can't seem to get a Compact 3.5 database to actually update! I'm doing EXACTLY what is shown in the tutorials and th dataset is being updated - changes and added records - and they will show up in a DataGrid control as expected, but when I accept the changes - nothing is changed and/or added to the actual .sdf file. When I open it again, it's the same as it was before. Using exactly the same code but with an SQL Server 2005 Express database (.mdf), updates are fine.
First I created a dataset that connects to the SSCE 3.5 database .SDF file. Then I simply drag the table from the dataset to the form which creates Dataset, Table Binding Source, Table Adapter Manager and BindingNavigator items, in addition to the toolbar and DataGrid controls. The code generated from this is below. I have added the Try/Catch block and messages to see if any errors are ocurring.
Code Snippet
Public Class Form3
Private Sub TblMessageTypeBindingNavigatorSaveItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TblMessageTypeBindingNavigatorSaveItem.Click
Me.Validate()
Me.TblMessageTypeBindingSource.EndEdit()
Try
Me.TableAdapterManager.UpdateAll(Me.AppMessagesDataSet)
MsgBox("Changes Saved")
Catch ex As Exception
MsgBox(ex.ToString)
End Try
End Sub
Private Sub Form3_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'TODO: This line of code loads data into the 'AppMessagesDataSet.tblMessageType' table. You can move, or remove it, as needed.
Me.TblMessageTypeTableAdapter.Fill(Me.AppMessagesDataSet.tblMessageType)
End Sub
End Class
When I run the app, the data in the database table is displayed correctly. If I make a change and add a record then click the Save button, I get the expected "Changes Saved" message indicating that there are no errors. When I look a the contents of the table, the changes and additions did not happen and the data is exactly the way it was before.
I had the full SQL Serer 7.0 installed as well so I thought there might be a conflict or something became corrupted. In uninstalled SQL Server 7.0, SQL Server 2005 Express and SQL Server Compact 3.5. I "repaired" VB 2008 Express which reinstalled SQL Server Compact 3.5 and separately reinstalled SQL Server 2005 Express. Same problem.
As I mentioned above, what gets me is that if I use the same setup for a SQL Server 2005 Express database, changes and inserts work just fine. (Used the Northwind.mdf (Express) and the Northwind.sdf (Compact) sample databases and created my own sample .mdf and .sdf databases - same results.)
I've looked at whatever I can to see if I can find the problem but just can't put my finger on it. Very frustrating.
Does anyone have any advice on what I might be doing wrong with Compact or if there is something I've missed or if there's a property somewhere that needs to be set, or perhaps a configuration issue??
Many thanks,
Ben
what is the maximum size of a DB hosted on SQL 2012 cloud environment?
View 3 Replies View RelatedHi All
I am running a script which has a table creation. The table gets created, but with the below warning.
Warning: The table 'PropertyInstancesAudits' has been created but its maximum row size (8190) exceeds the maximum number of bytes per row (8060). INSERT or UPDATE of a row in this table will fail if the resulting row length exceeds 8060 bytes.
Structure is as under:
Code SnippetCREATE TABLE [dbo].[PropertyInstancesAudits] (
[PIA_ClassID] [uniqueidentifier] NOT NULL ,
[PIA_ClassPropertyID] [uniqueidentifier] NOT NULL ,
[PIA_InstanceID] [uniqueidentifier] NOT NULL ,
[PIA_Value] [sql_variant] NOT NULL ,
[PIA_StartModID] [bigint] NOT NULL ,
[PIA_EndModID] [bigint] NOT NULL ,
[PIA_SuserSid] [varbinary] (85) NULL
) ON [PRIMARY]
GO
How should I get rid of this?
What tool should I use to view SQL Server Compact Edition database?
I have VS2008 Professional, but I didn't find any tool in the installation. So I tried to install the SQL Server Developer Edition, which is included in the VS2008 package, but the installation has quit saying the that there is nothing to upgrade (there is probably newer version of SQL installed by VS2008 itself).
I also tried to download and install SQL Server Managment Studio Express. The installation went well, but then I wasn't able to select any SSCE database (there was only SQL Server Express or something like that selectable).
Is there anything else I should do?
Hello
I am writing a Desktop application accessing a SSCE database. I am running Windows XP SP2, VS2005 SP1, and have SQLServerCE3.1 installed. Debugging the application shows that ds.m_spInit->QueryInterface() returns E_NOINTERFACE. I have checked that SSCE runtime library is installed, IDBCreateSession uuid exists in the registry and m_spInit.CoCreateInstance(CLSID_SQLSERVERCE_3_0) return S_OK. Can you suggest me what need adding/installing to get the CSession.Open(datasource) working?
Thanks
Ares,
hi i'm having this error on my application"cannot allocate more connection.connect pool is at maximum increase max pool size" the proble is when i do testing this error does not apply it only Appears when the application is been used by many people
How can I resolve this?
Thanks
Hi,
i use this script that show me the size of each table and do the sum of all the table size.
SELECT
X.[name],
REPLACE(CONVERT(varchar, CONVERT(money, X.[rows]), 1), '.00', '') AS [rows],
REPLACE(CONVERT(varchar, CONVERT(money, X.[reserved]), 1), '.00', '') AS [reserved],
REPLACE(CONVERT(varchar, CONVERT(money, X.[data]), 1), '.00', '') AS [data],
REPLACE(CONVERT(varchar, CONVERT(money, X.[index_size]), 1), '.00', '') AS [index_size],
REPLACE(CONVERT(varchar, CONVERT(money, X.[unused]), 1), '.00', '') AS [unused]
FROM
(SELECT
CAST(object_name(id) AS varchar(50)) AS [name],
SUM(CASE WHEN indid < 2 THEN CONVERT(bigint, [rows]) END) AS [rows],
SUM(CONVERT(bigint, reserved)) * 8 AS reserved,
SUM(CONVERT(bigint, dpages)) * 8 AS data,
SUM(CONVERT(bigint, used) - CONVERT(bigint, dpages)) * 8 AS index_size,
SUM(CONVERT(bigint, reserved) - CONVERT(bigint, used)) * 8 AS unused
FROM sysindexes WITH (NOLOCK)
WHERE sysindexes.indid IN (0, 1, 255)
AND sysindexes.id > 100
AND object_name(sysindexes.id) <> 'dtproperties'
GROUP BY sysindexes.id WITH ROLLUP) AS X
ORDER BY X.[name]
the problem is that the sum of all tables is not the same size when i make a full database backup.
example of this is when i run this query against my database i see a sum of 111,899 KB that they are 111MB,but when
i do full backup to that database the size of this full backup is 1.5GB,why is that and where this size come from?
THX
How many database a single SQL server can manage. Assume that I have enough hard disk space. (eg. 25 MB DB can I have 500 databases). What should be accurate setting required for SQL server configuration like open database, objects, locks, connections etc.
Help me out with suggestions and proper source of Information for the above.
Thanks
Rajasekar
How many maximum database's can we have in AlwaysON Availability Group?
View 3 Replies View RelatedHi I would like to know, what is the maximum number of database that you can create in one SQL 2005 Instance?
View 5 Replies View RelatedSQL Server 2000 8.00.760 (SP3)I've been working on a test system and the following UDF worked fine.It runs in the "current" database, and references another database onthe same server called 127-SuperQuote.CREATE FUNCTION fnGetFormattedAddress(@WorkID int)RETURNS varchar(130)ASBEGINDECLARE@Address1 As varchar(50)@ReturnAddress As varchar(130)SELECT@Address1 = [127-SuperQuote].dbo.tblCompany.Address1FROM[Work] INNER JOIN[127-SuperQuote].dbo.tblCompany ON [Work].ClientID =[127-SuperQuote].dbo.tblCompany.CompanyIDWHERE[Work].WorkID = @WorkIDIF @Address1 IS NOT NULLSET @ReturnAddress = @ReturnAddress + @Address1 + CHAR(13)+ CHAR(10)RETURN @ReturnAddressENDSo now the system has gone live and it turns out that the live"SuperQuote" database is on a different server.I've linked the server and changed the function as below, but I get anerror both in QA and when checking Syntax in the UDF builder:The number name 'Zen.SuperQuote.dbo.tblCompany' contains more than themaximum number of prefixes. The maximum is 3.CREATE FUNCTION fnGetFormattedAddress(@WorkID int)RETURNS varchar(130)ASBEGINDECLARE@Address1 As varchar(50)@ReturnAddress As varchar(130)SELECT@Address1 = Zen.SuperQuote.dbo.tblCompany.Address1FROM[Work] INNER JOINZen.SuperQuote.dbo.tblCompany ON [Work].ClientID =Zen.SuperQuote.dbo.tblCompany.CompanyIDWHERE[Work].WorkID = @WorkIDIF @Address1 IS NOT NULLSET @ReturnAddress = @ReturnAddress + @Address1 + CHAR(13)+ CHAR(10)RETURN @ReturnAddressENDHow can I get round this? By the way, I've rather simplified thefunction to ease readability. Also, I haven't posted any DDL because Idon't think that's the problem!ThanksEdward
View 2 Replies View RelatedCan any one help me, i'm building a dynamic database driven site using dreamweaver and MS SQL2000 andi'm haveing problem storing over 8000 characters in a table filed (IE: it wont let me!!) is there a special table field value that i need to set to get more characters in a table field or is this a limitation of SQL.
Any help or suggestions would be appreciated
Regards
B
Is there any maximum cap on the number of users that could be created in a given database of MS-SQL Server?
View 4 Replies View Relatedwhat is maximum no. of concurrent Logins Possible on a SQL server 2005 Database?
View 3 Replies View Related
I am trying to resize a database initial log file from 500M to 2M. Im using?
ALTER DATABASE <DBNAME> MODIFY FILE ( NAME = <DBLOGFILENAME, SIZE = 2 ) "
And I'm getting "MODIFY FILE failed. Specified size is less than current size." I tried going into the database properties and setting the log file to 2M, but it doesnt keep the changes.
Any help with this process?
Hi
Does anyone have an example code in C++ to create a SSCE db and access data?
Many thanks
Ozzie