What Is The Query To Kown The Collate Of The Database ?
Sep 14, 2006What is the SQL query or stored procedure to kown the collate of the database ?
Thanks
ADVERTISEMENT
Alter Database/collate Error
Dec 6, 2007We're upgrading to SQL Server 2005, and we've restored databases from SQL Server 2000 to the development server (SQL Server 2005). Part of what we need to do is alter the database collation to SQL_Latin1_General_CP1_CI_AS; our SQL Server 2000 server is case-sensitive.
My initial attempts to alter the database;
alter database RGDWDEV collate SQL_Latin1_General_CP1_CI_AS
failed because of the presence of computed columns and user functions. So, I wrote scripts to save the definitions of the computed columns and functions, and wrote scripts to drop them. Now that they are gone, I expected to be able to successfully execute the above 'alter database' statement, but I am now getting this error;
Msg 1505, Level 16, State 1, Line 1
CREATE UNIQUE INDEX terminated because a duplicate key was found for object name 'sys.sysschobjs' and index name 'nc1'. The duplicate key value is (0, 1, DISB_ADJ).
Msg 5072, Level 16, State 1, Line 1
ALTER DATABASE failed. The default collation of database 'RGDWDEV' cannot be set to SQL_Latin1_General_CP1_CI_AS.
I do not know how to fix this.
Can anyone help me?
thank you, beth
Can't Change The Currente Collate Of My Database
Nov 5, 2007Hi, i'm having a problem with my database. When i created it i specifie the collate sql_latin1_general_cp1_ci_as but now that i'm working on my domain server, the server only acepts databases with the collate latin1_general_ci_as so i tried to change my current (on my localhost) collate but i'm always getting this error:
Msg 5030, Level 16, State 2, Line 2
The database could not be exclusively locked to perform the operation.
Msg 5072, Level 16, State 1, Line 2
ALTER DATABASE failed. The default collation of database 'databasexpto' cannot be set to Latin1_General_CI_AS.
How can i do it?
Alter Database Model COLLATE SQL_Latin1_General_CP1_CI_AS
Jun 8, 2005Hi folks,
I do not have a backup of the model database and have had to rebuild SQL Server 2000 once already. All my databases except model and tempdb have the collation SQL_Latin1_General_CP1_CI_AS those two have Latin1_General_CI_AS.
During SQL rebuild I've restored over master and msdb and they work fine. Only came across problem with stored procedure and I'm lost as to how to alter model without a backup of it.
Any easy way to change model collation?
The command listed in subject fails as it is a system table.
Is it as simple as going into single user mode and trying that command again?
Help please this is day 3 of my little nightmare.
Collate
Jun 4, 2002Can you use "COLLATE" (see below) on SQL Server 7? I get "incorrect syntax" error?
CREATE TABLE [dbo].[CellFormat] (
[Category] [nvarchar] (32) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
[BackColor] [nvarchar] (25) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[FontColor] [nvarchar] (25) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[BackColorDesc] [nvarchar] (25) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[FontColorDesc] [nvarchar] (25) COLLATE SQL_Latin1_General_CP1_CI_AS NULL
) ON [PRIMARY]
Thanks,
strat
Collate In SQL 8.0
Jul 17, 2002Have an old DB (6.5) Upgrade to (8.0). And when i make a script from the SQL.8 to the backup server i gett Collate Errors. So i wonder if there are someway to script the Table without the Collate´s or if i can make som settings on the Backup server so it will accept Collate in the script..
Best Regards Johan
COLLATE Problem
Feb 8, 2008Hi!
I have an application that access an SQL Server database with collate Turkish_CI_AS.
The application work fine (I have special attention with the 'i'/'I' problem).
We sended our application to some partners, that have the collate of their server as Turkish_CI_AI.
One of the database are alread with this collate, and one is create during installation, with the Turkish_CI_AS collate.
And they get some wird problems, like the message "Item cannot be found in collection corresponding to the requested name or ordinal".
Can someone bring me some "light" please? :)
I'm using SQL Server 2000, some stored procedures and an Delphi 7.0 application.
Thanks in advance and sorry for be so newbe ;)!
What's COLLATE Latin1_General_BIN?
Mar 6, 2008I am new to Stored Procedure, so I want to find out what is COLLATE Latin1_General_BIN means?
For example:
Declare @Var_Tbl Table
(CUSTID INT NOT NULL,
FIRSTNAME VARCHAR(20) COLLATE Latin1_General_BIN NOT NULL,
CUSTOMER VARCHAR(9) COLLATE Latin1_General_BIN NOT NULL
)
Any helps would appreciated.
NLD
How To Change The Collate?
Mar 3, 2008
I have created SQL Compact .sdf file and i want to change the collate for it now to Arabic?
how can i do that?
Need Idea About COLLATE
Sep 12, 2007I need help regarding what is a collate and where to use.If any examples with INNER JOIN it could be more helpful....
View 13 Replies View RelatedSyntax Error Near 'COLLATE'
May 19, 2004I am attempting an import of an SQL DB from a local MSDE SQL Server to an SQLServer 2000. I used the Web Data Administrator to create an export file, and then I wanted to perform an import to the actual server. I get the error "Syntax error near 'COLLATE'". I don't know much about syntax when it comes to this. Here is a snippet from there. I am new to this, so I hope someone out there can help me out.
CREATE DATABASE [NewDB] ON (NAME = N'NewDB', FILENAME = N'CORRECTFILEPATH' , SIZE = 3, FILEGROWTH = 10%) LOG ON (NAME = N'NewDB_log', FILENAME = N'CORRECTFILEPATH' , SIZE = 1, FILEGROWTH = 10%)
COLLATE SQL_Latin1_General_CP1_CI_AS
GO
All the "N" don't look like they belong, but they have been added throughout the entire SQL document.
Stored Procedure And A DB With Collate That Is CI...
Oct 12, 2006i have a sp that when i add to a CS database it doesnt give me an error but when i add to a CI database it errors out.
what can i do to it to make it not error on the CI situtation?
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
-- Accounts Payable
ALTER PROCEDURE [dbo].[isp_ap_calc_apt_totals]
@p_comp char(2),
@p_vend char(6),
@p_asofdate char(8)
as
if (@p_asofdate <= '00000000')
begin
set @p_asofdate = '99999999'
end
delete from XAPAPTTOT
where xapt_comp = @p_comp and xapt_vend = @p_vend and xapt_asof_date = @p_asofdate
insert into XAPAPTTOT
select apph_comp, apph_vend, apph_type, apph_id, @p_asofdate,
sum(apph_paymnts),
sum(apph_discts),
sum(apph_adjts),
count(apph_paymnts),
sum(apph_paymnts)+ sum(apph_discts) + sum(apph_adjts) +
(select apt_gross from APTRANF
where apt_comp = @p_comp and apt_vend = @p_vend
and apt_type = apph_type and apt_id = apph_id),
0,
max(str(yy,4) + replace(str(mm,2),' ','0') + replace(str(dd,2),' ','0'))
from APPHISTF
where apph_comp = @p_comp and apph_vend = @p_vend
and str(yy,4) + replace(str(mm,2),' ','0') + replace(str(dd,2),' ','0') <= @p_asofdate
group by apph_comp, apph_vend, apph_type, apph_id
update XAPAPTTOT
set xapt_last_payck =
(select max(apph_payck) from APPHISTF
where apph_comp = xapt_comp and apph_vend = xapt_vend and apph_type = xapt_type
and apph_id = xapt_id
and str(yy,4) + replace(str(mm,2),' ','0') + replace(str(dd,2),' ','0') = xapt_last_paydt )
where xapt_comp = @p_comp and xapt_vend = @p_vend and xapt_asof_date = @p_asofdate
Collate SQL_Latin1_General_CP850_BIN To SQL_Latin1_General_CP1_CI_AS
Jul 23, 2005Hi, I have a SQL Server for a SAP database with the collationSQL_Latin1_General_CP850_BIN. When I connect to that server (or, inthis example, to another server with the SQL_Latin1_General_CP850_BINcollation) and execute a select, the accents seem weird:select t.TEXTfrom [GC-SAP02].P01.p01.AGR_TEXTS twhere t.MANDT = '300'and t.SPRAS = 'E'and t.AGR_NAME = 'ZCD_GEST_DEUDA_PATENTE_SD'TEXT-----------------------------------Gesti¾n de deudas patentes en SD UP(1 row(s) affected)But if I connect to a "normal" SQL Server with aSQL_Latin1_General_CP1_CI_AS collation, and execute the same selectthru a linked server:TEXT-----------------------------------Gestión de deudas patentes en SD UP(1 row(s) affected)I need to perform the select connected to theSQL_Latin1_General_CP850_BIN and get the results as I were connected tothe SQL_Latin1_General_CP1_CI_AS server. I tried with cast and collate,but I can't get it to work:select t.TEXT collate SQL_Latin1_General_CP1_CI_ASfrom [GC-SAP02].P01.p01.AGR_TEXTS twhere t.MANDT = '300'and t.SPRAS = 'E'and t.AGR_NAME = 'ZCD_GEST_DEUDA_PATENTE_SD'Any ideas??? Thanks in advance for your help !!!Manuel Daponte
View 1 Replies View RelatedHow To Get All Collate In SQL Server That Installed In My System ???
Jul 4, 2007I created DB Generator and want to enable user choose collate which desired.
So I would like to retreive all collate in SQL Server to show for user can see all available collate.
Please give me some idea......
Why Do We Need To Collate One Column While Creating Table?
Apr 21, 2008Hi,Good morning to All.
I have some doubt.I cannot do anything without knowing the reason why we are doing that particular thing.
Any way, my doubt is:
While creating table, in some places I see COLLATE clause.
For example, recently I have seen this.
CREATE TABLE dbo.OrderDetails( OrderDetailID INT IDENTITY(1,1) NOT NULL, ItemNumber VARCHAR(20) COLLATE SQL_Latin1_General_CP1_CI_As NULL, Qty INT NULL)ON [PRIMARY]
In the above table, why the Collate clause for ItemNumber column? What is the advantage with that clause?I have seen sql server help for this. I have found 1011 results for the query SELECT * FROM fn_helpcollations().Then I searched for SQL_Latin related collations using: SELECT * FROM fn_helpcollations() where name like 'SQL_Latin%'I have found 31 results.How can I know which clause i have to use for which type of query?
Can anybody please tell answers for all these doubts?
Thanks in advance.
Regards,Ashok kumar.
COLLATE Error In DTS File Import
Mar 19, 2001I am getting an error inserting a simple text file into a SQL2000 database table.
The text file is one column, comma delimited, and the DTS package to insert it into a table fails citing an error executing a 'COLLATE' statement.
Thanks for the help!
Search Transformation - Collate Issues
Sep 6, 2007
Hi,
I'm trying to do a search over a table, the problem is that the default collate applied by this transofrmation is case sensitive... i need a non case sensitive collate. If i edit the SQL Statement to set another Case sensitive collate manually inside the statement, the problem is that if a field (wich is involved in search transformation ) has a null value, the transformation doesnt find any record (it doesnt happens if a dont introduce manually the collate in the statement, null values dont rise any error, and the transofrmation works fine).
Sorry for my english lol.
Transact SQL :: CASE WHEN - Adding Collate Into It
Aug 20, 2015Tried a few ways and I can ge this to work at the end in then WHEN part. Just struggling to put this together to be accepted as a CASE WHEN statement, probably missing the obvious.
Case when Postcode like '%[abcdefghijklmnopqrstuvwxyz%]' then 'Lowercase Postcode' else 'Postcode OK' end as [DQPostcode]
collate Latin1_General_CS_AS
Simple terms looking for all instances of Lowercase characters in the Postcode field
Change Collations In Many Tables Defined Using COLLATE
Jun 9, 2004I have (inherited a) a db with lots of tables looking like the definition at the end of the message.
I need to change all these tables, so that all the textual fields follow the default DB collation.
Any help appreciated!
THANX...
CREATE TABLE [Club] (
[id] [int] NOT NULL ,
[name] [varchar] (100) COLLATE Greek_CI_AS NOT NULL ,
[address] [varchar] (255) COLLATE Greek_CI_AS NULL ,
[zoomAreaId] [int] NULL ,
[phone] [varchar] (255) COLLATE Greek_CI_AS NULL ,
[contact] [varchar] (50) COLLATE Greek_CI_AS NULL ,
[clubCategoryId] [int] NULL ,
[unused] [varchar] (2) COLLATE Greek_CI_AS NULL ,
[monday] [int] NULL ,
[tuesday] [int] NULL ,
[wednesday] [int] NULL ,
[thursday] [int] NULL ,
[friday] [int] NULL ,
[saturday] [int] NULL ,
[sunday] [int] NULL ,
[comments] [text] COLLATE Greek_CI_AS NULL ,
[URL] [varchar] (255) COLLATE Greek_CI_AS NULL ,
[image] [varchar] (50) COLLATE Greek_CI_AS NULL ,
[priceCategoryId] [int] NULL ,
[ratingId] [int] NULL ,
[entryDate] [datetime] NULL ,
[WAPText] [varchar] (255) COLLATE Greek_CI_AS NULL ,
[SMSText] [varchar] (160) COLLATE Greek_CI_AS NULL ,
[SMSAddress] [varchar] (50) COLLATE Greek_CI_AS NULL ,
[active] [bit] NOT NULL ,
[content_id] [bigint] NULL ,
[disp_as_propos] [bit] NULL ,
[date2disp] [datetime] NULL
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
Collate Problem In Windows 2003 Server
Mar 14, 2008
I build a asp.net web site on my laptop and accessting data with my vb.net code from SQL server 2005 which is installed on windows 2003 R2 server. All works fine.
but when I hosted this website on the IIS server which is physically the same Windows 2003 Server R2 with SQL Server 2005, the sql queries are not executing well and not getting the result. After some R&D What I found is that the Column Names CASE in the SQL Database and in my SQL Query is not matching. I find that SQL server 2005 collate is allready set to SQL_Latin1_General_CP1_CI_AS. I have lots of pages with lots of sql queries and near about 500 SQL Databases, and its quiet tuff to match all columns CASING.
1. How can I change the collate of windows 2003 server R2?
or
2. How can I run my wesite on this Server properly?
3. What is actually going on (website working on Windows XP but not working well on Windows 2003 server).
Expression Type Numeric Is Invalid For COLLATE Clause
Oct 16, 2013I have a query however i am getting the following error message “Msg 447, Level 16, State 0, Line 1 Expression type numeric is invalid for COLLATE clause.“
This is my query
SELECT
sjo.ID,
sjo.MID,
sjo.Trade_Association_Name,
da1.Account_Name As Trade_Association_Name,
substring(do.[MM-CHN-AGENT],2,12) as Mass_Agent_Chain_No,
[Code] ....
And Dan.Stg_Jitter_Opp2 table consists of the following
ColumnNameData Type
Idvarchar(50)
Mid numeric(18, 0)
RecordTypeIDvarchar(50)
Trade_Association_Name varchar(50)
And [FDMS].[SalesForce].[DailyAccounts]table consists of the following
ColumnNameData Type
Idint
Account_Idvarchar(18)
account_Name varchar(150)
mid_externalvarchar(15)
Mid_internalvarchar(15)
Question About User Defined Data Type And 'COLLATE SQL_Latin1_General_CP1_CI_AS'
Apr 8, 2004What is 'COLLATE SQL_Latin1_General_CP1_CI_AS'? I am new to
SQLServer, and couldn't find much information on the Web. Also,
I am trying to understand user defined data types. For example,
In the following example, what is '[Price_DT]' data type? and how would
it be referenced at the time of 'INSERT'.
CREATE TABLE [dbo].[Dist_Orders_Master_Index] (
[SubTotal] [Price_DT] NOT NULL ,
[Tax] [Price_DT] NOT NULL
) ON [PRIMARY]
Stored Procedure Dbo.SalesByCategory Of Northwind Database: Enter The Query String - Query Attempt Failed. How To Do It Right?
Mar 25, 2008Hi all,
In the Programmability/Stored Procedure of Northwind Database in my SQL Server Management Studio Express (SSMSE), I have the following sql:
USE [Northwind]
GO
/****** Object: StoredProcedure [dbo].[SalesByCategory] Script Date: 03/25/2008 08:31:09 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[SalesByCategory]
@CategoryName nvarchar(15), @OrdYear nvarchar(4) = '1998'
AS
IF @OrdYear != '1996' AND @OrdYear != '1997' AND @OrdYear != '1998'
BEGIN
SELECT @OrdYear = '1998'
END
SELECT ProductName,
TotalPurchase=ROUND(SUM(CONVERT(decimal(14,2), OD.Quantity * (1-OD.Discount) * OD.UnitPrice)), 0)
FROM [Order Details] OD, Orders O, Products P, Categories C
WHERE OD.OrderID = O.OrderID
AND OD.ProductID = P.ProductID
AND P.CategoryID = C.CategoryID
AND C.CategoryName = @CategoryName
AND SUBSTRING(CONVERT(nvarchar(22), O.OrderDate, 111), 1, 4) = @OrdYear
GROUP BY ProductName
ORDER BY ProductName
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
From an ADO.NET 2.0 book, I copied the code of ConnectionPoolingForm to my VB 2005 Express. The following is part of the code:
Imports System.Collections.Generic
Imports System.ComponentModel
Imports System.Drawing
Imports System.Text
Imports System.Windows.Forms
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.Common
Imports System.Diagnostics
Public Class ConnectionPoolingForm
Dim _ProviderFactory As DbProviderFactory = SqlClientFactory.Instance
Public Sub New()
' This call is required by the Windows Form Designer.
InitializeComponent()
' Add any initialization after the InitializeComponent() call.
'Force app to be available for SqlClient perf counting
Using cn As New SqlConnection()
End Using
InitializeMinSize()
InitializePerfCounters()
End Sub
Sub InitializeMinSize()
Me.MinimumSize = Me.Size
End Sub
Dim _SelectedConnection As DbConnection = Nothing
Sub lstConnections_SelectedIndexChanged(ByVal sender As Object, ByVal e As EventArgs) Handles lstConnections.SelectedIndexChanged
_SelectedConnection = DirectCast(lstConnections.SelectedItem, DbConnection)
EnableOrDisableButtons(_SelectedConnection)
End Sub
Sub DisableAllButtons()
btnAdd.Enabled = False
btnOpen.Enabled = False
btnQuery.Enabled = False
btnClose.Enabled = False
btnRemove.Enabled = False
btnClearPool.Enabled = False
btnClearAllPools.Enabled = False
End Sub
Sub EnableOrDisableButtons(ByVal cn As DbConnection)
btnAdd.Enabled = True
If cn Is Nothing Then
btnOpen.Enabled = False
btnQuery.Enabled = False
btnClose.Enabled = False
btnRemove.Enabled = False
btnClearPool.Enabled = False
Else
Dim connectionState As ConnectionState = cn.State
btnOpen.Enabled = (connectionState = connectionState.Closed)
btnQuery.Enabled = (connectionState = connectionState.Open)
btnClose.Enabled = btnQuery.Enabled
btnRemove.Enabled = True
If Not (TryCast(cn, SqlConnection) Is Nothing) Then
btnClearPool.Enabled = True
End If
End If
btnClearAllPools.Enabled = True
End Sub
Sub StartWaitUI()
Me.Cursor = Cursors.WaitCursor
DisableAllButtons()
End Sub
Sub EndWaitUI()
Me.Cursor = Cursors.Default
EnableOrDisableButtons(_SelectedConnection)
End Sub
Sub SetStatus(ByVal NewStatus As String)
RefreshPerfCounters()
Me.statusStrip.Items(0).Text = NewStatus
End Sub
Sub btnConnectionString_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnConnectionString.Click
Dim strConn As String = txtConnectionString.Text
Dim bldr As DbConnectionStringBuilder = _ProviderFactory.CreateConnectionStringBuilder()
Try
bldr.ConnectionString = strConn
Catch ex As Exception
MessageBox.Show(ex.Message, "Invalid connection string for " + bldr.GetType().Name, MessageBoxButtons.OK, MessageBoxIcon.Error)
Return
End Try
Dim dlg As New ConnectionStringBuilderDialog()
If dlg.EditConnectionString(_ProviderFactory, bldr) = System.Windows.Forms.DialogResult.OK Then
txtConnectionString.Text = dlg.ConnectionString
SetStatus("Ready")
Else
SetStatus("Operation cancelled")
End If
End Sub
Sub btnAdd_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnAdd.Click
Dim blnError As Boolean = False
Dim strErrorMessage As String = ""
Dim strErrorCaption As String = "Connection attempt failed"
StartWaitUI()
Try
Dim cn As DbConnection = _ProviderFactory.CreateConnection()
cn.ConnectionString = txtConnectionString.Text
cn.Open()
lstConnections.SelectedIndex = lstConnections.Items.Add(cn)
Catch ex As Exception
blnError = True
strErrorMessage = ex.Message
End Try
EndWaitUI()
If blnError Then
SetStatus(strErrorCaption)
MessageBox.Show(strErrorMessage, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)
Else
SetStatus("Connection opened succesfully")
End If
End Sub
Sub btnOpen_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnOpen.Click
StartWaitUI()
Try
_SelectedConnection.Open()
EnableOrDisableButtons(_SelectedConnection)
SetStatus("Connection opened succesfully")
EndWaitUI()
Catch ex As Exception
EndWaitUI()
Dim strErrorCaption As String = "Connection attempt failed"
SetStatus(strErrorCaption)
MessageBox.Show(ex.Message, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
End Sub
Sub btnQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click
Dim queryDialog As New QueryDialog()
If queryDialog.ShowDialog() = System.Windows.Forms.DialogResult.OK Then
Me.Cursor = Cursors.WaitCursor
DisableAllButtons()
Try
Dim cmd As DbCommand = _SelectedConnection.CreateCommand()
cmd.CommandText = queryDialog.txtQuery.Text
Using rdr As DbDataReader = cmd.ExecuteReader()
If rdr.HasRows Then
Dim resultsForm As New QueryResultsForm()
resultsForm.ShowResults(cmd.CommandText, rdr)
SetStatus(String.Format("Query returned {0} row(s)", resultsForm.RowsReturned))
Else
SetStatus(String.Format("Query affected {0} row(s)", rdr.RecordsAffected))
End If
Me.Cursor = Cursors.Default
EnableOrDisableButtons(_SelectedConnection)
End Using
Catch ex As Exception
Me.Cursor = Cursors.Default
EnableOrDisableButtons(_SelectedConnection)
Dim strErrorCaption As String = "Query attempt failed"
SetStatus(strErrorCaption)
MessageBox.Show(ex.Message, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
Else
SetStatus("Operation cancelled")
End If
End Sub
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
I executed the code successfully and I got a box which asked for "Enter the query string".
I typed in the following: EXEC dbo.SalesByCategory @Seafood. I got the following box: Query attempt failed. Must declare the scalar variable "@Seafood". I am learning how to enter the string for the "SQL query programed in the subQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click" (see the code statements listed above). Please help and tell me what I missed and what I should put into the query string to get the information of the "Seafood" category out.
Thanks in advance,
Scott Chang
Query To Give All Table Sizes On A Database (was Query Help)
Mar 9, 2006Hi,
Does anyone has query to give all table sizes on a database?
Appreciate your help.
Thanks
Import Wizard - Using Query For Remote Database To Compare Local Database
Apr 10, 2008I am trying to use the Import Wizard to setup a daily job to import new records based on an ID field (PK). The source database is remote and a replica. I am inserting new records to update my table called the same thing. Both are SQL Native Client
Code Snippet
select *
from [CommWireless].[dbo].[iQclerk_SaleInvoicesAndProducts] as S1
join [IQ_REPLICA].[dbo].[iQclerk_SaleInvoicesAndProducts] as S2
on S1.SaleInvoiceID = S2.SaleInvoiceID
where S1.SaleInvoiceID > S2.SaleInvoiceID
When I parse the query, I keep getting an error message.
Deferred prepare could not be completed.
Statement(s) could not be prepared.
Invalid object name 'IQ_REPLICA.dbo.iQ_SaleInvoicesAndProducts'. (Microsoft SQL Native Client)
Anyone know an easy why to get this to work? Or should I add a create table to verify new records?
How To Query Database Roles In Some Database?
Mar 7, 2008How can I get all database roles from a specific database?
View 4 Replies View RelatedDatabase Query
Jun 7, 2008query to delete a single desired record among 100 identical records in sql server
consider
2 ravi
2 ravi
2 ravi
............................... like that 100 records are there now how to delete 46th record from table
Database Query
Mar 16, 2004Is it possible to return the column names from the database using a SQL query,
what i need to do is
SELECT * FROM FEATURES WHERE 'VALUE' = 'YES'
i have a table which has a list of features and if they are selected i store the value yes, otherwise no . i want to be able to display a list of the features from the tables which have the value yes ! is this possible?
Two Database Query Help
Mar 25, 2006Can someone show me how to write a query, that will allow me to create one record, from two record fond in two other databases?
Thanks
Query To Another Database
Nov 15, 2005Dear all,
View 3 Replies View RelatedHow To Use Query To Get Sql Database Properties
Oct 2, 2006Hi,I'm creating a User Interface to display Sql database Properties, but I cannot find the right query to retrieved the info on database properties. The status that I get is "ONLINE", but it should be "NORMAL". Cannot find the right query to get the date of last database backup, last transaction log backup, and maintenance plan, etc.. Please help me [:'(]
View 2 Replies View RelatedGet Values From Database Query
Jan 5, 2007I have written the following lines myConnection = New MySqlConnection("server=" + dbServer + "; user id=" + dbUserID + "; password=" + dbPassword + "; database=" + dbName + "; pooling=false;")
strSQL = "SELECT * FROM user where type=1;"
user table has name, tel, addr, id, type fieldsI would like to know how to use a string array to store the name in the result of strSQL?Thank you
How To Query For NULL In A Database
May 31, 2007
In my database, in a few tables there are NULL values in some of the columns. This is okay, but I need to know how to query for nulls. For example I tried the following query but it did not work:
select * from Employee where DateOfBirth =NULL
This did not work so I also tried the following:
select * from Employee where DateOfBirth ='NULL'
Neither of these worked. Can someone help me out?